,
,
Analyse des mécanismes de déformation en fluage traction à hautes températures ,
,
3.b. Nature et teneur en phases secondaires ,
,
1.c. Discussion sur l'influence de la température ,
Discussion générale sur l'influence de la microstructure ,
3.c. Quelle place pour les phases MAX ? ,
Synthesis of Ti3AlC2 Powders Using Sn as an Additive, Journal of the American Ceramic Society, vol.89, issue.3, pp.1114-1131, 2006. ,
High-Temperature Oxidation Behavior of Un-Dense Ti3AlC2 Material at 1000°C in Air, Ceramics International, vol.38, issue.3, pp.2537-2578, 2012. ,
Trainable Weka Segmentation: A Machine Learning Tool for Microscopy Image Segmentation, Automated Anatomical Techniques: Neuronal Reconstruction, Tract Tracing, and Atlasing, pp.73-80, 2014. ,
The Influence of Polycrystal Grain Size on Several Mechanical Properties of Materials, Metallurgical and Materials Transactions, vol.1, issue.5, pp.1169-76, 1970. ,
Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration, 2001. ,
Standard Test Methods for Determining Average Grain Size, ASTM International E112, vol.12, 2012. ,
High Temperature Physical and Mechanical Properties of Large-Scale Ti2AlC Bulk Synthesized by Self-Propagating High Temperature Combustion Synthesis with Pseudo Hot Isostatic Pressing, Journal of the European Ceramic Society, vol.33, pp.2435-2480, 2013. ,
Microstructures, Electrical, Thermal, and Mechanical Properties of Bulk Ti2AlC Synthesized by Self-Propagating High-Temperature Combustion Synthesis with Pseudo Hot Isostatic Pressing, Journal of America Ceramic Society, vol.95, issue.1, pp.358-64, 2012. ,
Shear Strength and Shear Failure of Layered Machinable Ti3AlC2 Ceramics, Journal of the European Ceramic Society, vol.24, issue.5, pp.855-60, 2004. ,
Electron-Backscattered Diffraction and Transmission Electron Microscopy Study of Post-Creep Ti3SiC2, Journal of Alloys and Compounds, vol.488, issue.1, pp.181-89, 2009. ,
Oxidation Of Ti3SiC2 in Air, Journal of The Electrochemical Society, vol.144, issue.7, p.2508, 1997. ,
Physical Properties of the MAX Phases, Encyclopedia of Materials: Science and Technology, no. Table, vol.1, pp.1-11, 2000. ,
The Mn+1AXn Phases : A New Class of Solids, Progress in Solid State Chemistry, vol.28, issue.1-4, pp.6-6, 2000. ,
MAX Phases: Properties of Machinable Ternary Carbides and Nitrides, In. Weinheim: Wiley VCH, 2013. ,
Processing and Characterization of Ti2AlC, Ti2AlN, and Ti2AlC0.5N0.5, Metallurgical and Materials Transactions A, vol.31, pp.1857-65, 2000. ,
Synthesis and Characterization of a Remarkable Ceramic: Ti3SiC2, Journal of American Ceramic Society, vol.79, issue.7, pp.1953-56, 1996. ,
Room-Temperature Ductile Carbides, Metallurgical and Materials Transactions A, vol.30, pp.363-69, 1999. ,
Long Time Oxidation Study of Ti3SiC2, Ti3SiC2/SiC, and Ti3SiC2/TiC Composites in Air, Journal of The Electrochemical Society, vol.150, issue.4, p.166, 2003. ,
Elastic and Mechanical Properties of the MAX Phases, Annual Review of Materials Research, vol.41, issue.1, pp.195-227, 2011. ,
Oxidation of Tin+1AlXn (n=1-3 and X=C, N): II. Experimental Results, Journal of The Electrochemical Society, vol.148, issue.8, p.551, 2001. ,
Long-Term Oxidation of Ti2AlC in Air and Water Vapor at 1000-1300°C Temperature Range, Journal of The Electrochemical Society, vol.159, issue.2, p.90, 2012. ,
Analyse EBSD Principe et cartographies d'orientations, Techniques de l'ingénieur Essais métallographiques des métaux et alliages base docum (ref. article : m4138). Editions T.I, 2010. ,
Synthesis, Microstructural Characterization and Mechanical Properties of Nanolaminated Ti3AlxSn(1-x)C2 MAX Phases, 2011. ,
Synthesis, Characterization, and Intrinsic Hardness of Layered Nanolaminate Ti3AlC2 and Ti3Al0.8Sn0.2C2 Solid Solution, Journal of the American Ceramic Society, vol.95, issue.1, pp.102-109, 2012. ,
Pressure-Enforced Plasticity in MAX Phases: From Single Grain to Polycrystal Investigation, Philosophical Magazine, vol.93, issue.15, pp.1784-1801, 2013. ,
URL : https://hal.archives-ouvertes.fr/hal-01501851
Room Temperature StressStrain Hysteresis in Ti2AlC Revisited, Acta Materialia, vol.105, pp.294-305, 2016. ,
A Comprehensive Study of the Carbon Contamination in Tellurite Glasses and Glass-Ceramics Sintered by Spark Plasma Sintering (SPS), Journal of the American Ceramic Society, vol.97, issue.1, pp.163-72, 2014. ,
URL : https://hal.archives-ouvertes.fr/hal-00945981
Heterogeneous Strain Evolution in Representative Polycrystalline MAX Phases, International Journal of Solids and Structures, vol.81, pp.13-22, 2016. ,
, Introduction to the High-Temperature Oxidation of Metals. Cambridge, 2006.
Fabrication of Graphite Contamination Free Polycrystalline Transparent MgAl2O4 Spinel by Spark Plasma Sintering Using Platinum Foil, Ceramics International, vol.42, issue.15, pp.17920-17943, 2016. ,
Measurement of Stress Due to Thermal Expansion Anisotropy in Al2O3, Journal of the American Ceramic Society, vol.65, issue.3, pp.174-78, 1982. ,
A Probabilistic Model for Prediction of LCF Surface Crack Initiation in PM Alloys, Fatigue & Fracture of Engineering Materials and Structures, vol.16, issue.8, pp.861-74, 1993. ,
Effect of an Applied Stress on the Growth Kinetics of Oxide Scales Formed on Ni-20Cr Alloys, Materials at High Temperatures, vol.18, issue.2, pp.91-99, 2001. ,
A Computational Approach to Edge Detection, IEEE Transactions on Pattern Analysis and Machine Intelligence PAMI, vol.8, issue.6, pp.679-98, 1986. ,
Polysynthetic Twinned TiAl Single Crystals for High-Temperature Applications, Nature Materials, vol.15, issue.8, pp.876-81, 2016. ,
Strength and Tension/compression Asymmetry in Nanostructured and Ultrafine-Grain Metals, Acta Materialia, vol.51, issue.15, pp.286-292, 2003. ,
Water Vapor Effect on High-Temperature Oxidation Behavior of Fe3Al Intermetallics, Science and Technology of Advanced Materials, vol.10, issue.4, p.45006, 2009. ,
Microstructural Evolution during High-Temperature Oxidation of Ti2AlC Ceramics, Acta Materialia, vol.59, issue.10, pp.4116-4141, 2011. ,
TEM Study of the Early Stages of Ti2AlC Oxidation at 900°C, Scripta Materialia, vol.67, issue.10, pp.830-863, 2012. ,
Caractérisation Expérimentale Des Matériaux: Propriétés Physiques, Thermiques et Mécaniques, vol.1, 2007. ,
Long-Term Creep and Creep Rupture Characteristics of TiAl-Base Intermetallics, Materials Science and Engineering: A, vol.510, issue.511, pp.350-55, 2009. ,
Superalloys: A Technical Guide, 2002. ,
Air Oxidation Behaviour of Ti-6Al-4V Alloy between 650 and 850°C, Corrosion Science, vol.36, issue.4, pp.90069-90077, 1994. ,
Synthesis of High-Purity , Isotropic or Textured Cr2AlC Bulk Ceramics by a Two-Step Sintering Process, Journal of European Ceramic Society, vol.35, pp.1393-1400, 2015. ,
Synthesis, Microstructure, and Mechanical Properties of Ti3Sn(1?x)AlxC2 MAX Phase Solid Solutions, International Journal of Applied Ceramic Technology, vol.7, pp.719-748, 2010. ,
Processing and Mechanical Properties of Ti3SiC2: I, Reaction Path and Microstructure Evolution, Journal of the American Ceramic Society, vol.82, issue.10, pp.2849-54, 1999. ,
Processing and Mechanical Properties of Ti3SiC2 : II , Effect of Grain Size and Deformation Temperature, Journal of American Ceramic Society, vol.60, issue.10, pp.2855-60, 1999. ,
Influence of SPS Parameters on the Density and Mechanical Properties of Sintered Ti3SiC2 Powders, International Journal of Refractory Metals and Hard Materials, vol.41, pp.48-53, 2013. ,
Dislocations and Stacking Faults in Ti3SiC2, Journal of the American Ceramic Society, vol.81, issue.6, pp.1677-81, 1998. ,
High-Resolution Transmission Electron Microscopy of a Low-Angle Boundary in Plastically Deformed Ti3SiC2, Philosophical Magazine Letters, vol.79, issue.4, 1999. ,
Low Temperature Dependence of the Elastic Properties of Ti3SiC2, Journal of Applied Physics, vol.85, issue.10, p.7123, 1999. ,
Low Temperature Dependencies of the Elastic Properties of Ti4AlN3, Ti3Al1.1C1.8, and Ti3SiC2, J. Appl. Phys, vol.87, pp.1701-1704, 2000. ,
Rapid Synthesis of Dense Ti3SiC2 by Spark Plasma Sintering, Journal of European Ceramic Society, vol.22, pp.2365-70, 2002. ,
Self-Propagating High-Temperature Synthesis of Ti3SiC2: Study of the Reaction Mechanisms by Time-Resolved X-Ray Diffraction and Infrared Thermography, Journal Of The American Ceramic Society, vol.89, issue.9, pp.2899-2907, 2006. ,
Combustion Synthesis of Ternary Carbide Ti3AlC2 in Ti-Al-C System, Journal of the European Ceramic Society, vol.23, issue.3, pp.567-74, 2003. ,
Preparation of Ti3SiC2 by Electron-Beam-Ignited Solid-State Reaction, Journal of American Ceramic Society, vol.81, pp.3025-3053, 1998. ,
Mécanismes de Déformation Des Phases MAX : Une Approche Expérimentale MultiÉchelle, 2013. ,
Dislocation Analysis of Ti2AlN Deformed at Room Temperature under Confining Pressure, Philosophical Magazine, vol.92, issue.36, pp.1-11, 2012. ,
Evidence of Dislocation Cross-Slip in MAX Phase Deformed at High Temperature, Scientific Reports, vol.4, p.6358, 2014. ,
URL : https://hal.archives-ouvertes.fr/hal-01503720
Effect of Microstructure Anisotropy on the Deformation of MAX Polycrystals Studied by in-Situ Compression Combined with Neutron Diffraction, Applied Physics Letters, vol.104, issue.24, p.241910, 2014. ,
URL : https://hal.archives-ouvertes.fr/hal-01503721
Synthesis and Mechanical Properties of Ti3AlC2 by Hot Pressing TiCx/Al Powder Mixture, Journal of the European Ceramic Society, vol.28, issue.5, pp.979-88, 2008. ,
Formation Mechanism of Ti2AlC under the Self-Propagating High-Temperature Synthesis (SHS) Mode, Materials Research Bulletin, vol.47, issue.5, pp.1164-68, 2012. ,
Pressureless Sintering and Mechanical Properties of Titanium Aluminum Carbide, Materials Letters, vol.62, pp.1480-83, 2008. ,
High Temperature Creep Behavior of in-Situ TiC Particulate Reinforced Fe-Cr-Ni Matrix Composite, Materials Science and Engineering: A, vol.282, issue.1-2, pp.187-92, 2000. ,
, The Absence of Plasma In 'spark Plasma Sintering, vol.104, p.33305, 2008.
The Influence of Inclusions on Low Cycle Fatigue Life in a P/M Nickel-Base Disk Superalloy, Superalloys, pp.359-68, 1996. ,
The Effect of Ceramic Inclusions on the Low Cycle Fatigue Life of Low Carbon Astroloy Subjected to Hot Isostatic Pressing, Materials Science and Engineering, vol.48, issue.2, pp.189-98, 1981. ,
Interactions of Water Vapor with Oxides at Elevated Temperatures, Journal of Physics and Chemistry of Solids, vol.66, issue.2-4, pp.471-78, 2005. ,
Achieving Uniform Microstructure and Superior Mechanical Properties in Ultrafine Grained TiB2-TiSi2 Composites Using Innovative Multi Stage Spark Plasma Sintering, Materials Science and Engineering A, vol.528, issue.1, pp.200-207, 2010. ,
Effect of Al Addition on Phase Purity of Ti3Si(Al)C2 Synthesized by Mechanical Alloying, Journal of Materials Processing Technology, vol.182, issue.1-3, pp.445-494, 2007. ,
On the Relevance of Kinking to Reversible Hysteresis in MAX Phases, Acta Materialia, vol.69, pp.149-61, 2014. ,
Revisiting the Defects Structure of MAX Phases: The Case of Ti4AlN3, Philosophical Magazine, vol.88, issue.9, pp.1307-1327, 2008. ,
Deformation Induced Anisotropic Responses of Ti-6Al-4V Alloy. Part I: Experiments, International Journal of Plasticity, vol.38, pp.14-26, 2012. ,
Ti2AlC Ternary Carbide Synthesized by Thermal Explosion, Materials Letters, vol.57, issue.1, pp.72-76, 2002. ,
Pressure-Assisted Combustion Synthesis of Dense Layered Ti3AlC2 and Its Mechanical Properties, Journal of the American Ceramic Society, vol.88, issue.1, pp.28-33, 2004. ,
Techniques de l'ingénieur Caractérisation des fluides, no. ref, p.2360, 1995. ,
Ti3SiC2: A Damage Tolerant Ceramic Studied with Nano-Indentations and Transmission Electron Microscopy, Acta Materialia, vol.51, issue.10, pp.2859-72, 2003. ,
Thermal Expansion of Rutile and Anatase, Journal of the American Ceramic Society, vol.53, issue.3, pp.124-150, 1970. ,
Mechanochemical Syntheses of Titanium Carbide, Diboride and Nitride, Journal of the Ceramic Society of Japan, vol.107, pp.1019-1043, 1251. ,
Cyclic Oxidation of Cr2AlC between 1000 and 1300°C in Air, Journal of Alloys and Compounds, vol.464, issue.1-2, pp.434-473, 2008. ,
Long-Time Oxidation of Cr2AlC between 700 and 1,000°C in Air, Oxidation of Metals, vol.77, issue.5-6, pp.275-87, 2012. ,
High-Temperature Oxidation of Ti3AlC2 between 1173 and 1473K in Air, Materials Science and Engineering: A, vol.434, issue.1-2, pp.147-54, 2006. ,
Oxidation of Cr2AlC Between 900 and 1200°C in Air, Oxidation of Metals, vol.68, issue.5, pp.211-233, 2007. ,
Oxidation of Ti3SiC2 between 900 and 1200°C in Air, Oxidation of Metals, vol.67, issue.5, pp.51-66, 2007. ,
Initial Stages of Oxidation of Inconel 718 by FTIR Spectroscopy, Materials Research Bulletin, vol.25, issue.6, p.90199, 1990. ,
Mechanical-Alloying-Assisted Synthesis of Ti3SiC2 Powder, Journal of American Ceramic Society, vol.1006, pp.2001-2004, 2002. ,
Fabrication of Highly Dense Ti3SiC2 Ceramics by Pressureless Sintering of Mechanically Alloyed Elemental Powders, Journal of Materials Science, vol.38, issue.12, pp.2661-66, 2003. ,
Mechanical Properties of Polycrystalline Ti3SiC2 at Ambient and Elevated Temperatures, Acta. Mater, vol.49, issue.6, pp.11-19, 2001. ,
Synthesis of Ti3SiC2 Polycrystals by Hot-Isostatic Pressing of the Elemental Powders, Journal of Materials Science Letters, vol.18, pp.1595-97, 1999. ,
Single Phase Ti2AlC Powder Synthesized from Ti-Al0.6~0.9TiC-0.1Sn Mixture, Key Engineering Materials, vol.512, pp.28-31, 2012. ,
Influence of Grain Size on High Temperature Oxidation Behavior of Cr2AlC Ceramics, Ceramics International, vol.39, issue.3, pp.2715-2736, 2013. ,
Oxidation Behavior of Ti3SiC2 at High Temperature in Air, Materials Science and Engineering, vol.341, pp.112-132, 2003. ,
Formation of a Single-Phase Ti3AlC2 Références bibliographiques from a Mixture of Ti, Al and TiC Powders with Sn as an Additive, Materials Research Bulletin, vol.43, issue.8-9, pp.2092-99, 2008. ,
Oxidation and Crack Healing Behavior of a Fine-Grained Cr2AlC Ceramic, Journal of the American Ceramic Society, vol.96, issue.3, pp.892-99, 2013. ,
Synthesis and Some Properties of Ti3AlC2 by Hot Pressing of Titanium, Silicon, and Carbon Powders Part 1-Effect of Starting Composition O, Materials Science and Technology, vol.19, issue.10, pp.1442-1488, 2003. ,
Mechanical Properties of Low Temperature Synthesized Dense and Fine-Grained Cr2AlC Ceramics, Journal of the European Ceramic Society, vol.31, issue.1-2, pp.217-241, 2011. ,
Synthesis and Reaction Mechanism of Ti3SiC2 by Mechanical Alloying of Elemental Ti, Si, and C Powders, Journal of the American Ceramic Society, vol.88, issue.8, pp.2092-98, 2005. ,
Synthesis and Microstructure of Ti3AlC2 by Mechanically Activated Sintering of Elemental Powders, Ceramics International, vol.33, issue.2, pp.169-73, 2007. ,
Determination of the Critical Content of Al for Selective Oxidation of Ti3AlC2 at 1100°C, Journal of the European Ceramic Society, vol.36, issue.14, pp.3311-3329, 2016. ,
Breakaway Oxidation of Ti3AlC2 during Long-Term Exposure in Air at 1100°C, Corrosion Science, vol.104, pp.112-134, 2016. ,
Synthesis of Ti2AlC by LaserInduced Self-Propagating High-Temperature Sintering, Journal of Alloys and Compounds, vol.501, issue.1, pp.10-12, 2010. ,
High-Temperature Oxidation and Hot Corrosion of Cr2AlC, Acta Materialia, vol.55, issue.18, pp.6182-91, 2007. ,
Influence of Water Vapor on the Oxidation Behavior of Ti3AlC2 and Ti2AlC, Scripta Materialia, vol.58, pp.29-32, 2008. ,
Interfacial Microstructure of Ti3AlC2 and Al2O3 Oxide Scale, Scripta Materialia, vol.54, issue.10, pp.1815-1835, 2006. ,
New Ceramics Based on Ti3SiC2, Ceramics International, vol.19, issue.4, pp.219-241, 1993. ,
High-Temperature Oxidation Behaviour of Ti3Si(1?x)AlxC2 in Air, Bulletin of Materials Science, vol.32, issue.5, pp.549-54, 2009. ,
Pressureless Sintering and Properties of Ti3AlC2, International Journal of Applied Ceramic Technology, vol.751, pp.744-51, 2010. ,
Stability of Protective Oxide Films on Ti-Base Alloys, Oxidation of Metals, vol.36, issue.5-6, pp.475-90, 1991. ,
MAUD: A Friendly Java Program for Material Analysis Using Diffraction, IUCr: Newsletter of the CPD, vol.21, pp.14-15, 1999. ,
, Titanium Boride in the Temperature Range 300°-1000° C, Powder Metallurgy, vol.2, issue.3, pp.172-76
Binary Alloy Phase Diagrams, ASM International. Metals Park, 1986. ,
Synthesis of High-Purity Ti2AlC by Spark Plasma Sintering (SPS) of the Elemental Powders, Journal of Materials Science, vol.39, issue.4, pp.1471-72, 2004. ,
Determination of Parabolic Rate Constants from a Local Analysis of Mass-Gain Curves, Oxidation of Metals, vol.50, issue.5/6, pp.477-93, 1998. ,
Electric Current Activation of Sintering: A Review of the Pulsed Electric Current Sintering Process, Journal of the American Ceramic Society, vol.94, issue.1, pp.1-19, 2011. ,
, Physics of Creep and Creep-Resistant Alloys, 1995.
, 25th Anniversary Article: MXenes: A New Family of Two-Dimensional Materials, vol.26, pp.992-1005, 2014.
Anisotropic Response of High-Purity ?-Titanium: Experimental Characterization and Constitutive Modeling, International Journal of Plasticity, vol.26, issue.4, pp.516-548, 2010. ,
Statistical Region Merging Code, IEEE Transactions on Pattern Analysis and Machine Intelligence, vol.26, issue.11, pp.1452-58, 2004. ,
Strukturchemie Einiger Verbindungen Der Übergangsmetalle Mit Den Elementen C, Si, Ge, Sn, Progress in Solid State Chemistry, vol.5, pp.90016-90017, 1971. ,
Volatility of Common Protective Oxides in High-Temperature Water Vapor: Current Understanding and Unanswered Questions, Materials Science Forum, 2004. ,
Predicting Oxide Stability in HighTemperature Water Vapor, JOM, vol.58, issue.1, pp.22-28, 2006. ,
Alumina Volatility in Water Vapor at Elevated Temperatures, Journal of the American Ceramic Society, vol.87, issue.9, pp.1701-1706, 2004. ,
Diffraction Study of Thermal Dissociation of Ti3AlC2 in Vacuum, Ceramic Materials, vol.62, issue.3, pp.272-74, 2010. ,
Detection of Amorphous Silica in Air-Oxidized Ti3SiC2 at 500-1000°C by NMR and SIMS, Key Engineering Materials, vol.434, pp.169-72, 2010. ,
Oxidation Characteristics of Ti3AlC2 over the Temperature Range 500-900°C, Materials Chemistry and Physics, vol.117, issue.2-3, pp.384-89, 2009. ,
Synthesis and Pressureless Sintering of Ti3SiC2 Powder, Journal of Materials Research, vol.24, pp.487-92, 2008. ,
Powder Synthesis, Sintering Kinetics, and Nickel-Activated Pressureless Sintering of Ti3AlC2, International Journal of Applied Ceramic Technology, vol.7, issue.6, pp.752-59, 2010. ,
Tension-Compression Yield Asymmetry in asCast Magnesium Alloy, Journal of Alloys and Compounds, vol.617, pp.277-80, 2014. ,
Fabrication of Ti3AlC2 Powder with High-Purity by Pressureless Sintering, Materials Science Forum, 2005. ,
A Novel Simple Method to Stably Synthesize Ti3AlC2 Powder with High Purity, Materials Science and Engineering A, vol.428, issue.1-2, pp.54-58, 2006. ,
On the Formation of Interfacial and Internal Voids in ?-Al203 Scales, Oxidation of Metals, vol.48, pp.24-27, 1997. ,
Cyclic Oxidation of Ti3AlC2 at 1000-1300°C in Air, Corrosion Science, vol.53, issue.1, pp.290-95, 2011. ,
Improving the Cyclic-Oxidation Resistance of Ti3AlC2 at 550°C and 650°C by Preoxidation at 1100°C, International Journal of Applied Ceramic Technology, vol.7, issue.6, pp.760-65, 2010. ,
Isothermal Oxidation Behavior of Ti3Al-Based Alloy at 700-1000 °C in Air, The Nonferrous Metals Society of China, vol.19, pp.60306-60310, 2009. ,
Tensile Properties of Ti3SiC2 in the 25-1300°C Temperature Range, Acta Materialia, vol.48, pp.351-352, 2000. ,
Tensile Creep of Fine Grained (3-5 ?m) Ti3SiC2 in the 1000-1200°C Temperature Range, Acta Materialia, vol.49, pp.4103-4115, 2001. ,
Tensile Creep of CoarseGrained Ti3SiC2 in the 1000-1200°C Temperature Range, Journal of Alloys and Compounds, vol.361, issue.1-2, pp.299-312, 2003. ,
Effect of Temperature , Strain Rate and Grain Size on the Mechanical Response of Ti3SiC2 in Tension, Acta Materialia, vol.50, pp.1297-1306, 2002. ,
TEM Study of the Initial Oxide Scales of Ti2AlC, Acta Materialia, vol.59, issue.13, pp.5216-5239, 2011. ,
Inhibition of Grain Growth during the Final Stage of MultiStage Spark Plasma Sintering of Oxide Ceramics, Scripta Materialia, vol.63, issue.6, pp.585-88, 2010. ,
Innovative Multi-Stage Spark Plasma Sintering to Obtain Strong and Tough Ultrafine-Grained Ceramics, Scripta Materialia, vol.62, issue.7, pp.435-473, 2010. ,
Creep of CMSX-4 Superalloy Single Crystals: Effects of Rafting at High Temperature, Acta Materialia, vol.47, issue.12, pp.3367-81, 1999. ,
Self-Propagating High-Temperature Synthesis of Ti3SiC2: I , Ultra-High-Speed Neutron Diffraction Study of the Reaction Mechanism, J. Am. Ceram. Soc, vol.85, issue.10, pp.2417-2441, 2002. ,
Reaction Synthesis of Ti3SiC2 from Mixture of Elemental Powders, Materials Transations, 2000. ,
Nickel Aluminides: A Step toward Industrial Application, Materials Science and Engineering A, vol.329, pp.596-601, 2002. ,
Creep Deformation and Rupture Behaviour of the Monocrystalline Superalloy CMSX-4: A Comparison with the Alloy SRR 99, Superalloys, 1992. ,
Some Recent Trends in Research and Technology of Advanced Thermal Barrier Coatings, vol.7, pp.3-5, 2003. ,
URL : https://hal.archives-ouvertes.fr/hal-01740659
Transient and Residual Thermal Stresses in Quenched Cylindrical Bodies, International Journal of Mechanical Sciences, vol.42, issue.10, pp.63-69, 2000. ,
In Situ Neutron Diffraction Evidence for Fully Reversible Dislocation Motion in Highly Textured Polycrystalline Ti2AlC Samples, Acta Materialia, vol.98, pp.51-63, 2015. ,
Oxidation of Aluminum in the Temperature Range 400°-600° C, Journal of The Electrochemical Society, vol.103, issue.4, pp.209-223, 1956. ,
Moisture-Induced Delayed Spallation and Interfacial Hydrogen Embrittlement of Alumina Scales, JOM, vol.58, issue.1, pp.29-35, 2006. ,
Moisture-Induced TBC Spallation on Turbine Blade Samples, Surface and Coatings Technology, vol.206, issue.7, pp.1577-85, 2011. ,
Kinetic Aspects of Ti2AlC MAX Phase Oxidation, Oxidation of Metals, vol.83, issue.3-4, pp.351-66, 2015. ,
Oxygen Diffusivity in Alumina Scales Grown on Al-MAX Phases, Corrosion Science, vol.91, pp.281-86, 2015. ,
Oxidation Kinetics of Cast TiAl3, Scripta Metallurgica et Materiala, vol.26, issue.11, pp.1763-68, 1992. ,
Oxidation of High-Temperature Aerospace Materials, High Temperature Materials and Mechanisms, pp.95-162, 2014. ,
OxidationInduced Crack Healing in Ti3AlC2 Ceramics, Scripta Materialia, vol.58, issue.1, pp.13-16, 2008. ,
Early Stages of Oxidation of Ti3AlC2 Ceramics, Materials Chemistry and Physics, vol.112, issue.3, pp.762-68, 2008. ,
High Temperature Oxidation Behaviour of Ti2AlC Ceramic at 1200°C, Materials at High Temperatures, vol.29, issue.3, pp.205-214, 2012. ,
Effect of Non-Metallic Ceramic Inclusions on Strain Localization During Low Cycle Fatigue of a Polycrystalline Superalloy, Superalloys 2016: Proceedings of the 13th International Symposium on Superalloys, pp.897-905, 2016. ,
Progress in Research and Development on MAX Phases: A Family of Layered Ternary Compounds, International Materials Reviews, vol.56, pp.143-66, 2011. ,
Ti3SiC2 Powder Synthesis, Ceramics International, vol.30, issue.7, pp.1873-77, 2004. ,
Effect of Al on the Synthesis of Ti3SiC2 by Reactively Sintering Ti-SiC-C Powder Mixtures, Journal of Alloys and Compounds, vol.439, issue.1-2, pp.321-346, 2007. ,
Synthesis of Ti3SiC2 Powders by a Solid-Liquid Reaction Process, Scripta Materialia, vol.41, issue.1, pp.61-66, 1999. ,
High Temperature Oxidation Behavior of Ti3SiC2-Based Material in Air, Acta Materialia, vol.49, issue.20, pp.247-253, 2001. ,
Cyclic-Oxidation Behavior of Ti3SiC2-Base Material at 1100°C, Oxidation of Metals, vol.57, issue.5/6, pp.379-94, 2002. ,
Effect of Al Addition on Pressureless Reactive Sintering of Ti3SiC2, Scripta Materialia, vol.55, issue.11, pp.1011-1025, 2006. ,
A Critical Review of the Oxidation of Ti2AlC, Ti3AlC2 and Cr2AlC in Air, Materials Research Letters, vol.1, issue.3, pp.115-140, 2013. ,
Tensile Creep of Ti2AlC in Air in the Temperature Range 1000-1150°C, Scripta Materialia, vol.66, issue.10, pp.805-813, 2012. ,
Influence de Films Fonctionnels Sur Les Propriétés Élastiques Des Substrats Associés : Application Au Système Ni/NiO, 2012. ,
Compressive Deformation Behavior of Ternary Compound Cr2AlC, Journal of Materials Science, vol.44, issue.1, pp.102-109, 2009. ,
Synthesis and Characterization of Cr2AlC Ceramics Prepared by Spark Plasma Sintering, Materials Letters, vol.61, issue.22, pp.4442-4487, 2007. ,
Oxidation Behavior of Cr2AlC Ceramics at 1,100 and 1,250°C, Journal of Materials Science, vol.43, issue.8, pp.2785-91, 2008. ,
High Temperature Creep of New L12 Containing CobaltBase Superalloys, Superalloys 2012, pp.823-855, 2012. ,
Simulation of Thermal and Electric Field Evolution during Spark Plasma Sintering, Ceramics International, vol.35, issue.2, pp.699-708, 2009. ,
Mechanism of Spark Plasma Sintering, International Symposium on Functionally Graded Materials, 22, 1994. ,
Reducing the Tension-Compression Yield Asymmetry of Extruded Mg-Zn-Ca Alloy via Equal Channel Angular Pressing, Journal of Magnesium and Alloys, vol.3, issue.4, pp.302-310, 2015. ,
Influence of Grain Size and Heat Treatment on the Microstructure and Mechanical Properties of the NickelBase Superalloy U720 Li, Materials Science and Engineering: A, vol.234, pp.189-92, 1997. ,
Slip Line Analysis around Nanoindentation Imprints in Ti3SnC2: A New Insight into Plasticity of MAX-Phase Materials, Philosophical Magazine, vol.91, issue.7-9, pp.1265-75, 2011. ,
Tension/Compression Asymmetry in Yield and Creep Strengths of Ni-Based Superalloys, Superalloys 2008 (Eleventh International Symposium, 2008. ,
Synthesis and Characterization of Ti3AlC2, Journal of the American Ceramic Society, vol.83, issue.4, pp.825-857, 2000. ,
Metallography, Principles and Practice, Metals Park, 1999. ,
Modelling of the Temperature Distribution during Field Assisted Sintering, Acta Materialia, vol.53, issue.16, pp.4379-88, 2005. ,
Mechanism of the High Temperature Oxidation of Titanium Carbide, High Temperature Materials and Processes, vol.16, issue.4, pp.243-54, 1997. ,
Preparation of High-Strength Ti3AlC2 by Spark Plasma Sintering, International Journal of Applied Ceramic Technology, vol.12, pp.126-157, 2015. ,
Theoretical Studies of Electronic, Mechanical and Thermal Properties of Ti3(SnxAl1-x)C2 Solid Solutions, Acta Physica Sinica, vol.65, p.206201, 1920. ,
Insights into High Temperature Oxidation of Al2O3-Forming Ti3AlC2, Corrosion Science, vol.58, pp.95-103, 2012. ,
Intermediate-Temperature Oxidation Behavior of Ti2AlC in Air, Journal of Materials Research, pp.2974-81, 2002. ,
Microstructure and Properties of Ti3AlC2 Prepared by the SolidLiquid Reaction Synthesis and Simultaneous in-Situ Hot Pressing Process, Acta Materialia, vol.50, pp.3141-3190, 2002. ,
Solid-Liquid Reaction Synthesis of Layered Machinable Ti3AlC2 Références bibliographiques, 2002. ,
, Ceramic, Journal of Materials Chemistry, vol.12, issue.3, pp.455-60
Synthesis and Oxidation of Bulk Ti3AlC2, Key Engineering Materials, 2002. ,
Microstructure and Properties of Ti3AlC2 Prepared by the Solidliquid Reaction Synthesis and Simultaneous in-Situ Hot Pressing Process, Acta Materialia, vol.50, issue.12, pp.3143-51, 2002. ,
High-Temperature Oxidation Behavior of Ti2AlC in Air, Oxidation of Metals, vol.59, issue.3-4, pp.303-323, 2003. ,
Improvement of Intermediate-Temperature Oxidation Resistance of Ti3AlC2 by Pre-Oxidation at High Temperatures, Materials Research Innovations, vol.7, issue.4, pp.205-216, 2003. ,
Oxidation Behavior of TiC-Containing Ti3AlC2 Based Material at 500-900 °C in Air, Materials Research Innovations, vol.7, issue.6, pp.381-90, 2003. ,
Oxidation Behavior of Ti3AlC2 at 1000-1400°C in Air, Corrosion Science, vol.45, issue.5, pp.891-907, 2003. ,
Structure of Amorphous Aluminium Oxide Films, Nature, vol.168, issue.4275, pp.600-601, 1951. ,
Synthesis and Thermal Stability of Cr2AlC, Journal of the European Ceramic Society, vol.31, issue.8, pp.1497-1502, 2011. ,
Study on the Isothermal Oxidation Behavior in Air of Ti3AlC2 Sintered by Hot Pressing, Science in China Series E: Technological Sciences, vol.49, issue.5, pp.513-533, 2006. ,
High-Temperature Oxidation Behavior of Ti3AlC2 in Air, Transactions of Nonferrous Metals Society of China, vol.16, issue.06, p.60318, 2006. ,
Low-Temperature Synthesis of High-Purity Ti3AlC2 by MA-SPS Technique, Journal of the European Ceramic Society, vol.29, issue.1, pp.181-85, 2009. ,
Synthesis of Ti3AlC2 by Spark Plasma Sintering of Mechanically Milled 3Ti/xAl/2C Powder Mixtures, Journal of Alloys and Compounds, vol.472, issue.1-2, pp.79-83, 2009. ,
Fabrication of High-Content Ti3AlC2 Powders by Mechanical Alloying, Key Engineering Materials, 2008. ,
Oxide-Scale Growth on Cr2AlC Ceramic and Its Consequence for Self-Healing, Scripta Materialia, vol.69, issue.2, pp.203-209, 2013. ,
Oxidation of Ti3SiC2 at 1000°C in Air, Oxidation of Metals, vol.59, pp.155-65, 2003. ,
Effect of Al Addition on the Synthesis of Ti3SiC2 Bulk Material by Pulse Discharge Sintering Process, Journal of the European Ceramic Society, vol.27, issue.16, pp.4807-4819, 2007. ,
Formation of Nano-Twinned Structure in Ti3AlC2 Induced by Ion-Irradiation, Acta Materialia, vol.128, pp.1-11, 2017. ,
Effects of Al and Al4C3 Contents on Combustion Synthesis of Cr2AlC from Cr2O3-Al-Al 4C3 Powder Compacts, Journal of Alloys and Compounds, vol.509, issue.3, pp.651-55, 2011. ,
Combustion Synthesis of Ti3AlC2 from Ti/Al/C/TiC Powder Compacts, Journal of Alloys and Compounds, vol.466, issue.1-2, pp.308-321, 2008. ,
Effects of TiC and Al4C3 Addition on Combustion Synthesis of Ti2AlC, Journal of Alloys and Compounds, vol.470, issue.1-2, pp.424-452, 2009. ,
Effects of Using Al4C3 as a Reactant on Formation of Ti3AlC2 by Combustion Synthesis in SHS Mode, Journal of Alloys and Compounds, vol.473, issue.1-2, pp.408-421, 2009. ,
Synthesis and Mechanical Properties of High-Purity Cr2AlC Ceramic, Materials Science and Engineering A, vol.528, issue.6, pp.2635-2675, 2011. ,
Reaction Mechanism for the Synthesis of Ti3AlC2 through an Intermediate Carbide of Ti3AlC from Elemental Ti, Al, and C Powder Mixture, Journal of the Ceramic Society of Japan, vol.118, pp.37-42, 2010. ,
Stacking Faults and Grain Boundaries of Ti3SiC2, Philosophical Magazine Letters, vol.83, issue.5, pp.325-356, 2003. ,
DOI : 10.1080/0950083031000104367
Synthesis, Microstructural Characterization, Mechanical and Transport Properties of Ti2Al(CxNy) Solid Solutions and Their Relative End-Members, 2014. ,
Oxidation Behavior of Bulk Ti3SiC2 at Intermediate Temperatures in Dry Air, Journal of Materials Research, vol.21, issue.2, pp.402-410, 2006. ,
Insights into High-Temperature Uniaxial Compression Deformation Behavior of Ti3AlC2, Journal of the American Ceramic Society, vol.98, issue.10, pp.3332-3369, 2015. ,
First-Principles Study of Ti3AC2 (A = Si, Al) (001) Surfaces, Acta Materialia, vol.55, pp.4645-55, 2007. ,
On the Small Angle Twist SubGrain Boundaries in Ti3AlC2, Scientific Reports, vol.6, issue.1, p.23943, 2016. ,
Fabrication of High Purity Ti3SiC2 from Ti/Si/C with the Aids of Al by Spark Plasma Sintering, Journal of Alloys and Compounds, vol.437, issue.1-2, pp.203-210, 2007. ,
Shear Fracture Behavior of Ti3SiC2 Induced by Compression at Temperatures below 1000°C, Materials Science and Engineering: A, vol.408, issue.1-2, pp.64-71, 2005. ,
Low Temperature Synthesis of Ti3SiC2 from Ti/SiC/C Powders, Materials Science and Technology, vol.20, issue.10, pp.1252-56, 2004. ,
Fabrication and Microstructure Characterization of Ti3SiC2 Synthesized from Ti/Si/2TiC Powders Using the Pulse Discharge Sintering (PDS) Technique, Journal of American Ceramic Society, vol.86, pp.431-467, 2003. ,
Compressive Creep of Fine and Coarse-Grained Ti3SiC2 in Air in the 1100-1300°C Temperature Range, Acta Materialia, vol.53, pp.4963-73, 2005. ,
A Possible Mechanism on Synthesis of Ti3AlC2, Materials Science and Engineering: A, vol.352, issue.1-2, pp.333-372, 2003. ,
DOI : 10.1016/s0921-5093(02)00937-1
Synthesis and Mechanical Properties of Ti3AlC2 by Spark Plasma Sintering, Journal of Materials Science, vol.38, issue.14, pp.3111-3126, 2003. ,
Comparative Study of Oxidation Kinetics for Pure Nickel Oxidized under Tensile and Compressive Stress, Corrosion Science, vol.52, issue.1, pp.210-225, 2010. ,
Fabrication of High-Purity Ternary Carbide Ti3AlC2 by Spark Plasma Sintering (SPS) Technique, Ceramics International, vol.33, issue.7, pp.1399-1402, 2007. ,
DOI : 10.1016/j.ceramint.2006.04.018
Effect of Tin on the Reaction Synthesis of Ternary Carbide Ti3AlC2, Journal Wuhan University of Technology, Materials Science Edition, vol.24, issue.2, pp.283-86, 2009. ,
Synthesis of High-Purity Ti3SiC2 and Ti3AlC2 by Spark Plasma Sintering (SPS) Technique, Journal of Materials Science, vol.40, pp.2099-2100, 2005. ,
DOI : 10.1007/s10853-005-1245-z
Rapid Synthesis of Ti2AlC by Spark Plasma Sintering Technique, Materials Letters, vol.59, issue.1, pp.131-165, 2005. ,
Micro-Scale Plastic Deformation of Polycrystalline Ti3SiC2 under Room-Temperature Compression, Journal of the European Ceramic Society, vol.21, issue.8, pp.1007-1018, 2001. ,
Deformation of Polycrystalline Ti2AlC under Compression, Materials Research Innovations, vol.5, issue.2, pp.87-93, 2001. ,
Cyclic Oxidation of Ternary Layered Ti2AlC at 600-1000°C in Air, International Journal of Applied Ceramic Technology, vol.12, pp.403-413, 2015. ,
Synthesis and Microstructure of LayeredTernary Ti2AlC Ceramic by High Energy Milling and Hot Pressing, Materials Science and Engineering A, vol.490, issue.1-2, pp.62-65, 2008. ,
Effect of Aluminum on the Reaction Synthesis of Ternary Carbide Ti3SiC2, Scripta Materialia, vol.49, issue.7, pp.693-97, 2003. ,
Synthesis of Single-Phase Polycrystalline Ti3SiC2 and Ti3AlC2 by Hot Pressing with the Assistance of Metallic Al or Si, Materials Letters, vol.58, issue.5, pp.567-573, 2004. ,
Steady State Creep Behaviour of TiC Particulate Reinforced Ti-6Al-4V Composite, Materials Science and Engineering: A, vol.256, issue.1-2, pp.301-308, 1998. ,
Synthesis Reactions for Ti3AlC2 through Pulse Discharge Sintering TiH2/Al/C Powder Mixture, Journal of Alloys and Compounds, vol.468, issue.1-2, pp.217-238, 2009. ,
Reaction Mechanism in Ti-SiC-C Powder Mixture during Pulse Discharge Sintering, Ceramics International, vol.36, issue.3, pp.1027-1058, 2010. ,
Synthesis of High-Purity Polycrystalline Ti3AlC2 through Pulse Discharge Sintering Ti/Al/TiC Powders, Journal of Alloys and Compounds, vol.456, issue.12, pp.456-60, 2008. ,
Effect of Al Addition on Low-Temperature Synthesis of Ti3SiC2 Powder, Journal of Alloys and Compounds, vol.461, issue.1-2, pp.579-84, 2008. ,