M. D. Abouzahra and L. Lewin, Radiation from microstrip discontinuities, IEEE Trans. Microw. Theory Tech, issue.8, pp.722-723, 1979.
DOI : 10.1109/tmtt.1979.1129713
URL : https://scholar.colorado.edu/cgi/viewcontent.cgi?article=1057&context=elmimi

H. F. Abutarboush and A. Shamim, Paper-Based Inkjet-Printed TriBand U-Slot Monopole Antenna for Wireless Applications, IEEE Antennas and Wireless Propagation Letters, vol.11, pp.52-56, 2012.
DOI : 10.1109/lawp.2012.2223751

H. F. Abutarboush, M. F. Farooqui, A. Shamim, ;. Alimenti, F. Alimenti et al., Crossed dipole frequency doubling RFID TAG based on paper substrate and ink-jet printing technology, IEEE Antennas and Wireless Propagation Letters, vol.15, pp.840-842, 2010.

F. Alimenti, G. Orecchini, M. Virili, V. Palazzari, P. Mezzanotte et al., Design of paper-substrate dipole antennas magnetically coupled to UHF RFID silicon chips, 2011 IEEE International Conference on RFID-Technologies and Applications, pp.219-222, 2011.
DOI : 10.1109/rfid-ta.2011.6068641

F. Alimenti, P. Mezzanotte, M. Dionigi, M. Virili, and L. Roselli, Microwave Circuits in Paper Substrates Exploiting Conductive Adhesive Tapes, IEEE Microwave and Wireless Components Letters, vol.22, issue.12, pp.660-662, 2012.
DOI : 10.1109/lmwc.2012.2227141

F. Alimenti, V. Palazzari, C. Mariotti, M. Virili, G. Orecchini et al., 24-GHz CW radar front-ends on cellulose-based substrates: A new technology for low-cost applications, 2015 IEEE MTT-S International Microwave Symposium, pp.1-4, 2015.

Y. Amin, Q. Chen, L. Zheng, H. Tenhunen, ;. Amin et al., Performance-optimized quadrate bowtie RFID antennas for cost-effective and eco-friendly industrial applications, Progress In Electromagnetics Research, vol.130, issue.11, pp.558-564, 2010.
DOI : 10.2528/pier12020805
URL : http://www.jpier.org/PIER/pier126/03.12020805.pdf

S. Ayman, V. A. Al-zayed, ;. S. Shameena, M. M. Bhattacharya, L. Tentzeris et al., Planar Dual-Band Monopole Antenna with an Extended Ground Plane for WLAN Applications, Polytronic 2007-6th International Conference on Polymers and Adhesives in Microelectronics and Photonics, vol.2016, pp.159-166, 2007.

A. Bisognin, C. Luxey, G. Jacquemod, F. Ferrero, D. Titz et al., Antenna on PEN substrate for millimeter-wave applications, 2013 IEEE Antennas and Propagation Society International Symposium (APSURSI), pp.684-685, 2013.
DOI : 10.1109/aps.2013.6711002
URL : https://hal.archives-ouvertes.fr/hal-00854756

J. Carroll, M. Li, K. Chang, ;. Kuo, H. Chuang et al., Inkjet Printing of Novel Wideband and High Gain Antennas on Low-Cost Paper Substrate, Journal of Electromagnetic Waves and Applications, vol.43, issue.1, pp.4148-4156, 1995.

M. Tentzeris, Inkjet catalyst printing and electroless copper deposition for low-cost patterned microwave passive devices on paper, Electronic Materials Letters, vol.9, issue.5, pp.669-676, 2013.

J. R. Cooper and M. M. Tentzeris, Novel "smart cube" wireless sensors with embedded processing/communication/power core for "smart skins" applications, IEEE Sensors, pp.1-4, 2012.
DOI : 10.1109/icsens.2012.6411499

C. Jean-philippe, C. Zied, H. Jeremie, and P. Christian, , 2012.

D. Nothern, Emerging Plastic Films for Flexible Electronics Substrates, MSE, vol.542, 2007.

A. Denneulin, J. Bras, A. Blayo, and C. Neuman, Substrate pre-treatment of flexible material for printed electronics with carbon nanotube based ink, Applied Surface Science, vol.257, pp.3645-3651, 2011.

D. L. Tong, A. A. Manga, P. Minard, A. Delattre, L. Crowtheralwyn et al., Comparative study of WLAN dual-band monopole antennas printed and etched on paper and PET substrates, pp.1243-1246, 2016.

T. Elsherbeni, K. Elmahgoub, L. Sydänheimo, L. Ukkonen, A. Elsherbeni et al., Laboratory scale fabrication techniques for passive UHF RFID tags, 2010 IEEE Antennas and Propagation Society International Symposium, pp.1-4, 2010.
DOI : 10.1109/aps.2010.5562276

M. F. Farooqui, C. Claudel, and A. Shamim, An Inkjet-Printed Buoyant 3-D Lagrangian Sensor for Real-Time Flood Monitoring, IEEE Transactions on Antennas and Propagation, vol.62, pp.3354-3359, 2014.

, Datasheet of FH34 family's connector provided by Hirose

R. Gonçalves, A. Duarte, R. Magueta, N. B. Carvalho, and P. Pinho, RFID tags on paper substrate for bottle labelling, High Speed Connector EM Simulation of FH34SRJ Series, vol.17, pp.65-72, 2014.

R. Gonçalves, N. B. Carvalho, R. Magueta, A. Duarte, and P. Pinho, UHF RFID tag antenna for bottle labeling, 2014 IEEE Antennas and Propagation Society International Symposium (APSURSI), pp.1520-1521, 2014.

B. Göttel, S. Beer, H. Gulan, and T. Zwick, Ultra broadband millimeterwave antenna fabricated on flexible substrate, 2013 IEEE Antennas and Propagation Society International Symposium (APSURSI), vol.44, p.159, 1975.

H. Nguyen, J. Coupez, V. Castel, C. Person, A. Delattre et al., RF Characterization of Flexible Substrates for New Conformable Antenna Systems, pp.1-5, 2016.

C. Wang,

J. Ke,

L. Chang, RF bandpass filter on flexible substrate fabricated with inkjet printing technology

H. Y. Chien, C. Y. Sim, and C. H. Lee, Compact size dual-band antenna printed on flexible substrate for WLAN operation, 2012 International Symposium on Antennas and Propagation (ISAP), pp.1047-1050, 2012.

M. D. Janezic and J. B. Jarvis, Full-Wave Analysis of a Split-Cylinder Resonator for Nondestructive Permittivity Measurements, IEEE T-MTT, vol.47, pp.2014-2020, 1999.

J. R. Panda, A. S. Saladi, and R. S. Kshetrimayum, A compact printed monopole antenna for dual-band RFID and WLAN applications, pp.464-467, 2011.

G. Kent, An evanescent-mode tester for ceramic dielectric substrates, IEEE Trans. Microwave Theory & Tech, vol.36, issue.10, pp.1451-1454, 1998.

S. Kim, A. Traille, H. Lee, H. Aubert, K. Yoshihiro et al., Inkjet-printed sensors on paper substrate for agricultural applications, pp.866-869, 2013.

I. Kharrat, G. Eymin-petot, J. M. Tourtollet, P. Duchamp, P. Benech et al., Design and realization of printed on paper antennas, p.7, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00994555

, European Conference on Antennas and Propagation (EuCAP), pp.3199-3202, 2013.

I. Kharrat, P. Xavier, T. Vuong, and J. Duchamp, , 2014.

T. Eymin-petot, 3D compact rectenna for anti-counterfeiting application, pp.664-667, 2014.
URL : https://hal.archives-ouvertes.fr/hal-02010132

I. Kharrat, P. Xavier, T. P. Vuong, J. M. Duchamp, P. Benech et al., , 2015.

T. Eymin-petot, Low-Loss Paper Substrate for Printed High Efficiency Antennas at

. Ghz, IEEE Antennas and Wireless Propagation Letters, vol.14, pp.1400-1403, 2015.

Z. Konstas, A. Rida, R. Vyas, K. Katsibas, N. Uzunoglu et al., A novel "Green" inkjet-printed Z-shaped monopole antenna for RFID applications, 3rd European Conference on Antennas and Propagation, pp.2340-2343, 2009.

M. H. Kutner, C. J. Nachtsheim, J. Neter, and W. Li, Applied Linear Statistical Models, 2005.

K. Latti, J. Heinola, M. Kettunen, J. Strom, and P. Silventoinen, A Review of Microstrip T-resonator Method in Determination of Dielectric Properties of Printed Circuit Board Materials, US Patent. [Latti, pp.62-66, 1998.

K. P. Latti, M. Kettunen, J. P. Strom, and P. Silventoinen, A Review, 2007.

T. Microstrip, Resonator Method in Determining the Dielectric Properties of Printed Circuit Board Materials, IEEE Transactions on Instrumentation and Measurement, vol.56, issue.5, pp.1845-1850, 2007.

S. Li, C. Akyel, and R. G. Bosisio, Precise Calculations and Measurements on the References 160, 1981.

X. Liu, S. V. Yao, B. S. Georgakopoulos, M. M. Cook, and . Tentzeris, Reconfigurable helical antenna based on an origami structure for wireless communication system, 2014 IEEE MTT-S International Microwave Symposium (IMS2014), pp.1-4, 2014.

F. Lolli, M. Virili, G. Orecchini, M. Dionigi, F. Alimenti et al., Electromagnetic Characterization of Paper-Glue Compound for System-in-Package on Paper (SiPoP) Future Developments, Proc. Instrumentation and Measurement Technology Conf, vol.22, pp.1-3, 2007.

C. Mariotti, F. Alimenti, P. Mezzanotte, M. Dionigi, M. Virili et al., Modeling and characterization of copper tape microstrips on paper substrate and application to 24 GHz branch-line couplers, pp.794-797, 2013.

S. Merilampi, L. Ukkonen, L. Sydänheimo, P. Ruuskanen, and M. , , 2007.

;. S. Kivikoski, T. Merilampi, P. Laine-ma, and . Ruuskanen, The characterization of electrically conductive silver ink patterns on flexible substrates, Analysis of Silver Ink Bow-Tie RFID Tag Antennas Printed on Paper Substrates, vol.49, pp.782-790, 2007.

G. Monti, L. Catarinucci, C. Vasanelli, and L. Tarricone, 3D patch antenna using a cardbord substrate for RFID reader applications, pp.884-887, 2012.

S. P. Morgan, ;. Moro, M. Bozzi, S. Kim, and M. M. Tentzeris, Novel inkjet-printed substrate integrated waveguide (SIW) structures on low-cost materials for wearable applications, J. Appl. Phys, vol.20, issue.4, pp.72-75, 1949.

R. Moro, S. Kim, M. Bozzi, and M. M. Tentzeris, Inkjet-printed paper-based substrate-integrated waveguide (SIW) components and antennas, International Journal of Microwave and Wireless Technologies, pp.197-204, 2013.

G. Orecchini, L. Yang, M. M. Tentzeris, and L. Roselli, High directivity passive UHF RFID tag with dual-radiating-body antenna, 2010 IEEE Antennas and Propagation Society International Symposium, pp.1-4, 2010.

G. Orecchini, F. Alimenti, V. Palazzari, A. Rida, M. M. Tentzeris et al.,

. Roselli, Design and fabrication of ultra-low cost radio frequency identification antennas and tags exploiting paper substrates and inkjet printing technology, IET Microwaves, Antennas & Propagation, vol.5, pp.993-1001, 2011.

G. Orecchini, . Tentzeris, ?. Yang, and . Roselli, Smart Shoe": An autonomous inkjet-printed RFID system scavenging walking energy, 2011 IEEE International Symposium on Antennas and Propagation (APSURSI), pp.1417-1420, 2011.

L. J. Van-der-pauw, The radiation of electromagnetic power by microstrip configurations, IEEE Trans. Microw. Theory Tech, issue.9, pp.719-725, 1977.

H. P. Phan, T. P. Vuong, P. Benech, P. Xavier, P. Borel et al., Printed flexible wideband microstrip antenna for wireless applications, 2016 International Conference on Advanced Technologies for Communications (ATC), pp.384-387, 2016.
URL : https://hal.archives-ouvertes.fr/hal-02010119

A. Polyakov, T. Grob, R. A. Hovenkamp, H. J. Kettelarij, I. Eidner et al., Comparison of via-fabrication techniques for through-wafer electrical interconnect applications, Proceedings. 54th Electronic Components and Technology Conference, pp.1466-1470, 2004.

C. Ramade, S. Silvestre, F. Pascal-delannoy, and B. Sorli, Thin film HF RFID tag deposited on paper by thermal evaporation, Microstrip Flexible Printed Wiring Board Interconnect Line, vol.4, pp.49-66, 1997.
URL : https://hal.archives-ouvertes.fr/hal-01627638

A. Rathore, R. Nilavalan, H. F. Abutarboush, and T. Peter, Compact dualband (2.4/5.2GHz) monopole antenna for WLAN applications, 2010 International Workshop on Antenna Technology (iWAT), pp.1-4, 2010.

C. H. Riedell, M. Kay, R. Pomerleau, M. Steer, J. Kasten et al., Dielectric Characterization of Printed Circuit Substrates, IEEE Proceedings-1989, pp.102-106, 1989.
DOI : 10.1109/secon.1989.132319

A. Rida, R. Vyas, L. Yang, C. Kruesi, and M. M. Tentzeris, Low Cost Inkjetprinting Paper-Based Modules for RFID Sensing and Wireless Applications, p.38, 2008.
DOI : 10.1109/eumc.2008.4751806

;. H. European-microwave-conference, L. Saghlatoon, L. Sydänheimo, M. Ukkonen, and . Tentzeris, Optimization of Inkjet Printing of Patch Antennas on Low-Cost Fibrous Substrates, IEEE Antennas and Wireless Propagation Letters, vol.13, pp.915-918, 2008.

G. Shaker, M. Tentzeris, and S. Safavi-naeini, Low-cost antennas for mmWave sensing applications using inkjet printing of silver nano-particles on liquid crystal polymers, 2010 IEEE Antennas and Propagation Society International Symposium, pp.1-4, 2010.

G. Shaker, S. Safavi-naeini, N. Sangary, and M. M. Tentzeris, Inkjet Printing of Ultrawideband (UWB) Antennas on Paper-Based Substrates, IEEE Antennas and Wireless Propagation Letters, vol.10, pp.1421-1444, 1969.

F. M. Smits, Measurement of sheet resistivities with the four-point probe, The Bell System Technical Journal, vol.37, pp.711-718, 1958.

M. M. Tentzeris, A. Traille, H. Lee, A. Rida, V. Lakafosis et al., Inkjet-printed paper/polymer-based "green" RFID and Wireless Sensor Nodes: The final step to bridge cognitive intelligence nanotechnology and RF?, IEEE Sensors, pp.1273-1276, 2010.
DOI : 10.1109/ursigass.2011.6050690

M. M. Tentzeris, R. Vyas, V. Lakafosis, A. Traille, H. Lee et al., Inkjet-printed RFIDs for wireless sensing and anti-counterfeiting, 2012 6th European Conference on Antennas and Propagation (EUCAP), pp.3481-3482, 2012.
DOI : 10.1109/eucap.2012.6206654

M. M. Tentzeris, R. Vyas, V. Lakafosis, T. Le, A. Rida et al., Conformal 2D/3D wireless modules utilizing inkjet printing and nanotechnology, Microwave Journal, vol.55, issue.2, 2012.

D. Tobjörk and R. Österbacka, Paper electronics, Advanced Materials, vol.23, pp.1935-1961, 2011.

A. Traille, L. Yang, A. Rida, V. Lakafossis, and M. M. Tentzeris, Novel miniaturized antennas for RFID-enabled sensors, IEEE Sensors, pp.912-915, 2009.
DOI : 10.1109/icsens.2009.5398162

A. Traille, A. Coustou, H. Aubert, S. Kim, and M. M. Tentzeris, Technology for fully printable and rollable ground penetrating radar (GPR) systems, 2014 IEEE Antennas and Propagation Society International Symposium (APSURSI), pp.334-335, 2014.
DOI : 10.1109/aps.2014.6904499

A. Vena, E. Perret, S. Tedjini, G. Eymin-petot, A. Tourtollet et al., Design of Chipless RFID Tags Printed on Paper by Flexography, GRETA approach towards new green material technologies, vol.61, pp.9-15, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01023150

R. Vyas, A. Rida, L. Yang, and M. M. Tentzeris, Design and Development of a Novel Paper-based Inkjet-Printed RFID-Enabled UHF (433.9 MHz) Sensor Node, AsiaPacific Microwave Conference, pp.1-4, 2007.
DOI : 10.1109/apmc.2007.4554641
URL : http://users.ece.gatech.edu/~etentze/APMC07_Vyas_Final.pdf

R. Vyas, A. Rida, L. Yang, and M. M. Tentzeris, Design, integration and characterization of a novel paper-based wireless sensor module, IEEE MTT-S International Microwave Symposium Digest, pp.1305-1308, 2008.

R. Vyas, V. Lakafosis, A. Rida, N. Chaisilwattana, S. Travis et al., Paper-Based RFID-Enabled Wireless Platforms for Sensing Applications, IEEE Transactions on Microwave Theory and Techniques, vol.57, pp.1370-1382, 2009.
DOI : 10.1109/tmtt.2009.2017317

Y. Kuo and K. Wong, Printed double-T monopole antenna for 2.4/5.2 GHz dual-band WLAN operations, Walki-4E technology: a new, sustainable way of producing RFID antennas, vol.51, pp.2187-2192, 2003.

S. Yao, X. Liu, S. V. Georgakopoulos, and M. M. Tentzeris, A novel tunable origami accordion antenna, 2014 IEEE Antennas and Propagation Society International Symposium (APSURSI), pp.370-371, 2014.
DOI : 10.1109/aps.2014.6904517

S. Yao, X. Liu, S. V. Georgakopoulos, and M. M. Tentzeris, A novel reconfigurable origami spring antenna, 2014 IEEE Antennas and Propagation Society International Symposium (APSURSI), pp.374-375, 2014.
DOI : 10.1109/aps.2014.6904519

L. Yang, A. Rida, R. Vyas, M. M. Tentzeris, ;. L. Yang et al., Design and characterization of novel paperbased inkjet-printed RFID and microwave structures for telecommunication and sensing applications, 2016 IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes for RF and THz Applications (IMWS-AMP), vol.55, pp.1-4, 2007.

G. Zou, H. Gronqvist, P. Starski, and J. Liu, Characterization of liquid crystal polymer for high frequency system-in-a-package applications, IEEE Trans. Adv. Packag, vol.25, issue.4, pp.503-508, 2002.

H. Nguyen, J. Coupez, V. Castel, C. Person, A. Delattre et al., RF Characterization of Flexible Substrates for New Conformable Antenna Systems, pp.1-5, 2016.

H. Nguyen, J. Coupez, V. Castel, C. Person, A. Delattre et al., Monopôle Wifi bi-bande sur substrat papier pour l'intégration de systèmes antennaires conformables, faible coût, 20èmes Journées Nationales Micro-Ondes (JNM), pp.16-19, 2017.

. Ch, . Person, J. Nguyen, . Ph, . Coupez et al., Implementing Wideband Monopole/Dipole Antennas on Paper Substrates, 2018.

. Ch, . Person, J. Nguyen, . Ph, . Coupez et al., Characterization of Flex to Printed Circuit Board Interconnections using Insertion Connectors, 2018.