C. Buttay, Modules et boîtiers de puissance (packaging), 2010.

K. Schutte, IGBT modules with internal inductance

Z. Khatir, Failure mechanisms, ECPE, 2011.

M. Bouarroudj-berkani and L. Dupont, Fatigue des composants électroniques de puissance Physique de défaillance, Techniques de l'ingénieur vol. base documentaire : TIB245DUO, Référence D3126, 2010.

M. , Test method standard Microcircuits

W. Sheng and R. Colino, Power Electronics Modules, vol.296, 2005.

E. Du-tremolet-de-la-lacheisserie, Magnétisme : matériaux et applications, 2000.

G. Béranger, J. F. Tiers, and F. Duffaut, Invar-Famille d'alliages fonctionnels, Techniques de l'ingénieur, 2009.

L. Ménager, B. Allard, and E. V. Bley, Conditionnement des modules de puissance, 2010.

D. Dieumegard and G. L. Cloarec, Méthodes d'assemblage pour tubes et dispositifs hyperfréquences, 2004.

M. A. Occhionero, R. A. Hay, R. W. Adams, and K. P. Fennessy, Cost-effective manufacturing of aluminium silicon carbide (AlSiC) electronic packages, Advanced Packaging Materials: Processes, Properties and Interfaces, Proceedings. International Symposium on, pp.118-124, 1999.
DOI : 10.1109/isapm.1999.757298

T. Schubert, L. Ciupinski, W. Zielinski, A. Michalski, T. Weißgärber et al., Interfacial characterization of Cu/diamond composites prepared by powder metallurgy for heat sink applications, Scripta Materialia, vol.58, issue.8, pp.263-266, 2008.
DOI : 10.1016/j.scriptamat.2007.10.011

S. Li and C. Chao, Effects of carbon fiber/Al interface on mechanical properties of carbon-fiber-reinforced aluminum-matrix composites, Metallurgical and Materials Transactions A, vol.35, issue.7, pp.2153-2160, 2004.

M. A. Occhionero, What is AlSiC, 2010.

O. Petitjean, Etude des filières technologiques d'interconnexion entre puces et cartes électroniques et de leur coût de fabrication, 1997.

J. M. Haussonne, Céramiques et verres: principes et techniques d'élaboration, Presses Polytechniques et Universitaires Romandes, 815 p, 2005.

, Curamik power substrates datasheet

U. Voeller and B. Lehmeier, Silicon Nitride Substrates for Power Electronics, 2012.

B. Mouawad, Assemblages innovants en électronique de puissance utilisant la technique de "Spark Plasma Sintering, Thèse INSA Lyon, vol.168, 2013.

H. Pastor, Métallurgie et recyclage du tungstène, Techniques de l'ingénieur Métallurgie extractive et recyclage des métaux de transition, vol.369, 2000.

M. Massénat, Circuits en couches minces-MCM et techniques connexes, 2003.

L. Hattali, Caractérisation et modélisation thermo-mécaniques des assemblages métalcéramique élaborés par thermocompression, Génie Des Matériaux, vol.212, 2009.

C. Duchesne, Contribution a l'étude de la gradation de potentiel dans les modules de puissance haute tension, 2009.

J. W. Lee, I. Radu, and M. Alexe, Oxidation behavior of AlN substrate at low temperature, Journal of materials science : materials in electronics, vol.13, pp.131-137, 2002.

J. Schulz-harder, Advantages and new development of direct bonded copper substrates, Microelectronics reliability, vol.43, pp.359-365, 2003.

B. Mbongo, Liaison métal-céramique par thermocompression. Infuence de l'état initial des matériaux et de la pression partielle d'oxygène, 1994.

N. Nomura, S. Iwamoto, and E. I. Tanaka, Nanostructure of wetting triple line in a Ag-CuTi/Si3N4 reactive system, Acta Materialia, vol.47, issue.2, pp.407-413, 1999.

E. Bastow, Intermetallics in soldering, 2011.

Y. Taehoon, K. Yunsung, K. Jina, L. Jaehong, J. Byungwook et al., Predicting the Drop Performance of Solder Joints by Evaluating the Elastic Strain Energy from High-Speed Ball Pull Tests, Journal of electronic materials, vol.38, 2009.

A. Masson, Mise en oeuvre de techniques d'attaches de puces alternatives aux brasures pour des applications haute température, 2012.

N. C. Lee, Reflow soldering process, vol.269, 2001.

L. Lacourcelle, Nickelage, Techniques de l'ingénieur Ref m1565, 1979.

P. Benaben and F. Durut, Techniques de l'ingénieur Traitements de surface des métaux en milieu aqueux, 2003.

T. Watanabe, Nano-plating-Microstructure control therory of plated film and data base of plated film microstructure, 2004.

F. Robin, P. Bottari, and R. Parkinson, Dépôts de nickel chimique Obtention et propriétés", Techniques de l'ingénieur Traitements de surface des métaux en milieu aqueux, 2004.

M. Masséna, Circuits en couches minces, Couches minces traditionnelles, 2003.

C. C. Lee, P. J. Wang, and J. S. Kim, Are Intermetallics in Solder Joints Really Brittle?, Electronic Components and technology Conference, pp.569-5503, 2007.
DOI : 10.1109/ectc.2007.373866

C. E. Ho, R. Zheng, G. L. Luo, A. H. Lin, and C. R. Kao, Formation and resettlement of (AuxNi1-x)Sn4 in solder joints of ball-grid-array packages with the Au/Ni surface finish, Journal of Electronic Materials, vol.29, pp.1175-1181, 2000.

J. Pan, J. Silk, M. Powers, and P. Hyland, Effect of Gold Content on the Reliability of SnAgCu Solder Joints, 2011.

J. A. Davis, M. J. Bozack, and J. L. Evans, Effect of (Au, Ni)Sn4 Evolution on Sn37Pb/ENIG Solder Joint Reliability Under Isothermal and Temperature-Cycled Conditions, Components and Packaging Technologies, vol.30, pp.32-41, 2007.

K. J. Puttlitz and K. A. Stalter, Handbook of Lead-Free Solder Technology for Microelectronic Assemblies, 2004.

P. Guiraldenq, Diffusion dans les métaux, Techniques de l'ingénieur Étude des métaux et des alliages : état métallique, base documentaire : TIB345DUO, Référence M55, 1994.

M. J. Hermans and M. H. Biglari, Void formation by Kirkendall effect in solder joints, 2006.

, Alloy Phase diagrams, vol.3, p.p, 1741.

J. C. Hwang, J. D. Pan, and R. W. Balluffi, Measurement of grain-boundary diffusion at low temperature by the surface accumulation method. II. Results for gold-silver system, Journal of Applied Physics, vol.50, issue.3, 1979.

R. O. Meyer, Pressure and Vacancy-Flow Effects on the Kirkendall Shift in Silver-Gold Alloys, 1969.

H. Xu, C. Liu, V. Silverschmidt, S. Pramana, T. White et al., Intermetallic phase transformations in Au-Al wire bonds, Intermettalics, vol.19, pp.1808-1816, 2011.

A. Gourgues-lorenzon, Durcissement et renforcement des matériaux

A. F. Gourgues-lorenzon and J. M. Haudin, Matériaux pour l'ingénieur, p.2911762681, 2006.

J. Bonnet and D. Bernache-assollant, Frittage : aspects physico-chimiques Partie 1 : frittage en phase solide, p.106, 2005.
URL : https://hal.archives-ouvertes.fr/emse-00497555

D. Gendron, Etude numérique et expérimentale du frittage à l'échelle du grain, 2001.

G. Bai, Low-Temperature Sintering of Nanoscale Silver Paste for Semiconductor Device Interconnection, 2005.

. Henkel, Customer data package SSP 2020

/. 0060d5fe/$file and . Pdf,

. Heraeus, Customer data package-LTS 117-02P2

A. Argomax, Customer data package

J. F. Göbl, Low temperature sinter technology Die attachement for power electronic applications, CIPS, pp.16-18, 2010.

C. S. Göbl, Vorrichtung und getaktetes Verfahren zur Drucksinterverbindung

A. S. Kähler, A. Waag, E. Peiner, S. Jung, and T. Kruspe, Sinter-Attach of Peltier Dice for Cooling of Deep-Drilling Electronics, Instrumentation and Measurement Technology Conference (I2MTC), pp.13-16, 2012.

N. Heuck, A. Langer, A. Stranz, G. Palm, R. Sittig et al., Analysis and Modeling of Thermomechanically Improved Silver-Sintered Die-Attach Layers Modified by Additives, Components, Packaging and Manufacturing Technology, vol.1, pp.1846-1855, 2011.

N. H. Julian-kähler, A. Wagner, A. Stranz, E. Peiner, A. Et et al., Sintering of Copper Particles for Die Attach, Components, Packaging and Manufacturing Technology, vol.2, 2012.

D. Wakuda, K. Keun-soo, and E. K. Suganuma, Room-Temperature Sintering Process of Ag Nanoparticle Paste, Components and Packaging Technologies, vol.32, pp.627-632, 2009.

Y. Sawada and N. Watanabe, Thermal decomposition of silver carbonate 1. Differential thermal gas analysis, Thermochimica Acta, vol.138, issue.2, 1989.

G. I. Waterhouse, G. A. Bowmaker, and J. B. Metson, Oxygen chemisorption on an electrolytic silver catalyst: a combined TPD and Raman spectroscopic study, Applied Surface Science, vol.214, pp.36-51, 2003.

Y. Y. Toshiaki-morita, E. Ide, Y. Akada, and A. Hirose, Bonding Technique Using Micro-Scaled Silver-Oxide Particles for In-Situ Formation of Silver Nanoparticles, Materials transactions, vol.49, 2001.

F. Louvet and L. Delplanque, Les plans d'expériences, une approche pragmatique et illustrée, 2005.

, Engineering statistics handbook

S. Fritzsche, W. Schmitt, and M. Thomas, Sinter materials for broad process windows in DCB packages, concepts and results, 2012.

J. Li, Experimental report for sintering of Ag nanoparticle paste for semiconductor device attachment

B. Dauvillier, J. Bergwerff, . A. Dr, and . Van-dillen, The interaction of O2 with silver

C. C. Lee, H. Y. Chuang, C. K. Chung, and C. R. Kao, Oxidation behavior of ENIG and ENEPIG surface finish, Microsystems Packaging Assembly and Circuits Technology Conference (IMPACT), pp.20-22, 2010.

K. James, Reliability Study of Wire Bonds to Silver Plated Surfaces, IEEE transactions on parts, hybrids, and packaging, vol.13, 1977.

G. D. Lewis and S. Mannan, Evaluation of pressure free nanoparticle sintered silver die attach on silver and gold surfaces, HiTEN, 8-10 Juil, 2013.

H. De-monestrol, L. Schmirgeld-mignot, S. Poissonnet, C. Lebourgeois, and G. Martin, Reactive Solid State Dewetting: Interfacial Cavitation in the System Ag-Ni-O", Interface science, vol.11, pp.379-390, 2003.

N. J. Simrick, J. A. Kilner, and E. A. Atkinson, Thermal stability of silver thin films on zirconia substrates, Thin Solid Films, vol.520, pp.2855-2867, 2012.

M. B. Lazar, Etude du dopage par implantation ionique d'aluminium dans le carbure de silicium pour la réalisation de composants de puissance, 2002.

J. M. Montes, F. G. Cuevas, J. Cintas, and P. Urban, Electrical conductivity and porosity relationship in metal foams, Journal of Porous Materials, vol.16, issue.6, pp.675-681, 2008.

D. J. Andrew, A. Wereszczak, H. Wang, K. Mattison, Z. Ferber et al., Properties of Bulk Sintered Silver As a Function of Porosity, 2012.