, hybride collée sous les conditions naturelles a été étudié mais l'influence de chaque agent environnemental (humidité, pluie, neige et le soleil (rayonnement UV, température)) sur ce comportement n'a pas été isolé. L'étude de l'influence de chacun de ces agents sur le comportement à long-terme des structures hybrides est donc nécessaire et doit faire l'objet d'analyses futures pour proposer des solutions efficaces permettant de réduire l'impact de ces agents sur leur durabilité et leur performance à long-terme
Influence of freeze-thaw cycling on the bond strength of steel-FRP lap joints, Composites Part B: Engineering, vol.60, pp.178-185, 2014. ,
Influence of moisture on the thermal and mechanical properties of autoclaved and oven-cured Kevlar-49/epoxy laminates, Composites science and technology, vol.57, issue.5, pp.565-571, 1997. ,
Bond strength of different strengthening systems-Concrete elements under freeze-thaw cycles and salt water immersion exposure, Construction and Building Materials, vol.70, pp.399-409, 2014. ,
URL : https://hal.archives-ouvertes.fr/hal-01297531
Viscoplastic analysis of structural polymer composites using stress relaxation and creep data, Composites Part B: Engineering, vol.32, issue.2, pp.165-170, 2001. ,
Subcritical debonding of FRP-to-concrete bonded interface under synergistic effect of load, moisture, and temperature, Mechanics of Materials, vol.92, pp.80-93, 2016. ,
Special finite elements for analysis of adhesive joints, In European Congress on Computational Methods in Applied Sciences and Engineering, 2000. ,
Two-and three-dimensional geometrical nonlinear finite elements for analysis of adhesive joints, International Journal of Adhesion and Adhesives, vol.21, issue.11, pp.17-34, 2001. ,
Mechanical properties of pultruded glass fiber-reinforced plastic after moistening, Composite Structures, vol.94, issue.9, pp.2914-2919, 2012. ,
Finite element predictions of composite-to-metal bonded joints with ductile adhesive materials, Composite Structures, vol.94, pp.2632-2639, 2012. ,
A general framework for continuum damage models. i. infinitesimal plastic damage models in stress space, International Journal of Solids and Structures, vol.37, pp.7409-7436, 2000. ,
An experimental study on the long-term behavior of CFRP pultruded laminates suitable to concrete structures rehabilitation, Composites Part B: Engineering, vol.39, issue.7, pp.1147-1150, 2008. ,
Creep phenomena in FRP materials, Mechanics Research Communications, vol.43, pp.15-21, 2012. ,
On the flexural behaviour of GFRP beams obtained by bonding simple panels: An experimental investigation, Composite Structures, vol.131, pp.55-65, 2015. ,
URL : https://hal.archives-ouvertes.fr/hal-01247913
Investigation of flexural behaviors of hybrid beams formed with GFRP box section and concrete, Construction and Building Materials, vol.41, pp.563-569, 2013. ,
Adhesion of polymers, Progress in polymer science, vol.34, pp.948-968, 2009. ,
Fiber-Reinforced Polymer Composites for Construction-State-of-the-Art Review, Journal of Composites for Construction, vol.6, issue.2, pp.73-87, 2002. ,
Adhesion phenomena in bonded joints, International Journal of Adhesion and Adhesives, vol.38, pp.95-116, 2012. ,
Shear coefficients for thin-walled composite beams. Composite Structures, Composite Structures, vol.8, issue.1, pp.47-61, 1987. ,
A beam theory for thin-walled composite beams, Composites Science and Technology, vol.32, issue.4, pp.265-277, 1988. ,
A modified beam theory for bending and twisting of open-section composite beams-numerical verification, Flexural and shear moduli of full-section fiber reinforced plastic (FRP) pultruded beams, vol.17, pp.29-39, 1989. ,
Composites for construction: structural design with FRP materials, 2006. ,
Strength prediction of adhesive joints using the modified damage zone theory, Composite structures, vol.86, pp.96-100, 2008. ,
The durability of adhesive joints in the presence of water, International Journal of Adhesion and Adhesives, vol.16, issue.2, pp.73-79, 1996. ,
Prediction of concrete creep effects using age-adjusted effective modulus method, ACI journal, vol.69, issue.4, pp.212-217, 1972. ,
Rate-type creep law of aging concrete based on Maxwell chain, Matériaux et Construction, vol.7, issue.37, pp.45-60, 1974. ,
Theory of creep and shrinkage in concrete structures: A precis of recent developments, Mechanics today, vol.2, pp.1-93, 1975. ,
Can the creep curves for different loading ages diverge?, Cement and Concrete Research, vol.8, issue.5, pp.601-611, 1978. ,
Approximate relaxation function for concrete, Journal of the structural division, vol.105, issue.ST12, pp.2695-2705, 1979. ,
Mathematical Modeling of creep and Shrinkage of Concrete, Material Models for Structural Analysis, pp.99-215, 1988. ,
Solidification theory for concrete creep. II: Verification and application, Journal of Engineering Mechanics, vol.115, issue.14, pp.1704-1725, 1989. ,
Preliminary guidelines and recommendation for characterizing creep and shrinkage in structural design codes, 5th international RILEM symposium on creep and shrinkage of concrete, vol.123, pp.1195-1201, 1993. ,
Improved estimation of long-term relaxation function from compliance function of aging concrete, Journal of Engineering Mechanics, vol.139, issue.2, pp.146-152, 2013. ,
Accelerated ageing behaviour of the adhesive bond between concrete specimens and CFRP overlays, Construction and building materials, vol.25, pp.523-538, 2011. ,
URL : https://hal.archives-ouvertes.fr/hal-00594585
Vieillissement hygrothermique d'un assemblage acier galvanisé/adhésif époxy : évolution de la tenue mécanique en fonction de l'état physico-chimique de l'adhésif, International Journal of Adhesion and Adhesives, vol.29, issue.7, pp.75-83, 2008. ,
Modelling GFRP-to-concrete joints with interface finite elements with rupture based on the Mohr-Coulomb criterion, Construction and Building Materials, vol.18, pp.1554-1568, 1998. ,
An experimental study of GFRP-to-concrete interfaces submitted to humidity cycles, Composite Structures, vol.110, pp.354-368, 2014. ,
Etude du vieillissement des liaisons adhésives en milieu marin pour application offshore, 2009. ,
A finite element model for linear viscoelastic behaviour of pultruded thin-walled beams under general loadings, International Journal of Solids and Structures, vol.45, issue.3, pp.770-793, 2008. ,
Creep tests on GFRP pultruded specimens subjected to traction or shear, Composite Structures, vol.108, pp.514-523, 2014. ,
Contribution à l'étude expérimentale et théorique de structures mixtes acierbéton assemblées par collage, 2005. ,
Experimental study of bonded steel concrete composite structures, Journal of Constructional Steel Research, vol.63, issue.9, pp.1268-1278, 2007. ,
URL : https://hal.archives-ouvertes.fr/hal-02061608
Durabilité des assemblages collés : Modélisation mécanique et physicochimique, École nationale des ponts et chaussées, 2004. ,
Dégradation thermique et fluage d'un adhésif structural époxyde, 2000. ,
Modélisation du comportement mécanique des poutres mixtes sous charges modérées : réponse élastique et comportement au cours du temps, 2003. ,
Strength prediction of single-and double-lap joints by standard and extended finite element modelling, International Journal of Adhesion and Adhesives, vol.31, issue.15, pp.363-372, 2011. ,
DOI : 10.1016/j.ijadhadh.2010.09.008
URL : http://recipp.ipp.pt/bitstream/10400.22/4288/4/ART_RaulCampilho_2011_CIDEM.pdf
An investigation of the composite action of an FRP/concrete prismatic beam, Construction and Building Materials, vol.13, pp.417-426, 1999. ,
Ageing of pultruded glass fibre reinforced polymer composites exposedto combined environmental agents, Composite Structures, vol.108, pp.1019-1026, 2014. ,
DOI : 10.1016/j.compstruct.2013.10.042
Standard finite element techniques for efficient stress analysis of adhesive joints, International Journal of Adhesion and Adhesives, vol.29, issue.12, pp.125-135, 2009. ,
DOI : 10.1016/j.ijadhadh.2008.01.005
Failure analysis of bonded T-peel joints: Efficient modelling by standard finite elements with experimental validation, International Journal of Adhesion and Adhesives, vol.30, issue.15, pp.306-312, 2010. ,
DOI : 10.1016/j.ijadhadh.2009.10.004
Durability of concrete beams externally reinforced with composite fabrics, Construction and building Materials, vol.19, pp.141-148, 1995. ,
DOI : 10.1016/0950-0618(95)00006-2
Conception et dimensionnement d'un ancrage de hauban plat en matériaux composites, 2008. ,
Endommagement anisotrope et comportement dynamique des structures en béton armé jusqu'à la ruine, 2009. ,
On the finite element modelling of RC beams shearstrengthened with FRP, Construction and Building Materials, vol.32, pp.13-26, 2012. ,
Structural design of polymer composites: Eurocomp design code and background document, 2003. ,
Collage des matériaux-Mécanismes. Classification des colles, Techniques de l'ingénieur, BM7615, 2002. ,
Bond strength of CFRP-concrete elements under freezethaw cycles, Composite Structures, vol.92, issue.4, pp.973-983, 2010. ,
DOI : 10.1016/j.compstruct.2009.09.044
Moisture cure of adhesives and sealants, International journal of adhesion and adhesives, vol.18, issue.4, pp.247-253, 1998. ,
DOI : 10.1016/s0143-7496(97)00031-6
Flexural behaviour of GFRP-concrete hybrid beams with interconnection slip, Composite Structures, vol.77, pp.66-78, 2007. ,
DOI : 10.1016/j.compstruct.2005.06.003
GFRP_concrete hybrid cross-sections for floors of buildings, Engineering Structures, vol.31, issue.6, pp.1331-1343, 2009. ,
DOI : 10.1016/j.engstruct.2008.04.021
Tensile creep of a structural epoxy adhesive: Experimental and analytical characterization, International Journal of Adhesion and Adhesives, vol.59, pp.115-124, 2015. ,
DOI : 10.1016/j.ijadhadh.2015.02.006
URL : https://manuscript.elsevier.com/S0143749615000317/pdf/S0143749615000317.pdf
Fluage et relaxation du béton. Techniques de l'ingénieur. Construction, 1986. ,
Energies libres de surface des solides et des liquides : une approche de la compréhension des phénomènes interfaciaux, Compte-rendu des Journées Scinetifiques du (RF), 2003. ,
Analyse et modélisation du comportement non linéaire d'assemblages collés pour application marine, Ecole Nationale Supérieure des Ingénieurs des Etudes et Techniques d'Armement (ENSIETA), 2008. ,
Application of a stress return algorithm for elasto-plastic hardening-softening models with high yield surface curvature, Proceedings of European Congress on Computational Methods in Applied Sciences and Engineering, 2000. ,
Analysis and design of pultruded FRP shapes under bending, Composites Part B: Engineering, vol.27, issue.3-4, pp.295-305, 1996. ,
Continuum models for discontinuous media, Fracture Processes in Concrete, Rock and Ceramics: Proc. Int. RILEM/ESIS Conf, pp.601-618, 1991. ,
System ductility and redundancy of FRP structures with ductile adhesively-bonded joints, 2005. ,
Innovative Design of FRP Combined with Concrete: short term behavior, Journal of Structural Engineering, vol.121, issue.7, pp.1069-1078, 1995. ,
Low-temperature and freeze-thaw durability of thick composites, Composites Part B: Engineering, vol.27, issue.3-4, pp.371-379, 1996. ,
Creep rupture of a GFRP composite at elevated temperatures, Computers & Structures, vol.76, issue.1, pp.153-161, 2000. ,
A geometrically nonlinear model of the adhesive joint problem and its numerical treatment, Computer Methods in Applied Mechanics and Engineering, vol.96, issue.3, pp.329-350, 1992. ,
An overview of the technology of fibre-reinforced plastics for design purposes, Materials and Design, vol.19, pp.1-10, 1998. ,
Effect of sustained loading and environmental conditions on the creep behavior of an epoxy adhesive for concrete structures strengthened with CFRP laminates, Composites Part B: Engineering, vol.129, pp.88-96, 2017. ,
Effect of hygrothermal aging history on sorption process, swelling, and glass transition temperature in a particle-filled epoxy-based adhesive, Microelectronics Reliability, vol.49, pp.1581-1591, 2002. ,
Water effects on the bond strength of concrete/concrete adhesive joints, Construction and building materials, vol.20, pp.957-970, 2006. ,
Durability Issues and Challenges for Material Advancements in FRP Employed in the Construction Industry, Polymers, vol.10, issue.3, 2018. ,
Accelerated test methods to determine the long-term behavior of composite highway structures subject to environmental loading, Technology and Research, vol.20, issue.1, pp.38-50, 1998. ,
Modeling of structures subjected to impact: concrete behaviour under high strain rate, Cement and Concrete Composites, vol.25, pp.131-143, 2003. ,
URL : https://hal.archives-ouvertes.fr/hal-02083673
Damage plastic model for concrete failure, Computer Methods in Applied Mechanics and Engineering, vol.43, pp.7166-7196, 2006. ,
A three-dimensional finite element model for stress analysis of adhesive joints, International Journal of Adhesion and Adhesives, vol.22, issue.15, pp.357-365, 2002. ,
Dynamic response under pedestrian load of a GFRP-SFRSCC hybrid footbridge prototype: Experimental tests and numerical simulation, Durabilité des assemblages colles du génie civil : effets du vieillissement hygrothermique aux échelles micro-et macroscopiques, vol.53, pp.11-22, 2006. ,
Static, dynamic and creep behaviour of a full-scale GFRP-SFRSCC hybrid footbridge, Composite Structures, vol.118, pp.496-509, 2014. ,
Characterisation of the mechanical properties of pultruded fibre-reinforced polymer tube, Materials and Design, vol.53, pp.305-315, 2014. ,
Comparison of lap shear test specimens, Journal of Testing and Evaluation, vol.5, issue.2, pp.84-93, 1977. ,
Combined FRP Reinforcement and Permanent Formwork for Concrete Members, Journal of Composites for Constructions, vol.2, issue.2, pp.78-86, 1998. ,
DOI : 10.1061/(asce)1090-0268(1998)2:2(78)
Modélisation de l'endommagement des structures en béton : approches numériques et effet de la microstructure sur les propriétés de rupture, 2002. ,
Strength prediction of bonded single lap joints by non-linear finite element methods, International Journal of Adhesion and Adhesives, vol.4, issue.2, pp.65-78, 1984. ,
DOI : 10.1016/0143-7496(84)90103-9
Environmental durability of adhesively bonded FRP/steel joints in civil engineering applications: State of the art, Composites Part B: Engineering, vol.81, pp.259-275, 2015. ,
Durability of CFRP/steel joints under cyclic wet-dry and freeze-thaw conditions, Composites Part B, vol.126, pp.211-226, 2017. ,
DOI : 10.1016/j.compositesb.2017.06.011
The mathematical theory of plasticity, Creep behaviour of glass reinforced plastic box beams, vol.11, pp.79-85, 1950. ,
Advanced fiber reinforced polymer composites for sustainable civil infrastructures, Proceedings of the International Symposium on Innovation & Sustainability of Structures in Civil Engineering, 2011. ,
Durabilité des interfaces collées béton/renforts composites : développement d'une méthodologie d'étude basée sur un dispositif de fluage innovant conçu pour être couplé à un vieillissement hygrothermique, 2012. ,
New experiences with epoxies for structural applications, International Journal of Adhesion and Adhesives, vol.2, issue.2, pp.84-95, 1982. ,
DOI : 10.1016/0143-7496(82)90120-8
The use of advanced polymer composites to form an economic structural unit, Construction and Building Materials, vol.17, pp.55-68, 2003. ,
Relation endommagement permeabilité pour les bétons applications aux calculs de structures, 2004. ,
An elastic plastic damage formulation for concrete: Application to elementary tests and comparison with an isotropic damage model, Computer methods in applied mechanics and engineering, vol.195, issue.152, pp.7077-7092, 2006. ,
URL : https://hal.archives-ouvertes.fr/hal-00351799
Moisture diffusion in glass-fiber-reinforced polymer composite bridge under hot/wet environment, Composites Part B: Engineering, vol.45, issue.1, pp.407-416, 2013. ,
Caractérisation mécanique et outil d'aide au dimensionnement des collages structuraux, 2007. ,
Analyse et modélisation du comportement différé des ouvrages constitués de plusieurs matériaux, 1996. ,
Non-linear models for steel-concrete epoxy-bonded beams, Journal of Constructional Steel Research, vol.100, pp.108-121, 2014. ,
Durability study of pultruded CFRP plates immersed in water and seawater under sustained bending: Water uptake and effects on the mechanical properties, Composites Part B: Engineering, vol.70, pp.138-148, 2015. ,
Composites: calculating their embodied energy, 2009. ,
Durability gap analysis for fibre-reinforced polymer composites in civil infrastructure, Journal of composites for construction, vol.73, issue.3, pp.238-247, 2003. ,
Adhesively bonded lap joints from pultruded GFRP profiles. Part I: stress-strain analysis and failure modes, Composites Part B: Engineering, vol.36, issue.4, pp.331-340, 2005. ,
Experimental tests and analytical model of concreteGFRP hybrid beams under flexure, Composites Part A: Applied Science and Manufacturing, vol.38, issue.3, pp.192-210, 2007. ,
Hygrothermal aging of composite single lap shear specimens comprised of AF-555M adhesive and T800H/3900-2 adherends, International Journal of Adhesion and Adhesives, vol.39, pp.1-7, 2012. ,
DOI : 10.1016/j.ijadhadh.2012.06.009
An elasto-plastic damage model for reinforced concrete with minimum number of material parameters, Computers and Structures, vol.82, pp.1201-1215, 2004. ,
Approche non locale d'un modèle d'élasto-plastique endommagable pour le calcul des structures en béton, 2007. ,
Approximate expressions for the ageing coefficient and the relaxation function in the viscoelastic analysis of concrete structures, Materials and Structures, vol.29, issue.3, pp.131-140, 1996. ,
Characterization of the deterioration of externally bonded CFRP-concrete composites using quantitative infrared thermography, Cement and Concrete Composites, vol.32, issue.9, pp.740-746, 2010. ,
Mécanique des matériaux solides, 1991. ,
Water transport in epoxy resins, Progress in polymer science, vol.18, pp.947-961, 1993. ,
Plastic-damage model for cyclic loading of concrete structures, Journal of Engineering Mechanics, vol.124, pp.892-900, 1998. ,
DOI : 10.1061/(asce)0733-9399(1998)124:8(892)
Effects of environmental aging on the properties of pultruded GFRP, Composites Part B: Engineering, vol.30, issue.5, pp.485-493, 1999. ,
A finite element model of single-lap adhesive joints, International journal of solids and structures, vol.30, issue.12, pp.1679-1692, 1993. ,
Single lap shear stress in hybrid CFRP/Steel composites, Procedia Structural Integrity, vol.1, pp.58-65, 2016. ,
DOI : 10.1016/j.prostr.2016.02.009
URL : https://doi.org/10.1016/j.prostr.2016.02.009
Coupled plastic damaged model, Computer Methods in Applied Mechanics and Engineering, vol.129, pp.81-89, 1996. ,
DOI : 10.1016/0045-7825(95)00887-x
Mise en oeuvre des composites TP-Compounds à fibres continues, 2007. ,
Effect of diffusion control in the glass transition region on critical conversion at the gel point during curing of epoxy resins, POLYMER, vol.19, pp.931-933, 1978. ,
Parametric study of bonded steel-concrete composite beams by using finite element analysis, Engineering Structures, vol.34, pp.40-51, 2012. ,
DOI : 10.1016/j.engstruct.2011.08.036
A modified creep model of epoxy adhesive at ambient temperature, International Journal of Adhesion and Adhesives, vol.29, issue.4, pp.396-404, 2009. ,
DOI : 10.1016/j.ijadhadh.2008.07.010
Etude du vieillissement des assemblages structuraux acier/aluminium : influence de l'environnement sur le dimensionnement, 2007. ,
URL : https://hal.archives-ouvertes.fr/tel-00273203
Adhesive-bonded steel/concrete composite construction, International Journal of Adhesion and Adhesives, vol.2, issue.2, pp.103-107, 1982. ,
DOI : 10.1016/0143-7496(82)90122-1
Continuum damage theory-application to concrete, Journal of Engineering Mechanics ASCE, vol.115, pp.345-365, 1989. ,
DOI : 10.1061/(asce)0733-9399(1989)115:2(345)
analyse multi-échelle des connexions par collage application aux éléments structuraux multi-matériaux fléchis, 2012. ,
Development of a pedestrian bridge with GFRP profiles and fiber reinforced self-compacting concrete deck, Composite Structures, vol.93, issue.11, pp.2969-2982, 2011. ,
Application of fiber reinforced polymer composites to the highway infrastructure, 2003. ,
vAnisotropic modeling of cracked concrete based on plasticitydamage theory, Computational Plasticity, CIMNE, pp.1543-1550, 1997. ,
Full-section properties of pultruded FRP profiles using bending tests, 2012. ,
Creep and recovery of a pultruded FRP frame", In advanced composite materials for civil engineering structures, pp.24-35, 1991. ,
Short-and long-term structural properties of pultruded beam assemblies fabricated using adhesive bonding, Composite Structures, vol.25, issue.1-4, pp.387-395, 1993. ,
Does performance-based design with fibre reinforced polymer components and structures provide any new benefits and challenges?, The Structural Engineer, vol.89, pp.23-27, 2011. ,
Surface modification of aluminium alloys by atmospheric pressure plasma treatments for enhancement of their adhesion properties, Surface and Coatings Technology, vol.312, pp.32-36, 2016. ,
Influence of aggressive exposure conditions on the behaviour of adhesive bonded concrete-GFRP joints, Construction and Building Materials, vol.12, pp.427-446, 1998. ,
Flexural behaviour of multicelled GFRP composite beams with concrete infill: Experiment and theoretical analysis, Composite Structures, vol.159, pp.21-33, 2017. ,
Experimental study of GFRP-concrete hybrid beams with low degree of shear connection, Construction and Building Materials, vol.101, pp.141-151, 2015. ,
Modèle d'endommagement des assemblages collés : Identification et application à la description d'un essai de vieillissement accéléré, École nationale des ponts et chaussées, 2008. ,
Time-dependent behaviour of steel/CFRP double strap joints subjected to combined thermal and mechanical loading, Journal of Constructional Steel Research, vol.65, issue.1, pp.1826-1833, 1909. ,
Flexural stiffness characterization of fiber reinforced plastic (FRP) pultruded beams, Composite Structures, vol.81, pp.274-282, 2007. ,
Mécanique de l'endommagement. Théorie du premier gradient et application au béton, 1995. ,
Durability of the adhesive bond between continuous fibre sheet reinforcements and concrete in an outdoor environment, Construction and Building Materials, vol.25, pp.515-522, 2011. ,
Testing of hybrid FRP composite beams in bending, Composites Part B: Engineering, vol.35, issue.1, pp.27-33, 2004. ,
Three-dimensional nonlinear analysis of adhesively bonded lap joints considering viscoplasticity in adhesives, Computers & Structures, vol.79, issue.7, pp.769-783, 2001. ,
Nonlocal damage theory, Journal of engineering mechanics, vol.113, issue.110, pp.1512-1533, 1987. ,
Durabilité en milieu humide d'assemblages structuraux collées type aluminium/composite, 2005. ,
, Effects of Ageing on the Bond Properties of Carbon Fiber Reinforced Polymer/Concrete Adhesive Joints: Investigation Using a Modified Double Shear Test, vol.45, pp.1920-1932, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01569451
Théorie de dégradation du béton et développement d'un nouveau modèle d'endommagement en formulation incrémentale tangente. Calcul à la rupture et application au cas des chevilles de fixation ancrées dans le béton, 2003. ,
Analysis of composite bonded joints, Fibre Science and Technology, vol.17, issue.2, pp.77-90, 1982. ,
Non-linear analysis of adhesively bonded joints, International journal of non-linear mechanics, vol.23, issue.2, pp.97-112, 1988. ,
DOI : 10.1016/0020-7462(88)90017-0
Strength prediction of adhesively bonded joints using plastic zone, Procedia Engineering, vol.173, pp.1635-1641, 2017. ,
Creep behavior of pultruded GFRP elements-Part 1: Literature review and experimental study, Composite Structures, vol.93, issue.10, pp.2450-2459, 2011. ,
Creep behavior of pultruded GFRP elements-Part 2: Analytical study, Composite Structures, vol.93, issue.9, pp.2409-2418, 2011. ,
Flexural creep response of pultruded GFRP deck panels: Proposal for obtaining full-section viscoelastic moduli and creep coefficients, Composites Part B: Engineering, vol.98, pp.213-224, 2016. ,
Viscoélasticité pour le calcul des structures, Editions Ecole Polytechnique, 2009. ,
Effect of Moisture on GFRP Composite Materials, Materials Today: Proceedings, vol.2, pp.2902-2908, 2015. ,
DOI : 10.1016/j.matpr.2015.07.252
Finite-thickness cohesive elements for modeling thick adhesives, Engineering Fracture Mechanics, vol.168, pp.105-113, 2016. ,
DOI : 10.1016/j.engfracmech.2016.03.020
Compression creep of a pultruded E-glass/vinylester composite, Composites Science and Technology, vol.58, issue.8, pp.1361-1369, 1998. ,
DOI : 10.1016/s0266-3538(98)00009-8
Modification of metal surfaces by microwave plasma at atmospheric pressure, Surface and Coatings Technology, vol.201, issue.9, pp.4939-4942, 2007. ,
DOI : 10.1016/j.surfcoat.2006.07.073
Static behaviour of steel concrete beam connected by bonding, Engineering Structures, vol.29, pp.1034-1042, 2007. ,
Degradation of bond between FRP and RC beams, Composite structures, vol.85, issue.2, pp.164-174, 2008. ,
DOI : 10.1016/j.compstruct.2007.10.014
Concrete to steel lap joint failure criteria under combined shear and peeling stress, Journal of constructional steel research, vol.65, issue.2, pp.386-394, 2009. ,
Viscoelastic response of an epoxy adhesive for construction since its early ages: Experiments and modelling, Composites Part B: Engineering, vol.116, issue.1, pp.173-187, 1987. ,
DOI : 10.1016/j.compositesb.2016.10.047
Development of Fibre-Reinforced Polymer Composites in Building Construction, Second International Conference on Sustainable Construction Materials and Technologies, 2010. ,
Effects of thermal cycles on the mechanical response of pultruded GFRP profiles used in civil engineering applications, Composite Structures, vol.116, pp.720-731, 2014. ,
Experimental and numerical investigation of the static response of environmentally aged adhesively bonded joints, International Journal of Adhesion and Adhesives, vol.40, pp.224-237, 2013. ,
Adhesives in construction: a contractor's viewpoint, International Journal of Adhesion and Adhesives, vol.2, issue.2, pp.73-76, 1982. ,
Réhabilitation du béton armé dégradé par la corrosion, Association Française de Génie Civil (AFGC) & CEntre FRAnçais de la CORrosion (CEFRACOR), 2003. ,
Special finite elements for modelling adhesively bonded joints in two-and threedimensions, 1996. ,
Du béton frais au béton durci : Eléments de comportement, 2009. ,
Durability characteristics of concrete beams externally bonded with FRP composite sheets, Cement and Concrete Composites, vol.19, pp.351-358, 1997. ,
DOI : 10.1016/s0958-9465(97)00028-0
étude expérimentale des éléments structuraux multi-matériaux collés sollicités en flexion effet du fluage, fatigue et durabilité, 2014. ,
Contribution à l'étude du comportement mécanique et hydromécanique du béton, 2009. ,
An evaluation of analytical and numerical solutions to the single-lap joint, International Journal of Solids and Structures, vol.31, issue.18, pp.2537-2563, 1994. ,
Deterioration of FRP/concrete bond system under variable moisture conditions quantified by fracture mechanics, Composites Part B: Engineering, vol.42, pp.145-154, 2011. ,
DOI : 10.1016/j.compositesb.2010.11.002
A damage model for the simulation of delamination in advanced composites under variable-mode loading, Mechanics of Materials, vol.38, pp.1072-1089, 2006. ,
Time-temperature superposition for polymeric blends, Rheology Bulletin, vol.67, issue.1, pp.5-8, 1998. ,
An Australian Approach to Fiber Composite Bridges, 2002. ,
Stress concentration factors for bonded lap joint, Journal of Aircraft, vol.8, pp.817-820, 1971. ,
The effect of diffusion of water into epoxy resins and their carbon-fibre reinforced composites, Composites, vol.12, pp.201-205, 1981. ,
An energy release rate-based plastic-damage model for concrete, International Journal of Solids and Structures, vol.43, pp.583-612, 2006. ,
DOI : 10.1016/j.ijsolstr.2005.05.038
URL : https://doi.org/10.1016/j.ijsolstr.2005.05.038
Measurement of adhesive joint fracture properties as a function of environmental degradation, International Journal of Adhesion and Adhesives, vol.18, issue.4, pp.237-246, 1998. ,
Swelling of DGEBA/DDA epoxy resin during hygrothermal ageing, Polymer, vol.39, issue.14, pp.3253-3260, 1998. ,
DOI : 10.1016/s0032-3861(97)10060-x
Moisture diffusion and hygrothermal aging of pultruded glass fiber reinforced polymer laminates in bridge application, Composites Part B: Engineering, vol.100, pp.197-207, 2016. ,
DOI : 10.1016/j.compositesb.2016.04.085
Viscoelastic analysis of adhesively bonded joints, Computers & structures, vol.27, issue.4, pp.445-454, 1987. ,
DOI : 10.1016/0045-7949(87)90275-6
On the characterization of tensile creep resistance of polyamide 66 nanocomposites. Part II: Modeling and prediction of long-term performance, Polymer, vol.47, issue.19, pp.6745-6758, 2006. ,
A Novel Composite Emergency Bridge for Disaster Rescue, The 15th World Conference on Earthquake Engineering (15WCEE), 2012. ,
Diffusion of water into an epoxy adhesive: comparison between bulk behaviour and adhesive joints, International Journal of Adhesion and Adhesives, vol.15, issue.3, pp.5513-5522, 1995. ,
DOI : 10.1016/0143-7496(95)91624-f