L. Russo, The Forgotten Revolution. How Science Was Born in 300 BC and Why it Had to be Reinvented, ? Ubersetzung aus dem Italienischen von Silvio Levy, 2004.

P. Germain, The Method of Virtual Power in Continuum Mechanics. Part 2: Microstructure, SIAM J. Appl. Math, vol.25, issue.3, pp.556-575, 1973.

G. Maugin and C. Trimarco, Pseudomomentum and Material Forces in Nonlinear Elasticity: Variational Formulations and Application to Brittle Fracture, Acta Mech, vol.94, pp.1-28, 1992.

G. A. Maugin and C. Trimarco, Note on a Mixed Variational Principle in Finite Elasticity, Atti Accad. Naz. Lincei, Cl. Sci. Fis., Mat. Nat., Rend. Lincei, Mat. Appl, vol.3, issue.1, pp.69-74, 1992.

V. I. Arnold, Mathematical Methods of Classical Mechanics, vol.60, 1989.

G. Maugin, The Method of Virtual Power in Continuum Mechanics: Application to Coupled Fields, Acta Mech, vol.35, pp.1-70, 1980.

R. A. Toupin, Saint-Venant's Principle, Arch. Ration. Mech. Anal, vol.18, issue.2, pp.83-96, 1965.

H. M?-uhlhaus, A. , and E. , A Variational Principle for Gradient Plasticity, Int. J. Solids Struct, vol.28, issue.7, pp.845-857, 1991.

D. G. Edelen, Non-Local Variational Mechanics Variational Imbedding, Adjoint Theorems and Existence, Int. J. Eng. Sci, vol.7, issue.4, pp.401-415, 1969.

F. Dell'isola, P. , and L. , Variational Principles are a Powerful Tool Also for Formulating Field Theories, Variational Models and Methods in Solid and Fluid Mechanics, 2012.

N. Kirchner and P. Steinmann, A Unifying Treatise on Variational Principles for Gradient and Micromorphic Continua, Philos. Mag, vol.85, pp.3875-3895, 2005.

L. Placidi, A Variational Approach for a Nonlinear One-Dimensional Damage-Elasto-Plastic Second-Gradient Continuum Model, Continuum Mech. Thermodyn

L. Placidi, A Variational Approach for a Nonlinear 1-Dimensional Second Gradient Continuum Damage Model, Continuum Mech. Thermodyn, vol.27, pp.623-638

R. Rahouadj, J. Ganghoffer, C. , and C. , A Thermodynamic Approach With Internal Variables Using Lagrange Formalism. Part I: General Framework, Mech. Res. Commun, vol.30, issue.2, pp.109-117, 2003.

V. A. Eremeyev, P. , and W. , The Nonlinear Theory of Elastic Shells With Phase Transitions, J. Elasticity, vol.74, issue.1, pp.67-86, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00831721

R. Rahouadj, J. Ganghoffer, C. , and C. , A Thermodynamic Approach With Internal Variables Using Lagrange Formalism. Part II. Continuous Symmetries in the Case of the Time-Temperature Equivalence, Mech. Res. Commun, vol.30, issue.2, pp.119-123, 2003.

J. Ganghoffer, Extremum Principles for Biological Continuous Bodies Undergoing Volumetric and Surface Growth, Bull. Pol. Acad. Sci, vol.60, issue.2, pp.259-263, 2012.

H. Serrano, A Variational Approach to the Homogenization of Laminate Metamaterials, Nonlinear Anal, vol.18, pp.75-85, 2014.

J. F. De?-u, W. Larbi, and R. Ohayon, Piezoelectric Structural Acoustic Problems: Symmetric Variational Formulations and Finite Element Results, Comp. Meth. Appl. Mech. Eng, vol.197, issue.19, pp.1715-1724, 2008.

H. Altenbach, V. A. Eremeyev, and L. P. Lebedev, On the Existence of Solution in the Linear Elasticity With Surface Stresses, J. Appl. Math. Mech./Z. Angew. Math. Mech, vol.90, issue.3, pp.231-240, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00824093

H. Altenbach, V. A. Eremeyev, and L. P. Lebedev, On the Spectrum and Stiffness of an Elastic Body With Surface Stresses, J. Appl. Math. Mech./Z. Angew. Math. Mech, vol.91, issue.9, pp.699-710, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00824109

V. A. Eremeyev and L. P. Lebedev, Mathematical Study of Boundary-Value Problems Within the Framework of Steigmann-Ogden Model of Surface Elasticity, Continuum Mech. Thermodyn, 2015.

V. A. Eremeyev and L. P. Lebedev, Existence Theorems in the Linear Theory of Micropolar Shells, J. Appl. Math. Mech./Z. Angew. Math. Mech, vol.91, issue.6, pp.468-476, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00831156

V. A. Eremeyev and L. P. Lebedev, Existence of Weak Solutions in Elasticity, Math. Mech. Solids, vol.18, issue.2, pp.204-217, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00831088

M. Ortiz and L. Stainier, The Variational Formulation of Viscoplastic Constitutive Updates, Comput. Methods Appl. Mech. Eng, vol.171, issue.3, pp.419-444, 1999.
URL : https://hal.archives-ouvertes.fr/hal-01007379

C. Liu, F. Li, L. Ma, and H. Cheng, Advanced Materials for Energy Storage, Adv. Mater, vol.22, issue.8, pp.28-62, 2010.

F. Caruso, Nanoengineering of Particle Surfaces, Adv. Mater, vol.13, issue.1, pp.11-22, 2001.
DOI : 10.1002/1521-4095(200101)13:1<11::aid-adma11>3.0.co;2-n

J. N. Coleman, U. Khan, and Y. K. Gun&apos;ko, Mechanical Reinforcement of Polymers Using Carbon Nanotubes, Adv. Mater, vol.18, issue.6, pp.689-706, 2006.

P. T. Hammond, Form and Function in Multilayer Assembly: New Applications at the Nanoscale, Adv. Mater, vol.16, issue.15, pp.1271-1293, 2004.

N. Fleck, V. Deshpande, A. , and M. , Micro-Architectured Materials: Past, Present and Future, Proc. R. Soc. London A, vol.466, pp.2495-2516, 2010.
DOI : 10.1098/rspa.2010.0215

URL : http://rspa.royalsocietypublishing.org/content/466/2121/2495.full.pdf

J. W. Dunlop and P. Fratzl, Multilevel Architectures in Natural Materials, Scr. Mater, vol.68, issue.1, pp.8-12, 2013.
DOI : 10.1016/j.scriptamat.2012.05.045

Y. Brechet and J. Embury, Architectured Materials: Expanding Materials Space, Scr. Mater, vol.68, issue.1, pp.1-3, 2013.
DOI : 10.1016/j.scriptamat.2012.07.038

URL : https://hal.archives-ouvertes.fr/hal-00933923

O. Bouaziz, Y. Brechet, and J. Embury, Heterogeneous and Architectured Materials: A Possible Strategy for Design of Structural Materials, Adv. Eng. Mater, vol.10, issue.1-2, pp.24-36, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00358408

P. Bollen, N. Qui-evy, I. Huynen, C. Bailly, C. Detrembleur et al., Multifunctional Architectured Materials for Electromagnetic Absorption, Scr. Mater, vol.68, issue.1, pp.50-54, 2013.
DOI : 10.1016/j.scriptamat.2012.05.011

M. Ashby, Designing Architectured Materials, Scr. Mater, vol.68, issue.1, pp.4-7, 2013.
DOI : 10.1016/j.scriptamat.2012.04.033

M. Ashby and Y. Brechet, Designing Hybrid Materials, Acta Mater, vol.51, issue.19, pp.5801-5821, 2003.

E. Griesshaber, W. W. Schmahl, R. Neuser, T. Pettke, M. Bl?-um et al., Crystallographic Texture and Microstructure of Terebratulide Brachiopod Shell Calcite: An Optimized Materials Design With Hierarchical Architecture, Am. Mineral, vol.92, pp.722-734, 2007.

R. Bruchhaus, M. Honal, R. Symanczyk, K. , and M. , Selection of Optimized Materials for CBRAM Based on HT-XRD and Electrical Test Results, J. Electrochem. Soc, vol.156, issue.9, pp.729-733, 2009.

O. Vetterl, F. Finger, R. Carius, P. Hapke, L. Houben et al., Intrinsic Microcrystalline Silicon: A New Material for Photovoltaics, Sol. Energy Mater. Sol. Cells, vol.62, issue.1, pp.97-108, 2000.
DOI : 10.1016/s0927-0248(99)00140-3

N. I. Zheludev, The Road Ahead for Metamaterials, Science, vol.328, issue.5978, pp.582-583, 2010.
DOI : 10.1126/science.1186756

J. Ju, J. D. Summers, J. Ziegert, and G. Fadel, Design of Honeycomb Meta-Materials for High Shear Flexure, 2009.

, Applied Mechanics Reviews, vol.67, pp.60804-60819, 2015.

N. Engheta and R. W. Ziolkowski, Metamaterials: Physics and Engineering Explorations, 2006.

D. Vescovo, D. , G. , and I. , Dynamic Problems for Metamaterials: Review of Existing Models and Ideas for Further Research, Int. J. Eng. Sci, vol.80, issue.SI, pp.153-172, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00947477

G. Milton and P. Seppecher, A Metamaterial Having a Frequency Dependent Elasticity Tensor and a Zero Effective Mass Density, Phys. Status Solidi (B), issue.7, pp.1412-1414, 2012.
DOI : 10.1002/pssb.201084214

URL : https://hal.archives-ouvertes.fr/hal-01293275

I. Kang, Y. Y. Heung, J. H. Kim, J. W. Lee, R. Gollapudi et al., Introduction to Carbon Nanotube and Nanofiber Smart Materials, Composites, Part B, vol.37, issue.6, pp.382-394, 2006.
DOI : 10.1016/j.compositesb.2006.02.011

Z. L. Wang, Functional and Smart Materials, Wiley Online Library, 1998.

V. Giurgiutiu, Review of Smart-Materials Actuation Solutions for Aeroelastic and Vibration Control, J. Intell. Mater. Syst. Struct, vol.11, issue.7, pp.525-544, 2000.

Y. Song, W. Wei, and X. Qu, Colorimetric Biosensing Using Smart Materials, Adv. Mater, vol.23, issue.37, pp.4215-4236, 2011.

I. Chopra, Review of State of Art of Smart Structures and Integrated Systems, AIAA J, vol.40, issue.11, pp.2145-2187, 2002.

F. Vernerey, W. K. Liu, and B. Moran, Multi-Scale Micromorphic Theory for Hierarchical Materials, J. Mech. Phys. Solids, vol.55, issue.12, pp.2603-2651, 2007.

F. Nicot, F. Darve, and R. Group, A Multi-Scale Approach to Granular Materials, Mech. Mater, vol.37, issue.9, pp.980-1006, 2005.

D. Bentz, Influence of Silica Fume on Diffusivity in Cement-Based Materials: II. Multi-Scale Modeling of Concrete Diffusivity, Cem. Concr. Res, vol.30, issue.7, pp.1121-1129, 2000.

T. Fast, S. R. Niezgoda, and S. R. Kalidindi, A New Framework for Computationally Efficient Structure-Structure Evolution Linkages to Facilitate High-Fidelity Scale Bridging in Multi-Scale Materials Models, Acta Mater, vol.59, issue.2, pp.699-707, 2011.

S. Hao, B. Moran, W. K. Liu, and G. B. Olson, A Hierarchical Multi-Physics Model for Design of High Toughness Steels, J. Comput. Aided Mater. Des, vol.10, issue.2, pp.99-142, 2003.

R. De-borst, Challenges in Computational Materials Science: Multiple Scales, Multi-Physics and Evolving Discontinuities, vol.43, pp.1-15, 2008.

R. Hamilton, D. Mackenzie, L. , and H. , Multi-Physics Simulation of Friction Stir Welding Process, Eng. Comput, vol.27, issue.8, pp.967-985, 2010.

V. Eremeyev, P. , and W. , Phase Transitions in Thermoelastic and Thermoviscoelastic Shells, Arch. Mech, vol.61, issue.1, pp.41-67, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00826796

V. Eremeyev, P. , and W. , Thermomechanics of Shells Undergoing Phase Transition, J. Mech. Phys. Solids, issue.7, pp.1395-1412, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00835667

W. Pietraszkiewicz, V. Eremeyev, and V. Konopi-nska, Extended Non-Linear Relations of Elastic Shells Undergoing Phase Transitions, Z. Angew. Math. Mech, vol.87, issue.2, pp.150-159, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00831047

G. Piccardo and G. Solari, 3D Wind-Excited Response of Slender Structures: Closed-Form Solution, J. Struct. Eng, vol.126, issue.8, pp.936-943, 2000.

G. Piccardo, A Methodology for the Study of Coupled Aeroelastic Phenomena, J. Wind Eng. Ind. Aerodyn, vol.48, issue.2, pp.241-252, 1993.

R. G. De-villoria, N. Yamamoto, A. Miravete, and B. L. Wardle, Multi-Physics Damage Sensing in Nano-Engineered Structural Composites, Nanotechnology, vol.22, issue.18, p.185502, 2011.

S. Alessandroni, U. Andreaus, F. Isola, and M. Porfiri, PiezoElectromechanical (PEM) Kirchhoff-Love Plates, Eur. J. Mech. A, vol.23, issue.4, pp.689-702, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00496930

L. Placidi and K. Hutter, Thermodynamics of Polycrystalline Materials Treated by the Theory of Mixtures With Continuous Diversity, Continuum Mech. Thermodyn, vol.17, issue.6, pp.409-451, 2006.

U. Andreaus and M. Porfiri, Effect of Electrical Uncertainties on Resonant Piezoelectric Shunting, J. Intell. Mater. Syst. Struct, vol.18, issue.5, pp.477-485, 2007.

D. Kim, J. Song, W. M. Choi, H. Kim, R. Kim et al., Materials and Noncoplanar Mesh Designs for Integrated Circuits With Linear Elastic Responses to Extreme Mechanical Deformations, Proc. Natl. Acad. Sci, vol.105, issue.48, pp.18675-18680, 2008.

S. C. Mannsfeld, B. C. Tee, R. M. Stoltenberg, C. V. Chen, S. Barman et al., Highly Sensitive Flexible Pressure Sensors With Microstructured Rubber Dielectric Layers, Nat. Mater, vol.9, issue.10, pp.859-864, 2010.
DOI : 10.1038/nmat2834

C. Maurini, J. Pouget, and F. Isola, On a Model of Layered Piezoelectric Beams Including Transverse Stress Effect, Int. J. Solids Struct, vol.41, issue.16, pp.4473-4502, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00503237

R. Lakes, Advances in Negative Poisson's Ratio Materials, Adv. Mater, vol.5, issue.4, pp.293-296, 1993.

R. Lakes and W. Drugan, Dramatically Stiffer Elastic Composite Materials Due to a Negative Stiffness Phase?, J. Mech. Phys. Solids, vol.50, issue.5, pp.979-1009, 2002.

T. Jaglinski, D. Kochmann, D. Stone, and R. Lakes, Composite Materials With Viscoelastic Stiffness Greater Than Diamond, Science, vol.315, issue.5812, pp.620-622, 2007.
DOI : 10.1126/science.1135837

K. Bertoldi, P. M. Reis, S. Willshaw, and T. Mullin, Negative Poisson's Ratio Behavior Induced by an Elastic Instability, Adv. Mat, vol.22, issue.3, pp.361-366, 2010.
DOI : 10.1002/adma.200901956

URL : https://dash.harvard.edu/bitstream/1/11051225/1/Bertoldi_Advanced_Materials_Final.pdf

L. Kashdan, C. Conner-seepersad, M. Haberman, W. , and P. S. , Design, Fabrication, and Evaluation of Negative Stiffness Elements Using SLS, Rapid Prototyping J, vol.18, issue.3, pp.194-200, 2012.
DOI : 10.1108/13552541211218108

G. W. Milton, The Theory of Composites, Cambridge Monographs on Applied and Computational Mathematics, 2002.

H. Nikopour and A. Selvadurai, Torsion of a Layered Composite Strip, Compos. Struct, vol.95, pp.1-4, 2013.

H. Nikopour and A. Selvadurai, Concentrated Loading of a FibreReinforced Composite Plate: Experimental and Computational Modeling of Boundary Fixity, Composites, Part B, vol.60, pp.297-305, 2014.

L. Placidi and K. Hutter, An Anisotropic Flow Law for Incompressible Polycrystalline Materials, Z. Angew. Math. Phys, vol.57, issue.1, pp.160-181, 2005.
DOI : 10.1007/s00033-005-0008-7

A. Selvadurai and H. Nikopour, Transverse Elasticity of a Unidirectionally Reinforced Composite With an Irregular Fibre Arrangement: Experiments, Theory and Computations, Compos. Struct, vol.94, issue.6, pp.1973-1981, 2012.

C. B. Arnold, P. Serra, and A. Piqu-e, Laser Direct-Write Techniques for Printing of Complex Materials, MRS Bull, vol.32, issue.1, pp.23-31, 2007.

Y. V. Pershin, D. Ventra, and M. , Memory Effects in Complex Materials and Nanoscale Systems, Adv. Phys, vol.60, issue.2, pp.145-227, 2011.
DOI : 10.1080/00018732.2010.544961

URL : http://arxiv.org/pdf/1011.3053

T. Proffen, S. Billinge, T. Egami, and D. Louca, Structural Analysis of Complex Materials Using the Atomic Pair Distribution Function-A Practical Guide, Z. Kristallogr./Int. J. Struct. Phys. Chem. Aspects Cryst. Mater, vol.218, issue.2, pp.132-143, 2003.

A. Grillo, S. Federico, and G. Wittum, Growth, Mass Transfer, and Remodeling in Fiber-Reinforced, Multi-Constituent Materials, vol.47, pp.388-401, 2012.
DOI : 10.1016/j.ijnonlinmec.2011.09.026

A. Grillo, S. Federico, G. Wittum, S. Imatani, G. Giaquinta et al., Evolution of a Fibre-Reinforced Growing Mixture, Nuovo Cimento C, vol.32, issue.1, pp.97-119, 2009.

A. Grillo and G. Wittum, Growth and Mass Transfer in MultiConstituent Biological Materials, AIP Conf. Proc, vol.1281, issue.1, pp.355-358, 2010.
DOI : 10.1063/1.3498474

H. Seddik, R. Greve, T. Zwinger, P. , and L. , A Full Stokes Ice Flow Model for the Vicinity of Dome Fuji, Antarctica, With Induced Anisotropy and Fabric Evolution, Cryosphere, vol.5, issue.2, pp.495-508, 2011.

A. V. Porubov, E. L. Aero, A. , and B. , Dynamic Properties of Essentially Nonlinear Generalized Continua, Mechanics of Generalized Continua, pp.161-168, 2010.

S. Forest, Mechanics of Generalized Continua: Construction by Homogenization, J. Phys. IV, vol.8, issue.PR4, pp.4-39, 1998.

G. A. Maugin and A. V. Metrikine, Mechanics of Generalized Continua, Advances in Mechanics and Mathematics, vol.21, 2010.

C. Teko-glu and P. R. Onck, Size Effects in Two-Dimensional Voronoi Foams: A Comparison Between Generalized Continua and Discrete Models, J. Mech. Phys. Solids, vol.56, issue.12, pp.3541-3564, 2008.

S. Forest, T. , and D. K. , Generalized Continua and NonHomogeneous Boundary Conditions in Homogenisation Methods, ZAMM, vol.91, issue.2, pp.90-109, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00585332

C. Boutin, S. Hans, C. , and C. , Generalized Beams and Continua. Dynamics of Reticulated Structures, Mechanics of Generalized Continua, pp.131-141, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00941153

F. Feyel, A Multilevel Finite Element Method (FE 2) to Describe the Response of Highly Non-Linear Structures Using Generalized Continua, Comput. Methods Appl. Mech. Eng, vol.192, issue.28, pp.3233-3244, 2003.

S. Forest and R. Sievert, Elastoviscoplastic Constitutive Frameworks for Generalized Continua, Acta Mechanica, vol.160, issue.1-2, pp.71-111, 2003.

A. Green and P. Naghdi, A Unified Procedure for Construction of Theories of Deformable Media. II. Generalized Continua, Proc. R. Soc. London A, vol.448, pp.357-377, 1934.

A. C. Eringen, Theory of Micropolar Fluids, DTIC Document, 1965.

A. C. Eringen and E. Suhubi, Nonlinear Theory of Simple MicroElastic Solidsi, Int. J. Eng. Sci, vol.2, issue.2, pp.189-203, 1964.

A. C. Eringen, Theory of Micropolar Elasticity, Microcontinuum Field Theories, pp.101-248, 1999.

R. D. Mindlin, Micro-Structure in Linear Elasticity, Arch. Ration. Mech. Anal, vol.16, issue.1, pp.51-78, 1964.

A. C. Eringen, Microcontinuum Field Theories: I. Foundations and Solids, 2012.

P. Neff, I. Ghiba, A. Madeo, L. Placidi, R. et al., A Unifying Perspective: The Relaxed Linear Micromorphic Continuum, Continuum Mech. Thermodyn, vol.26, issue.5, pp.639-681, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01167202

P. Neff, On Material Constants for Micromorphic Continua, XIVth International Symposium on Trends in Applications of Mathematics to Mechanics (STAMM'2004), pp.337-348, 2004.

A. Misra and V. Singh, Micromechanical Model for ViscoelasticMaterials Undergoing Damage, Continuum Mech. Thermodyn, vol.25, issue.2, pp.1-16, 2013.

A. Misra, Y. , and Y. , Micromechanical Model for Cohesive Materials Based Upon Pseudo-Granular Structure, Int. J. Solids Struct, vol.47, issue.21, pp.2970-2981, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00556078

L. Contrafatto, M. Cuomo, and F. Fazio, An Enriched Finite Element for Crack Opening and Rebar Slip in Reinforced Concrete Members, Int. J. Fract, vol.178, issue.1-2, pp.33-50, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00874576

D. Scerrato, I. Giorgio, A. Della-corte, A. Madeo, and A. Limam, A Micro-Structural Model for Dissipation Phenomena in the Concrete, Int. J. Numer. Anal. Methods Geomech, vol.39, issue.18, pp.2037-2052, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01194317

D. Scerrato, I. Giorgio, A. Madeo, A. Limam, D. et al., A Simple Non-Linear Model for Internal Friction in Modified Concrete, Int. J. Eng. Sci, vol.80, issue.SI, pp.136-152, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01953965

C. Boutin, Microstructural Effects in Elastic Composites, Int. J. Solids Struct, vol.33, issue.7, pp.1023-1051, 1996.
DOI : 10.1016/0020-7683(95)00089-5

URL : https://hal.archives-ouvertes.fr/hal-00940462

A. C. Eringen, Mechanics of Micromorphic Continua, 1968.
DOI : 10.1007/978-3-662-30257-6_2

Y. Br-echet, Microstructures, Mechanical Properties and Processes, 2000.

T. Leismann and R. Mahnken, Comparison of Micromorphic, Micropolar and Microstrain Continua, 86th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2015), p.58, 2015.
DOI : 10.1016/j.ijnonlinmec.2015.08.004

D. Kim, J. Brunski, and D. Nicolella, Microstrain Fields for Cortical Bone in Uniaxial Tension: Optical Analysis Method, Proc. Inst. Mech. Eng., Part H, vol.219, issue.2, pp.119-128, 2005.
DOI : 10.1243/095441105x9291

Y. Yang and A. Misra, Micromechanics Based Second Gradient Continuum Theory for Shear Band Modeling in Cohesive Granular Materials Following Damage Elasticity, Int. J. Solids Struct, vol.49, issue.18, pp.2500-2514, 2012.
DOI : 10.1016/j.ijsolstr.2012.05.024

URL : https://doi.org/10.1016/j.ijsolstr.2012.05.024

Y. Yang, W. Ching, and A. Misra, Higher-Order Continuum Theory Applied to Fracture Simulation of Nanoscale Intergranular Glassy Film, J. Nanomech. Micromech, vol.1, issue.2, pp.60-71, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00556184

P. Seppecher, Second-Gradient Theory: Application to Cahn-Hilliard Fluids, Continuum Thermomechanics, pp.379-388, 2002.
DOI : 10.1007/0-306-46946-4_29

J. Alibert, P. Seppecher, and F. Isola, Truss Modular Beams With Deformation Energy Depending on Higher Displacement Gradients, Math. Mech. Solids, vol.8, issue.1, pp.51-73, 2003.
DOI : 10.1177/1081286503008001658

URL : https://hal.archives-ouvertes.fr/hal-00497327

P. Neff, K. Che?mi-nski, A. , and H. , Notes on Strain Gradient Plasticity: Finite Strain Covariant Modelling and Global Existence in the Infinitesimal Rate-Independent Case, Math. Models Methods Appl. Sci, vol.19, issue.2, pp.307-346, 2009.

L. Placidi, G. Rosi, I. Giorgio, and A. Madeo, Reflection and Transmission of Plane Waves at Surfaces Carrying Material Properties and Embedded in Second-Gradient Materials, Math. Mech. Solids, vol.19, issue.5, pp.555-578, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01167200

H. Askes, A. Suiker, and L. Sluys, A Classification of Higher-Order Strain-Gradient Models-Linear Analysis, Arch. Appl. Mech, vol.72, issue.2-3, pp.171-188, 2002.

A. Rinaldi, P. , and L. , A Microscale Second Gradient Approximation of the Damage Parameter of Quasi-Brittle Heterogeneous Lattices, Z. Angew. Math. Mech./J. Appl. Math. Mech, vol.94, issue.10, pp.862-877, 2013.

M. Iordache and K. Willam, Localized Failure Analysis in Elastoplastic Cosserat Continua, Comput. Methods Appl. Mech. Eng, vol.151, issue.3, pp.559-586, 1998.

P. Peric´, D. Yu, J. , O. , and D. , On Error Estimates and Adaptivity in Elastoplastic Solids: Applications to the Numerical Simulation of Strain Localization in Classical and Cosserat Continua, Int. J. Numer. Methods Eng, vol.37, issue.8, pp.1351-1379, 1994.

W. Ehlers, E. Ramm, S. Diebels, D. , and G. , From Particle Ensembles to Cosserat Continua: Homogenization of Contact Forces Towards Stresses and Couple Stresses, Int. J. Solids Struct, vol.40, issue.24, pp.6681-6702, 2003.

H. Neuber, On the General Solution of Linear-Elastic Problems in Isotropic and Anisotropic Cosserat Continua, Applied Mechanics, pp.153-158, 1966.

A. Dietsche and K. Willam, Boundary Effects in Elasto-Plastic Cosserat Continua, Int. J. Solids Struct, vol.34, issue.7, pp.877-893, 1997.
DOI : 10.1016/s0020-7683(96)00098-4

D. Ies¸anies¸an, A Theory of Thermoviscoelastic Composites Modelled as Interacting Cosserat Continua, J. Therm. Stresses, vol.30, issue.12, pp.1269-1289, 2007.

W. Pietraszkiewicz and V. Eremeyev, On Vectorially Parameterized Natural Strain Measures of the Non-Linear Cosserat Continuum, Int. J. Solids Struct, vol.46, issue.11, pp.2477-2480, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00831060

J. Altenbach, H. Altenbach, and V. A. Eremeyev, On Generalized Cosserat-Type Theories of Plates and Shells: A Short Review and Bibliography, Arch. Appl. Mech, vol.80, issue.1, pp.73-92, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00827365

P. Steinmann and E. Stein, A Unifying Treatise of Variational Principles for Two Types of Micropolar Continua, Acta Mech, vol.121, issue.1-4, pp.215-232, 1997.

V. A. Eremeyev, P. , and W. , Material Symmetry Group and Constitutive Equations of Micropolar Anisotropic Elastic Solids, Math. Mech. Solids, epub

V. A. Eremeyev, P. , and W. , Material Symmetry Group of the Non-Linear Polar-Elastic Continuum, Int. J. Solids Struct, vol.49, issue.14, pp.1993-2005, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00835636

W. Pietraszkiewicz and V. Eremeyev, On Natural Strain Measures of the Non-Linear Micropolar Continuum, Int. J. Solids Struct, vol.46, issue.3, pp.774-787, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00835661

R. J?-anicke, S. Diebels, H. Sehlhorst, and A. Uster, Two-Scale Modelling of Micromorphic Continua, Continuum Mech. Thermodyn, vol.21, issue.4, pp.297-315, 2009.

S. Forest and R. Sievert, Nonlinear Microstrain Theories, Int. J. Solids Struct, vol.43, issue.24, pp.7224-7245, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00136739

F. Dell&apos;isola, U. Andreaus, P. , and L. , At the Origins and in the Vanguard of Peridynamics, Non-Local and Higher-Gradient Continuum Mechanics: An Underestimated and Still Topical Contribution of Gabrio Piola, Math. Mech. Solids, vol.20, issue.8, pp.887-928, 2014.

A. Carcaterra, F. Isola, R. Esposito, and M. Pulvirenti, Macroscopic Description of Microscopically Strongly Inhomogeneous Systems: A Mathematical Basis for the Synthesis of Higher Gradients Metamaterials, Arch. Ration. Mech. Anal, vol.218, issue.3, pp.1239-1262, 2015.

J. J. Alibert, C. , and A. D. , Second-Gradient Continua as Homogenized Limit of Pantographic Microstructured Plates: A Rigorous Proof, Z. Angew. Math. Phys, vol.66, issue.5, pp.2855-2870, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01279491

I. Giorgio, L. Galantucci, A. Della-corte, D. Vescovo, and D. , Piezo-Electromechanical Smart Materials With Distributed Arrays of Piezoelectric Transducers: Current and Upcoming Applications, Int. J. Appl. Electromagn. Mech, vol.47, issue.4, pp.1051-1084, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01121358

D. K. Trinh, R. Janicke, N. Auffray, S. Diebels, F. et al., Evaluation of Generalized Continuum Substitution Models for Heterogeneous Materials, Int. J. Multiscale Comput. Eng, vol.10, issue.6, pp.527-549, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00718875

M. F. Ashby, C. , and D. , Materials Selection in Mechanical Design, J. Phys, vol.IV, issue.C7, pp.7-8, 1993.
URL : https://hal.archives-ouvertes.fr/jpa-00251707

C. Elanchezhian and G. S. Sundar, Computer Aided Manufacturing, Firewall Media, 2007.

N. Auffray, F. Dellisola, V. Eremeyev, A. Madeo, R. et al., Analytical Continuum Mechanics a la Hamilton-Piola Least Action Principle for Second Gradient Continua and Capillary Fluids, Math. Mech. Solids, vol.20, issue.4, pp.375-417, 2015.
URL : https://hal.archives-ouvertes.fr/hal-00836085

G. W. Milton, W. , and J. R. , On Modifications of Newton's Second Law and Linear Continuum Elastodynamics, Proc. R. Soc. London A, vol.463, pp.855-880, 2007.

N. Metropolis, The Beginning of the Monte Carlo Method, Los Alamos Sci., Special Issue, pp.125-130, 1987.

H. H. Happ and G. Kron, Gabriel Kron and Systems Theory, 1973.

O. C. Zienkiewicz, R. L. Taylor, O. C. Zienkiewicz, T. , and R. L. , The Finite Element Method, vol.3, 1977.

L. Greco, N. Impollonia, C. , and M. , A Procedure for the Static Analysis of Cable Structures Following Elastic Catenary Theory, Int. J. Solids Struct, vol.51, issue.7, pp.1521-1533, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00954208

L. Greco, C. , and M. , On the Force Density Method for Slack Cable Nets, Int. J. Solids Struct, vol.49, issue.13, pp.1526-1540, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00874312

E. Garusi, A. Tralli, C. , and A. , An Unsymmetric Stress Formulation for Reissner-Mindlin Plates: A Simple and Locking-Free Rectangular Element, Int. J. Comput. Eng. Sci, vol.5, issue.3, pp.589-618, 2004.

E. Reccia, A. Cazzani, C. , and A. , FEM-DEM Modeling for Outof-Plane Loaded Masonry Panels: A Limit Analysis Approach, Open Civil Eng. J, vol.6, issue.1, pp.231-238, 2012.

L. Greco, C. , and M. , Consistent Tangent Operator for an Exact Kirchhoff Rod Model, Continuum Mech. Thermodyn, vol.27, pp.861-877, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01009187

L. Carassale, P. , and G. , Non-Linear Discrete Models for the Stochastic Analysis of Cables in Turbulent Wind, Int. J. Nonlinear Mech, vol.45, issue.3, pp.219-231, 2010.

A. Javili and P. Steinmann, A Finite Element Framework for Continua With Boundary Energies. Part I: The Two-Dimensional Case, Comput. Meth. Appl. Mech. Eng, vol.198, issue.27, pp.2198-2208, 2009.

A. Javili and P. Steinmann, A Finite Element Framework for Continua With Boundary Energies. Part II: The Three-Dimensional Case, Comput. Methods Appl. Mech. Eng, vol.199, issue.9, pp.755-765, 2010.

E. Turco, C. , and P. , Elasto-Plastic Analysis of Kirchhoff Plates by High Simplicity Finite Elements, Comput. Methods Appl. Mech. Eng, vol.190, pp.691-706, 2000.

D. Ciancio, I. Carol, C. , and M. , Crack Opening Conditions at 'Corner Nodes' in FE Analysis With Cracking Along Mesh Lines, Eng. Fracture Mech, vol.74, issue.13, pp.1963-1982, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00878038

D. Ciancio, I. Carol, C. , and M. , On Inter-Element Forces in the FEM-Displacement Formulation, and Implications for Stress Recovery, Int. J. Numer. Methods Eng, vol.66, issue.3, pp.502-528, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00878256

T. J. Hughes, J. A. Cottrell, and Y. Bazilevs, Isogeometric Analysis: CAD, Finite Elements, NURBS, Exact Geometry and Mesh Refinement, Comput. Methods Appl. Mech. Eng, vol.194, issue.39, pp.4135-4195, 2005.
URL : https://hal.archives-ouvertes.fr/hal-01513346

A. Cazzani, M. Malag-u, and E. Turco, Isogeometric Analysis of PlaneCurved Beams, Math. Mech. Solids, epub

L. Greco, C. , and M. , B-Spline Interpolation of Kirchhoff-Love Space Rods, Comput. Methods Appl. Mech. Eng, vol.256, pp.251-269, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00874611

L. Greco, C. , and M. , An Implicit G1 Multi Patch B-Spline Interpolation for Kirchhoff-Love Space Rod, Comput. Methods Appl. Mech. Eng, vol.269, pp.173-197, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00874299

A. Cazzani, M. Malag-u, and E. Turco, Isogeometric Analysis: A Powerful Numerical Tool for the Elastic Analysis of Historical Masonry Arches, Continuum Mech. Thermodyn, 2014.

A. Cazzani, M. Malag-u, E. Turco, and F. Stochino, Constitutive Models for Strongly Curved Beams in the Frame of Isogeometric Analysis, Math. Mech. Solids, epub

M. Cuomo, L. Contrafatto, and L. Greco, A Variational Model Based on Isogeometric Interpolation for the Analysis of Cracked Bodies, Int. J. Eng. Sci, vol.80, issue.SI, pp.173-188, 2014.

E. De-luycker, D. Benson, T. Belytschko, Y. Bazilevs, and M. Hsu, X-FEM in Isogeometric Analysis for Linear Fracture Mechanics, Int. J. Numer. Methods Eng, vol.87, issue.6, pp.541-565, 2011.
URL : https://hal.archives-ouvertes.fr/hal-01657905

M. P. Allen, Introduction to Molecular Dynamics Simulation, Comput. Soft Matter, vol.23, pp.1-28, 2004.

J. Tinsley-oden, S. Prudhomme, A. Romkes, and P. T. Bauman, Multiscale Modeling of Physical Phenomena: Adaptive Control of Models, SIAM J. Sci. Comput, vol.28, issue.6, pp.2359-2389, 2006.

G. Piola, The Complete Works of Gabrio Piola, Commented English Translation, vol.38, 2014.

, Applied Mechanics Reviews, vol.67, pp.60804-60821, 2015.

S. A. Silling, M. Epton, O. Weckner, J. Xu, A. et al., Peridynamic States and Constitutive Modeling, J. Elasticity, vol.88, issue.2, pp.151-184, 2007.
DOI : 10.1007/s10659-007-9125-1

URL : http://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=1094&context=usdoepub

S. Silling and R. Lehoucq, Peridynamic Theory of Solid Mechanics, Adv. Appl. Mech, vol.44, issue.1, pp.73-166, 2010.

E. Askari, F. Bobaru, R. Lehoucq, M. Parks, S. Silling et al., Peridynamics for Multiscale Materials Modeling, J. Phys.: Conf. Ser, vol.125, issue.1, p.12078, 2008.
DOI : 10.1088/1742-6596/125/1/012078

URL : http://iopscience.iop.org/article/10.1088/1742-6596/125/1/012078/pdf

S. A. Silling, A. , and E. , A Meshfree Method Based on the Peridynamic Model of Solid Mechanics, Comput. Struct, vol.83, issue.17, pp.1526-1535, 2005.

M. L. Parks, R. B. Lehoucq, S. J. Plimpton, and S. A. Silling, Implementing Peridynamics Within a Molecular Dynamics Code, Comput. Phys. Commun, vol.179, issue.11, pp.777-783, 2008.
DOI : 10.1016/j.cpc.2008.06.011

URL : https://zenodo.org/record/1258867/files/article.pdf

S. Leyendecker, S. Ober-bl?-obaum, J. E. Marsden, and M. Ortiz, Discrete Mechanics and Optimal Control for Constrained Systems, Optim. Control Appl. Methods, issue.6, pp.505-528, 2010.

M. Ferretti, A. Madeo, F. Isola, and P. Boisse, Modeling the Onset of Shear Boundary Layers in Fibrous Composite Reinforcements by Second-Gradient Theory, Z. Angew. Math. Phys, vol.65, issue.3, pp.587-612, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00934569

U. Andreaus, F. Isola, and M. Porfiri, Piezoelectric Passive Distributed Controllers for Beam Flexural Vibrations, J. Vib. Control, vol.10, issue.5, pp.625-659, 2004.
DOI : 10.1177/1077546304038224

URL : https://hal.archives-ouvertes.fr/hal-00498237

C. Maurini, J. Pouget, and F. Isola, Extension of the Euler-Bernoulli Model of Piezoelectric Laminates to Include 3D Effects Via a Mixed Approach, Comput. Struct, vol.84, issue.22, pp.1438-1458, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00499426

F. Dell&apos;isola, C. Maurini, and M. Porfiri, Passive Damping of Beam Vibrations Through Distributed Electric Networks and Piezoelectric Transducers: Prototype Design and Experimental Validation, Smart Mater. Struct, vol.13, issue.2, p.299, 2004.

G. Gantzounis, M. Serra-garcia, K. Homma, J. Mendoza, and C. Daraio, Granular Metamaterials for Vibration Mitigation, J. Appl. Phys, vol.114, issue.9, p.93514, 2013.
DOI : 10.1063/1.4820521

URL : https://authors.library.caltech.edu/42260/1/1.4820521.pdf

S. Alessandroni, U. Andreaus, F. Isola, and M. Porfiri, A Passive Electric Controller for Multimodal Vibrations of Thin Plates, Comput. Struct, vol.83, issue.15, pp.1236-1250, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00498461

T. Bailey and J. E. Ubbard, Distributed Piezoelectric-Polymer Active Vibration Control of a Cantilever Beam, J. Guid. Control Dyn, vol.8, issue.5, pp.605-611, 1985.

S. Behrens, A. J. Fleming, and S. O. Moheimani, A Broadband Controller for Shunt Piezoelectric Damping of Structural Vibration, Smart Mater. Struct, vol.12, issue.1, p.18, 2003.

L. R. Corr, C. , and W. W. , A Novel Semi-Active Multi-Modal Vibration Control Law for a Piezoceramic Actuator, ASME J. Vib. Acoust, vol.125, issue.2, pp.214-222, 2003.

E. K. Dimitriadis, C. R. Fuller, R. , and C. A. , Piezoelectric Actuators for Distributed Vibration Excitation of Thin Plates, ASME J. Vib. Acoust, vol.113, issue.1, pp.100-107, 1991.

J. J. Hollkamp, Multimodal Passive Vibration Suppression With Piezoelectric Materials and Resonant Shunts, J. Intell. Mater. Syst. Struct, vol.5, issue.1, pp.49-57, 1994.
DOI : 10.1177/1045389x9400500106

M. Lallart, E. Lefeuvre, C. Richard, G. , and D. , Self-Powered Circuit for Broadband, Multimodal Piezoelectric Vibration Control, Sens. Actuators A, vol.143, issue.2, pp.377-382, 2008.

A. Pipkin, Plane Traction Problems for Inextensible Networks, Q. J. Mech. Appl. Math, vol.34, issue.4, pp.415-429, 1981.

R. Rivlin, Plane Strain of a Net Formed by Inextensible Cords, Collected Papers of RS Rivlin, pp.511-534, 1997.

D. Agostino, M. V. Giorgio, I. Greco, L. Madeo, A. Boisse et al., Continuum and Discrete Models for Structures Including (Quasi-) Inextensible Elasticae With a View to the Design and Modeling of Composite Reinforcements, Int. J. Solids Struct, vol.59, pp.1-17, 2015.

F. Dell&apos;isola, M. V. Agostino, A. Madeo, P. Boisse, and D. Steigmann, Minimization of Shear Energy in Two Dimensional Continua With Two Orthogonal Families of Inextensible Fibers: The Case of Standard Bias Extension Test, J. Elasticity, epub

F. Dell&apos;isola, I. Giorgio, A. , and U. , Elastic Pantographic 2D Lattices: A Numerical Analysis on Static Response and Wave Propagation, Proc. Est. Acad. Sci, vol.64, issue.3, pp.219-225, 2015.

B. Descamps, Computational Design of Lightweight Structures: Form Finding and Optimization, 2014.

F. Dell&apos;isola, A. Della-corte, L. Greco, and A. Luongo, Plane Bias Extension Test for a Continuum With Two Inextensible Families of Fibers: A Variational Treatment With Lagrange Multipliers and a Perturbation Solution, Int. J. Solids Struct

F. Dell&apos;isola and D. Steigmann, A Two-Dimensional GradientElasticity Theory for Woven Fabrics, J. Elasticity, vol.118, issue.1, pp.113-125, 2015.

N. Hamila and P. Boisse, Tension Locking in Finite-Element Analyses of Textile Composite Reinforcement Deformation, C. R. M ec, vol.341, issue.6, pp.508-519, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00934496

N. Hamila and P. Boisse, Locking in Simulation of Composite Reinforcement Deformations. Analysis and Treatment, Composites, Part A, vol.53, pp.109-117, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00938611

S. Federico, On the Linear Elasticity of Porous Materials, Int. J. Mech. Sci, vol.52, issue.2, pp.175-182, 2010.

S. J. Hollister, Porous Scaffold Design for Tissue Engineering, Nat. Mater, vol.4, issue.7, pp.518-524, 2005.

F. Serra, K. C. Vishnubhatla, M. Buscaglia, R. Cerbino, R. Osellame et al., Topological Defects of Nematic Liquid Crystals Confined in Porous Networks, Soft Matter, vol.7, issue.22, pp.10945-10950, 2011.

T. Araki, M. Buscaglia, T. Bellini, and H. Tanaka, Memory and Topological Frustration in Nematic Liquid Crystals Confined in Porous Materials, Nat. Mater, vol.10, issue.4, pp.303-309, 2011.

U. Andreaus, C. , and M. , Prediction of Micromotion Initiation of an Implanted Femur Under Physiological Loads and Constraints Using the Finite Element Method, Proc. Inst. Mech. Eng, Part H, vol.223, pp.589-605, 2009.

U. Andreaus, M. Colloca, and D. Iacoviello, Modeling of Trabecular Architecture as Result of an Optimal Control Procedure, Lecture Notes in Computational Vision and Biomechanics), vol.4, 2013.

U. Andreaus, M. Colloca, D. Iacoviello, and M. Pignataro, OptimalTuning PID Control of Adaptive Materials for Structural Efficiency, Struct. Multidiscip. Optim, vol.43, issue.1, pp.43-59, 2011.

U. Andreaus, I. Giorgio, and T. Lekszycki, A 2-D Continuum Model of a Mixture of Bone Tissue and Bio-Resorbable Material for Simulating Mass Density Redistribution Under Load Slowly Variable in Time, Z. Angew. Math. Mech./J. Appl. Math. Mech, vol.94, issue.12, pp.978-1000, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00842604

J. Park, Q. Ye, E. M. Topp, C. H. Lee, E. L. Kostoryz et al., Dynamic Mechanical Analysis and Esterase Degradation of Dentin Adhesives Containing a Branched Methacrylate, J. Biomed. Mater. Res., Part B, vol.91, issue.1, pp.61-70, 2009.

U. Andreaus, I. Giorgio, and A. Madeo, Modeling of the Interaction Between Bone Tissue and Resorbable Biomaterial as Linear Elastic Materials With Voids, Z. Angew. Math. Phys, vol.66, issue.1, pp.209-237, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00944570

J. Ganghoffer, A Contribution to the Mechanics and Thermodynamics of Surface Growth. Application to Bone External Remodeling, Int. J. Eng. Sci, vol.50, issue.1, pp.166-191, 2012.

I. Giorgio, U. Andreaus, and A. Madeo, The Influence of Different Loads on the Remodeling Process of a Bone and Bio-Resorbable Material Mixture With Voids, Continuum Mech. Thermodyn, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01094868

C. Laurent, D. Durville, C. Vaquette, R. Rahouadj, and J. Ganghoffer, Computer-Aided Tissue Engineering: Application to the Case of Anterior Cruciate Ligament Repair, Biomech. Cells Tissues, vol.9, issue.1, pp.1-44, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00825072

C. Laurent, D. Durville, D. Mainard, J. Ganghoffer, R. et al., Designing a New Scaffold for Anterior Cruciate Ligament Tissue Engineering, J. Mech. Behav. Biomed. Mater, vol.12, issue.1, pp.184-196, 2012.

C. Laurent, D. Durville, X. Wang, J. Ganghoffer, R. et al., Designing a New Scaffold for Anterior Cruciate Ligament Tissue Engineering, Comput. Methods Biomech. Biomed. Eng, vol.13, issue.S1, pp.87-88, 2010.

A. Misra, P. Spencer, O. Marangos, Y. Wang, and J. L. Katz, Parametric Study of the Effect of Phase Anisotropy on the Micromechanical Behaviour of Dentin-Adhesive Interfaces, J. R. Soc. Interface, vol.2, issue.3, pp.145-157, 2005.

P. Spencer, Q. Ye, J. Park, E. M. Topp, A. Misra et al., Adhesive/Dentin Interface: The Weak Link in the Composite Restoration, Ann. Biomed. Eng, vol.38, issue.6, pp.1989-2003, 2010.

D. J. Steigmann and D. Isola, Mechanical Response of Fabric Sheets to Three-Dimensional Bending, Twisting, and Stretching, Acta Mech. Sin, vol.31, issue.3, pp.373-382
URL : https://hal.archives-ouvertes.fr/hal-01198464

Q. Ye, P. Spencer, Y. Wang, and A. Misra, Relationship of Solvent to the Photopolymerization Process, Properties, and Structure in Model Dentin Adhesives, J. Biomed. Mater. Res., Part A, vol.80, issue.2, pp.342-350, 2007.

L. Hu, M. Pasta, F. L. Mantia, L. Cui, S. Jeong et al., Stretchable, Porous, and Conductive Energy Textiles, vol.10, pp.708-714, 2010.

G. Piccardo, G. Ranzi, and A. Luongo, A Complete Dynamic Approach to the Generalized Beam Theory Cross-Section Analysis Including Extension and Shear Modes, Math. Mech. Solids, vol.19, issue.8, pp.900-924, 2014.

G. Piccardo and F. Tubino, Dynamic Response of Euler-Bernoulli Beams to Resonant Harmonic Moving Loads, Struct. Eng. Mech, vol.44, issue.5, pp.681-704, 2012.

A. Luongo, D. Zulli, P. , and G. , A Linear Curved-Beam Model for the Analysis of Galloping in Suspended Cables, J. Mech. Mater. Struct, vol.2, issue.4, pp.675-694, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00789166

H. Altenbach, M. B^-irsan, and V. A. Eremeyev, On a Thermodynamic Theory of Rods With Two Temperature Fields, Acta Mech, vol.223, issue.8, pp.1583-1596, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00821509

A. Luongo, P. , and G. , Non-Linear Galloping of Sagged Cables in 1:2 Internal Resonance, J. Sound Vib, vol.214, issue.5, pp.915-940, 1998.
URL : https://hal.archives-ouvertes.fr/hal-00812553

A. Luongo, D. Zulli, P. , and G. , Analytical and Numerical Approaches to Nonlinear Galloping of Internally Resonant Suspended Cables, J. Sound Vib, vol.315, issue.3, pp.375-393, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00788555

A. Luongo, G. Rega, and F. Vestroni, Planar Non-Linear Free Vibrations of an Elastic Cable, Int. J. Nonlinear Mech, vol.19, issue.1, pp.39-52, 1984.
URL : https://hal.archives-ouvertes.fr/hal-00787648

A. Luongo, Perturbation Methods for Nonlinear Autonomous Discrete-Time Dynamical Systems, Nonlinear Dyn, vol.10, issue.4, pp.317-331, 1996.

W. K. Liu, H. S. Park, D. Qian, E. G. Karpov, H. Kadowaki et al., Bridging Scale Methods for Nanomechanics and Materials, Comput. Methods Appl. Mech. Eng, vol.195, issue.13, pp.1407-1421, 2006.

C. Miehe, J. Schr?-oder, and J. Schotte, Computational Homogenization Analysis in Finite Plasticity Simulation of Texture Development in Polycrystalline Materials, Comput. Methods Appl. Mech. Eng, vol.171, issue.3, pp.387-418, 1999.

M. Brun, O. Lopez-pamies, and P. P. Castaneda, Homogenization Estimates for Fiber-Reinforced Elastomers With Periodic Microstructures, Int. J. Solids Struct, vol.44, issue.18, pp.5953-5979, 2007.

G. Milton, Modelling the Properties of Composites by Laminates, Homogenization and Effective Moduli of Materials and Media, pp.150-174, 1986.

D. Reis, F. Ganghoffer, and J. , Equivalent Mechanical Properties of Auxetic Lattices From Discrete Homogenization, Comput. Mater. Sci, vol.51, issue.1, pp.314-321, 2012.

D. Reis, F. Ganghoffer, and J. , Construction of Micropolar Continua From the Homogenization of Repetitive Planar Lattices, Mechanics of Generalized Continua, pp.193-217, 2011.

P. Ladeveze and A. Nouy, On a Multiscale Computational Strategy With Time and Space Homogenization for Structural Mechanics, Comput. Methods Appl. Mech. Eng, vol.192, issue.28, pp.3061-3087, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00366648

S. Federico, A. Grillo, and W. Herzog, A Transversely Isotropic Composite With a Statistical Distribution of Spheroidal Inclusions: A Geometrical Approach to Overall Properties, J. Mech. Phys. Solids, vol.52, issue.10, pp.2309-2327, 2004.

I. Goda, M. Assidi, S. Belouettar, and J. Ganghoffer, A Micropolar Anisotropic Constitutive Model of Cancellous Bone From Discrete Homogenization, J. Mech. Behav. Biomed. Mater, vol.16, pp.87-108, 2012.

T. Ebinger, H. Steeb, and S. Diebels, Modeling Macroscopic Extended Continua With the Aid of Numerical Homogenization Schemes, Comput. Mater. Sci, vol.32, issue.3, pp.337-347, 2005.

S. Ober-bl?-obaum, O. Junge, and J. E. Marsden, Discrete Mechanics and Optimal Control: An Analysis, ESAIM: Control Optim. Calculus Var, vol.17, issue.2, pp.322-352, 2011.

A. Luongo, G. Rega, and F. Vestroni, On Nonlinear Dynamics of Planar Shear Indeformable Beams, ASME J. Appl. Mech, vol.53, issue.3, pp.619-624, 1986.
URL : https://hal.archives-ouvertes.fr/hal-00789126

M. B^-irsan, H. Altenbach, T. Sadowski, V. Eremeyev, P. et al., Deformation Analysis of Functionally Graded Beams by the Direct Approach, Composites, Part B, vol.43, issue.3, pp.1315-1328, 2012.

C. C. Mei and B. Vernescu, Homogenization Methods for Multiscale Mechanics, 2010.

A. Madeo, P. Neff, I. Ghiba, L. Placidi, R. et al., Wave Propagation in Relaxed Micromorphic Continua: Modeling Metamaterials With Frequency Band-Gaps, Continuum Mech. Thermodyn, vol.27, issue.4, pp.551-570, 2013.

A. Berezovski, I. Giorgio, D. Corte, and A. , Interfaces in Micromorphic Materials: Wave Transmission and Reflection With Numerical Simulations, Math. Mech. Solids, epub, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01194376

A. Madeo, A. Della-corte, L. Greco, and P. Neff, Wave Propagation in Pantographic 2D Lattices With Internal Discontinuities, Proc. Est. Acad. Sci

P. Seppecher, J. Alibert, and F. Isola, Linear Elastic Trusses Leading to Continua With Exotic Mechanical Interactions, J. Phys.: Conf. Ser, vol.319, issue.1, p.12018, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00630098

I. Giorgio, A. Culla, D. Vescovo, and D. , Multimode Vibration Control Using Several Piezoelectric Transducers Shunted With a Multiterminal Network, Arch. Appl. Mech, vol.79, issue.9, pp.859-879, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00798627

S. O. Moheimani, A Survey of Recent Innovations in Vibration Damping and Control Using Shunted Piezoelectric Transducers, IEEE Trans. Control Syst. Technol, vol.11, issue.4, pp.482-494, 2003.

M. Porfiri, F. Isola, and F. Mascioli, Circuit Analog of a Beam and Its Application to Multimodal Vibration Damping, Using Piezoelectric Transducers, Int. J. Circuit Theory Appl, vol.32, issue.4, pp.167-198, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00499413

V. Eremeev, A. Freidin, and L. Sharipova, Nonuniqueness and Stability in Problems of Equilibrium of Elastic Two-Phase Bodies, Dokl. Phys, vol.48, issue.7, pp.359-363, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00826484

V. Yeremeyev, A. Freidin, and L. Sharipova, The Stability of the Equilibrium of Two-Phase Elastic Solids, J. Appl. Math. Mech, vol.71, issue.1, pp.61-84, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00831678

N. Rizzi, V. Varano, G. , and S. , Initial Postbuckling Behavior of Thin-Walled Frames Under Mode Interaction, vol.68, pp.124-134, 2013.
DOI : 10.1016/j.tws.2013.03.004

N. Rizzi and V. Varano, On the Postbuckling Analysis of ThinWalled Frames, 13th International Conference On Civil, Structural And Environmental Engineering Computing (CC2011), 2009.

N. Rizzi and V. Varano, The Effects of Warping on the Postbuckling Behaviour of Thin-Walled Structures, Thin-Walled Struct, vol.49, issue.9, pp.1091-1097, 2011.

M. Pignataro, G. Ruta, N. Rizzi, and V. Varano, Effects of Warping Constraints and Lateral Restraint on the Buckling of Thin-Walled Frames, 2010.

M. Pignataro, N. Rizzi, G. Ruta, and V. Varano, The Effects of Warping Constraints on the Buckling of Thin-Walled Structures, J. Mech. Mater. Struct, vol.4, issue.10, pp.1711-1727, 2009.

G. Ruta, V. Varano, M. Pignataro, R. , and N. , A Beam Model for the Flexural-Torsional Buckling of Thin-Walled Members With Some Applications, Thin-Walled Struct, vol.46, pp.816-822, 2008.

M. Pignataro, N. Rizzi, and A. Luongo, Stability, Bifurcation, and Postcritical Behaviour of Elastic Structures, 1991.

A. Luongo, Mode Localization in Dynamics and Buckling of Linear Imperfect Continuous Structures, Nonlinear Dyn, vol.25, pp.133-156, 2001.
URL : https://hal.archives-ouvertes.fr/hal-00798925

A. Luongo, P. , and G. , Linear Instability Mechanisms for Coupled Translational Galloping, J. Sound Vib, vol.288, issue.4, pp.1027-1047, 2005.
DOI : 10.1016/j.jsv.2005.01.056

URL : https://hal.archives-ouvertes.fr/hal-00790779

A. Luongo and D. Zulli, Dynamic Instability of Inclined Cables Under Combined Wind Flow and Support Motion, Nonlinear Dyn, vol.67, issue.1, pp.71-87, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00788394

A. Luongo and D. Zulli, Aeroelastic Instability Analysis of NESControlled Systems Via a Mixed Multiple Scale/Harmonic Balance Method, J. Vib. Control, vol.20, issue.13, pp.1985-1998, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00909812

A. Luongo, A Unified Perturbation Approach to Static/Dynamic Coupled Instabilities of Nonlinear Structures, Thin-Walled Struct, vol.48, issue.10, pp.744-751, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00788398

D. Egidio, A. Luongo, A. , P. , and A. , Linear and Non-Linear Interactions Between Static and Dynamic Bifurcations of Damped Planar Beams, Int. J. Nonlinear Mech, vol.42, issue.1, pp.88-98, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00790054

F. Vestroni, A. Luongo, and M. Pasca, Stability and Control of Transversal Oscillations of a Tethered Satellite System, Appl. Math. Comput, vol.70, issue.2, pp.343-360, 1995.
URL : https://hal.archives-ouvertes.fr/hal-00801990

J. Knight, T. Page, C. , and H. , Thermal Instability of the Microstructure and Surface Mechanical Properties of Hydrogenated Amorphous Carbon Films, Surf. Coat. Technol, vol.49, issue.1, pp.519-529, 1991.

E. Ma, Nanocrystalline Materials: Controlling Plastic Instability, Nat. Mater, vol.2, issue.1, pp.7-8, 2003.
DOI : 10.1038/nmat797

T. Konkova, S. Mironov, A. Korznikov, and S. Semiatin, Microstructure Instability in Cryogenically Deformed Copper, Scr. Mater, vol.63, issue.9, pp.921-924, 2010.
DOI : 10.1016/j.scriptamat.2010.07.005

H. Zhu, K. Maruyama, D. Seo, and P. Au, Effect of Initial Microstructure on Microstructural Instability and Creep Resistance of XD TiAl Alloys, Metall. Mater. Trans. A, vol.37, issue.10, pp.3149-3159, 2006.

H. Lipson and M. Kurman, Fabricated: The New World of 3D Printing, 2013.

L. Hockaday, K. Kang, N. Colangelo, P. Cheung, B. Duan et al., Rapid 3D Printing of Anatomically Accurate and Mechanically Heterogeneous Aortic Valve Hydrogel Scaffolds, Biofabrication, vol.4, issue.3, p.35005, 2012.
DOI : 10.1088/1758-5082/4/3/035005

URL : http://europepmc.org/articles/pmc3676672?pdf=render

A. Greiner and J. H. Wendorff, Electrospinning: A Fascinating Method for the Preparation of Ultrathin Fibers, Angew. Chem. Int. Ed, vol.46, issue.30, pp.5670-5703, 2007.

T. J. Sill and H. A. Recum, Electrospinning: Applications in Drug Delivery and Tissue Engineering, Biomaterials, vol.29, issue.13, pp.1989-2006, 2008.
DOI : 10.1016/j.biomaterials.2008.01.011

N. Bhardwaj and S. C. Kundu, Electrospinning: A Fascinating Fiber Fabrication Technique, Biotechnol. Adv, vol.28, issue.3, pp.325-347, 2010.
DOI : 10.1016/j.biotechadv.2010.01.004

D. Camillo, D. Fasano, V. Ruggieri, F. Santucci, S. Lozzi et al., Near-Field Electrospinning of Conjugated Polymer Light-Emitting Nanofibers, Nanosc, vol.5, pp.11637-11642, 2013.

D. Camillo, D. Ruggieri, F. Santucci, S. Lozzi, and L. , N-Doped TiO 2 Nanofibers Deposited by Electrospinning, J. Phys. Chem. C, vol.116, issue.34, pp.18427-18431, 2012.

R. Dell&apos;erba, F. Isola, R. , and G. , The Influence of the Curvature Dependence of the Surface Tension on the Geometry of Electrically Charged Menisci, Continuum Mech. Thermodyn, vol.11, issue.2, pp.89-105, 1999.

S. Agarwal, J. H. Wendorff, and A. Greiner, Progress in the Field of Electrospinning for Tissue Engineering Applications, Adv. Mater, vol.21, pp.3343-3351, 2009.

V. Beachley, V. Kasyanov, A. Nagy-mehesz, R. Norris, I. Ozolanta et al., The Fusion of Tissue Spheroids Attached to Pre-Stretched Electrospun Polyurethane Scaffolds, vol.5, p.2041731414556561, 2014.

H. Yasuda, Y. , and J. , Reentrant Origami-Based Metamaterials With Negative Poisson's Ratio and Bistability, Phys. Rev. Lett, vol.114, issue.18, p.185502, 2015.
DOI : 10.1103/physrevlett.114.185502

URL : https://link.aps.org/accepted/10.1103/PhysRevLett.114.185502

C. Boutin and F. X. Becot, Theory and Experiments on PoroAcoustics With Inner Resonators, Wave Motion, vol.54, pp.76-99, 2015.
DOI : 10.1016/j.wavemoti.2014.11.013

L. D. Boutin and . Schwan, Depolarization of Mechanical Waves by Anisotropic Metasurface, J. Appl. Phys, vol.117, issue.6, p.64902

C. Boutin, A. , and J. , Rayleigh Scattering in Elastic Composite Materials, Int. J. Eng. Sci, vol.31, issue.12, pp.1669-1689, 1993.
DOI : 10.1016/0020-7225(93)90082-6

URL : https://hal.archives-ouvertes.fr/hal-00940461

C. Boutin, A. Rallu, H. , and S. , Large Scale Modulation of High Frequency Acoustic Waves in Periodic Porous Media, J. Acoust. Soc. Am, vol.132, issue.6, pp.3622-3636, 2012.

C. Boutin, P. Royer, A. , and J. , Acoustic Absorption of Porous Surfacing With Dual Porosity, Int. J. Solids Struct, vol.35, issue.34, pp.4709-4737, 1998.
URL : https://hal.archives-ouvertes.fr/hal-01714038

C. Chesnais, S. Hans, and C. Boutin, Wave Propagation and Diffraction in Discrete Structures: Effect of Anisotropy and Internal Resonance, PAMM, vol.7, issue.1, p.1090, 2007.

V. Fokin, M. Ambati, C. Sun, and X. Zhang, Method for Retrieving Effective Properties of Locally Resonant Acoustic Metamaterials, Phys. Rev. B, vol.76, issue.14, p.144302, 2007.

P. Wang, F. Casadei, S. Shan, J. C. Weaver, and K. Bertoldi, Harnessing Buckling to Design Tunable Locally Resonant Acoustic Metamaterials, Phys. Rev. Lett, vol.113, issue.1, p.14301, 2014.
DOI : 10.1103/physrevlett.113.014301

H. Altenbach, V. A. Eremeyev, and N. F. Morozov, Mechanical Properties of Materials Considering Surface Effects, IUTAM Symposium on Surface Effects in the Mechanics of Nanomaterials and Heterostructures, Beijing, pp.105-115, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00824006

V. Nesterenko, C. Daraio, E. Herbold, J. , and S. , Anomalous Wave Reflection at the Interface of Two Strongly Nonlinear Granular Media, Phys. Rev. Lett, vol.95, issue.15, p.158702, 2005.

, Applied Mechanics Reviews, vol.67, pp.60804-60823, 2015.

V. A. Eremeyev, On Effective Properties of Materials at the Nanoand Microscales Considering Surface Effects, Acta Mech., epub, 2015.

S. Cuenot, C. Fr-etigny, S. Demoustier-champagne, and B. Nysten, Surface Tension Effect on the Mechanical Properties of Nanomaterials Measured by Atomic Force Microscopy, Phys. Rev. B, vol.69, issue.16, p.165410, 2004.

C. Chen, Y. Shi, Y. Zhang, J. Zhu, Y. et al., Size Dependence of Young's Modulus in ZnO Nanowires, Phys. Rev. Lett, vol.96, issue.7, p.75505, 2006.

X. Liu, J. Luo, and J. Zhu, Size Effect on the Crystal Structure of Silver Nanowires, Nano Lett, vol.6, issue.3, pp.408-412, 2006.

G. Y. Jing, H. L. Duan, X. M. Sun, Z. S. Zhang, J. Xu et al., Surface Effects on Elastic Properties of Silver Nanowires: Contact Atomic-Force Microscopy, Phys. Rev. B, vol.73, issue.23, p.235409, 2006.

J. He and C. M. Lilley, Surface Effect on the Elastic Behavior of Static Bending Nanowires, Nano Lett, vol.8, issue.7, pp.1798-1802, 2008.

J. R. Greer and J. T. De-hosson, Plasticity in Small-Sized Metallic Systems: Intrinsic Versus Extrinsic Size Effect, Prog. Mater. Sci, vol.56, issue.6, pp.654-724, 2011.
DOI : 10.1016/j.pmatsci.2011.01.005

J. R. Greer and W. D. Nix, Size Dependence of Mechanical Properties of Gold at the Sub-Micron Scale, Appl. Phys. A, vol.80, issue.8, pp.1625-1629, 2005.

?. U. Ozg?-ur, Y. I. Alivov, C. Liu, A. Teke, M. Reshchikov et al., A Comprehensive Review of ZnO Materials and Devices, J. Appl. Phys, vol.98, issue.4, p.41301, 2005.

B. Bhushan, Handbook Springer of Nanotechnology, 2007.

A. V. Melechko, V. I. Merkulov, T. E. Mcknight, M. Guillorn, K. L. Klein et al., Vertically Aligned Carbon Nanofibers and Related Structures: Controlled Synthesis and Directed Assembly, J. Appl. Phys, vol.97, issue.4, p.41301, 2005.
DOI : 10.1063/1.1857591

S. Grimm, R. Giesa, K. Sklarek, A. Langner, U. Gosele et al., Nondestructive Replication of Self-Ordered Nanoporous Alumina Membranes Via Cross-Linked Polyacrylate Nanofiber Arrays, Nano Lett, vol.8, issue.7, pp.1954-1959, 2008.

X. Ma, A. Liu, H. Xu, G. Li, M. Hu et al., A Large-ScaleOriented ZnO Rod Array Grown on a Glass Substrate Via an In Situ Deposition Method and Its Photoconductivity, Mater. Res. Bull, vol.43, issue.8, pp.2272-2277, 2008.

L. K. Tan, M. K. Kumar, W. W. An, and H. Gao, Transparent, Well-Aligned TiO 2 Nanotube Arrays With Controllable Dimensions on Glass Substrates for Photocatalytic Applications, ACS Appl. Mater. Interfaces, vol.2, issue.2, pp.498-503, 2010.
DOI : 10.1021/am900726k

S. B. Hutchens, A. Needleman, G. , and J. R. , Analysis of Uniaxial Compression of Vertically Aligned Carbon Nanotubes, J. Mech. Phys. Solids, issue.10, pp.2227-2237, 2011.

P. Spinelli, M. Verschuuren, P. , and A. , Broadband Omnidirectional Antireflection Coating Based on Subwavelength Surface Mie Resonators, Nat. Commun, vol.3, p.692, 2012.
DOI : 10.1038/ncomms1691

URL : http://europepmc.org/articles/pmc3338005?pdf=render

K. Naumenko and V. A. Eremeyev, A Layer-Wise Theory for Laminated Glass and Photovoltaic Panels, Compos. Struct, vol.112, pp.283-291, 2014.
DOI : 10.1016/j.compstruct.2014.02.009

X. Kang, W. Zi, Z. Xu, and H. Zhang, Controlling the Micro/Nanostructure of Self-Cleaning Polymer Coating, Appl. Surf. Sci, vol.253, issue.22, pp.8830-8834, 2007.
DOI : 10.1016/j.apsusc.2007.04.021

P. Rios, H. Dodiuk, S. Kenig, S. Mccarthy, and A. Dotan, Transparent Ultra-Hydrophobic Surfaces, J. Adhes. Sci. Technol, vol.21, pp.399-408, 2007.

S. L. Sanjay, B. G. Annaso, S. M. Chavan, and S. V. Rajiv, Recent Progress in Preparation of Superhydrophobic Surfaces: A Review, J. Surf. Eng. Mater. Adv. Technol, vol.2, issue.2, pp.76-94, 2012.

R. Dastjerdi and M. Montazer, A Review on the Application of Inorganic Nano-Structured Materials in the Modification of Textiles: Focus on Anti-Microbial Properties, Colloids Surf. B, vol.79, issue.1, pp.5-18, 2010.

C. B. Contreras, G. Chagas, M. C. Strumia, and D. E. Weibel, Permanent Superhydrophobic Polypropylene Nanocomposite Coatings by a Simple One-Step Dipping Process, Appl. Surf. Sci, vol.307, pp.234-240, 2014.

X. Tian, L. Yi, X. Meng, K. Xu, T. Jiang et al., Superhydrophobic Surfaces of Electrospun Block Copolymer Fibers With Low Content of Fluorosilicones, Appl. Surf. Sci, vol.307, pp.566-575, 2014.

S. Heinonen, E. Huttunen-saarivirta, J. Nikkanen, M. Raulio, O. Priha et al., Antibacterial Properties and Chemical Stability of Superhydrophobic Silver-Containing Surface Produced by Sol-Gel Route, Colloids Surf. A, vol.453, pp.149-161, 2014.

A. M. Escobar and N. Llorca-isern, Superhydrophobic Coating Deposited Directly on Aluminum, Appl. Surf. Sci, vol.305, pp.774-782, 2014.

J. Li, W. Zheng, W. Zeng, D. Zhang, and X. Peng, Structure, Properties and Application of a Novel Low-Glossed Waterborne Polyurethane, Appl. Surf. Sci, vol.307, pp.255-262, 2014.

V. A. Ganesh, H. K. Raut, A. S. Nair, and S. Ramakrishna, A Review on Self-Cleaning Coatings, J. Mater. Chem, vol.21, issue.41, pp.16304-16322, 2011.

K. Liu, J. , and L. , Bio-Inspired Self-Cleaning Surfaces, Annu. Rev. Mater. Res, vol.42, pp.231-263, 2012.

W. R. Longley and R. G. Name, The Collected Works of, 1928.

J. S. Rowlinson and B. Widom, Molecular Theory of Capillarity, 2003.

P. G. De-gennes, F. Brochard-wyart, and D. Qu-er-e, Capillarity and Wetting Phenomena: Drops, Bubbles, Pearls, Waves, 2004.

M. E. Gurtin, M. , and A. I. , A Continuum Theory of Elastic Material Surfaces, Arch. Ration. Mech. Anal, vol.57, issue.4, pp.291-323, 1975.

M. E. Gurtin, M. , and A. I. , Addenda to Our Paper. A Continuum Theory of Elastic Material Surfaces, Arch. Ration. Mech. Anal, vol.59, issue.4, pp.389-390, 1975.

H. L. Duan, J. Wang, and B. L. Karihaloo, Theory of Elasticity at the Nanoscale, Adv. Appl. Mech, vol.42, pp.1-68, 2008.

J. Wang, Z. Huang, H. Duan, S. Yu, X. Feng et al., Surface Stress Effect in Mechanics of Nanostructured Materials, Acta Mech. Solida Sin, vol.24, issue.1, pp.52-82, 2011.

A. Javili, A. Mcbride, and P. Steinmann, Thermomechanics of Solids With Lower-Dimensional Energetics: On the Importance of Surface, Interface, and Curve Structures at the Nanoscale. A Unifying Review, ASME Appl. Mech. Rev, vol.65, p.10802, 2012.

J. Wang, H. L. Duan, Z. P. Huang, and B. L. Karihaloo, A Scaling Law for Properties of Nano-Structured Materials, Proc. R. Soc. A, vol.462, pp.1355-1363, 2006.

D. J. Steigmann and R. W. Ogden, Elastic Surface-Substrate Interactions, Proc. R. Soc. A, vol.455, pp.437-474, 1982.

A. Javili and P. Steinmann, On Thermomechanical Solids With Boundary Structures, Int. J. Solids Struct, vol.47, issue.24, pp.3245-3253, 2010.

Y. Povstenko, Mathematical Modeling of Phenomena Caused by Surface Stresses in Solids, Surface Effects in Solid Mechanics, pp.135-153, 2013.

M. Rubin and Y. Benveniste, A Cosserat Shell Model for Interphases in Elastic Media, J. Mech. Phys. Solids, vol.52, issue.5, pp.1023-1052, 2004.

C. I. Kim, P. Schiavone, and C. Ru, Effect of Surface Elasticity on an Interface Crack in Plane Deformations, Proc. R. Soc. A, vol.467, pp.3530-3549, 2011.

C. Kim, C. Ru, and P. Schiavone, A Clarification of the Role of Crack-Tip Conditions in Linear Elasticity With Surface Effects, Math. Mech. Solids, vol.18, issue.1, pp.59-66, 2013.

P. Schiavone and C. Ru, Solvability of Boundary Value Problems in a Theory of Plane-Strain Elasticity With Boundary Reinforcement, Int. J. Eng. Sci, vol.47, issue.11, pp.1331-1338, 2009.

A. Javili, A. Mcbride, P. Steinmann, and B. Reddy, Relationships Between the Admissible Range of Surface Material Parameters and Stability of Linearly Elastic Bodies, Philos. Mag, vol.92, pp.3540-3563, 2012.

J. G. Guo and Y. P. Zhao, The Size-Dependent Elastic Properties of Nanofilms With Surface Effects, J. Appl. Phys, vol.98, issue.7, p.74306, 2005.

Z. Q. Wang, Y. Zhao, and Z. Huang, The Effects of Surface Tension on the Elastic Properties of Nano Structures, Int. J. Eng. Sci, vol.48, issue.2, pp.140-150, 2010.

V. A. Eremeyev, H. Altenbach, and N. F. Morozov, The Influence of Surface Tension on the Effective Stiffness of Nanosize Plates, Dokl. Phys, vol.54, issue.2, pp.98-100, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00826539

H. Altenbach, V. A. Eremeyev, and N. F. Morozov, Surface Viscoelasticity and Effective Properties of Thin-Walled Structures at the Nanoscale, Int. J. Eng. Sci, vol.59, issue.SI, pp.83-89, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00824872

H. Altenbach and V. A. Eremeyev, On the Shell Theory on the Nanoscale With Surface Stresses, Int. J. Eng. Sci, vol.49, issue.12, pp.1294-1301, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00824104

J. Lagowski, H. C. Gatos, and E. S. Sproles, Surface Stress and Normal Mode of Vibration of Thin Crystals: GaAs, Appl. Phys. Lett, vol.26, issue.9, pp.493-495, 1975.

M. E. Gurtin, X. Markenscoff, T. , and R. N. , Effect of Surface Stress on Natural Frequency of Thin Crystals, Appl. Phys. Lett, vol.29, issue.9, pp.529-530, 1976.

G. Wang and X. Feng, Effects of Surface Elasticity and Residual Surface Tension on the Natural Frequency of Microbeams, Appl. Phys. Lett, vol.90, issue.23, p.231904, 2007.

E. Kampshoff, E. Hahn, and K. Kern, Correlation Between Surface Stress and the Vibrational Shift of CO Chemisorbed on Cu Surfaces, Phys. Rev. Lett, vol.73, issue.5, pp.704-707, 1994.

G. F. Wang and X. Q. Feng, Effect of Surface Stresses on the Vibration and Buckling of Piezoelectric Nanowires, EPL, vol.91, issue.5, p.56007, 2010.

Z. Huang, W. , and J. , A Theory of Hyperelasticity of Multi-Phase Media With Surface/Interface Energy Effect, Acta Mech, vol.182, issue.3, pp.195-210, 2006.

Z. Huang and L. Sun, Size-Dependent Effective Properties of a Heterogeneous Material With Interface Energy Effect: From Finite Deformation Theory to Infinitesimal Strain Analysis, Acta Mech, vol.190, issue.1, pp.151-163, 2007.

H. X. Zhu, J. X. Wang, and B. L. Karihaloo, Effects of Surface and Initial Stresses on the Bending Stiffness of Trilayer Plates and Nanofilms, J. Mech. Mater. Struct, vol.4, issue.3, pp.589-604, 2009.

Z. Huang, W. , and J. , Micromechanics of Nanocomposites With Interface Energy Effect, pp.303-348, 2012.

A. Javili and P. Steinmann, A Finite Element Framework for Continua With Boundary Energies. Part I: The Two-Dimensional Case, Comput. Methods Appl. Mech. Eng, vol.198, pp.2198-2208, 2009.

A. Javili and P. Steinmann, A Finite Element Framework for Continua With Boundary Energies. Part III: The Thermomechanical Case, Comput. Methods Appl. Mech. Eng, vol.200, issue.21, pp.1963-1977, 2011.

A. Javili, A. Mcbride, and P. Steinmann, Numerical Modelling of Thermomechanical Solids With Mechanically Energetic (Generalised) Kapitza Interfaces, Comput. Mater. Sci, vol.65, pp.542-551, 2012.

M. Arroyo and T. Belytschko, An Atomistic-Based Finite Deformation Membrane for Single Layer Crystalline Films, J. Mech. Phys. Solids, vol.50, issue.9, pp.1941-1977, 2002.

D. Sfyris, G. Sfyris, and C. Galiotis, Curvature Dependent Surface Energy for a Free Standing Monolayer Graphene: Some Closed Form Solutions of the Non-Linear Theory, Int. J. Nonlinear Mech, vol.67, pp.186-197, 2014.

R. E. Miller and V. B. Shenoy, Size-Dependent Elastic Properties of Nanosized Structural Elements, Nanotechnology, vol.11, issue.3, p.139, 2000.

V. B. Shenoy, Atomistic Calculations of Elastic Properties of Metallic FCC Crystal Surfaces, Phys. Rev. B, vol.71, issue.9, p.94104, 2005.

H. Ibach, The Role of Surface Stress in Reconstruction, Epitaxial Growth and Stabilization of Mesoscopic Structures, Surf. Sci. Rep, vol.29, issue.5, pp.195-263, 1997.

P. G. De-gennes, Some Effects of Long Range Forces on Interfacial Phenomena, J. Phys. Lett, vol.42, issue.16, pp.377-379, 1981.
URL : https://hal.archives-ouvertes.fr/jpa-00231951

P. Seppecher, Les Fluides de Cahn-Hilliard, M emoire D'habilitation a Diriger des Recherches, 1996.

F. Dell&apos;isola and P. Seppecher, Edge Contact Forces and QuasiBalanced Power, Meccanica, vol.32, issue.1, pp.33-52, 1997.

F. Dell&apos;isola and P. Seppecher, The Relationship Between Edge Contact Forces, Double Forces and Interstitial Working Allowed by the Principle of Virtual Power, C. R. Acad. Sci. S er, vol.II, issue.8, pp.303-308, 1995.

F. Dellisola, T. Lekszycki, M. Pawlikowski, R. Grygoruk, and L. Greco, Designing a Light Fabric Metamaterial Being Highly Macroscopically Tough Under Directional Extension: First Experimental Evidence, Z. Angew. Math. Phys, vol.66, issue.6, pp.3473-3498, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01180475

I. Giorgio, R. Grygoruk, F. Isola, and D. J. Steigmann, Pattern Formation in the Three-Dimensional Deformations of Fibered Sheets, Mech. Res. Commun, vol.69, pp.164-171, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01194318

G. L. Isola and F. , Second Gradient Shear Energies for Pantographic 2D Plates: Numerical Simulations Towards Explanation of Experimental Evidence

J. M. Ball, Convexity Conditions and Existence Theorems in Nonlinear Elasticity, Arch. Ration. Mech. Anal, vol.63, issue.4, pp.337-403, 1976.

D. Kim, N. Lu, R. Ma, Y. Kim, R. Kim et al., , pp.838-843, 2011.

V. Arumugam, M. Naresh, and R. Sanjeevi, Effect of Strain Rate on the Fracture Behaviour of Skin, J. Biosci, vol.19, issue.3, pp.307-313, 1994.

P. Elsner, E. Berardesca, W. , and K. , Bioengineering of the Skin: Skin Biomechanics, vol.5, 2001.

M. Geerligs, L. Van-breemen, G. Peters, P. Ackermans, F. Baaijens et al., in vitro Indentation to Determine the Mechanical Properties of Epidermis, J. Biomech, vol.44, issue.6, pp.1176-1181, 2011.

A. Goriely, M. Destrade, and M. B. Amar, Instabilities in Elastomers and in Soft Tissues, Q. J. Mech. Appl. Math, vol.59, issue.4, pp.615-630, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00192242

S. P. Lacour, J. Jones, S. Wagner, T. Li, and Z. Suo, Stretchable Interconnects for Elastic Electronic Surfaces, Proc. IEEE, vol.93, issue.8, pp.1459-1467, 2005.

C. Pailler-mattei, S. Bec, and H. Zahouani, in vivo Measurements of the Elastic Mechanical Properties of Human Skin by Indentation Tests, Med. Eng. Phys, vol.30, issue.5, pp.599-606, 2008.

T. Sekitani, Y. Noguchi, K. Hata, T. Fukushima, T. Aida et al., A Rubberlike Stretchable Active Matrix Using Elastic Conductors, Science, vol.321, issue.5895, pp.1468-1472, 2008.

T. Rey, J. Le-cam, G. Chagnon, D. Favier, M. Rebouah et al., An Original Architectured NiTi Silicone Rubber Structure for Biomedical Applications, Mater. Sci. Eng. C, vol.45, pp.184-190, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01083236

G. Galilei, Opere: Edizione Nazionale sotto gli Auspicii di Sua Maest a il re d'Italia, vol.6, 1894.

S. Drake, Discoveries and Opinions of Galileo, 1957.

M. Cannone and S. Friedlander, Navier: Blow-Up and Collapse, Not. AMS, vol.50, issue.1, pp.7-13, 2003.

A. Picon, Navier and the Introduction of Suspension Bridges in France, Construction History, vol.4, pp.21-34, 1988.
URL : https://hal.archives-ouvertes.fr/hal-00756500

, Applied Mechanics Reviews, vol.67, pp.60804-60825, 2015.

P. Germain, La méthode des puissances virtuelles en mécanique des milieux continus. Premiére partie. Théorie du second gradient, J. Méc, vol.12, pp.235-274, 1973.

P. Germain, The method of virtual power in continuum mechanics. Part 2: microstructure, SIAM J. Appl. Math, vol.25, pp.556-575, 1973.

R. D. Mindlin, Second gradient of strain and surface tension in linear elasticity, Int. J. Solids Struct, vol.1, issue.4, pp.417-438, 1965.

R. A. Toupin, Elastic materials with couple-stresses, Arch. Ration. Mech. Anal, vol.11, issue.1, pp.385-414, 1962.
URL : https://hal.archives-ouvertes.fr/hal-00852443

R. A. Toupin, Theories of elasticity with couple-stress, Arch. Ration. Mech. Anal, vol.17, issue.2, pp.85-112, 1964.
URL : https://hal.archives-ouvertes.fr/hal-00853382

F. Dell&apos;isola, P. Seppecher, and A. Madeo, How contact interactions may depend on the shape of Cauchy cuts in n-th gradient continua: approacháapproachá la D'Alembert, Z. Angew. Math. Phys. (ZAMP), vol.63, issue.6, pp.1119-1141, 2012.

F. Dell&apos;isola, P. Seppecher, and A. Madeo, Beyond Euler-Cauchy continua: the structure of contact actions in n-th gradient generalized continua: a generalization of the Cauchy tetrahedron argument, Variational Models and Methods in Solid and Fluid Mechanics CISM Courses and Lectures, vol.535, pp.17-106, 2012.

P. Seppecher, J. Alibert, and F. Isola, Linear elastic trusses leading to continua with exotic mechanical interactions, J. Phys. Conf. Ser, vol.319, issue.1, p.12018, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00630098

E. C. Aifantis, On the role of gradients in the localization of deformation and fracture, Int. J. Eng. Sci, vol.30, issue.10, pp.1279-1299, 1992.

E. C. Aifantis, Strain gradient interpretation of size effects, Int. J. Fract, vol.95, issue.1-4, pp.299-314, 1999.

H. Altenbach, V. A. Eremeyev, and L. P. Lebedev, On the existence of solution in the linear elasticity with surface stresses, J. Appl. Math. Mech./Z. Angew. Math. Mech. (ZAMM), vol.90, issue.3, pp.231-240, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00824093

N. Auffray, F. Isola, V. A. Eremeyev, A. Madeo, and G. Rosi, Analytical continuum mechanicsámechanicsá la HamiltonPiola least action principle for second gradient continua and capillary fluids, Math. Mech. Solids, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00836085

A. Javili, F. Isola, and P. Steinmann, Geometrically nonlinear higher-gradient elasticity with energetic boundaries, J. Mech. Phys. Solids, vol.61, issue.12, pp.2381-2401, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00838679

F. Dell&apos;isola and D. Steigmann, A two-dimensional gradient-elasticity theory for woven fabrics, J. Elast, vol.118, issue.1, pp.113-125, 2015.

F. Dell&apos;isola and L. Placidi, Variational principles are a powerful tool also for formulating field theories, Variational Models and Methods in Solid and Fluid Mechanics CISM Courses and Lectures, vol.535, pp.1-15, 2012.

G. Piola, F. Isola, G. Maier, U. Perego, U. Andreaus et al., Memoria di Gabrio Piola presentata al concorso del premio e coronata dall'I.R. Istituto di Scienze, ecc. nella solennita del giorno 4 ottobre 1824, Milano, Imp. Regia stamperia, 1825, The Complete Works of Gabrio Piola, 2014.

F. Dell&apos;isola, U. Andreaus, and L. Placidi, At the origins and in the vanguard of peridynamics, non-local and highergradient continuum mechanics: an underestimated and still topical contribution of Gabrio Piola, Math. Mech. Solids, 2014.

D. Egidio, A. Luongo, A. Paolone, and A. , Linear and non-linear interactions between static and dynamic bifurcations of damped planar beams, Int. J. Non-Linear Mech, vol.42, issue.1, pp.88-98, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00790054

A. Braides, ?-convergence for beginners, Oxford Lecture Series in Mathematics and Its Applications, vol.22, 2002.

A. Braides, M. Solci, and E. Vitali, A derivation of linear elastic energies from pair-interaction atomistic systems, Netw. Heterog. Medias, vol.2, pp.551-567, 2007.

C. Maurini, J. Pouget, and F. Isola, On a model of layered piezoelectric beams including transverse stress effect, Int. J. Solids Struct, vol.41, pp.4473-4502, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00503237

J. Alibert and A. Della-corte, Seppecher, P: Convergence of Hencky-type discrete beam model to Euler inextensible elastica in large deformation: Rigorous proof, Mathematical Modelling in Solid Mechanics. Springer Nature Singapore PTE. LTD, 2017.

H. Reda, Y. Rahali, J. Ganghoffer, and H. Lakiss, Analysis of dispersive waves in repetitive lattices based on homogenized second-gradient continuum models, Compos. Struct, vol.152, pp.712-728, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01415890

H. Reda, Y. Rahali, J. F. Ganghoffer, and H. Lakiss, Nonlinear dynamical analysis of 3D textiles based on second order gradient homogenized media, Compos. Struct, vol.154, pp.538-555, 2016.

H. Reda, Y. Rahali, J. Ganghoffer, and H. Lakiss, Wave propagation in 3D viscoelastic auxetic and textile materials by homogenized continuum micropolar models, Compos. Struct, vol.141, pp.328-345, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01416422

H. Reda, I. Goda, J. F. Ganghoffer, G. Hostis, and H. Lakiss, Dynamical analysis of homogenized second gradient anisotropic media for textile composite structures and analysis of size effects, Compos. Struct, vol.161, pp.540-551, 2017.

Y. Yang and A. Misra, Higher-order stress-strain theory for damage modeling implemented in an element-free Galerkin formulation, Comput. Model. Eng. Sci, vol.64, issue.1, pp.1-36, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00556175

Y. Yang and A. Misra, Micromechanics based second gradient continuum theory for shear band modeling in cohesive granular materials following damage elasticity, Int. J. Solids Struct, vol.49, issue.18, pp.2500-2514, 2012.

A. Misra and P. Poorsolhjouy, Identification of higher-order elastic constants for grain assemblies based upon granular micromechanics, Math. Mech. Complex Syst, vol.3, issue.3, pp.285-308, 2015.

H. Hencky, Uber die angenäherte Lösung von Stabilitätsproblemen im Raum mittels der elastischen Gelenkkette, 1921.

T. Emilio, F. Isola, A. Cazzani, and N. L. Rizzi, Hencky-type discrete model for pantographic structures: numerical comparison with second gradient continuum models, Z. Angew. Math. Phys, vol.67, issue.4, pp.1-28, 2016.

C. M. Wang, . Zhang, . Hui, R. P. Gao, W. H. Duan et al., Hencky bar-chain model for buckling and vibration of beams with elastic end restraints, Int. J. Struct. Stab. Dyn, vol.15, issue.07, p.1540007, 2015.

H. Zhang, C. M. Wang, and N. Challamel, Buckling and vibration of Hencky bar-chain with internal elastic springs, Int. J. Mech. Sci, vol.119, pp.383-395, 2016.
URL : https://hal.archives-ouvertes.fr/hal-02110744

D. G. Fertis, Nonlinear Structural Engineering, 2006.

G. W. Milton, Adaptable nonlinear bimode metamaterials using rigid bars, pivots, and actuators, J. Mech. Phys. Solids, vol.61, issue.7, pp.1561-1568, 2013.
DOI : 10.1016/j.jmps.2012.08.012

URL : http://arxiv.org/pdf/1206.0325

D. Vescovo, D. Giorgio, and I. , Dynamic problems for metamaterials: review of existing models and ideas for further research, Int. J. Eng. Sci, vol.80, pp.153-172, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00947477

F. Dell&apos;isola, S. Bucci, and A. Battista, Against the fragmentation of knowledge: the power of multidisciplinary research for the design of metamaterials, Advanced Methods of Continuum Mechanics for Materials and Structures, pp.523-545, 2016.

F. Dell&apos;isola, D. Steigmann, and A. Della-corte, Synthesis of fibrous complex structures: designing microstructure to deliver targeted macroscale response, Appl. Mech. Rev, vol.67, issue.6, p.60804, 2015.

, ZAMP Extensional Elastica in large deformation as ?-limit Page, vol.17, p.42

D. Davydov, A. Javili, and P. Steinmann, On molecular statics and surface-enhanced continuum modeling of nanostructures, Comput. Mater. Sci, vol.69, pp.510-519, 2013.
DOI : 10.1016/j.commatsci.2012.11.053

I. Giorgio, A. Della-corte, and F. Isola, Buckling modes in pantographic lattices, Comptes Rendus Mecanique, vol.344, issue.7, pp.487-501, 2016.
DOI : 10.1016/j.crme.2016.02.009

URL : https://hal.archives-ouvertes.fr/hal-01294032

F. Dell&apos;isola and D. Steigmann, A two-dimensional gradient-elasticity theory for woven fabrics, J. Elast, vol.118, issue.1, pp.113-125, 2015.

F. Dell&apos;isola, I. Giorgio, and U. Andreaus, Elastic pantographic 2D lattices: a numerical analysis on the static response and wave propagation, Proc. Estonian Acad. Sci, vol.64, issue.3, p.219, 2015.

M. Cuomo, F. Isola, and G. Leopoldo, Simplified analysis of a generalized bias test for fabrics with two families of inextensible fibres, Z. Angew. Math. Phys, vol.67, issue.3, pp.1-23, 2016.

D. J. Steigmann and A. C. Pipkin, Equilibrium of elastic nets, Philos. Trans. R. Soc. Lond. A Math. Phys. Eng. Sci, vol.335, pp.419-454, 1639.

J. Steigmann, On the nonlinear mechanics of discrete networks, Arch. Appl. Mech, vol.67, issue.5, pp.303-319, 1997.

A. Braides, Gamma-Convergence for Beginners, vol.22, 2002.
DOI : 10.1093/acprof:oso/9780198507840.001.0001

L. Schwartz, Radon Measures on Arbitrary Topological Spaces and Cylindrical Measures, vol.6, 1973.

F. Dell&apos;isola, I. Giorgio, M. Pawlikowski, and N. L. Rizzi, Large deformations of planar extensible beams and pantographic lattices: heuristic homogenization, experimental and numerical examples of equilibrium, Proceedings of the Royal Society A, vol.472, p.20150790, 2016.

M. Giaquinta, G. Modica, and J. Soucek, Cartesian Currents in the Calculus of Variations, Modern Surveys in Mathematics, vol.37, 1998.

J. C. Lagarias, J. A. Reeds, M. H. Wright, and P. E. Wright, Convergence properties of the Nelder-Mead simplex method in low dimensions, SIAM J. Optim, vol.9, issue.1, pp.112-147, 1998.

D. Costarelli and R. Spigler, How sharp is the Jensen inequality?, J. Inequal. Appl, vol.2015, issue.1, p.69, 2015.

A. Cazzani, F. Stochino, and E. Turco, On the whole spectrum of Timoshenko beams. Part I: a theoretical revisitation, Z. Angew. Math. Phys, vol.67, issue.2, pp.1-30, 2016.

A. Cazzani, F. Stochino, and E. Turco, On the whole spectrum of Timoshenko beams. Part II further applications, Z. Angew. Math. Phys, vol.67, issue.25, pp.1-21, 2016.

A. Cazzani, M. Malagù, and E. Turco, Isogeometric analysis of plane-curved beams, Math. Mech. Solids, vol.21, issue.5, pp.562-577, 2016.

G. Piccardo, G. Ranzi, and A. Luongo, A complete dynamic approach to the generalized beam theory cross-section analysis including extension and shear modes, Math. Mech. Solids, vol.19, issue.8, pp.900-924, 2014.

G. Piccardo, G. Ranzi, and A. Luongo, A direct approach for the evaluation of the conventional modes within the GBT formulation. Thin-Walled Struct, vol.74, pp.133-145, 2014.

G. Taig, G. Ranzi, D. Dias-da-costa, G. Piccardo, and A. Luongo, A GBT model for the analysis of composite steelconcrete beams with partial shear interaction, In: Structures, vol.4, pp.27-37, 2015.

G. Taig, G. Ranzi, and A. Luongo, GBT pre-buckling and buckling analyses of thin-walled members under axial and transverse loads, Contin. Mech. Thermodyn, vol.28, issue.1-2, pp.41-66, 2016.

G. Piccardo, A. Ferrarotti, and A. Luongo, Nonlinear generalized beam theory for open thin-walled members, Math. Mech. Solids, 2016.

M. B??rsanb??rsan, H. Altenbach, T. Sadowski, V. A. Eremeyev, and D. Pietras, Deformation analysis of functionally graded beams by the direct approach, Compos. Part B Eng, vol.43, issue.3, pp.1315-1328, 2012.

H. Altenbach, M. B??rsanb??rsan, and V. A. Eremeyev, On a thermodynamic theory of rods with two temperature fields, Acta Mech, vol.223, issue.8, pp.1583-1596, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00821509

A. C. Eringen, Nonlocal Continuum Field Theories, 2002.

R. D. Mindlin, Micro-structure in linear elasticity, Arch. Ration. Mech. Anal, vol.16, issue.1, pp.51-78, 1964.

F. Dell&apos;isola and P. Seppecher, The relationship between edge contact forces, double forces and interstitial working allowed by the principle of virtual power, Comptes Rendus de l' Académie des Sciences, p.7, 1995.

F. Dell&apos;isola, P. Seppecher, and A. Madeo, Beyond Euler-Cauchy continua: the structure of contact actions in n-th gradient generalized continua: a generalization of the Cauchy tetrahedron argument, Variational Models and Methods in Solid and Fluid Mechanics, pp.17-106, 2011.

F. Dell&apos;isola, A. Madeo, and P. Seppecher, Cauchy tetrahedron argument applied to higher contact interactions, Arch. Ration. Mech. Anal, vol.219, issue.3, pp.1305-1341, 2016.

L. Placidi, U. Andreaus, and I. Giorgio, Identification of two-dimensional pantographic structure via a linear D4 orthotropic second gradient elastic model, J. Eng. Math, 2016.

A. Javili, F. Isola, and P. Steinmann, Geometrically nonlinear higher-gradient elasticity with energetic boundaries, J. Mech. Phys. Solids, vol.61, issue.12, pp.2381-2401, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00838679

J. Alibert,

L. Placidi, A variational approach for a nonlinear one-dimensional damage-elasto-plastic second-gradient continuum model, Contin. Mech. Thermodyn, vol.28, issue.1-2, pp.119-137, 2016.

L. Placidi, L. Greco, S. Bucci, E. Turco, and N. L. Rizzi, A second gradient formulation for a 2D fabric sheet with inextensible fibres, Z. Angew. Math. Phys, vol.67, issue.5, p.114, 2016.

F. Dell&apos;isola, M. Cuomo, L. Greco, and A. Della-corte, Bias extension test for pantographic sheets: numerical simulations based on second gradient shear energies, J. Eng. Math. pp, pp.1-31, 2016.

L. Placidi, E. Barchiesi, E. Turco, and N. L. Rizzi, A review on 2D models for the description of pantographic fabrics, Z. Angew. Math. Phys, vol.67, issue.5, p.121, 2016.

J. Alibert and A. Della-corte, Second-gradient continua as homogenized limit of pantographic microstructured plates: a rigorous proof, Z. Angew. Math. Phys, vol.66, issue.5, pp.2855-2870, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01279491

A. C. Eringen, Mechanics of micromorphic continua, Mechanics of Generalized Continua, pp.18-35, 1968.

L. Placidi, S. H. Faria, and K. Hutter, On the role of grain growth, recrystallization and polygonization in a continuum theory for anisotropic ice sheets, Ann. Glaciol, vol.39, issue.1, pp.49-52, 2004.

L. Placidi, K. Hutter, and S. H. Faria, A critical review of the mechanics of polycrystalline polar ice, GAMM-Mitteilungen, vol.29, issue.1, pp.80-117, 2006.

L. Placidi, R. Greve, H. Seddik, and S. H. Faria, Continuum-mechanical, anisotropic flow model for polar ice masses, based on an anisotropic flow enhancement factor, Contin. Mech. Thermodyn, vol.22, issue.3, pp.221-237, 2010.

A. Misra and P. Poorsolhjouy, Granular micromechanics based micromorphic model predicts frequency band gaps, Contin. Mech. Thermodyn, vol.28, issue.1-2, pp.215-234, 2016.

S. Forest, Micromorphic approach for gradient elasticity, viscoplasticity, and damage, J. Eng. Mech, vol.135, issue.3, pp.117-131, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00368014

J. Altenbach, H. Altenbach, and V. A. Eremeyev, On generalized cosserat-type theories of plates and shells: a short review and bibliography, Arch. Appl. Mech, vol.80, issue.1, pp.73-92, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00827365

H. Seddik, R. Greve, L. Placidi, I. Hamann, and O. Gagliardini, Application of a continuum-mechanical model for the flow of anisotropic polar ice to the EDML core, Antarctica. J. Glaciol, vol.54, issue.187, pp.631-642, 2008.

A. Carcaterra, F. Isola, R. Esposito, and M. Pulvirenti, Macroscopic description of microscopically strongly inhomogenous systems: a mathematical basis for the synthesis of higher gradients metamaterials, Arch. Ration. Mech. Anal, vol.218, issue.3, pp.1239-1262, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01155474

A. Luongo and F. D&apos;annibale, A paradigmatic minimal system to explain the Ziegler paradox, Contin. Mech. Thermodyn, vol.27, issue.1-2, pp.211-222, 2015.

A. Luongo and F. D&apos;annibale, Double zero bifurcation of non-linear viscoelastic beams under conservative and nonconservative loads, Int. J. Non-Linear Mech, vol.55, pp.128-139, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00909808

A. Luongo and G. Piccardo, Linear instability mechanisms for coupled translational galloping, J. Sound Vib, vol.288, issue.4, pp.1027-1047, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00790779

A. C. Pipkin, Plane traction problems for inextensible networks, The Quarterly Journal of Mechanics and Applied Mathematics, vol.34, issue.4, pp.415-429, 1981.

. Rs-rivlin, Plane strain of a net formed by inextensible cords, Collected Papers of RS Rivlin, pp.511-534, 1997.

S. Forest, Mechanics of generalized continua: construction by homogenizaton, Le Journal de Physique IV, vol.8, issue.PR4, pp.4-39, 1998.

L. Placidi, G. Rosi, I. Giorgio, and A. Madeo, Reeection and transmission of plane waves at surfaces carrying material properties and embedded in second-gradient materials, Mathematics and Mechanics of Solids, vol.19, issue.5, pp.555-578, 2014.

P. Neff, K. Cheªmi«ski, and H. Alber, Notes on strain gradient plasticity: nite strain covariant modelling and global existence in the innnitesimal rate-independent case

, Mathematical Models and Methods in Applied Sciences, vol.19, issue.02, pp.307-346, 2009.

J. Alibert, P. Seppecher, and F. Dell&apos;isola, Truss modular beams with deformation energy depending on higher displacement gradients, Mathematics and Mechanics of Solids, vol.8, issue.1, pp.51-73, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00497327

F. Dell&apos;isola, U. Andreaus, and L. Placidi, At the origins and in the vanguard of peridynamics, non-local and higher-gradient continuum mechanics: An underestimated and still topical contribution of Gabrio Piola, Mathematics and Mechanics of Solids, vol.20, issue.8, pp.887-928, 2014.

M. Assidi, B. B. Boubaker, and J. F. Ganghoffer, Equivalent properties of monolayer fabric from mesoscopic modelling strategies, International Journal of Solids and Structures, vol.48, issue.20, pp.2920-2930, 2011.

F. , D. Reis, and J. F. Ganghoffer, Equivalent mechanical properties of auxetic lattices from discrete homogenization, Computational Materials Science, vol.51, pp.314-321, 2012.

F. Dell, &. Isola, and D. Steigmann, A two-dimensional gradient-elasticity theory for woven fabrics, Journal of Elasticity, vol.118, issue.1, pp.113-125, 2015.
URL : https://hal.archives-ouvertes.fr/hal-00997790

J. Altenbach, H. Altenbach, . Victor, and . Eremeyev, On generalized cosserat-type theories of plates and shells: a short review and bibliography, Archive of Applied Mechanics, vol.80, issue.1, pp.73-92, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00827365

E. Garusi, A. Tralli, and A. Cazzani, An unsymmetric stress formulation for reissner-mindlin plates: A simple and locking-free rectangular element, International Journal of Computational Engineering Science, vol.5, issue.3, pp.589-618, 2004.

A. Rinaldi and L. Placidi, A microscale second gradient approximation of the damage parameter of quasi-brittle heterogeneous lattices

, Mechanik/Journal of Applied Mathematics and Mechanics, 2013.

S. Federico, A. Grillo, and W. Herzog, A transversely isotropic composite with a statistical distribution of spheroidal inclusions: a geometrical approach to overall properties, Journal of the Mechanics and Physics of Solids, vol.52, issue.10, pp.2309-2327, 2004.

P. Neff, On material constants for micromorphic continua, STAMM Proceedings, pp.337-348, 2004.

C. Boutin, Microstructural effects in elastic composites, International Journal of Solids and Structures, vol.33, issue.7, pp.1023-1051, 1996.
URL : https://hal.archives-ouvertes.fr/hal-00940462

S. Federico, On the linear elasticity of porous materials, International Journal of Mechanical Sciences, vol.52, issue.2, pp.175-182, 2010.

P. Neff, I. Ghiba, A. Madeo, L. Placidi, and G. Rosi, A unifying perspective: the relaxed linear micromorphic continuum, Continuum Mechanics and Thermodynamics, pp.1-43, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01167202

L. Placidi and K. Hutter, Thermodynamics of polycrystalline materials treated by the theory of mixtures with continuous diversity, Continuum Mechanics and Thermodynamics, vol.17, pp.409-451, 2006.

J. Della-corte, Second-gradient continua as homogenized limit of pantographic microstructured plates: a rigorous proof, vol.66, pp.2855-2870, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01279491

P. Neff and S. Forest, A geometrically exact micromorphic model for elastic metallic foams accounting for aane microstructure. modelling, existence of minimizers, identiication of moduli and computational results, Journal of Elasticity, vol.87, issue.2-3, pp.239-276, 2007.
DOI : 10.1007/s10659-007-9106-4

R. D. Mindlin, Micro-structure in linear elasticity. Archive for Rational Mechanics and Analysis, vol.16, pp.51-78, 1964.
DOI : 10.1007/bf00248490

URL : http://venus.usc.edu/PAPERS/MultiScaleMechanics/Microstructure-Linear-Elasticity-Mindlin.pdf

A. Misra and Y. Yang, Micromechanical model for cohesive materials based upon pseudogranular structure, International Journal of Solids and Structures, vol.47, pp.2970-2981, 2010.
DOI : 10.1016/j.ijsolstr.2010.07.002

URL : https://hal.archives-ouvertes.fr/hal-00556078

A. Madeo, P. Neff, . Ionel-dumitrel, L. Ghiba, G. Placidi et al., Wave propagation in relaxed micromorphic continua: modeling metamaterials with frequency bandgaps, Continuum Mechanics and Thermodynamics, pp.1-20, 2013.
DOI : 10.1007/s00161-013-0329-2

URL : http://arxiv.org/pdf/1309.1722

M. Ferretti, A. Madeo, F. Dell&apos;isola, and P. Boisse, Modeling the onset of shear boundary layers in brous composite reinforcements by second-gradient theory, vol.65, pp.587-612, 2014.

P. Seppecher, J. Alibert, and F. D. Isola, Linear elastic trusses leading to continua with exotic mechanical interactions, Journal of Physics: Conference Series, vol.319, p.12018, 2011.
DOI : 10.1088/1742-6596/319/1/012018

URL : https://hal.archives-ouvertes.fr/hal-00630098

A. Grillo, S. Federico, G. Wittum, S. Imatani, G. Giaquinta et al., Evolution of a bre-reinforced growing mixture, Nuovo Cimento C, vol.32, issue.1, pp.97-119, 2009.

A. Grillo, G. Wittum, A. Tomic, and S. Federico, Remodelling in statistically oriented brereinforced materials and biological tissues, Mathematics and Mechanics of Solids, 2014.
DOI : 10.1177/1081286513515265

A. Grillo, S. Federico, and G. Wittum, Growth, mass transfer, and remodeling in berreinforced, multi-constituent materials, International Journal of Non-Linear Mechanics, vol.47, issue.2, pp.388-401, 2012.
DOI : 10.1016/j.ijnonlinmec.2011.09.026

N. Hamila and P. Boisse, Locking in simulation of composite reinforcement deformations. analysis and treatment, Composites Part A: Applied Science and Manufacturing, vol.53, pp.109-117, 2013.
DOI : 10.1016/j.compositesa.2013.06.001

URL : https://hal.archives-ouvertes.fr/hal-00938611

A. Misra and V. Singh, Micromechanical model for viscoelastic-materials undergoing damage, Continuum Mechanics and Thermodynamics, vol.25, pp.1-16, 2013.
DOI : 10.1007/s00161-012-0262-9

D. Scerrato, I. Giorgio, A. Madeo, A. Limam, and F. Darve, A simple non-linear model for internal friction in modiied concrete, International Journal of Engineering Science, vol.80, pp.136-152, 2014.
DOI : 10.1016/j.ijengsci.2014.02.021

URL : https://hal.archives-ouvertes.fr/hal-00864497/document

C. P. Laurent, D. Durville, C. Vaquette, R. Rahouadj, and J. F. Ganghoffer, Computer-aided tissue engineering: Application to the case of anterior cruciate ligament repair, Biomechanics of Cells and Tissues, vol.9, pp.1-44, 2013.
DOI : 10.1007/978-94-007-5890-2_1

URL : https://hal.archives-ouvertes.fr/hal-00825072

C. P. Laurent, D. Durville, D. Mainard, J. Ganghoffer, and R. Rahouadj, Designing a new scaffold for anterior cruciate ligament tissue engineering, Journal of the mechanical behavior of biomedical materials, vol.12, pp.184-196, 2012.
DOI : 10.1080/10255842.2010.494033

C. P. Laurent, D. Durville, X. Wang, J. Ganghoffer, and R. Rahouadj, Designing a new scaffold for anterior cruciate ligament tissue engineering, Computer Methods in Biomechanics and Biomedical Engineering, vol.13, issue.S1, pp.87-88, 2010.
DOI : 10.1080/10255842.2010.494033

I. Goda, M. Assidi, S. Belouettar, and J. F. Ganghoffer, A micropolar anisotropic constitutive model of cancellous bone from discrete homogenization, Journal of the Mechanical Behavior of Biomedical Materials, vol.16, pp.87-108, 2012.
DOI : 10.1016/j.jmbbm.2012.07.012

S. J. Hollister, Porous scaffold design for tissue engineering, Nature materials, vol.4, issue.7, pp.518-524, 2005.

A. Grillo and G. Wittum, Growth and mass transfer in multi-constituent biological materials, AIP Conference Proceedings, vol.1281, issue.1, pp.355-358, 2010.
DOI : 10.1063/1.3498474

U. Andreaus, I. Giorgio, and T. Lekszycki, A 2-D continuum model of a mixture of bone tissue and bio-resorbable material for simulating mass density redistribution under load slowly variable in time, Angewandte Mathematik und Mechanik / Journal of Applied Mathematics and Mechanics, vol.94, issue.12, pp.978-1000, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00842604

I. Giorgio, U. Andreaus, and A. Madeo, The innuence of different loads on the remodeling process of a bone and bio-resorbable material mixture with voids, Continuum Mechanics and Thermodynamics, 2014.

F. Dell&apos;isola, M. Agostino, A. Madeo, P. Boisse, and D. Steigmann, Minimization of shear energy in two dimensional continua with two orthogonal families of inextensible bers: the case of standard bias extension test, Journal of Elasticity, 2015.

F. Dell&apos;isola and L. Placidi, Variational principles are a powerful tool also for formulating eld theories, Variational Models and Methods in Solid and Fluid Mechanics, 2012.

L. Placidi, A variational approach for a nonlinear one-dimensional damage-elasto-plastic secondgradient continuum model, Continuum Mechanics and Thermodynamics, p.23

, , 2014.

L. Placidi, A variational approach for a nonlinear 1-dimensional second gradient continuum damage model, Continuum Mechanics and Thermodynamics, 2014.

M. John and . Ball, Convexity conditions and existence theorems in nonlinear elasticity. Archive for rational mechanics and Analysis, vol.63, pp.337-403, 1976.

A. Victor, L. P. Eremeyev, and . Lebedev, Existence of weak solutions in elasticity, Mathematics and Mechanics of Solids, vol.18, issue.2, pp.204-217, 2013.

S. Federico, On the volumetric-distortional decomposition of deformation in elasticity, Mathematics and Mechanics of Solids, vol.15, issue.6, pp.672-690, 2010.

S. Federico, A. Grillo, and S. Imatani, The linear elasticity tensor of incompressible materials, Mathematics and Mechanics of Solids

V. A. Yeremeyev, A. B. Freidin, and L. L. Sharipova, The stability of the equilibrium of two-phase elastic solids, Journal of Applied Mathematics and Mechanics, vol.71, issue.1, pp.61-84, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00831678

W. Pietraszkiewicz, V. Eremeyev, and V. Konopi«ska, Extended non-linear relations of elastic shells undergoing phase transitions
URL : https://hal.archives-ouvertes.fr/hal-00831047

, Mechanik / Journal of Applied Mathematics and Mechanics, vol.87, issue.2, pp.150-159, 2007.

V. A. Eremeyev and W. Pietraszkiewicz, Phase transitions in thermoelastic and thermoviscoelastic shells, Archives of Mechanics, vol.61, issue.1, pp.41-67, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00826796

V. A. Eremeyev and W. Pietraszkiewicz, Thermomechanics of shells undergoing phase transition, Journal of the Mechanics and Physics of Solids, vol.59, issue.7, pp.1395-1412, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00835667

A. Luongo, Perturbation methods for nonlinear autonomous discrete-time dynamical systems, Nonlinear Dynamics, vol.10, issue.4, pp.317-331, 1996.

E. Turco and P. Caracciolo, Elasto-plastic analysis of kirchhoff plates by high simplicity nite elements, Computer Methods in Applied Mechanics and Engineering, vol.190, issue.5-7, pp.691-706, 2000.

A. Cazzani, M. Malagù, and E. Turco, Isogeometric analysis of plane-curved beams. Mathematics and Mechanics of Solids, 2014.

L. Greco, N. Impollonia, and M. Cuomo, A procedure for the static analysis of cable structures following elastic catenary theory, International Journal of Solids and Structures, vol.51, issue.7, pp.1521-1533, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00954208

L. Carassale and G. Piccardo, Non-linear discrete models for the stochastic analysis of cables in turbulent wind, International Journal of Non-Linear Mechanics, vol.45, issue.3, pp.219-231, 2010.

A. Cazzani and M. Rovati, Sensitivity analysis and optimum design of elastic-plastic structural systems, Meccanica, vol.26, issue.2-3, pp.173-178, 1991.

B. Descamps, Computational Design of Lightweight Structures: Form Finding and Optimization, 2014.

U. Andreaus and M. Colloca, Prediction of micromotion initiation of an implanted femur under physiological loads and constraints using the nite element method, Proc Inst Mech Eng H, vol.223, issue.5, pp.589-605, 2009.

L. Greco and M. Cuomo, B-Spline interpolation of Kirchhoff-Love space rods, Computer Methods in Applied Mechanics and Engineering, vol.256, issue.0, pp.251-269, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00874611

L. Greco and M. Cuomo, An implicit G1 multi patch B-spline interpolation for Kirchhoff-Love space rod, Computer Methods in Applied Mechanics and Engineering, vol.269, issue.0, pp.173-197, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00874299

A. Javili and P. Steinmann, A nite element framework for continua with boundary energies. part i: The two-dimensional case, Computer Methods in Applied Mechanics and Engineering, vol.198, issue.27, pp.2198-2208, 2009.

A. Javili and . Steinmann, A nite element framework for continua with boundary energies. part ii: The three-dimensional case, Computer Methods in Applied Mechanics and Engineering, vol.199, issue.9, pp.755-765, 2010.

A. Berezovski, I. Giorgio, and A. D. Corte, Interfaces in micromorphic materials: Wave transmission and reeection with numerical simulations, Mathematics and Mechanics of Solids, 2015.

U. Andreaus, M. Colloca, and D. Iacoviello, Modeling of Trabecular Architecture as Result of an Optimal Control Procedure, Lecture Notes in Computational Vision and Biomechanics, vol.4, 2013.

U. Andreaus, M. Colloca, and D. Iacoviello, An optimal control procedure for bone adaptation under mechanical stimulus, Control Engineering Practice, vol.20, issue.6, pp.575-583, 2012.

U. Andreaus, M. Colloca, D. Iacoviello, and M. Pignataro, Optimal-tuning pid control of adaptive materials for structural eeciency. Structural and Multidisciplinary Optimization, vol.43, pp.43-59, 2011.

. Va-eremeyev, Nonlinear micropolar shells: theory and applications, Shell structures: Theory and applications, pp.11-18, 2005.

V. A. Eremeyev, The effective stiffness of a nanoporous rod, Doklady Physics, vol.55, pp.279-282, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00831244

H. Altenbach, A. Victor, N. F. Eremeyev, and . Morozov, Mechanical properties of materials considering surface effects, IUTAM Symposium on Surface Effects in the Mechanics of Nanomaterials and Heterostructures, pp.105-115, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00824006

M. Bîrsan, H. Altenbach, T. Sadowski, D. Va-eremeyev, and . Pietras, Deformation analysis of functionally graded beams by the direct approach, Composites Part B: Engineering, vol.43, issue.3, pp.1315-1328, 2012.

G. Piccardo, G. Ranzi, and A. Luongo, A complete dynamic approach to the generalized beam theory cross-section analysis including extension and shear modes, Mathematics and Mechanics of Solids, vol.19, issue.8, pp.900-924, 2014.

G. Piccardo and F. Tubino, Dynamic response of euler-bernoulli beams to resonant harmonic moving loads, Structural Engineering and Mechanics, vol.44, issue.5, pp.681-704, 2012.

C. Boutin, S. Hans, and C. Chesnais, Generalized beams and continua. dynamics of reticulated structures, Mechanics of Generalized Continua, pp.131-141, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00941153

I. Giorgio, A. Culla, and D. D. Vescovo, Multimode vibration control using several piezoelectric transducers shunted with a multiterminal network, Archive of Applied Mechanics, vol.79, issue.9, pp.859-879, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00798627

D. , D. Vescovo, and I. Giorgio, Dynamic problems for metamaterials: review of existing models and ideas for further research, International Journal of Engineering Science, vol.80, pp.153-172, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00947477

A. Luongo, D. Zulli, and G. Piccardo, A linear curved-beam model for the analysis of galloping in suspended cables, Journal of Mechanics of Materials and Structures, vol.2, issue.4, pp.675-694, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00789166

G. Piccardo, L. C. Pagnini, and F. Tubino, Some research perspectives in galloping phenomena: critical conditions and post-critical behavior, Continuum Mechanics and Thermodynamics, vol.27, issue.1-2, pp.261-285, 2015.

U. Andreaus, M. Spagnuolo, T. Lekszycki, S. Eugster, and F. Dell&apos;isola, Geometrically nonlinear static analysis of planar pantographic structures, 2017.

U. Andreaus, M. Spagnuolo, and A. Della-corte, Discrete geometrically nonlinear pantographic structures: numerics and experiments, 2017.

F. Dell&apos;isola, M. Cuomo, L. Greco, and A. Della-corte, Bias extension test for pantographic sheets: numerical simulations based on second gradient shear energies, Journal of Engineering Mathematics, vol.103, issue.1, pp.127-157, 2017.

E. Turco, F. Isola, N. L. Rizzi, R. Grygoruk, W. H. Muller et al., Fiber rupture in sheared planar pantographic sheets: Numerical and experimental evidence, Mechanics Research Communications, vol.76, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01354961

, Elastica) with distributed load: large deformations 2nd Reading, vol.16, pp.45-103, 2017.

B. E. Abali, W. H. Müller, and V. A. Eremeyev, Strain gradient elasticity with geometric nonlinearities and its computational evaluation, Adv. Mater. Mod. Process, p.1, 2015.

J. J. Alibert, P. Seppecher, and F. , Truss modular beams with deformation energy depending on higher displacement gradients, Math. Mech. Solids, vol.8, pp.51-73, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00497327

S. S. Antman, Nonlinear Problems of Elasticity, 1995.

D. Bernoulli, The 26th letter to Euler, Correspondence Mathmatique et Physique, vol.2, 1742.

J. Bernoulli, Quadratura curvae, e cujus evolutione describitur inflexae laminae curvatura, Die Werke von Jakob Bernoulli, pp.223-227

K. E. Bisshopp and D. C. Drucker, Large deflection of cantilever beams, Quart. Appl. Math, vol.3, pp.272-275, 1945.

M. Born, Untersuchungen uber die Stabilitat der elastischen Linie in Ebene und Raum, under verschiedenen Grenzbedingungen, 1906.

B. Dacorogna, Direct Methods in the Calculus of Variations, vol.78, 2007.

F. Isola, I. Giorgio, M. Pawlikowski, and N. L. Rizzi, Large deformations of planar extensible beams and pantographic lattices: Heuristic homogenization, experimental and numerical examples of equilibrium, Proc. Roy. Soc. A, vol.472, pp.45-103, 2016.

A. Della-corte,

F. Isola, T. Lekszycki, M. Pawlikowski, R. Grygoruk, and L. Greco, Designing a light fabric metamaterial being highly macroscopically tough under directional extension: First experimental evidence, Z. Math. Phys, vol.66, pp.3473-3498, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01180475

F. Isola, D. Steigmann, and A. Della-corte, Synthesis of fibrous complex structures: Designing microstructure to deliver targeted macroscale response, Appl. Mech. Rev, vol.67, p.pp, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01284511

L. Euler, Methodus inveniendi lineas curvas maximi minimive proprietate gaudentes, sive solutio problematis isoperimetrici lattissimo sensu accepti, 1744.

L. C. Evans, Partial Differential Equations, 2010.

M. G. Faulkner, A. W. Lipsett, and V. Tam, On the use of a segmental shooting technique for multiple solutions of planar elastica problems, Comput. Meth. Appl. Mech. Eng, vol.110, pp.221-236, 1993.

D. G. Fertis, Nonlinear Structural Engineering, 2006.

I. Fonseca and G. Leoni, Modern Methods in the Calculus of Variations: L p Spaces, 2007.

S. Forest and R. Sievert, Nonlinear microstrain theories, Int. J. Solids Struct, vol.43, pp.7224-7245, 2006.
DOI : 10.1016/j.ijsolstr.2006.05.012

URL : https://hal.archives-ouvertes.fr/hal-00136739

I. Fried, Stability and equilibrium of the straight and curved elastica-finite element computation, Comput. Meth. Appl. Mech. Eng, vol.28, pp.49-61, 1981.

P. Germain, The method of virtual power in continuum mechanics. Part 2: Microstructure, SIAM J. Appl. Math, vol.25, pp.556-575, 1973.

A. J. Kudrila and M. Zabarankin, Convex Functional Analysis, 2006.

P. Ladevèze, Nonlinear Computational Structural Mechanics: New Approaches and Non-Incremental Methods of Calculation, 2012.

J. L. Lagrange and M. Analytique, , vol.1, 1853.

G. W. Milton, Adaptable nonlinear bimode metamaterials using rigid bars, pivots, and actuators, J. Mech. Phys. Solids, vol.61, pp.1561-1568, 2013.
DOI : 10.1016/j.jmps.2012.08.012

URL : http://arxiv.org/pdf/1206.0325

R. D. Mindlin and N. N. Eshel, On first strain-gradient theories in linear elasticity, Int. J. Solids Struct, vol.4, pp.109-124, 1968.

M. G. Mora and S. Müller, A nonlinear model for inextensible rods as a low energy ?limit of three-dimensional nonlinear elasticity, Ann. l'IHP Anal. Nonlinaire, vol.21, pp.271-293, 2004.

C. Pideri and P. Seppecher, A second gradient material resulting from the homogenization of an heterogeneous linear elastic medium, Contin. Mech. Thermodynam, vol.9, pp.241-257, 1997.
URL : https://hal.archives-ouvertes.fr/hal-00527291

C. Pideri and P. Seppecher, Asymptotics of a non-planar rod in nonlinear elasticity, Asympt. Anal, vol.48, pp.33-54, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00527296

A. C. Pipkin, Plane traction problems for inextensible networks, Quart. J. Mech. Appl. Math, vol.34, pp.415-429, 1981.

D. W. Raboud, M. G. Faulkner, and A. W. Lipsett, Multiple three-dimensional equilibrium solutions for cantilever beams loaded by dead tip and uniform distributed loads, Int. J. Nonlinear Mech, vol.31, pp.297-311, 1996.
DOI : 10.1016/0020-7462(95)00070-4

R. S. Rivlin, Networks of inextensible cords, Collected Papers of R. S. Rivlin, pp.566-579, 1997.
DOI : 10.1007/978-1-4612-2416-7_38

D. Scerrato, I. Giorgio, and N. L. Rizzi, Three-dimensional instabilities of pantographic sheets with parabolic lattices: Numerical investigations, Z. Math. Phys, vol.67, pp.45-103, 2016.
DOI : 10.1007/s00033-016-0650-2

URL : https://hal.archives-ouvertes.fr/hal-01305927

, Equilibria of a clamped Euler beam (Elastica) with distributed load 31

D. Sullivan, Combinatorial invariants of analytic spaces, Proc. Liverpool Singularities Symp. I, p.165, 1971.

L. Tonelli, Opere scelte: Calcolo delle variazioni, vol.2, 1961.

E. Turco, F. Dell&apos;isola, A. Cazzani, and N. L. Rizzi, Hencky-type discrete model for pantographic structures: Numerical comparison with second gradient continuum models, Z. Math. Phys, vol.67, pp.1-28, 2016.
DOI : 10.1007/s00033-016-0681-8

URL : https://hal.archives-ouvertes.fr/hal-01345864