T. Dans-cette, Ces tests peuvent se faire suivant le plan expérimental présenté dans ce manuscrit pour une comparaison expérimental-numérique basé sur le traitement d'éprouvettes minces. Des essais sur des pièces épaisses dont la loi de comportement mécanique est bien connue seraient également intéressants. Cela permettra de confirmer ou d'infirmer certaines des hypothèses faites dans ce manuscrit comme la faible influence des effets thermiques. Par ailleurs, des travaux doivent être menées pour étudier la tenue mécanique de l'inducteur pendant le traitement électromagnétique. Les premiers tests du prototype ont montré qu'il s'agit là d'un point critique dans le dispositif, Cela permettra d'obtenir une validation complète du présent modèle et d'effectuer des modifications si nécessaire. Concernant le traitement de surface par impulsions électromagnétiques, des essais pourront être réalisés à l'aide du prototype construit au LaMCoS

, Abayomi Emmanuel SONDE

M. Achinta, D. Nowell, D. Fufari, E. Sackett, and M. Bach, Fatigue behaviour of geometric features subjected to laser shock peening : Experiments and modelling, INSA Lyon, tous droits réservés, vol.62, pp.171-179, 2014.

H. Alehossein and Z. Qin, Numerical analysis of Rayleigh-Plesset equation for cavitating water jets, International Journal for Numerical Methods in Engineering, vol.72, pp.780-807, 2007.

S. Al-hassani, Magnetic pressure distributions in sheet metal forming, Proceedings of the Conference on Electrical Methods of Machining, Forming and Coating, pp.1-10, 1975.

H. Amarchinta, Uncertainty quantification of residual stresses induced by laser peening simulation, 2010.

N. Anantharamaiah, H. Vahedi-tafreshi, and B. P. , A study on flow through hydroentangling nozzles and their degradation, Chemical Engineering Science, vol.61, pp.4582-4594, 2006.

N. Anderholm, Laser generated stress waves, Applied Physics Letters, vol.16, issue.3, pp.113-115, 1970.

A. I. Ansys and . Cfd, , 2012.

A. I. Ansys-fluent, Release 15.0, Theory Guide, 2004.

M. Azhari, Effects of waterjet treatment on surface integrity of metals and its optimization, 2014.

, Abayomi Emmanuel SONDE 199

J. Barralis, L. Castex, and G. Maeder, Précontraintes et traitements superficiels. Techniques de l'ingénieur, vol.1180, 1999.

D. Bardel, Rôle de la microstructure d'un alliage à durcissement structural sur son comportement et sa tenue mécanique sous sollicitations cycliques après un transitoire thermique, 2014.

S. De-barros, P. Kenedi, S. Ferreira, S. Budhe, A. Bernardino et al., Influence of mechanical surface treatment on fatigue life of bonded joints, The Journal of Adhesion, vol.93, pp.599-612, 2017.

C. Beerwald, A. Brosius, W. Homberg, M. Kleiner, M. Klocke et al., Extended finite element modelling of electromagnetic forming, Proceedings of the 10 th International Conference on Sheet Metal Forming, pp.559-566, 2003.

B. Bendjima and M. Feliachi, Finite element analysis of transient phenomena in electromagnetic forming system. Computation in electromagnetics, pp.113-116, 1996.

L. Berthe, R. Fabbro, P. Peyre, L. Tollier, and E. Bartnicki, Shock waves from a water-confined laser-generated plasma, Journal of Applied Physics, vol.82, issue.6, pp.2826-2832, 1997.

J. Bergheau and P. Conraux, FEM-BEM coupling for the modelling of induction heating processes including moving parts, Journal of Shanghai Jiaotong University, vol.5, issue.1, pp.91-99, 2000.

G. Birkhoff, Note on Taylor instability, Quarterly of Applied Mathematics, vol.12, pp.306-309, 1954.

J. Blake, B. Taib, and G. Doherty, Transient cavities near boundaries part 1 : Rigid boundary, Journal of Fluid Mechanics, vol.170, pp.479-497, 1986.

J. Blaizot, Etude de l'influence des procédés de fabrication sur les propriétés mécaniques des alliages de nickel, 2015.

, Abayomi Emmanuel SONDE

H. Blickwedel, H. Haferkamp, H. Louis, and P. Tai, Modification of material structure by cavitation and liquid impact and their influence on mechanical properties, INSA Lyon, tous droits réservés, vol.87, pp.31-32, 1987.

R. Blowers, On the Response of an Elastic Solid to Droplet Impact, Journal of the Institute of Mathematics and its Applications, vol.5, pp.167-193, 1969.

R. Boudot, Méthode d'évaluation de la sensibilité à la corrosion sous contrainte en milieu primaire REP de pièces en alliage à base de nickel

J. Brackbill, D. Kothe, and C. Zemach, A continuum method for modeling surface tension, Journal of Computational Physics, vol.100, pp.335-354, 1992.

C. Brennen, The dynamic balances of dissolved air and heat in natural cavity flows, Journal of Fluids Mechanics, vol.37, issue.1, pp.115-127, 1969.

C. Brennen, Spherical bubble dynamics, 1995.

S. Bruemmer, L. Charlot, and C. Henager, Microstructure and microdeformation effects on IGSCC of alloy 600 steam generator tubing, Corrosion, vol.44, issue.11, pp.782-788, 1988.

Q. Cao, L. Li, Z. Lai, Z. Zhou, Q. Xiong et al., Dynamic analysis of electromagnetic sheet metal forming process using finite element method, The International Journal of Advanced Manufacturing Technology, vol.74, issue.1, pp.361-368, 2014.

, Cetinarslan Effect of cold plastic deformation on electrical conductivity of various materials, Materials and Design, vol.30, pp.671-673, 2009.

I. Chaieb, Analyse et simulation des contraintes résiduelles induites par des traitements mécaniques de précontrainte en grenaillage et choc laser, 2004.

T. Chaise, J. Li, D. Nelias, R. Kubler, S. Taheri et al., Modelling of multiple impacts for the prediction of distortions and residual stresses, Abayomi Emmanuel SONDE, vol.201
URL : https://hal.archives-ouvertes.fr/hal-00760355

A. Chazottes-leconte, E. Sonde, L. Plantevin, C. Joubert, T. Chaise et al., The effect of an electromagnetic peening process on mumetal properties, The 19 th IEEE International Conference on Industrial Technology, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01800374

R. Cole, Underwater Explosions, 1948.

J. Correia, M. Siddiqui, S. Ahzi, S. Belouettar, and R. Davies, A simple model to simulate electromagnetic sheet free bulging process, International Journal of Mechanical Sciences, vol.50, pp.1466-1475, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00425606

X. Cui, J. Mo, and Y. Zhu, 3D modeling and deformation analysis for electromagnetic sheet forming process, Transactions of Nonferrous Metals Society of China, vol.22, issue.1, pp.164-169, 2012.

C. Dubouchet, Traitements thermomécaniques de surfaces métalliques à l'aide de lasers CO2 continus et de lasers impulsionnels, 1993.

J. Dydo and S. Yushnov, System and method for electromagnetic pulse surface treatment. US Patent, Reference Manual. ESI Group, 2008.

J. Etaix, Candido Reis R. Observation et Compréhension du Cavitation Peening. Rapport de projet de fin d'études, 2017.

R. Fabbro, J. Fournier, P. Ballard, D. Devaux, and J. Virmont, Physical study of laser-produced plasma in confined geometry, Journal of Applied Physics, vol.68, issue.2, pp.775-784, 1990.

J. Field, Liquid impact : theory, experiment, applications. Wear, pp.1-12, 1999.

, Abayomi Emmanuel SONDE

R. Fortes-patella, G. Challier, J. Reboud, and A. Archer, Energy balance in cavitation erosion : from bubble collapse to indentation of material surface, INSA Lyon, tous droits réservés, vol.13, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00980543

J. Fournier, Génération d'ondes de choc par laser pulsé de forte énergie. Applications mécaniques et métallurgiques, 1989.

J. Fox, Effect of water and paint coatings on laser-irradiated targets, Applied Physics Letters, vol.24, issue.10, pp.461-464, 1974.

J. Franc and J. Michel, Fundamentals of Cavitation, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00216178

S. Fujikawa and T. Akamatsu, Effects of the non-equilibrium condensation of vapour on the pressure wave produced by the collapse of a bubble in a liquid, Journal of Fluid Mechanics, vol.97, issue.3, pp.481-512, 1980.

S. Gangaraj, M. Guagliano, and G. Farrahi, An approach to relate shot peening finite element simulation to the actual coverage, Surface and Coating Technology, vol.243, pp.39-45, 2014.

D. Gayakwad, M. Dargar, P. Sharma, R. Purohit, and R. Rana, A Review on electromagnetic forming process, Procedia Materials Science, vol.6, pp.520-527, 2014.

F. Gilmore, The growth or collapse of a spherical bubble in a viscous compressible liquid. rapport, 1952.

Y. Haiping, L. Chunfeng, and D. Jianghua, Sequential coupling simulation for electromagnetic-mechanical tube compression by finite element analysis, Journal of Materials Processing Technology, vol.209, issue.2, pp.707-713, 2009.

B. Han and D. Ju, Compressive residual stress induced by water cavitation peening : A finite element analysis, Materials and Design, vol.30, issue.8, pp.3325-3332, 2009.

B. Han, D. Ju, and X. Yu, Combined finite element method and dislocation density method solution to residual stress induced by water cavitation peening, Materials and Design, vol.31, issue.7, pp.3317-3323, 2010.

, Abayomi Emmanuel SONDE, vol.203

H. Hewitt and J. Parker, Bubble growth and collapse in liquid nitrogen, Journal of Heat Transfer, vol.90, issue.1, pp.22-26, 1968.

J. Hinze and . Turbulence, , 1975.

C. Hirt and B. Nichols, Volume of fluid (vof) method for the dynamics of free boundaries, Journal of Computational Physics, vol.39, issue.1, pp.201-225, 1981.

J. Holzfuss, M. Ruggeberg, and A. Billo, Shock wave emissions of a sonoluminescing bubble, Physical Review Letters, vol.81, pp.5434-5437, 1998.

C. Hsu, C. Liang, T. Teng, and A. Nguyen, A numerical study on high-speed water jet impact, Ocean Engineering, vol.72, pp.98-106, 2013.

, IAEA Stress corrosion cracking in light water reactors : Good practices and lessons learned, IAEA Nuclear Energy Series NP, 2011.

J. Imbert, S. Winckler, M. Worswick, and D. Oliveira, Golovashchenko S. The effect of tool-sheet interaction on damage evolution in electromagnetic forming of aluminum alloy sheet, Transactions of the ASME, vol.127, issue.1, pp.145-153, 2005.

N. Ishiyama, M. Mayuzumi, Y. Mizutani, and J. Tani, Stress corrosion cracking of type 316 and 316L stainless steels in high temperature water, Proceedings of the 12 th International Conference on Environmental Degradation of Materials in Nuclear Power System-Water Reactors The Minerals, Metals & Materials Society (TMS), pp.57-63, 2005.

W. Johnson and G. Vickers, Transient stress distribution caused by water-jet impact, Journal of Mechanical Engineering Science, vol.15, issue.4, pp.302-310, 1973.

D. Joseph, Cavitation and the state of stress in a flowing liquid, Journal of Fluid Mechanics, vol.366, issue.1, pp.367-378, 1998.

, Abayomi Emmanuel SONDE

J. Keller and M. Miksis, Bubble oscillations of large amplitude, Journal of the Acoustical Society of America, vol.68, issue.2, pp.628-633, 1980.

A. Keller and H. Rott, The Effect of Flow Turbulence on Cavitation Inception, ASME FED Meeting, 1997.

S. Kim, D. Choudhury, and B. Patel, Computations of Complex Turbulent Flows Using the Commercial Code ANSYS Fluent, Proceedings of the ICASE/LaRC/AFOSR Symposium on Modeling Complex Turbulent Flows, 1997.

A. Klumpp, F. Lienert, S. Dietrich, H. Soyama, and V. Schulze, Surface strengthening of AISI4140 by cavitation peening, Proceedings of the 13 th International Conference on Shot Peening, pp.441-446, 2017.

R. Kubler, M. Desvignes, and A. Fabre, Representative simulations of the shot peening process, AIP Conference Proceedings, vol.1315, pp.1675-1680, 2011.

M. Kulekci and U. Esme, Critical analysis of processes and apparatus for industrial surface peening technologies, The International Journal of Advanced Manufacturing Technology, vol.74, issue.9, pp.1551-1565, 2014.

K. Kumar and V. Moholkar, Conceptual design of a novel hydrodynamic cavitation reactor, Chemical Engineering Science, vol.62, pp.2698-2711, 2007.

J. Kuniya, I. Masaoka, and R. Sasaki, Effect of cold work on the stress corrosion cracking of non-sensitized AISI 304 stainless steel in high temperature oxygenated water, Corrosion, vol.44, issue.1, pp.21-28, 1988.

S. Kunaporn, An experimental and numerical analysis of waterjet peening of 7075-T6 aluminim alloy, 2002.

S. Kunaporn, M. Ramulu, M. Jenkins, and M. Hashish, Residual stress induced by waterjet peening : a finite element analysis, Journal of Pressure Vessel Technology, vol.126, pp.333-340, 2004.

, Abayomi Emmanuel SONDE, p.205

W. Lauterborn, Kavitation durch laserlicht. Acustica, vol.31, pp.51-78, 1974.

W. Lee, C. Liu, and T. Sun, Deformation behavior of inconel 690 super alloy evaluated by impact test, Journal of Materials Processing Technology, pp.219-225, 2004.

M. Lesser and J. Field, The impact of compressible liquids, Annual Review of Fluid Mechanics, vol.15, pp.97-122, 1983.

J. Li, Simulation de réparation par soudage et billage ultrasonore d'un alliage à base Nickel, 2011.

A. Lichtarowicz, Experiments with cavitating jets, Proceedings of the 2 nd International Symposium on Jet Cutting Technology, Paper D1 BHRA, pp.1-6, 1974.

M. Lieblich, S. Barriuso, J. Ibanez, L. Ruiz-de-lara, M. Diaz et al., On the fatigue behavior of medical Ti6Al4V roughened by grit blasting and abrasiveless waterjet peening, Journal of the Mechanical Behavior of Biomedical Materials, vol.63, pp.390-398, 2016.

I. Lillamand, Evolution d'une couche grenaillée sous sollicitations thermiques et mécaniques : Cas de la fatigue oligocyclique, 1999.

L. Liu, Y. Yang, P. Liu, and W. Tan, The influence of air content in water on ultrasonic cavitation field, Ultrasonics Sonochemistry, vol.21, pp.566-571, 2014.

H. Liu, C. Kang, W. Zhang, and T. Zhang, Flow structures and cavitation in submerged waterjet at high jet pressure, Experimental Thermal and Fluid Science, vol.88, pp.504-512, 2017.
DOI : 10.1016/j.expthermflusci.2017.07.003

C. Loto, Stress corrosion cracking : characteristics, mechanisms and experimental study, The International Journal of Advanced Manufacturing Technology, vol.93, pp.3567-3582, 2017.
DOI : 10.1007/s00170-017-0709-z

, Abayomi Emmanuel SONDE

L. Ma, R. Bao, and Y. Guo, Waterjet penetration simulation by hybrid code of SPH and FEA, INSA Lyon, tous droits réservés, vol.35, pp.1035-1042, 2008.
DOI : 10.1016/j.ijimpeng.2007.05.007

D. Maisonnette, Influences mécaniques et métallurgiques de procédés haute température sur un alliage d'aluminium 6061-T6, 2010.

T. Manea, M. Verweij, and H. Blok, The importance of the velocity term in the electromagnetic forming process. Proceedings of the 27 th general assembly of the international union of radio science URSI, pp.112-115, 2002.

J. Marteau, M. Bigerelle, P. Mazeran, and S. Bouvier, Relation between roughness and processing conditions of AISI 316L stainless steel treated by ultrasonic shot peening, Tribology International, vol.82, pp.319-329, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01993218

C. Mauger, Cavitation dans un micro-canal modèle d'injecteur diesel : méthodes de visualisation et influence de l'état de surface, 2012.

S. Meguid, G. Shagal, and J. Stranart, Finite element modelling of shot-peening residual stresses, Journal of Materials Processing Technology, vol.92, issue.93, pp.401-404, 1999.
DOI : 10.1016/s0924-0136(99)00153-3

S. Meguid, G. Shagal, and J. Stranart, 3D FE analysis of peening of strain-rate sensitive materials using multiple impingement model, International Journal of Impact Engineering, vol.27, pp.119-134, 2002.

H. Miao, S. Larose, C. Perron, and M. Levesque, On the potential applications of a 3D random finite element model for the simulation of shot peening, Advances in Engineering Software, vol.40, pp.1023-1038, 2009.

V. Minsier, Numerical simulation of cavitation-induced bubble dynamics near a solid surface, 2009.

B. Mohan, W. Yang, and S. Chou, Cavitation in injector nozzle holes-A parametric study, Engineering Applications of Computational Fluid Mechanics, vol.8, issue.1, pp.70-81, 2014.
DOI : 10.1080/19942060.2014.11015498
URL : https://www.tandfonline.com/doi/pdf/10.1080/19942060.2014.11015498?needAccess=true

, Abayomi Emmanuel SONDE, vol.207

S. Insa-lyon-;-nagrath, K. Jansen, R. Lahey, and I. Akhatov, Hydrodynamic simulation of air bubble implosion using a level set approach, Journal of Computational Physics, vol.215, issue.1, pp.98-132, 2006.

K. Neusen, T. Gores, and R. Amano, Axial variation of particle and drop celocities downstream from the abrasive waterjet mixing tube, Proceedings of the 12 th International Conference on Jet Cutting Technology-Applications and Opportunities British Hydromechanics Research Group (BHRG), pp.93-103, 1994.

D. Odhiambo and H. Soyama, Cavitation shotless peening for improvement of fatigue strength of carbonized steel, International Journal of Fatigue, vol.25, pp.1217-1222, 2003.

C. Ohl, T. Kurz, R. Geisler, O. Lindau, and W. Lauterborn, Bubble dynamics, shock waves and sonoluminescence, Philosophical of the Royal Society Transactions A, vol.357, pp.269-294, 1999.
DOI : 10.1098/rsta.1999.0327

D. Oliveira, M. Worswick, M. Finn, and D. Newman, Electromagnetic forming of aluminum alloy sheet : Free-form and cavity fill experiments and model, Journal of Materials Processing Technology, vol.170, issue.2, pp.350-362, 2005.

Y. Oshida and J. Daly, Fatigue damage evolution of shot peened high strength aluminium alloy, 1990.

R. Pascal, Modélisation du traitement thermique superficiel par induction, 2003.
DOI : 10.3166/reef.13.667-678

R. Pascal, P. Conraux, and J. Bergheau, Coupling between finite elements and boundary elements for the numerical simulation of induction heating processes using a harmonic balance method, IEEE Transactions on Magnetics, vol.39, pp.1535-1538, 2003.

M. Pedro, Etude expériementale de la mise en compression par jet d'eau. Rapport de projet de fin d'études, 2016.

K. Peng, S. Tian, G. Li, Z. Huang, and Z. Zhang, Cavitation in water jet under high ambient pressure conditions, Experimental Thermal and Fluid Science, vol.89, pp.9-18, 2017.
DOI : 10.1016/j.expthermflusci.2017.07.021

P. Peyre, L. Berthe, R. Fabbro, and . Le-choc-laser-en, , 2006.

, Abayomi Emmanuel SONDE

A. Philipp and W. Lauterborn, Cavitation erosion by single laser-produced bubbles, Journal of Fluid Mechanicse, vol.361, pp.75-116, 1998.

C. Pilé, Le grenaillage par ultraosns : caractérisation du procédé et influence sur la fatigue d'alliages TiAl, 2005.

M. Plesset and S. Zwick, A nonsteady heat diffusion problem with spherical symmetry, Journal of Applied Physics, vol.23, issue.1, pp.95-98, 1952.

M. Plesset and T. Mitchell, On the stability of the spherical shape of a vapor cavity in a liquid, Quarterly of Applied Mathematics, vol.13, issue.4, pp.419-430, 1956.

M. Plesset and A. Prosperetti, Bubble dynamics and cavitation, Annual Review of Fluid Mechanics, vol.9, pp.145-185, 1977.
DOI : 10.1146/annurev.fl.09.010177.001045

A. Prosperetti and A. Lezzi, Bubble dynamics in a compressible liquid. Part 1. First order theory, Journal of Fluid Mechanics, vol.168, pp.457-478, 1986.

V. Psyk, D. Risch, B. Kinsey, A. Tekkaya, and M. Kleiner, Electromagnetic forming-A review, Journal of Materials Processing Technology, vol.211, issue.5, pp.787-829, 2011.

M. Qin, D. Ju, and R. Oba, Investigation of the influence of incidence angle on the process capability of water cavitation peening, Surface and Coatings Technology, vol.201, issue.4, pp.1409-1413, 2006.

Z. Qin, K. Bremhorst, H. Alehossein, and T. Meyer, Simulation of cavitation bubbles in a convergent-divergent nozzle water jet, Journal of Fluid Mechanics, vol.573, pp.1-25, 2007.

T. Qiu, X. Song, Y. Lei, X. Liu, X. An et al., Influence of inlet pressure on cavitation flow in diesel nozzle, Applied Thermal Engineering, vol.109, pp.364-372, 2016.

, Abayomi Emmanuel SONDE, vol.209

L. Rayleigh, On the pressure developed in a liquid during the collapse of a spherical cavity, Philosophical Magazine, vol.34, pp.94-98, 1917.

O. Redlich and K. Kwong, On the thermodynamics of solutions : V. An equation of state : fugacities of gaseous solutions, Chemical Reviews, vol.44, pp.233-244, 1949.

V. Robin, E. Feulvarch, and J. Bergheau, 3D modelling of electro-magneto forming of metal sheets, Proceedings of the International Conference on Advances in Materials and Processing Technologies (AMPT), 2008.

V. Robin, E. Feulvarch, and J. Bergheau, Modélisation tridimensionnelle du procédé de mise en forme électromagnétique

, Mécanique & Industries, vol.9, issue.2, pp.133-138, 2008.

V. Robin, De la modélisation numérique des procédés et du soudage en particulier au comportement mécanique des assemblages, 2009.

I. Rohr, H. Nahme, K. Thoma, and C. Anderson, Material characterisation and constitutive modelling of a tungsten-sintered alloy for a wide range of strain rates, International Journal of Impact Engineering, vol.35, issue.8, pp.811-819, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00499107

E. Rosa and F. Grover, Formulas and tables for the calculation of mutual and self-inductance, Scientific Papers of the Bureau of Standards, vol.169, issue.3, pp.135-137, 1916.

E. Rouhaud, A. Ouakka, C. Ould, J. Chaboche, and M. Francois, Finite Elements model of shot peening, effects of constitutive laws of the material, Proceedings of the 9 th International Conference on Shot Peening, pp.107-112, 2005.

E. Samiei, M. Shams, and R. Ebrahimi, A novel numerical scheme for the investigation of surface tension effects on growth and collapse stages of cavitation bubbles, European Journal of Mechanics B/Fluids, vol.30, pp.41-50, 2011.

, Abayomi Emmanuel SONDE

G. Schnerr and J. Sauer, Physical and numerical modeling of unsteady cavitation dynamics, Proceedings of the Fourth International Conference on Multiphase Flow, 2004.

A. Shima, K. Takayama, Y. Tomita, and N. Miura, An experimental study on effects of a solid wall on the motion of bubbles and shock waves in bubble collapse, Acustica, vol.48, pp.293-301, 1981.

T. Shih, W. Liou, A. Shabbir, Z. Yang, and J. Zhu, A new k ? eddy-viscosity model for high Reynolds number turbulent flows-Model development and validation, Computers Fluids, vol.24, issue.3, pp.227-238, 1995.

M. Siddiqui, Numerical modelling and simulation of electromagnetic forming process, 2009.

A. Singhal, M. Athavale, H. Li, and Y. Jiang, Mathematical basis and validation of the full cavitation model, Journal of Fluids Engineering, vol.124, issue.3, pp.617-624, 2002.

G. Soave, Equilibrium constants from a modified Redlich-Kwong equation of state, Chemical Engineering Science, vol.27, pp.1197-1203, 1972.

H. Song, Analyse expérimentale et numérique de la distribution des contraintes résiduelles induites par choc-laser dans des alliages d'aluminium, Arts et Métiers ParisTech, 2010.

E. Sonde, T. Chaise, D. Nelias, and V. Robin, On the numerical simulation of electromagnetic pulse peening, Computational methods in manufacturing processes (ICOMP), 2016.

E. Sonde, T. Chaise, D. Nelias, C. Mauger, and N. Boisson, On the Modelling of Impulsive Pressures and Residual Stresses Induced by Cavitation Peening, Proceedings of the 13 th International Conference on Shot Peening, pp.561-566, 2017.
URL : https://hal.archives-ouvertes.fr/hal-02096283

E. Sonde, T. Chaise, D. Nelias, C. Mauger, and N. Boisson, Residual stresses induced by cavitation peening, Proceedings of the 6 th World Tribology Congress (WTC), 2017.
URL : https://hal.archives-ouvertes.fr/hal-02096283

, Abayomi Emmanuel SONDE, vol.211

E. Sonde, T. Chaise, D. Nelias, and V. Robin, Numerical simulation of electromagnetic surface treatment, INSA Lyon, tous droits réservés, vol.123, p.45901, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01913794

A. Sou, B. Bicer, and A. Tomiyama, Numerical simulation of incipient cavitation flow in a nozzle of fuel injector, Computers & Fluids, vol.103, pp.42-48, 2014.

H. Soyama, Y. Yamauchi, Y. Adachi, K. Sato, T. Shindo et al., High-speed observations of the cavitation cloud around a high-speed submerged water jet, The Japan Society of Mechanical Engineers International Journal, vol.38, issue.2, pp.245-251, 1995.

H. Soyama, Y. Yamauchi, K. Sato, T. Ikohagi, R. Oba et al., High-speed observation of ultrahigh-speed submerged water jets, Experimental Thermal and Fluid Science, vol.12, pp.411-416, 1996.

H. Soyama, Improvement in Fatigue Strengh of Silicon Manganese Steel SUP7 by using a Cavitation Jet, The Japan Society of Mechanical Engineers International Journal, vol.43, issue.2, pp.173-178, 2000.

H. Soyama, J. Park, and M. Saka, Use of cavitating jet for introducing compressive residual stress, Journal of Manufacturing Science and Engineering, vol.122, issue.1, pp.83-89, 2000.

H. Soyama, T. Kusaka, and M. Saka, Peening by the use of cavitation impacts for the improvement of fatigue strength, Journal of Materials Science Letters, vol.20, pp.1263-1265, 2001.

H. Soyama, K. Saito, and M. Saka, Improvement of Fatigue Strength of Aluminum Alloy by Cavitation Shotless Peening, Journal of Engineering Materials and Technology, vol.124, pp.135-139, 2002.

H. Soyama, Introduction of compressive residual stress using a cavitation jet in air, Journal of Engineering Materials and Technology, vol.126, pp.123-128, 2004.

H. Soyama, D. Macodiyo, and S. Mall, Compressive residual stress into titanium alloy using cavitation shotless peening method, Tribology Letters, vol.17, issue.3, pp.501-504, 2004.

, Abayomi Emmanuel SONDE

H. Soyama and D. Macodiyo, Fatigue strength improvement of gears using cavitation shotless peening, Tribology Letters, vol.18, issue.2, pp.181-184, 2005.

H. Soyama, Improvement of fatigue strength by using cavitating jets in air and water, Journal of Materials Science, vol.42, issue.16, pp.6638-6641, 2007.

H. Soyama, Y. Sekine, and Y. Oyama, Improvement of the fatigue strength of stainless steel SUS316L by a cavitating jet with an associated water jet in water, ISIJ) International, vol.48, issue.11, pp.1577-1581, 2008.

H. Soyama, Introduction of compressive residual stress into alloy steel by cavitation peening using laser cavitation, Proceedings of the 13 th International Conference on Shot Peening, 2017.

H. Soyama and F. Takeo, Improvement of tensile fatigue strength of duralumin plate with a hole by cavitation peening using opposed cavitating jets, Proceedings of the 13 th International Conference on Shot Peening, 2017.

P. Spalart, Detached-Eddy Simulation, Annual Review of Fluid Mechanics, vol.41, pp.181-202, 2009.

B. Stoffel and W. Schuller, Investigations Concerning the Influence of Pressure Distribution and Cavity Length on Hydrodynamic Cavitation Intensity, ASME Fluids Engineering Conference, 1995.

J. Stykova, M. Muller, and J. Hujer, The improvement of the surface hardness of stainless steel and aluminium alloy by ultrasonic cavitation peening, EPJ Web of Conferences, vol.143, p.2119, 2017.

Q. Sun, Q. Han, X. Liu, W. Xu, and J. Li, The effect of surface contamination on corrosion performance of ultrasonic shot peened 7150 Al alloy, Surface and Coatings Technology, vol.328, pp.469-479, 2017.

, Abayomi Emmanuel SONDE, vol.213

N. Takatsu, M. Kato, K. Sato, and T. Tobe, High-speed forming of metal sheets by electromagnetic force, The Japan Society of Mechanical Engineers International Journal, vol.31, issue.1, pp.142-148, 1988.

O. Takakuwa and H. Soyama, The effect of scanning pitch of nozzle for a cavitating jet during overlapping peening treatment, Surface & Coatings Technology, vol.206, pp.4756-4762, 2012.

Y. Tamarin, Atlas of Stress-Strain Curves, second edition, 2002.

M. Taro, Modélisation et simualtion des procédés de mise en compression de surfaces à très grandes vitesses de déformation par méthode semi-analytique, 2015.

M. Taro, T. Chaise, and D. Nelias, Modeling of ultra-high-speed impact at the surface of an elastic half-space, Wave Motion, vol.58, pp.77-100, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01914214

T. Theofanous, L. Biasi, H. Isbin, and H. Fauske, A theoretical study on bubble growth in constant and time-dependent pressure fields, Chemical Engineering Science, vol.24, issue.5, pp.885-897, 1969.

P. Thielen, M. Fine, and R. Fournelle, Cyclic stress strain relations and strain-controlled fatigure of 4140 steel, Acta Metallurgica, vol.24, pp.1-10, 1976.

Y. Tomita and A. Shima, On the behavior of a spherical bubble and the impulse pressure in a viscous compressible liquid, Bulletin of the Japan Society of Mechanical Engineers, vol.20, issue.149, pp.1453-1460, 1977.

Y. Tomita and A. Shima, High-speed photographic observations of laser-induced cavitation bubbles in water. Acustica, vol.71, pp.161-171, 1990.

H. Tonshoff, F. Kroos, and C. Marzenell, High-pressure water peening-A new mechanical surface-strengthening process, Annals of the CIRP-Manufacturing Technology, vol.46, issue.1, pp.113-116, 1997.

, Abayomi Emmanuel SONDE

R. Tong, W. Schiffers, S. Shaw, J. Blake, and D. Emmony, The role of splashing in the collapse of a laser-generated cavity near a rigid boundary, INSA Lyon, tous droits réservés, vol.380, pp.339-361, 1999.

A. Travin, M. Shur, M. Strelets, and P. Spalart, Detached-eddy simulations past a circular cylinder, Flow, Turbulence and Combustion, vol.63, pp.293-313, 2000.

L. Trilling, The collapse and rebound of a gas bubble, Journal of Applied Physics, vol.23, pp.14-17, 1952.

F. Tu, D. Delbergue, H. Miao, T. Klotz, M. Brochu et al., A sequential DEM-FEM coupling method for shot peening simulation, Surface and Coating Technology, vol.319, pp.200-212, 2017.

C. Wang, X. Wang, Y. Xu, and Z. Gao, Numerical modeling of the confined laser shock peening of the OFHC copper, International Journal of Mechanical Sciences, pp.104-114, 2016.

J. Wang, Y. Zhang, Q. Sun, S. Liu, B. Shi et al., Giga-fatigue life prediction of FV520B-I with surface roughness, Materials and Design, vol.89, pp.1028-1034, 2016.

G. Was, R. Pelloux, and M. Frabolot, Effect of shot peening methods on the fatigue behavior of alloy 7075-T6, Proceedings of the 1 st International Conference on Shot Peening ISCSP, pp.445-451, 1981.

X. Wei, L. Xuesong, Y. Jianguo, F. Hongyuan, and X. Wenli, Effect of temperature on plastic deformation of sheet by electromagnetic force, Journal of Materials Processing Technology, vol.209, issue.5, pp.2693-2698, 2009.

A. Wick, H. Holzapfel, V. Schulze, and O. Vohringer, Effect of shot peening parameters on the surface characteristics of differently heat treated AISI 4140, Proceedings of the 7 th International Conference on Shot Peening International Scientific Committee for Shot Peening (ISCSP), pp.42-53, 1999.

J. Xie and D. Rittel, Three-dimensional stochastic modeling of metallic surface roughness resulting from pure waterjet peening, International Journal of Engineering Science, vol.120, pp.241-253, 2017.

, Abayomi Emmanuel SONDE

J. Xie and D. Rittel, A two-dimensional model for metallic surface roughness resulting from pure waterjet peening, International Journal of Engineering Science, vol.120, pp.189-198, 2017.

D. Xu, X. Liu, K. Fang, and H. Fang, Calculation of electromagnetic force in electromagnetic forming process of metal sheet, Journal of Applied Physics, vol.107, p.124907, 2010.

A. Yamaguchi and S. Shimizu, Erosion due to impingement of cavitating Jet, Journal of Fluids Engineering, vol.109, issue.4, pp.442-447, 1987.

L. Yang, Stress waves generated in thin metallic films by a Q-switched ruby laser, Journal of Applied Physics, vol.45, issue.6, pp.2601-2608, 1974.

K. Yanaida and A. Ohashi, Flow characteristics of water jets in air, Proceedings of the 4 th International Symposium on Jet Cutting Technology, Paper A3 BHRA Fluid Engineering, pp.39-54, 1978.

Y. D. Wang, D. Li, W. Li, X. Zheng, H. Naher et al., Development of a new 3D model for the prediction of residual stress and fracture behaviour in Ti-6Al-4V after ultrasonic peening treatment, Journal of Materials Processing Technology, vol.247, pp.29-39, 2017.

Y. F. Cavitation, , 1989.

J. Zhao, Y. Dong, and C. Ye, Laser shock peening induced residual stresses and the effect on crack propagation behavior, International Journal of Fatigue, vol.100, pp.407-417, 2017.

P. Zwart, A. Gerber, and T. Belamri, A two-phase flow model for predicting cavitation dynamics, Proceedings of the Fifth International Conference on Multiphase Flow Yokohama, 2004.

, Abayomi Emmanuel SONDE