A. , NF EN 350-2, Durabilité du bois et des matériaux dérivés du bois-Durabilité naturelle du bois massif-Partie 2 : Guide de la durabilité naturelle du bois et de l´imprégnabilité d´essences de bois choisies pour leur importance en Europe, 1994.

A. , NF EN 599-1 Durabilité du bois et des matériaux dérivés du boisPerformances des produits préventifs de préservation du bois établies par des essais biologiques-Partie 1 : Spécifications par classe d'emploi, 1996.

A. , NF EN 13183-1, Teneur en humidité d'une pièce de bois scié-Partie 1 : détermination par la méthode par dessiccation, 2002.

A. , NF EN 13183-2, Teneur en humidité d'une pièce de bois scié-Partie 2 : estimation par méthode électrique par résistance, 2002.

A. , NF EN 13183-3, Teneur en humidité d'une pièce de bois scié-Partie 3 : estimation par méthode capacitive, 2005.

A. , NF EN 14080, Structures en bois-Bois lamellé collé et bois massif reconstitué-Exigences, 2013.

S. Ahadian, J. Ramón-azcón, and S. Ostrovidov, Interdigitated array of Pt electrodes for electrical stimulation and engineering of aligned muscle tissue, Lab Chip, vol.12, pp.3491-3503, 2012.

W. Ai, Glissement moléculaire dans les matériaux lignocellulosiques : mesures de perméabilité apparente et identification de paramètres morphologiques, vol.144, p.p, 2016.

R. Albero, D. Aléon, A. Decker, and S. , , 2013.

G. Almeida, Influence de la structure du bois sur ses propriétés physico-mécaniques à des teneurs en humidité élevées, vol.232, 2006.

D. Ashby, Electrical Engineering 101-Everything You Should Have Learned in School, but Probably Didn't. Third Edition, 2012.

, Auvergne Promobois (2012) Guide pour construire avec le bois. Guide de l'Auvergne Promobois

D. Balageas, C. Fritzen, and A. Güemes, Structural Health Monitoring. ISTE, 2006.

M. Barbezat, A. J. Brunner, and P. Flüeler, Acoustic emission sensor properties of active fibre composite elements compared with commercial acoustic emission sensors, Sens Actuators Phys, vol.114, pp.13-20, 2004.

M. Barbezat, A. J. Brunner, C. Huber, and P. Flüeler, Integrated active fiber composite elements: characterization for acoustic emission and acousto-ultrasonics, J Intell Mater Syst Struct, pp.515-525, 2007.

V. Barbier and J. Joineau, Panorama de 15 ouvrages d'art en bois français. Guide du CETE de l, 2006.

V. Barbier, Développement durable et utilisation du bois dans les ponts, 2007.

A. Beauger, J. Haussonne, and J. Niépce, Condensateurs. Techniques de l'ingénieur, p.1925, 2007.

A. Behnia, H. K. Chai, and T. Shiotani, Advanced structural health monitoring of concrete structures with the aid of acoustic emission, Constr Build Mater, vol.65, pp.282-302, 2014.

A. A. Bent and N. W. Hagood, Piezoelectric Fiber Composites with Interdigitated Electrodes, J Intell Mater Syst Struct, vol.8, pp.903-919, 1997.

K. Bergmeister and U. Santa, Structural Health Monitoring of Concrete Bridges, Jacquot PDP, Fournier DJ-M Interferometry in Speckle Light, pp.633-640, 2000.

J. Biger, Pathologie des structures en bois. Techniques de l'ingénieur, 1997.

N. Björngrim, Monitoring of a Timber Footbridge, vol.75, 2015.

N. Bjorngrim, O. Hagman, and X. Wang, Moisture Content Monitoring of a Timber Footbridge, Bioresources, vol.11, pp.3904-3913, 2016.

N. Björngrim, P. Fjellström, and O. Hagman, Resistance Measurements to Find High Moisture Content Inclusions Adapted for Large Timber Bridge Cross-Sections, BioResources, vol.12, pp.3570-3582, 2017.

I. Böhnke, Etude expérimentale et théorique des traitements thermiques du bois. Caractérisation physico-mécanique des bois traités, vol.312, 1993.

L. Brancheriau, Caractérisation acoustique et ultrasonore des produits bois et composites, vol.122, 2013.

D. Breysse, Non-Destructive Assessment of Concrete Structures: Reliability and Limits of Single and Combined Techniques, 2012.

C. Brischke, R. Bayerbach, and A. O. Rapp, Decay-influencing factors: A basis for service life prediction of wood and wood-based products, Wood Mater Sci Eng, vol.1, pp.91-107, 2006.

C. Brischke, A. O. Rapp, and R. Bayerbach, Measurement system for long-term recording of wood moisture content with internal conductively glued electrodes, Build Environ, vol.43, pp.1566-1574, 2008.

C. Brischke and A. O. Rapp, Influence of wood moisture content and wood temperature on fungal decay in the field: observations in different micro-climates, Wood Sci Technol, vol.42, pp.663-677, 2008.

C. Brischke, A. O. Rapp, and R. Bayerbach, Monitoring the "material climate" of wood to predict the potential for decay: Results from in situ measurements on buildings, Build Environ, vol.43, pp.1575-1582, 2008.

C. Brischke and A. O. Rapp, Service life prediction of wooden components-Part 1: Determination of dose-response functions for above ground decay, The International Research Group on Wood Protection, pp.10-20439, 2010.

C. Brischke, C. J. Behnen, and M. Lenz, Durability of oak timber bridges-Impact of inherent wood resistance and environmental conditions, Int Biodeterior Biodegrad, vol.75, pp.115-123, 2012.

C. Brischke, L. Meyer, and T. Bornemann, Service life of timber components: prognosis based on 3 years high-frequency monitoring, Eur J Wood Wood Prod, vol.71, pp.79-90, 2013.

C. Brischke, L. Meyer, and T. Bornemann, The potential of moisture content measurements for testing the durability of timber products, Wood Sci Technol, vol.47, pp.869-886, 2013.

C. Brischke and S. Thelandersson, Modelling the outdoor performance of wood productsA review on existing approaches, Constr Build Mater, vol.66, pp.384-397, 2014.

C. Brischke and S. C. Lampen, Resistance based moisture content measurements on native, modified and preservative treated wood, Eur J Wood Wood Prod, vol.72, pp.289-292, 2014.

C. Brischke, L. Meyer-veltrup, and T. Bornemann, Moisture performance and durability of wooden façades and decking during six years of outdoor exposure, J Build Eng, vol.13, pp.207-215, 2017.

J. Broomfield and S. Millard, Measuring concrete resistivity to assess corrosion rates, Concrete, vol.36, pp.37-39, 2002.

A. J. Brunner, M. Barbezat, P. Flüeler, and C. Huber, Composites from piezoelectric fibers as sensors and emitters for acoustic applications, J Acoust Emiss, vol.22, pp.127-137, 2004.

A. J. Brunner, M. Barbezat, C. Huber, and P. H. Flüeler, The potential of active fiber composites made from piezoelectric fibers for actuating and sensing applications in structural health monitoring, Mater Struct, vol.38, pp.561-567, 2005.

V. Bucur, Nondestructive characterization and imaging of wood, 2003.

V. Bucur, Acoustics of wood, 2006.

J. H. Bungey, M. G. Grantham, and S. Millard, Testing of Concrete in Structures, 2006.

H. K. Burr and A. J. Stamm, Diffusion in Wood, J Phys Colloid Chem, vol.51, pp.240-261, 1947.

J. Cai, L. Qiu, and S. Yuan, Structural Health Monitoring for Composite Materials, Composites and Their Applications, 2012.

L. Calegari, D. A. Gatto, and D. M. Stangerlin, Influence of moisture content, specific gravity and specimen geometry on the ultrasonic pulse velocity in Eucalyptus grandis hill ex Maiden wood, Rev Ciênc Madeira Braz J Wood Sci, vol.2, pp.64-74, 2011.

L. Candanedo and D. Derome, Numerical simulation of water absorption in softwood, Proceedings of the 9th International IBPSA Conference, pp.15-18, 2005.

C. Caneva, D. Rosa, I. M. Sarasini, and F. , Damage mechanisms in loaded aramid composites by means of embedded PVDF acoustic emission sensors, Adv Mater Res, vol.13, pp.337-342, 2006.

C. Caneva, D. Rosa, I. M. Sarasini, and F. , Monitoring of Impacted Aramid-Reinforced Composites by Embedded PVDF Acoustic Emission Sensors, Strain, vol.44, pp.308-316, 2008.

. Cecobois, Guide de bonnes pratiques pour la construction commerciale en gros bois d'oeuvre ou d'ingénierie. Guide du CECOBois (Centre d'expertise sur la construction commerciale en bois), 2ème édition, 2012.

J. Cheeke, Fundamentals and applications of ultrasonic waves, 2012.

M. Cherfaoui, Essais non destructifs. Techniques de l'ingénieur, vol.6450, 2006.

H. Cho and M. Takemoto, Film-type PZT sensors as AE sensors and active guided wave transducers, pp.22-27, 2007.

G. Dai and A. K. , Long-term monitoring of timber moisture content below the fiber saturation point using wood resistance sensors, For Prod J, vol.51, pp.52-58, 2001.

D. 'ayala, D. Branco, J. M. Riggio, and M. , Assessment, reinforcement and monitoring of timber structures: FPS Cost Action FP1101, pp.1-12, 2014.

D. Oliveira, F. Candian, M. Lucchette, and F. F. , A technical note on the relationship between ultrasonic velocity and moisture content of Brazilian hardwood (Goupia glabra), Build Environ, vol.40, pp.297-300, 2005.

D. Rosa, I. M. Sarasini, and F. , Use of PVDF as acoustic emission sensor for in situ monitoring of mechanical behaviour of glass/epoxy laminates, Polym Test, vol.29, pp.749-758, 2010.

X. Dérobert and J. Iaquinta, Capacitive Methods for Structural Health Monitoring in Civil Engineering, Structural Health Monitoring. ISTE, pp.463-490, 2006.

C. T. Dervos and J. M. Michaelides, The effect of contact capacitance on current-voltage characteristics of stationary metal contacts, IEEE Trans Compon Packag Manuf Technol Part A, vol.21, pp.530-540, 1998.

D. Scalea, F. L. Matt, H. Bartoli, and I. , Health Monitoring of UAV Wing Skin-to-spar Joints using Guided Waves and Macro Fiber Composite Transducers, J Intell Mater Syst Struct, vol.18, pp.373-388, 2007.

P. Dietsch, S. Franke, and B. Franke, Methods to determine wood moisture content and their applicability in monitoring concepts, J Civ Struct Health Monit, vol.5, pp.115-127, 2014.

P. Dietsch, A. Gamper, M. Merk, and S. Winter, Monitoring building climate and timber moisture gradient in large-span timber structures, J Civ Struct Health Monit, vol.5, pp.153-165, 2014.

D. Dirol and X. Deglise, Durabilité des bois et problèmes associés, Hermes science publications, 2001.

G. Doignon, Passerelle sur le Sichon à Vichy-Compte rendu d'inspection détaillée du 6 Mai, Opération de recherche LCPC 11N065 sujet 3: Pathologie, diagnostic et réparation des ouvrages en bois, 2009.

G. Doignon, Passerelle Avenue Voltaire à Thiers-Compte rendu d'inspection détaillée du 5 Mai, Opération de recherche LCPC 11N065 sujet 3: Pathologie, diagnostic et réparation des ouvrages en bois, 2009.

G. Doignon, Passerelle du Pont du Navire à Thiers-Compte rendu d'inspection détaillée du 5 Mai, Opération de recherche LCPC 11N065 sujet 3: Pathologie, diagnostic et réparation des ouvrages en bois, 2009.

J. Duke, Acousto-Ultrasonics-Theory and Application, 1988.

C. Dürager, A. Heinzelmann, and D. Riederer, A wireless sensor system for structural health monitoring with guided ultrasonic waves and piezoelectric transducers, Struct Infrastruct Eng, vol.9, pp.1177-1186, 2013.

M. Eaton, R. Pullin, and K. Holford, Use of macro fibre composite transducers as acoustic emission sensors, Remote Sens, vol.1, pp.68-79, 2009.

O. El-khoury and H. Adeli, Recent Advances on Vibration Control of Structures Under Dynamic Loading, Arch Comput Methods Eng, vol.20, pp.353-360, 2013.

F. Eyma, Caractérisation des efforts de coupe de différentes essences de bois à l'aide de leurs paramètres mécaniques, vol.182, 2002.

J. Fanchon, Guide des sciences et technologies industrielles: dessin industriel et graphes, matériaux, éléments de construction, économie et organisation d'entreprise, 1994.

S. Feliu, C. Andrade, J. A. González, and C. Alonso, A new method forin-situ measurement of electrical resistivity of reinforced concrete, Mater Struct, vol.29, pp.362-365, 1996.

H. Forsén and V. Tarvainen, Accuracy and functionality of hand held wood moisture content meters, Otamedia Oy, vol.420, 2000.

B. Franke, S. Franke, and A. Mueller, Long term monitoring of timber bridgesAssessment and results, Adv Mater Res, vol.778, pp.749-756, 2013.

B. Franke, R. Widmann, A. Müller, and T. Tannert, Assessment and monitoring of the moisture content of timber bridges, Proceedings of 2nd International Conference on Timber Bridges, 2013.

B. Franke, S. Franke, and A. Müller, Case studies: long-term monitoring of timber bridges, J Civ Struct Health Monit, vol.5, pp.195-202, 2014.

M. Fredriksson, Methods for determination of moisture conditions in wood exposed to high moisture levels, vol.60, 2010.

M. Fredriksson, L. Wadso, and P. Johansson, Small resistive wood moisture sensors: a method for moisture content determination in wood structures, Eur J Wood Wood Prod, vol.71, pp.515-524, 2013.
DOI : 10.1007/s00107-013-0709-0

G. Fu, Inspection and Monitoring Techniques for Bridges and Civil Structures, 2005.
DOI : 10.1533/9781845690953

J. Gérard, D. Guibal, and S. Paradis, , 2011.

B. Glisic and D. Inaudi, Fibre Optic Methods for Structural Health Monitoring, 2008.

R. Goncalves, L. Da-costa, and O. A. , Influence of Moisture Content on Longitudinal, Radial, and Tangential Ultrasonic Velocity for Two Brazilian Wood Species, Wood Fiber Sci, vol.40, pp.580-586, 2008.

H. Gu, Y. Zhao, and M. L. Wang, A wireless smart PVDF sensor for structural health monitoring, Struct Control Health Monit, vol.12, pp.329-343, 2005.

J. Guillot, Modélisation et calcul des assemblages vissés. Généralités. Technique de l'ingénieur, p.5560, 2007.

D. Guitard, Mécanique du matériau bois et composites. Cépaduès éditions, 1987.

A. Gustafsson, A. Pousette, and N. Björngrim, Health monitoring of timber bridges, Proceedings of 1st International Conference on Timber Bridges, 2010.

E. Guzman, J. Cugnoni, and T. Gmür, Survivability of integrated PVDF film sensors to accelerated ageing conditions in aeronautical/aerospace structures, Smart Mater Struct, vol.22, p.65020, 2013.

P. Hagedorn and G. Spelsberg-korspeter, Active and Passive Vibration Control of Structures, 2014.

E. F. Hansson, C. Brischke, and L. Meyer, Durability of timber outdoor structuresmodelling performance and climate impacts, Proceedings of 12th World Conference on Timber Engineering, 2012.

R. E. Hernandez and C. B. Caceres, Magnetic Resonance Microimaging of Liquid Water Distribution in Sugar Maple Wood Below Fiber Saturation Point, Wood Fiber Sci, vol.42, pp.259-272, 2010.

S. Hjort, Full-scale method for testing moisture conditions in painted wood paneling, J Coat Technol, vol.68, pp.31-39, 1996.

R. Holm, Electric Contacts-Theory and Application, 1967.

M. Huang, L. Jiang, and P. K. Liaw, Using acoustic emission in fatigue and fracture materials research, JOM-E, vol.50, pp.1-14, 1998.

W. L. James, Electric moisture meters for wood, Dept. of Agriculture, Forest Service, 1963.
DOI : 10.2737/fpl-gtr-6
URL : https://www.fs.usda.gov/treesearch/pubs/download/9823.pdf

W. L. James, Dielectric Properties of Wood and Hardboard: Variation with Temperature, Frequency, Moisture Content, and Grain Orientation. DTIC Document, Dept. of Agriculture, 1975.

W. L. James, Dielectric Behavior of Douglas-Fir at Various Combinations of Temperature, Frequency, and Moisture-Content, For Prod J, vol.27, pp.44-48, 1977.

W. James, The Interaction of Electrode Design and Moisture Gradients in Dielectric Measurements on Wood, Wood Fiber Sci, vol.18, pp.264-275, 1986.

W. L. James, Fundamentals of hand held moisture meters: An outline, Proceedings of ASTM Hand-Held Moisture Meter Workshop, 5 May, pp.13-16, 1994.

S. Jazayeri and A. K. , Detection of transverse moisture gradients in timber by measurements of capacitance using a multiple-electrode arrangement, For Prod J, vol.50, pp.27-32, 2000.

P. Jodin, Le bois matériau d'ingénierie. ARBOLOR, 1994.

J. Johansson, O. Hagman, and B. A. Fjellner, Predicting moisture content and density distribution of Scots pine by microwave scanning of sawn timber, J Wood Sci, vol.49, pp.312-316, 2003.

J. Johansson, A. Blom, and S. Dvinskikh, NMR-measurements for determination of local moisture content of coated wood, J Coat Technol Res, vol.10, pp.601-607, 2013.

M. F. Kabir, K. B. Khalid, W. M. Daud, and S. Aziz, Dielectric properties of rubber wood at microwave frequencies measured with an open-ended coaxial line, Wood Fiber Sci, vol.29, pp.319-324, 1997.

M. F. Kabir, W. M. Daud, K. Khalid, and H. Sidek, Dielectric and ultrasonic properties of rubber wood. Effect of moisture content grain direction and frequency, Holz Als RohWerkst, vol.56, pp.223-227, 1998.

B. Kasal and R. W. Anthony, Advances in in situ evaluation of timber structures, Prog Struct Eng Mater, vol.6, pp.94-103, 2004.

B. Kasal and G. Lear, Moisture Measurement, Situ Assessment of Structural Timber, pp.99-104, 2011.

B. Kasal, Assessment, Reinforcement and Monitoring of Timber Structures-COST FP1101, Adv Mater Res, vol.778, pp.1037-1040, 2013.

H. Kawai, The Piezoelectricity of Poly (vinylidene Fluoride), Jpn J Appl Phys, vol.8, pp.975-976, 1969.

J. Khazaei, Water absorption Characteristic of three wood varieties, Cercet Agron În Mold, vol.134, pp.1-12, 2008.

A. L. Kholkin, N. A. Pertsev, and A. V. Goltsev, Piezoelectricity and crystal symmetry, Piezoelectric and Acoustic Materials for Transducer Applications, pp.17-38, 2008.
DOI : 10.1007/978-0-387-76540-2_2

J. Koch, A. Simon, and R. W. Arndt, Monitoring of moisture content of protected timber bridges, Proceedings of WCTE 2016 (World Conference on Timber Engineering, 2016.

J. Koch, R. W. Arndt, A. Simon, and A. G. Jahreis, Moisture monitoring of nine protected timber bridges in Germany, Proceedings of 3rd International Conference on Timber Bridges, pp.70-79, 2017.

N. Labbé, Mise au point d'une nouvelle méthode de dosage de l'eau dans le bois et caractérisation des composés organiques du pin maritime par résonance magnétique nucléaire domaine temps, vol.225, 2002.

J. Lataste, Évaluation non destructive de l'état d'endommagement des ouvrages en béton armé par mesures de résistivité électrique, vol.295, 2002.

P. Laugier and G. Haïat, Introduction to the Physics of Ultrasound, Bone Quantitative Ultrasound, pp.29-45, 2011.
URL : https://hal.archives-ouvertes.fr/hal-01649282

P. Lavisci, Pathologies des structures en bois: analyse des caractéristiques physiques et mécaniques des collages structuraux pour la restauration des charpentes, vol.164, 2001.

, Recommandations pour l'inspection détaillée des ouvrages en bois, Guide technique du LCPC, 2008.

L. Roy and R. , Ouvrages d'art en bois-Perspectives de développement en France, 2013.

T. Lechner, In-situ assessment of timber structures-Assessment methods and case studies, vol.48, 2013.

A. Leconte, Caractérisation des mesures et grandeurs à mesurer, 1995.

R. H. Leicester, Engineered durability for timber construction, Prog Struct Eng Mater, vol.3, pp.216-227, 2001.

D. Leicher and T. Laz, Usages durables du bois en milieu urbain. Guide du ALEC Plaine Commune (Agence Locale de l'Énergie et du Climat de Plaine Commune, 2014.

W. H. Liao, D. H. Wang, and S. L. Huang, Wireless Monitoring of Cable Tension of CableStayed Bridges Using PVDF Piezoelectric Films, J Intell Mater Syst Struct, vol.12, pp.331-339, 2001.

R. T. Lin, Review of the electrical properties of wood and cellulose, For Prod J, vol.17, pp.54-60, 1967.

Z. Liu, S. Liu, and Y. Luo, Permittivity measurement of wood based on an uniplanar capacitance sensor, 2010 IEEE International Conference on Information and Automation (ICIA), pp.912-916, 2010.

, Guide du LMC (Laboratoire de Matériaux de Construction), LMC, 2011.

N. Ludwig, V. Redaelli, R. E. Augelli, and F. , Moisture detection in wood and plaster by IR thermography, Infrared Phys Technol, vol.46, pp.161-166, 2004.

M. Ma?ka, M. Rosiek, and A. Martowicz, Lamb wave transducers made of piezoelectric macro-fiber composite, Struct Control Health Monit, vol.20, pp.1138-1158, 2013.

M. Marjanovi?, V. Paunovi?, and Z. Priji?, On the measurement methods for dielectric constant determination in Nb/BaTiO3 ceramics, X International Symposium on Industrial Electronics-INDEL, pp.38-41, 2014.

H. M. Matt, D. Scalea, and F. L. , Macro-fiber composite piezoelectric rosettes for acoustic source location in complex structures, Smart Mater Struct, vol.16, pp.1489-1499, 2007.

M. Melnykowycz, X. Kornmann, and C. Huber, Performance of integrated active fiber composites in fiber reinforced epoxy laminates, Smart Mater Struct, vol.15, pp.204-212, 2006.

R. Menguy, Mesure des caractéristiques des matériaux isolants solides, 1997.

M. J. Montero, J. De-la-mata, E. M. Hermoso, and E. , Influence of moisture content on the wave velocity to estimate the mechanical properties of large cross-section pieces for structural use of Scots pine from Spain, Maderas Cienc Tecnol, vol.17, pp.407-420, 2015.

C. Moron, L. Garcia-fuentevilla, A. Garcia, and A. Moron, Measurement of Moisture in Wood for Application in the Restoration of Old Buildings, Sensors, vol.16, pp.697-705, 2016.

J. Muth, Basic Statistics and Pharmaceutical Statistical Applications, Third Edition, 2014.

S. Naar, Evaluation non destructive du béton par mesures de résistivité électrique et thermographie infrarouge passive, vol.290, 2006.

J. Natterer, J. L. Sandoz, and M. Rey, Construction en bois: matériau, technologie et dimensionnement. PPUR (Presses polytechniques et universitaires romandes), 2004.

P. Navi and F. Heger, Comportement thermo-hydromécanique du bois: applications technologiques et dans les structures. Presses polytechniques et universitaires romandes, 2005.

T. A. Nguyen, Approches expérimentales et numériques pour l'étude des transferts hygroscopiques dans le bois, vol.180, 2014.

P. Norberg, Electrical Measurement of Moisture Content in Porous Building Materials, Eighth International Conference on Durability of Building Materials and Components (8DBMC), pp.1030-1039, 1999.

P. Norberg, Monitoring wood moisture content using the WETCORR method Part 1: Background and theoretical considerations, Holz Als Roh-Werkst, vol.57, pp.448-453, 1999.

P. Norberg, Monitoring wood moisture content using the WETCORR method Part 2: Calibration and validation, Holz Als Roh-Werkst, vol.58, pp.129-134, 2000.

M. P. Norton and R. Greenhalgh, Estimation of moisture content in timber using ultrasonics, Appl Energy, vol.35, pp.267-297, 1990.

Y. Okabe and F. Nakayama, Damage detection in CFRP laminates by ultrasonic wave propagation using MFC actuator and FBG sensor, Trans Jpn Soc Aeronaut Space Sci Space Technol Jpn, vol.7, pp.7-12, 2009.

S. W. Or, H. Chan, and C. L. Choy, P(VDF-TrFE) copolymer acoustic emission sensors, Sens Actuators Phys, vol.80, pp.237-241, 2000.

L. Passarini, Étude du comportement physique des bois au-dessus et au-dessous du point de saturation des fibres, vol.167, 2015.

M. Patton-mallory, K. D. Anderson, and R. C. Degroot, An acousto-ultrasonic method for evaluating decayed wood, Proc. of Sixth Nondestructive Testing of Wood Symposium, pp.167-189, 1987.

M. Perrin, Etude et caractérisation par émission acoustique et mesures électrochimiques de la fragilisation par l'hydrogène des câbles de précontrainte. Application aux ouvrages d'art, vol.138, 2009.

K. Perveen, G. E. Bridges, S. Bhadra, and D. J. Thomson, Corrosion Potential Sensor for Remote Monitoring of Civil Structure Based on Printed Circuit Board Sensor, Ieee Trans Instrum Meas, vol.63, pp.2422-2431, 2014.

H. S. Pham, L. Roy, R. Caron, J. Foret, and G. , Nouveaux tabliers bois-BHP-carbone pour les ouvrages d'art, GC'2007, 2007.

T. P. Philippidis and D. G. Aggelis, An acousto-ultrasonic approach for the determination of water-to-cement ratio in concrete, Cem Concr Res, vol.33, pp.525-538, 2003.

M. C. Phillipson, P. H. Baker, and M. Davies, Moisture measurement in building materials: an overview of current methods and new approaches, Build Serv Eng Res Technol, vol.28, pp.303-316, 2007.

F. Plassat, Travail mécanique du bois-Mise en oeuvre du bois. Techniques de l'ingénieur, BM, vol.7, pp.404-406, 2009.

A. Pousette and P. Fjellström, Experiences from timber bridge inspections in Swedenexamples of influence of moisture, 2016.

S. Priya, Advances in energy harvesting using low profile piezoelectric transducers, J Electroceramics, vol.19, pp.167-184, 2007.

S. Priya, R. Taneja, R. Myers, and R. Islam, Piezoelectric energy harvesting using bulk transducers, Piezoelectric and Acoustic Materials for Transducer Applications, pp.373-388, 2008.

S. L. Quarles and R. Lemaster, Current AE/AU research in solid wood and wood-based composites at the University of California Forest Products Laboratory. In: Nondestructive testing and evaluation for manufacturing and construction, pp.177-188, 1989.

A. Raghavan and C. E. Cesnik, Review of guided-wave structural health monitoring, Shock Vib Dig, vol.39, pp.91-116, 2007.

D. R. Raichel, The science and applications of acoustics, 2006.

M. B. Rao, M. R. Bhat, and C. Murthy, Structural health monitoring (SHM) using strain gauges, PVDF film and fiber bragg grating (FBG) sensors: A comparative study, Proceeding of National Seminar on Non-Destructive Evaluation, pp.333-337, 2006.

F. Renaudin and P. Jandin, Design of wood-concrete composite beams under deck bridgeTheoretical developments and construction examples, Proceedings of 3rd International Conference on Timber Bridges, pp.204-249, 2017.

M. Riggio, A. Sandak, and J. Sandak, 8th International Conference on Structural Analysis of Historical Constructions, SAHC 2012, pp.2504-2512, 2012.

M. Riggio, R. W. Anthony, and F. Augelli, situ assessment of structural timber using non-destructive techniques, vol.47, pp.749-766, 2014.

I. Rodríguez-abad, R. Martínez-sala, F. García-garcía, and R. Capuz-lladró, Nondestructive methodologies for the evaluation of moisture content in sawn timber structures: ground-penetrating radar and ultrasound techniques, Surf Geophys, vol.8, pp.475-482, 2010.

R. J. Ross, Wood Handbook: Wood as an Engineering Material, 2010.

T. R. Rossing, , 2014.

A. Safari and E. K. Akdogan, Piezoelectric and acoustic materials for transducer applications, 2008.

H. Sakai, A. Minamisawa, and K. Takagi, Effect of moisture content on ultrasonic velocity and attenuation in woods, Ultrasonics, vol.28, pp.382-385, 1990.

K. I. Salas and C. E. Cesnik, Guided wave excitation by a CLoVER transducer for structural health monitoring: theory and experiments, Smart Mater Struct, vol.18, p.75005, 2009.

O. Schmidt, Wood and Tree Fungi-Biology, Damage, Protection, and Use, 2006.

A. Senalik, F. C. Beall, O. Dell, K. Reis, and H. , Detection and assessment of wood decay in glulam beams using a through-transmission ultrasonic approach, Proc. SPIE 6932, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems. p 69321W, 2008.

, Les ponts en bois : Comment assurer leur durabilité. Guide technique du SETRA (Service d'études technique des routes et autoroutes), SETRA, 2006.

D. Sharma, S. Goyal, R. Khanna, and A. Mukherjee, Non-destructive testing of materials using capacitive sensing technique, MIT Int J Electron Commun Eng, vol.1, pp.73-77, 2011.

J. F. Siau, Transport processes in wood, 1984.

J. F. Siau, Wood: influence of moisture on physical properties, 1995.

W. T. Simpson, Predicting equilibrium moisture content of wood by mathematical models, Wood Fiber Sci, vol.5, pp.41-49, 1973.

M. S. Sivertsen, Liquid water absorption in wood cladding boards and log sections with and without surface treatment, vol.122, 2010.

M. S. Sivertsen and G. I. Vestøl, Liquid water absorption in uncoated Norway spruce (Picea abies) claddings as affected by origin and wood properties, Wood Mater Sci Eng, vol.5, pp.181-193, 2010.
DOI : 10.1080/17480272.2010.503939

M. S. Sivertsen and P. O. Flaete, Water absorption in coated Norway spruce (Picea abies) cladding boards, Eur J Wood Wood Prod, vol.70, pp.307-317, 2012.
DOI : 10.1007/s00107-011-0557-8

C. Skaar, Some factors involved in the electrical determination of moisture gradients in wood, For Prod J, vol.14, pp.239-243, 1964.

C. Skaar, Wood-water relations, 1988.
DOI : 10.1007/978-3-642-73683-4

H. A. Sodano, Macro-fiber composites for sensing, actuation and power generation, vol.138, 2003.

A. J. Stamm, The Electrical Resistance of Wood as a Measure of Its Moisture Content, Ind Eng Chem, vol.19, pp.1021-1025, 1927.

A. J. Stamm, The fiber-saturation point of wood as obtained from electrical conductivity measurements, Ind Eng Chem Anal Ed, vol.1, pp.94-97, 1929.
DOI : 10.1021/ac50066a021

A. J. Stamm, An Electrical Conductivity Method for Determining the Moisture Content of Wood, Ind Eng Chem Anal Ed, vol.2, pp.240-244, 1930.

A. J. Stamm, The passage of water through the capillary structure of wood, Discuss Faraday Soc, vol.3, pp.264-273, 1948.

A. J. Stamm, Bound-water diffusion into wood in across-the-fibre directions, For Prod J, vol.10, pp.524-532, 1960.

A. J. Stamm, Wood and cellulose science, 1964.

W. Staszewski, C. Boller, and G. R. Tomlinson, Health Monitoring of Aerospace Structures: Smart Sensor Technologies and Signal Processing, 2004.

A. Steiger, Guide de l'Office fédéral des questions conjoncturelles, 1991.

M. J. Sundaresan, A. Ghoshal, W. N. Martin, and M. J. Schulz, A continuous sensor to measure acoustic waves in plates, J Intell Mater Syst Struct, vol.12, pp.41-56, 2001.
DOI : 10.1177/104538901772664205

V. Tamme, P. Muiste, and R. Kask, Experimental study of electrode effects of resistance type electrodes for monitoring wood drying process above fibre saturation point, For Stud, vol.56, pp.42-55, 2012.

T. Tanaka, S. Avramidis, and S. Shida, Evaluation of moisture content distribution in wood by soft X-ray imaging, J Wood Sci, vol.55, pp.69-73, 2009.
DOI : 10.1007/s10086-008-0997-x

T. Tannert, R. Berger, M. Vogel, and P. Liebhold, Remote moisture monitoring of timber bridges: a case study, Proceedings of the 5th international conference on structural health monitoring of intelligent infrastructure, pp.11-15, 2011.

P. A. Tarazaga, D. J. Inman, and W. K. Wilkie, Control of a Space Rigidizable Inflatable Boom Using Macro-fiber Composite Actuators, J Vib Control, vol.13, pp.935-950, 2007.
DOI : 10.1177/1077546307078757

E. Terzic, J. Terzic, R. Nagarajah, and M. Alamgir, Capacitive Sensing Technology, A Neural Network Approach to Fluid Quantity Measurement in Dynamic Environments, pp.11-37, 2012.
DOI : 10.1007/978-1-4471-4060-3_2

A. B. Thien, G. Park, and C. R. Farrar, Health monitoring of pipeline systems using macro-fiber composite active-sensors, Steel Struct, vol.7, pp.33-48, 2007.
DOI : 10.2172/883462
URL : https://digital.library.unt.edu/ark:/67531/metadc873364/m2/1/high_res_d/883462.pdf

H. D. Tiemann, Effect of moisture upon the strength and stiffness of wood, Bulletin, vol.70, 1906.

G. I. Torgovnikov, Dielectric properties of wood and wood-based materials, 1993.

P. Triboulot and D. Calvi, Les ponts en bois, mythe ou possibilité ? In : 18ème Colloque sur la progression de la recherche québécoise sur les ouvrages d'art, 2011.

J. L. Trinh and Y. M. Ligot, Structures en bois. Techniques de l'ingénieur, C 2440v2, 2014.

M. Trouy and P. Triboulot, Matériau bois-Structure et caractéristiques. Techniques de l'ingénieur, C 925v2, 2012.

M. Trouy and P. Triboulot, Matériau bois-Durabilité. Techniques de l'ingénieur, C 926v2, 2012.

D. Vasic and F. Costa, Applications des éléments piézoélectriques en électronique de puissance. Techniques de l'ingénieur, vol.3, p.235, 2011.

H. F. Vermaas, Experimental Variables Affecting the Measurement of the DC Resistance of Wood, Holzforsch-Int J Biol Chem Phys Technol Wood, vol.29, pp.140-144, 1975.

, Vermaas HF (1982) D.C. Resistance Moisture Meters for Wood, South Afr For J, vol.121, pp.88-92

H. Viitanen and A. Ritschkoff, Brown rot decay in wooden constructions : effect of temperature, humidity and moisture, 1991.

L. Wadsö, Studies of water vapor transport and sorption in wood, vol.102, 1993.

C. Wang, R. H. Leicester, G. C. Foliente, and M. N. Nguyen, Timber service life designDesign guide for durability. Technical Design Guide issued by Forest and Wood Products Australia, 2013.

, Wenner F (1915) A method for measuring earth resistivity, Bull Bur Stand, vol.12, pp.469-478

W. K. Wilkie, J. High, and J. Bockman, Reliability testing of NASA piezocomposite actuators, Proceedings of the 8th International Conference on New Actuators. Citeseer, pp.10-12, 2002.

R. B. Williams, G. Park, D. J. Inman, and W. K. Wilkie, An overview of composite actuators with piezoceramic fibers, 20th International Modal Analysis Conference, pp.421-427, 2002.

H. Yang, L. Yu, and L. Wang, Effect of moisture content on the ultrasonic acoustic properties of wood, J For Res, vol.26, pp.753-757, 2015.

C. Zhai, D. Hanaor, and G. Proust, Interfacial electro-mechanical behaviour at rough surfaces, Extreme Mech Lett, vol.9, pp.422-429, 2016.