. .. Collé, 108 6.1.1 Description de l'échantillon

. .. Applications-À-un-guide-non-constant, 132 6.2.2 Guide rectangulaire avec réduction de section

, Conclusion sur l'application à d'autres guides

.. .. Conclusions,

. Bibliographie,

J. L. Rose, A baseline and vision of ultrasonic guided wave inspection potential, Journal of pressure vessel technology, vol.124, p.6, 2002.

P. Cawley and D. Alleyne, The use of Lamb waves for the long range inspection of large structures, Ultrasonics, vol.34, p.6, 1996.

P. D. Wilcox, Omni-directional guided wave transducer arrays for the rapid inspection of large areas of plate structures. Ultrasonics, Ferroelectrics, and Frequency Control, IEEE Transactions on, vol.50, p.1, 2003.

Z. Su, L. Ye, and Y. Lu, Guided Lamb waves for identification of damage in composite structures : a review, Journal of sound and vibration, vol.295, p.15, 2006.

S. S. Kessler, S. M. Spearing, and C. Soutis, Damage detection in composite materials using Lamb wave methods, Smart Materials and Structures, vol.11, p.24, 2002.

M. Beard, M. Lowe, and P. Cawley, Ultrasonic guided waves for inspection of grouted tendons and bolts, Journal of Materials in Civil Engineering, vol.15, p.1, 2003.

P. H. Nicholson, P. Moilanen, T. Kärkkäinen, J. Timonen, and S. Cheng, Guided ultrasonic waves in long bones : modelling, experiment and in vivo application, Physiological measurement, vol.23, p.1, 2002.

P. Kauffmann, Étude de la propagation, de la réémission et de la transmission des ondes de Lamb en vue du Contrôle Non Destructif de structures de réacteurs nucléaires refroidis au sodium liquide, p.1, 2018.

M. Castaings, SH ultrasonic guided waves for the evaluation of interfacial adhesion, ? p. xiii, vol.54, p.71, 1920.

C. R. Farrar and K. Worden, An introduction to structural health monitoring, Philosophical Transactions of the Royal Society of London A : Mathematical, Physical and Engineering Sciences, vol.365, p.21, 2007.

K. Worden, C. R. Farrar, G. Manson, and G. Park, The fundamental axioms of structural health monitoring, Proceedings of the Royal Society of London A : Mathematical, Physical and Engineering Sciences, vol.463, p.21, 2007.

J. L. Rose, Ultrasonic Waves in Solid Media, p.2, 2004.

A. Raghavan and C. E. Cesnik, Review of guided-wave structural health monitoring. The Shock and Vibration Digest, ? p. xiii, vol.39, p.22, 2007.

V. Giurgiutiu, Structural Health Monitoring with Piezoelectric Wafer Active Sensors, p.22, 2008.

D. N. Alleyne and P. Cawley, The interaction of Lamb waves with defects. Ultrasonics, Ferroelectrics, and Frequency Control, IEEE Transactions on, vol.39, p.18, 1992.

J. Rose, A. Pilarski, and J. Ditri, An approach to guided wave mode selection for inspection of laminated plate, Journal of reinforced plastics and composites, vol.12, p.31, 1993.

P. Wilcox, M. Lowe, and P. Cawley, Mode and transducer selection for long range Lamb wave inspection, Journal of Intelligent Material Systems and Structures, vol.12, p.31, 2001.

N. Quaegebeur, P. Micheau, P. Masson, and M. Castaings, Methodology for optimal configuration in structural health monitoring of composite bonded joints, Smart Materials and Structures, vol.21, p.112, 2012.

H. Lamb, On waves in an elastic plate, Proceedings of the Royal Society of London A : Mathematical, Physical and Engineering Sciences, vol.93, p.6, 1917.

D. Worlton, Experimental confirmation of Lamb waves at megacycle frequencies, Journal of Applied Physics, vol.32, p.6, 1961.

J. D. Achenbach, Wave Propagation in Elastic Solids, vol.10, p.68, 1975.

K. F. Graff, Wave motion in elastic solids, Courier Corporation, p.6, 1975.

B. A. Auld, Acoustic Fields and Waves in Solids (RE Krieger, 1990), 2 edn, p.6

D. Royer and E. Dieulesaint, propagation libre et guidée (Masson, 1996). ? p. xiii, vol.1, p.109

D. Donskoy, A. Sutin, and A. Ekimov, Nonlinear acoustic interaction on contact interfaces and its use for nondestructive testing, Ndt & E International, vol.34, p.8, 2001.

D. Yan, B. W. Drinkwater, and S. A. Neild, Measurement of the ultrasonic nonlinearity of kissing bonds in adhesive joints, NDT & E International, vol.42, p.8, 2009.

G. Scarselli, F. Ciampa, D. Ginzburg, and M. Meo, Non-destructive testing techniques based on nonlinear methods for assessment of debonding in single lap joints, SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring, p.8, 2015.

B. Chen, S. Soh, H. Lee, T. Tay, and V. B. Tan, A vibro-acoustic modulation method for the detection of delamination and kissing bond in composites, Journal of Composite Materials, vol.50, p.8, 2016.

P. Wilcox, M. Lowe, and P. Cawley, The effect of dispersion on long-range inspection using ultrasonic guided waves, NDT & E International, vol.34, p.12, 2001.

M. J. Lowe, Matrix techniques for modeling ultrasonic waves in multilayered media, IEEE transactions on ultrasonics, vol.42, p.12, 1995.

B. Pavlakovic, M. Lowe, D. Alleyne, and P. Cawley, Disperse : a general purpose program for creating dispersion curves, Review of progress in quantitative nondestructive evaluation, p.12, 1997.

B. Hosten and M. Castaings, Surface impedance matrices to model the propagation in multilayered media, Ultrasonics, vol.41, p.12, 2003.

I. Bartoli, A. Marzani, F. L. Di-scalea, and E. Viola, Modeling wave propagation in damped waveguides of arbitrary cross-section, Journal of Sound and Vibration, vol.295, p.139, 2006.

M. Castaings and M. Lowe, Finite element model for waves guided along solid systems of arbitrary section coupled to infinite solid media, The Journal of the Acoustical Society of America, vol.123, p.13, 2008.

M. J. Lowe, D. N. Alleyne, and P. Cawley, Defect detection in pipes using guided waves, Ultrasonics, vol.36, p.33, 1998.

P. Cawley, M. Lowe, D. Alleyne, B. Pavlakovic, and P. Wilcox, Practical long range guided wave testing : Applications to pipes and rail, Materials evaluation, vol.61, p.33, 2003.

R. Mindlin and E. Fox, Vibrations and waves in elastic bars of rectangular cross section, Journal of Applied mechanics, vol.27, p.13, 1960.

N. J. Nigro, Steady-state wave propagation in infinite bars of noncircular cross section, The Journal of the Acoustical Society of America, vol.40, p.13, 1966.

W. Fraser, Stress wave propagation in rectangular bars, International Journal of Solids and Structures, vol.5, p.13, 1969.

B. Aalami, Waves in prismatic guides of arbitrary cross section, Journal of Applied Mechanics, vol.40, p.13, 1973.

H. Taweel, S. Dong, and M. Kazic, Wave reflection from the free end of a cylinder with an arbitrary cross-section, International Journal of Solids and Structures, vol.37, p.68, 2000.

P. Wilcox, M. Evans, O. Diligent, M. Lowe, and P. Cawley, Dispersion and excitability of guided acoustic waves in isotropic beams with arbitrary cross section, Review of Quantitative Nondestructive Evaluation, vol.21, p.40, 2002.

T. Hayashi, W. Song, and J. L. Rose, Guided wave dispersion curves for a bar with an arbitrary cross-section, a rod and rail example, Ultrasonics, vol.41, p.139, 2003.

I. Bartoli, F. L. Di-scalea, M. Fateh, and E. Viola, Modeling guided wave propagation with application to the long-range defect detection in railroad tracks, NDT & E International, vol.38, p.13, 2005.

A. Gunawan and S. Hirose, Boundary element analysis of guided waves in a bar with an arbitrary cross-section. Engineering analysis with boundary elements, vol.29, p.69, 2005.

Y. Liu, Computation of dispersion relations of functionally graded rectangular bars, Composite Structures, vol.133, p.13, 2015.

F. Cegla, Energy concentration at the center of large aspect ratio rectangular waveguides at high frequencies, The Journal of the Acoustical Society of America, vol.123, p.69, 2008.

F. B. Cegla, P. Cawley, J. Allin, and J. Davies, High-temperature ( > 500 C) wall thickness monitoring using dry-coupled ultrasonic waveguide transducers, IEEE transactions on ultrasonics, ferroelectrics, and frequency control, vol.58, p.13, 2011.

O. M. Mukdadi, Y. Desai, S. Datta, A. Shah, and A. Niklasson, Elastic guided waves in a layered plate with rectangular cross section, The Journal of the Acoustical Society of America, vol.112, p.13, 2002.

N. Juluri, M. Lowe, and P. Cawley, The guiding of ultrasound by a welded joint in a plate, AIP Conference Proceedings, vol.894, p.15, 2007.

Z. Fan and M. J. Lowe, Elastic waves guided by a welded joint in a plate, Proceedings of the Royal Society of London A : Mathematical, Physical and Engineering Sciences, vol.465, p.14, 2009.

A. Ramdhas, R. K. Pattanayak, K. Balasubramaniam, and P. Rajagopal, Antisymmetric featureguided ultrasonic waves in thin plates with small radius transverse bends from low-frequency symmetric axial excitation, The Journal of the Acoustical Society of America, vol.134, p.15, 2013.

A. Ramdhas, R. K. Pattanayak, K. Balasubramaniam, and P. Rajagopal, Symmetric low-frequency feature-guided ultrasonic waves in thin plates with transverse bends, Ultrasonics, vol.56, p.14, 2015.

X. Yu, M. Ratassepp, and Z. Fan, Damage detection in quasi-isotropic composite bends using ultrasonic feature guided waves, Composites Science and Technology, vol.141, p.18, 2017.

Z. Fan, M. Castaings, M. J. Lowe, C. Biateau, and P. Fromme, Feature-guided waves for monitoring adhesive shear modulus in bonded stiffeners, NDT & E International, vol.54, p.14, 2013.

X. Yu, Z. Fan, M. Castaings, and C. Biateau, Feature guided wave inspection of bond line defects between a stiffener and a composite plate, NDT & E International, vol.89, p.20, 2017.

R. K. Pattanayak, P. Manogharan, K. Balasubramaniam, and P. Rajagopal, Low frequency axisymmetric longitudinal guided waves in eccentric annular cylinders, The Journal of the Acoustical Society of America, vol.137, p.14, 2015.

N. Guo and P. Cawley, The interaction of Lamb waves with delaminations in composite laminates, The Journal of the Acoustical Society of America, vol.94, p.31, 1993.

A. Leleux, Contrôle non destructif de composites par ondes ultrasonores guidées, générées et détec-tées par multiéléments, p.16, 2012.

R. Ribichini, F. Cegla, P. B. Nagy, and P. Cawley, Study and comparison of different EMAT configurations for SH wave inspection, IEEE transactions on ultrasonics, ferroelectrics, and frequency control, vol.58, p.16, 2011.

M. Castaings and P. Cawley, The generation, propagation, and detection of Lamb waves in plates using air-coupled ultrasonic transducers, The Journal of the Acoustical Society of America, vol.100, p.16, 1996.

M. Castaings and B. Hosten, Lamb and SH waves generated and detected by air-coupled ultrasonic transducers in composite material plates, NDT & E International, vol.34, p.16, 2001.

M. Lowe and O. Diligent, Low-frequency reflection characteristics of the S0 Lamb wave from a rectangular notch in a plate, The Journal of the Acoustical Society of America, vol.111, p.18, 2002.

O. Diligent, T. Grahn, A. Boström, P. Cawley, and M. J. Lowe, The low-frequency reflection and scattering of the S0 Lamb mode from a circular through-thickness hole in a plate : Finite element, analytical and experimental studies, The Journal of the Acoustical Society of America, vol.112, p.18, 2002.

M. Castaings, E. Le-clezio, and B. Hosten, Modal decomposition method for modeling the interaction of Lamb waves with cracks, The Journal of the Acoustical Society of America, vol.112, p.18, 2002.
URL : https://hal.archives-ouvertes.fr/hal-01804529

Z. Fan and M. Lowe, Interaction of weld-guided waves with defects, ? p. xiii, vol.47, p.19, 2012.

A. Leleux, P. Micheau, and M. Castaings, Long range detection of defects in composite plates using Lamb waves generated and detected by ultrasonic phased array probes, Journal of Nondestructive Evaluation, vol.32, p.32, 2013.

P. B. Nagy and L. Adler, Nondestructive evaluation of adhesive joints by guided waves, Journal of Applied Physics, vol.66, p.19, 1989.

M. Lowe and P. Cawley, The applicability of plate wave techniques for the inspection of adhesive and diffusion bonded joints, Journal of Nondestructive Evaluation, vol.13, p.19, 1994.

J. Rose, K. Rajana, and M. Hansch, Ultrasonic guided waves for NDE of adhesively bonded structures, The Journal of Adhesion, vol.50, p.20, 1995.

M. Lowe, R. Challis, and C. Chan, The transmission of Lamb waves across adhesively bonded lap joints, The Journal of the Acoustical Society of America, vol.107, p.19, 2000.

E. Siryabe, Évaluation non destructive par ultrasons de l'adhésion aux interfaces de joints collés, p.19, 2016.

X. Yu, Z. Fan, S. Puliyakote, and M. Castaings, Remote monitoring of bond line defects between a composite panel and a stiffener using distributed piezoelectric sensors, Smart Materials and Structures, vol.27, p.27, 2018.

K. Worden and J. Dulieu-barton, An overview of intelligent fault detection in systems and structures, Structural Health Monitoring, vol.3, p.20, 2004.

J. D. Achenbach, Structural health monitoring-what is the prescription ?, Mechanics Research Communications, vol.36, p.20, 2009.

C. Boller, F. Chang, and Y. Fujino, Encyclopedia of Structural Health Monitoring, p.20, 2009.

W. K. Wilkie, Low-cost piezocomposite actuator for structural control applications, Smart structures and materials 2000 : industrial and commercial applications of smart structures technologies, vol.3991, p.21, 2000.

Y. Zhang, In situ fatigue crack detection using piezoelectric paint sensor, ? p. xiii, vol.17, p.22, 2006.

S. W. Doebling, C. R. Farrar, M. B. Prime, and D. W. Shevitz, Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics : a literature review, p.22, 1996.

H. Sohn, A review of structural health monitoring literature, p.22, 1996.

D. Montalvao, N. M. Maia, and A. M. Ribeiro, A review of vibration-based structural health monitoring with special emphasis on composite materials, Shock and Vibration Digest, vol.38, p.22, 2006.

V. Giurgiutiu, Structural Health Monitoring of Aerospace Composites, p.22, 2015.

C. Boller, Next generation structural health monitoring and its integration into aircraft design, International Journal of Systems Science, vol.31, p.22, 2000.

K. Diamanti and C. Soutis, Structural health monitoring techniques for aircraft composite structures, Progress in Aerospace Sciences, vol.46, p.22, 2010.

E. Moulin, J. Assaad, C. Delebarre, H. Kaczmarek, and D. Balageas, Piezoelectric transducer embedded in a composite plate : application to Lamb wave generation, Journal of Applied Physics, vol.82, p.22, 1997.

V. Giurgiutiu, J. Bao, and W. Zhao, Active sensor wave propagation health monitoring of beam and plate structures, SPIE's 8th Annual International Symposium on Smart Structures and Materials, p.22, 2001.

C. H. Wang, J. T. Rose, and F. Chang, A synthetic time-reversal imaging method for structural health monitoring, Smart materials and structures, vol.13, p.27, 2004.

J. Ihn and F. Chang, Detection and monitoring of hidden fatigue crack growth using a builtin piezoelectric sensor/actuator network : I. diagnostics, Smart Materials and Structures, vol.13, p.27, 2004.

V. Giurgiutiu, Tuned Lamb wave excitation and detection with piezoelectric wafer active sensors for structural health monitoring, Journal of intelligent material systems and structures, vol.16, p.87, 2005.

X. Zhao, Active health monitoring of an aircraft wing with embedded piezoelectric sensor/actuator network : I. defect detection, localization and growth monitoring, Smart materials and structures, vol.16, p.27, 2007.

M. Lin and F. Chang, The manufacture of composite structures with a built-in network of piezoceramics, Composites Science and Technology, vol.62, p.26, 2002.

Z. Su, X. Wang, Z. Chen, L. Ye, and D. Wang, A built-in active sensor network for health monitoring of composite structures, Smart Materials and Structures, vol.15, p.26, 2006.

M. Ng-&-veidt, A Lamb-wave-based technique for damage detection in composite laminates, Smart materials and structures, vol.25, p.27, 2009.

N. Quaegebeur, P. Micheau, P. Masson, and A. Maslouhi, Structural health monitoring strategy for detection of interlaminar delamination in composite plates, Smart Materials and Structures, vol.19, p.31, 2010.

J. Ihn and F. Chang, Pitch-catch active sensing methods in structural health monitoring for aircraft structures, Structural Health Monitoring, vol.7, p.27, 2008.

M. H. Sherafat, Structural health monitoring of a composite skin-stringer assembly using within-the-bond strategy of guided wave propagation, Materials & Design, vol.90, p.26, 2016.

V. Memmolo, E. Monaco, N. Boffa, L. Maio, and F. Ricci, Guided wave propagation and scattering for structural health monitoring of stiffened composites, Composite Structures, vol.184, p.27, 2018.

K. Diamanti, C. Soutis, and J. Hodgkinson, Piezoelectric transducer arrangement for the inspection of large composite structures, Composites Part A : Applied Science and Manufacturing, vol.38, p.27, 2007.

G. Park, T. Rosing, M. D. Todd, C. R. Farrar, and W. Hodgkiss, Energy harvesting for structural health monitoring sensor networks, Journal of Infrastructure Systems, vol.14, p.27, 2008.

X. Zhao, Active health monitoring of an aircraft wing with an embedded piezoelectric sensor/actuator network : II. wireless approaches. Smart materials and structures, vol.16, p.27, 2007.

Y. Wang, J. P. Lynch, and K. H. Law, A wireless structural health monitoring system with multithreaded sensing devices : design and validation, Structure and Infrastructure Engineering, vol.3, p.27, 2007.

K. Worden and G. Manson, The application of machine learning to structural health monitoring, Philosophical Transactions of the Royal Society of London A : Mathematical, Physical and Engineering Sciences, vol.365, p.27, 2007.

J. Moriot, N. Quaegebeur, A. Le-duff, and P. Masson, A model-based approach for statistical assessment of detection and localization performance of guided wave-based imaging techniques, Structural Health Monitoring, p.27, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01656780

D. Alleyne and P. Cawley, A two-dimensional Fourier transform method for the measurement of propagating multimode signals, The Journal of the Acoustical Society of America, vol.89, p.28, 1991.

D. W. Tufts and R. Kumaresan, Estimation of frequencies of multiple sinusoids : Making linear prediction perform like maximum likelihood, Proceedings of the IEEE, vol.70, p.30, 1982.

J. Ma, P. J. Matuszyk, R. K. Mallan, C. Torres-verdín, and B. C. Voss, Joint processing of forward and backward extended prony and weighted spectral semblance methods for robust extraction of velocity dispersion data, SPWLA 51st Annual Logging Symposium, p.30, 2010.

T. K. Sarkar and O. Pereira, Using the matrix pencil method to estimate the parameters of a sum of complex exponentials, IEEE Antennas and Propagation Magazine, vol.37, p.31, 1995.

M. P. Ekstrom, Dispersion estimation from borehole acoustic arrays using a modified matrix pencil algorithm, Proceedings of Asilomar-29, p.30, 1996.

R. Schmidt, Multiple emitter location and signal parameter estimation, vol.34, p.30, 1986.

L. Ambrozinski, Identification of material properties-efficient modelling approach based on guided wave propagation and spatial multiple signal classification, Structural Control and Health Monitoring, vol.22, p.30, 2015.

P. Zabbal, G. Ribay, B. Chapuis, and J. Jumel, Multichannel multiple signal classification for dispersion curves extraction of ultrasonic guided waves, The Journal of the Acoustical Society of America, vol.143, p.30, 2018.
URL : https://hal.archives-ouvertes.fr/cea-01765665

Y. Luo, Rayleigh-wave dispersive energy imaging using a high-resolution linear radon transform, Pure and Applied Geophysics, vol.165, p.30, 2008.

T. N. Tran, K. T. Nguyen, M. D. Sacchi, and L. H. Le, Imaging ultrasonic dispersive guided wave energy in long bones using linear radon transform, Ultrasound in medicine & biology, vol.40, p.30, 2014.

K. Xu, Sparse SVD method for high resolution extraction of the dispersion curves of ultrasonic guided waves, IEEE Trans. Ultrason. Ferroelectr. Freq. Control, p.31, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01386617

D. N. Alleyne and P. Cawley, Optimization of Lamb wave inspection techniques, NDT& E International, vol.25, p.31, 1992.

A. Raghavan and C. E. Cesnik, Finite-dimensional piezoelectric transducer modeling for guided wave based structural health monitoring, Smart materials and structures, vol.14, p.87, 2005.

P. Belanger and G. Boivin, Development of a low frequency omnidirectional piezoelectric shear horizontal wave transducer, Smart Materials and Structures, vol.25, p.32, 2016.

S. Grondel, C. Paget, C. Delebarre, J. Assaad, and K. Levin, Design of optimal configuration for generating A0 Lamb mode in a composite plate using piezoceramic transducers, The Journal of the Acoustical Society of America, vol.112, p.32, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00149900

E. Moulin, J. Assaad, C. Delebarre, and D. Osmont, Modeling of Lamb waves generated by integrated transducers in composite plates using a coupled finite element-normal modes expansion method, The Journal of the Acoustical Society of America, vol.107, p.43, 2000.
URL : https://hal.archives-ouvertes.fr/hal-00159070

P. Y. Moghadam, N. Quaegebeur, and P. Masson, Mode selective generation of guided waves by systematic optimization of the interfacial shear stress profile, Smart Mater. Struct, vol.24, p.32, 2015.

Z. Su and L. Ye, Selective generation of Lamb wave modes and their propagation characteristics in defective composite laminates, Proceedings of the Institution of Mechanical Engineers, Part L : Journal of Materials Design and Applications, vol.218, p.33, 2004.

P. D. Wilcox, Encyclopedia of Structural Health Monitoring, chap. Guided-Wave Array Methods, vol.16, p.33, 2009.

C. C. Fuller, S. Elliott, and P. A. Nelson, Active control of vibration, p.33, 1996.

S. Elliott, Signal processing for active control, ? p. xiv, xxi, vol.33, p.45, 2000.

S. Elliott and P. Nelson, The active control of sound, Electronics & communication engineering journal, vol.2, p.34, 1990.
URL : https://hal.archives-ouvertes.fr/hal-00452716

S. J. Elliott and M. Johnson, Radiation modes and the active control of sound power, The Journal of the Acoustical Society of America, vol.94, p.33, 1993.
URL : https://hal.archives-ouvertes.fr/hal-00452716

M. Baudry, P. Micheau, and A. Berry, Decentralized harmonic active vibration control of a flexible plate using piezoelectric actuator-sensor pairs, The Journal of the Acoustical Society of America, vol.119, p.33, 2006.

N. Quaegebeur, P. Micheau, and A. Berry, Decentralized harmonic control of sound radiation and transmission by a plate using a virtual impedance approach, The Journal of the Acoustical Society of America, vol.125, p.34, 2009.

J. Nocedal and S. Wright, J. Numerical Optimization, p.35, 2006.

J. C. Lagarias, J. A. Reeds, M. H. Wright, and P. E. Wright, Convergence properties of the Nelder-Mead simplex method in low dimensions, SIAM Journal on optimization, vol.9, p.35, 1998.

R. Guitel, N. Quaegebeur, P. Micheau, and P. Masson, Structural health monitoring of composite structures using embedded pzt sensors in space application, CANSMART : International Conference on Smart Materials and Structures / SMN : 5th International Conference on Smart Materials and Nanotechnology in Engineering, p.35, 2015.

P. Micheau, R. Guitel, N. Quaegebeur, and P. Masson, Génération sélective d'ondes guidées à l'aide de transducteurs co-localisés, CFA : Congrès Français d'Acoustique / VISHNO : VIbrations, SHocks and NOise, p.35, 2016.

M. Tanter, J. Thomas, and M. Fink, Time reversal and the inverse filter, The Journal of the Acoustical Society of America, vol.108, p.36, 2000.
URL : https://hal.archives-ouvertes.fr/hal-00113152

M. Tanter, J. Aubry, J. Gerber, J. Thomas, and M. Fink, Optimal focusing by spatio-temporal inverse filter. i. basic principles, The Journal of the Acoustical Society of America, vol.110, p.36, 2001.

N. Mordant, C. Prada, and M. Fink, Highly resolved detection and selective focusing in a waveguide using the dort method, The Journal of the Acoustical Society of America, vol.105, p.36, 1999.

P. Kirrmann, On the completeness of Lamb modes, Journal of elasticity, vol.37, p.43, 1994.

L. Moreau, M. Castaings, B. Hosten, and M. Predoi, An orthogonality relation-based technique for post-processing finite element predictions of waves scattering in solid waveguides, The Journal of the Acoustical Society of America, vol.120, p.43, 2006.

. Ansi/ieee, , p.53, 1988.

, Efunda : the ultimate online reference for engineers, p.54, 2018.

C. Desai, M. Zaman, J. Lightner, and H. Siriwardane, Thin-layer element for interfaces and joints, International Journal for Numerical and Analytical Methods in Geomechanics, vol.8, p.71, 1984.

N. Quaegebeur, P. Ostiguy, and P. Masson, Hybrid empirical/analytical modeling of guided wave generation by circular piezoceramics, Smart Materials and Structures, vol.24, p.71, 2015.

W. Ke, M. Castaings, and C. Bacon, 3D finite element simulations of an air-coupled ultrasonic NDT system, NDT & E International, vol.42, p.71, 2009.

V. Serey, Selective guided waves generation in a bi-dimensional waveguide for damage detection, Proceedings of 11th edition IWSHM : International Workshop on Structural Health Monitoring, p.96, 2017.

B. Hosten, Ultrasonic through-transmission method for measuring the complex stiffness moduli of composite materials, Handbook of Elastic Properties of Solids, Liquids and Gases, p.110, 2001.

H. Chen and S. W. Tsai, Three-dimensional effective moduli of symmetric laminates, Journal of Composite Materials, vol.30, p.111, 1996.

B. Hosten, Stiffness matrix invariants to validate the characterization of composite materials with ultrasonic methods, Ultrasonics, vol.30, p.111, 1992.

C. Kexel, M. Malzer, and J. Moll, Connecting physics to ICT : demonstrating a 'Data Drawbridge' by means of guided ultrasound waves, European Journal of Physics, vol.39, p.154, 2018.

P. Margerit, A. Lebée, J. Caron, K. Ege, and X. Boutillon, Identification haute résolution de nombres d'ondes pour la caractérisation des stratifiés anisotropes, Journées Nationales sur les Composites, p.156, 2017.

. Polytec, Laser Doppler vibrometry, p.159, 2018.

. Polytec, Nature & technology : Vibrations everywhere ! Application Note, p.161, 2006.