Z. Aboura, G. Hello, H. Kebir, M. A. Tiar, and M. L. Benzeggagh, « Finite element modeling of mechanical behavior of 3D composite materials, Proceedings of ECCM-15 conference, 2012.

. Acare and . Acare, Flightpath 2050 -Europe's Vision for Aviation, 2011.

S. Adanur and T. Liao, « 3D modeling of textile composite preforms, Composites Part B : Engineering, vol.29, pp.787-793, 1998.

F. Aguet, M. Jacob, and M. Unser, « Three-dimensional feature detection using optimal steerable filters, Image Processing, 2005. ICIP 2005. IEEE International Conference on. T. 2. IEEE, p.1158, 2005.

P. Alliez, D. Cohen-steiner, M. Yvinec, and M. Desbrun, « Variational tetrahedral meshing, ACM SIGGRAPH 2005 Courses, p.10, 2005.

C. Alliez, P. Jamin, L. Rineau, S. Tayeb, J. Tournois et al., « 3D Mesh Generation, CGAL User and, 2018.

P. Arbenz and C. Flaig, « On smoothing surfaces in voxel based finite element analysis of trabecular bone, International Conference on Large-Scale Scientific Computing, pp.69-77, 2007.

I. Arganda-carreras, C. O. Sorzano, R. Marabini, J. Carazo, C. Ortiz-desolorzano et al., « Consistent and elastic registration of histological sections using vector-spline regularization, International Workshop on Computer Vision Approaches to Medical Image Analysis, pp.85-95, 2006.

F. Auguin, ´ Etude de conception d'une mini-machine de tractionàtractionà chaud, Rapp. tech. Laboratoire des Composites Thermo-Structuraux, vol.33600, 2013.

H. Azadi and A. R. Khoei, « Numerical simulation of multiple crack growth in brittle materials with adaptive remeshing, International journal for numerical methods in engineering, vol.85, pp.1017-1048, 2011.

H. Bale, M. Blacklock, M. R. Begley, D. B. Marshall, B. N. Cox et al., « Characterizing Three-Dimensional Textile Ceramic Composites Using Synchrotron XRay Micro-Computed-Tomography, Journal of the American Ceramic Society, vol.95, issue.1, pp.392-402, 2012.

H. A. Bale, A. Haboub, A. A. Macdowell, J. R. Nasiatka, D. Y. Parkinson et al., « Real-time quantitative imaging of failure events in materials under load at temperatures above 1,600 C, Nature materials, vol.12, p.40, 2013.

M. K. Ballard and J. D. Whitcomb, « Prediction of progressive damage at the fiber/matrix scale using cohesive zone elements, 56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, p.391, 2015.

G. I. Barenblatt, « The mathematical theory of equilibrium cracks in brittle fracture, Advances in applied mechanics. T. 7, pp.55-129, 1962.

Z. P. Ba?ant and S. Pang, « Activation energy based extreme value statistics and size e?ect in brittle and quasibrittle fracture, Journal of the Mechanics and Physics of Solids, vol.55, pp.91-131, 2007.

Z. P. Ba?ant and B. H. Oh, « Crack band theory for fracture of concrete, Matériaux et construction, vol.16, issue.3, pp.155-177, 1983.

E. Bedogni, D. Ivanov, S. V. Lomov, A. Pirondi, and M. , Vettori et I. Verpoest. « Creating finite element models of 3D woven fabrics and composites : Semi-automated solution of interpenetration problem, 15th European Conference on Composite Materials (ECCM-15), 2012.

T. Belytschko and J. Song, « Coarse-graining of multiscale crack propagation, International journal for numerical methods in engineering, vol.81, pp.537-563, 2010.

J. Benezech, « ModélisationModélisation`Modélisationà l'´ echelle mésoscopique du comportement thermomécanique de zonessingulì eres depì eces aéronautiques en CMC, 2019.

R. Böhm, J. Stiller, T. Behnisch, M. Zscheyge, R. Protz et al., « A quantitative comparison of the capabilities of in situ computed tomography and conventional computed tomography for damage analysis of composites, Composites Science and Technology, vol.110, pp.62-68, 2015.

D. Boltcheva, M. Yvinec, and J. Boissonnat, « Mesh generation from 3d multimaterial images, International Conference on Medical Image Computing and ComputerAssisted Intervention, pp.283-290, 2009.

H. Borouchaki and P. Laug, « Le mailleur adaptatif bidimensionnel BL2D : manuel d'utilisation et documentation, INRIA, 1995.

E. Bosco, V. G. Kouznetsova, E. W. Coenen, M. G. Geers, and A. Salvadori, « A multiscale framework for localizing microstructures towards the onset of macroscopic discontinuity, Computational Mechanics, vol.54, pp.299-319, 2014.

P. Bouchard, F. Bay, and Y. Chastel, « Numerical modelling of crack propagation : automatic remeshing and comparison of di?erent criteria, Computer methods in applied mechanics and engineering, vol.192, pp.3887-3908, 2003.

A. Bouterf, « Comportement mécanique de la plaque de plâtré etudié par tomographie et essais mécaniques in-situ, 2014.

S. K. Boyd and R. Müller, « Smooth surface meshing for automated finite element model generation from 3D image data, Journal of Biomechanics, vol.39, issue.7, pp.1287-1295, 2006.
DOI : 10.1016/j.jbiomech.2005.03.006

M. Braginsky and C. P. Przybyla, « Simulation of crack propagation/deflection in ceramic matrix continuous fiber reinforced composites with weak interphase via the extended finite element method, Composite Structures, vol.136, pp.538-545, 2016.

J. J. Brennan, « Interfacial characterization of glass and glass-ceramic matrix/Nicalon SiC fiber composites, Tailoring multiphase and composite ceramics, pp.549-560, 1986.

B. Budiansky, J. W. Hutchinson, and A. G. Evans, « Matrix fracture in fiber-reinforced ceramics, Journal of the Mechanics and Physics of Solids, vol.34, pp.167-189, 1986.
DOI : 10.1016/0022-5096(86)90035-9

A. Buljac, T. Taillandier-thomas, T. F. Morgeneyer, L. Helfen, and S. Roux,

. Hild, Slant strained band development during flat to slant crack transition in AA 2198 T8 sheet : in situ 3D measurements, International Journal of Fracture, pp.49-62, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01385406

A. Buljac, M. Shakoor, J. Neggers, M. Bernacki, P. Bouchard et al., « Numerical validation framework for micromechanical simulations based on synchrotron 3D imaging, Computational Mechanics, vol.59, pp.419-441, 2017.
DOI : 10.1007/s00466-016-1357-0
URL : https://hal.archives-ouvertes.fr/hal-01480980/file/CM2017-ccsd.pdf

A. R. Bunsell and A. Piant, « A review of the development of three generations of small diameter silicon carbide fibres, Journal of Materials Science, vol.41, issue.3, pp.823-839, 2006.

P. P. Camanho, A. Arteiro, A. R. Melro, G. Catalanotti, and M. Vogler, « Threedimensional invariant-based failure criteria for fibre-reinforced composites, International Journal of Solids and Structures, vol.55, pp.92-107, 2015.
DOI : 10.1016/j.ijsolstr.2014.03.038
URL : https://doi.org/10.1016/j.ijsolstr.2014.03.038

G. Camus, C. Lorrerre, R. Pailler, F. Rebillat, B. Reigner et al., « Matériaux compositesàcompositesà matrice céramique etàetà renfort par fibres longues, Techniques de l'ingénieur, 2016.

N. Carrère, « Sur l'analyse multiechelle des materiaux composites a matrice metallique : application au calcul de structure », 2001.

O. Caty, P. Ibarroule, M. Herbreteau, F. Rebillat, E. Maire et al., « Application of X-ray computed micro-tomography to the study of damage and oxidation kinetics of thermostructural composites, Nuclear Instruments and Methods in Physics Research Section B : Beam Interactions with Materials and Atoms, vol.324, pp.113-117, 2014.

M. Cervera, L. Peì-a, R. Clemente, and P. Roca, « A crack-tracking technique for localized damage in quasi-brittle materials, Engineering Fracture Mechanics, vol.77, pp.2431-2450, 2010.
DOI : 10.1016/j.engfracmech.2010.06.013

N. Chandra, H. Li, C. Shet, and H. Ghonem, « Some issues in the application of cohesive zone models for metal-ceramic interfaces, International Journal of Solids and Structures, vol.39, pp.2827-2855, 2002.

C. Chateau, Analyse expérimentale et modélisation micromécaniques du comportementélastique comportementélastique et de l'endommagement de composites SiC/SiC unidirectionnels, Ecole Polytechnique X, 2011.

C. Chateau, L. Gélébart, M. Bornert, J. Crépin, E. Boller et al., « In situ X-ray microtomography characterization of damage in SiCf/SiC minicomposites, Composites Science and Technology, vol.71, pp.916-924, 2011.

C. Chapoullié, J. Costa, M. Cataldi, G. Vignoles, and C. Germain, « Orientationguided two-scale approach for the segmentation and quantitative description of woven bundles of fibers from three-dimensional tomographic images, Journal of Electronic Imaging, vol.24, p.61113, 2015.

M. Charron, Modélisation basée images du comportement thermomécanique de composite C/C, 2017.

Y. Chen, « Damage mechanisms of SiC/SiC composite tubes : three-dimensional analysis coupling tomography imaging and numerical simulation, 2017.

V. Chiaruttini, V. Riolo, and F. Feyel, Advanced remeshing techniques for complex 3D crack propagation, p.13, 2013.

G. Chollon, « Fibres céramiquescéramiquesà base de carbure de silicium etàetà faible taux d'oxyg` ene/par Georges Chollon, 1995.

G. S. Corman and K. L. Luthra, « Silicon melt infiltrated ceramic composites (HiPerComp TM ) ». In : Handbook of ceramic composites, pp.99-115, 2005.

A. Coradi, « Modélisation du comportement mécanique des compositesàcompositesà matrice céra-mique : développement du réseau de fissures, 2014.

G. Couégnat, « Approche multiéchelle du comportement mécanique de matériaux compositesàpositesà renfort tissé, 2008.

G. Couégnat, H. Ayadi, C. Saurat, and E. Rohmer, « Towards realistic geometric modeling of woven fabrics, 19th International Conference on Composite Materials (ICCM19), 2013.

B. N. Cox, H. A. Bale, M. Begley, M. Blacklock, B. Do et al., Stochastic virtual tests for high-temperature ceramic matrix composites, Annual Review of Materials Research, vol.44, pp.479-529, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01808033

J. J. Crookston, W. Ruijter, A. C. Long, and N. A. , Warrior et I.A. Jones. « A comparison of mechanical property prediction techniques using conformal tetrahedra and voxel-based finite element meshes for textile composite unit cells, Finite element modelling of textiles and textile composites, 2007.

S. Daggumati, I. De-baere, W. Van-paepegem, J. Degrieck, J. Xu et al., « Local damage in a 5-harness satin weave composite under static tension : Part I-Experimental analysis, Composites Science and Technology, vol.70, pp.1926-1933, 2010.

S. Daggumati, W. Van-paepegem, J. Degrieck, J. Xu, and S. V. , Lomov et I. Verpoest. « Local damage in a 5-harness satin weave composite under static tension : Part II-Meso-FE modelling, Composites Science and Technology, vol.70, pp.1934-1941, 2010.

N. V. De-carvalho, S. T. Pinho, and P. Robinson, « An experimental study of failure initiation and propagation in 2D woven composites under compression, Composites Science and Technology, vol.71, pp.1316-1325, 2011.

N. V. De-carvalho, S. T. Pinho, and P. Robinson, « Reducing the domain in the mechanical analysis of periodic structures, with application to woven composites, Composites Science and Technology, vol.71, pp.969-979, 2011.

N. V. De-carvalho, S. T. Pinho, and P. Robinson, « Numerical modelling of woven composites : Biaxial loading, Composites Part A : Applied Science and Manufacturing, vol.43, pp.1326-1337, 2012.

F. Desplentere, S. V. Lomov, D. L. Woerdeman, I. Verpoest, M. Wevers et al., « Micro-CT characterization of variability in 3D textile architecture, Composites Science and Technology, vol.65, pp.1920-1930, 2005.

S. Dietrich, J. Gebert, G. Stasiuk, A. Wanner, K. A. Weidenmann et al., « Microstructure characterization of CVI-densified carbon/carbon composites with various fiber distributions, Composites Science and Technology, vol.72, pp.1892-1900, 2012.

A. Doitrand, C. Fagiano, V. Chiaruttini, F. H. Leroy, A. Mavel et al., « Experimental characterization and numerical modeling of damage at the mesoscopic scale of woven polymer matrix composites under quasi-static tensile loading, Composites Science and Technology, vol.119, pp.1-11, 2015.

A. Doitrand, C. Fagiano, F. Irisarri, and M. Hirsekorn, « Comparison between voxel and consistent meso-scale models of woven composites, Composites Part A : Applied Science and Manufacturing, vol.73, pp.143-154, 2015.

A. Doitrand, « EndommagementàEndommagementà l'´ echelle mésoscopique et son influence sur la tenue mécanique des matériaux composites tissés, 2016.

A. Doitrand, C. Fagiano, N. Carrere, V. Chiaruttini, and M. Hirsekorn, « Damage onset modeling in woven composites based on a coupled stress and energy criterion, Engineering Fracture Mechanics, vol.169, pp.189-200, 2017.

A. Drach, B. Drach, and I. Tsukrov, « Processing of fiber architecture data for finite element modeling of 3D woven composites, Advances in Engineering Software, vol.72, pp.18-27, 2014.

D. S. Dugdale, « Yielding of steel sheets containing slits, Journal of the Mechanics and Physics of Solids, vol.8, pp.100-104, 1960.

D. Durville, « Finite element simulation of textile materials at mesoscopic scale ». In : Finite element modelling of textiles ans textile composites, 2007.

D. Durville, « Simulation of the mechanical behaviour of woven fabrics at the scale of fibers, International journal of material forming, vol.3, issue.2, pp.1241-1251, 2010.

S. Essongue-boussougou, « Méthode desélémetsdesélémets finis augmentés pour la rupture quasifragile : application aux composites tisséstissésà matrice céramique, 2017.

A. G. Evans and F. W. Zok, « The physics and mechanics of fibre-reinforced brittle matrix composites, Journal of Materials science, vol.29, pp.3857-3896, 1994.

J. C. Faes, A. Rezaei, W. Van-paepegem, and J. Degrieck, « Accuracy of 2D FE models for prediction of crack initiation in nested textile composites with inhomogeneous intra-yarn fiber volume fractions, Composite Structures, vol.140, pp.11-20, 2016.

C. Fagiano, M. Genet, E. Baranger, and P. Ladevèze, « Computational geometrical and mechanical modeling of woven ceramic composites at the mesoscale, Composite Structures, vol.112, pp.146-156, 2014.

Q. Fang and D. A. Boas, « Tetrahedral mesh generation from volumetric binary and grayscale images, Biomedical Imaging : From Nano to Macro, 2009. ISBI'09, pp.1142-1145, 2009.

G. Fang, B. E. Said, D. Ivanov, and S. R. Hallett, « Smoothing artificial stress concentrations in voxel-based models of textile composites, Composites Part A : Applied Science and Manufacturing, vol.80, pp.270-284, 2016.

J. Feder, « Random sequential adsorption, Journal of Theoretical Biology, vol.87, pp.237-254, 1980.

L. A. Feldkamp, L. C. Davis, and J. W. Kress, « Practical cone-beam algorithm, Josa a, vol.1, pp.612-619, 1984.

F. Feyel and J. Chaboche, « FE2 multiscale approach for modelling the elastoviscoplastic behaviour of long fibre SiC/Ti composite materials, Computer methods in applied mechanics and engineering, vol.183, pp.309-330, 2000.

F. Feyel, « A multilevel finite element method (FE2) to describe the response of highly non-linear structures using generalized continua, Computer Methods in applied Mechanics and engineering, vol.192, pp.3233-3244, 2003.

G. A. Francfort and J. Marigo, « Revisiting brittle fracture as an energy minimization problem, Journal of the Mechanics and Physics of Solids, vol.46, pp.1319-1342, 1998.

A. F. Frangi, W. J. Niessen, K. L. Vincken, and M. A. Viergever, « Multiscale vessel enhancement filtering, International Conference on Medical Image Computing and Computer-Assisted Intervention, pp.130-137, 1998.

G. Gardiner, « Aeroengine composites, Part 1 : the CMC invasion, Composites World, p.31, 2015.

I. G. García, B. J. Carter, and A. R. , Ingraffea et V. Manti?. « A numerical study of transverse cracking in cross-ply laminates by 3D finite fracture mechanics, Composites Part B : Engineering, vol.95, pp.475-487, 2016.

M. Garland and P. S. Heckbert, « Surface simplification using quadric error metrics, Proceedings of the 24th annual conference on Computer graphics and interactive techniques, pp.209-216, 1997.

W. Gauthier, F. Pailler, J. Lamon, and R. Pailler, « Oxidation of silicon carbide fibers during static fatigue in air at intermediate temperatures, Journal of the American Ceramic Society, vol.92, pp.2067-2073, 2009.

M. G. Geers, V. G. Kouznetsova, and W. A. Brekelmans, « Multi-scale computational homogenization : Trends and challenges, Journal of computational and applied mathematics, vol.234, pp.2175-2182, 2010.

P. L. George, « Tetmesh-GHS3D, Tetrahedral mesh generator, vol.83, 2004.

N. Godin, S. Huguet, R. Gaertner, and L. Salmon, « Clustering of acoustic emission signals collected during tensile tests on unidirectional glass/polyester composite using supervised and unsupervised classifiers, Ndt & E International, vol.37, pp.253-264, 2004.

J. Goldmann, J. Brummund, and V. Ulbricht, On boundary conditions for homogenization of volume elements undergoing localization, International Journal for Numerical Methods in Engineering, 2018.

L. Gorbatikh, D. Ivanov, S. Lomov, and I. Verpoest, « On modelling of damage evolution in textile composites on meso-level via property degradation approach, Composites Part A : applied science and manufacturing, vol.38, pp.2433-2442, 2007.

M. Gosset, Développement de mini-machines de tractionàtractionà chaud in-situ pour l'´ etude de composites thermostructuraux pour la sortie de tuyère de réacteur, Rapp. tech. Laboratoire des Composites Thermo-Structuraux, vol.33600, 2014.

Y. Gowayed, G. Ojard, R. Miller, U. Santhosh, J. Ahmad et al., Mechanical Properties of MI SiC/SiC Composites and Their Constituents (Preprint), Rapp. tech. AUBURN UNIV AL, 2007.

Y. Gowayed, G. Ojard, R. Miller, U. Santhosh, J. Ahmad et al., « Correlation of elastic properties of melt infiltrated SiC/SiC composites to in situ properties of constituent phases, Composites Science and Technology, vol.70, pp.435-441, 2010.

G. , « Approche multimodèle pour la conception de structures compositesàcompositesà renfort tissé, 2013.

S. D. Green, A. C. Long, B. S. Said, and S. R. Hallett, « Numerical modelling of 3D woven preform deformations, Composite Structures, vol.108, pp.747-756, 2014.

S. D. Green, M. Y. Matveev, A. C. Long, D. Ivanov, and S. R. Hallett, « Mechanical modelling of 3D woven composites considering realistic unit cell geometry, Composite Structures, vol.118, pp.284-293, 2014.

E. Grippon, « Endommagement et microfissuration d'un compositè a matrice céramique tissé 3D : approchemulti-´ echelle etévaluationetévaluation ultrasonore, 2013.

N. Guel, « Comportement mécanique de composites oxydes : relations procédé-microstructurepropriétés, 2018.

L. Guillaumat and J. Lamon, « Multi-fissuration de composites SiC/SiC, Revue des composites et des materiaux avances, vol.3, pp.159-171, 1993.

V. Herb, ´. E. Martin, and G. Couégnat, « Mécanismes d'endommagement de di?érents compositesàcompositesà matrice céramique lors d'un impactàimpactà basse vitesse, 17èmes Journées Nationales sur les Composites (JNC17), p.43, 2011.

M. Herráez, D. Mora, F. Naya, C. S. Lopes, C. González et al., « Transverse cracking of cross-ply laminates : A computational micromechanics perspective, Composites Science and Technology, vol.110, pp.196-204, 2015.

M. Herráez, C. González, C. S. Lopes, R. G. De-villoria, J. Llorca et al., « Computational micromechanics evaluation of the e?ect of fibre shape on the transverse strength of unidirectional composites : an approach to virtual materials design, Composites Part A : Applied Science and Manufacturing, vol.91, pp.484-492, 2016.

F. Hild and S. Roux, « CorreliQ4 : A software for finite element displacement field measurements by digital image correlation, Rapport interne LMT Cachan, vol.269, 2008.

A. Hillerborg, M. Modéer, and P. Petersson, « Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements, Cement and concrete research, vol.6, pp.773-781, 1976.

G. Hivet and P. Boisse, Application to a meshing preprocessor for 3D finite element analysis, Finite Elements in Analysis and Design, vol.42, pp.25-49, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00020539

O. Hoffman, The brittle strength of orthotropic materials, vol.1, pp.200-206, 1967.

L. Huang, Y. Wang, Y. Miao, D. Swenson, Y. Ma et al., « Dynamic relaxation approach with periodic boundary conditions in determining the 3-D woven textile microgeometry, Composite Structures, vol.106, pp.417-425, 2013.

. Iata and . Iata, Forecasts Passenger Demand to Double Over 20 Years, 2016.

N. Jacobson, S. Farmer, A. Moore, and H. Sayir, « High-Temperature Oxidation of Boron Nitride : I, Monolithic Boron Nitride, Journal of the American Ceramic Society, vol.82, pp.393-398, 1999.

H. Jin and R. I. Tanner, « Generation of unstructured tetrahedral meshes by advancing front technique, International Journal for Numerical Methods in Engineering, vol.36, pp.1805-1823, 1993.

J. Jung, B. Do, and Q. D. Yang, « Augmented finite-element method for arbitrary cracking and crack interaction in solids under thermo-mechanical loadings, Phil. Trans. R. Soc. A, vol.374, p.20150282, 2016.

L. M. Kachanov, « Time of the rupture process under creep conditions, Nank SSR Otd Tech Nauk, vol.8, pp.26-31, 1958.

T. Kanit, S. Forest, I. Galliet, V. Mounoury, and D. Jeulin, « Determination of the size of the representative volume element for random composites : statistical and numerical approach, International Journal of solids and structures, vol.40, pp.3647-3679, 2003.

S. Kari, M. Kumar, I. A. Jones, and N. A. , Warrior et A.C. Long. « E?ect of yarn crosssectional shapes and crimp on the mechanical properties of 3D woven composites, Proceedings of the 17th IFAC World Congress, pp.1-10, 2008.

H. J. Kim and C. C. Swan, « Voxel-based meshing and unit-cell analysis of textile composites, International Journal for Numerical Methods in Engineering, vol.56, pp.977-1006, 2003.

A. King, N. Guignot, P. Zerbino, E. Boulard, K. Desjardins et al., Tomography and imaging at the PSICHE beam line of the SOLEIL synchrotron, Review of Scientific Instruments, vol.87, p.93704, 2016.

F. Klocke, A. Klink, D. Veselovac, D. K. Aspinwall, S. L. Soo et al., « Turbomachinery component manufacture by application of electrochemical, electro-physical and photonic processes, CIRP Annals, vol.63, pp.703-726, 2014.

C. G. Koay, « On the six-dimensional orthogonal tensor representation of the rotation in three dimensions : A simplified approach, Mechanics of Materials, vol.41, pp.951-953, 2009.

A. S. Koumpias, K. I. Tserpes, and S. Pantelakis, « Progressive damage modelling of 3D fully interlaced woven composite materials, Fatigue & Fracture of Engineering Materials & Structures, vol.37, pp.696-706, 2014.

J. Lamon, « Chemical vapor infiltrated SiC/SiC composites (CVI SIC/SIC) ». In : Handbook of ceramic composites, pp.55-76, 2005.

F. Laurin, N. Tableau, M. Kaminski, Z. Aboura, and F. Bouillon, « Validation of the onera damage model through comparisons with multi-instrumented structural tests on interlock woven ceramic matrix composites, 16th European Conference on Composite Materials, 2014.

B. H. Le-page, F. J. Guild, S. L. Ogin, and P. A. Smith, « Finite element simulation of woven fabric composites, Composites Part A : Applied Science and Manufacturing, vol.35, pp.861-872, 2004.

D. Leguillon, « Strength or toughness ? A criterion for crack onset at a notch, European Journal of Mechanics-A/Solids, vol.21, pp.61-72, 2002.

B. Legin, « Caractérisation de l'endommagement des matériaux CompositesàCompositesà Matrice Céramique tissés 3D sous diverses sollicitations mécaniques, Journées Nationales sur les Composites, 2017.

J. Lemaitre and J. Chaboche, « Aspect phénoménologique de la rupture par endommagement, J Méc Appl, vol.2, issue.3, 1978.

Z. A. Lethbridge, R. I. Walton, A. S. Marmier, C. W. Smith, and K. E. Evans, « Elastic anisotropy and extreme Poisson's ratios in single crystals, Acta Materialia, vol.58, pp.6444-6451, 2010.

J. Li, E. Martin, D. Leguillon, and C. Dupin, « A finite fracture model for the analysis of multi-cracking in woven ceramic matrix composites, Composites Part B : Engineering, vol.139, pp.75-83, 2018.

Y. Liu, I. Straumit, D. Vasiukov, S. V. Lomov, and S. Panier, « Prediction of linear and non-linear behavior of 3D woven composite using mesoscopic voxel models reconstructed from X-ray micro-tomography, Composite Structures, vol.179, pp.568-579, 2017.

S. V. Lomov and I. Verpoest, « WiseTex-virtual textile reinforcement software, Proc. 48th SAMPE-USA Symposium, pp.1320-1334, 2003.

S. V. Lomov, D. S. Ivanov, I. Verpoest, M. Zako, T. Kurashiki et al., Meso-FE modelling of textile composites : Road map, data flow and algorithms, vol.67, pp.1870-1891, 2007.

S. V. Lomov, D. S. Ivanov, T. C. Truong, I. Verpoest, F. Baudry et al., « Experimental methodology of study of damage initiation and development in textile composites in uniaxial tensile test, Composites Science and Technology, vol.68, pp.2340-2349, 2008.

S. V. Lomov and I. Verpoest, « Textile composite materials : polymer matrix composites, Encyclopedia of Aerospace Engineering, 2010.

W. E. Lorensen and H. E. Cline, « Marching cubes : A high resolution 3D surface construction algorithm, ACM siggraph computer graphics. T. 21. 4. ACM, pp.163-169, 1987.

Y. Mahadik and S. R. Hallett, « Finite element modelling of tow geometry in 3D woven fabrics, Composites Part A : Applied Science and Manufacturing, vol.41, pp.1192-1200, 2010.

E. Maire and P. J. Withers, « Quantitative X-ray tomography, International materials reviews, vol.59, pp.1-43, 2014.

J. F. Maire and J. L. Chaboche, « A new formulation of continuum damage mechanics (CDM) for composite materials, Aerospace Science and Technology, vol.1, pp.247-257, 1997.

X. Martin, « Oxydation/corrosion de matériaux composites (SiCf/SiBCm) ` a matrice auto-cicatrisante, 2003.

E. Martin, B. Poitou, D. Leguillon, and J. Gatt, « Competition between deflection and penetration at an interface in the vicinity of a main crack, International Journal of Fracture, vol.151, pp.247-268, 2008.

L. Marcin, « Modélisation du comportement, de l'endommagement et de la rupture de matériaux compositesàcompositesà renforts tissés pour le dimensionnement robuste de structures, 2010.

E. Martin, D. Leguillon, and N. Carrère, « A twofold strength and toughness criterion for the onset of free-edge shear delamination in angle-ply laminates, International journal of Solids and Structures, vol.47, pp.1297-1305, 2010.

D. Marshall, B. Cox, P. Kroll, G. Hilmas, W. Fahrenholtz et al., National Hypersonic Science Center for Materials and Structures. Rapp. tech. TELEDYNE SCIENTIFIC COMPANY THOUSAND OAKS CA, 2014.

D. B. Marshall, B. N. Cox, and A. G. Evans, « The mechanics of matrix cracking in brittlematrix fiber composites, Acta metallurgica, vol.33, pp.2013-2021, 1985.

V. Mazars, O. Caty, A. Couégnat, S. Bouterf, S. Roux et al., Vignoles. « Damage investigation and modeling of 3D woven ceramic matrix composites from X-ray tomography in-situ tensile tests, Acta Materialia, vol.140, pp.130-139, 2017.

A. R. Melro, P. P. Camanho, F. M. Andrade-pires, and S. T. Pinho, « Numerical simulation of the non-linear deformation of 5-harness satin weaves, Computational Materials Science, vol.61, pp.116-126, 2012.

J. M. Melenk and I. Babu?ka, « The partition of unity finite element method : basic theory and applications, Computer methods in applied mechanics and engineering, vol.139, pp.289-314, 1996.

Y. Miao, E. Zhou, Y. Wang, and B. A. Cheeseman, « Mechanics of textile composites : Micro-geometry, Composites Science and Technology, vol.68, pp.1671-1678, 2008.

C. Miehe, F. Welschinger, and M. Hofacker, « Thermodynamically consistent phasefield models of fracture : Variational principles and multi-field FE implementations, International Journal for Numerical Methods in Engineering, vol.83, pp.1273-1311, 2010.

S. K. Mital, B. A. Bednarcyk, S. M. Arnold, and J. Lang, « Modeling of melt-infiltrated SiC/SiC composite properties, 2009.

G. Molnár and A. Gravouil, « 2D and 3D Abaqus implementation of a robust staggered phase-field solution for modeling brittle fracture, Finite Elements in Analysis and Design, vol.130, pp.27-38, 2017.

G. N. Morscher, J. Hurst, and D. Brewer, « Intermediate-Temperature Stress Rupture of a Woven Hi-Nicalon, BN-Interphase, SiC-Matrix Composite in Air, Journal of the American Ceramic Society, vol.83, pp.1441-1449, 2000.

G. N. Morscher, « Comparison of Matrix Cracking in Melt-Infiltrated SiC/SiC Composites with 3D and 2D-Woven Orthogonal Architectures, 2003.

G. N. Morscher, « Matrix cracking in four di?erent 2D SiC/SiC composite systems, 2003.

G. N. Morscher, « Stress-dependent matrix cracking in 2D woven SiC-fiber reinforced melt-infiltrated SiC matrix composites, Composites Science and Technology, vol.64, pp.1311-1319, 2004.

G. N. Morscher, M. Singh, J. D. Kiser, M. Freedman, and R. Bhatt, « Modeling stressdependent matrix cracking and stress-strain behavior in 2D woven SiC fiber reinforced CVI SiC composites, Composites Science and Technology, vol.67, pp.1009-1017, 2007.

G. N. Morscher and J. Z. Gyekenyesi, « Room temperature tensile behavior and damage accumulation of hi-nicalon reinforced sic matrix composites, 22nd Annual Conference on Composites, Advanced Ceramics, Materials, and Structures-A. T. 218, p.241, 2009.

G. N. Morscher and V. V. Pujar, « Design Guidelines for In-Plane Mechanical Properties of SiC Fiber-Reinforced Melt-Infiltrated SiC Composites, International Journal of Applied Ceramic Technology, vol.6, pp.151-163, 2009.

G. N. Morscher, « Tensile creep and rupture of 2D-woven SiC/SiC composites for high temperature applications, Journal of the European Ceramic Society, vol.30, pp.2209-2221, 2010.

L. S. Mora and T. J. Marrow, « Multiscale Damage Modeling in a Ceramic Matrix Composite using a Finite Element Microstructure MEshfree methodology1, Philosophical Transactions of the Royal Society A-Mathematical, vol.374, p.20150276, 2016.

M. A. Msekh, J. M. Sargado, M. Jamshidian, P. M. Areias, and T. Rabczuk, Abaqus implementation of phase-field model for brittle fracture, vol.96, pp.472-484, 2015.

C. Mulat, M. Donias, P. Baylou, G. Vignoles, and C. Germain, « Axis detection of cylindrical objects in 3-D images, Journal of Electronic Imaging, vol.17, pp.311081-0311089, 2008.

S. Murakami, « Mechanical modeling of material damage, ASME, Transactions, vol.55, pp.280-286, 1988.

N. Naouar, E. Vidal-sallé, J. Schneider, E. Maire, and P. Boisse, « Meso-scale FE analyses of textile composite reinforcement deformation based on X-ray computed tomography, Composite structures, vol.116, pp.165-176, 2014.

N. Naouar, E. Vidal-salle, J. Schneider, E. Maire, and P. Boisse, « 3D composite reinforcement meso FE analyses based on X-ray computed tomography, Composite Structures, vol.132, pp.1094-1104, 2015.

R. Naslain, A. Guette, F. Rebillat, R. Pailler, F. Langlais et al., « Boron-bearing species in ceramic matrix composites for long-term aerospace applications, Journal of Solid State Chemistry, vol.177, pp.449-456, 2004.

R. Naslain, O. Dugne, A. Guette, J. Sevely, C. R. Brosse et al., Rocher et J. Cotteret. « Boron Nitride Interphase in Ceramic-Matrix Composites, vol.74, pp.2482-2488, 1991.

R. Naslain, « Fibre-matrix interphases and interfaces in ceramic matrix composites processed by CVI, Composite Interfaces, vol.1, pp.253-286, 1993.

R. R. Naslain, « The design of the fibre-matrix interfacial zone in ceramic matrix composites, Composites Part A : Applied Science and Manufacturing, vol.29, issue.10, pp.1145-1155, 1998.

F. Naya, C. González, C. S. Lopes, and S. , Van der Veen et F. Pons. « Computational micromechanics of the transverse and shear behavior of unidirectional fiber reinforced polymers including environmental e?ects, Composites Part A : Applied Science and Manufacturing, vol.92, pp.146-157, 2017.

V. P. Nguyen, O. Lloberas-valls, M. Stroeven, and L. J. Sluys, « Homogenizationbased multiscale crack modelling : from micro-di?usive damage to macro-cracks, Computer Methods in Applied Mechanics and Engineering, pp.1220-1236, 2011.

V. P. Nguyen, M. Stroeven, and L. J. Sluys, « An enhanced continuous-discontinuous multiscale method for modeling mode-I cohesive failure in random heterogeneous quasibrittle materials, Engineering Fracture Mechanics, vol.79, pp.78-102, 2012.

Q. T. Nguyen, E. Vidal-sallé, P. Boisse, C. H. Park, A. Saouab et al., « Mesoscopic scale analyses of textile composite reinforcement compaction, Composites Part B : Engineering, vol.44, pp.231-241, 2013.

T. T. Nguyen, « Modeling of complex microcracking in cement based materials by combining numerical simulations based on a phase-field method and experimental 3D imaging, 2015.

T. T. Nguyen, J. Rethore, J. Yvonnet, and M. Baietto, « Multi-phase-field modeling of anisotropic crack propagation for polycrystalline materials, Computational Mechanics, vol.60, issue.2, pp.289-314, 2017.

F. Nualas, « Fonctionnement en oxydation de matériaux composites céramiques (CMC) dans des environnements aéronautiques, 2013.

E. Obert, F. Daghia, P. Ladevèze, and L. Ballere, « Micro and meso modeling of woven composites : Transverse cracking kinetics and homogenization, Composite Structures, vol.117, pp.212-221, 2014.

D. H. Pahr and H. J. Böhm, « Assessment of mixed uniform boundary conditions for predicting the mechanical behavior of elastic and inelastic discontinuously reinforced composites, Comput. Model. Engng. Sci, vol.34, pp.117-136, 2008.

D. H. Pahr and P. K. Zysset, « Influence of boundary conditions on computed apparent elastic properties of cancellous bone, Biomechanics and modeling in mechanobiology, vol.7, issue.6, pp.463-476, 2008.

G. Pijaudier-cabot and Z. P. Ba?ant, « Nonlocal damage theory, Journal of engineering mechanics, vol.113, pp.1512-1533, 1987.

P. Pineau, G. Couégnat, and J. Lamon, « Virtual testing applied to transverse multiple cracking of tows in woven ceramic composites, Mechanics Research Communications, vol.38, pp.579-585, 2011.

E. Potter, S. T. Pinho, P. Robinson, L. Iannucci, and A. J. Mcmillan, « Mesh generation and geometrical modelling of 3D woven composites with variable tow cross-sections, Computational Materials Science, vol.51, issue.1, pp.103-111, 2012.

D. Pulungan, G. Lubineau, A. Yudhanto, R. Yaldiz, and W. Schijve, « Identifying design parameters controlling damage behaviors of continuous fiber-reinforced thermoplastic composites using micromechanics as a virtual testing tool, International Journal of Solids and Structures, vol.117, pp.177-190, 2017.

W. Ren, Z. Yang, R. Sharma, C. H. Zhang, and P. J. Withers, « Two-dimensional X-ray CT image based meso-scale fracture modelling of concrete, Engineering Fracture Mechanics, vol.133, pp.24-39, 2015.

P. Reynaud, « Etude du comportement en fatigue des matériaux composites a matrice céramique suivi parémissionparémission acoustique, 1992.

R. G. Rinaldi, M. Blacklock, H. Bale, M. R. Begley, and B. N. Cox, « Generating virtual textile composite specimens using statistical data from micro-computed tomography : 3D tow representations, Journal of the Mechanics and Physics of Solids, vol.60, pp.1561-1581, 2012.

E. Riva and G. Nicoletto, « Modeling and prediction of the mechanical properties of woven laminates by the finite element method, WIT Transactions on State, vol.21, 2005.

F. Robitaille, A. C. Long, I. A. Jones, and C. D. Rudd, « Automatically generated geometric descriptions of textile and composite unit cells, Composites Part A : Applied Science and Manufacturing, vol.34, pp.303-312, 2003.

F. Robitaille, B. R. Clayton, A. C. Long, B. J. Souter, and C. D. Rudd, « Geometric modelling of industrial preforms : woven and braided textiles, Proceedings of the Institution of Mechanical Engineers, vol.213, pp.69-83, 1999.

S. Roux and F. Hild, « Stress intensity factor measurements from digital image correlation : post-processing and integrated approaches, International journal of fracture, vol.140, issue.4, pp.141-157, 2006.

S. Roux, F. Hild, P. Viot, and D. Bernard, « Three-dimensional image correlation from X-ray computed tomography of solid foam, Composites Part A : Applied science and manufacturing, vol.39, pp.1253-1265, 2008.

S. Roux, J. Réthoré, and F. Hild, « Digital image correlation and fracture : an advanced technique for estimating stress intensity factors of 2D and 3D cracks, Journal of Physics D : Applied Physics, vol.42, p.214004, 2009.

W. Ruijter, J. Crookston, and A. Long, « E?ects of variable fibre density on mechanical properties of a plain weave glass reinforced polyester, Proc. 16th Int. Conference on Composite Materials, 2007.

J. Schneider, G. Hello, Z. Aboura, M. Benzeggagh, and D. Marsal, « A meso-fe voxel model of an interlock woven composite, Proceeding of the international conference in composite materials 17th (ICCM17), 2009.

A. E. Scott, I. Sinclair, S. M. Spearing, A. Thionnet, and A. R. Bunsell, « Damage accumulation in a carbon/epoxy composite : comparison between a multiscale model and computed tomography experimental results, Composites Part A : Applied Science and Manufacturing, vol.43, pp.1514-1522, 2012.

R. D. Sevenois, D. Garoz, F. A. Gilabert, S. W. Spronk, S. Fonteyn et al., « Avoiding interpenetrations and the importance of nesting in analytic geometry construction for Representative Unit Cells of woven composite laminates, Composites Science and Technology, vol.136, pp.119-132, 2016.

K. M. Sevener, J. M. Tracy, Z. Chen, J. D. Kiser, and S. Daly, « Crack opening behavior in ceramic matrix composites, Journal of the American Ceramic Society, 2017.

M. Sherburn, « Geometric and mechanical modelling of textiles, 2007.

M. Sherburn and A. C. Long, « TexGen open source project, 2010.

C. Simon, F. Rebillat, and G. Camus, « Electrical resistivity monitoring of a SiC/[Si-BC] composite under oxidizing environments, Acta Materialia, vol.132, pp.586-597, 2017.

C. Simon, F. Rebillat, V. Herb, and G. Camus, « Monitoring damage evolution of SiCf/[SiBC] m composites using electrical resistivity : Crack density-based electromechanical modeling, Acta Materialia, vol.124, pp.579-587, 2017.

Y. P. Singh, R. Mansour, and G. N. Morscher, « Combined acoustic emission and multiple lead potential drop measurements in detailed examination of crack initiation and growth during interlaminar testing of ceramic matrix composites, Composites Part A : Applied Science and Manufacturing, vol.97, pp.93-99, 2017.

C. Smith and G. N. Morscher, « Electrical resistance changes of melt infiltrated SiC/SiC loaded in tension at room temperature, Ceramics International, vol.44, pp.183-192, 2018.

P. Spriet and G. Habarou, « Applications of CMCs to turbojet engines : overview of the SEP experience, Key Engineering Materials. T. 127. Trans Tech Publ, pp.1267-1276, 1997.

F. Stig and S. Hallström, « A modelling framework for composites containing 3D reinforcement, Composite Structures, vol.94, pp.2895-2901, 2012.

I. Straumit, S. Lomov, F. Bensadoun, and M. Wevers, « Automatic transformation of 3D micro-CT images into finite element models with anisotropic local properties, ECCM 16 : European conference on composite materials, pp.22-26, 2014.

I. Straumit, S. V. Lomov, and M. Wevers, « Quantification of the internal structure and automatic generation of voxel models of textile composites from X-ray computed tomography data, Composites Part A : Applied Science and Manufacturing, vol.69, pp.150-158, 2015.

C. Studholme, D. L. Hill, and D. J. Hawkes, « An overlap invariant entropy measure of 3D medical image alignment, Pattern recognition, vol.32, pp.71-86, 1999.

S. A. Tabatabaei, E. Bedogni, A. R. Melro, D. S. Ivanov, and S. V. Lomov, « Meso-FE simulation of progressive damage in textile composites using mesh superposition method, ECCM17-17th European Conference on Composite Materials, 2016.

T. Taillandier-thomas, S. Roux, T. F. Morgeneyer, and F. Hild, « Localized strain field measurement on laminography data with mechanical regularization, Nuclear Instruments and Methods in Physics Research Section B : Beam Interactions with Materials and Atoms, vol.324, pp.70-79, 2014.

H. Thom, « Finite element modeling of plain weave composites, Journal of composite materials, vol.33, pp.1491-1510, 1999.

J. Tournois, « Optimisation de maillages, 2009.

J. M. Tracy, « Multi-scale Investigation of Damage Mechanisms in SiC/SiC Ceramic Matrix Composites, 2014.

A. Udayakumar, A. S. Ganesh, S. Raja, and M. Balasubramanian, « E?ect of intermediate heat treatment on mechanical properties of SiCf/SiC composites with BN interphase prepared by ICVI, Journal of the European Ceramic Society, vol.31, pp.1145-1153, 2011.

B. N. Vanaerschot, S. V. Cox, D. Lomov, and . Vandepitte, « Stochastic framework for quantifying the geometrical variability of laminated textile composites using microcomputed tomography, Composites Part A : Applied Science and Manufacturing, vol.44, pp.122-131, 2013.

T. J. Vaughan and C. T. Mccarthy, « A combined experimental-numerical approach for generating statistically equivalent fibre distributions for high strength laminated composite materials, Composites Science and Technology, vol.70, pp.291-297, 2010.

B. Vecina, ´ Etude et développement d'un dispositif d'analyse du comportement mécanique de compositesàcompositesà matrice céramique sous sollicitation de tractionàtractionà chaud par tomographie

. Rapp and . Tech, Laboratoire des Composites Thermo-Structuraux (LCTS) -UMR5801 CNRS-UB-CEA-SAFRAN, vol.33600, 2014.

I. Verpoest and S. V. Lomov, « Virtual textile composites software WiseTex : Integration with micro-mechanical, permeability and structural analysis, Composites Science and Technology, vol.65, pp.2563-2574, 2005.

G. Vigueras, F. Sket, C. Samaniego, L. Wu, L. Noels et al., « An XFEM/CZM implementation for massively parallel simulations of composites fracture, Composite Structures, vol.125, pp.542-557, 2015.

J. Vilfayeau, « Modélisation numérique du procédé de tissage des renforts fibreux pour matériaux composites, 2014.

M. Voorn, U. Exner, and A. Rath, « Multiscale Hessian fracture filtering for the enhancement and segmentation of narrow fractures in 3D image data, Computers & geosciences, vol.57, pp.44-53, 2013.

Y. Wang and X. Sun, « Digital-element simulation of textile processes, Composites science and technology, vol.61, pp.311-319, 2001.

J. Wang and Z. Yu, « A novel method for surface mesh smoothing : applications in biomedical modeling, Proceedings of the 18th international meshing roundtable, pp.195-210, 2009.

X. F. Wang, Z. J. Yang, J. R. Yates, A. P. Jivkov, and C. Zhang, « Monte Carlo simulations of mesoscale fracture modelling of concrete with random aggregates and pores, Construction and Building Materials, vol.75, pp.35-45, 2015.

J. D. Whitcomb, « Three-dimensional stress analysis of plain weave composites, Composite Materials : Fatigue and Fracture (Third Volume, 1991.

B. Widom, « Random sequential addition of hard spheres to a volume, The Journal of Chemical Physics, vol.44, pp.3888-3894, 1966.

P. Wright, A. Moffat, I. Sinclair, and S. M. Spearing, « High resolution tomographic imaging and modelling of notch tip damage in a laminated composite, Composites science and technology, vol.70, pp.1444-1452, 2010.

P. M. Wright, « Investigation of damage in laminated carbon fibre composites using high resolution computed tomography, 2011.

D. Xenos and P. Grassl, « Modelling the failure of reinforced concrete with nonlocal and crack band approaches using the damage-plasticity model CDPM2, Finite Elements in Analysis and Design, vol.117, pp.11-20, 2016.

W. Xu, F. W. Zok, and R. M. Mcmeeking, « Model of Oxidation-Induced Fiber Fracture in SiC/SiC Composites, Journal of the American Ceramic Society, vol.97, pp.3676-3683, 2014.

J. Xu, S. V. Lomov, I. Verpoest, S. Daggumati, W. Van-paepegem et al.,

, « A progressive damage model of textile composites on meso-scale using finite element method : Fatigue damage analysis, Computers & Structures, vol.152, pp.96-112, 2015.

Q. Yang and M. Naderi, « A new augmented finite element method (A-FEM) for progressive failure analysis of advanced composite materials, Numerical Modelling of Failure in Advanced Composite Materials, pp.265-308, 2015.

Z. Yousaf, P. Potluri, P. J. Withers, D. Mollenhauer, E. Zhou et al., « Digital element simulation of aligned tows during compaction validated by computed tomography (CT), International Journal of Solids and Structures, 2017.

M. Yu, J. Liu, R. Gong, P. Jin, E. Han et al., Automatic segmentation of pulmonary fissures in computed tomography images using 3D surface features, Journal of digital imaging, vol.27, pp.58-67, 2014.

B. Yu, R. S. Bradley, C. Soutis, P. J. Hogg, and P. J. Withers, « 2D and 3D imaging of fatigue failure mechanisms of 3D woven composites, Composites Part A : Applied Science and Manufacturing, vol.77, pp.37-49, 2015.

B. Yu, R. Blanc, C. Soutis, and P. J. Withers, « Evolution of damage during the fatigue of 3D woven glass-fibre reinforced composites subjected to tension-tension loading observed by time-lapse X-ray tomography, Composites Part A : Applied Science and Manufacturing, vol.82, pp.279-290, 2016.

B. Yu, R. S. Bradley, C. Soutis, and P. J. Withers, « A comparison of di?erent approaches for imaging cracks in composites by X-ray microtomography, Phil. Trans. R. Soc. A, vol.374, p.20160037, 2016.

M. Zako, Y. Uetsuji, and T. Kurashiki, « Finite element analysis of damaged woven fabric composite materials, Composites Science and Technology, vol.63, pp.507-516, 2003.

J. Zeman and M. Sejnoha, « Numerical evaluation of e?ective elastic properties of graphite fiber tow impregnated by polymer matrix, Journal of the Mechanics and Physics of Solids, vol.49, pp.69-90, 2001.

C. Zhang and W. K. Binienda, « A meso-scale finite element model for simulating free-edge e?ect in carbon/epoxy textile composite, Mechanics of Materials, vol.76, pp.1-19, 2014.

C. Zhang, N. Li, W. Wang, W. K. Binienda, and H. Fang, « Progressive damage simulation of triaxially braided composite using a 3D meso-scale finite element model, Composite Structures, vol.125, pp.104-116, 2015.

Y. J. Zhang, Geometric modeling and mesh generation from scanned images, 2016.

G. Zhou, X. Sun, and Y. Wang, « Multi-chain digital element analysis in textile mechanics, Composites science and Technology, vol.64, pp.239-244, 2004.

Y. Zhou, W. Zhou, F. Luo, and D. Zhu, « E?ects of dip-coated BN interphase on mechanical properties of SiCf/SiC composites prepared by CVI process, Transactions of Nonferrous Metals Society of China, vol.24, pp.1400-1406, 2014.

S. Zhong, L. Guo, H. Lu, and T. Zeng, « A continuum damage model for three-dimensional woven composites and finite element implementation, Composite Structures, vol.128, pp.1-9, 2015.

F. W. Zok, « Ceramic-matrix composites enable revolutionary gains in turbine engine eciency, Am Ceram Soc Bull, vol.95, pp.22-28, 2016.

F. Zok and C. L. Hom, « Large scale bridging in brittle matrix composites, Acta Metallurgica et Materialia, vol.38, pp.1895-1904, 1990.