F. and A. , 17.0 udf manual, p.43, 2016.

, Gyratory combustion chamber from SHE awarded by safran group, p.17

, Integrated hybrid rans/les of a realistic gas turbine engine

, Cité page 5

A. T. Piacentini, T. Morel, and F. Duchaine, Open-palm: an open source dynamic parallel coupler, IV International Conference on Computational Methods for Coupled Problems in Science and Engineering, p.91, 2011.

P. Aillaud, F. Duchaine, L. Gicquel, and S. Didorally, Secondary peak in the nusselt number distribution of impinging jet flows: A phenomenological analysis, Physics of Fluids, vol.28, issue.9, p.7, 2016.

P. Aillaud, F. Duchaine, L. Gicquel, and S. Didorally, Characterization of the surface curvature effect using les for a single round impinging jet, Proceedings of ASME Turbo Expo 2017: Turbine Technical Conference and Exposition, p.7, 2017.

J. Amaya, E. Collado, B. Cuenot, and T. Poinsot, Coupling les, radiation and structure in gas turbine simulations, Proc. of the Summer Program, p.91, 2010.

H. D. Ammari, N. Hay, and D. Lampard, The effect of density ratio on the heat transfer coefficient from a film-cooled flat plate, J. Turbomach, vol.112, p.18, 1990.

L. Andrei, A. Andreini, C. Bianchini, G. Caciolli, B. Facchini et al., Effusion cooling plates for combustor liners: exBibliography perimental and numerical investigations on the effect of density ratio, Energy Procedia, vol.45, p.139, 2014.

L. Andrei, A. Andreini, C. Bianchini, B. Facchini, and L. Mazzei, Numerical analysis of effusion plates for combustor liners cooling with varying density ratio, ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, pp.20-139, 2013.

L. Andrei, L. Innocenti, A. Andreini, B. Facchini, and L. Winchler, Film cooling modeling for gas turbine nozzles and blades: Validation and application, Journal of Turbomachinery, vol.139, issue.1, pp.32-33, 2017.

A. Andreini, R. Becchi, B. Facchini, A. Picchi, and A. Peschiulli, The effect of effusion holes inclination angle on the adiabatic film cooling effectiveness in a three-sector gas turbine combustor rig with a realistic swirling flow, International Journal of Thermal Sciences, vol.121, p.20, 2017.

A. Andreini, G. Caciolli, B. Facchini, L. Tarchi, D. Coutandin et al., Density ratio effects on the cooling performances of a combustor liner cooled by a combined slot/effusion system, ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, p.20, 2012.

A. Andreini, J. L. Champion, B. Facchini, E. Mercier, and M. Surace, Advanced liner cooling numerical analysis for low emission combustors, 25TH International Congress Of The Aeronautical Sciences, vol.2, pp.20-41, 2006.

A. Andreini, R. Da-soghe, B. Facchini, and L. Mazzei, Local source based CFD modeling of effusion cooling holes : validation and application to an actual combustor test case, Proceedings of GT2013, pp.32-33, 2013.

A. Andreini, R. Da-soghe, B. Facchini, L. Mazzei, S. Colantuoni et al., Local source based cfd modeling of effusion cooling holes: Validation and application to an actual combustor test case, Journal of Engineering for Gas Turbines and Power, vol.136, issue.1, p.41, 2014.

A. Andreini, B. Facchini, L. Mazzei, L. Bellocci, and F. Turrini, Assessment of aero-thermal design methodology for effusion cooled lean burn annular combustors, Turbine Technical Conference and Exposition, vol.2, pp.41-42, 2014.

A. Andreini, B. Facchini, A. Picchi, L. Tarchi, and F. Turrini, Experimental and theoretical investigation of thermal effectiveness in multiperforated plates for combustor liner effusion cooling, Journal of Turbomachinery, vol.136, issue.9, p.91003, 2014.

J. Andreopoulos and W. Rodi, Experimental investigation of jets in a crossflow, J. Fluid Mech, vol.138, p.27, 1984.

G. Arroyo-callejo and ;. Espace, Modélisation thermique avancée d'une paroi multiperforée de chambre de combustion aéronautique avec dilution giratoire. PhD thesis, vol.22, p.126, 2016.

G. Arroyo-callejo, E. Laroche, P. Millan, F. Leglaye, and F. Chedevergne, Numerical investigation of compound angle effusion cooling using differential reynolds stress model and zonal detached eddy simulation approaches, Journal of Turbomachinery, vol.138, issue.10, p.16, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01407708

T. Dem-kampe and S. Volker, A model for cylindrical hole film cooling: Part ii-model formulation, implementation and results, ASME Turbo Expo 2010: Power for Land, Sea, and Air, pp.32-33, 2010.

S. Berger, Implementation of a coupled computational chain to the combustion chamber's heat transfer, p.102, 2016.

S. Berger, S. Richard, F. Duchaine, G. Staffelbach, and L. Gicquel, On the sensitivity of a helicopter combustor wall temperature to convective and radiative thermal loads, Applied Thermal Engineering, vol.103, p.112, 2016.

S. Berger, S. Richard, S. G. , F. Duchaine, and L. Gicquel, Aerothermal prediction of an aeronautical combustion chamber based on the coupling of large eddy simulation, solid conduction and radiation solvers. GT2015-42457, vol.4, p.128, 2015.

R. Bizzari and A. Dauptain, Simulation aux grandes échelles du blocage dans un moteur à détonation tournante. working note, ENSEEIHT-CERFACS Toulouse, p.3, 2015.

R. Bizzari, A. Dauptain, and F. Nicoud, An overview of the thermal and aerothermal models developed during my PhD and commonly used now by Safran Helicopter Engine, 5e Colloque du réseau d'INitiative en Combustion Avancée (INCA), p.132, 2018.

R. Bizzari, A. Dauptain, L. Gicquel, and F. Nicoud, A thickened-hole model for les over multiperforated liners, 4e Colloque du réseau d'INitiative en Combustion Avancée (INCA), vol.46, p.132, 2017.

R. Bizzari, M. Ferand, A. Dauptain, G. Staffelbach, S. Richard et al., Mesh local refinement to enhance effusion cooling models, ERCOFTAC, editor, 12th International Symposium on Engineering Turbulence Modelling and Measurements (ETMM12), Montpellier (France), vol.127, p.132, 2018.

R. Bizzari, D. Lahbib, A. Dauptain, F. Duchaine, L. Gicquel et al., A thickened-hole model for large eddy simulations over multiperforated liners. Flow Turbulence and Combustion, Online First Articles:1-13, 2018. 16 citations pages xi, vol.46, p.132
URL : https://hal.archives-ouvertes.fr/hal-02049186

R. Bizzari, D. Lahbib, A. Dauptain, F. Duchaine, S. Richard et al., Low order modeling method for assessing the temperature of multi-perforated plates, International Journal of Heat and Mass Transfer, vol.127, p.132, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02049164

R. Bizzari, D. Lahbib, A. Dauptain, F. Duchaine, S. Richard et al., A model able to assess multiperforated liner's temperature from an unresolved adiabatic simulation, Journée SFT Numérique et couplage thermique, p.132, 2018.

M. Boileau, G. Staffelbach, B. Cuenot, T. Poinsot, and C. Bérat, LES of an ignition sequence in a gas turbine engine, Combust. Flame, vol.154, issue.1-2, p.11, 2008.
URL : https://hal.archives-ouvertes.fr/hal-01981373

R. Bourguet, M. Braza, G. Harran, and R. E. Akoury, Anisotropic organised eddy simulation for the prediction of non-equilibrium turbulent flows around bodies, Journal of Fluids and Structures, vol.24, issue.8, p.12, 2008.

A. M. Briones, B. A. Rankin, S. D. Stouffer, T. J. Erdmann, and D. L. Burrus, Parallelized, automated, and predictive imprint cooling model for combustion systems, Journal of Engineering for Gas Turbines and Power, vol.139, issue.3, p.35, 2017.
DOI : 10.1115/1.4034499

P. Bruel and J. Florenciano, Report on the experimental velocity database, with acoustic forcing for multi-hole plate, deliverable D3.1.5, European program KIAI, www.kiai-project, p.54
URL : https://hal.archives-ouvertes.fr/hal-00868510

A. L. Brundage, M. W. Plesniak, and S. Ramadhyani, Influence of coolant feed direction and hole length on film cooling jet velocity profiles. ASME Paper 99-GT-035, vol.2, pp.25-26, 1999.

A. Burdet, R. S. Abhari, and M. G. Rose, Modeling of Film Cooling-Part II: Model for Use in Three-Dimensional Computational Fluid Dynamics, Journal of turbomachinery, vol.129, issue.2, pp.221-231, 2007.

A. Byerley, P. Ireland, T. Jones, and S. Ashton, Detailed heat transfer measurements near and within the entrance of a film cooling hole, ASME 1988 International Gas Turbine and Aeroengine Congress and Exposition, p.22, 1988.

G. A. Callejo, E. Laroche, P. Millan, and F. Leglaye, A wall-function based model for multi-perforated walls, ASME Turbo Expo 2015: Turbine Technical Conference and Exposition, p.16, 2015.

J. Champion and S. Rouvreau, Plif analysis of mixing phenomena inside an effusion cooling film. Eurotherm series, vol.2, pp.18-54, 2002.

A. P. Colburn, A method of correlating forced convection heat-transfer data and a comparison with fluid friction, International Journal of Heat and Mass Transfer, vol.7, issue.12, pp.39-40, 1964.

O. Colin, F. Ducros, D. Veynante, and T. Poinsot, A thickened flame model for large eddy simulations of turbulent premixed combustion, Phys. Fluids, vol.12, issue.7, p.82, 2000.

O. Colin and M. Rudgyard, Development of high-order taylor-galerkin schemes for les, Journal of Computational Physics, vol.162, issue.2, p.56, 2000.

L. Cortelezzi and A. R. Karagozian, On the formation of the counterrotating vortex pair in transverse jets, J. Fluid Mech, vol.446, p.27, 2001.

G. Cottin, E. Laroche, N. Savary, and P. Millan, Modeling of the heat flux for multi-hole cooling applications, ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition, vol.8, p.102, 2011.

M. E. Crawford, W. M. Kays, and R. J. Moffat, Full-coverage film cooling. part I: Comparison of heat transfer data for three injection angles, J. Eng. Gas Turb. and Power, vol.102, p.15, 1980.

M. E. Crawford, W. M. Kays, and R. J. Moffat, Full-coverage film cooling. part II: Heat transfer data and numerical simulation, J. Eng. Gas Turb. and Power, vol.102, p.32, 1980.

P. I. Crumpton, J. A. Mackenzie, and K. W. Morton, Cell vertex algorithms for the compressible navier-stokes equations, J. Comput. Phys, vol.109, pp.1-15, 1993.

R. Da-soghe, A. Andreini, B. Facchini, and L. Mazzei, Heat transfer enhancement due to coolant extraction on the cold side of effusion cooling plates, Journal of Engineering for Gas Turbines and Power, vol.137, issue.12, p.39, 2015.

G. Daviller, M. Brebion, P. Xavier, G. Staffelbach, J. Müller et al., A mesh adaptation strategy to predict pressure losses in les of swirled flows. Flow, Turbulence and Combustion, vol.99, p.124, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01996244

S. Deck, Numerical simulation of transonic buffet over a supercritical airfoil, AIAA journal, vol.43, issue.7, p.12, 2005.

C. Dobrzynski and P. Frey, Anisotropic delaunay mesh adaptation for unsteady simulations, Proceedings of the 17th international Meshing Roundtable, p.115, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00353786

J. Donéa, B. Roig, and A. Huerta, High-order accurate time-stepping schemes for convection-diffusion problems, Comput. Methods Appl. Mech. Eng, vol.182, p.91, 2000.

F. Duchaine, A. Corpron, L. Pons, V. Moureau, F. Nicoud et al., Development and assessment of a coupled strategy for conjugate heat transfer with large eddy simulation: Application to a cooled turbine blade, Int. J. Heat Fluid Flow, vol.30, issue.6, pp.42-43, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00803384

F. Duchaine, S. Jauré, D. Poitou, E. Quémerais, G. Staffelbach et al., Analysis of high performance conjugate heat transfer with the openpalm coupler, Computational Science & Discovery, vol.8, issue.1, pp.91-93, 2015.

F. Duchaine, N. Maheu, V. Moureau, G. Balarac, and S. Moreau, Largeeddy simulation and conjugate heat transfer around a low-mach turbine blade, Journal of Turbomachinery, vol.136, issue.5, p.93, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01339894

R. K. Dybvig, The SCHEME programming language, p.43, 2009.

V. L. Eriksen and R. J. Goldstein, Heat transfer and film cooling following injection through inclined circular tubes, J. Heat Trans, vol.96, pp.18-54, 1974.

M. Errera and S. Chemin, A fluid-solid thermal coupling applied to an effusion cooling system, 34th AIAA Fluid Dynamics Conference and Exhibit, p.20, 2004.

J. Florenciano, Etude de la réponse d'un écoulement avec transfert pariétal de masse à un forçage acoustique, vol.21, p.52, 2013.

J. Florenciano and P. Bruel, LES fluid-solid coupled calculations for the assessment of heat transfer coefficient correlations over multiperforated walls, Aerospace Science and Technology, vol.53, p.116, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01353952

J. Florenciano and P. Bruel, Les fluid-solid coupled calculations for the assessment of heat transfer coefficient correlations over multi-perforated walls, Aerospace Science and Technology, p.42, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01353952

J. Fourier, Theorie analytique de la chaleur, par M. Fourier. Chez Firmin Didot, père et fils, 1822, p.38
DOI : 10.14711/spcol/b458351
URL : https://babel.hathitrust.org/cgi/imgsrv/download/pdf?id=nnc1.cu50558870;orient=0;size=100;seq=11;attachment=0

R. Fransen, LES based aerothermal modeling of turbine blade cooling systems, p.11, 2013.
URL : https://hal.archives-ouvertes.fr/tel-00870685

B. Franzelli, E. Riber, M. Sanjosé, and T. Poinsot, A two-step chemical scheme for Large-Eddy Simulation of kerosene-air flames, Combust. Flame, vol.157, issue.7, p.82, 2010.

V. Frayssé, L. Giraud, S. Gratton, and J. Langou, A set of GMRES routines for real and complex arithmetics on high performance computers, ACM Trans. Math. Softw, vol.31, issue.2, p.91, 2005.

T. F. Fric and A. Roshko, Vortical structure in the wake of a transverse jet, J. Fluid Mech, vol.279, p.28, 1994.

J. Fröhlich and D. Von-terzi, Hybrid les/rans methods for the simulation of turbulent flows, Progress in Aerospace Sciences, vol.44, issue.5, p.12, 2008.

S. Fu, W. Haase, S. Peng, and D. Schwamborn, Progress in Hybrid RANSLES Modelling: Papers Contributed to the 4th Symposium on Hybrid RANSLES Methods, vol.117, p.12, 2011.

J. W. Gibbs and ;. Gibbs, The scientific papers of, Longmans, Green and Company, vol.1, p.56, 1906.

R. J. Goldstein, Film cooling, Advances in heat transfer, vol.7, pp.321-379, 1971.

P. Grenard and D. Scherrer, A modified wall boundary condition for multiperforated walls, International Journal of Heat and Mass Transfer, vol.67, issue.2, pp.39-40, 2013.
DOI : 10.1016/j.ijheatmasstransfer.2013.07.078

F. Grossi, M. Braza, and Y. Hoarau, Prediction of transonic buffet by delayed detached-eddy simulation, AIAA Journal, vol.52, issue.10, pp.2300-2312, 2014.

K. M. Gustafsson, Experimental Studies of Effusion Cooling, vol.3, p.29, 2001.

W. G. Habashi, J. Dompierre, Y. Bourgault, D. Ait-ali-yahia, M. Fortin et al., Anisotropic mesh adaptation: towards user-independent, mesh-independent and solver-independent cfd. part i: general principles, International Journal for Numerical Methods in Fluids, vol.32, issue.6, p.115, 2000.

C. A. Hale, M. W. Plesniak, and S. Ramadhyani, Film cooling effectiveness for short film cooling holes fed by a narrow plenum, J. Turbomach, vol.122, p.15, 2000.

C. A. Hale, M. W. Plesniak, and S. Ramadhyani, Structural features and surface heat transfer associated with a row of short-hole jets in crossflow, Int. J. Heat Fluid Flow, vol.21, p.28, 2000.

J. Han, S. Dutta, and S. Ekkad, Gas turbine heat transfer and cooling technology, p.21, 2012.

M. Harnieh, M. Thomas, R. Bizzari, L. Gicquel, and F. Duchaine, Assessment of a coolant injection model on cooled high-pressure vanes in large eddy simulation-invited conference, ERCOFTAC, editor, 12th International Symposium on Engineering Turbulence Modelling and Measurements (ETMM12), vol.6, p.132, 2018.

M. K. Harrington, M. A. Mcwaters, D. G. Bogard, C. A. Lemmon, and K. A. Thole, Full-coverage film cooling with short normal injection holes, ASME TURBOEXPO, p.20, 2001.

J. D. Heidmann and S. D. Hunter, Coarse grid modeling of turbine film cooling flows using volumetric source terms, ASME Turbo Expo, p.32, 2001.

J. C. Hunt, A. A. Wray, and P. Moin, Eddies, streams, and convergence zones in turbulent flows, Proc. of the Summer Program, p.23, 1988.

I. V. Iourokina and S. K. Lele, Large eddy simulation of film-cooling above the flat surface with a large plenum and short exit holes, 44th Aerospace Sciences Meeting and Exhibit, 2006.

F. Jaegle, O. Cabrit, S. Mendez, and T. Poinsot, Implementation methods of wall functions in cell-vertex numerical solvers. Flow, turbulence and combustion, vol.85, p.48, 2010.

A. Jameson, W. Schmidt, and E. Turkel, Numerical solution of the euler equations by finite volume methods using runge-kutta time stepping schemes, editor, 14th Fluid and Plasma Dynamic Conference, p.56, 1981.

S. Jauré, Methodology for conjugate heat transfer simulations relying on Large Eddy Simulations in massively parallel environments, vol.2, pp.42-92, 2012.

S. Jauré, F. Duchaine, and L. Gicquel, Comparisons of coupling strategies for massively parallel conjugate heat transfer with large eddy simulation, IV International Conference on Computational Methods for Coupled Problems in Science and Engineering, vol.2, pp.42-93, 2011.

S. Jauré, F. Duchaine, G. Staffelbach, and L. Y. Gicquel, Massively parallel conjugate heat transfer methods relying on large eddy simulation applied to an aeronautical combustor, Computational Science & Discovery, vol.6, issue.1, p.93, 2013.

B. Johnson, K. Zhang, W. Tian, and H. Hu, An experimental study of film cooling effectiveness by using piv and psp techniques, 51st AIAA Aerospace Sciences Meeting, p.20, 2013.

B. A. Kader, Temperature and concentration profiles in fully turbulent boundary layers, Int. J. Heat and Mass Transfer, vol.24, issue.9, p.39, 1981.

V. U. Kakade, S. J. Thorpe, and M. Gerendás, Effusion-cooling performance at gas turbine combustor representative flow conditions, ASME Turbo Expo 2012: Turbine Technical Conference and Exposition, p.20, 2012.

R. W. Kaszeta, Measurements in Film Cooling Flows with Lateral Injection, p.16, 1998.

R. W. Kaszeta, T. W. Simon, R. A. Oke, and S. W. Burd, Flow measurements in film cooling flows with lateral injection, p.16, 1996.

R. M. Kelso, T. T. Lim, and A. E. Perry, An experimental study of round jets in cross-flow, J. Fluid Mech, vol.306, p.27, 1996.

C. Koren, R. Vicquelin, and O. Gicquel, High-fidelity multiphysics simulation of a confined premixed swirling flame combining large-eddy simulation, wall heat conduction and radiative energy transfer, ASME Turbo-161Bibliography Expo 2017: Turbomachinery Technical Conference and Exposition, p.112, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01781003

C. Koupper, G. Caciolli, L. Gicquel, F. Duchaine, G. Bonneau et al., Development of an engine representative combustor simulator dedicated to hot streak generation, Journal of Turbomachinery, vol.136, issue.11, p.85, 2014.

C. Koupper, L. Gicquel, F. Duchaine, and G. Bonneau, Advanced combustor exit plane temperature diagnostics based on large eddy simulations. Flow, Turbulence and Combustion, vol.95, p.47, 2015.

L. Labarrère, Etude théorique et numérique de la combustion à volume constant appliquée à la propulsion, vol.3, 2016.

, Cité page 3

L. Labarrère, T. Poinsot, A. Dauptain, F. Duchaine, M. Bellenoue et al., Experimental and numerical study of cyclic variations in a constant volume combustion chamber, Combustion and Flame, vol.172, pp.49-61, 2016.

D. Lahbib, Modélisation aérodynamique et thermique des multiperforations en LES, Structures et Systèmes (I2S), 12 2015. 7 citations pages 21, vol.29, p.102

D. Lahbib, A. Dauptain, F. Duchaine, and F. Nicoud, Large eddy simulation of conjugate heat transfer around a multi-perforated plate with deviation, ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition, vol.4, p.91, 2016.
URL : https://hal.archives-ouvertes.fr/hal-02050132

B. Lakshminarayana, Fluid dynamics and heat transfer of turbomachinery, 1995.

N. Lamarque, Schémas numériques et conditions limites pour la simulation aux grandes échelles de la combustion diphasique dans les foyers d'hélicoptère, p.56, 2007.

H. Latzko, Heat transfer in a turbulent liquid or gas stream, p.39, 1944.

P. Lax and B. Wendroff, Systems of conservation laws, Communications on Pure and Applied mathematics, vol.13, issue.2, p.56, 1960.

P. D. Lax and B. Wendroff, Systems of conservation laws, Commun. Pure Appl. Math, vol.13, pp.217-237, 1960.

P. D. Lax and B. Wendroff, Difference schemes for hyperbolic equations with high order of accuracy, Commun. Pure Appl. Math, vol.17, p.56, 1964.

E. L. Grivès, J. Nicolas, and J. Génot, Internal aerodynamics and heat transfer problems associated to film cooling of gas turbines, ASME 1979 International Gas Turbine Conference and Exhibit and Solar Energy Conference, p.39, 1979.

P. V. Lebrocq, B. E. Launder, and C. H. Priddin, Discrete hole injection as a means of transpiration cooling; an experimental study, Proc. Instn. Mech. Engrs, vol.187, issue.17, pp.6-15, 1973.

A. H. Lefebvre, Gas Turbines Combustion. Taylor & Francis, 1999. 2 citations pages, pp.7-8

B. Leger, P. Miron, and J. M. Emidio, Geometric and aero-thermal influences on multiholed plate temperature: application on combustor wall, International Journal of Heat and Mass Transfer, vol.46, issue.7, p.20, 2003.

M. Lesieur, O. Métais, and P. Comte, Large-Eddy Simulations of Turbulence, p.11, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00261551

J. H. Leylek and R. D. Zerkle, Discrete-jet film cooling: A comparison of computational results with experiments, J. Turbomach, vol.116, pp.25-26, 1994.

D. G. Macmanus and J. A. Eaton, Flow physics of discrete boundary layer suction-measurements and predictions, J. Fluid Mech, vol.417, p.22, 2000.

F. D. Mare, W. P. Jones, and K. Menzies, Large eddy simulation of a model gas turbine combustor, Combust. Flame, vol.137, p.11, 2004.

R. J. Margason, The path of a jet directed at large angles to a subsonic free stream, NASA, p.29, 1968.

R. J. Margason, Fifty years of jet in crossflow research, Computational and Experimental Assessment of Jets in Crossflow, p.29, 1993.

M. Martiny, A. Schulz, and S. Wittig, Full-coverage film cooling investigations: adiabatic wall temperatures and flow visualization, ASME paper, p.95

M. Martiny, A. Schulz, and S. Wittig, Mathematical model describing the coupled heat transfer in effusion cooled combustor walls, ASME 1997 International Gas Turbine and Aeroengine Congress and Exhibition, p.39, 1997.

J. D. Mattingly, Elements of gas turbine propulsion, McGraw-Hill Science, Engineering & Mathematics, vol.1, p.18, 1996.

R. E. Mayle and F. J. Camarata, Multihole cooling effectiveness and heat transfer, J. Heat Trans, vol.97, p.16, 1975.

L. Mazzei, A. Andreini, and B. Facchini, Assessment of modelling strategies for film cooling, International Journal of Numerical Methods for Heat & Fluid Flow, vol.27, issue.5, p.140, 2017.

L. Mazzei, A. Andreini, B. Facchini, and L. Bellocci, A 3d coupled approach for the thermal design of aero-engine combustor liners, ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition, p.43, 2016.

S. Mendez, Simulation numérique et modélisation de l'écoulement autour des parois multi-perforées-th/cfd/07/104, p.29, 2007.

S. Mendez and F. Nicoud, Adiabatic homogeneous model for flow around a multiperforated plate, AIAA Journal, vol.46, issue.10, p.1, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00820458

S. Mendez and F. Nicoud, Large-eddy simulation of a bi-periodic turbulent flow with effusion, J. Fluid Mech, vol.598, pp.27-65, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00820464

D. E. Metzger, D. I. Takeuchi, and P. A. Kuenstler, Effectiveness and heat transfer with full-coverage film-cooling. ASME Paper 73-GT-18, p.15, 1973.

B. Michel, P. Gajan, A. Strzelecki, A. Kourta, and H. Boisson, Simulation numérique d'une zone d'injection pariétale pour une chambre de combustion de turbomachine, 18ème Congrès Français de Mécanique, vol.16, 2007.

B. Michel, P. Gajan, A. Strzelecki, N. Savary, A. Kourta et al., Full coverage film cooling using compound angle, Comptes Rendus Mécanique, vol.337, issue.6-7, pp.562-572, 2009.

A. Mills, Experimental investigation of turbulent heat transfer in the entrance region of a circular conduit, Journal of Mechanical Engineering Science, vol.4, issue.1, p.39, 1962.

P. Miron, Étude expérimentale des lois de parois et du film de refroidissement produit par une zone multiperforée sur une paroi plane, p.116, 2005.

P. Miron, C. Bérat, and V. Sabelnikov, Effect of blowing rate on the film cooling coverage on a multi-holed plate: application on combustor walls, Eighth International Conference on Heat Transfer, vol.3, p.52, 2004.

A. Most, N. Savary, and C. Bérat, Reactive flow modelling of a combustion chamber with a multiperforated liner, pp.20-47, 2007.

V. Moureau, P. Domingo, and L. Vervisch, Design of a massively parallel cfd code for complex geometries, Comptes Rendus Mécanique, vol.339, issue.2, p.57, 2011.
URL : https://hal.archives-ouvertes.fr/hal-01672172

V. Moureau, G. Lartigue, Y. Sommerer, C. Angelberger, O. Colin et al., Numerical methods for unsteady compressible multi-component reacting flows on fixed and moving grids, J. Comput. Phys, vol.202, issue.2, p.56, 2005.
URL : https://hal.archives-ouvertes.fr/hal-01629982

S. Muppidi and K. Mahesh, Study of trajectories of jets in crossflow using direct numerical simulations, J. Fluid Mech, vol.530, p.27, 2005.

S. Muppidi and K. Mahesh, Two-dimensional model problem to explain counter-rotating vortex pair formation in a transverse jet, Phys. Fluids, vol.18, issue.8, p.27, 2006.

S. Muppidi and K. Mahesh, Direct numerical simulation of round turbulent jets in crossflow, J. Fluid Mech, vol.574, p.27, 2007.

T. New, T. Lim, and S. Luo, Elliptic jets in cross-flow, Journal of fluid mechanics, vol.494, pp.27-28, 2003.

A. Nezu and . Tominaga, Law of the wall lin/log diagram. Asakura Shoten, p.14, 2000.

F. Nicoud and F. Ducros, Subgrid-scale stress modelling based on the square of the velocity gradient tensor. Flow, turbulence and Combustion, vol.62, p.57, 1999.
URL : https://hal.archives-ouvertes.fr/hal-00910373

F. Nicoud, H. Toda, O. Cabrit, S. Bose, and J. Lee, Using singular values to build a subgrid-scale model for large eddy simulations, Physics of Fluids, vol.23, issue.8, p.85106, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00802472

Y. V. Peet, Film cooling from inclined cylindrical holes using Large-Eddy Simulations, vol.4, p.28, 2006.

S. D. Peterson and M. W. Plesniak, Short-hole jet-in-crossflow velocity field and its relationship to film-cooling performance, Exp. Fluids, vol.33, p.24, 2002.

S. D. Peterson and M. W. Plesniak, Evolution of jets emanating from short holes into crossflow, J. Fluid Mech, vol.503, pp.24-28, 2004.

B. Petre, Étude des échanges convectifs en espace confiné le long d'une paroi multiperforée, vol.2, pp.17-19, 2001.

B. Petre, E. Dorignac, and J. J. Vullierme, Study of the influence of the number of holes rows on the convective heat transfer in the case of full coverage film cooling, Int. J. Heat and Mass Transfer, vol.2, pp.52-116, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00131180

J. Pietrzyk, D. Bogard, and M. Crawford, Effects of density ratio on the hydrodynamics of film cooling, ASME 1989 International Gas Turbine and Aeroengine Congress and Exposition, p.22, 1989.

J. R. Pietrzyk, D. G. Bogard, and M. E. Crawford, Hydrodynamic measurements of jets in crossflow for gas turbine film cooling applications, J. Turbomach, vol.111, pp.16-22, 1989.

T. Poinsot and D. Veynante, Third Edition (www.cerfacs.fr/elearning), p.12, 2011.

S. B. Pope, Turbulent flows, p.11, 2000.
URL : https://hal.archives-ouvertes.fr/hal-00712179

R. Poprawe, I. Kelbassa, K. Walther, M. Witty, D. Bohn et al., Optimising and manufacturing a laser-drilled cooling hole geometry for effusion-cooled multi-layer plates, Proc. of ISROMAC-12, pp.8-71, 2008.

C. Priere, L. Gicquel, P. Kaufmann, W. Krebs, and T. Poinsot, Large eddy simulation predictions of mixing enhancement for jets in cross-flows, Journal of Turbulence, vol.5, issue.005, pp.17-56, 2004.

A. Refloch, B. Courbet, A. Murrone, P. Villedieu, C. Laurent et al., Cfd platforms and coupling-cedre software, The Onera Journal Aerospace Lab, issue.2, 2011.

S. Rida, R. Reynolds, S. Chakravotry, and K. Gupta, Imprinted effusion modeling and dynamic cd calculation in gas turbine combustors, ASME, vol.3, p.34, 2012.

N. Rizk and H. Mongia, Low NOx rich-lean combustion concept application, AIAA paper, pp.91-1962, 1991.

M. C. Rochoux, S. Ricci, D. Lucor, B. Cuenot, and A. Trouvé, Towards predictive data-driven simulations of wildfire spread-part i: Reduced-cost ensemble kalman filter based on a polynomial chaos surrogate model for parameter estimation, Natural Hazards and Earth System Sciences, vol.14, issue.11, p.91, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01332351

S. Rouvreau, Etude expérimentale de la structure moyenne et instantanée d'un film produit par une zone multiperforée sur une paroi plane, ENSMA, p.30, 2001.

M. Rudgyard and T. Schönfeld, Steady and unsteady flow simulations using the hybrid flow solver avbp, AIAA journal, vol.37, issue.11, p.56, 1999.

P. Sagaut, Introduction à la simulation des grandes échelles, p.13, 1998.

P. Sagaut, Large eddy simulation for incompressible flows, p.11, 2002.

N. Savary, B. Michel, and P. Gajan, Validation and benefits of a homogeneous effusion cooling model for combustor rans simulations, 47th AIAA Aerospace Sciences Meeting including The New Horizons Forum and Aerospace Exposition, p.36, 2009.

A. Schulz, Combustor liner cooling technology in scope of reduced pollutant formation and rising thermal efficiencies, Annals of the New York Academy of Sciences, vol.934, issue.1, pp.135-146, 2001.

J. J. Scrittore, K. A. Thole, and S. W. Burd, Investigation of velocity profiles for effusion cooling of a combustor liner, J. Turbomach, vol.129, p.20, 2007.

A. K. Sinha, D. G. Bogard, and M. E. Crawford, Film-cooling effectiveness downstream of a single row of holes with variable density ratio, J. Turbomach, vol.113, p.16, 1991.

J. Smagorinsky, General circulation experiments with the primitive equations: 1. the basic experiment, Mon. Weather Rev, vol.91, pp.82-167, 1963.

P. R. Spalart, Comments on the feasibility of les for wings, and on a hybrid rans/les approach, Proceedings of first AFOSR international conference on DNS/LES, p.12, 1997.

P. R. Spalart, S. Deck, M. L. Shur, K. D. Squires, M. K. Strelets et al., A new version of detached-eddy simulation, resistant to ambiguous grid densities, Theoretical and computational fluid dynamics, vol.20, issue.3, p.12, 2006.

B. Tartinville and C. Hirsch, Modelling of film cooling for turbine blade design, ASME Turbo Expo, pp.2219-2228, 2008.

, American Society of Mechanical Engineers, p.32, 2008.

M. Thomas, A. Dauptain, F. Duchaine, L. Gicquel, C. Koupper et al., Comparison of heterogeneous and homogeneous coolant injection models for large eddy simulation of multiperforated liners present in a combustion simulator, ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, vol.2, pp.84-85, 2017.
URL : https://hal.archives-ouvertes.fr/hal-02050150

H. B. Toda, O. Cabrit, K. Truffin, G. Bruneaux, and F. Nicoud, Assessment of subgrid-scale models with a large-eddy simulation-dedicated experimental database: The pulsatile impinging jet in turbulent cross-flow, Phys. Fluids, vol.26, issue.7, p.56, 2014.

M. Tyagi and S. Acharya, Large eddy simulation of film cooling flow from an inclined cylindrical jet, J. Turbomach, vol.125, pp.27-29, 2003.

S. Voigt, B. Noll, and M. Aigner, Development of a macroscopic CFD model for effusion cooling applications. ASME Paper No. GT2012-68251, vol.33, p.41, 2012.

D. K. Walters and J. H. Leylek, A detailed analysis of film-cooling physics: Part 1-streamwise injection with cylindrical holes, J. Turbomach, vol.122, pp.24-26, 2000.

P. Wolf, G. Staffelbach, L. Gicquel, J. Muller, and T. Poinsot, Acoustic and large eddy simulation studies of azimuthal modes in annular combustion chambers, Combust. Flame, vol.159, issue.11, p.11, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00801825

F. Zhong and G. Brown, Experimental study of multi-hole cooling for integrally-woven, ceramic matrix composite walls for gas turbine applications, Int. J. Heat and Mass Transfer, vol.52, issue.3, pp.971-985, 2009.

F. Zhong and G. L. Brown, A 3-dimensional, coupled, dns, heat transfer model and solution for multi-hole cooling, Int. J. Heat and Mass Transfer, vol.50, pp.1328-1343, 2007.