, Let n(x) be the unit vector defining the preferred direction of the system, and let a(x) and b(x) be two unit vectors in R 3 such that (a(x), b(x), c(x)) are mutually orthogonal at the location x. Moreover, let

R. Ghanem and P. Spanos, Stochastic finite elements: a Spectral Approach, 1991.

R. Ghanem, D. Higdon, and H. Owhadi, Handbook of uncertainty quantification, 2017.

O. P. Le-maître and O. M. Knio, Spectral Methods for Uncertainty Quantification with Applications to Computational Fluid Dynamics, 2010.

T. J. Sullivan, Introduction to uncertainty quantification, vol.63, 2015.

C. Soize, Uncertainty Quantification: An Accelerated Course with Advanced Applications in Computational Engineering, vol.47, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01498996

K. Miller and K. Chinzei, Mechanical properties of brain tissue in tension, Journal of biomechanics, vol.35, issue.4, pp.483-490, 2002.

K. Miller and K. Chinzei, Constitutive modelling of brain tissue: experiment and theory, Journal of biomechanics, vol.30, issue.11, pp.1115-1121, 1997.

F. Velardi, F. Fraternali, and M. Angelillo, Anisotropic constitutive equations and experimental tensile behavior of brain tissue, Biomechanics and modeling in mechanobiology, vol.5, issue.1, pp.53-61, 2006.

M. Hrapko, J. A. Van-dommelen, G. W. Peters, and J. S. Wismans, Characterisation of the mechanical behaviour of brain tissue in compression and shear, Biorheology, vol.45, issue.6, pp.663-676, 2008.

B. Rashid, M. Destrade, and M. D. Gilchrist, Mechanical characterization of brain tissue in compression at dynamic strain rates, Journal of the mechanical behavior of biomedical materials, vol.10, pp.23-38, 2012.

B. Rashid, M. D. Gilchrist, and M. Destrade, Experimental characterisation of neural tissue at collision speeds, International Research Council on Biomechanics of Injury Conference, 2012.

X. Jin, F. Zhu, H. Mao, M. Shen, and K. H. Yang, A comprehensive experimental study on material properties of human brain tissue, Journal of Biomechanics, vol.46, issue.16, pp.2795-2801, 2013.

B. Rashid, M. Destrade, and M. D. Gilchrist, Mechanical characterization of brain tissue in simple shear at dynamic strain rates, Journal of the mechanical behavior of biomedical materials, vol.28, pp.71-85, 2013.

S. Umale, C. Deck, N. Bourdet, P. Dhumane, L. Soler et al., Experimental mechanical characterization of abdominal organs: liver, kidney & spleen, Journal of the mechanical behavior of biomedical materials, vol.17, pp.22-33, 2013.

B. Rashid, M. Destrade, and M. D. Gilchrist, Mechanical characterization of brain tissue in tension at dynamic strain rates, Journal of the mechanical behavior of biomedical materials, vol.33, pp.43-54, 2014.

I. Sakuma, Y. Nishimura, C. Chui, E. Kobayashi, H. Inada et al., In vitro measurement of mechanical properties of liver tissue under compression and elongation using a new test piece holding method with surgical glue, Surgery Simulation and Soft Tissue Modeling, pp.284-292, 2003.

C. Chui, E. Kobayashi, X. Chen, T. Hisada, and I. Sakuma, Combined compression and elongation experiments and non-linear modelling of liver tissue for surgical simulation, Medical and Biological Engineering and Computing, vol.42, issue.6, pp.787-798, 2004.

G. A. Holzapfel, G. Sommer, C. T. Gasser, and P. Regitnig, Determination of layer-specific mechanical properties of human coronary arteries with nonatherosclerotic intimal thickening and related constitutive modeling, American Journal of Physiology-Heart and Circulatory Physiology, vol.289, issue.5, pp.2048-2058, 2005.

A. Quarteroni, A. Manzoni, and C. Vergara, The cardiovascular system: mathematical modelling, numerical algorithms and clinical applications, Acta Numerica, vol.26, pp.365-590, 2017.

C. Soize, Non-gaussian positive-definite matrix-valued random fields for elliptic stochastic partial derivative operators, Computer Methods in Applied Mechanics and Engineering, vol.195, pp.26-64, 2006.

S. Das, R. Ghanem, and S. Finette, Polynomial chaos representation of spatio-temporal random field from experimental measurements, Journal of Computational Physics, vol.228, pp.8726-8751, 2009.

Q. Ta, D. Clouteau, and R. Cottereau, Modeling of random anisotropic elastic media and impact on wave propagation, European Journal of Computational Mechanics/Revue Européenne de Mécanique Numérique, vol.19, issue.1-3, pp.241-253, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00709537

J. Guilleminot, A. Noshadravan, R. Ghanem, and C. Soize, A probabilistic model for bounded elasticity tensor random fields with application to polycrystalline microstructures, Computer Methods in Applied Mechanics and Engineering, vol.200, pp.1637-1648, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00684305

J. Guilleminot and C. Soize, Non-gaussian positive-definite matrix-valued random fields with constrained eigenvalues: application to random elasticity tensors with uncertain material symmetries, International Journal for Numerical Methods in Engineering, vol.88, pp.1128-1151, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00684290

J. Guilleminot and C. Soize, Generalized stochastic approach for constitutive equation in linear elasticity: A random matrix model, International Journal for Numerical Methods in Engineering, vol.90, issue.5, pp.613-635, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00699345

J. Guilleminot and C. Soize, Stochastic modeling of anisotropy in multiscale analysis of heterogeneous materials: A comprehensive overview on random matrix approaches, Mechanics of Materials, vol.44, pp.35-46, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00684288

J. Guilleminot and C. Soize, Probabilistic modeling of apparent tensors in elastostatics: a maxent approach under material symmetry and stochastic boundedness constraints, Probabilistic Engineering Mechanics, vol.28, pp.118-124, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00686132

J. Guilleminot and C. Soize, Stochastic model and generator for random fields with symmetry properties: Application to the mesoscopic modeling of elastic random media, SIAM Multiscale Modeling & Simulation, vol.11, pp.840-870, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00854121

J. Guilleminot and C. Soize, On the statistical dependence for the components of random elasticity tensors exhibiting material symmetry properties, Journal of Elasticity, vol.111, pp.109-130, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00724048

J. Guilleminot and C. Soize, Isde-based generator for a class of non-gaussian vectorvalued random fields in uncertainty quantification, SIAM Journal on Scientific Computing, vol.36, pp.2763-2786, 2014.

B. Staber and J. Guilleminot, Approximate solutions of lagrange multipliers for information-theoretic random field models, SIAM/ASA Journal on Uncertainty Quantification, vol.3, pp.599-621, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01166830

A. Nouy and C. Soize, Random field representations for stochastic elliptic boundary value problems and statistical inverse problems, European Journal of Applied Mathematics, vol.25, issue.3, pp.339-373, 2014.

V. P. Tran, J. Guilleminot, S. Brisard, and K. Sab, Stochastic modeling of mesoscopic elasticity random field, Mechanics of Materials, vol.93, pp.1-12, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01226337

B. Staber and J. Guilleminot, Stochastic modeling and generation of random fields of elasticity tensors: A unified information-theoretic approach, Comptes Rendus Mécanique, vol.345, issue.6, pp.399-416, 2017.

A. Malyarenko and M. Ostoja-starzewski, A random field formulation of hooke's law in all elasticity classes, Journal of Elasticity, vol.127, issue.2, pp.269-302, 2017.

J. Guilleminot and C. Soize, Non-Gaussian Random Fields in Multiscale Mechanics of Heterogeneous Materials, pp.1-9, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01646981

A. Clément, C. Soize, and J. Yvonnet, Computational nonlinear stochastic homogenization using a non-concurrent multiscale approach for hyperelastic heterogeneous microstructures analysis, International Journal for Numerical Methods in Engineering, vol.91, issue.8, pp.799-824, 2012.

A. Clément, C. Soize, and J. Yvonnet, Uncertainty quantification in computational stochastic multiscale analysis of nonlinear elastic materials, Computer Methods in Applied Mechanics and Engineering, vol.254, pp.61-82, 2013.

A. Eddhahak-ouni, I. Masson, E. Allaire, and M. Zidi, Stochastic approach to estimate the arterial pressure, European Journal of Mechanics-A/Solids, vol.28, issue.4, pp.712-719, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00617073

A. Eddhahak-ouni, I. Masson, F. Mohand-kaci, and M. Zidi, Influence of random uncertainties of anisotropic fibrous model parameters on arterial pressure estimation, Applied Mathematics and Mechanics, vol.34, issue.5, pp.529-540, 2013.

J. Ma, S. Sahraee, P. Wriggers, and L. De-lorenzis, Stochastic multiscale homogenization analysis of heterogeneous materials under finite deformations with full uncertainty in the microstructure, Computational Mechanics, vol.55, issue.5, pp.819-835, 2015.

L. Xiong, C. Chui, Y. Fu, C. Teo, and Y. Li, Modeling of human artery tissue with probabilistic approach, Computers in biology and medicine, vol.59, pp.152-159, 2015.

J. Biehler, M. W. Gee, and W. A. Wall, Towards efficient uncertainty quantification in complex and large-scale biomechanical problems based on a bayesian multi-fidelity scheme, Biomechanics and modeling in mechanobiology, vol.14, issue.3, pp.489-513, 2015.

J. Biehler, S. Kehl, M. W. Gee, F. Schmies, J. Pelisek et al., Probabilistic noninvasive prediction of wall properties of abdominal aortic aneurysms using bayesian regression, Biomechanics and modeling in mechanobiology, vol.16, issue.1, pp.45-61, 2017.

B. Staber and J. Guilleminot, Stochastic modeling of a class of stored energy functions for incompressible hyperelastic materials with uncertainties, Comptes Rendus Mécanique, vol.343, issue.9, pp.503-514, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01223820

B. Staber and . Guilleminot, Stochastic hyperelastic constitutive laws and identification procedure for soft biological tissues with intrinsic variability, Journal of the mechanical behavior of biomedical materials, vol.65, pp.743-752, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01367381

B. Staber and J. Guilleminot, Stochastic modeling of the ogden class of stored energy functions for hyperelastic materials: the compressible case, ZAMM-Journal of Applied Mathematics and Mechanics/Zeitschrift für Angewandte Mathematik und Mechanik, vol.97, issue.3, pp.273-295, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01359703

B. Staber and J. Guilleminot, A random field model for anisotropic strain energy functions and its application for uncertainty quantification in vascular mechanics, Computer Methods in Applied Mechanics and Engineering, vol.333, pp.94-113, 2018.

L. A. Mihai, T. E. Woolley, and A. Goriely, Stochastic isotropic hyperelastic materials: constitutive calibration and model selection, Proc. R. Soc. A, vol.474, p.20170858, 2018.

I. Caylak, E. Penner, A. Dridger, and R. Mahnken, Stochastic hyperelastic modeling considering dependency of material parameters, Computational Mechanics, pp.1-13, 2018.

C. Truesdell and W. Noll, The Non-Linear Field Theories of Mechanics, 2004.

J. E. Marsden and T. J. Hughes, Mathematical Foundations of Elasticity, 1983.

P. G. Ciarlet, Three-Dimensional Elasticity, Mathematical Elasticity, vol.I, 1988.
URL : https://hal.archives-ouvertes.fr/hal-01077590

R. W. Ogden, Non-Linear Elastic Deformations, 1997.

G. A. Holzapfel, Nonlinear Solid Mechanics-A Continuum Approach for Engineering, The Atrium, 2000.

W. Noll, On the continuity of the solid and fluid states, Journal of Rational Mechanics and Analysis, vol.4, pp.3-81, 1955.

W. Noll, A mathematical theory of the mechanical behavior of continuous media. Archive for rational Mechanics and Analysis, vol.2, pp.197-226, 1958.

M. Gurtin, An introduction to continuum mechanics, vol.158, 1982.

J. Boehler, Applications of tensor functions in solid mechanics, vol.292, 1987.

Q. Zheng, Theory of representations for tensor functions-a unified invariant approach to constitutive equations, Applied Mechanics Reviews, vol.47, issue.11, pp.545-587, 1994.

H. Brezis, Functional analysis, Sobolev spaces and partial differential equations, 2010.

B. Dacorogna, Direct methods in the calculus of varations, 1989.

T. Roubí?ek, Nonlinear partial differential equations with applications, vol.153, 2013.

C. Morrey, Quasi-convexity and the lower semicontinuity of multiple integrals, Pacific Journal of Mathematics, vol.2, issue.1, pp.25-53, 1952.

J. M. Ball, Convexity conditions and existence theorems in nonlinear elasticity, Archive for Rational Mechanics and Analysis, vol.3, pp.337-403, 1977.

S. Müller, T. Qi, and B. S. Yan, On a new class of elastic deformations not allowing for cavitation, Ann. Inst. Henri Poincaré, Analyse Nonlinéaire, vol.11, issue.2, pp.217-243, 1994.

J. M. Ball, Some recent developments in nonlinear elasticity and its applications to materials science, Nonlinear Mathematics and its Applications, pp.93-119, 2006.

J. M. Ball, Some Open Problems in Elasticity. Geometry, Dynamics and Mechanics: 60th Birthday volume for, J.E. Marsden, 2002.

P. G. Ciarlet and G. Geymonat, Sur les lois de comportement en élasticité non-linéaire compressible, Les Comptes Rendus de l'Académie des Sciences, vol.295, pp.423-426, 1982.

P. Charrier, B. Dacorogna, B. Hanouzet, and P. Laborde, An existence theorem for slightly compressible materials in nonlinear elasticity, SIAM Journal on Mathematical Analysis, vol.19, issue.1, pp.70-85, 1988.

L. J. Walpole, Fourth-rank tensors on the thirty-two crystal classes: Multiplication tables, Proc. R. Soc. Lond. A, vol.391, pp.149-179, 1984.

R. Dautray and J. L. Lions, Mathematical Analysis and Numerical Methods for Science and Technology, Functional and variational methods, vol.2, 2000.

M. M. Mehrabadi and S. C. Cowin, Eigentensors of linear anisotropic elastic materials, The Quarterly Journal of Mechanics and Applied Mathematics, vol.43, pp.15-41, 1990.

J. Bernado and A. Smith, , 2000.

A. Gelman, J. Carlin, H. Stern, and D. Rubin, Bayesian Data Analysis, 2003.

R. W. Ogden, Large deformation isotropic elasticity-on the correlation of theory and experiment for compressible rubberlike solids, Proc. R. Soc. Lond. A, vol.326, pp.565-584, 1567.

R. W. Ogden, Large deformation isotropic elasticity-on the correlation of theory and experiment for incompressible rubberlike solids, Proc. R. Soc. Lond. A, vol.328, pp.567-583, 1575.

R. W. Ogden, G. Saccomandi, and I. Sgura, Fitting hyperelastic models to experimental data, Comput. Mech, vol.34, pp.484-502, 2004.
URL : https://hal.archives-ouvertes.fr/hal-01727230

P. Martins, J. R. Natal, and A. J. Ferreira, A comparative study of several material models for prediction of hyperelastic properties: Application to silicone-rubber and soft tissues, Strain, vol.42, issue.3, pp.135-147, 2006.

G. Chagnon, M. Rebouah, and D. Favier, Hyperelastic energy densities for soft biological tissues: A review, Journal of Elasticity, pp.1-32, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01480510

L. R. Treloar, Stress-strain data for vulcanised rubber under various types of deformation, Transactions of the Faraday Society, vol.40, pp.59-70, 1944.

M. Giaquinta, G. Modica, and J. Soucek, Cartesian currents and variational problems for mappings into spheres, Annali della Scuola Normale Superiore di Pisa, vol.16, issue.3, pp.393-485, 1989.

E. T. Jaynes, Information theory and statistical mechanics i, Physical Review, vol.106, issue.4, pp.620-630, 1957.

E. T. Jaynes, Information theory and stastitical mechanics ii, Physical Review, vol.108, issue.2, pp.171-190, 1957.

C. E. Shannon, A mathematical theory of communication, Bell System Technical Journal, vol.27, pp.379-423, 1948.

C. Soize, A nonparametric model of random uncertainties for reduced matrix models in structural dynamics, Probabilistic Engineering Mechanics, vol.15, issue.3, pp.277-294, 2000.
URL : https://hal.archives-ouvertes.fr/hal-00686293

M. Abramowitz and I. A. Stegun, Handbook of Mathematical Functions: With Formulas Graphs, And Mathematical Tables, 1970.

S. Kotz, N. Balakrishnan, and N. L. Johnson, Continuous Multivariate Distributions, vol.1, 2000.

L. Devroye, Non-Uniform Random Variate Generation, 1986.

S. Nadarajah and S. Kotz, On the product and ratio of gamma and beta random variables, Allgemeines Statistisches Archiv, vol.89, issue.4, pp.435-449, 2005.

S. Das and R. Ghanem, A bounded random matrix approach for stochastic upscaling, Multiscale Model. Simul, vol.8, issue.1, pp.296-325, 2009.

A. K. Gupta, L. Cardeño, and D. K. Nagar, Matrix variate kummer-dirichlet distributions, Journal of Applied Mathematics, vol.1, issue.3, pp.117-139, 2001.

C. P. Robert and G. Casella, Monte Carlo Statistical Methods, 2005.

C. Soize, Construction of probability distributions in high dimension using the maximum entropy principle: Applications to stochastic processes, random fields and random matrices, International Journal for Numerical Methods in Engineering, vol.76, pp.1583-1611, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00684517

M. B. Gordy, Computationally convenient distributional assumptions for common-value auctions, Computational Economics, vol.12, issue.1, pp.61-78, 1998.

D. K. Nagar and A. K. Gupta, Matrix-variate kummer-beta distribution, Journal of the Australian Mathematical Society, vol.73, issue.1, pp.11-26, 2002.

P. Koev and A. Edelman, The efficient evaluation of the hypergeometric function of a matrix argument, Math. Comp, vol.75, pp.833-846, 2006.

S. Madireddy, B. Sista, and K. Vemaganti, A bayesian approach to selecting hyperelastic constitutive models of soft tissue, Computer Methods in Applied Mechanics and Engineering, vol.291, pp.102-122, 2015.

P. Miles, M. Hays, R. Smith, and W. Oates, Bayesian uncertainty analysis of finite deformation viscoelasticity, Mechanics of Materials, vol.91, pp.35-49, 2015.

S. Madireddy, B. Sista, and K. Vemaganti, Bayesian calibration of hyperelastic constitutive models of soft tissue, Journal of the mechanical behavior of biomedical materials, vol.59, pp.108-127, 2016.

S. Mashayekhi, P. Miles, M. Y. Hussaini, and W. S. Oates, Fractional viscoelasticity in fractal and non-fractal media: Theory, experimental validation, and uncertainty analysis, Journal of the Mechanics and Physics of Solids, vol.111, pp.134-156, 2018.

E. Roan and K. Vemaganti, The nonlinear material properties of liver tissue determined from no-slip uniaxial compression experiments, Journal of biomechanical engineering, vol.129, issue.3, pp.450-456, 2007.

C. J. Sparrey and T. M. Keaveny, Compression behavior of porcine spinal cord white matter, Journal of biomechanics, vol.44, issue.6, pp.1078-1082, 2011.

G. A. Holzapfel, T. C. Gasser, and R. W. Ogden, A new constitutive framework for arterial wall mechanics and a comparative study of material models, vol.61, pp.1-48, 2000.
URL : https://hal.archives-ouvertes.fr/hal-01297725

M. Skoge, A. Donev, F. H. Stillinger, and S. Torquato, Packing Hyperspheres in HighDimensional Euclidean Spaces, Physical Review E, vol.74, p.41127, 2006.
DOI : 10.1103/physreve.74.041127
URL : http://arxiv.org/pdf/cond-mat/0608362

R. Hill, On constitutive macro-variables for heterogeneous solids at finite strain, Proceedings of the Royal Society of London A, vol.326, pp.131-147, 1972.
DOI : 10.1098/rspa.1972.0001

R. Hill and J. R. Rice, Elastic potentials and the structures of inelastic constitutive laws, Proceedings of the Royal Society of London A, vol.25, issue.3, pp.448-461, 1973.

C. Miehe, J. Schröder, and M. Becker, Computational homogenization analysis in finite elasticity: material and structural instabilities on the micro-and macro-scales of periodic composites and their interaction, Computer Methods in Applied Mechanics and Engineering, vol.191, pp.4971-5005, 2002.

P. Wriggers, Nonlinear Finite Element Methods, 2008.

G. Guennebaud and B. Jacob, , 2010.

N. Wiener, The homogeneous chaos, American Journal of Mathematics, vol.60, pp.897-936, 1938.
DOI : 10.2307/2371268

R. H. Cameron and W. T. Martin, The orthogonal development of non-linear functionals in series of fourier-hermite functionals, Annals of Mathematics, vol.48, issue.2, pp.385-392, 1947.

D. Xiu and G. Karniadakis, The wiener-askey polynomial chaos for stochastic differential equations, SIAM Journal on Scientific Computing, vol.24, pp.619-644, 2002.
DOI : 10.21236/ada460654

P. J. Davis and P. Rabinowitz, Methods of numerical integration. Courier Corporation, 2007.

F. Feyel and J. L. Chaboche, FE 2 multiscale approach for modelling the elastoviscoplastic behaviour of long fiber SiC/Ti composite materials, Computer Methods in Applied Mechanics and Engineering, vol.183, pp.309-330, 2000.

F. Feyel, A multilevel finit element method (FE 2 ) to describe the response of highly nonlinear structures using generalized continua, Computer Methods in Applied Mechanics and Engineering, vol.192, pp.3233-3244, 2003.

M. Mosby and K. Matou?, Hierarchically parallel coupled finite strain multiscale solver for modeling heterogeneous layers, International Journal for Numerical Methods in Engineering, vol.102, pp.748-765, 2015.
DOI : 10.1002/nme.4755

Y. Efendiev, T. Hou, and V. Ginting, Multiscale finite element methods for nonlinear problems and their applications, Communications in Mathematical Sciences, vol.2, issue.4, pp.553-589, 2004.
DOI : 10.4310/cms.2004.v2.n4.a2
URL : http://www.ama.caltech.edu/~hou/papers/MsFEM_nonlinear.pdf

Y. Efendiev and T. Y. Hou, Multiscale Finite Element Methods: Theory and Applications, 2009.

E. Weinan and B. Engquist, The Heterogeneous Multiscale Methods, Communications in Mathematical Sciences, vol.1, issue.1, pp.87-132, 2003.

E. Weinan, B. Engquist, X. Li, W. Ren, and E. Vanden-eijnden, The heterogeneous multiscale method: A review, Communications in Computational Physics, vol.2, issue.4, pp.367-450, 2007.

A. Abdulle and Y. Bai, Adaptive reduced basis finite element heterogeneous multiscale method, Computer Methods in Applied Mechanics and Engineering, vol.257, pp.203-220, 2013.
DOI : 10.1016/j.cma.2013.01.002
URL : https://infoscience.epfl.ch/record/182188/files/adaptive_FE_HMMabd_bai.pdf

A. Abdulle, E. Weinan, B. Engquist, and E. Vanden-eijnden, The heterogeneous multiscale method, Acta Numerica, vol.21, pp.1-87, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00746811

J. Yvonnet and Q. He, The reduced model multiscale method (R3M) for the non-linear homogenization of hyperelastic media at finite strains, Journal of Computational Physics, vol.223, pp.341-368, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00693621

E. Monteiro, J. Yvonnet, and Q. He, Computational homogenization for nonlinear conduction in heterogeneous materials using model reduction, Computational Materials Science, vol.42, pp.704-712, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00692239

J. Yvonnet, D. Gonzalez, and Q. He, Numerically explicit potentials for the homogenization of nonlinear elastic heterogeneous materials, Computer Methods in Applied Mechanics and Engineering, vol.298, pp.2723-2737, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00692234

B. A. Le, J. Yvonnet, and Q. He, Computational homogenization of nonlinear elastic materials using neural networks, International Journal for Numerical Methods in Engineering, vol.104, pp.1061-1084, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01165987

I. Temizer and P. Wriggers, An adaptive method for homogenization in orthotropic nonlinear elasticity, Computer Methods in Applied Mechanics and Engineering, pp.3409-3423, 2007.

I. Temizer and T. I. Zohdi, A numerical method for homogenization in non-linear elasticity, Computational Mechanics, vol.40, issue.2, pp.281-298, 2007.

F. Fritzen and T. Boehlke, Reduced basis homogenization of viscoelastic composites, Science and Technology, vol.76, pp.84-91, 2013.

S. Bhattacharjee and K. Matou?, A nonlinear manifold-based reduced order model for multiscale analysis of heterogeneous hyperelastic materials, Journal of Computational Physics, vol.313, pp.635-653, 2016.

K. Matou?, M. D. Geers, V. G. Kouznetsova, and A. Gillman, A review of predictive nonlinear theories for multiscale modeling of heterogeneous materials, Journal of Computational Physics, vol.330, pp.192-220, 2017.

M. D. Geers, V. G. Kouznetsova, K. Matou?, and J. Yvonnet, Homogenization methods and multiscale modeling: Nonlinear problems. Encyclopedia of Computational Mechanics Second Edition, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01310026

A. Clément, C. Soize, and J. Yvonnet, Une méthode multi-échelles pour l'homogénéisation de matériaux hétérogènes non linéaires, Proceedings of CSMA 2013, 2013.

A. Doostan and H. Owhadi, A non-adapted sparse approximation of PDEs with stochastic inputs, Journal of Computational Physics, vol.230, issue.8, pp.3015-3034, 2011.

C. Miehe, J. Schröder, and J. Schotte, Computational homogenization analysis in finite plasticity simulation of texture development in polycrystalline materials, Computer methods in applied mechanics and engineering, vol.171, issue.3-4, pp.387-418, 1999.

M. Petracca, L. Pelà, R. Rossi, S. Oller, G. Camata et al., Regularization of first order computational homogenization for multiscale analysis of masonry structures, Computational mechanics, vol.57, issue.2, pp.257-276, 2016.

S. Müller, Homogenization of nonconvex integral functionals and cellular elastic materials. Archive for Rational Mechanics and Analysis, vol.99, pp.189-212, 1997.

G. Geymont, S. Müller, and N. Triantafyllidis, Homogenization of nonlinear elastic materials, microscopic bifurcation and macroscopic loss of rank-one convexity, Archive for Rational Mechanics and Analysis, vol.122, pp.231-290, 1993.

R. Avazmohammadi and P. Ponte-castañeda, Macroscopic constitutive relations for elastomers reinforced with short aligned fibers: instabilities and post-bifurcation response, Journal of Mechanics of Physics and Solids, 2015.

J. Bonet and R. D. Wood, Nonlinear continuum mechanics for finite element analysis, 1997.

A. Quarteroni, R. Sacco, and F. Saleri, Numerical mathematics, vol.37, 2010.

M. Arnst and J. Ponthot, An overview of nonintrusive characterization, propagation, and sensitivity analysis of uncertainties in computational mechanics, International Journal for Uncertainty Quantification, vol.4, issue.5, pp.387-421, 2014.

C. Soize and C. Desceliers, Computational aspects for constructing realizations of polynomial chaos in high dimensions, SIAM Journal on Scientific Computing, vol.32, issue.5, pp.2820-2831, 2010.

G. Perrin, C. Soize, D. Duhamel, and C. Funfschilling, Identification of polynomial chaos representations in high dimension from a set of realizations, SIAM Journal on Scientific Computing, vol.34, issue.6, pp.2917-2945, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00770006

O. Lopez-parmis and P. Ponte-castañeda, Second-order estimates for the macroscopic response and loss of ellipcity in porous rubbers at large deformations, J. Elasticity, vol.76, pp.247-287, 2004.

O. Lopez-pamies and P. Ponte-castañeda, On the overall behavior, microstructure evolution, and macroscopic stability in reinforced rubbers at large deformations: I?theory, Journal of the Mechanics and Physics of Solids, vol.54, issue.4, pp.807-830, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00111466

O. Lopez-pamies and P. Ponte-castañeda, On the overall behavior, microstructure evolution, and macroscopic stability in reinforced rubbers at large deformations: Ii?application to cylindrical fibers, Journal of the Mechanics and Physics of Solids, vol.54, issue.4, pp.831-863, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00111467

J. Moraleda, J. Segurado, and J. Llorca, Finite deformation of incompressible fiberreinforced elastomers: a computational micromechanics approach, Journal of the Mechanics and Physics of Solids, vol.57, issue.9, pp.1596-1613, 2009.

V. Bouchart, M. Brieu, N. Bhatnagar, and D. Kondo, A multiscale approach of nonlinear composites under finite deformation: Experimental characterization and numerical modeling, International Journal of Solids and Structures, vol.47, issue.13, pp.1737-1750, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00476454

Z. F. Khisaeva and M. Ostoja-starzewski, On the size of rve in finite elasticity of random composites, Journal of elasticity, vol.85, issue.2, p.153, 2006.

P. G. Ciarlet, The finite element method for elliptic problems, Classics in applied mathematics, vol.40, pp.1-511, 2002.

S. Brenner and R. Scott, The mathematical theory of finite element methods, vol.15, 2007.

B. Staber and J. Guilleminot, Functional approximation and projection of stored energy functions in computational homogenization of hyperelastic materials: A probabilistic perspective, Computer Methods in Applied Mechanics and Engineering, vol.313, pp.1-27, 2017.

A. Cohen, M. A. Davenport, and D. Leviatan, On the stability and accuracy of least squares approximations, Foundations of computational mathematics, vol.13, issue.5, pp.819-834, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01432960

A. Chkifa, A. Cohen, R. Devore, and C. Schwab, Sparse adaptive taylor approximation algorithms for parametric and stochastic elliptic pdes, ESAIM: Mathematical Modelling and Numerical Analysis, vol.47, issue.1, pp.253-280, 2013.
DOI : 10.1051/m2an/2012027
URL : https://www.esaim-m2an.org/articles/m2an/pdf/2013/01/m2an120027.pdf

A. Chkifa, A. Cohen, and C. Schwab, High-dimensional adaptive sparse polynomial interpolation and applications to parametric pdes, Foundations of Computational Mathematics, vol.14, issue.4, pp.601-633, 2014.
DOI : 10.1007/s10208-013-9154-z
URL : https://hal.archives-ouvertes.fr/hal-01350602

A. Chkifa, A. Cohen, and C. Schwab, Breaking the curse of dimensionality in sparse polynomial approximation of parametric pdes, Journal de Mathématiques Pures et Appliquées, vol.103, issue.2, pp.400-428, 2015.
URL : https://hal.archives-ouvertes.fr/hal-00907782

A. Chkifa, A. Cohen, G. Migliorati, F. Nobile, and R. Tempone, Discrete least squares polynomial approximation with random evaluations-application to parametric and stochastic elliptic pdes, ESAIM: Mathematical Modelling and Numerical Analysis, vol.49, issue.3, pp.815-837, 2015.
DOI : 10.1051/m2an/2014050
URL : https://hal.archives-ouvertes.fr/hal-01352276

Y. Lanir, A structural theory for the homogeneous biaxial stress-strain relationships in flat collagenous tissues, Journal of biomechanics, vol.12, issue.6, pp.423-436, 1979.

T. C. Gasser, R. W. Ogden, and G. A. Holzapfel, Hyperelastic modelling of arterial layers with distributed collagen fibre orientations, Journal of the royal society interface, vol.3, issue.6, pp.15-35, 2006.

G. A. Holzapfel and R. W. Ogden, Constitutive modelling of arteries, Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, vol.466, pp.1551-1597, 2010.
DOI : 10.1098/rspa.2010.0058
URL : https://royalsocietypublishing.org/doi/pdf/10.1098/rspa.2010.0058

G. A. Holzapfel, J. A. Niestrawska, R. W. Ogden, A. J. Reinisch, and A. J. Schriefl, Modelling non-symmetric collagen fibre dispersion in arterial walls, Journal of the Royal Society Interface, vol.12, issue.106, p.20150188, 2015.
DOI : 10.1098/rsif.2015.0188
URL : http://rsif.royalsocietypublishing.org/content/12/106/20150188.full.pdf

G. A. Holzapfel and R. W. Ogden, On fiber dispersion models: exclusion of compressed fibers and spurious model comparisons, Journal of Elasticity, vol.129, issue.1-2, pp.49-68, 2017.

S. Hartmann and P. Neff, Polyconvexity of generalized polynomial-type hyperelastic strain energy functions for near-incompressibility, International journal of solids and structures, vol.40, issue.11, pp.2767-2791, 2003.

J. Schröder and P. Neff, Invariant formulation of hyperelastic transverse isotropy based on polyconvex free energy functions, International journal of solids and structures, vol.40, issue.2, pp.401-445, 2003.

D. Balzani, P. Neff, J. Schröder, and G. A. Holzapfel, A polyconvex framework for soft biological tissues. adjustment to experimental data, International journal of solids and structures, vol.43, issue.20, pp.6052-6070, 2006.

D. Brands, A. Klawonn, O. Rheinbach, and J. Schröder, Modelling and convergence in arterial wall simulations using a parallel feti solution strategy, Computer Methods in Biomechanics and Biomedical Engineering, vol.11, issue.5, pp.569-583, 2008.

D. Balzani, D. Brands, A. Klawonn, O. Rheinbach, and J. Schröder, On the mechanical modeling of anisotropic biological soft tissue and iterative parallel solution strategies, Archive of Applied Mechanics, vol.80, issue.5, pp.479-488, 2010.

D. Balzani, D. Böse, D. Brands, R. Erbel, A. Klawonn et al., Parallel simulation of patient-specific atherosclerotic arteries for the enhancement of intravascular ultrasound diagnostics, Engineering Computations, vol.29, issue.8, pp.888-906, 2012.

S. Brinkhues, A. Klawonn, O. Rheinbach, and J. Schröder, Augmented lagrange methods for quasi-incompressible materials : Applications to soft biological tissue, International journal for numerical methods in biomedical engineering, vol.29, issue.3, pp.332-350, 2013.

C. Augustin, G. A. Holzapfel, and O. Steinbach, Classical and all-floating feti methods for the simulation of arterial tissues, International journal for numerical methods in engineering, vol.99, issue.4, pp.290-312, 2014.

J. Schröder and P. Neff, Poly-, quasi-and rank-one convexity in applied mechanics, vol.516, 2010.

P. J. Flory, Thermodynamic relations for high elastic materials, Transactions of the Faraday Society, vol.57, pp.829-838, 1961.

E. Chow and Y. Saad, Preconditioned krylov subspace methods for sampling multivariate gaussian distributions, SIAM Journal on Scientific Computing, vol.36, issue.2, pp.588-608, 2014.

M. Shinozuka, Simulation of multivariate and multidimensional random processes, The Journal of the Acoustical Society of America, vol.49, issue.1B, pp.357-368, 1971.

F. Lindgren, H. Rue, and J. Lindström, An explicit link between gaussian fields and gaussian markov random fields: the stochastic partial differential equation approach, Journal of the Royal Statistical Society: Series B (Statistical Methodology), vol.73, issue.4, pp.423-498, 2011.

G. A. Fuglstad, D. Simpson, F. Lindgren, and H. Rue, Does non-stationary spatial data always require non-stationary random fields?, Spatial Statistics, vol.14, pp.505-531, 2015.

G. Fuglstad, F. Lindgren, D. Simpson, and H. Rue, Exploring a new class of nonstationary spatial gaussian random fields with varying local anisotropy, Statistica Sinica, pp.115-133, 2015.

H. Rue and L. Held, Gaussian Markov random fields: theory and applications, 2005.

G. A. Holzapfel, G. Sommer, and P. Regitnig, Anisotropic mechanical properties of tissue components in human atherosclerotic plaques, Journal of biomechanical engineering, vol.126, issue.5, pp.657-665, 2004.

P. Hauseux, J. S. Hale, and S. Bordas, Accelerating monte carlo estimation with derivatives of high-level finite element models, Computer Methods in Applied Mechanics and Engineering, vol.318, pp.917-936, 2017.

J. D. Humphrey, Mechanics of the arterial wall: Review and directions, Critical reviews in biomedical engineering, vol.23, pp.1-162, 1995.

G. A. Holzapfel and R. W. Ogden, Mechanics of biological tissue, 2006.

S. Ghazanfari, A. Driessen-mol, G. J. Strijkers, F. M. Kanters, F. P. Baaijens et al., A comparative analysis of the collagen architecture in the carotid artery: second harmonic generation versus diffusion tensor imaging, Biochemical and biophysical research communications, vol.426, issue.1, pp.54-58, 2012.

R. Rezakhaniha, A. Agianniotis, J. T. Schrauwen, A. Griffa, D. Sage et al., Experimental investigation of collagen waviness and orientation in the arterial adventitia using confocal laser scanning microscopy, Biomechanics and modeling in mechanobiology, vol.11, issue.3-4, pp.461-473, 2012.

S. Polzer, T. C. Gasser, K. Novak, V. Man, M. Tichy et al., Structurebased constitutive model can accurately predict planar biaxial properties of aortic wall tissue, Acta biomaterialia, vol.14, pp.133-145, 2015.

P. Sáez, A. García, E. Peña, T. C. Gasser, and M. A. Martínez, Microstructural quantification of collagen fiber orientations and its integration in constitutive modeling of the porcine carotid artery, Acta biomaterialia, vol.33, pp.183-193, 2016.

L. Azinfar, M. Ravanfar, Y. Wang, K. Zhang, D. Duan et al., High resolution imaging of the fibrous microstructure in bovine common carotid artery using optical polarization tractography, Journal of biophotonics, vol.10, issue.2, pp.231-241, 2017.

, Blausen.com staff. Medical gallery of Blausen Medical, 2014.

A. J. Schriefl, H. Wolinski, P. Regitnig, S. D. Kohlwein, and G. A. Holzapfel, An automated approach for three-dimensional quantification of fibrillar structures in optically cleared soft biological tissues, Journal of The Royal Society Interface, vol.10, issue.80, 2013.

G. A. Holzapfel, Determination of material models for arterial walls from uniaxial extension tests and histological structure, Journal of theoretical biology, vol.238, issue.2, pp.290-302, 2006.
URL : https://hal.archives-ouvertes.fr/hal-01299856

H. C. Stary, An atlas of atherosclerosis progression and regression, 1999.

P. D. Ballyk, C. Walsh, J. Butany, and M. Ojha, Compliance mismatch may promote graft-artery intimal hyperplasia by altering suture-line stresses, Journal of biomechanics, vol.31, issue.3, pp.229-237, 1997.

F. Nappi, A. R. Carotenuto, A. Cutolo, P. Fouret, C. Acar et al., Compliance mismatch and compressive wall stresses drive anomalous remodelling of pulmonary trunks reinforced with dacron grafts, Journal of the mechanical behavior of biomedical materials, vol.63, pp.287-302, 2016.

G. R. Joldes, K. Miller, A. Wittek, and B. Doyle, A simple, effective and clinically applicable method to compute abdominal aortic aneurysm wall stress, Journal of the mechanical behavior of biomedical materials, vol.58, pp.139-148, 2016.

. Aneurisk-team, AneuriskWeb project website, 2012.

E. Marchandise, C. Geuzaine, and J. Remacle, Cardiovascular and lung mesh generation based on centerlines, International journal for numerical methods in biomedical engineering, vol.29, issue.6, pp.665-682, 2013.

L. Antiga, M. Piccinelli, L. Botti, B. Ene-iordache, A. Remuzzi et al., An image-based modeling framework for patient-specific computational hemodynamics, Medical & biological engineering & computing, vol.46, issue.11, p.1097, 2008.

C. Geuzaine and J. Remacle, Gmsh: A 3-d finite element mesh generator with built-in pre-and post-processing facilities, International journal for numerical methods in engineering, vol.79, issue.11, pp.1309-1331, 2009.

J. D. Bayer, R. C. Blake, G. Plank, and N. A. Trayanova, A novel rule-based algorithm for assigning myocardial fiber orientation to computational heart models, Annals of biomedical engineering, vol.40, issue.10, pp.2243-2254, 2012.

M. Grigoriu, Probabilistic models for stochastic elliptic partial differential equations, Journal of Computational Physics, vol.229, pp.8406-8429, 2010.

M. Grigoriu, Microstructure models and material response by extreme value theory, SIAM/ASA Journal on Uncertainty Quantification, vol.4, issue.1, pp.190-217, 2016.

M. Ostoja-starzewski, Microstructural Randomness and Scaling in Mechanics of Materials, 2008.

C. Soize, Random matrix theory for modeling uncertainties in computational mechanics, Computer methods in applied mechanics and engineering, vol.194, pp.1333-1366, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00686187

R. Balian, Random matrices and information theory, Il Nuovo Cimento B, vol.57, issue.1, pp.183-193, 1965.

T. Le, J. Guilleminot, and C. Soize, Stochastic continuum modeling of random interphases from atomistic simulations. application to a polymer nanocomposite, Computer Methods in Applied Mechanics and Engineering, vol.303, pp.430-449, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01158280

J. C. Nagtegaal, D. M. Parks, and J. R. Rice, On numerically accurate finite element solutions in the fully plastic range, Computer methods in applied mechanics and engineering, vol.4, issue.2, pp.153-177, 1974.

J. C. Simo, R. L. Taylor, and K. S. Pister, Variational and projection methods for the volume constraint in finite deformation elasto-plasticity, Computer methods in applied mechanics and engineering, vol.51, issue.1-3, pp.177-208, 1985.

J. C. Simo and R. L. Taylor, Quasi-incompressible finite elasticity in principal stretches. continuum basis and numerical algorithms, Computer methods in applied mechanics and engineering, vol.85, issue.3, pp.273-310, 1991.

M. Heroux, R. Bartlett, V. Howle, R. Hoekstra, J. Hu et al., An overview of the trilinos project, ACM Transactions on Mathematical Software (TOMS), vol.31, issue.3, pp.397-423, 2005.

M. Heroux and J. M. Willenbring, A new overview of the trilinos project. Scientific Programming, vol.20, pp.83-88, 2012.