Toward an optimisation of the reactive resin transfer molding process: thermo-chemico-mechanical coupled simulations, International Journal of Material Forming, vol.7, issue.2, pp.249-258, 2014. ,
URL : https://hal.archives-ouvertes.fr/hal-01007388
Simultaneous measurements of permeability and capillary pressure of thermosetting matrices in woven fabric reinforcements, Polymer composites, vol.12, issue.3, pp.146-152, 1991. ,
A methodology to reduce thermal gradients due to the exothermic reactions in composites processing, International journal of heat and mass transfer, vol.45, issue.8, pp.1675-1684, 2002. ,
Ecoulements capillaires et chargés dans les procédés d'´ elaboration de composites par aps et rmi. S01 Modélisation avancée en mécanique des solides et des fluides, 2015. ,
Modeling of heat transfer and unsaturated flow in woven fiber reinforcements during direct injection-pultrusion process of thermoplastic composites, Composites Part A: Applied Science and Manufacturing, vol.77, pp.310-318, 2015. ,
URL : https://hal.archives-ouvertes.fr/hal-01150735
Experimental investigation of the effect of fibermat architecture on the unsaturated flow in liquid composite molding, Journal of Composite Materials, vol.38, issue.1, pp.57-79, 2004. ,
Design and application of actively controlled injection schemes for resin-transfer molding, Composites Science and Technology, vol.61, issue.11, pp.1625-1637, 2001. ,
Moulage par injection de résinè a basse pression ou procédé rtm. Techniques de l'ingénieur, Plastiques et composites, issue.A3728, pp.3728-3729, 1991. ,
The effects of compression and pore size variations on the liquid flow characteristics in metal foams, Journal of fluids engineering, vol.124, pp.263-272, 2002. ,
Numerical simulation of void formation in lcm, Composites Part A: Applied Science and Manufacturing, vol.34, issue.6, pp.517-523, 2003. ,
URL : https://hal.archives-ouvertes.fr/hal-01942929
A finite element/control volume approach to mold filling in anisotropic porous media, Polymer composites, vol.11, issue.6, pp.398-405, 1990. ,
Fluid flow through granular beds, Transactions-Institution of Chemical Engineers, vol.15, pp.150-166, 1937. ,
Studies of mold filling and curing in the reaction injection molding process, AIChE Journal, vol.28, issue.2, pp.250-260, 1982. ,
Modeling nonisothermal impregnation of fibrous media with reactive polymer resin, Polymer Engineering & Science, vol.32, issue.5, pp.310-318, 1992. ,
Modeling of filtration through multiple layers of dual scale fibrous porous media, Polymer composites, vol.27, issue.5, pp.570-581, 2006. ,
Unidirectional compression of fibre reinforcements. part 2: A continuous permeability tensor measurement, Composites Science and Technology, vol.67, issue.3, pp.638-645, 2007. ,
DOI : 10.1016/j.compscitech.2006.08.017
URL : https://hal.archives-ouvertes.fr/hal-01666056
Spatially homogeneous gelation in liquid composite molding, Polymer engineering and science, vol.42, issue.8, p.1667, 2002. ,
URL : https://hal.archives-ouvertes.fr/hal-01007315
Mécanique expérimentale des fluides, 1964. ,
On the curing kinetics of unsaturated polyesters with styrene, Journal of Applied Polymer Science, vol.28, issue.2, pp.485-499, 1983. ,
Modeling of high speed rtm injection with highly reactive resin with on-line mixing, Composites Part A: Applied Science and Manufacturing, vol.42, issue.10, pp.1390-1397, 2011. ,
On-line mixing during injection and simultaneous curing in liquid composite molding processes, Polymer composites, vol.26, issue.1, pp.74-83, 2005. ,
An efficient solver of the saturation equation in liquid composite molding processes, International journal of material forming, vol.3, issue.2, pp.1295-1302, 2010. ,
A two-phase flow model to simulate mold filling and saturation in resin transfer molding, International Journal of Material Forming, vol.9, issue.2, pp.229-239, 2016. ,
Permeability of unidirectional reinforcements for rtm, Journal of composite materials, vol.26, issue.8, pp.1100-1133, 1992. ,
Experimental investigation of high fiber tow count fabric unsaturation during rtm, Composites Science and Technology, vol.66, issue.7, pp.976-982, 2006. ,
A new numerical procedure to predict dynamic void content in liquid composite molding, Composites Part A: applied science and manufacturing, vol.37, issue.11, pp.1961-1969, 2006. ,
Consolidation experiments for laminate composites, Journal of Composite Materials, vol.21, issue.7, pp.650-669, 1987. ,
Non-crimp fabrics, p.673, 2004. ,
Dynamique desécoulementsdesécoulements en milieux poreux doublé echelle, Comptes Rendus de l'Académie des Sciences-Series IIB-Mechanics-Physics-Astronomy, vol.327, issue.11, pp.1171-1177, 1999. ,
DOI : 10.1016/s1287-4620(00)88521-x
Gas transport in fibrous media: Application to in-plane permeability measurement using transient flow, Journal of Composite Materials, vol.47, issue.18, pp.2237-2247, 2013. ,
URL : https://hal.archives-ouvertes.fr/emse-00959603
Curing kinetics and chemorheology of epoxy/anhydride system, Journal of Applied Polymer Science, vol.90, issue.11, pp.3012-3019, 2003. ,
Kinetics and thermal characterization of thermoset cure, Polymer Engineering & Science, vol.13, issue.1, pp.59-64, 1973. ,
Flow and cure phenomena in liquid composite molding, Polymer composites, vol.15, issue.5, pp.334-348, 1994. ,
A model for the thermal and chemorheological behavior of thermoset processing:(ii) unsaturated polyester based composites, Composites Science and Technology, vol.38, issue.4, pp.339-358, 1990. ,
Modeling the impact of capillary pressure and air entrapment on fiber tow saturation during resin infusion in lcm, Composites Part A: Applied Science and Manufacturing, vol.40, issue.8, pp.1053-1064, 2009. ,
Experimental characterization by fluorescence of capillary flows in dual-scale engineering fabrics, Textile Research Journal, vol.83, issue.15, pp.1634-1659, 2013. ,
Experimental investigation of resin temperature and pressure during filling and curring in a flat steel rtm mould, Composites Part A: Applied Science and Manufacturing, vol.27, issue.5, pp.347-356, 1996. ,
Porosity reduction using optimized flow velocity in resin transfer molding, Composites Part A: Applied Science and Manufacturing, vol.39, issue.12, pp.1859-1868, 2008. ,
Mold filling and cure modeling of rtm and srim processes, Composite Structures, vol.27, issue.1-2, pp.109-120, 1994. ,
The sink term to different kinds of fibrous mat during the unsaturated filling process, Applied Composite Materials, vol.23, issue.3, pp.239-253, 2016. ,
Modélisation du couplage hydromécanique lors de la mise en oeuvre des composites par infusion, 2016. ,
Composites part A: applied science and manufacturing, vol.31, pp.1345-1353, 2000. ,
Simple models and optimization of compression resin transfer molding process, Journal of Reinforced Plastics and Composites, vol.30, issue.19, pp.1629-1648, 2011. ,
URL : https://hal.archives-ouvertes.fr/hal-01942598
Modeling of chemorheology of thermoset cure by modified wlf equation, Journal of applied polymer science, vol.37, issue.4, pp.889-900, 1989. ,
Permeability network model for non-crimp fabrics, Vilnis Frishfelds, and Andris Jakovics, vol.37, pp.826-835, 2006. ,
Dynamic saturation curve measurement for resin flow in glass fibre reinforcement, Composites Part A: Applied Science and Manufacturing, vol.43, issue.3, pp.333-343, 2012. ,
Permeability characterization. part 1: A proposed standard reference fabric for permeability, Polymer Composites, vol.16, issue.6, pp.429-445, 1995. ,
A simple model for the variation of permeability due to partial saturation in dual scale porous media. Transport in porous media, vol.27, pp.243-264, 1997. ,
Micro scale flow behavior and void formation mechanism during impregnation through a unidirectional stitched fiberglass mat, Polymer Engineering & Science, vol.35, issue.10, pp.837-851, 1995. ,
Kinetics of epoxy resin polymerization using differential scanning calorimetry, Journal of Applied Polymer Science, vol.21, issue.9, pp.2359-2373, 1977. ,
A model for unsaturated flow in woven fiber preforms during mold filling in resin transfer molding, Journal of Composite Materials, vol.32, issue.19, pp.1753-1783, 1998. ,
Numerical simulation of unsaturated flow in woven fiber preforms during the resin transfer molding process, Polymer Composites, vol.19, issue.1, pp.71-80, 1998. ,
A numerical study of nonisothermal reactive flow in a dual-scale porous medium under partial saturation, Numerical Heat Transfer, vol.47, issue.2, pp.109-136, 2004. ,
Heats of reaction and kinetics of a thermoset polyester, Journal of Applied Polymer Science, vol.24, issue.4, pp.937-946, 1979. ,
A generalized model for the transverse fluid permeability in unidirectional fibrous media, Polymer Composites, vol.17, issue.2, pp.222-230, 1996. ,
Experimental investigations of the unsaturated flow in liquid composite molding, Proceedings of the 5th Canadian international composites conference, 2005. ,
Optimization of injection flow rate to minimize micro/macro-voids formation in resin transfer molded composites, Composites science and technology, vol.66, issue.3, pp.475-486, 2006. ,
Towards an efficient numerical treatment of the transport problems in the resin transfer molding simulation, Computer Methods in applied mechanics and engineering, vol.196, issue.21, pp.2300-2312, 2007. ,
Numerical prediction and experimental characterisation of meso-scale-voids in liquid composite moulding, Composites Part A: applied science and manufacturing, vol.38, issue.12, pp.2460-2470, 2007. ,
URL : https://hal.archives-ouvertes.fr/hal-01773124
Micro-computed tomography determination of glass fibre reinforced polymer meso-structure, Composites Science and Technology, vol.66, issue.13, pp.2016-2022, 2006. ,
Permeability measurement methods in porous media: A review, International Mechanical Engineering Congress and Exposition, pp.179-200, 2008. ,
Effect of fiber architecture on permeability in liquid composite molding, Polymer Composites, vol.19, issue.5, pp.626-639, 1998. ,
A numerical model to predict fiber tow saturation during liquid composite molding, Composites Science and Technology, vol.63, issue.12, pp.1725-1736, 2003. ,
Desirable features in mold filling simulations for liquid composite molding processes, Polymer Composites, vol.25, issue.4, pp.355-367, 2004. ,
A phenomenological model for fiber tow saturation of dual scale fabrics in liquid composite molding, Polymer Composites, vol.31, issue.11, pp.1881-1889, 2010. ,
Investigation of unsaturated flow in woven, braided and stitched fiber mats during mold-filling in resin transfer molding, Polymer Composites, vol.22, issue.4, pp.491-505, 2001. ,
Application of the level set method to the simulation of resin transfer molding, Composites Science and Technology, vol.66, issue.7, pp.1067-1080, 2006. ,
Fast liquid composite molding simulation of unsaturated flow in dual-scale fiber mats using the imbibition characteristics of a fabric-based unit cell, Polymer Composites, vol.31, issue.10, pp.1790-1807, 2010. ,
Numerical simulation of reactive flow in liquid composite molding using flux-corrected transport (fct) based finite element/control volume (fe/cv) method, International Journal of Heat and Mass Transfer, vol.53, issue.9, pp.2256-2271, 2010. ,
Multiscale modeling of unsaturated flow in dual-scale fiber preforms of liquid composite molding i: isothermal flows, Composites Part A: Applied Science and Manufacturing, vol.43, issue.1, pp.1-13, 2012. ,
Multiscale modeling of unsaturated flow in dual-scale fiber preforms of liquid composite molding iii: reactive flows, Composites Part A: Applied Science and Manufacturing, vol.43, issue.1, pp.29-44, 2012. ,
Variations in unsaturated flow with flow direction in resin transfer molding: An experimental investigation, Composites Part A: Applied science and manufacturing, vol.38, issue.8, pp.1872-1892, 2007. ,
Numerical analysis of the resin transfer molding process by the finite element method, Advances in Polymer Technology, vol.12, issue.4, pp.329-342, 1993. ,
Governing equations for flow and heat transfer in stationary fiber beds, Composite Materials Series, pp.257-257, 1994. ,
A study on the mold filling process in resin transfer molding, Polymer Engineering & Science, vol.31, issue.11, pp.765-771, 1991. ,
The effect of fabric and fiber tow shear on dual scale flow and fiber bundle saturation during liquid molding of textile composites, International journal of material forming, vol.5, issue.1, pp.83-97, 2012. ,
Modelling microscopic flow in woven fabric reinforcements and its application in dual-scale resin infusion modelling, Composites Part A: Applied Science and Manufacturing, vol.39, issue.5, pp.843-855, 2008. ,
Radial flow permeability measurement. part a: Theory, Composites Part A: Applied Science and Manufacturing, vol.30, issue.6, pp.781-796, 1999. ,
The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids, J. Am. Chem. Soc, vol.77, issue.14, pp.3701-3707, 1955. ,
Experimental measurements of sink terms for unsaturated flow during liquid composite molding, Journal of Residuals Science & Technology, vol.13, issue.6, 2016. ,
Viscosity properties of sodium carboxymethylcellulose solutions, Cellulose, vol.14, issue.5, pp.409-417, 2007. ,
Numerical simulation of the resin transfer mold filling process using the boundary element method, Polymer Composites, vol.17, issue.3, pp.368-374, 1996. ,