, AMAG, 2012. Structure -AMAG Austria Metall AG
, , vol.17
Jump processes in surface diffusion, Surf. Sci. Rep, vol.62, pp.39-61, 2007. ,
Sixtieth anniversary issue in honor of Professor Rodney Hill, J. Mech. Phys. Solids, vol.62, pp.113-136, 2014. ,
Sheet Metal Forming Processes: Constitutive Modelling and Numerical Simulation, 2010. ,
Aluminium use in the production of trains steams ahead, 2017. ,
, , vol.17
Viewpoint set no. 35. Metals and alloys with a structural scale from the micrometer to the atomic dimensions, Scr. Mater, vol.51, pp.801-806, 2004. ,
Aluminum: Properties and Physical Metallurgy, 1984. ,
, 2013. Encyclopedia of Thermal Stresses, 2014.
The surface chemistry of Bayer process solids: a review, Colloids Surf. Physicochem. Eng. Asp, vol.146, pp.359-374, 1999. ,
Aluminium macht Car-sharing in Paris mobil, 2012. ,
, Metallic materials -Tensile testing -Part 1: Method of test at room temperature. International Organization for Standardization, International Organization for Standardization, vol.10275, 2007.
Properties of Aluminum Alloys: Fatigue Data and Effects of Temperature, Product Form, and Processing. ASM )nternational, Materials Park, 2008. ,
Introduction to Aluminum Alloys and Tempers, 2000. ,
3 -Production of primary aluminium, Series in Metals and Surface Engineering, pp.49-69, 2011. ,
Mechanical behaviour and springback study of an Aluminium alloy in warm forming conditions, Int. Sch. Res. Not, 2011. ,
URL : https://hal.archives-ouvertes.fr/hal-00716003
Numerical investigations of helical dislocations based on coupled glide-climb model, Int. J. Plast, vol.92, pp.2-18, 2017. ,
Hidden values in bauxite residue (red mud): Recovery of metals, Waste Manag, vol.34, pp.2662-2673, 2014. ,
Friction behaviour in strip draw test of pre-stretched high strength automotive aluminium alloys, Int. J. Mach. Tools Manuf, vol.73, pp.17-24, 2013. ,
Hot Deformation and Processing of Aluminum Alloys, 1 edition, 2011. ,
Three-dimensional numerical simulation of the deep-drawing process using solid finite elements, J. Mater. Process. Technol, vol.97, pp.345-348, 2000. ,
Generation of dislocations during plastic deformation, Mater. Chem. Phys, vol.81, pp.518-523, 2003. ,
Recent development in aluminium alloys for the automotive industry, Mater. Sci. Eng. A, vol.280, pp.37-49, 2000. ,
DOI : 10.1016/s0921-5093(99)00653-x
Aluminum alloys: Structure and properties. Butterworths, London ; Boston. Influence of Aging in the Warm Forming of 6xxx series Aluminum Alloys Vasco Manuel Neto Simões, 1976. ,
Recent development in aluminium alloys for the automotive industry, Mater Sci Eng A, vol.280, pp.818-824, 2000. ,
Variation Modeling for a Sheet Stretch Forming Manufacturing System, CIRP Ann -Manuf Technol, vol.48, pp.63211-63220, 1999. ,
DOI : 10.1016/s0007-8506(07)63211-9
Property Criteria for Automotive Al-Mg-Si Sheet Alloys, Materials, vol.7, pp.5047-5068, 2014. ,
DOI : 10.3390/ma7075047
URL : http://www.mdpi.com/1996-1944/7/7/5047/pdf
Influence of material properties variability on springback and thinning in sheet stamping processes: a stochastic analysis, Int J Adv Manuf Technol, vol.51, pp.117-134, 2010. ,
Tensile properties and work hardening behaviour of alloy 6016 in naturally aged and pre-aged conditions, Proceedings of the 12th International Conference on Aluminium Alloys, pp.2203-2208, 2010. ,
, , p.7075, 2013.
, Al-alloy subject to natural ageing, Mater Des, vol.49, pp.160-167
Effect of composition on clustering reactions in AlMgSi(Cu) alloys, Scr Mater, vol.50, pp.155-158, 2004. ,
Effects of Si on the aging behaviour and formability of aluminium alloys based on AA6016, Mater Sci Eng A, 2001. ,
Hardening of Al-Mg-Si alloys: Effect of trace elements and prolonged natural aging, Mater Des, vol.107, pp.257-268, 2016. ,
Kinetics of natural aging in Al-Mg-Si alloys studied by positron annihilation lifetime spectroscopy, Phys Rev B, vol.83, p.14101, 2011. ,
Chapter 5 -Metallurgy of Heat Treatment and General Principles of Precipitation Hardening, John E. Hatch (ed) Aluminum: Properties and Physical Metallurgy, pp.134-199, 1984. ,
Mechanisms controlling the artificial aging of Al-Mg-Si Alloys, Acta Mater, vol.59, pp.3352-3363, 2011. ,
Effect of natural ageing and pre-straining on strength and anisotropy in aluminium alloy AA 6016, Mater Sci Eng A, vol.639, pp.65-74, 2015. ,
Influence of interrupted quenching and pre-aging on the bake hardening of Al-Mg-Si Alloy, Mater Sci Eng A, vol.651, pp.991-998, 2016. ,
, Influence of Aging in the Warm Forming of 6xxx series Aluminum Alloys Vasco Manuel Neto Simões, 2017.
Strain and strain-rate hardening effects in punch stretching of 5182-0 aluminum at elevated temperatures, Metall. Trans. A, vol.10, pp.41-46, 1979. ,
Natural Aging in AlMg-Si Alloys -A Process of Unexpected Complexity, Adv. Eng. Mater, vol.12, pp.559-571, 2010. ,
Feasibility of warm drawing of aluminium products, J. Mater. Process. Technol, vol.115, pp.118-121, 2001. ,
A systematic comparison of static and dynamic ageing of two Al-Mg-Si alloys, Mater. Sci. Eng. A, vol.373, pp.65-71, 2004. ,
, Metallic materials -Tensile testing -Part 1: Method of test at room temperature. International Organization for Standardization, pp.6892-6893, 2009.
Investigation of the factors influencing the interfacial heat transfer coefficient in hot stamping, J. Mater. Process. Technol., Hot Stamping, vol.228, pp.25-33, 2016. ,
Mise en forme par emboutissage en température d'un alliage d'aluminium AA5754-O (PhDthesis), 2013. ,
The Effect of Temperature on Anisotropy Properties of an Aluminium Alloy, Exp. Mech, vol.51, pp.1185-1195, 2011. ,
Texture control by thermomechanical processing of AA6xxx Al-Mg-Si sheet alloys for automotive applications-a review, Mater. Sci. Eng. A, vol.336, pp.249-262, 2002. ,
Formability and strengthening mechanism of solution treated Al-Mg-Si alloy sheet under hot stamping conditions, J. Mater. Process. Technol., Hot Stamping, vol.228, pp.179-185, 2016. ,
Microstructurally Controlled Mechanical Properties of Al-Mg-Si Alloys for Warm Forming Applications, 2011. ,
Warm deep-drawing and post drawing analysis of two Al-Mg-Si alloys, J. Mater. Process. Technol, vol.214, pp.756-766, 2014. ,
Influence of the temperature on residual stresses and springback effect in an Aluminium alloy, Int. J. Mech. Sci, vol.52, pp.1094-1100, 2010. ,
Aluminium in innovative light-weight car design, Mater. Trans, vol.52, pp.818-824, 2011. ,
Numerical study of the flange earring of deep-drawing sheets with stronger anisotropy, Int. J. Mech. Sci, vol.43, pp.279-296, 2001. ,
Chapter 5 -Metallurgy of Heat Treatment and General Principles of Precipitation Hardening, pp.134-199, 1984. ,
Numerical investigations on springback characteristics of aluminum sheet metal alloys in warm forming conditions, J. Mater. Process. Technol, vol.204, pp.370-383, 2008. ,
Combined effect of deformation and artificial aging on mechanical properties of Al-Mg-Si Alloy, Trans. Nonferrous Met. Soc. China, vol.22, issue.11, pp.61393-61402, 2012. ,
Experimental and numerical studies on the warm deep drawing of an Al-Mg alloy, Int. J. Mech. Sci, vol.93, pp.59-72, 2015. ,
Tensile deformation behavior of aluminum alloys at warm forming temperatures, Mater. Sci. Eng. A, vol.352, pp.279-286, 2003. ,
Biaxial warm forming behavior of aluminum sheet alloys, J. Mater. Process. Technol, vol.145, pp.281-293, 2004. ,
Influence of process parameters on deep drawing of AA6111 aluminum alloy at elevated temperatures, J. Cent. South Univ, vol.22, pp.1167-1174, 2015. ,
Benchmark 3 -Springback of an Al-Mg alloy in warm forming conditions, J. Phys. Conf. Ser, vol.734, p.22003, 2016. ,
URL : https://hal.archives-ouvertes.fr/hal-02110761
Effect of tool temperature on the reduction of the springback of aluminum sheets, J. Mater. Process. Technol, vol.132, pp.925-926, 2003. ,
Deep drawability of type 5083 aluminium-magnesium alloy sheet under various conditions of temperature and forming speed, J. Mater. Process. Technol. 89, vol.90, pp.19-23, 1999. ,
Thermo-mechanical finite element analysis of the AA5086 alloy under warm forming conditions, Int. J. Solids Struct, 2017. ,
Warm HydroForming of the heat treatable aluminium alloy AC170PX, J. Manuf. Process. 20, Part, vol.1, pp.24-32, 2015. ,
Numerical and experimental investigations on the Warm Deep Drawing process of circular aluminum alloy specimens, J. Mater. Process. Technol, vol.184, pp.115-123, 2007. ,
Characterization of Tensile Properties, Limiting Strains, and Deep Drawing Behavior of AA5754-H22 Sheet at Elevated Temperature, J. Mater. Eng. Perform, vol.24, pp.4267-4282, 2015. ,
Aluminum Alloys with Identical Plastic Flow and Different Strain Rate Sensitivity, Metall. Mater. Trans. A, vol.41, pp.3358-3364, 2010. ,
Warm forming of aluminium/magnesium alloy sheet, J. Mech. Work. Technol, vol.2, pp.279-290, 1978. ,
The impact of warm forming in the natural aging of Al-Mg-Si alloys, Submitt. Int. J. Mater. Form, 2017. ,
Numerical study of springback using the split-ring test: influence of the clearance between the die and the punch, Int. J. Mater. Form. 1-13, 2017. ,
Aluminium versus steel in the family car -the formability factor, J. Mech. Work. Technol, vol.16, pp.257-277, 1988. ,
Springback Behavior of AA6111-T4 with Split-Ring Test, AIP Conference Proceedings. Presented at the MATERIALS PROCESSING AND DESIGN: Modeling, Simulation and Applications -NUMIFORM 2004 -Proceedings of the 8th International Conference on Numerical Methods in Industrial Forming Processes, pp.934-939, 2004. ,
, Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials, 2009.
Enhanced ductility in an aluminum-4 Pct magnesium alloy at elevated temperature, Metall. Trans. A, vol.8, pp.487-492, 1977. ,
Feasibility of warm drawing of aluminium products, J. Mater. Process. Technol, vol.115, pp.118-121, 2001. ,
Investigation of the factors influencing the interfacial heat transfer coefficient in hot stamping, J. Mater. Process. Technol., Hot Stamping, vol.228, pp.25-33, 2016. ,
Mise en forme par emboutissage en température d'un alliage d'aluminium AA5754-O (PhD-thesis), 2013. ,
The Effect of Temperature on Anisotropy Properties of an Aluminium Alloy, Exp. Mech, vol.51, pp.1185-1195, 2011. ,
Deep drawing process: analysis and experiment, J. Mater. Process. Technol, vol.132, pp.35-41, 2003. ,
Formability and strengthening mechanism of solution treated Al-Mg-Si alloy sheet under hot stamping conditions, 2004. Tensile Testing, vol.228, pp.179-185, 2016. ,
Warm deep-drawing and post drawing analysis of two Al-Mg-Si alloys, J. Mater. Process. Technol, vol.214, pp.756-766, 2014. ,
An investigation of springback stresses in AISI-1010 deep drawn cups, Mater. Sci. Eng. A, Measurement and Interpretation of Internal/Residual Stresses, vol.399, pp.26-32, 2005. ,
Influence of the temperature on residual stresses and springback effect in an Aluminium alloy, Int. J. Mech. Sci, vol.52, pp.1094-1100, 2010. ,
Warm forming die design, Part III: Design and validation of a warm forming die, J. Manuf. Process, vol.20, pp.356-366, 2015. ,
Chapter 5 -Metallurgy of Heat Treatment and General Principles of Precipitation Hardening, pp.134-199, 1984. ,
, Metallic materials -Tensile testing -Part 2: Method of test at elevated temperature. International Organization for Standardization, ISO, vol.6892, issue.2, 2009.
A review on hot stamping, J. Mater. Process. Technol, vol.210, pp.2103-2118, 2010. ,
Numerical investigations on springback characteristics of aluminum sheet metal alloys in warm forming conditions, J. Mater. Process. Technol, vol.204, pp.370-383, 2008. ,
Precipitation kinetics in warm forming of AW-7020 alloy, Mater. Sci. Eng. A, vol.561, pp.362-370, 2013. ,
Influence of temper on the performance of a high-strength Al-ZnMg alloy sheet in the warm forming processing chain, J. Mater. Process. Technol, vol.231, pp.189-198, 2016. ,
Experimental and numerical studies on the warm deep drawing of an Al-Mg alloy, Int. J. Mech. Sci, vol.93, pp.59-72, 2015. ,
Benchmark 3 -Springback of an AlMg alloy in warm forming conditions, J. Phys. Conf. Ser, vol.734, p.22003, 2016. ,
URL : https://hal.archives-ouvertes.fr/hal-02110761
, Influence of Aging in the Warm Forming of 6xxx series Aluminum Alloys Vasco Manuel Neto Simões, 2017.
Numerical analysis of different heating systems for warm sheet metal forming, Int. J. Adv. Manuf. Technol, vol.83, pp.897-909, 2015. ,
Effect of tool temperature on the reduction of the springback of aluminum sheets, J. Mater. Process. Technol, vol.132, pp.365-368, 2003. ,
Optimization of the tool geometry in the deep drawing of aluminium, J. Mater. Process. Technol, vol.72, pp.196-205, 1997. ,
Application of 3D numerical modelling for thermal profile optimization on the Gleeble thermomechanical simulator, Model. Simul. Mater. Sci. Eng, vol.7, p.297, 1999. ,
Warm HydroForming of the heat treatable aluminium alloy AC170PX, J. Manuf. Process. 20, Part, vol.1, pp.24-32, 2015. ,
Mechanisms controlling the artificial aging of Al-Mg-Si Alloys, Acta Mater, vol.59, pp.3352-3363, 2011. ,
Warm forming of aluminium/magnesium alloy sheet, J. Mech. Work. Technol, vol.2, pp.279-290, 1978. ,
DOI : 10.1016/0378-3804(78)90023-2
The impact of warm forming in the natural aging of Al-Mg-Si alloys, Submitt. Int. J. Mater. Form, 2017. ,
On the punch speed influence in warm forming and springback of two Al-Mg-Si alloys, 2017. ,
Numerical study of springback using the split-ring test: influence of the clearance between the die and the punch, Int. J. Mater. Form. 1-13, 2017. ,
Warm forming behavior of high strength aluminum alloy AA7075, Trans. Nonferrous Met. Soc. China, vol.1, issue.11, p.61131, 2012. ,
, Design strategy for controlled natural aging in Al-Mg-Si alloys, 2016.
DOI : 10.1016/j.actamat.2016.07.048
, Acta Mater, vol.118, pp.296-305
Aluminium versus steel in the family car -the formability factor, J. Mech. Work. Technol, vol.16, pp.257-277, 1988. ,
Springback Behavior of AA6111-T4 with Split-Ring Test, AIP Conference Proceedings. Presented at the MATERIALS PROCESSING AND DESIGN: Modeling, Simulation and Applications -NUMIFORM 2004 -Proceedings of the 8th International Conference on Numerical Methods in Industrial Forming Processes, pp.934-939, 2004. ,
DOI : 10.1063/1.1766647
A benchmark test for springback simulation in sheet metal forming, 2000. ,
Residual stress in the cylindrical drawing cup of SUS304 stainless steel evaluated by split-ring test, Acta Mech Sinica, vol.32, pp.125-134, 2016. ,
Springback behavior of AA6111-T4 with split-ring test, AIP Conf. Proc, pp.934-939, 2004. ,
Robustness of the sheet metal springback cup test, Metall Mater Trans A, vol.37, pp.3503-3510, 2006. ,
Influence of constitutive model in springback prediction using the split-ring test, 2009. ,
URL : https://hal.archives-ouvertes.fr/hal-00400919
, Int J Mech Sci, vol.51, pp.233-245
Numerical study of springback using the split-ring test for an AA5754 aluminum alloy, 2010. ,
URL : https://hal.archives-ouvertes.fr/hal-00494094
, Finite Elem Anal Des, vol.46, pp.751-759
A synchrotron study of residual stresses in a Al6022 deep drawn cup, Mater Sci Eng A, vol.366, pp.104-113, 2004. ,
An investigation of springback stresses in AISI-1010 deep drawn cups, 2005. ,
, Mater Sci Eng A, vol.399, pp.26-32
Study on the influence of work-hardening modeling in springback prediction, Int J Plast, vol.23, pp.516-543, 2007. ,
Constitutive modeling for anisotropic/asymmetric hardening behavior of magnesium alloy sheets: application to sheet springback, Int J Plast, vol.25, pp.70-104, 2009. ,
Simulation of springback, Int J Mech Sci, vol.44, pp.103-122, 2002. ,
DOI : 10.1016/s0020-7403(01)00083-2
Numerical product design: Springback prediction, compensation and optimization, Int J Mach Tools Manuf, vol.48, pp.499-514, 2008. ,
DOI : 10.1016/j.ijmachtools.2007.08.006
URL : https://ris.utwente.nl/ws/files/6794918/IJMTM07_II_meinders.pdf
Effect of ironing on the residual stresses in deep drawn cups, J Mater Process Technol, vol.99, pp.54-61, 2000. ,
Experimental and numerical studies on the warm deep drawing of an al-mg alloy, Int J Mech Sci, vol.93, pp.59-72, 2015. ,
Benchmark 3 -Springback of an al-mg alloy in warm forming conditions, J Phys Conf Ser, vol.734, p.22003, 2016. ,
URL : https://hal.archives-ouvertes.fr/hal-02110761
Natural aging effect on the forming behavior of a cylindrical cup with an almg-Si alloy, AIP Conf. Proc, pp.1-6, 2016. ,
Three-dimensional numerical simulation of the deep-drawing process using solid finite elements, J Mater Process Technol, vol.97, pp.345-348, 2000. ,
Algorithms and strategies for treatment of large deformation frictional contact in the numerical simulation of deep drawing process, Arch Comput Methods Eng, vol.15, pp.1220-1225, 2008. ,
Surface smoothing procedures in computational contact mechanics, Arch Comput Methods Eng, vol.24, pp.37-87, 2015. ,
Trimming of 3D solid finite element meshes: sheet metal forming tests and applications, Eng Comput, vol.31, pp.237-257, 2015. ,
Trimming of 3D solid finite element meshes using parametric surfaces: application to sheet metal forming, Finite Elem Anal Des, vol.42, pp.1053-1060, 2006. ,
Generalization of selective integration procedures to anisotropic and nonlinear media, Int J Numer Methods Eng, vol.15, pp.1413-1418, 1980. ,
Simulation of springback: throughthickness integration, Int J Plast, vol.23, pp.345-360, 2007. ,
Applying Nagata patches to smooth discretized surfaces used in 3D frictional contact problems, Comput Methods Appl Mech Eng, vol.271, pp.296-320, 2014. ,
Nagata patch interpolation using surface normal vectors evaluated from the IGES file, Finite Elem Anal Des, vol.72, pp.35-46, 2013. ,
Simple local interpolation of surfaces using normal vectors, Comput Aided Geom Des, vol.22, pp.327-347, 2005. ,
Thermo-mechanical finite element analysis of the AA5086 alloy under warm forming conditions. Submitted to, Int J Solids Struct, 2017. ,
Detailed experimental and numerical analysis of a cylindrical cup deep drawing. Submitted to, Int J Mater Form, 2017. ,
The relationship between stress and strain for homogeneous deformations, J Inst Met, vol.74, pp.537-562, 1948. ,
A practical strain-hardening function, Meta, vol.51, pp.219-226, 1955. ,
Prediction and elimination of springback in straight flanging using computer aided design methods: part 1. Experimental investigations, J Mater Process Technol, vol.117, pp.262-268, 2001. ,
Ironing of thin walled cans, CIRP Ann -Manuf Technol, vol.50, pp.165-168, 2001. ,
Numerical simulation of sheet metal forming using anisotropic strain-rate potentials, Mater Sci Eng A, vol.517, pp.261-275, 2009. ,
URL : https://hal.archives-ouvertes.fr/hal-01192743
A study of longitudinal cracking and the forming technology for deep-drawn austenitic stainless-steel cups, J Mater Process Technol, vol.30, p.90344, 1992. ,
Comparing faceted and smoothed tool surface descriptions in sheet metal forming simulation, Int J Mater Form, vol.8, pp.549-565, 2014. ,
, Adv. Eng. Mater, vol.12, p.559, 2010.
, Metallic Materials -Tensile Testing -Part 1: Method of Test at Room Temperature (International Organization for Standardization, Central Secretariat ISO, p.65, 2009.
Experimental Investigation and Numerical Prediction of Rupture in Bending of Metallic Sheets, 2013. ,
, Mater. Sci. Eng. A, vol.527, p.5307, 2010.
, Scr. Mater, vol.50, p.155, 2004.
, Acta Mater, vol.51, p.3467, 2003.
, Acta Mater, vol.53, p.5257, 2005.
, Metall. Z. Für Gesamte Hüttenkd, vol.8, p.225, 1911.
, Nature, vol.142, p.569, 1938.
, Nature, vol.142, p.570, 1938.
, , vol.4, p.89, 1939.
, Mater. Sci. Eng. A, vol.627, p.119, 2015.
, Jelt Grease 5411 aerosol 95cSt
, Int. J. Mech. Sci, vol.93, p.59, 2015.
Mise En Forme Par Emboutissage En Température D'un Alliage D'aluminium AA5754-O, 2013. ,
, J. Inst. Met, vol.537, 1948.
, Int. J. Plast, vol.7, p.693, 1991.
, AIP Conf. Proc, vol.712, p.1645, 2004.
, J. Mater. Process. Technol, vol.97, p.100, 2000.
, Comput.-Aided Des, vol.45, p.639, 2013.
Analysis of the Influence of Process Parameters in the Deep Drawing of a Cylindrical Cup, 2012. ,
, Key Eng. Mater, p.2256, 2013.
, J. Mater. Process. Technol, vol.132, p.35, 2003.
, 18 Influence of Aging in the Warm Forming of 6xxx series Aluminum Alloys Vasco Manuel Neto Simões, vol.46, 2017.