D. M. Pozar, Microwave Engineering, 2003.

R. Stancliff and J. Dunsmore, The Evolution of RF/Microwave Network Analyzers

, Agilent Measurement Journal

P. Hindle, The State of RF and Microwave Switches, Microwave Journal, vol.53, issue.11, p.20, 2010.

A. E. Parker, J. G. Rathmell, and J. B. Scott, The RF and Microwave Handbook, 2000.

A. Stephen and . Maas, The RF Microwave Circuit Design Cookbook, 1998.

, Specifying calibration standards for the Agilent network analyzer', Agilent Product Note 8510-5B, 2006.

, U3022AE10 Multiport test set, 2007.

H. Packard, Specifying Calibration Standards for the HP 8510 Network

. Analyzer, Product Note 8510-5a, 1988.

, Applying Error Correction to Network Analyzer Measurements, Application Note, Agilent AN, pp.1287-1290

R. B. Marks, A multiline method of network analyzer calibration, IEEE Transactions on Microwave Theory and Technique, vol.39, pp.1205-1215, 1991.

A. Rumiantsev and N. Ridler, VNA calibration, IEEE Microwave Magazine, vol.9, issue.3, pp.86-99, 2008.

D. Rytting, Advances in microwave error correction techniques, Hewlett-Packard RF & Microwave Measurement Symposium and Exhibition, p.27, 1987.

D. Rytting, IEEE MTT/ED seminar on Calibration and Error Correction Techniques for Network Analysis, OGl Center for Professional Development, 2004.

J. R. Juroshek and D. X. Legolvan, Correcting for Systematic Errors in One-Port Calibration Standards, 2003.

C. Chen, C. , and T. , Analytical characterization of S-matrix reconstruction transforms on multiport networks, Proc. of 2011 Asia-Pacific Microwave Conference, pp.1362-1365, 2011.

L. A. Hayden and V. K. Tripathi, Calibration methods for time domain network analysis, IEEE Trans. Microwave Theory and Tech, issue.3, p.415420, 1993.

J. A. Lonac, I. Melczarsky, and R. P. Paganelli, On-wafer multiport linear characterization of passive structures using a standard two-port VNA, pp.252-255, 2010.

N. R. Franzen and R. A. Speciale, A new procedure for system calibration and error removal in automated S-parameter measurements, Conf. Proc. 5th European Microwave Conf, pp.67-73, 1975.

S. Padmanabhan and ;. P. Kirby,

J. Daniel and ;. Dunleavy, Accurate broadband on-wafer SOLT calibrations with complex load and thru models, IEEE International ARFTG Conference Digest, 2003.

M. Imparato, T. Weller, and L. Dunleavy, On-wafer calibration using space-conservative (SOLT) standards"MTT-S Inf '1 Microwave Symposium, 1999.

U. Stumper, Uncertainties of VNA S-parameter measurements applying the short-openload-reciprocal (SOLR) calibration method, CPEM Conf. Dig, pp.438-439, 2008.

H. Eul and B. Schiek, Experimental Results of New Self-Calibration Procedures for Network Analyzers, 20 th IEEE European Microwave Conference, 1990.

L. F. Tiemeijer, R. J. Havens, A. B. Jansman, and Y. Bouttement, Comparison of the 'pad-open-short' and 'open-short-load' deembedding techniques for accurate on-wafer RF characterization of highquality passives, ARFTG) Conference Digest, vol.53, pp.45-52, 1999.

A. Davidson, E. Strid, and K. Jones, Achieving greater on-wafer S-parameter accuracy with the LRM calibration technique, 1989.

A. Davidson, E. Strid, and K. Jones, LRM and LRRM calibrations with automatic determination of lead inductance, 1990.

J. A. Jargon and R. B. Marks, Two-Tier Multiline TRL for Calibration of Low-Cost Network Analyzers, pp.1-8, 1995.

A. Ferrero and U. Pisani, Two-port network analyzer calibration using an unknown 'thru, IEEE Microwave and Guided Wave Letters, vol.2, issue.12, pp.505-507, 1992.

C. Shih, Advanced TRL (through-reflect-line) fixture design and error analysis for RF high power transistor characterization and automatic load pull measurement, 51st ARFTG Symposium, pp.72-76, 1998.

H. Eul and B. Schiek, Thru-match-reflect: One result of a rigorous theory for deembedding and network analyzer calibration, Proc. 18th European Microwave Conf, pp.909-914, 1988.

G. F. Engen and C. A. Hoer, Thru-reflect-line: An improved technique for calibrating the dual six-port automatic network analyzer, IEEE Trans. Microwave Theory Tech, vol.27, pp.987-993, 1979.

H. Eul and B. Schiek, A generalized theory and new calibration procedures for network analyzer self-calibration, IEEE Trans. Microwave Theory Tech, vol.39, pp.724-731, 1991.

K. Kuhlmann, A study of the reference impedance influence on a TRL calibration, Microwave Measurement Conference (ARFTG), 2016 87th ARFTG, pp.27-27, 2016.

R. B. Marks, A Multiline Method of Network Analyzer Calibration, IEEE Trans

, Microwave Theory & Tech, vol.39, issue.7, pp.1205-1215, 1991.

J. R. Monjardín-lopez, A. Garcia-osorio, D. Orozconavarro, J. R. Loo-yau, and M. C. ,

. Maya-sanchez, Using lines of arbitrary impedance as standards on the TRL calibration technique, 81st ARFTG Microwave Measurement Conference, pp.1-4, 2013.

D. C. Degroot, J. A. Jargon, and R. B. Marks, Multiline TRL revealed, Proc. 60rd

A. , , pp.131-155, 2002.

, Keysight Electronic Calibration Modules, 2015.

, Agilent AN 1287-3 Applying Error Correction to Network Analyzer Measurements, pp.1-16, 1287.

J. Stenarson and K. Yhland, A reformulation of TRL and LRM for Sparameters, Proc. 73rd ARFTG, p.7780, 2009.

, Specifying Calibration Standards and Kits for Agilent Vector Network Analyzers, Appl. Note 1287-11, pp.1-42, 2011.

Y. Kim and C. Lee, An improved error correction method of TRL removing manufacturing inaccuracy, Proc. IEEE Antennas Propagation Soc. Int. Symp, pp.3625-3628, 2004.

, Agilent Specifying Calibration Standards for the Agilent 8510 Network Analyzer, Appl. Note 8510-5B, pp.1-32, 2006.

J. Zhang, M. Koledintseva, J. Drewniak, G. Antonini, A. Orlandi et al., Extracting R, L, G, C Parameters of Dispersive Planar Transmission Lines from Measured SParameters using a Genetic Algorithm, Proc. of the 2004 IEEE International Symposium on Electromagnetic Compatibility, pp.572-576, 2004.

A. Visweswaran and W. A. Serdijn, A low power UWB-LNA using active dual loop negative feedback in CMOS 0.13?m, Proceedings of IEEE International Symposium on Circuits and Systems, pp.225-228, 2009.

T. T. Tran, C. C. Boon, M. A. Do, and K. S. Yeo, A 2.4 GHz ultra low-power high gain LNA utilizing ?-match and capacitive feedback input network, Proceedings of IEEE 54th
URL : https://hal.archives-ouvertes.fr/hal-01397612

, International Midwest Symposium on Circuits and Systems (MWSCAS), pp.1-4, 2011.

M. Wojnowski, M. Engl, V. Issakov, G. Sommer, and R. Weigel, Accurate broadband RLCGparameter extraction with TRL calibration, IEEE MTT-S International Microwave Symposium Digest, pp.41-46, 2008.

S. Mason, Power Gain in Feedback Amplifier, Transactions of the IRE Professional Group on Circuit Theory, vol.1, pp.20-25, 1954.

H. Fukui, Available Power Gain, Noise Figure, and Noise Measure of Two-Ports and Their Graphical Representations, IEEE Transactions on Circuit Theory, issue.13, 1966.

M. Wojnowski, M. Issakov, V. Sommer, G. Weigel, and R. , Multimode TRL Calibration Technique for Characterization of Differential Devices, IEEE Transactions on, vol.60, issue.7, p.2247, 2012.

J. Martens, D. V. Judge, and J. A. Bigelow, Uncertainties associated with many-port. Sparameter measurements using a four-port vector network analyzer, IEEE Transactions on, vol.52, issue.5, p.1368, 2004.

W. Lin;-chengli-ruan, Measurement and calibration of a universal six-port network analyzer, IEEE Transactions, vol.37, issue.4, p.742, 1989.

V. Issakov, M. Wojnowski, A. Thiede, and R. Weigel, Considerations on the de-embedding of differential devices using two-port techniques, European Microwave Conference (EuMC), pp.695-698, 2009.

H. , C. A. Engen, and G. F. , Calibrating a Dual Six-Port or Four-Port for Measuring TwoPorts with Any Connectors, IEEE MTT-S, Symposium Digest, pp.665-668, 1986.

I. Rolfes and B. Schiek, Multiport method for the measurement of the scattering parameters of n-ports, IEEE transactions on Microwave Theory and techniques, vol.53, pp.1990-1996, 2008.

K. Jung, O. R. Beaverton, R. Campbell, L. Hayden, and W. Eisenstadt, Evaluation of
URL : https://hal.archives-ouvertes.fr/hal-01125200

, Measurement Uncertainties Caused by Common and Cross Modes in Differential Measurements Using Baluns, IEEE Transactions on Microwave Theory and Techniques, vol.56, issue.6, pp.1485-1492, 2008.

K. J. Silvonen, A general approach to network analyzer calibration, IEEE Trans
DOI : 10.1109/22.127526

, Microwave Theory Technique, vol.40, pp.754-759, 1992.

A. Ferrero, U. Pisani, and K. J. Kerwin, A new implementation of a multiport automatic network analyzer, IEEE Trans. Microwave Theory Technique, vol.40, pp.2078-2085, 1992.

K. Hamze, ;. Pasquet, ;. Descamps, and ;. E. De-ledinghen, Extraction of Device SParameters within Board by using a TRL De-Embedding Technique, Microwave and Optical Technology Letters (MOTL), 2018.

K. Hamze, ;. Pasquet, ;. Descamps, and ;. E. De-ledinghen, Analytical calculations for TRL Calibration Method, Microwave Journal (MWJ), HORIZON HOUSE PUBLICATIONS, vol.8348, 2018.

K. Hamze, ;. Pasquet, ;. Descamps, and ;. E. De-ledinghen, Applied TRL Calibration Method to Differential Devices Embedded in a Test Board, pp.20-23, 2019.

K. Hamze;-p.-descamps, ;. Pasquet, ;. C. Mayor, and ;. Gautier, Evaluation of Substrate's Characteristics from the Relation between Wave and Characteristic Impedances for a CPW, Microwave and Radar Week (MRW), 8 th International MRW Conference, pp.14-17, 2018.

K. Hamze;-p.-descamps, ;. Pasquet, and ;. E. De-ledinghen, Evaluation of the Error due to Bended CPW Lines used in a Calibration Process, Mediterranean Microwave Symposium, 17 th International MMS Conference, pp.28-30, 2017.

K. Hamze, ;. Pasquet, ;. Descamps, and ;. E. De-ledinghen, Theoretical Comparison Between Calibration Standards using Straight and Bended CPWs, International Conference on Advanced Technologies, Systems and Services in Telecommunications, 13 th International Telsiks Conference, 2017.
DOI : 10.1109/telsks.2017.8246251

K. Hamze;-p.-descamps, ;. Pasquet, and ;. E. De-ledinghen, Parasitic Effects of Coplanar and Slot modes in Waveguides, Circuits et systèmes intégrés RF/millimétriques du GDR Ondes, 2017.