M. Adelzadeh, H. Hajiloo, and M. F. Green, Numerical Study of FRP Reinforced Concrete Slabs at Elevated Temperature, Polymers, vol.6, pp.408-422, 2014.

A. Ahmed and V. K. Kodur, Effect of bond degradation on fire resistance of FRPstrengthened reinforced concrete beams, Compos. Part B Eng, vol.42, pp.226-237, 2011.

A. Al-abdwais, R. Al-mahaidi, A. , and A. , Performance of NSM CFRP strengthened concrete using modified cement-based adhesive at elevated temperature, Constr. Build. Mater, vol.132, pp.296-302, 2017.

G. Alfano, C. , and M. A. , Finite element interface models for the delamination analysis of laminated composites: mechanical and computational issues, Int. J. Numer. Methods Eng, vol.50, pp.1701-1736, 2001.

M. R. Arruda, J. P. Firmo, J. R. Correia, and C. Tiago, Numerical modelling of the bond between concrete and CFRP laminates at elevated temperatures, Eng. Struct, vol.110, pp.233-243, 2016.

H. Aussel, P. Ferry, and P. Lesné, INRS), 2007.

W. D. Bascom, C. , and R. L. , Effect of Temperature on the Adhesive Fracture Behavior of an Elastomer-Epoxy Resin, J. Adhes, vol.7, pp.333-346, 1976.

Z. P. Bazant and M. F. Kaplan, Concrete at High Temperatures: Material Properties and Mathematical Models, 1996.

L. Bisby, 7-Fire resistance of textile fiber composites used in civil engineering A2Triantafillou, Thanasis, Textile Fibre Composites in Civil Engineering, pp.169-185, 2016.

L. A. Bisby, Fire behaviour of fibre-reinforced polymer (FRP) reinforced or confined concrete, 2003.

L. Bisby, T. Stratford, C. Hart, and S. Farren, Fire Performance of Well-Anchored TRM, FRCM and FRP Flexural Strengthening Systems, Advanced Composites in Construction, 2013.

L. A. Bisby, M. F. Green, and V. K. Kodur, Response to fire of concrete structures that incorporate FRP, Prog. Struct. Eng. Mater, vol.7, pp.136-149, 2005.

H. Blontrock, Analyse en modellering van de brandweerstand van betonelementen uitwendig versterkt met opgelijmde composietlaminaten, 2003.

H. Blontrock, L. Taerwe, and S. Matthys, Properties of Fiber Reinforced Plastics at Elevated Temperatures with Regard to Fire Resistance of Reinforced Concrete Members, p.188, 1999.

G. Camata, F. Pasquini, and E. Spacone, High temperature flexural strengthening with externally bonded FRP reinforcement, Proceedings of 8th International Symposium on Fiber Reinforced Polymer (FRP) Reinforcement for Concrete Structures (FRP8RCS), 2007.

U. S. Camli and B. Binici, Strength of carbon fiber reinforced polymers bonded to concrete and masonry, Constr. Build. Mater, vol.21, pp.1431-1446, 2007.

C. M. Canto, Strength and fracture energy of adhesives for the automotive industry, 2013.

S. Cao, X. Wang, and Z. Wu, Evaluation and prediction of temperature-dependent tensile strength of unidirectional carbon fiber-reinforced polymer composites, J. Reinf. Plast. Compos, vol.30, pp.799-807, 2011.

J. Chen, Y. , and B. , Stress-strain curves for stainless steel at elevated temperatures, Eng. Struct, vol.28, pp.229-239, 2006.

J. F. Chen and J. G. Teng, Proceedings of International Symposium on Bond Behaviour of FRP in Structures (BBFS 2005) (International Institute for FRP in Construction), 2005.

E. Chowdhury, L. Bisby, M. Green, N. Bénichou, and V. Kodur, Heat transfer and structural response modelling of FRP confined rectangular concrete columns in fire, Constr. Build. Mater, vol.32, pp.77-89, 2012.

E. U. Chowdhury, L. A. Bisby, M. F. Green, and V. K. Kodur, Investigation of insulated FRP-wrapped reinforced concrete columns in fire. Fire Saf, J, vol.42, pp.452-460, 2007.

R. Contamine, A. Si-larbi, and P. Hamelin, Contribution to direct tensile testing of textile reinforced concrete (TRC) composites, Mater. Sci. Eng. A, vol.528, pp.8589-8598, 2011.

J. R. Correia, F. A. Branco, J. G. Ferreira, Y. Bai, and T. Keller, Fire protection systems for building floors made of pultruded GFRP profiles: Part 1: Experimental investigations, Compos. Part B Eng, vol.41, pp.617-629, 2010.

D. Cree, E. U. Chowdhury, M. F. Green, L. A. Bisby, and N. Bénichou, Performance in fire of FRP-strengthened and insulated reinforced concrete columns. Fire Saf, J, vol.54, pp.86-95, 2012.

D. Cree, T. Gamaniouk, M. L. Loong, and M. F. Green, Tensile and Lap-Splice Shear Strength Properties of CFRP Composites at High Temperatures, J. Compos. Constr, vol.19, p.4014043, 2015.

I. J. Denoël and .. , Sécurité incendie et constructions en béton, p.90, 2007.

D. Tommaso, A. Neubauer, U. Pantuso, A. Rostasy, and F. S. , Behavior of adhesively bonded concrete-CFRP joints at low and high temperatures, Mech. Compos. Mater, vol.37, pp.327-338, 2001.

K. Dong and K. Hu, Development of bond strength model for CFRP-to-concrete joints at high temperatures, Compos. Part B Eng, vol.95, pp.264-271, 2016.

D. Cree, P. Pliya, M. F. Green, and A. Noumowé, Thermal behaviour of unstressed and stressed high strength concrete containing polypropylene fibers at elevated temperature, J. Struct. Fire Eng, vol.8, pp.402-417, 2017.

, EN 1992-1-2 EN 1992-1-2: Eurocode 2: Design of concrete structures-Part 1-2: General rulesStructural fire design

I. E. Evseeva and S. A. Tanaeva, Thermophysical properties of epoxy composite materials at low temperatures, Cryogenics, vol.35, pp.277-279, 1995.

H. Fares, Propriétés mécaniques et physico-chimiques de Bétons autoplaçants exposés à une température élevée, 2010.

S. Feih and A. P. Mouritz, Tensile properties of carbon fibres and carbon fibre-polymer composites in fire, Compos. Part Appl. Sci. Manuf, vol.43, pp.765-772, 2012.

S. Feih, E. Boiocchi, E. Kandare, Z. Mathys, A. G. Gibson et al., Strength degradation of glass and carbon fibres at high temperature, ICCM-17 17th International Conference on Composite Materials. Proceedings, 2009.

E. Ferrier, M. Quiertant, K. Benzarti, and P. Hamelin, Influence of the properties of externally bonded CFRP on the shear behavior of concrete/composite adhesive joints, Compos. Part B Eng, vol.41, pp.354-362, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00587872

E. Ferrier, L. Michel, and A. S. Larbi, Comportement mécanique en cisaillement des interfaces composite/béton aux faibles (-40 C) et hautes températures (+ 80 C), 2012.

J. P. Firmo and J. R. Correia, Fire behaviour of thermally insulated RC beams strengthened with EBR-CFRP strips: Experimental study, Compos. Struct, vol.122, pp.144-154, 2015.

J. P. Firmo, J. R. Correia, and P. França, Fire behaviour of reinforced concrete beams strengthened with CFRP laminates: Protection systems with insulation of the anchorage zones, Compos. Part B Eng, vol.43, pp.1545-1556, 2012.

J. P. Firmo, M. R. Arruda, and J. R. Correia, Contribution to the understanding of the mechanical behaviour of CFRP-strengthened RC beams subjected to fire: Experimental and numerical assessment, Compos. Part B Eng, vol.66, pp.15-24, 2014.

J. P. Firmo, J. R. Correia, D. Pitta, C. Tiago, and M. R. Arruda, Experimental characterization of the bond between externally bonded reinforcement (EBR) CFRP strips and concrete at elevated temperatures, Cem. Concr. Compos, vol.60, pp.44-54, 2015.

J. P. Firmo, J. R. Correia, and L. A. Bisby, Fire behaviour of FRP-strengthened reinforced concrete structural elements: A state-of-the-art review, Compos. Part B Eng, vol.80, pp.198-216, 2015.

J. P. Firmo, J. R. Correia, D. Pitta, C. Tiago, and M. R. Arruda, Bond Behavior between Near-Surface-Mounted CFRP Strips and Concrete at High Temperatures, J. Compos. Constr, vol.19, p.4014071, 2015.

S. K. Foster and L. A. Bisby, High temperature residual properties of externally bonded FRP systems, Proceedings of the 7th International Symposium on Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures (FRPRCS-7), pp.1235-52, 2005.

S. K. Foster and L. A. Bisby, Fire survivability of externally bonded FRP strengthening systems, J. Compos. Constr, vol.12, pp.553-561, 2008.

J. Gales, T. Parker, D. Cree, and M. Green, Fire Performance of Sustainable Recycled Concrete Aggregates: Mechanical Properties at Elevated Temperatures and Current Research Needs, Fire Technol, vol.52, pp.817-845, 2016.

J. C. Gamage, R. Al-mahaidi, and M. B. Wong, Bond characteristics of CFRP plated concrete members under elevated temperatures, Compos. Struct, vol.75, pp.199-205, 2006.

B. Ghadimi, S. Russo, R. , and M. , Predicted mechanical performance of pultruded FRP material under severe temperature duress, Compos. Struct, vol.176, pp.673-683, 2017.

A. G. Gibson, Laminate Theory Analysis of Composites under Load in Fire, J. Compos. Mater, vol.40, p.207, 2005.

M. F. Green, N. Bénichou, V. K. Kodur, and L. A. Bisby, Design guidelines for fire resistance of FRP-strengthened concrete structures, Eighth International Conference on FRP in Reinforced Concrete Structures (FRPRCS-8), pp.16-18, 2007.

I. Hager, Comportement à haute température des bétons à haute performance: évolution des principales propriétés mécaniques, 2004.

R. J. Hamad, M. A. Megat-johari, and R. H. Haddad, Mechanical properties and bond characteristics of different fiber reinforced polymer rebars at elevated temperatures, Constr. Build. Mater, vol.142, pp.521-535, 2017.

T. Z. Harmathy, A new look at compartment fires, part I, Fire Technol, vol.8, pp.196-217, 1972.

T. Z. Harmathy, A new look at compartment fires, part II, Fire Technol, vol.8, pp.326-351, 1972.

R. A. Hawileh, M. Naser, W. Zaidan, R. , and H. A. , Modeling of insulated CFRPstrengthened reinforced concrete T-beam exposed to fire, Eng. Struct, vol.31, pp.3072-3079, 2009.

. Hitachi, Specific Heat Capacity Measurements Using DSC I (Japan), 1981.

S. Horst, High performance adhesive bonding of VICTREX® PEEKTM at elevated temperatures, 2000.

A. Hosseini, M. , and D. , Effective bond length of FRP-to-concrete adhesivelybonded joints: Experimental evaluation of existing models, Int. J. Adhes. Adhes, vol.48, pp.150-158, 2014.

S. I. Hussan, Thermal conductivity and electrical conductivity of Epoxy Composites filled with Carbon Nanotube and Chopped Carbon Fibers, vol.23, p.10, 2012.

. Iso-834, ISO 834: Fire-resistance tests-Elements of building construction-Part 1: General requirements, 1999.

A. Jadooe, R. Al-mahaidi, A. , and K. , Experimental and numerical study of strengthening of heat-damaged RC beams using NSM CFRP strips, Constr. Build. Mater, vol.154, pp.899-913, 2017.

A. Jadooe, R. Al-mahaidi, A. , and K. , Modelling of NSM CFRP strips embedded in concrete after exposure to elevated temperature using epoxy adhesives, Constr. Build. Mater, vol.148, pp.155-166, 2017.

J. Awad, A. Riadh, and A. Kamiran, Bond Behavior between NSM CFRP Strips and Concrete Exposed to Elevated Temperature Using Cement-Based and Epoxy Adhesives, J. Compos. Constr, vol.21, p.4017033, 2017.

G. Ji, G. Li, A. , and W. , A new fire resistant FRP for externally bonded concrete repair, Constr. Build. Mater, vol.42, pp.87-96, 2013.

Y. J. Kim, A. Hmidan, and K. Choi, Residual Behavior of Shear-Repaired Concrete Beams Using CFRP Sheets Subjected to Elevated High Temperatures, J. Compos. Constr, vol.16, pp.253-264, 2012.

E. L. Klamer, D. A. Hordijk, and H. J. Janssen, The influence of temperature on the debonding of externally bonded, CFRP. Spec. Issue ACI, vol.230, pp.1551-70, 2005.

E. L. Klamer, D. A. Hordijk, and C. S. Kleinman, Debonding of CFRP laminates externally bonded to concrete specimens at low and high temperatures, Proceedings of Third International References, p.208, 2006.

, Conference on Composites in Civil Engineering, pp.35-38, 2006.

E. L. Klamer, D. A. Hordijk, and M. C. Hermes, The influence of temperature on RC beams strengthened with externally bonded CFRP reinforcement, Heron, vol.53, pp.157-185, 2008.

V. Kodur, Properties of Concrete at Elevated Temperatures, ISRN Civ. Eng, pp.1-15, 2014.

V. K. Kodur, L. A. Bisby, and M. F. Green, Experimental evaluation of the fire behaviour of insulated fibre-reinforced-polymer-strengthened reinforced concrete columns. Fire Saf, J, vol.41, pp.547-557, 2006.

R. Kotynia, Bond between FRP and concrete in reinforced concrete beams strengthened with near surface mounted and externally bonded reinforcement, Constr. Build. Mater, vol.32, pp.41-54, 2012.

R. Kotynia, H. Baky, K. W. Neale, and U. A. Ebead, Flexural strengthening of RC beams with externally bonded CFRP systems: test results and 3D nonlinear FE analysis, J. Compos. Constr, vol.12, pp.190-201, 2008.

M. Leone, S. Matthys, and M. A. Aiello, Effect of elevated service temperature on bond between FRP EBR systems and concrete, Compos. Part B Eng, vol.40, pp.85-93, 2009.

C. López, J. P. Firmo, J. R. Correia, and C. Tiago, Fire protection systems for reinforced concrete slabs strengthened with CFRP laminates, Constr. Build. Mater, vol.47, pp.324-333, 2013.

C. Maluk, L. Bisby, and G. Terrasi, Bond strength degradation for pre-stressed steel and carbon FRP bars in high-performance self-consolidating concrete at elevated temperatures and in fire, 6th International Conference on Structures in Fire, p.p, 2010.

C. Maluk, G. P. Terrasi, L. Bisby, A. Stutz, and E. Hugi, Fire resistance tests on thin CFRP prestressed concrete slabs, Constr. Build. Mater, vol.101, pp.558-571, 2015.

C. Mazzotti, M. Savoia, and B. Ferracuti, An experimental study on delamination of FRP plates bonded to concrete, Constr. Build. Mater, vol.22, pp.1409-1421, 2008.

A. Menou, Etude du comportement thermomécanique des bétons à haute température: Approche multi-échelles de l'endommagement thermique, 2004.

J. Mindeguia, Contribution expérimentale à la compréhension des risques d'instabilité thermique des bétons, 2009.

L. Missemer, Etude du comportement sous très hautes températures des bétons fibrés à ultra performances: application au BCV, p.239, 2012.

A. P. Mouritz and A. G. Gibson, Fire Properties of Polymer Composite Materials, 2006.

A. P. Mouritz, Z. Mathys, and A. G. Gibson, Heat release of polymer composites in fire, Compos. Part Appl. Sci. Manuf, vol.37, pp.1040-1054, 2006.

O. Moussa, A. P. Vassilopoulos, and T. Keller, Experimental DSC-based method to determine glass transition temperature during curing of structural adhesives, Constr. Build. Mater, vol.28, pp.263-268, 2012.

O. Moussa, A. P. Vassilopoulos, J. De-castro, and T. Keller, Time-temperature dependence of thermomechanical recovery of cold-curing structural adhesives, Int. J. Adhes. Adhes, vol.35, pp.94-101, 2012.

A. R. Namrou, K. , and Y. J. , Residual performance of concrete-adhesive interface at elevated temperatures, Constr. Build. Mater, vol.105, pp.113-122, 2016.

M. Naser, G. Abu-lebdeh, and R. Hawileh, Analysis of RC T-beams strengthened with CFRP plates under fire loading using ANN, Constr. Build. Mater, vol.37, pp.301-309, 2012.

V. T. Nguyen, Comportement des bétons ordinaire et à hautes performances soumis à haute température: application à des éprouvettes de grandes dimensions, p.183, 2013.

P. L. Nguyen, X. H. Vu, and E. Ferrier, Characterization of pultruded carbon fibre reinforced polymer (P-CFRP) under two elevated temperature-mechanical load cases: Residual and thermomechanical regimes, Constr. Build. Mater, vol.165, pp.395-412, 2018.

T. H. Nguyen, X. H. Vu, A. Si-larbi, and E. Ferrier, Experimental study of the effect of simultaneous mechanical and high-temperature loadings on the behaviour of textile-reinforced concrete (TRC), Constr. Build. Mater, vol.125, pp.253-270, 2016.

Y. T. Obaidat, Structural retrofitting of concrete beams using FRP: debonding issues. Department of Construction Sciences, Structural Mechanics, 2011.

G. M. Odegard and A. Bandyopadhyay, Physical aging of epoxy polymers and their composites, J. Polym. Sci. Part B Polym. Phys, vol.49, pp.1695-1716, 2011.

C. Oudet, Polymères: structure et proprietés, introduction (Masson), 1994.

A. Palmieri, S. Matthys, T. , and L. , Fire Endurance and Residual Strength of Insulated Concrete Beams Strengthened with Near-Surface Mounted Reinforcement, J. Compos. Constr, vol.17, pp.454-462, 2013.

J. P. Pascault, H. Sautereau, J. Verdu, W. , and R. J. , Thermosetting polymers, 2002.
URL : https://hal.archives-ouvertes.fr/hal-00870591

S. Perkins, A Study of the Mechanical Behavior of Epoxy Systems under Different Testing Temperatures, 2011.

P. Long, N. , X. Hong, V. , E. et al., An Experimental Study On The Thermomechanical And Residual Behaviour Of The P-CFRP Subjected To High Temperature Loading, Proceedings of the Eighth International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering, pp.797-803, 2016.

W. Qingfeng and S. Wenfang, Kinetics study of thermal decomposition of epoxy resins containing flame retardant components.pdf, Polym. Degrad. Stab, vol.91, pp.1747-1754, 2006.

D. V. Reddy, K. Sobhan, Y. , and J. , Effect of fire on structural elements retrofitted by carbon fiber reinforced polymer composites. 31st Our World Concr, pp.16-17, 2006.

A. Revathi, S. Rao, K. V. Rao, M. Prakash, M. Sendil-murugan et al., Influence of temperature on tensile behavior of multiwalled carbon nanotube modified epoxy nanocomposites, J. Mater. Res, vol.29, pp.1635-1641, 2014.

Z. Rubab, A. Afzal, H. M. Siddiqi, and S. Saeed, Preparation, Characterization, and Enhanced Thermal and Mechanical Properties of Epoxy-Titania Composites, Sci. World J, vol.2014, pp.1-7, 2014.

S. Russo, B. Ghadimi, K. Lawania, R. , and M. , Residual strength testing in pultruded FRP material under a variety of temperature cycles and values, Compos. Struct, vol.133, pp.458-475, 2015.

M. Saafi, Effect of fire on FRP reinforced concrete members, ResearchGate, vol.58, pp.11-20, 2002.

S. Cao, W. U. Zhis, and X. Wang, Tensile Properties of CFRP and Hybrid FRP Composites at Elevated Temperatures, J. Compos. Mater, vol.43, pp.315-330, 2009.

J. W. Sinclair, Effects of Cure Temperature on Epoxy Resin Properties, J. Adhes, vol.38, pp.219-234, 1992.

J. P. Souza and J. M. Reis, Thermal behavior of DGEBA (Diglycidyl Ether of Bisphenol A) adhesives and its influence on the strength of joints, Appl. Adhes. Sci, vol.1, p.6, 2013.

A. J. Tadeu and F. J. Branco, Shear tests of steel plates epoxy-bonded to concrete under temperature, J. Mater. Civ. Eng, vol.12, pp.74-80, 2000.

K. H. Tan and Y. Q. Zhou, Fiber-Reinforced Cement Composites under Elevated Temperatures, Proceedings of the 5th International RILEM Workshop, pp.371-377, 2007.

K. H. Tan and Y. Q. Zhou, Basalt FRP Laminates Subjected to Elevated Temperatures, pp.137-143, 2008.

K. H. Tan and Y. Q. Zhou, Basalt FRP-Strengthened Beams Subjected to Elevated Temperatures, p.75, 2009.

M. R. Tant, H. L. Mcmanus, R. , and M. E. , High-Temperature Properties and Applications of Polymeric Materials: An Overview, High-Temperature Properties and Applications of Polymeric Materials, pp.1-20, 1995.

G. P. Terrasi, L. Bisby, M. Barbezat, C. Affolter, and E. Hugi, Fire Behavior of Thin CFRP Pretensioned High-Strength Concrete Slabs, J. Compos. Constr, vol.16, pp.381-394, 2012.

P. Tranchard, F. Samyn, S. Duquesne, M. Thomas, B. Estèbe et al., Fire behaviour of carbon fibre epoxy composite for aircraft: Novel test bench and experimental study, J. Fire Sci, vol.33, pp.247-266, 2015.

I. A. Tsekmes, R. Kochetov, P. H. Morshuis, and J. J. Smit, Thermal conductivity of polymeric composites: A review, pp.678-681, 2013.

M. K. Tshimanga, Influence des paramètres de formulation sur le comportement à haute température des bétons, 2007.

P. Turkowski, M. Ukomski, P. Sulik, R. , and P. , Fire Resistance of CFRPstrengthened Reinforced Concrete Beams under Various Load Levels, Procedia Eng, vol.172, pp.1176-1183, 2017.

V. Urso-miano, Modelling composite fire behaviour using apparent thermal diffusivity, 2011.

K. Wang, B. Young, and S. T. Smith, Mechanical properties of pultruded carbon fibrereinforced polymer (CFRP) plates at elevated temperatures, Eng. Struct, vol.33, pp.2154-2161, 2011.

Y. C. Wang, P. M. Wong, and V. Kodur, An experimental study of the mechanical properties of fibre reinforced polymer (FRP) and steel reinforcing bars at elevated temperatures, Compos. Struct, vol.80, pp.131-140, 2007.

J. Yail, A. H. Kim, . Kyoung-kyu, S. Choi, and . Yazdani, Fracture Characteristics of Notched Concrete Beams Shear-strengthened with CFRP Sheets Subjected to High Temperature, p.286, 2012.

Y. Yin, J. G. Binner, T. E. Cross, M. , and S. J. , The oxidation behaviour of carbon fibres, J. Mater. Sci, vol.29, pp.2250-2254, 1994.

B. Yu and V. Kodur, Effect of temperature on strength and stiffness properties of nearsurface mounted FRP reinforcement, Compos. Part B Eng, vol.58, pp.510-517, 2014.

Z. Yuqian, Externally bonded FRP reinforcement for RC structures: technical report on the design and use of externally bonded fibre reinforced polymer reinforcement (FRP EBR) for reinforced concrete structures, fib), 2001.

, Eurocode 2: Design of concrete structures

, Eurocode 3: Design of steel structures