R. .. Bibliographique,

, Cas des Engrenages à Voiles-minces

M. S. Abbes, Gearbox vibratory analysis using carrying, coupling and slave substructures, International Journal of Simulation Modelling, vol.4, issue.2, pp.67-75, 2005.

M. S. Abbes, T. Fakhfakh, M. Haddar, and A. Maalej, Effect of transmission error on the dynamic behaviour of gearbox housing, The International Journal of Advanced Manufacturing Technology, vol.34, issue.3-4, pp.211-218, 2007.

M. Abbes, S. Bouaziz, F. Chaari, M. Maatar, and M. Haddar, An acousticstructural interaction modelling for the evaluation of a gearbox-radiated noise, International Journal of Mechanical Sciences, vol.50, pp.569-577, 2008.

V. Abouslieman, . D. Ph, and . Insa-lyon, Comportement dynamique des trains planétaires et épicycloïdaux, conditions de contact instantanées et sous-ensembles flexibles, 2004.

V. Abousleiman and P. Velex, A hybrid 3D finite element/lumped parameter model for quasi-static and dynamic analysis of planetary/epicyclic gear sets, Mechanism and machine theory, vol.41, pp.725-748, 2006.

V. Abousleiman, P. Velex, and S. Becquerellle, Modelling of spur and helical gear planetary drives with flexible gears and planet carriers, Journal of mechanical design, vol.129, issue.1, pp.95-106, 2007.

M. Ajmi and P. Velex, A model for simulating the quasi-static and dynamic behaviour of solid wide-faced spur and helical gears, vol.40, pp.173-190, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00373815

P. Almeida, . Leblanc, F. Thouverez, C. Gilbert, and J. Ousty, Experimental and numerical investigation on a rotating centrifugal compressor, Proceedings of ASME Turbo Expo, 2012.

P. Almeida, Couplage thermomécanique et vibratoire d'un compresseur centrifuge lors d'un contact aube-carter, 2014.

V. K. Ambarisha and R. G. Parker, Nonlinear dynamics of planetary gears using analytical and finite element models, Journal of Sound and Vibration, vol.302, pp.577-595, 2007.

N. Amini, B. G. Rosen, . Rosen, and H. Westberg, Optimization of gear tooth surfaces, International Journal of Machine Tools and Manufacture, vol.38, issue.5-6, pp.425-435, 1998.

M. Ankouni, A. A. Lubrecht, and P. Velex, Numerical simulation of damping in EHL line contacts, vol.2, pp.26-28, 2014.

M. Ankouni, . D. Ph, and . Insa-lyon, Modeling of damping in elastohydrodynamic lubricated contact, application to gear dynamic, 2016.

A. Artoni, M. Gabiccini, M. Guiggiani, and A. Kahraman, Multi-objective ease-off optimization of hypoid gears for their efficiency, noise and durability performances, Journal of Mechanical Design, vol.133, pp.1-9, 2011.

C. J. Bahk and R. G. Parker, Analytical investigation of tooth profile modification effects on planetary gear dynamics, Mechanism and Machine Theory, vol.70, pp.298-319, 2013.

S. Baud and P. Velex, Static and dynamic tooth loading in spur and helical geared systems-experiments and model validation, Journal of Mechanical Design, vol.124, issue.2, pp.334-346, 2002.

B. Belgacem, F. Maday, and Y. , The mortar finite element method for three dimensional finite elements, Mathematical Modelling and Numerical Analysis, vol.31, pp.289-302, 1997.

C. Bernardi, Y. Maday, and A. Patera, A new nonconforming approach to domain decomposition: The mortar element method, pp.13-51, 1994.

M. Bettaieb, . D. Ph, and . Insa-lyon, Modélisation du comportement dynamique d'engrenages, couplages entre engrènements et éléments de structures flexibles, 2006.

M. Bettaieb, P. Velex, and M. Ajmi, A static and dynamic model of geared transmission by combining substructures and elastic foundations -application on thin-rimmed gears, Journal of Mechanical design, vol.129, pp.184-194, 2007.

G. W. Blankenship and A. Kahraman, Steady state forced response of a mechanical oscillator with combined parametric excitation and clearance type non-linearity, Journal of Sound and Vibration, vol.185, issue.5, pp.743-765, 1995.
URL : https://hal.archives-ouvertes.fr/hal-01389915

G. W. Blankenship and A. Kahraman, Gear dynamics experiments, Part I: characterization of forced response, th International Power Transmission and Gearing Conference, vol.88, pp.373-380, 1996.

R. D. Blevins, Formula for natural frequency and mode shape, 1979.

R. Bogacz and S. Noga, Free transverse vibration analysis of a toothed gear, Archives of Applied Mechanics, vol.82, pp.1159-1168, 2012.

G. Bonori, M. Barbieri, and F. Pellicano, Optimum profile modifications of spur gears by means of genetic algorithms, Journal of Sound and Vibration, vol.313, pp.603-616, 2008.

J. Bruyère and P. Velex, Derivation of optimum profile modifications in narrow-faced spur and helical gears using a perturbation method, Journal of Mechanical Design, vol.135, pp.71009-71010, 2013.

J. Bruyère and P. Velex, A simplified multi-objective analysis of optimum profile modification in spur and helical gears, Mechanism and Machine Theory, vol.80, pp.70-83, 2014.

J. Bruyère, X. Gu, and P. Velex, On the analytical definition of profile modifications minimising transmission error variation in narrow-faced spur helical gears, Mechanism and Machine Theory, vol.92, pp.257-272, 2015.

A. Carbonelli, J. Perret-liaudet, E. Rigaud, L. Bot, and A. , Particle swarm optimization as an efficient computational method in order to minimize vibrations of multimesh gears transmission, Advances in Acoustics and Vibration, 2011.

A. Carbonelli, J. Perret-liaudet, E. Rigaud, E. Pelloli, and D. Barday, Robust optimization of a truck timing gear cascade : numerical and experimental results, 2013.

L. Champaney and D. Dureisseix, A mixed domain decomposition approach, Mesh Partitioning Techniques and Domain Decomposition Methods, chapter 12, pp.293-320, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00325949

M. Chapron, P. Velex, and J. Bruyère, Optimization of profile modifications with regards to dynamic tooth loads in single and double-helical planetary gears with flexible ring-gears, Journal of Mechanical Design, vol.138, pp.1-11, 2016.

I. Chowdhury and S. P. Dasgupta, Computation of Rayleigh damping coefficients for large systems, Electronic Journal of Geotechnical Engineering, vol.8, issue.0, 2003.

T. F. Conry and A. Seireg, A mathematical programming method for design of elastic bodies in contact, Journal of Applied Mechanics, vol.38, issue.2, pp.387-392, 1971.

T. F. Conry and A. Seireg, A mathematical programming technique for the evaluation of load distribution and optimal modifications of gear systems, Journal of Engineering and Industry, vol.95, issue.4, pp.1115-1122, 1973.

C. G. Cooley and R. G. Parker, Vibration of high-speed rotating rings coupled to spacefixed stiffnesses, Journal of Sound and Vibration, vol.333, pp.2631-2648, 2014.

C. G. Cooley and R. G. Parker, Limitations of an inextensible model for the vibration of high-speed rotating elastic rings with attached space-fixed discrete stiffnesses, European Journal of Mechanic A/Solids, vol.54, pp.187-197, 2015.

R. R. Craig and M. C. Bampton, Coupling of sub-structures for dynamic analysis, AIAA Journal, vol.6, issue.7, pp.1313-1319, 1968.

G. Dhatt, G. Touzot, and G. Denielou, Une présentation de la méthode des éléments finis, 1981.

H. Ben-dhia and G. Rateau, The Arlequin method as a flexible engineering design tool, International Journal for Numerical Methods in Engineering, vol.62, pp.1442-1462, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00018915

H. Ding and A. Kahraman, Interactions between nonlinear spur gear dynamics and surface wear, Journal of Sound and Vibration, vol.307, issue.3-5, pp.662-679, 2007.

D. Dureisseix, P. Ladevèze, and . B. Schrefler, A LATIN computational strategy for multiphysics problems: Application to poroelasticity, International Journal for Numerical Methods in Engineering, vol.56, issue.10, pp.1489-1510, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00321790

T. Eritenel and R. G. Parker, Three-dimensional nonlinear vibration of gear pairs, Journal of Sound and Vibration, vol.331, issue.15, pp.3628-3648, 2012.

;. T. Eritenel and R. G. Parker, Three-dimensional nonlinear vibration of gear pairs, Journal of Sound and Vibration, vol.331, pp.3628-3648, 2012.

J. V. Field and M. T. Wright, The early history of mathematical gearing, Endeavour, New Series, vol.9, issue.4, pp.160-9327, 1985.

H. Fukuma, T. Furukawa, A. , and T. , Fundamental Research on Gear Noise and Vibration, Bulletin of the JSME, vol.16, pp.1094-1107, 1973.

M. Geradin and N. Kill, A new approach to finite element modelling of flexible rotors, Engineering Computing, vol.1, pp.52-65, 1984.

M. Geraldin and D. Rixen, « Théorie des vibrations, application à la dynamique des structures, Physique Fondamentale et Appliquée, p.421, 1993.

G. Dhafer, B. Jérôme, V. Philippe, O. Michel, and M. Haddar, Robust Optimization of Gear Tooth Modifications Using a Genetic Algorithm, Condition Monitoring of Machinery in Non-Stationary Operations, 2012.

D. Ghribi, J. Bruyère, P. Velex, M. Octrue, and M. Haddar, Multi-objective optimization of gear tooth profile modifications, pp.189-197, 2013.

C. Gosselin, T. Guertin, D. Remond, and Y. Jeans, Simulation and experimental measurement of the transmission error of real hypoid gears under load, Journal of Mechanical Design, vol.122, pp.109-122, 2000.
URL : https://hal.archives-ouvertes.fr/hal-00450325

R. Guilbault, C. Gosseling, and L. Cloutier, Helical gears, effect of tooth deviations and tooth modifications on load sharing and filet stresses, vol.128, pp.444-456, 2006.

B. Guilbert, P. Velex, D. Dureisseix, and P. Cutuli, A mortar-based mesh interface for hybrid finite element/lumped parameter gear dynamic models -Applications to thinrimmed geared systems, Journal of Mechanical Design, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01580069

B. Guilbert, P. Velex, and P. Cutuli, , 2018.

D. Guo, F. L. Chu, and Z. C. Zhieng, The influence of rotation on vibration of a thick cylidrical shell, Journal of sound and vibration, vol.242, pp.487-505, 2001.

Y. Guo, T. Eritenel, T. M. Ericson, and R. G. Parker, Vibro-acoustic propagation of gear dynamics in a gear-bearing-housing system, Journal of Sound and Vibration, vol.333, issue.22, pp.5762-5785, 2014.

S. L. Harris, Dynamic loads on the teeth of spur gears, Proceedings of the Institution of Mechanical Engineers, vol.172, pp.87-112, 1958.

G. H. Heirman, A. Toso, N. Cappellini, and F. P. Van-wermeskerken, A gear contact model to analyse the dynamics of transmissions with lightweight, flexible gears, 2015.

G. Henriot, Traité théorique et pratique des engrenages, p.608, 1978.

G. Henriot, Traité théorique et pratique des engrenages, Tome I : Théorie et technologie". 6ème édition, p.622, 1979.

D. N. Herting, A general purpose, multi-stage component modal synthesis method, Finite elements in analysis and design, vol.1, pp.90025-90028, 1985.
DOI : 10.1016/0168-874x(85)90025-3

M. Hotait and A. Kahraman, Experiments on root stresses of helical gears with lead crown and misalignments, Journal of Mechanical Design, vol.130, issue.074502, pp.1-5, 2008.
DOI : 10.1115/1.2931127

M. A. Hotait and A. Kahraman, Experiments on the relationship between the dynamic transmission error and the dynamic stress factor of spur gear pairs, Mechanism and Machine Theory, vol.70, pp.116-128, 2013.

D. R. Houser, J. Harianto, and D. Talbot, Gear mesh misalignment, Gear Solutions, pp.34-43, 2006.

D. Houser, F. Oswald, and M. Valco, Comparison of transmission error predictions with noise measurements for several spur and helical gears, p.30

, ISO 21771: Gears -Cylindrical involute gears and gear pairs -Concepts and geometry, AIAA/ASME/SAE/ASEE Joint Propulsion Conf., Indianapolis, pp.2007-2016, 1994.

, ISO 6336: Calculation of load capacity of spur and helical gears, 1996.

G. Jacquet-richardet, Bladed Assemblies Vibration, Lecture notes, INSA de Lyon, 1997.

D. Johnson, Excitation of resonant vibrations by gear teeth meshing effects, Proceedings of the International Conference on Gearing, Institution of Mechanical Engineers, pp.18-23, 1958.

A. Kahraman and S. Vijayakar, Effect of internal gear flexibility on the quasi-static behavior of a planetary gear set, Journal of Mechanical Design, vol.123, pp.408-415, 2001.

A. Kahraman, A. A. Kharazi, and M. Umrani, A deformable body dynamic analysis of planetary gears with thin rims, Journal of Sound and Vibration, vol.262, pp.752-768, 2003.

A. Kahraman, H. Ligata, and A. Singh, Influence of ring gear rim thickness on planetary gear set behaviour, Journal of Mechanical Design, vol.132, pp.1-8, 2010.
DOI : 10.1115/1.4000699

A. Kahraman and R. Singh, Non-linear dynamics of a spur gear pair, Journal of Sound and Vibration, vol.142, issue.1, pp.49-75, 1990.

A. Kahraman, H. N. Ozguven, D. R. Houser, and J. Zakrajsek, Dynamic Analysis of Geared Rotors by Finite Elements, Journal of Mechanical Design, vol.114, issue.3, pp.507-514, 1992.

M. Kang, R. Kahraman, and A. , Measurement of vibratory motions of gears supported by compliant shafts, Mechanical Systems and Signal Processing, vol.29, pp.391-403, 2012.

H. Kohler, The mechanism and measurement of dynamic loading in spur gears, 1959.

H. Kohler, A. Pratt, and A. Thompson, Dynamics and Noise of Parallel-axis Gearing, Proceedings of the Institution of Mechanical Engineers, vol.184, pp.111-121, 1970.

A. Kubo, K. Yamada, T. Aida, and S. Sato, Research on ultra high speed gear devices, Bulletin of the JSME, vol.38, pp.2692-2715, 1972.

C. Lacour and Y. Maday, Two different approaches for matching non-conforming grids: The mortar element method and the FETI method, BIT Numerical Mathematics, vol.37, issue.3, pp.720-738, 1997.

M. Lalanne, P. Berthier, and J. Der-hagopian, Mechanical Vibrations for Engineers, 1984.
URL : https://hal.archives-ouvertes.fr/cel-00315803

M. Lalanne, G. Ferraris, and . Rotordynamics, , 1990.

M. J. Lewis, Gearing in the ancient world, Endeavour, New series, vol.17, 1993.

S. Li, Deformation and bending stress analysis of a three-dimensional, thin-rimmed gear, Journal of Mechanical design, vol.124, pp.129-135, 2002.

S. Li, Gear contact model and loaded tooth contact analysis of a three-dimensional thin-rimmed gear, Journal of Mechanical design, vol.124, pp.511-517, 2002.

S. Li, Finite element analyses for contact strength and bending strength for a pair of spur gears with machining errors, assembly errors and tooth modifications, Mechanism and Machine Theory, vol.42, pp.88-114, 2007.

S. Li, Centrifugal load and its effects on bending strength and contact strength of high speed thin-walled spur gear with offset web, Mechanism and Machine Theory, vol.43, pp.217-239, 2008.

S. Li, Experimental investigation and FEM analysis of resonance frequency behaviour of three-dimensional, thin-walled spur gears with power-circulating test rig, Mechanism and Machine Theory, vol.43, pp.934-963, 2008.

S. Li and A. Kahraman, A Method to Derive Friction and Rolling Power Loss Formulae for Mixed Elastohydrodynamic Lubrication, Journal of Advanced Mechanical Design, Systems, and Manufacturing, vol.5, issue.4, pp.252-263, 2011.

S. Li, Effects of centrifugal load on tooth contact stresses and bending stresses of thinrimmed spurs gears and with inclined webs, Mechanism and Machine Theory, vol.59, pp.34-47, 2013.

T. C. Lim and R. Singh, A Review of Gear Housing and Acoustics Literature Dynamics, 1989.

T. Lim and R. Singh, Vibration transmission through rolling element bearings, part ii: system studies, Journal of sound and vibration, vol.139, issue.2, pp.201-225, 1990.

T. Lim and R. Singh, Vibration transmission through rolling element bearings. part iii: Geared rotor system studies, Journal of sound and vibration, vol.151, issue.1, pp.31-54, 1991.

M. Liu and D. G. Gorman, Formulation of Rayleigh damping and its extensions, Computers & Structures, vol.57, issue.2, pp.277-285, 1995.

G. Lundberg, Elastische Berührung zweier Halbraüme, vol.10, pp.201-211, 1939.

M. Maatar and P. Velex, Quasi-static and dynamic analysis of narrow-faced helical gears with profile and lead modifications, Journal of Mechanical Design, vol.119, pp.474-480, 1997.

V. Martin, Elements d'acoustique générale : de quelques lieux communs de l'acoustique à une première maitrise des champs sonores, Presses Polytechniques et Universitaires Romandes, Italie, 2007.

H. Mehdigholi, Forced vibration of a rotating discs and interaction with nonrotating structures, 1991.

A. Mounetou, A. Talon, and C. Colette, Non-intrusive measurement of gear dynamic response, vol.2, pp.1029-1037, 2014.
DOI : 10.1533/9781782421955.1029

R. G. Munro, The D. C. component of gear transmission error, Proc. 1989

, International Power Transmission and gearing conference, pp.467-470, 1989.

R. G. Munro, L. Morrish, and D. Palmer, Gear transmission error outside the normal path of contact due to corner and top contact, Proceedings of the Institution of Mechanical Engineers, vol.213, pp.389-400, 1999.

S. Noga, Transverse vibration of a gear wheel, Scientific Bulletin, XXIII(C), pp.137-142, 2009.

S. Oda and K. Miyachika, Effects of key on bending fatigue breakage of thin-rimmed spur gear, Bulletin of JSME, vol.27, issue.232, pp.2279-2286, 1984.

S. Oda and K. Miyachika, Effects of rim thickness son root stress and bending fatigue strength of internal gear tooth, Bulletin of JSME, vol.27, issue.230, pp.1759-1764, 1984.

S. Oda, T. Koide, and K. Miyachika, Dynamic behaviour of thin-rimmed helical gears with various web arrangements, Bulletin of JSME, vol.28, issue.244, pp.2434-2441, 1985.

S. Oda, K. Miyachika, T. Sayama, T. Koide, and M. Mizune, Stress analysis of thinrimmed spur gears by boundary element method, Bulletin of JSME, vol.29, issue.248, pp.593-599, 1986.

S. Oda, K. Miyachika, and T. Sayama, Effects of rim and web thicknesses on bending fatigue strength of internal gear, Bulletin of JSME, vol.29, issue.248, pp.586-562, 1986.

S. Oda and K. Miyachika, Root stress of thin-rimmed internal spur gear supported with pins, JSME International Journal, vol.30, issue.262, pp.646-652, 1987.

T. Osman and P. Velex, Static and dynamic simulations of mild abrasive wear in widefaced solid spur and helical gears, Mechanism and Machine Theory, vol.45, pp.911-924, 2010.

T. Osman and P. Velex, A model for the simulation of the interactions between dynamic tooth loads and contact fatigue in spur gears, Tribology International, vol.46, pp.84-96, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00567496

H. N. Özgüven and D. R. Houser, Mathematical models used in gear dynamics -a review, Journal of Sound and Vibration, vol.121, issue.3, pp.383-411, 1988.

H. N. Ozgüven and D. R. Houser, Dynamic analysis of high speed gear by using loaded static transmission error, Journal of Sound and Vibration, vol.125, issue.1, pp.71-83, 1988.

R. G. Parker, S. M. Vijayakar, and T. Imajo, Non-linear dynamic response of a spur gear pair: modelling and experimental comparisons, Journal of Sound and Vibration, vol.237, issue.3, pp.435-455, 2000.

R. G. Parker, V. Agashe, and S. M. Vijayakar, Dynamic response of a planetary gear system using a finite element/contact mechanics model, Journal of Mechanical Design, vol.122, pp.304-310, 2000.

L. Pust and L. Pesek, Vibration of imperfect rotating disk, Applied and Computational Mechanics, vol.5, pp.206-216, 2011.

D. Remond, Practical performances of high-speed measurement of gear transmission error or torsional vibrations with optical encoders, Measurement in Science and Technology, vol.9, pp.347-353, 1998.
URL : https://hal.archives-ouvertes.fr/hal-00692560

E. Rigaud and J. Sabot, Effect of elasticity of shafts, bearings, casing and couplings on the critical rotational speeds of a gearbox, VDI Berichte, pp.833-845, 1996.
URL : https://hal.archives-ouvertes.fr/hal-00122584

E. Rigaud and D. Barday, Modelling and analysis of static transmission error -effect of wheel body deformation and interaction between adjacent loaded teeth, pp.1961-1972, 1999.

P. Sainsot, P. Velex, and O. Duverger, Contribution of gear body to tooth deflections-A new bidimensional analytical formula, Journal of Mechanical Design, vol.126, issue.4, pp.748-752, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00450552

A. F. El-sayed, Aircraft propulsion and gas turbine engines, pp.978-978, 2008.

P. Schmiechen, Travelling Wave Speed Coincidence, 1997.

A. Singh, A. Kahraman, and H. Ligata, Internal gear strains and load sharing in planetary transmissions: model and experiments, Journal of Mechanical Design, vol.130, pp.1-10, 2008.

N. Sainte-marie, P. Velex, G. Roulois, and J. Caillet, A study on the correlation between dynamic transmission error and dynamic tooth loads in spur and helical gears, Journal of Vibration and Acoutics, vol.139, pp.1-10, 2017.

T. Suzuki, K. Umezawa, H. Houjoh, and K. Bagiasna, Influence of misalignment on vibration of helical gears, vol.52, pp.1595-1600, 1986.

V. K. Tamminana, A. Kahraman, and S. Vijayakar, A study of the relationship between the dynamic factors and the dynamic transmission error of spur gear pairs, Journal of Mechanical Design, vol.129, pp.75-84, 2007.

M. S. Tavakoli and D. R. Houser, Optimum profile modification for the minimization of static transmission errors of spur gears, Journal of Mechanisms, Transmissions, and Automation in Design, vol.108, issue.1, pp.86-94, 1986.

S. Timoshenko, Strength of materials, Part I. Elementary theory and problems, p.442, 1955.

D. H. Tran, Réduction de modèle en dynamique des structures et des systèmes couplés aéroélastiques, HDR, 2015.

W. A. Tuplin, Gear tooth stresses at high speed, Proceedings of the Institution of Mechanical Engineers, vol.16, pp.162-167, 1950.

A. Ueda, A. Kubo, H. Matsuoka, J. Watanabe, and M. Miyazaki, Explores for the origin of gears in traditional Japanese clock (Wadokei), JSME International Conference on Motion and Power Transmission, 2017.

K. Umezawa, T. Suzuki, H. Houjoh, and T. Sato, Vibration of power transmission helical gears : (the effect of contact ratio on the vibration), JSME, pp.238-256, 1985.

P. Velex, A. , and M. , On the modelling of excitations in geared systems by transmission errors, Journal of Sound and Vibration, vol.290, pp.882-909, 2006.

P. Velex, A. , and M. , Dynamic tooth loads and quasi-static transmission errors in helical gears -Approximate dynamic factor formulae, Mechanism and Machine Theory, vol.42, pp.1512-1526, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00378143

P. Velex, On the relationship between gear dynamics and transmission errors, Proceedings of MPT2009-Sendai, Matsushima Isles Resort, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00504017

P. Velex, J. Bruyère, and D. R. Houser, Some analytical results on transmission errors in narrow-faced spur and helical gears: Influence of profile modifications, Journal of Mechanical Design, vol.133, pp.1-11, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00622524

P. Velex, M. Chapron, H. Fakhfakh, J. Bruyère, and S. Becquerelle, On transmission errors and profile modifications minimising dynamic tooth load in mutli-mesh gears, Journal of Sound and Vibration, vol.379, pp.28-52, 2016.

P. Velex, Contribution à l'analyse du comportement dynamique de réducteurs à engrenages à axes parallèles, 1988.

P. Velex and D. Berthe, Dynamic tooth load on geared train, Proceedings of the 1989 International Power Transmission and Gearing Conference, vol.1, pp.447-454, 1989.

P. Velex and M. Maatar, A mathematical model for analysing the influence of shape deviation and mounting errors on gear behaviour, Journal of sound and vibration, vol.191, pp.629-660, 1996.

K. Wang, Thermal elastohydrodynamic lubrication of spur gears, 1980.

C. Weber, The deformations of loaded gears and the effects on their load carrying capacity, British Dept. of Scientific and Industrial Research, issue.3, 1949.

C. Weber and K. Banaschek, Formänderung und Profilrücknahme bei Gerad-und Schrägverzahnten Antriebstechnik, p.11, 1953.

J. Wei, W. Sun, and L. Wang, Effect of flank deviation on load distributions for helical gear, Journal of Mechanical Science and Technology, vol.25, issue.7, pp.1781-1789, 2011.

J. A. Wensing, On the dynamic of ball bearings, 1998.

B. Wood, Sources of vibration excitation in spur gears, 1959.

J. Zhou, W. Sun, and Q. Tao, Gearbox Low-Noise Design Method Based on Panel Acoustic Contribution, pp.1-10, 2004.

, Each element is composed of two nodes (Figure 1) with 6 degrees-of-freedom each, Shaft Element -Beam Matrices The beam elements rely on Timoshenko beam theory [TIM55

, Ainsi, les effets transmis d'un train à l'autre : couplage de modes etc? seraient potentiellement visibles

L. Enfin and . Paliers, Les carters nécessitant aussi des masses très faibles, leur conception engendre les mêmes problèmes que pour les roues d'engrenage. Leurs modes pourraient être excités par l'engrènement et leur modèle pourrait être précisé

B. Velex, P. Dureisseix, D. Cutuli, P. ;. Velex, P. Cutuli et al., A mortar-based mesh interface for hybrid finite element/lumped parameter gear dynamic models -Applications to thin-rimmed geared systems, INSA Lyon, tous droits réservés Scientific Contributions Journal Publications Guilbert, vol.138, pp.623-633, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01580069

B. Guilbert, P. Velex, and P. Cutuli, Optimum profile relief in thin-rimmed spur and helical gear, International Conference on Power Transmissions, vol.1, pp.425-430, 2016.
URL : https://hal.archives-ouvertes.fr/hal-02129641

B. Guilbert, P. Velex, D. Dureisseix, and P. Cutuli, « Un modèle hybride du comportement statique et dynamique d'engrenages. Application aux systèmes avec voilesminces, Journées Transmissions Mécaniques, pp.11-15, 2016.