. Nilka and . Acevedo, Manufacture of backings for TOFD ultrasonic transducers

I. Altpeter and . Co, Nondestructive characterization of neutron induced embrittlement in nuclear pressure vessel steel microstructures by using nondestructive electromagnetic testing, ENDE 2010-The 15th International Workshop on Electromagnetic Nondestructive Evaluation, vol.2, pp.13-16, 2010.

I. Altpeter and . Co, Early detection of damage in thermo-cyclically loaded austenitic steels: Development of condition monitoring technology within the context of aging management, BIND The 8th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, pp.20-22, 2011.

H. Mohammad and . Amini, Porous Ceramics as Backing Element for High-Temperature Transducers, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol.62, issue.2, 2015.

H. Mohammad and . Amini, A new high temperature ultrasonic transducer for continuous inspection, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control

J. Assaad, Influence of the thickness and the attenuation coefficient of a backing on the response of transducers, vol.34, pp.103-106, 1996.

Y. Bar-cohen, Multiphase backing materials for piezoelectric broadband Transducers" JASA, vol.75, pp.1629-1633, 1984.

Y. Bar-cohen, Patent Multiphase_backing_materials_for_piezoelectrc broadband Transducers, 1986.

L. M. Brekhoyskikh, Waves in Layered Media, p.51, 1960.

J. W. Cookson, Theory of the piezo-resistive effect, Phys.Rev, vol.47, pp.194-195, 1935.

M. Pereira-da-cunha, Recent Advances in Harsh Environment Acoustic Wave Sensors for Contemporary Applications, IEEE, vol.978, issue.1, 2011.

P. Curie and J. Curie, Contractions et dilatations produites par des tensions électriques dans les cristaux hémièdres à faces inclinées" Comptes rendus de l'Académie des Sciences, vol.XCIII, p.1137

D. J. Young, High temperature single crystal 3c-SiC, IEEE, vol.04, 2004.

A. El, Caractérisation ultrasonore de plaques viscoélastiques homogènes et composites, 2011.

M. M. Ettefagh, Knock detection in spark ignition engines by vibration analysis of cylinder block: A parametric modeling approach, Mechanical Syst and Signal Processing, vol.22, pp.1495-1512, 2008.

D. L. Folds, Experimental Determination of Ultrasonic Wave Velocities in Plastics, Elastomers, and Syntactic Foam as a Function of, JASA, vol.52, issue.1, 1972.

F. Fournel, C. Martin-cocher, D. Radisson, V. Larrey, E. Beche et al., Water Stress Corrosion in Bonded Structures, ECS Journal of Solid State Science and Technology, vol.4, issue.5, pp.124-130, 2015.
URL : https://hal.archives-ouvertes.fr/hal-02015940

M. G. Grewe, Acoustic Properties of Particle-Polymer Composites for Transducer Backing Applications, Ultrasonics Symposium, vol.90, issue.5607, pp.713-716, 1989.

T. R. Gururaja, Current status and future trends in ultrasonic transducers for medical imaging, Proc. Int. Symp. Applications Ferroelectrics, pp.223-231

. Mohd-nizar-hamidon, High-Temperature 434 MHz Surface Acoustic Wave Devices Based on GaPO4, IEEE transactions on ultrasonics, ferroelectrics, and frequency control, vol.53, issue.12, 2006.

. Hammer, The optical properties of semitransparent mirrors of nonmetallic materials ,Die optischen Eigenschaften teildurchtassiger spiegel aus nichtmetallischen Stoffen, Fer tech. Phys, issue.8, pp.169-179, 1943.

B. Hartmann, Immersion apparatus for ultrasonic measurements in polymers, JASA, vol.56, issue.1469, 1974.

B. Hartmann, Immersion apparatus for ultrasonic measurements in polymers, JASA, vol.56, issue.1469, 1974.

M. S. Hughes, A Relationship between Frequency Dependent Ultrasonic Attenuation and porosity in composite laminates, 1988.

C. Jenand, Real-time monitoring of barrel thickness and barrel/screw separation using ultrasound, Meas Sci Technol, vol.16, issue.1, p.9, 2005.

L. Kang-il, Phase velocity and normalized broadband ultrasonic attenuation in Polyacetal cuboid, JASA, vol.121, issue.6, 2007.

R. Ka?ys, A. Volei?is, and B. , Volei?ien High temperature ultrasonic transducers: review ISSN, ULTRASOUND), vol.63, issue.2, pp.7-17, 2008.

K. Kim, Design, fabrication and characterization of high temperature piezoelectric vibration sensor using YCOB crystals, Sensors and actuators, vol.178, pp.40-48, 2012.

M. Kobayashi, Piezoelectric thick bismuth titanate/lead zirconate titanate composite film transducers for smart NDE of metals, Smart Mater Struct, vol.13, pp.951-957

M. Kobayashi, Flexible ultrasonic transducers, IEEE Trans Ultrason, Ferroelectr, Freq Contr, vol.53, issue.1478, 2006.

M. Kobayashi, High-temperature integrated and flexible ultrasonic transducers for nondestructive testing, NDT&E Inter, vol.42, pp.157-61, 2009.

G. Kossoff, The Effects of Backing and Matching on the Performance of Piezoelectric Ceramic Transducers, IEEE, vol.13, issue.1, 1966.

J. D. Larson, Tungsten-Polyvinyl Chloride Composite Materials-Fabrication & Performance, Ultrasonics Symposium, vol.10, issue.1109, p.342, 1978.

C. Lawrence and L. , Ultrasonic Impedance Matching from Solids to Gases, IEEE, vol.12, issue.2, p.38, 1964.

S. Lees, Acoustic Properties of Tungsten-Vinyl Composites, IEEE, vol.20, issue.1, 1973.

. Lutsch, Solid mixtures with Specified Impedances and High Attenuation for Ultrasonic Waves, JASA, vol.34, issue.131, 1962.

P. A. Meignen, Capteur ultrasonore multiélément dédié à la caractérisation quantitative haute résolution" thèse en électronique de l'université de Montpellier, vol.2016

D. Miller, Elastomeric graded acoustic impedance coupling device, Brevets. US, vol.3663842, p.1972

P. Navi, Propriétés acoustiques des matériaux Propagation des ondes planes harmonique, ISBN, vol.10, pp.978-980, 2006.

A. David, High-Temperature (>500°C) UltrasonicTransducers: An Experimental Comparison Among Three Candidate Piezoelectric Materials, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency control, vol.60, issue.5, 2013.

A. David, High-Temperature (>500°C) Ultrasonic Transducers: An Experimental Comparison Among Three Candidate Piezoelectric Materials, Ferroelectrics, and Fr 1010 equency Control, vol.60, 2013.

N. D. Patel, High Frequency-High temperature ultrasonic transducers" review of progress in Quantitative Nondestructive Evaluation, vol.9, pp.823-828

K. E. Petersen, Silicon as a mechanical material, Proc. IEEE, vol.70, pp.420-457, 1982.

D. W. Phillips, Ultrasonic Studies of Polycarbonate, Polysulfone, and Polyether Sulfone, Journal applied polymer, vol.21, issue.7, 1977.

F. Pockels, Pyro-und piezoelektrizität, Elektrizität und Magnetismus" I Handbuch der Physik Leipzig, vol.4, pp.766-93, 1905.

F. Rieutord, Rough Surface Adhesion Mechanisms for wafer Bonding, ECS Transactions, vol.3, 2006.

D. Robert and . Corsaro, Influence of backing complianceo n transducer performance, JASA, vol.93, 1995.

S. Rokhlin, Acoustic properties of tungsten-tin composites, JASA, vol.69, issue.1505, 1981.

E. Rosenkrantz, Conception et tests d'un capteur ultrasonore dédié à la mesure de la pression et de la composition des gaz de fission dans les crayons combustibles, Thèse en électronique à l'université de Montpellier, 2002.

H. Salzburger, EMATs and its potential for modern NDE: State of the art and latest applications, IEEE International Ultrasonic Symposium Proceedings, pp.621-629

J. C. Sanchez and W. V. Wright, Recent developments in flexible silicon strain gages, Semiconductor and Conventional Strain Gages, pp.307-345, 1962.

C. M. Sayers, Ultrasonic properties of transducer backings, Ultrasonics, vol.22, issue.2, pp.57-60, 1984.

A. R. Selfridge, Approximate Material Properties in Isotropic Materials, IEEE, vol.32, issue.3, 1985.

J. Shih, K. M. , and J. , Flexible metallic ultrasonic transducers for structural health monitoring of pipes at high temperatures, IEEE Trans Ultrason, Ferroelectr, Freq Contr, vol.57, pp.2103-2113, 2010.

K. K. Shung and . Co, Piezoelectric materials for high frequency medical imaging application : A review, Journal of Electroceramics, vol.19, pp.139-145, 2007.

D. K. Singh, An ultrasonic characterization of ferrofluid, Ultrasonics, vol.49, issue.8, 2009.

W. M. Smith, Factors in the design of ultrasonic probes, Ultrasonics, vol.17, issue.1, 1979.

J. Souquet, Design of Low-Loss Wide-Band Ultrasonic Transducers for Noninvasive Medical Application, IEEE, vol.26, issue.2, 1979.

J. Stratton, Electromagnetic Theory, p.514, 1941.

H. J. Sutherland, An acoustic characterization of polymethyl methacrylate and three epoxy formulations, Journal of applied physics, vol.43, issue.4022, 1972.

H. J. Sutherland, Acoustical determination of the shear relaxation functions for polymethyl methacrylate and epoxy 828-Z, Journal of applied physics, vol.49, issue.3941, 1978.

R. C. Turner, high temperature acoustic and vibration sensors: a review Applied acoustics, vol.41, pp.299-324, 1994.

H. Wang, High frequency properties of passive materials, IEEE, vol.48, issue.1, 2001.

. Bibliographie,

K. K. Chawla, Metal matrix composites in automotive applications, Adv. Mater. Process, vol.4, pp.29-31, 2006.

D. Bouvard, Mécanique et Ingénierie des matériaux : Métallurgie des poudres" ed Hermes N°53118 Janvier, p.128, 2002.

P. S. Giiman and J. S. Benjamin, Mechanical alloying, Ann Rev Mater Sci, vol.13, p.279, 1983.

K. Hata and . Takahashi, corrosion study in direct cycle Pb-Bi cooled fast reactor, bulletin of research laboratory for nuclear reactors (Tokyo institute of technology), vol.30, pp.230-234, 2006.

W. H. Hunt and D. B. Miracle, Automotive applications of metal matrix composites, ASM Handbook, vol.21, pp.1029-1032, 2001.

P. and J. James, Isostatic pressing, Elsevier Applied Science, vol.20, 1977.

K. A. Keller, J. , G. Kerans, and R. J. , Oxide-oxide composites, Handbook of Ceramic Composites, pp.377-421, 2005.

C. C. Koch, Materials synthesis by mechanical alloying, Ann Rev Mater Sci
DOI : 10.1146/annurev.ms.19.080189.001005

W. Krenkle, ceramic matrix composite: fiber reinforced ceramis and their applications, pp.978-981, 2008.

L. and L. Mo, Modeling of the mechanical Alloying process, J Mater Process Techn, vol.52, pp.539-546, 1995.

M. Parlier, M. Ritti, and A. Jankowiak, Potential and perspectives for oxide/oxide composites, J. Aerospace Lab, vol.3, 2011.
URL : https://hal.archives-ouvertes.fr/hal-01183659

G. Raisson, Production of high performance static parts by the Isoprec Process, Proceedings of, vol.5, 1998.

S. Rokhlin, S. Golan, and Y. Gefen, Acoustic properties of tungsten-tin composites, J. Acoust. Soc. Am, vol.69, pp.1505-1506, 1981.

C. M. Sayers, Ultrasonic properties of transducer backings, Ultrasonics, vol.22, pp.57-60, 1984.

C. Suryanarayama, Mechanical alloying and milling, Prog Mater Sci, vol.46, issue.1, p.184, 2001.

F. Swinkels, Mechanisms of hot-isostatic pressing, Acta metal, vol.31, issue.11, pp.1829-1840, 1983.

W. Tietz, behavior and properties of refractory metals, pp.1-419, 1965.

W. Wang, Modeling and simulation of the dynamic process in hight energy ball milling of metal powders, 2000.

J. Warren, Metal powder Industries federation, vol.18, 1988.

W. D. Wilkinson, properties of refractory metals" Gordon and breach science Publishers, vol.38, pp.1-355, 1969.

. Kadiri-moulay and . Saddik, compression de poudre pharmaceutiques et interaction avec l'outillage analyse expérimentale et modélisation numérique" thèse en génie des procédés soutenu le 30 novembre, 2004.

D. G. , Aggelis and CO, An iterative effective medium approximation (IEMA) for wave dispersion and attenuation predictions in the particulate composites, suspensions and emulsions, JASA, vol.116, issue.6, 2004.

R. Bass, diffraction effects in the ultrasonic fieldof a piston source, JASA, 1958.

S. Baudoin, Comparison between prediction and measurement of viscoelastic moduli in composite materials versus temperature using ultrasonic immersion technique with oil», pp.3450-3457, 1997.

L. L. Foldy, the multiple scattering of waves, phys. Rev, vol.67, issue.107, p.119, 1945.

D. K. Hsu, Nondestructive testing using air-borne ultrasound, vol.44, pp.1019-1024, 2006.

J. Y. Kim, Dispersion of elastic waves in random particulate composites, J. Acoust. Soc. Am, vol.97, pp.1380-1388, 1995.

C. Lawrence and W. Lynnworth, Continuous wave transmission techniques for measuring ultrasonic phase and group velocities in dispersive materials and composites, J. Acoust. Soc. Am, vol.70, issue.6, 1981.

F. and L. Marple, Estimating Group Delay and Phase Delay via Discrete-Time Analytic Cross-Correlation, IEEE Transactions on signal processing, vol.47, issue.9, 1999.

J. Mobley, Broadband measurements of phase velocity in Albunex® suspensions, JASA, vol.103, issue.4, 1998.

M. O'donnell, E. Jaynes, and J. G. Miller, Kramers-Kronig relationship between ultrasonic attenuation and phase velocity » JASA, vol.69, 1981.

P. He, Measurement of acoustic dispersion using both transmitted and reflected pulses, Ultrasonics, vol.39, issue.1, 2001.

P. He, Direct Determination of ultrasonic parameters based on attenuation and dispersion measurements, Ultrasonics imaging, vol.20, issue.4, 1998.

P. He, Direct measurement of ultrasonic dispersion using a broadband transmission technique, Ultrasonics, vol.37, issue.1, 1999.

R. Pintelon, System IdentificationA Frequency Domain Approach ou Ljung, L. System Identifica-tion: Theory for the User, 1999.

P. Rogers and A. Van-buren, An exact expression for the Lommel diffraction correction integral, JASA, vol.55, 1993.

W. Sachse, On the determination of phase and group velocities of dispersive waves in solids, Journal of applied phys, vol.49, 1978.

C. M. Sayers, Ultrasonic properties of transducer backings, Ultrasonics, vol.22, issue.2, pp.57-60, 1984.

T. L. Szabo, A model for longitudinal and shear wave propagation in viscoelastic media, J. Acoust. Soc. Am, vol.107, issue.5, pp.2437-2446, 2000.

T. Szabo, A model for longitudinal and shear wave propagation in viscoelastic media, JASA, vol.107, 1995.

T. L. Szabo, Causal theories data for acoustic attenuation obeying a frequency power law, JASA, vol.95, 1995.

T. L. Szabo, Causal theories data for acoustic attenuation obeying a frequency power law, J. Acoust. Soc. Am, pp.14-24, 1995.

J. M. Tribolet, A new phase unwrapping algorithm, IEEE Trans. Acoust., Speech, Signal Process, vol.25, pp.170-177, 1977.

R. L. Trousil, K. R. Waters, and J. G. , Miller « Experimental validation of the use of KramersKronig relations to eliminate the phase sheet ambiguity in broadband phase Spectroscopy, JASA, vol.109, 2001.

H. Wang, « Improved ultrasonic spectroscopy methods for characterization of dispersive materials, IEEE transaction on ultrasonics, ferroelectrique, and frequency control, vol.48, 2001.

W. Xu and J. Kaufman, Diffraction correction methods for insertion ultrasonic attenuation estimation, IEEE, vol.40, 1993.

D. G. , Aggelis and CO, An iterative effective medium approximation (IEMA) for wave dispersion and attenuation predictions in the particulate composites, suspensions and emulsions, JASA, vol.116, issue.6, 2004.

M. H. Amini and . Co, Porous ceramics as backing element for high-temperature transducers, IEEE transaction on ultrasonics, ferroelectrics, and frequency control, vol.62, issue.2, 2015.

V. M. Merkulova, « Acoustical properties of some solid heterogeneous media at ultrasonic frequencies, Sov. Phys. Acoust, vol.11, issue.55, 1965.

C. M. Sayers, Ultrasonic properties of transducer backings, Ultrasonics, vol.22, issue.2, pp.57-60, 1984.

C. F. Ying, Scattering of plane longitudinal wave by a spherical obstacle in an isotropically elastic solid, J.Appl.Phys, vol.27, issue.1086, 1956.