. , I-Généralisation à d'autres terres : terre à pisé et terre rouge

. , Potentiel de libération d'ions calcium sous acidification

H. .. Besoin-en,

. , Elaboration d'un mortier et tests au plot Vicat sur différents liants

. .. Conclusion,

. , 186 1.1) Adaptation du protocole d'élaboration des éprouvettes

.. .. Essais, 187 2.1) Consistance et maintien d'ouvrabilité des premières gâchées

. , 191 3.1) Optimisation de la formulation

. .. Conclusion,

V. .. Conclusion-du-chapitre,

, Dans ce chapitre nous explorons la faisabilité du procédé sur d'autres terres moins calcaires

T. Alban, , p.203

B. Aguilar and R. , The potential use of chitosan as a biopolymer additive for enhanced mechanical properties and water resistance of earthen construction. Construction and Building Materials, 114, pp.625-637, 2016.

H. Akhondi, Gelcasting of alumina nanopowders based on gelation of sodium alginate, Ceramics International, vol.35, issue.3, pp.1033-1037, 2009.

C. Allain and L. Salome, Gelation of semidilute polymer solutions by ion complexation: critical behavior of the rheological properties versus cross-link concentration, Macromolecules, vol.23, issue.4, pp.981-987, 1990.

F. Andreola, The role of sodium hexametaphosphate in the dissolution process of kaolinite and kaolin, Journal of the European Ceramic Society, vol.24, issue.7, pp.2113-2124, 2004.

R. Anger, Approche granulaire et colloïdale du matériau terre pour la construction, 2011.

R. Anger and L. Fontaine, Bâtir en terre: du grain de sable à l'architecture, 2009.

A. Arrigoni, Reduction of rammed earth's hygroscopic performance under stabilisation: an experimental investigation, Building and Environment, vol.115, pp.358-367, 2017.

M. A. Axelos, M. M. Mestdagh, and J. Francois, Phase Diagrams of Aqueous Solutions of Polycarboxylates in the Presence of Divalent Cations, Macromolecules, vol.27, issue.22, pp.6594-6602, 1994.

B. Balzer and L. J. Gauckler, Novel Colloidal Forming Technique: Direct Coagulation Casting, Handbook of Advanced Ceramics: Materials, Applications, Processing and Properties, vol.2, p.435, 2003.

B. Balzer, M. K. Hruschka, and L. J. Gauckler, Coagulation Kinetics and Mechanical Behavior of Wet Alumina Green Bodies Produced via DCC, Journal of Colloid and Interface Science, vol.216, issue.2, pp.379-386, 1999.

L. Barcelo, Cement and carbon emissions, Materials and Structures, vol.47, issue.6, pp.1055-1065, 2014.

H. A. Barnes, A review of the slip (wall depletion) of polymer solutions, emulsions and particle suspensions in viscometers: its cause, character, and cure, Journal of Non-Newtonian Fluid Mechanics, vol.56, issue.3, pp.221-251, 1995.

H. A. Barnes, Thixotropy-a review, Journal of Non-Newtonian Fluid Mechanics, vol.70, issue.1-2, pp.1-33, 1997.

Q. Barral and C. Xavier, Superimposition of orthogonal flows in complex fluids : set-up of the experiment, application to suspensions and yield stress fluids, 2011.
URL : https://hal.archives-ouvertes.fr/pastel-00657329

P. Bednarek, Gelcasting of alumina with a new monomer synthesized from glucose, Journal of the European Ceramic Society, vol.30, issue.8, pp.1795-1801, 2010.

A. N. Bennett, Alginate gels. EP Patent 0345886, 1989.

L. Bergström, Colloidal Processing of ceramics. Handbook of Applied Surface and Colloidal Chemistry, pp.201-218, 2001.

L. Bergström and E. Sjöström, Temperature induced gelation of concentrated ceramic suspensions: rheological properties, Journal of the European Ceramic Society, vol.19, issue.12, pp.2117-2123, 1999.

R. W. Billington, J. A. Williams, and G. J. Pearson, , 2006.

, INSA Lyon, tous droits réservés Bibliographie Thèse Alban, p.204

, Journal of Dentistry, vol.34, issue.8, pp.544-555

K. Brahmi, J. François, and D. Dupuis, Rheological studies of the gelation of aqueous solutions of acrylamide-acrylic acid copolymers in the presence of chromium chloride, Rheologica Acta, vol.34, issue.1, pp.86-96, 1995.

Q. B. Bui, Durability of rammed earth walls exposed for 20 years to natural weathering, Building and Environment, vol.44, issue.5, pp.912-919, 2009.

H. Cagnon, Hygrothermal properties of earth bricks, Energy and Buildings, vol.80, pp.208-217, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01850792

K. Cai, Y. Huang, and J. Yang, A Synergistic Low-Toxicity Gelcasting System by Using HEMA and PVP, Journal of the American Ceramic Society, vol.88, issue.12, pp.3332-3337, 2005.

K. Cai, Y. Huang, and J. Yang, Alumina gelcasting by using HEMA system, Journal of the European Ceramic Society, vol.25, issue.7, pp.1089-1093, 2005.

F. Chabert, D. E. Dunstan, and G. Franks, Cross-linked Polyvinyl Alcohol as a Binder for Gelcasting and Green Machining, Journal of the American Ceramic Society, vol.91, issue.10, pp.3138-3146, 2008.

I. Chang, M. Jeon, and G. Cho, Application of microbial biopolymers as an alternative construction binder for earth buildings in underdeveloped countries, International Journal of Polymer Science, 2015.

Y. Chen, Alumina casting based on gelation of gelatine, Journal of the European Ceramic Society, vol.19, issue.2, pp.271-275, 1999.

P. Coussot and J. M. Piau, On the behavior of fine mud suspensions, Rheologica Acta, vol.33, issue.3, pp.175-184, 1994.

T. Davis, Extraction, isolation and cadmium binding of alginate from Sargassum spp, Journal of Applied Phycology, vol.16, issue.4, pp.275-284, 2004.

I. Donati, New Hypothesis on the Role of Alternating Sequences in Calcium?Alginate Gels, Biomacromolecules, vol.6, issue.2, pp.1031-1040, 2005.

I. Donati and S. Paoletti, Material Properties of Alginates, Biology and Applications, pp.1-53, 2009.

M. Dong, Gelcasting of SiC using epoxy resin as gel former, Ceramics International, vol.35, issue.4, pp.1363-1366, 2009.

C. Dove, The development of unfired earth bricks using seaweed biopolymers. EcoArchitecture V: Harmonisation between Architecture and Nature, vol.142, p.219, 2014.

C. A. Dove, F. F. Bradley, and S. V. Patwardhan, Seaweed biopolymers as additives for unfired clay bricks. Materials and Structures, pp.1-20, 2016.
DOI : 10.1617/s11527-016-0801-0
URL : http://eprints.whiterose.ac.uk/97318/3/WRRO_97318.pdf

K. I. Draget, Gel strength of Ca-limited alginate gels made in situ, Hydrobiologia, issue.1, pp.563-565, 1993.
DOI : 10.1007/bf00049071

K. I. Draget, K. Østgaard, and O. Smidsrød, Alginate-based solid media for plant tissue culture, Applied Microbiology and Biotechnology, vol.31, issue.1, pp.79-83, 1989.
DOI : 10.1007/bf00252532

K. I. Draget, K. Østgaard, and O. Smidsrød, Homogeneous alginate gels: A technical approach, Carbohydrate Polymers, vol.14, issue.2, pp.159-178, 1991.

K. I. Draget, G. Skjåk-braek, and O. Smidsrød, Alginate based new materials, International Journal of Biological Macromolecules, vol.21, issue.1-2, pp.47-55, 1997.
DOI : 10.1016/s0141-8130(97)00040-8

K. I. Draget, G. Skjåk-braek, and O. Smidsrød, Alginic acid gels: the effect of alginate chemical composition and molecular weight, Carbohydrate Polymers, vol.25, issue.1, pp.31-38, 1994.

, INSA Lyon, tous droits réservés Bibliographie Thèse Alban, p.205

K. I. Draget, G. Skjåk-braek, and B. T. Stokke, Similarities and differences between alginic acid gels and ionically crosslinked alginate gels, Food Hydrocolloids, vol.20, issue.2-3, pp.170-175, 2006.
DOI : 10.1016/j.foodhyd.2004.03.009

Y. Fang, Multiple Steps and Critical Behaviors of the Binding of Calcium to Alginate, The Journal of Physical Chemistry B, vol.111, issue.10, pp.2456-2462, 2007.

A. Favier, Mécanisme de prise et rhéologie de liants géopolymeres modeles, 2013.

T. A. Fenoradosoa, Extraction and characterization of an alginate from the brown seaweed Sargassum turbinarioides Grunow, Journal of Applied Phycology, vol.22, issue.2, pp.131-137, 2010.

C. F. Ferraris, Measurement of the rheological properties of high performance concrete: state of art report, Journal of research of the national institute of standards and technology, vol.104, issue.5, p.461, 1999.

J. François, Aqueous solutions of acrylamide-acrylic acid copolymers: stability in the presence of alkalinoearth cations, Polymer, vol.38, issue.25, pp.6115-6127, 1997.

C. Galán-marín, C. Rivera-gómez, and J. Petric, Clay-based composite stabilized with natural polymer and fibre, Construction and Building Materials, vol.24, issue.8, pp.1462-1468, 2010.

C. Gallé, Effect of drying on cement-based materials pore structure as identified by mercury intrusion porosimetry: A comparative study between oven-, vacuum-, and freeze-drying, vol.31, pp.1467-1477, 2001.

L. J. Gauckler, T. Graule, and F. Baader, Ceramic forming using enzyme catalyzed reactions, Materials Chemistry and Physics, issue.1, pp.78-102, 1999.

D. Gelard, When physics revisit earth construction: Recent advances in the understanding of the cohesion mechanisms of earthen materials, Proceedings of the International Symposium on Earthen Structures. IIS, 2007.

H. Giesche, Mercury Porosimetry: A General (Practical) Overview. Particle & Particle Systems Characterization, vol.23, pp.9-19, 2006.

G. T. Grant, Biological interactions between polysaccharides and divalent cations: The egg-box model, FEBS Letters, vol.32, issue.1, pp.195-198, 1973.

H. Grasdalen, B. Larsen, and O. Smidsrød, A p.m.r. study of the composition and sequence of uronate residues in alginates, Carbohydrate Research, vol.68, issue.1, pp.23-31, 1979.

J. E. Gregor, Interactions of calcium and aluminium ions with alginate, Water Research, vol.30, issue.6, pp.1319-1324, 1996.

T. Harada, Synthesis, swelling behavior and surface microstructure of poly(sodium acrylate) gels cross-linked by aluminum ions, European Polymer Journal, vol.41, issue.9, pp.2189-2198, 2005.

U. N. Hareesh, Colloidal Shaping of Alumina Ceramics by Thermally Induced Gelation of Methylcellulose, Journal of the American Ceramic Society, vol.94, issue.3, pp.749-753, 2011.

R. M. Hassan, Alginate polyelectrolyte ionotropic gels 7. Physico-chemical studies on silver(I) alginate complex with special attention to the electrical conductance and geometrical structure, Colloids and Surfaces, vol.60, pp.203-212, 1991.

A. Haug and O. Smidsrod, The effect of divalent metals on the properties of alginate solutions. II. Comparison of different metal ions, Acta chem. scand, vol.19, issue.2, 1965.

W. E. Hennink and C. F. Van-nostrum, Novel crosslinking methods to design hydrogels, Advanced Drug Delivery Reviews, vol.54, issue.1, pp.13-36, 2002.

D. Hesselbarth, Mechanical Properties of Coagulated Wet Particle Networks with AlkaliSwellable Thickeners, Journal of the American Ceramic Society, vol.84, issue.8, pp.1689-1695, 2001.

N. Huang, Rhéologie des pâtes granulaires, 2006.

, INSA Lyon, tous droits réservés Bibliographie Thèse Alban, p.206

R. D. Irani and C. F. Callis, Calcium and magnesium sequestration by sodium and potassium polyphosphates, Journal of the American Oil Chemists Society, vol.39, issue.3, pp.156-159, 1962.

M. A. Janney, Development of Low-Toxicity Gelcasting Systems, Journal of the American Ceramic Society, vol.81, issue.3, pp.581-591, 1998.

M. A. Janney, Method for molding ceramic powders, 1990.

Y. Jia, Y. Kanno, and Z. Xie, New gel-casting process for alumina ceramics based on gelation of alginate, Journal of the European Ceramic Society, vol.22, issue.12, pp.1911-1916, 2002.

Y. Jia, Y. Kanno, and Z. Xie, Fabrication of alumina green body through gelcasting process using alginate, Materials Letters, vol.57, pp.2530-2534, 2003.

S. B. Johnson, D. E. Dunstan, and G. V. Franks, Rheology of Cross-Linked Chitosan-Alumina Suspensions Used for a New Gelcasting Process, Journal of the American Ceramic Society, vol.85, issue.7, pp.1699-1705, 2002.

Y. S. Jung, Consolidation of aqueous concentrated silicon nitride suspension by direct coagulation casting, Materials Science and Engineering: A, vol.342, issue.1-2, pp.93-100, 2003.

G. M. Kavanagh and S. B. Ross-murphy, Rheological characterisation of polymer gels, Progress in Polymer Science, vol.23, issue.3, pp.533-562, 1998.

K. H. Khayat, Viscosity-enhancing admixtures for cement-based materials-An overview. Cement and Concrete Composites, vol.20, pp.171-188, 1998.

H. Kong, K. Y. Lee, and D. J. Mooney, Decoupling the dependence of rheological/mechanical properties of hydrogels from solids concentration, Polymer, vol.43, issue.23, pp.6239-6246, 2002.

E. De-kort, Calcium-binding capacity of organic and inorganic ortho-and polyphosphates, Dairy Sci. Technol, vol.89, pp.283-299, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00895800

C. K. Kuo and P. X. Ma, Ionically crosslinked alginate hydrogels as scaffolds for tissue engineering: Part 1. Structure, gelation rate and mechanical properties, Biomaterials, vol.22, issue.6, pp.511-521, 2001.

M. Lachemi, Self-consolidating concrete incorporating new viscosity modifying admixtures, Cement and Concrete Research, vol.34, issue.6, pp.917-926, 2004.

Y. Lamy, Nanostructuration de résines polyester insaturé par des copolymères à blocs: application aux composites SMC et BMC, 2012.

G. Landrou, Lime as an Anti-Plasticizer for Self-Compacting Clay Concrete, Materials, vol.9, issue.5, p.330, 2016.

R. Laucournet, Coagulation Method of Aqueous Concentrated Alumina Suspensions by Thermal Decomposition of Hydroxyaluminum Diacetate, Journal of the American Ceramic Society, vol.83, issue.11, pp.2661-2667, 2000.

A. Lefebvre, Process for erecting at least one vertical wall made from earth. FR Patent 2964991, 2012.

J. A. Lewis, Colloidal Processing of Ceramics, Journal of the American Ceramic Society, vol.83, issue.10, pp.2341-2359, 2000.

O. Lyckfeldt, J. Brandt, and S. Lesca, Protein forming-a novel shaping technique for ceramics, Journal of the European Ceramic Society, vol.20, pp.2551-2559, 2000.

J. Ma and Z. Xie, Gelcasting of alumina ceramic components in nontoxic Na-alginateCaIO3-PVP systems, Materials & Design, vol.26, issue.4, pp.291-296, 2005.

J. Ma and Z. Yi, Gelcasting of alumina with a mixed PVP-MAM system, Ceramics International, issue.7, pp.1015-1019, 2005.

M. Mancini, M. Moresi, and R. Rancini, Mechanical properties of alginate gels: empirical characterisation, Journal of Food Engineering, vol.39, issue.4, pp.369-378, 1999.

X. Mao, Rheological characterization of a gelcasting system based on epoxy resin, Ceramics International, vol.35, issue.1, pp.415-420, 2009.

A. Martinsen, G. Skjåk-braek, and O. Smidsrød, Alginate as immobilization material: I. Correlation between chemical and physical properties of alginate gel beads, Biotechnology and Bioengineering, vol.33, issue.1, pp.79-89, 1989.

F. Mcgregor, The moisture buffering capacity of unfired clay masonry, Building and Environment, vol.82, pp.599-607, 2014.

J. Mewis and N. J. Wagner, Thixotropy. Advances in Colloid and Interface Science, pp.214-227, 2009.

A. J. Millán, M. I. Nieto, and R. Moreno, Aqueous Gel-Forming of Silicon Nitride Using Carrageenans, Journal of the American Ceramic Society, vol.84, issue.1, pp.62-64, 2001.

Y. Millogo, Experimental analysis of Pressed Adobe Blocks reinforced with Hibiscus cannabinus fibers. Construction and Building Materials, 52, pp.71-78, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01850750

J. L. Minatti, Alumina developed by pre-gelling starch consolidation (PSC), Journal of the European Ceramic Society, vol.29, issue.4, pp.661-668, 2009.

M. Moevus, Earthen construction: an increase of the mechanical strength by optimizing the dispersion of the binder phase. Materials and Structures, pp.1-14, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01159955

M. Moevus, Environmental Clay Concrete (B.A.E), Scientific Report, 2013.

Ý. A. Mørch, I. Donati, and B. L. Strand, Effect of Ca2+, Ba2+, and Sr2+ on Alginate Microbeads, Biomacromolecules, vol.7, issue.5, pp.1471-1480, 2006.

J. C. Morel, Earth construction: Lessons from the past for future eco-efficient construction, Construction and Building Materials, vol.44, pp.419-421, 2013.
URL : https://hal.archives-ouvertes.fr/hal-01744382

S. L. Morissette and J. A. Lewis, Chemorheology of Aqueous-Based Alumina-Poly(vinyl alcohol) Gelcasting Suspensions, Journal of the American Ceramic Society, vol.82, issue.3, pp.521-528, 1999.

C. Morlay, Potentiometric study of Cu(II) and Ni(II) complexation with two high molecular weight poly(acrylic acids), Talanta, issue.6, pp.1177-1188, 1998.

J. W. Nicholson, Chemistry of glass-ionomer cements: a review, Biomaterials, vol.19, issue.6, pp.485-494, 1998.

E. K. Oikonomou, Time-dependent Cu2+-induced gelation of poly(ethylene-alt-maleic acid) in aqueous solution, European Polymer Journal, vol.45, issue.12, pp.3426-3432, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00566884

E. K. Oikonomou, G. Bokias, and J. K. Kallitsis, Comparative study of electrostatic binding vs. complexation of Cu2+ ions with water-soluble polymers containing styrene sulphonic acid and/or maleic acid units or their sodium salt forms, Journal of Polymer Science Part B: Polymer Physics, vol.46, issue.12, pp.1149-1158, 2008.

S. M. Olhero, Synergy of polysaccharide mixtures in gelcasting of alumina, Journal of the European Ceramic Society, vol.20, issue.4, pp.423-429, 2000.

O. O. Omatete, M. A. Janney, and S. D. Nunn, Gelcasting: From laboratory development toward industrial production, Journal of the European Ceramic Society, vol.17, issue.2-3, pp.407-413, 1997.

O. O. Omatete, M. A. Janney, and R. A. Strehlow, Gelcasting: a new ceramic forming process, American Ceramic Society Bulletin, vol.70, issue.10, pp.1641-1649, 1991.

T. Alban, , p.208

S. J. Omelon and M. D. Grynpas, Relationships between Polyphosphate Chemistry, Biochemistry and Apatite Biomineralization, Chemical Reviews, vol.108, issue.11, pp.4694-4715, 2008.

C. M. Ouellet-plamondon and G. Habert, Self-Compacted Clay based Concrete (SCCC): proof-ofconcept, Journal of Cleaner Production, vol.117, pp.160-168, 2016.

C. Ouwerx, Physico-chemical properties and rheology of alginate gel beads formed with various divalent cations, Polymer Gels and Networks, vol.6, issue.5, pp.393-408, 1998.

G. Ovarlez and P. Coussot, Physical age of soft-jammed systems, Physical Review E, vol.76, issue.1, p.11406, 2007.

F. Pacheco-torgal and S. Jalali, Earth construction: Lessons from the past for future ecoefficient construction, Construction and Building Materials, vol.29, pp.512-519, 2012.

V. Palluault, Nouveaux traitements de surface respectueux de l'environnement par des gels polymères réticulables: application à la préparation des surfaces d'usage dans le secteur aéronautique, 2010.

P. Pathomrungsiyounggul, A. S. Grandison, and M. J. Lewis, Effects of Calcium Chloride and Sodium Hexametaphosphate on Certain Chemical and Physical Properties of Soymilk, Journal of Food Science, vol.72, issue.8, pp.428-434, 2007.

F. Peng, Redox-Responsive Gel?Sol/Sol?Gel Transition in Poly(acrylic acid) Aqueous Solution Containing Fe(III) Ions Switched by Light, Journal of the American Chemical Society, vol.130, issue.48, pp.16166-16167, 2008.

K. Prabhakaran and R. Sooraj, A new direct coagulation casting process for alumina slurries prepared using poly(acrylate) dispersant, Ceramics International, vol.35, issue.3, pp.979-985, 2009.

K. Prabhakaran and A. Melkeri, Direct coagulation casting of YSZ powder suspensions using MgO as coagulating agent, Ceramics International, vol.35, issue.4, pp.1487-1492, 2009.

K. Prabhakaran and C. S. Kumbhar, Effect of Concentration of Ammonium Poly(acrylate) Dispersant and MgO on Coagulation Characteristics of Aqueous Alumina Direct Coagulation Casting Slurries, Journal of the American Ceramic Society, vol.91, issue.6, pp.1933-1938, 2008.

K. Prabhakaran and R. Sooraj, Heterocoagulation moulding of alumina powder suspensions prepared using citrate dispersant, Ceramics International, vol.36, issue.1, pp.1-8, 2010.

K. Prabhakaran and K. Joseph, Magnesia induced coagulation of aqueous PZT powder suspensions for direct coagulation casting, Ceramics International, vol.36, issue.7, pp.2095-2101, 2010.

K. Prabhakaran and S. P. Tambe, Mechanical Properties of Wet-Coagulated Alumina Bodies Prepared by Direct Coagulation Casting Using a MgO Coagulating Agent, Journal of the American Ceramic Society, vol.91, issue.11, pp.3608-3612, 2008.

K. Prabhakaran and S. Raghunath, Novel Coagulation Method for Direct Coagulation Casting of Aqueous Alumina Slurries Prepared Using a Poly(Acrylate) Dispersant, Journal of the American Ceramic Society, vol.91, issue.2, pp.615-619, 2008.

D. Quemada, Rheological modelling of complex fluids. I. The concept of effective volume fraction revisited, Eur. Phys. J. AP, vol.1, issue.1, pp.119-127, 1998.

R. Rahbari and J. Francois, Interactions between aluminium ions and acrylic acid-acrylamide copolymers in aqueous solution: 3. Influence of ionic strength on gelation and phase separation, Polymer, vol.33, issue.7, pp.1449-1458, 1992.

M. Rastello-de-boisseson, Microparticules d'alginates associatifs : élaboration, caractérisation et encapsulation des molécules actives, 2002.

B. R. Reddy, Encapsulated chemicals for use in controlled time release applications and methods. US Patent 6554071, 2003.

, INSA Lyon, tous droits réservés Bibliographie Thèse Alban, p.209

C. Rode, Moisture buffering of building materials, 2005.

I. Santacruz, M. I. Nieto, and R. Moreno, Alumina bodies with near-to-theoretical density by aqueous gelcasting using concentrated agarose solutions, Ceramics International, vol.31, issue.3, pp.439-445, 2005.

I. Santacruz, M. I. Nieto, and R. Moreno, Rheological Characterization of Synergistic Mixtures of Carrageenan and Locust Bean Gum for Aqueous Gelcasting of Alumina, Journal of the American Ceramic Society, vol.85, issue.10, pp.2432-2436, 2002.

H. Sato, Effects of repeated water exchange on the swelling behavior of poly(sodium acrylate) gels crosslinked by aluminum ions, Journal of Polymer Science Part B: Polymer Physics, vol.43, issue.7, pp.753-763, 2005.

D. T. Sawyer, Metal-Gluconate Complexes, Chemical Reviews, vol.64, issue.6, pp.633-643, 1964.
DOI : 10.1021/cr60232a003

G. L. Schneider, Method of stabilizing soils. US Patent 4022633, 1977.

W. Si, Direct Coagulation Casting of Silicon Carbide Components, Journal of the American Ceramic Society, vol.82, issue.5, pp.1129-1136, 1999.

W. M. Sigmund, N. S. Bell, and L. Bergström, Novel Powder-Processing Methods for Advanced Ceramics, Journal of the American Ceramic Society, vol.83, issue.7, pp.1557-1574, 2000.

G. Skják-braek, O. Smidsrød, and B. Larsen, Tailoring of alginates by enzymatic modification in vitro, International Journal of Biological Macromolecules, vol.8, issue.6, pp.330-336, 1986.

O. Smidsrød, Molecular basis for some physical properties of alginates in the gel state, Faraday discussions of the Chemical Society, vol.57, pp.263-274, 1974.

O. Smidsrod and K. I. Draget, Alginate gelation technologies, vol.192, pp.279-293, 1997.

O. Smidsrød and G. Skjåk-braek, Alginate as immobilization matrix for cells, TRENDS in Biotechnology, vol.8, issue.0, pp.71-78, 1990.

D. C. Smith, Development of glass-ionomer cement systems, Biomaterials, vol.19, issue.6, pp.467-478, 1998.

K. J. Sreeram, Y. Shrivastava, H. Nair, and B. U. , Studies on the nature of interaction of iron(III) with alginates, Biochimica et Biophysica Acta (BBA)-General Subjects, vol.1670, issue.2, pp.121-125, 2004.

B. T. Stokke, Distribution of uronate residues in alginate chains in relation to alginate gelling properties, Macromolecules, vol.24, issue.16, pp.4637-4645, 1991.

A. R. Studart, Gelling of Alumina Suspensions Using Alginic Acid Salt and Hydroxyaluminum Diacetate, Journal of the American Ceramic Society, vol.85, issue.11, pp.2711-2718, 2002.

E. Tervoort, Influence of Short-Chain Carboxylic Acids on the Mechanical Properties and Structure of Coagulated Alumina Suspensions, Journal of the American Ceramic Society, vol.88, issue.9, pp.2504-2509, 2005.

R. T. Thomson, Some properties of sodium hexametaphosphate, Analyst, issue.722, pp.320-323, 1936.

J. Tong and D. Chen, Preparation of alumina by aqueous gelcasting, Ceramics International, vol.30, issue.8, pp.2061-2066, 2004.

M. R. Torres, Extraction and physicochemical characterization of Sargassum vulgare alginate from Brazil, Carbohydrate Research, vol.342, issue.14, pp.2067-2074, 2007.

L. J. Vandeperre, A. M. De-wilde, and J. Luyten, Gelatin gelcasting of ceramic components, Journal of Materials Processing Technology, vol.135, issue.2-3, pp.312-316, 2003.

B. Venkatarama-reddy and P. Kumar, Embodied energy in cement stabilised rammed earth walls, Energy and Buildings, vol.42, issue.3, pp.380-385, 2010.

I. M. Vold, K. A. Kristiansen, and B. E. Christensen, A Study of the Chain Stiffness and Extension of Alginates, in Vitro Epimerized Alginates, and Periodate-Oxidized Alginates Using Size-Exclusion Chromatography Combined with Light Scattering and Viscosity Detectors, Biomacromolecules, vol.8, issue.8, p.2627, 2007.

F. T. Wall and J. W. Drenan, Gelation of polyacrylic acid by divalent cations, Journal of Polymer Science, vol.7, issue.1, pp.83-88, 1951.

F. T. Wall and S. J. Gill, Interaction of Cupric Ions with Polyacrylic Acid, The Journal of Physical Chemistry, vol.58, issue.12, pp.1128-1130, 1954.

L. Wang and F. Aldinger, Near-Net Shape Forming of Advanced Ceramics, Advanced Engineering Materials, vol.2, issue.3, pp.110-113, 2000.

X. Wang, Gelcasting of silicon carbide based on gelation of sodium alginate, Ceramics International, vol.28, issue.8, pp.865-871, 2002.

J. A. Williams and R. W. Billington, Changes in compressive strength of glass ionomer restorative materials with respect to time periods of 24 h to 4 months, Journal of Oral Rehabilitation, vol.18, issue.2, pp.163-168, 1991.

A. D. Wilson, A hard decade's work: steps in the invention of the glass-ionomer cement, Journal of dental research, vol.75, issue.10, pp.1723-1727, 1996.

Z. Xie, Ceramic forming based on gelation principle and process of sodium alginate, Materials Letters, vol.57, issue.9, pp.1635-1641, 2003.

Z. Xie, A new gel casting of ceramics by reaction of sodium alginate and calcium iodate at increased temperatures, Journal of Materials Science Letters, vol.20, issue.13, pp.1255-1257, 2001.

Z. Xie, Y. Chen, and Y. Huang, A novel casting forming for ceramics by gelatine and enzyme catalysis, Journal of the European Ceramic Society, vol.20, issue.3, pp.253-257, 2000.

J. Xu, Properties of Alumina Coagulated Bodies Prepared by Direct Coagulation Casting via High Valence Counter Ions (DCC-HVCI), Journal of the American Ceramic Society, vol.95, issue.11, pp.3415-3420, 2012.

J. Yang, J. Yu, and Y. Huang, Recent developments in gelcasting of ceramics, Journal of the European Ceramic Society, vol.31, issue.14, pp.2569-2591, 2011.

Y. Yang and W. M. Sigmund, Expanded percolation theory model for the temperature induced forming (TIF) of alumina aqueous suspensions, Journal of the European Ceramic Society, vol.22, issue.11, pp.1791-1799, 2002.

I. Ydens, Solution properties of well-defined 2-(dimethylamino)ethyl methacrylatebased (co)polymers: A viscometric approach, European Polymer Journal, vol.41, issue.7, pp.1502-1509, 2005.

A. C. Young, Gelcasting of Alumina, Journal of the American Ceramic Society, vol.74, issue.3, pp.612-618, 1991.

J. Yu, J. Yang, and Y. Huang, The transformation mechanism from suspension to green body and the development of colloidal forming, Ceramics International, vol.37, issue.5, pp.1435-1451, 2011.

J. Zhang, C. R. Daubert, and E. Allen-foegeding, A proposed strain-hardening mechanism for alginate gels, Journal of Food Engineering, vol.80, issue.1, pp.157-165, 2007.

J. Zhang, C. R. Daubert, and E. A. Foegeding, Fracture Analysis of Alginate Gels, Journal of Food Science, vol.70, issue.7, pp.425-431, 2005.