M. D. Feudis, Diamond Graphitization by laser-writing for all-carbon detector applications, Diam. Relat. Mater, vol.75, pp.25-33, 2017.

A. Taurino, M. Catalano, and M. De-feudis, Graphitization of diamond by means of UV laser writing: a transmission electron microscopy study, Microsc. Microanal, vol.23, p.2017

R. Assiro, A. P. Caricato, G. Chiodini, M. Corrado, and M. De-feudis, Performance of the diamond active target prototype for the PADME experiment at the DA?NE BTF, 2017.

M. D. Feudis, Characterization of surface graphitic electrodes made by excimer laser on CVD diamond, Diam. Relat. Mater, vol.65, pp.137-143, 2016.

. , Status and prospects for the PADME experiment at LNF, Papers as member of the PADME experiment collaboration 1. P. Gianotti on behalf of the, vol.166, p.9, 2018.

. , The PADME experiment for dark mediator searches at the Frascati BTF, J. Inst, vol.12, p.2037, 2017.

. , A diamond active target for the PADME experiment, J. Inst, vol.12, p.2036, 2017.

. , The PADME experiment at DA?NE LINAC, Proceeding of the 38 th International Conference on High Energy Physics ICHEP, vol.204, 2016.

. , The PADME experiment at INFN LNF, Journal of Physics: Conference Series, vol.770, p.12039, 2016.

F. Oliva, R. Assiro, A. P. Caricato, G. Chiodini, M. Corrado et al., Beam test results of PADME full carbon active diamond target, Proceeding of the Conference Incontri di Fisica delle Alte Energie IFAE, p.81, 2017.

M. D. Feudis, Diamond detectors with electrodes graphitized by means of laser, Proceeding of the Conference Incontri di Fisica delle Alte Energie IFAE, p.254, 2016.

M. D. Feudis, Realization and characterization of graphitic contacts on diamond by means of laser, Proceeding of the IV Workshop on Plasmi Sorgenti Biofisica e Applicazioni PSBA, pp.63-68, 2015.

, Laser-induced graphitization of diamonds for demanding applications in nuclear physics, Communications at International Conferences 1. Award: 9 1 st PLACE as Best Young Researcher Presentation "Roger Kelly Award" M. De Feudis, 2016.

M. D. Feudis, Laser-induced graphitization of diamonds for demanding applications in nuclear physics, International Symposium, 2016.

D. Feudis, Ohmic metal-graphite contacts on lightly boron-doped diamonds, International Conference on Diamond and Carbon Materials ICDMC17, 2017.

D. Feudis, Two-dimensional characterization of laser-induced graphitic strips on CVD diamond, International Conference on Diamond and Carbon Materials ICDMC16, 2016.

M. D. Feudis, Characterization of surface graphitic electrodes made by excimer laser on CVD diamond, International Conference on Diamond and Carbon Materials ICDMC15, 2015.

, Communications at National Conferences, vol.1

M. D. Feudis, Realization and characterization of graphitic contacts on diamond by means of laser, IV workshop nazionale su Plasmi, Sorgenti Biofisica e Applicazioni (PSBA), vol.17, 2014.

M. D. Feudis, Rivelatori a diamante con elettrodi grafitati mediante laser, Conferenza nazionale di Incontri di Fisica delle Alte Energie (IFAE), pp.8-10, 2015.

, Communications at PhD Schools, vol.1

M. D. Feudis, Laser-induced graphitization of diamonds for demanding applications in nuclear physics, 5 th International School on Lasers in Materials Science-SLIMS, 2016.

M. D. Feudis, Realizzazione di contatti grafitici per rivelatori a diamante full-carbon, XXVII Seminario Nazionale di Fisica Nucleare e Subnucleare "Francesco Romano, 2015.

M. D. Feudis, Ohmic metal-graphite contacts on single crystal diamond produced by He implantation, Communications at International Conferences as co-author 1. Talk: 9, 2017.

A. Taurino, M. Catalano, and M. De-feudis, Graphitization of diamond by means of UV laser writing: a transmission electron microscopy study, International Conference on Microscopy & Microanalyses, vol.2, 2017.

M. D. Feudis, Morphological and structural study of the laser-induced diamond to graphite transformation, th International Conference of Photoexcited Processes and Applications-ICPEPA, vol.10, 2016.

, Appendix B: Institutes of collaboration and visited laboratory 174

, Appendix B: Institutes of collaboration and visited laboratory Institutes of collaboration 9 INFN National Institute of Nuclear Physics (I have been an associate member during my PhD) 9 University of Paris Diderot, 2015.

J. E. Field, The Properties of Natural and Synthetic Diamond, 1992.

A. Mainwood, Recent developments of diamond detectors for particles and UV radiation, Semiconductor Science and Technology, vol.15, issue.9, pp.55-63, 2000.

S. N. Ahmed, Physics and Engineering of Radiation Detection, 2007.

R. S. Balmer, Chemical vapour deposition synthetic diamond: materials, technology and applications, Journal of Physics: Condensed Matter, vol.21, issue.36, p.364221, 2009.

L. S. Pan and D. R. Kania, Diamond: electronic properties and applications, Springer science + business media LLC ed, 1995.

W. G. Eversole, Synthesis of diamond, 1958.

B. V. Spitsyn and B. V. Deryagin, A technique of diamond growth on diamond's face. 1956, Inventor's certificate 339, vol.134

B. V. Spitsyn, L. L. Bouilov, and B. V. Derjaguin, Vapor growth of diamond on diamond and other surfaces, Journal of Crystal Growth, vol.52, pp.219-226

B. V. Spitsyn and L. L. Builov, The growth of diamond and diamond like films from a gaz phase, Proceeding of the Diamond and diamond-like materials synthesis, pp.3-14, 1988.

B. V. Spitsyn, Diamond films : Synthesis, properties and some fields of application, Proceeding of the Science and Technology of New Diamond, pp.1-7, 1990.

B. Spitsyn, Chemical cristallisation from the activated vapour phase, Journal of Crystal Growth, vol.99, pp.1162-1167, 1990.

M. Raggi and V. Kozhuharov, Proposal to Search for a Dark Photon in Positron on Target Collisions at DANE Linac, Advances in High Energy Physics, vol.2014, issue.959802, p.14, 2014.

G. Davies, Properties and Growth of Diamond, INSPEC, Institution of Electrical Engineers, 1994.

V. I. Konov, Laser in micro and nanoprocessing of diamond materials, Laser & Photonics Reviews, vol.6, issue.6, pp.739-766, 2012.

M. Pomorski, Electronic properties of signle crystal CVD diamond and its suitability for particle detection in hadron physics experiments, 2008.

W. Von-bolton, The segregation of carbon in diamond form, Elektrochemie, vol.17, pp.971-972, 1911.

F. P. Bundy, Man-made diamond, Nature, vol.176, pp.51-55

F. P. Bundy, The P and T phase and reaction diagram for elemental carbon, Journal of Geophysical Research, vol.85, issue.B12, p.6930, 1980.
DOI : 10.1029/jb085ib12p06930

P. M. Martineau, Identification of Synthetic Diamond Grown Using Chemical Vapor Deposition (CVD) Gems & Gemology, vol.40, p.2, 2004.
DOI : 10.5741/gems.40.1.2

URL : https://www.gia.edu/doc/Spring-2004-Gems-Gemology-Identification-Synthetic-Diamond-CVD.pdf

J. E. Shigley, The gemmological properties of the De Beers gem-quality synthetic diamonds, Gems and Gemology, vol.23, issue.4, pp.187-206, 1987.

W. Q. Liu, Effects of additive Al on the HPHT diamond synthesis in an Fe-Mn-C system, Diamond and Related Materials, vol.16, issue.8, pp.1486-1489, 2007.

D. 'haenens-johansson and U. F. , Large Colorless HPHT Synthetic Diamonds from New Diamond Technology, Contributions to Gemology, vol.15, pp.1-7, 2015.

B. Deljanin, NDT breaking the 10ct barrier: World Record faceted and gem-quality diamonds investigated, Contributions to Gemology, vol.15, 2015.

H. Sumiya, K. Harano, and K. Tamasaku, HPHT synthesis and crystalline quality of large high-quality (001) and (111) diamond crystals, Diamond and Related Materials, vol.58, pp.221-225, 2015.

S. Hitoshi and T. Kenji, Large Defect-Free Synthetic Type IIa Diamond Crystals Synthesized via High Pressure and High Temperature, Japanese Journal of Applied Physics, vol.51, p.90102

T. R. Anthony, Metastable synthesis of diamond, in The Physic and Chemistry of Carbides; Nitrides and Borides, 1990.

A. Gicquel, CVD diamond films: from growth to applications, Current Applied Physics, vol.1, issue.6, pp.479-496, 2001.
DOI : 10.1016/s1567-1739(01)00061-x

A. Gicquel, Le diamant métastable : matériau stratégique ?-partie I-: Les procédés de production, les applications optiques et opto-électroniques, 1996.

R. E. Clausing, Electron microscopy of the growth features and crystal structures of filament assisted CVD diamond films, Surface and Coatings Technology, vol.34, pp.199-210, 1989.

M. Kamo, Diamond synthesis from gas phase in microwave plasma, Journal of Crystal Growth, vol.62, pp.642-644, 1983.
DOI : 10.1016/0022-0248(83)90411-6

A. Gicquel, Validation of actinometry for estimating relative hydrogen atom densities and electron energy evolution in plasma assisted diamond deposition reactors, Journal of Applied Physics, vol.83, issue.12, pp.7504-7521, 1998.

K. Hassouni, T. A. Grotjohn, and A. Gicquel, Self-consistent microwave field and plasma discharge simulations for a moderate pressure hydrogen discharge reactor, Journal of Applied Physics, vol.86, issue.1, pp.134-151, 1999.
DOI : 10.1109/plasma.1998.677636

K. Hassouni, F. Silva, and A. Gicquel, Modelling of diamond deposition microwave cavity generated plasmas, Journal of Physics D-Applied Physics, vol.43, issue.15, p.153001, 2010.
DOI : 10.1088/0022-3727/43/15/153001

A. Gicquel, Ground state and excited state H-atom temperatures in a microwave plasma diamond deposition reactor, Journal de physique III, vol.6, pp.1167-1180, 1996.
DOI : 10.1051/jp3:1996176

URL : https://hal.archives-ouvertes.fr/jpa-00249515

K. Hassouni, Modeling of H2 and H2/CH4 Moderate-Pressure Microwave Plasma Used for Diamond Deposition, Plasma Chemistry and Plasma Processing, vol.18, pp.325-362, 1998.

J. Achard, High quality MPACVD diamond single crystal growth: high microwave power density regime, Journal of Physics D: Applied Physics, vol.40, issue.20, pp.6175-6188, 2007.
DOI : 10.1088/0022-3727/40/20/s04

J. Achard, The control of growth parameters in the synthesis of high-quality single crystalline diamond by CVD, Journal of Crystal Growth, vol.284, pp.396-405, 2005.

G. Z. Cao, Growth of {100} textured diamond films by the addition of nitrogen, Journal of Applied Physics, vol.79, issue.3, pp.1357-64, 1996.

J. S. and T. D. Moustakas, Effect on nitrogen on the growth of diamond films, Applied Physics Letters, vol.65, issue.4, pp.403-405, 1994.

A. Tallaire, Characterisation of high-quality thick single-crystal diamond grown by CVD with a low nitrogen addition, Diamond and Related Materials, vol.15, issue.10, pp.1700-1707, 2006.

A. Van-der-drift, Evolutionary selection, a principle governing growth orientation in vapourdeposited layers, Philips Research Reports, pp.267-288, 1967.

N. Vaissière, Synthèse de films de diamant de haute qualité cristalline pour la réalisation de dosimètres pour la radiothérapie, 2014.

A. K. Mallik, N. Dandapat, and S. Chakraborty, Characterizations of microwave plasma CVD grown polycrystalline diamond coatings for advanced technological applications, Processing and Application of Ceramics, vol.8, issue.2, pp.69-80, 2014.
DOI : 10.2298/pac1402069m

URL : https://doi.org/10.2298/pac1402069m

O. Brinza, Stratégies pour la croissance de cristaux de diamant par CVD assisté par plasma micro-onde, 2009.

A. Tallaire, Thick CVD diamond films grown on high-quality type IIa HPHT diamond substrates from New Diamond Technology, Diamond and Related Materials, vol.77, pp.146-152, 2017.
DOI : 10.1016/j.diamond.2017.07.002

A. Tallaire, Reduction of Dislocations in Single Crystal Diamond by Lateral Growth over a Macroscopic Hole, Advanced Materials, p.1604823, 2017.

M. Naamoun, Reduction of dislocation densities in single crystal CVD diamond by using self-assembled metallic masks, Diamond and Related Materials, vol.58, pp.62-68, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01729247

J. Achard, Improvement of dislocation density in thick CVD single crystal diamond films by coupling H2/O2 plasma etching and chemo-mechanical or ICP treatment of HPHT substrates, Physica Status Solidi, pp.2264-2267, 2014.

A. Tallaire, Growth strategy for controlling dislocation densities and crystal morphologies of single crystal diamond by using pyramidal-shape substrates, Diamond and Related Materials, vol.33, issue.0, pp.71-77, 2013.

M. Naamoun, Influence of surface misorientation of HPHT diamond substrates on crystal morphologies and threading dislocations propagation, Physica Status Solidi (a), vol.210, issue.10, pp.1985-1990, 2013.

C. Tavares, S. Koizumi, and H. Kanda, Effects of RIE treatments for {111} diamond substrates on the growth of P-doped diamond thin films, physica status solidi (a), pp.2129-2133, 2005.

P. Volpe, Defect analysis and excitons diffusion in undoped homoepitaxial diamond films after polishing and oxygen plasma etching, Diamond and Related Materials, vol.18, issue.10, pp.1205-1210, 2009.
DOI : 10.1016/j.diamond.2009.04.008

URL : https://hal.archives-ouvertes.fr/hal-00967297

A. Tallaire, Origin of growth defects in CVD diamond epitaxial films, Diamond and Related Materials, vol.17, issue.1, pp.60-65, 2008.
DOI : 10.1016/j.diamond.2007.10.003

C. Saguy, Diffusion of hydrogen in undoped, p-type and n-type doped diamonds, Diamond and Related Materials, vol.12, issue.3, pp.623-631, 2003.

W. Tsai, Diamond MESFET using ultrashallow RTP boron doping, IEEE Electron Device Letters, vol.12, issue.4, pp.157-159, 1991.
DOI : 10.1109/55.75749

G. Popovici, Diffusion of boron, lithium, oxygen, hydrogen, and nitrogen in type IIa natural diamond, Journal of Applied Physics, vol.77, issue.10, pp.5103-5106, 1995.

O. B. Krutko, P-type polycrystalline diamond layers by rapid thermal diffusion of boron, Applied Physics Letters, vol.76, issue.7, pp.849-851, 2000.
DOI : 10.1063/1.125605

V. S. Vavilov, Ion implantation into diamond, Radiation Effects, vol.37, issue.3-4, pp.229-236, 1978.
DOI : 10.1080/00337577808233194

F. Fontaine, Boron implantation/in situ annealing procedure for optimal p type properties of diamond, Applied Physics Letters, vol.68, issue.16, pp.2264-2266, 1996.

C. Uzan-saguy, Formation of delta-doped, buried conducting layers in diamond, by high-energy, B-ion implantation, Diamond and Related Materials, vol.7, issue.10, pp.1429-1432, 1998.

R. Kalish, Nitrogen doping of diamond by ion implantation, Diamond and Related Materials, vol.6, pp.516-520, 1997.

S. Prawer and R. Kalish, Ion-beam-induced transformation of diamond, Physical Review B, vol.51, issue.22, pp.15711-15722, 1995.
DOI : 10.1103/physrevb.51.15711

C. Uzansaguy, Damage threshold for ionbeam induced graphitization of diamond, Applied Physics Letters, vol.67, issue.9, pp.1194-1196, 1995.

N. Tsubouchi, Formation of a heavily B doped diamond layer using an ion implantation technique, Diamond and Related Materials, vol.17, pp.498-501, 2008.
DOI : 10.1016/j.diamond.2007.12.004

K. Ueda, M. Kasu, and T. Makimoto, High-pressure and high-temperature annealing as an activation method for ion-implanted dopants in diamond, Applied Physics Letters, vol.90, issue.12, pp.122102-122105, 2007.
DOI : 10.1063/1.2715034

K. Ueda and M. Kasu, High-pressure and high-temperature annealing effects of boronimplanted diamond, Diamond and Related Materials, vol.17, issue.4-5, pp.502-505, 2008.

K. Ueda and M. Kasu, High-pressure and high-temperature annealing of diamond ionimplanted with various elements, Diamond and Related Materials, vol.17, issue.7, pp.1269-1272, 2008.
DOI : 10.1016/j.diamond.2008.01.054

J. Michl, Perfect alignment and preferential orientation of nitrogen-vacancy centers during chemical vapor deposition diamond growth on (111) surfaces, Applied Physics Letters, vol.104, issue.10, p.102407, 2014.

E. Neu, Photonic nano-structures on (111)-oriented diamond, Applied Physics Letters, vol.104, issue.15, p.153108, 2014.
DOI : 10.1063/1.4871580

URL : http://edoc.unibas.ch/35515/1/20150119133813_54bcfab5045fc.pdf

N. Casanova, Epitaxial growth of phosphorus doped diamond on {111} substrate, Diamond and Related Materials, vol.11, issue.3, pp.328-331, 2002.
DOI : 10.1016/s0925-9635(02)00012-2

M. Suzuki, Electrical characterization of phosphorus-doped n-type homoepitaxial diamond layers, Diamond and Related Materials, vol.13, pp.2037-2040, 2004.
DOI : 10.1016/j.diamond.2004.06.022

S. Koizumi, Growth and characterization of phosphorous doped {111} homoepitaxial diamond thin films, Applied Physics Letters, vol.71, issue.8, pp.1065-1067, 1997.

H. Kato, Growth of phosphorus-doped diamond using tertiarybutylphosphine and trimethylphosphine as dopant gases, Diamond and Related Materials, vol.14, issue.3, pp.340-343, 2005.

T. Kociniewski, n-type CVD diamond doped with phosphorus using the MOCVD technology for dopant incorporation, Physica Status Solidi, issue.12, pp.3136-3141, 2006.

M. Pinault-thaury, High fraction of substitutional phosphorus in a (100) diamond epilayer with low surface roughness, Applied Physics Letters, vol.100, p.192109, 2012.

H. Kato, S. Yamasaki, and H. Okushi, n-type doping of (001)-oriented single-crystalline diamond by phosphorus, Applied Physics Letters, vol.86, issue.22, pp.222111-222114, 2005.

M. Pinault-thaury, Electrical activity of (100) n-type diamond with full donor site incorporation of phosphorus, physica status solidi (a), 2015.

G. Frangieh, Incorporation of arsenic in diamond grown by chemical vapor deposition, physica status solidi (a), pp.2207-2210, 2008.

J. Barjon, F. Jomard, and S. Morata, Arsenic-bound excitons in diamond, Physical Review B, vol.89, issue.4, p.45201, 2014.

R. Locher, Optical and electrical characterization of boron-doped diamond films, Diamond and Related Materials, vol.4, pp.678-683, 1995.

H. Okushi, High quality homoepitaxial CVD diamond for electronic devices, Diamond and Related Materials, vol.10, issue.3-7, pp.281-288, 2001.

M. Kasu, Formation of stacking faults containing microtwins in (111) chemical-vapordeposited diamond homoepitaxial layers, Applied Physics Letters, vol.83, issue.17, pp.3465-3467, 2003.

K. Ushizawa, Boron concentration dependence of Raman spectra on {100} and {111} facets of B-doped CVD diamond, Diamond and Related Materials, vol.7, pp.1719-1722, 1998.

A. Deneuville, Highly and heavily boron doped diamond films, Diamond and Related Materials, vol.16, issue.4-7, pp.915-920, 2007.

S. N. Demlow, R. Rechenberg, and T. Grotjohn, The effect of substrate temperature and growth rate on the doping efficiency of single crystal boron doped diamond, Diamond and Related Materials, vol.49, pp.19-24

M. Kadri, Effect of oxygen on the cathodoluminescence signal from excitons, impurities and structural defects in homoepitaxial (100) diamond films, Diamond and Related Materials, vol.14, pp.566-569, 2005.

P. N. Volpe, High hole mobility in boron doped diamond for power device applications, Applied Physics Letters, vol.94, issue.9, p.92102, 2009.

J. Barjon, Resistivity of boron doped diamond, physica status solidi (RRL)-Rapid Research Letters, vol.3, issue.6, pp.202-204, 2009.

J. Achard, Thick boron doped diamond single crystals for high power electronics, Diam. Relat. Mater, vol.20, pp.145-152, 2011.

R. Issaoui, Growth of thick heavily boron-doped diamond single crystals: effect of microwave power density, Appl. Phys. Lett, p.182101, 2010.

S. Ohmagari, Growth and characterization of freestanding p+diamond (100) substrates prepared by hot-filament chemical vapor deposition, Diamond and Related Materials, vol.81, pp.33-37, 2018.

J. Achard, Freestanding CVD boron doped diamond single crystals: A substrate for vertical power electronic devices?, physica status solidi, pp.1651-1658, 2012.

J. Barjon, Homoepitaxial boron-doped diamond with very low compensation, physica status solidi (a), pp.1750-1753, 2012.

R. Monflier, Diodes Schottky diamant fonctionnant à 200° C, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01245628

V. Mortet, Properties of boron-doped epitaxial diamond layers grown on (110) oriented single crystal substrates, Diamond and Related Materials, vol.53, issue.0, pp.29-34, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01364116

M. Werner, The Relationship between Resistivity and Boron Doping Concentration of Single and Polycrystalline Diamond, Physica Status Solidi (a), vol.154, issue.1, pp.385-393, 1996.

W. S. Williams, E. C. Lightowlers, and A. T. Collins, Impurity conduction in synthetic semiconducting diamond, J. Phys. C: Solid State Phys, vol.3, p.1727, 1970.

T. Klein, Metal-insulator transition and superconductivity in boron-doped diamond, Physical Review B (Condensed Matter and Materials Physics), vol.75, issue.16, pp.165313-165320, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00761435

G. L. Pearson and J. Bardeen, Electrical Properties of Pure Silicon and Silicon Alloys Containing Boron and Phosphorus, Physical Review, vol.75, issue.5, pp.865-883, 1949.

D. C. Look, Electrical Characterization of GaAs Materials and Devices, 1989.

K. Thonke, The boron acceptor in diamond, Semiconductor Science and Technology, vol.18, issue.3, pp.20-26, 2003.

C. Nebel, Transport and defect properties of intrinsic and boron-doped diamond in "Semiconductors and semimetals, 2003.

V. Mortet, Characterization of boron doped diamond epilayers grown in a NIRIM type reactor, Diamond and Related Materials, vol.17, issue.7, pp.1330-1334, 2008.

H. Mathieu, Physique des semiconducteurs et des composants électroniques, 2001.

J. E. Butler, Exceptionally high voltage Schottky diamond diodes and low boron doping, Semiconductor Science and Technology, vol.18, issue.3, pp.67-71, 2003.

P. N. Volpe, Extreme dielectric strength in boron doped homoepitaxial diamond, Applied Physics Letters, vol.97, issue.22, p.223501, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00734714

Y. Chen, Diamond Schottky barrier diodes with low specific on-resistance, Semicond. Sci. Technol, vol.20, pp.1203-1206, 2005.

H. Umezawa, Y. Kato, and S. Shikata, 1 ? On-Resistance Diamond Vertical-Schottky Barrier Diode Operated at 250 °C, Applied Physics Express, vol.6, p.11302, 2013.

A. Traoré, Zr/oxidized diamond interface for high power Schottky diodes, Applied Physics Letters, vol.104, issue.5, p.p, 2014.

S. Koné, An assessment of contact metallization for high power and high temperature diamond Schottky devices, Diamond and Related Materials, pp.23-28, 2012.

J. C. Pinero, Metal-oxide-diamond interface investigation by TEM: Toward MOS and Schottky power device behavior, Physica Status Solidi a-Applications and Materials Science, vol.211, issue.10, pp.2367-2371, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01379124

D. Eon, Recent progress on diamond Schottky diode, Proceeding of the 28th International Symposium on Power Semiconductor Devices and ICs (ISPSD) 2016, p.16177969

A. Traoré, High power diamond Schottky diode, 2014.

P. Muret, Potential barrier heights at metal on oxygen-terminated diamond interfaces, Journal of Applied Physics, vol.118, issue.20, p.204505, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01104188

H. Umezawa, . S.-i, T. Shikata, and . Funaki, Diamond Schottky barrier diode for hightemperature, high-power, and fast switching applications, Japanese Journal of Applied Physics, vol.53, issue.5S1, pp.5-06, 2014.

T. Makino, Diamond electronic devices fabricated using heavily doped hopping p + and n + layers, Japanese Journal of Applied Physics, vol.53, issue.5S1, pp.5-12, 2014.

A. T. Collins, E. C. Lightowlers, and A. W. Williams, Formation of electrical contacts on insulating and semiconducting diamonds, Diamond Res. (Suppl. Indust. Diamond Rev, pp.19-22, 1970.

T. Tachibana, B. E. Williams, and J. T. Glass, Correlation of the electrical properties of metal contacts on diamond films with the chemical nature of the metal-diamond interface. I. Gold contacts: A non-carbide-forming metal, Physical Review B, vol.45, issue.20, pp.11968-11974, 1992.

T. Tachibana and T. Glass, Effects of argon presputtering on the formation of aluminum contacts on polycrystalline diamond, J. Appl. Phys, vol.72, issue.12, p.5912, 1992.

T. Tachibana, B. E. Williams, and J. T. Glass, Correlation of the electrical properties of metal contacts on diamond films with the chemical nature of the metal-diamond interface. II. Titanium contacts: A carbide-forming metal, Physical Review B, vol.45, issue.20, pp.11975-11981, 1992.

M. W. Geis, Electrical, crystallographic, and optical properties of ArF laser modified diamond surfaces, Appl. Phys. Lett, vol.55, issue.22, p.2295, 1989.

T. Tachibana, T. Glass, and D. G. Thompson, Titanium carbide rectifying contacts on borondoped polycrystalline diamond, Diam. and Rel. Mater, vol.2, p.37, 1993.

T. Tachibana, I. T. Glass, and R. I. Nemanich, Effect of surface hydrogen on metaldiamond interface properties, J. Appl. Phys, vol.73, issue.2, p.835, 1993.

T. Tachibana and J. T. Glass, Correlation of interface chemistry to electrical properties of metal contacts on diamond, Diam. and Rel. Mater, vol.2, p.963, 1993.

G. S. Gildenblat, High temperature Schottky diodes with thin-film diamond base IEEE Electron Device IEEE Electron Device Lett, vol.11, p.371, 1990.

K. L. Moazed, J. R. Zeidler, and M. J. Taylor, A thermally activated solid state reaction process for fabricating ohmic contacts to semiconducting diamond, Appl. Phys, vol.68, issue.5, p.2246, 1990.

H. Shiomi, Electrical characteristics of metal contacts to boron-doped diamond epitaxial film, Jpn. J. Appl. Phys, vol.28, issue.5, p.758, 1989.

K. L. Moazed, R. Nguyen, and J. R. Zeidler, Ohmic contacts to semiconducting diamond, IEEE Electron Device Lett, vol.9, issue.7, p.350, 1988.

B. B. Pate, J. Vac. Sci. Technol, vol.21, p.364, 1982.

T. Teraji, S. Koizumi, and Y. Koide, Ohmic contact for p-type diamond without postannealing, Journal of Applied Physics, vol.104, issue.1, p.16104, 2008.

P. Volpe, High breakdown voltage Schottky diodes synthesized on p-type CVD diamond layer, physica status solidi (a), pp.2088-2092, 2010.

T. Teraji, Low-leakage p-type diamond Schottky diodes prepared using vacuum ultraviolet light/ozone treatment, Journal of Applied Physics, vol.105, issue.12, p.126109, 2009.

S. Kono, Sheet resistance underneath the Au ohmic-electrode on hydrogen-terminated surface-conductive diamond (001), Diamond and Related Materials, vol.80, pp.93-98

S. Koizumi, C. Nebel, and M. Nesladek, Physics and Applications of CVD Diamond, 2008.

G. Lindström, Radiation hard silicon detectors-developments by the RD48 (ROSE) collaboration, Nuclear Instruments and Methods in, Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol.466, issue.2, pp.308-326, 2001.

W. Adam, Pulse height distribution and radiation tolerance of CVD diamond detectors, Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol.447, issue.1, pp.244-250, 2000.
URL : https://hal.archives-ouvertes.fr/in2p3-00012183

W. Adam, Radiation hard diamond sensors for future tracking applications, Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol.565, issue.1, pp.278-283, 2006.

M. Marinelli, Trapping and detrapping effects in high-quality chemical-vapordeposition diamond films: Pulse shape analysis of diamond particle detectors, Physical Review B, vol.64, p.195205, 2001.

M. A. Plano, Thickness dependence of the electrical characteristics of chemical vapor deposited diamond films, Applied Physics Letters, vol.64, issue.2, pp.193-195, 1994.

W. Adam, Status of the R&D activity on diamond particle detectors, Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol.511, issue.1-2, pp.124-131, 2003.
URL : https://hal.archives-ouvertes.fr/in2p3-00022289

M. Bruinsma, CVD Diamonds in the BaBar Radiation Monitoring System, Nuclear Physics B-Proceedings Supplements, vol.150, pp.164-167, 2006.

H. Pernegger, Design and test of a high-speed single-particle beam monitor, Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol.535, issue.1, pp.108-114, 2004.

D. Chong, Validation of Synthetic Diamond for a Beam Condition Monitor for the Compact Muon Solenoid Experiment, IEEE Transactions on Nuclear Science, vol.54, issue.1, pp.182-185, 2007.

F. Bachmair, Diamond sensors for future high energy experiments, Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol.831, pp.370-377

D. Lattanzi, Single crystal CVD diamonds as neutron detectors at JET, Fusion Engineering and Design, vol.84, issue.7, pp.1156-1159, 2009.

G. J. Schmid, CVD diamond as a high bandwidth neutron detector for inertial confinement fusion diagnostics, Review of Scientific Instruments, vol.74, issue.3, pp.1828-1831, 2003.

M. Angelone, Radiation hardness of a polycrystalline chemical-vapor-deposited diamond detector irradiated with 14 MeV neutrons, Review of Scientific Instruments, vol.77, issue.2, p.23505, 2006.

S. Almaviva, Thermal and fast neutron detection in chemical vapor deposition singlecrystal diamond detectors, Journal of Applied Physics, vol.103, issue.5, p.54501, 2008.

P. Lardon, Investigations of high quality diamond detectors for neutron fluency monitoring in a nuclear reactor, Diamond and Related Materials, vol.15, pp.815-821, 2006.

J. Pietraszko, Diamonds as timing detectors for minimum-ionizing particles: The HADES proton-beam monitor and START signal detectors for time of flight measurements, Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol.618, issue.1, pp.121-123, 2010.

M. Berretti, The diamond time of flight detector of the TOTEM experiment, Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol.845, pp.29-32

M. Nesladek, Conventional n-type doping in diamond: state of the art and recent progress, Semiconductor Science and Technology, vol.20, issue.2, p.19, 2005.

M. Girolami, Large single-crystal diamond substrates for ionizing radiation detection, physica status solidi (a), pp.2634-2640, 2016.

W. Adam, Review of the development of diamond radiation sensors, Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol.434, issue.1, pp.131-145, 1999.
URL : https://hal.archives-ouvertes.fr/in2p3-00012134

C. M. , Development of a synthetic single crystal diamond dosimeter for dose measurement of clinical proton beams, Physics in Medicine & Biology, vol.62, issue.13, p.5417, 2017.

M. L. Gallin-martel, Large area polycrystalline diamond detectors for online hadron therapy beam tagging applications, Proceeding of the 2016 IEEE Nuclear Science Symposium, Medical Imaging Conference and Room-Temperature Semiconductor Detector Workshop, pp.1-5
URL : https://hal.archives-ouvertes.fr/in2p3-01417258

M. Pomorski, Characterization of the charge-carrier transport properties of IIa-Tech SC diamond for radiation detection applications, physica status solidi (a), 2015.

F. Bachmair and . Diamond, Sensors In Detectors For High Energy Physics, 2016.

W. Adam, The first bump-bonded pixel detectors on CVD diamond, Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol.436, issue.3, pp.326-335, 1999.
URL : https://hal.archives-ouvertes.fr/in2p3-00012128

A. Bartoli, Dosimetric characterization of a 2D polycrystalline CVD diamond detector, Journal of Instrumentation, vol.12, issue.03, p.3052, 2017.

S. I. Parker, C. J. Kenney, and J. Segal, 3D-A proposed new architecture for solid-state radiation detectors, Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol.395, issue.3, pp.328-343, 1997.

C. D. Vià, 3D Active Edge Silicon Detector Tests With 120 GeV Muons, IEEE Transactions on Nuclear Science, vol.56, issue.2, pp.505-518, 2009.

T. V. Kononenko, Microstructuring of diamond bulk by IR femtosecond laser pulses, Appl. Phys. A, issue.90, p.645, 2008.

M. Artuso, A 3D diamond detector for particle tracking, Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol.824, pp.402-405, 2016.
URL : https://hal.archives-ouvertes.fr/in2p3-01322643

N. Venturi, Diamond Pixel Detectors and 3D Diamond Devices, Journal of Instrumentation, vol.11, issue.12, p.12062, 2016.

H. Kagan, Diamond detector technology: status and perspectives, Proceeding of the 25th International Workshop on Vertex Detectors (VERTEX 2016), p.27
URL : https://hal.archives-ouvertes.fr/cea-02060804

K. Liu, Single crystal diamond UV detector with a groove-shaped electrode structure and enhanced sensitivity, Sensors and Actuators A: Physical, pp.121-126, 2017.

C. Z. Wang, Laser-Induced Graphitization on a Diamond (111) Surface, Physical Review Letters, vol.85, pp.4092-4095, 2000.

L. Nistor, Formation of Amorphous Carbon and Graphite in CVD Diamond upon Annealing: A HREM, EELS, Raman and Optical Study, physica status solidi (a), vol.186, pp.207-214, 2001.

V. V. Kononenko, Laser-induced structure transformations of diamonds, Proceeding of the Laser Processing of Advanced Materials and Laser Microtechnologies, SPIE, vol.5121, pp.259-270, 2003.

T. V. Kononenko, Ablation of CVD diamond with nanosecond laser pulses of UV-IR range1Presented at the Diamond '97 Conference, vol.7, pp.1623-1627, 1997.

M. S. Komlenok, Laser microstructuring of the surface of ta-C films, Nano/Microsystem Technology, vol.3, pp.48-53, 2008.

S. S. Chan, The effect of excimer laser etching on thin film diamond, Semicond. Sci. Technol, vol.18, pp.47-58, 2003.

V. V. Kononenko, Photoinduced laser etching of a diamond surface, Quantum Electronics, vol.37, issue.11, pp.1043-1046, 2007.
DOI : 10.1070/qe2007v037n11abeh013515

A. Taurino, Graphitization of Diamond by Means of UV Laser Writing: A Transmission Electron Microscopy Study, Microscopy and Microanalysis, vol.23, issue.S1, pp.2262-2263, 2017.

A. T. Collins, The Physics of diamond, 1997.

D. Feudis and M. , Realizzazione e caratterizzazione di contatti grafitici su diamante mediante laser, 2014.

D. Feudis and M. , Realization and characterization of graphitic contacts on diamond by means of laser, Proceeding of the IV National Workshop on Plasmi Sorgenti Biofisica e Applicazioni (PSBA), 2014.

D. Feudis and M. , Characterization of surface graphitic electrodes made by excimer laser on CVD diamond, Diamond and Related Materials, vol.65, pp.137-143

D. Feudis and M. , Diamond detectors with electrodes graphitized by means of laser, Proceeding of the Conference Incontri di Fisica delle Alte Energie (IFAE) 2015, p.254

T. V. Kononenko, Femtosecond laser microstructuring in the bulk of diamond, Diamond and Related Materials, vol.18, issue.2, pp.196-199, 2009.

M. Pacilli, Beta particles sensitivity of an all-carbon detector, Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol.738, pp.119-125, 2014.
DOI : 10.1016/j.nima.2013.12.022

M. Komlenok, Diamond detectors with laser induced surface graphite electrodes, Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol.837, pp.136-142, 2016.
DOI : 10.1016/j.nima.2016.09.019

S. Salvatori, Nano-carbon pixels array for ionizing particles monitoring, Diamond and Related Materials, vol.73, pp.132-136, 2017.
DOI : 10.1016/j.diamond.2016.08.011

T. Kononenko, All-carbon detector with buried graphite pillars in CVD diamond, Appl. Phys. A, vol.114, pp.297-300, 2014.
DOI : 10.1007/s00339-013-8091-7

S. Su, Femtosecond laser-induced microstructures on diamond for microfluidic sensing device applications, Applied Physics Letters, vol.102, issue.23, p.231913, 2013.
DOI : 10.1063/1.4811170

URL : https://publications.aston.ac.uk/id/eprint/25900/1/Femtosecond_laser_induced_microstructures_on_diamond_for_microfluidic_sensing.pdf

M. Girolami, Graphite distributed electrodes for diamond-based photon-enhanced thermionic emission solar cells, Carbon, vol.111, pp.48-53, 2017.
DOI : 10.1016/j.carbon.2016.09.061

J. O. Orwa, Raman investigation of damage caused by deep ion implantation in diamond, Physical Review B, vol.62, issue.9, pp.5461-5472, 2000.

R. Kalish, Ion-Implantation-Induced Defects in Diamond and Their Annealing: Experiment and Simulation, Physica status solidi (a) 174 (83) 1999, pp.83-99
DOI : 10.1002/(sici)1521-396x(199907)174:1<83::aid-pssa83>3.0.co;2-3

R. Kalish and S. Prawer, Graphitization of diamond by ion impact: Fundamentals and applications, Nuclear Instruments & Methods in Physics Research B, vol.106, pp.492-499, 1995.

A. A. Gippius, Defect-induced graphitisation in diamond implanted with ligth ions, Physica B 308-310, pp.573-576, 2001.
DOI : 10.1016/s0921-4526(01)00738-4

P. Olivero, Characterization of three-dimensional microstructures in single-crystal diamond, Diamond and Related Materials, vol.15, issue.10, pp.1614-1621, 2006.

J. D. Hunn, Raman scattering from MeV-ion implanted diamond, Physical Review B, vol.52, issue.11, p.8106, 1995.

M. S. Dresselhaus, R. Kalish, and . Gonser, Ion Implantation in Diamond, Graphite and Related Materials, 1992.

J. F. Ziegler, M. D. Ziegler, and J. P. Biersack, Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, vol.268, pp.1818-1823, 2010.

Y. G. Chen, Electrical properties of graphite/homoepitaxial diamond contact, Diamond and Related Materials, vol.11, issue.3, pp.451-457, 2002.

J. C. Piñero, Impact of Thermal Treatments in Crystalline Reconstruction and Electrical Properties of Diamond Ohmic Contacts Created by Boron Ion Implantation, physica status solidi (a), vol.214, p.184, 2017.

A. P. Bolshakov, Thin CVD diamond film detector for slow neutrons with buried graphitic electrode, Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol.871, pp.142-147, 2017.

T. Matsumoto, Reduction of n-type diamond contact resistance by graphite electrode, physica status solidi (RRL)-Rapid Research Letters, vol.8, pp.137-140, 2014.

Y. Mokuno, A. Chayahara, and H. Yamada, Synthesis of large single crystal diamond plates by high rate homoepitaxial growth using microwave plasma CVD and lift-off process, Diamond and Related Materials, vol.17, pp.415-418, 2008.

C. M. Welbourn, M. Cooper, and P. M. Spear, De Beers Natural versus Synthetic Diamond Verification Instruments, Gems & Gemology, vol.32, issue.3, pp.156-169, 1996.

M. Naamoun, Etch-pit formation mechanism induced on HPHT and CVD diamond single crystals by H2/O2 plasma etching treatment, physica status solidi (a), pp.1715-1720, 2012.

A. Tallaire, Oxygen plasma pre-treatments for high quality homoepitaxial CVD diamond deposition, physica status solidi (a), vol.201, pp.2419-2424, 2004.

A. Tallaire, Croissance de monocristaux de diamant par dépôt chimique en phase vapeur pour des applications en électronique de puissance, vol.13, 2005.

K. Hassouni, Modeling Species and Energy Transport in Moderate Pressure Diamond Deposition H 2 Plasmas, J. Phys. III France, vol.6, pp.1229-1243, 1996.
URL : https://hal.archives-ouvertes.fr/jpa-00249521

A. Gicquel, Diamond deposition in a bell-jar reactor: influence of the plasma and substrate parameters on the microstructure and growth rate, Diamond and Related Materials, vol.2, issue.2-4, pp.417-424, 1993.

F. Silva, Microwave engineering of plasma-assisted CVD reactors for diamond deposition, Journal of Physics: Condensed Matter, vol.21, issue.36, p.364202, 2009.

F. Silva, Microwave analysis of PACVD diamond deposition reactor based on electromagnetic modelling, Diamond and Related Materials, vol.19, issue.5-6, pp.397-403, 2010.

R. Issaoui, Evaluation of freestanding boron-doped diamond grown by chemical vapour deposition as substrates for vertical power electronic devices, Applied Physics Letters, vol.100, issue.12, p.122109, 2012.

F. Bosia, Modification of the structure of diamond with MeV ion implantation, Diamond and Related Materials, vol.20, issue.5, pp.774-778, 2011.

B. Chase, Fourier transform Raman spectroscopy, Analytical Chemistry, vol.59, pp.881-890, 1987.

H. Ohfuji, Micro-/nanostructural investigation of laser-cut surfaces of single-and polycrystalline diamonds, Diamond and Related Materials, vol.19, issue.7, pp.1040-1051, 2010.

T. V. Kononenko, A. A. Khomich, and V. I. Konov, Peculiarities of laser-induced material transformation inside diamond bulk, Diamond and Related Materials, vol.37, pp.50-54, 2013.

E. Gheeraert, Effect of boron incorporation on the "quality" of MPCVD diamond films, Diamond and Related Materials, vol.2, pp.742-745, 1993.

I. W. Ager, Fano interference of the Raman phonon in heavily borondoped diamond films grown by chemical vapor deposition, Applied Physics Letters, vol.66, issue.5, pp.616-618, 1995.

F. Pruvost, E. Bustarret, and A. Deneuville, Characteristics of homoepitaxial heavily borondoped diamond films from their Raman spectra, Diamond and Related Materials, vol.9, issue.3, pp.295-299, 2000.

A. M. Zaitsev, Optical Properties of Diamond: A Data Handbook, 2001.

M. Huang, Mechanisms of ultrafast laser-induced deep-subwavelength gratings on graphite and diamond, Physical Review B, vol.79, issue.12, p.125436, 2009.

S. Ghodbane, F. Omnès, and C. Agnès, A cathodoluminescence study of boron doped {111}homoepitaxial diamond films, Diamond and Related Materials, vol.19, issue.4, pp.273-278, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00739731

C. Baron, Excitonic recombinations and energy levels of highly boron doped homoepitaxial diamond films before and after hydrogenation, Diamond and Related Materials, vol.14, pp.350-354, 2005.

J. Barjon, Cathodoluminescence as a tool to determine the phosphorus concentration in diamond, physica status solidi (a), vol.204, pp.2965-2970, 2007.

C. Baron, Cathodoluminescence of highly and heavily boron doped (100) homoepitaxial diamond films, Diamond and Related Materials, vol.15, pp.597-601, 2006.

K. Haenen, P-doped diamond grown on (110)-textured microcrystalline diamond: growth, characterization and devices, Journal of Physics: Condensed Matter, p.364204, 2009.

A. Tallaire, Dislocations and impurities introduced from etch-pits at the epitaxial growth resumption of diamond, Diamond and Related Materials, pp.875-881, 2011.

M. O. Ali, Elementary Solid State Physics, 1975.

M. Kasu, Influence of epitaxy on the surface conduction of diamond film, Diamond and Related Materials, vol.13, issue.2, pp.226-232, 2004.

W. C. Oliver and G. M. Pharr, Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology, Journal of Materials Research, vol.19, issue.1, pp.3-20, 2004.

G. K. Reeves and H. B. Harrison, Obtaining the specific contact resistance from transmission line model measurements, IEEE Electron Device Letters, vol.3, issue.5, pp.111-113, 1982.

D. K. Schroder, Semiconductor Material and Device Characterization, 2006.

L. B. Valdes, Resistivity Measurements on Germanium for Transistors, Proceeding of IRE 42 (2) 1954, pp.420-427

T. V. Kononenko, Microstructuring of diamond bulk by IR femtosecond laser pulses, Applied Physics A, vol.90, issue.4, pp.645-651, 2008.

S. P. Martin and . Supersymmetryprimer, , 2016.

G. Bertone, The moment of truth for WIMP dark matter, Nature, vol.468, p.389, 2010.

J. Alexandere, Dark Sectors 2016 Workshop: Community Report, 2016.

P. Fayet, U(1)A symmetry in two-doublet models, U bosons or light scalars, and ? and ? decays, Physics Letters B, vol.675, issue.2, pp.267-271, 2009.

M. Raggi and V. Kozhuharov, Results and perspectives in dark photon physics, Rivista del nuovo cimento, vol.38, issue.10, p.2015

V. Kozhuharov, M. Raggi, and P. Valente, New Projects on Dark Photon Search, 2016.

G. Chiodini, The PADME experiment for dark mediator searches at the Frascati BTF, Journal of Instrumentation, vol.12, issue.02, p.2037, 2017.

C. Patrignani and G. P. Data, Review of Particle Physics, Chinese Physics C, vol.40, issue.10, p.100001, 2016.

W. Adam, Status of the R&D activity on diamond particle detectors, Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol.511, issue.1, pp.124-131, 2003.
URL : https://hal.archives-ouvertes.fr/in2p3-00022289

P. Valente, Linear Accelerator Test Facility at LNF Conceptual Design Report, 2016.

D. Feudis and M. , Diamond graphitization by laser-writing for all-carbon detector applications, Diamond and Related Materials, vol.75, pp.25-33

A. C. Ferrari and D. M. Basko, Raman spectroscopy as a versatile tool for studying the properties of graphene, Nature Nanotechnology, p.235, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00844853

I. P?csik, J. Non-Cryst. Solids, vol.227, pp.1083-1086, 1998.

C. Castiglioni, Raman activation in disordered graphites of the A1? symmetry forbidden k?0 phonon: The origin of the D line, The Journal of Chemical Physics, vol.115, issue.8, pp.3769-3778, 2001.

C. Castiglioni, M. Tommasini, and G. Zerbi, Raman spectroscopy of polyconjugated molecules and materials: confinement effect in one and two dimensions, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences, vol.362, pp.2425-2459, 1824.

R. R. Nair, Fine structure constant defines visual transparency of graphene, Science, vol.320, p.1308, 2008.

A. Richter, Nanoindentation of diamond, graphite and fullerene films, Diamond and Related Materials, vol.9, issue.2, pp.170-184, 2000.

B. Sun, P. S. Salter, and M. J. Booth, High conductivity micro-wires in diamond following arbitrary paths, Applied Physics Letters, vol.105, issue.23, p.p, 2014.

S. Lagomarsino, Electrical and Raman-imaging characterization of laser-made electrodes for 3D diamond detectors, Diamond and Related Materials, vol.43, pp.23-28, 2014.

G. Parrini, Laser graphitization for polarization of diamond sensors, Proceeding of the 10th International Conference on Large Scale Applications and Radiation Hardness of Semiconductor Detectors

R. Assiro, Performance of the diamond active target prototype for the PADME experiment at the DA?NE BTF, 2017.

M. Raggi, Performance of the PADME Calorimeter prototype at the DA?NE BTF, Nuclear Instruments and Methods in, Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, vol.862, pp.31-35, 2017.

F. Oliva, Sviluppo e caratterizzazione del bersaglio attivo dell'esperimento PADME, 2016.

E. Leonardi, M. Raggi, and P. Valente, Development and test of a DRS4-based DAQ system for the PADME experiment at the DA?NE BTF, J. Phys.: Conf. Ser, vol.898, p.32024, 2017.

G. Chiodini, A diamond active target for the PADME experiment, Journal of Instrumentation, vol.12, issue.02, p.2036, 2017.

F. Oliva, Bersaglio attivo in diamante per l'esperimento PADME, Proceeding of the V National Workshop on Plasmi Sorgenti Biofisica e Applicazioni (PSBA) 2016, 2015.

F. Oliva, Beam test results of PADME full carbon active diamond target, Proceeding of the Conference Incontri di Fisica delle Alte Energie (IFAE) 2016, vol.40, p.81

L. G. Foggetta, B. Buonomo, and P. Valente, Beam Optimization of the DAFNE Beam Test Facility, Proceeding of the 6th International Particle Accelerator Conference (IPAC) 2015

R. Issaoui, Influence of oxygen addition on the crystal shape of CVD boron doped diamond, physica status solidi (a), vol.208, pp.2023-2027, 2011.

F. Omnès, Study of boron doping in MPCVD grown homoepitaxial diamond layers based on cathodoluminescence spectroscopy, secondary ion mass spectroscopy and capacitance-voltage measurements, Diamond and Related Materials, vol.20, issue.7, pp.912-916, 2011.

A. Tallaire, Growth of thick and heavily boron-doped (113)-oriented CVD diamond films, Diamond and Related Materials, pp.61-66, 2016.

J. Barjon, Boron acceptor concentration in diamond from excitonic recombination intensities, Physical Review B, vol.83, issue.7, p.73201, 2011.

S. B. Iyer, Vibronic model for band A emission in diamond, Physical Review B, vol.55, issue.7, p.4093, 1997.

A. Tallaire, Identification of Dislocations in Synthetic Chemically Vapor Deposited Diamond Single Crystals, Crystal Growth & Design, vol.16, pp.2741-2746, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01456077

G. H. Kinchin and R. S. Pease, The Displacement of Atoms in Solids by Radiation, Reports on Progress in Physics, vol.18, issue.1, p.1, 1955.

V. S. Drumm, Surface damage on diamond membranes fabricated by ion implantation and lift-off, Applied Physics Letters, vol.98, issue.23, p.231904, 2011.

G. R. Brandes, Ion implantation and anneal to produce low resistance metal-diamond contacts, Diamond and Related Materials, vol.8, issue.10, pp.1936-1943, 1999.

J. Enlund, Anisotropic dry etching of boron doped single crystal CVD diamond, Carbon, vol.43, issue.9, pp.1839-1842, 2005.