A. Nahhas and F. , Comportement thermo-mécanique des murs en maçonnerie de blocs creux en béton sous l'action d'un feu conventionnel, s.l, 2004.

A. Najim and A. , Modèlisation et simulation du comportement du béton sous hautes températures par une approche thermo-hygro-mécanique couplée. Application à des situations accidentelles, s.l, 2004.

M. Alshaaer, Evaluation of a low temperature hardening Inorganic Phosphate Cement for high-temperature applications, Cement and Concrete Research, vol.41, pp.38-45, 2011.

J. Ambroise, J. Dejean, J. Foumbi, and J. Pera, Metakaoline blended cement improve GRC durability and ductility, Construction and Building Materials, vol.3, pp.73-77, 1989.

A. Badanoiu and J. Holmegren, Cementitious composites reinforced with continuous carbon fibers for strengthening of concrete structures. Cement and Concrete Composites, vol.25, pp.387-394, 2003.

P. Balaguru and S. P. Shah, Fiber Reinforced Cement Composites, 1992.

P. Bamonte and R. Felicetti, On tensile behavior of thermally-damaged concrete, Proceedings of the 6th International conference on Fracture Mechanics of Concrete and Concrete Structure-FraMCoS6, 2007.

N. Banthia and R. Gupta, Hybrid fiber reinforced concrete (HyFRC) : fiber synergy in high strength matrices, Materials and Structures, vol.37, pp.707-716, 2004.

R. Barhum and V. Mechtcherine, Effect of short, dispersed glass and carbon fibers on the behavior of textile-reinforced concrete under tensile loading, Engineering Fracture Mechanics, vol.92, pp.56-71, 2012.

Z. P. Bazant and M. F. Kaplan, Concrete at high temperatures : material properties and mathematical models, 1996.

M. Behloul, G. Chanvillard, P. Casanova, and G. Orange, Fibre resistance of Ductal Ultra High Performance Concrete. 1st fib Congress, vol.1, pp.421-430, 2002.

F. Benali, M. Hamidouche, and H. Belhouchet, Cinétique de deshydratation d'un coulis réfractaire. Verre, Céramiques et Composites, vol.5, issue.1, pp.1-6, 2016.

A. Bentur and S. Mindess, Fibre reinforced cementitious composites, 1990.

G. Bernier, Caractérisation de controle des bétons renforcés de fibres, s.l.: Annales de l'Institut Technique Du Batiment et des Travaux Publics, 1991.

E. Bertolesi, F. G. Carozzi, G. Milani, and C. Poggi, Numerical modeling of Fabric Reinforce Cementitious Matrix composites (FRCM) in tension, Construction and Building Materials, vol.70, pp.531-548, 2014.

L. A. Bisby, M. F. Green, and V. K. Kodur, Response to fire of concrete structures that incorporate FRP, Progress in Structural Engineering and Materials, vol.7, issue.3, pp.136-149, 2005.

. Brameshuber, Textile Reinforced Concrete State-of-the Art Report of Rilem TC 201, 2006.

W. Brameshuber, Calcium aluminate cement as binder for textile reinforced concrete, International Conference Textile Reinforced Concrete Edimbourg, 2001.

W. Brameshuber, Report 36 : Textile Reinforced Concrete-State-of-the-Art Report of RILEM TC 201-TRC, vol.36, 2006.

B. S. En, European standard BS EN 196-1 : Methods of testing cement. Determination of strength, 2005.

, BS EN 413-2, 2005. European standard BS EN 413, vol.2, 2005.

M. Butler, V. Mechtcherine, and S. Hempel, Experimental investigations on the durability of fiber-matrix interfaces concrete. Cement and Concrete Composites, vol.31, pp.221-231, 2009.

M. Carcasses, La durabilité des BFUP / recommandations AFGC, s.l.: Caractériser et dimensionner les Bétons Fibrés à Ultra Hautes Performance BFUP, 2011.

M. Castellote, Composition and microstructural changes of cement pastes upon heating, as studied by neutron diffraction, Cement and Concrete Research, vol.34, issue.9, pp.1633-1644, 2004.

A. D. Chefdebien and F. Robert, Mechanical properties of ultra high performance fiber reinforced concrete at high temperature, 7th International Congress 'Concrete: Construction's Sustainable Option, pp.139-148, 2008.

Y. Collet, Etude des propriétés du béton soumis à des températures élevées entre 200 et, Annales des Travaux Publics Belges. s.l.:s.n, pp.332-338, 1977.

B. Collignon, Séchage de bétons réfractaires : expérimentation, modélisation et influence d'un ajout de fibres polymère, s.l, 2009.

I. Colombo, Textile Reinforced Mortar at High Temperatures, Applied Mechanics and Materials, vol.82, pp.202-207, 2011.
DOI : 10.4028/www.scientific.net/amm.82.202

I. G. Colombo, Textile Reinforced Concrete : experimental investigation on design parameters. Materials and Structures, pp.1933-1951, 2013.

I. G. Colombo, Textile Reinforced Concrete : experimental investigation on design parameters, Materials and Structures, vol.46, issue.11, pp.1953-1971, 2013.
DOI : 10.1617/s11527-013-0017-5

R. Contamine, Contribution à l'étude du comportement mécanique de composites textilemortier: application à la réparation et/ou renforcement de poutres en béton armé vis-à-vis de l'effort tranchant, 2011.

S. Degallaix and B. Ilshnier, Caractérisation expérimentale des matériaux : propriétés physiques, thermiques et mécaniques, s.l.: Presses Polytechniques et Universitaires Romandes, 2007.

G. Derombise, L. V. Van-schoors, and P. Davies, Degradation of Technora aramid fibers in alkaline and neutral environments, Polymer Degradation and Stability, vol.94, issue.10, pp.1615-1620, 2009.

W. P. Dias, G. A. Khoury, and P. J. Sullivan, Mechanical properties of hardened cement paste exposed to temperatures up to 700°C (1292 F), ACI Materials Journal, pp.160-166, 1990.

U. Dilthey, M. Schleser, M. Moller, and O. Weichold, Applications of polymers in textile reinforced concrete-From the interface to construction elements, Proceedings of the 1st International RILEM conference on textile reinforced concrete. Aachen: s.n, pp.55-65, 2006.

Y. Du, M. Zhang, F. Zhou, and D. Zhu, Experimental study on basalt textile reinforced concrete under uniaxial tensile loading, Construction and Buildings Materials, vol.138, pp.88-100, 2017.
DOI : 10.1016/j.conbuildmat.2017.01.083

D. Dvorkin and A. Peled, Effect of reinforcement with carbon fabrics impregnated with nanoparticles on the tensile behavior of cement based composites, Cement and Concrete Research, vol.85, pp.28-38, 2016.

E. R. , Tech, s.d. Technical textiles

F. Ehlig, F. Jesse, and M. Curbach, High temperature tests on textile reinforced concrete (TRC) strain specimens, International RILEM Conference on Material ScienceMATSCI, 2010.

M. El-hachem, Etude de l'influence de la fibre de fonte sur le retrait et le fluage du béton, s.l, 1990.

H. Fares, Propriétés mécaniques et physico-chimiques des bétons autoplacants exposés à une température élvevée, s.l, 2009.

S. Feih and A. Mouritz, Tensile properties of carbon fibers and carbon fiber-polymer composites in fire, Composites Part A : Applied Science and Manufacturing, vol.43, issue.5, pp.765-772, 2012.

M. A. Glinicki, A. Vautrin, P. Soukatchoff, and J. François-brazier, Plate impact testing method for GRC composites. Cement and Concrete Composites, vol.16, pp.241-251, 1994.
DOI : 10.1016/0958-9465(94)90036-1

M. F. Green, V. K. Kodur, and L. A. Bisby, Design guidlines for fire resistance of FRP strengthened concrete structures, Eighth International Conference on FRP in Reinforced Concrete Structures (FRPRCS-8), 2007.

I. G. Hager, Comportement à haute température des bétons à haute performanceévolution des principales propriétés mécanique, s.l, 2004.

H. Hatta, T. Aoki, Y. Kogo, and T. Yarii, High temperature oxidation behavior of SiCcoated carbon fiber reinforced carbon matrix composites, Composites Part A : Applied Science and Manufacturing, vol.30, issue.4, pp.515-520, 1999.

J. Hegger, S. Voss, and O. Bruckermann, AR-Glass and Carbon Fibers for Textile Reinforced Concrete-Acomparison of Efficiency. Spring-Concrete Soars, Spans and Supports, 2005.

J. Hegger, S. Voss, M. Di-prisco, and R. P. Felicetti, Textile reinforced concrete under biaxial loading, 6th International RILEM Symposium on Fibre reinforced Concretes, pp.1463-1472, 2004.

J. Hegger, J. Will, O. Bruckermann, and S. Voss, Load and bearing behaviour and simulation of textile reinforced concrete, Materials and Structures, vol.39, issue.8, pp.765-776, 2005.

J. Hegger, N. Will, and O. Bruckermann, Load-bearing behaviour and simulation of textile reinforced concrete, Materials and structures, vol.39, issue.8, pp.765-776, 2006.
DOI : 10.1617/14324

R. Hempel, M. Butler, S. Hempel, and H. Schorm, Durability of textile reinforced concrete, vol.244, pp.87-108, 2007.

K. Hertz, Heat-induced explosion of dense concretes, s.l, 1984.

O. Homoro, Caractérisation expérimentale du comportement thermomécanique à haute temperature des composites textile-mortier (TRC): role des fibres courtes discontinues en verre, s.l.: Mémoire de MAster 2, 2016.

, Proposition d'étude de faisabilité d'un projet national de recherche et développement sur les matériaux composites en Génie Civil, s.l, Projet COMAC, 2005.

, Essais de résistance au feu-Eléments de construction-Partie 10 : Exigences spécifiaues pour déterminer la contribution des matériaux de protection appliqués aux éléments des structures en acier, pp.834-844, 2014.

I. Jonatka and T. Nurnbergerova, Effect of temperature on structure quality of cement paste and high-strength concrete with silica fume, Nuclear Engineering and Design, vol.235, pp.2019-2032, 2005.

P. Kalifa, G. Chéné, and C. Gallé, High-temperature behaviour of HPC with polypropylène fibers: From spalling to microstructure, Cement and Concrete Research, vol.31, issue.10, pp.1487-1499, 2001.

M. Kanéma, Influence des paramètres de formulation sur le composrtement à haute température des bétons, s.l, 2007.

A. Katz, V. C. Li, and A. Kazmer, Bond properties of carbon fibers in cementitious matrix, Journal of Materials in Civil Engineering, vol.7, pp.125-128, 1995.

A. Keil and M. Raupach, Improvement of the load-bearing capacity of textile reinforced concrete by the use of polymers. 12 th International Congress on Polymer in Concrete, pp.27-28, 2007.

G. A. Khoury, Strain components of nuclear-reactor-type cpncretes during first heat cycle, Nuclear Engineering and Design, vol.156, pp.313-321, 1995.

G. A. Khoury, Polypropylene fibres in heated concrete. part 2 : pressure relief mechanisms and modelling criteria, vol.60, pp.189-204, 2008.

G. A. Khoury and G. P. Sullivan, Strain of concrete during first heating to 600°C under load, vol.37, pp.195-215, 1985.

V. Kodur, Properties of Concrete at elevated temperatures. ISRN Civil Engineering, pp.1-15, 2014.

M. A. Kok, Textile reinforced double curved concrete elements, 2013.

K. Kong, Comparative characterization of the durability behaviour of textilereinforced concrete (TRC) under tension and bending, Composite Structures, vol.179, pp.107-123, 2017.

M. Kruger, Prestressed textile reinforced concrete, s.l.: Thèse de doctorat, 2004.

M. Kruger and H. W. Reinhardt, Prestressed textile reinforced cement composites, Proceeding 11th International techtextil Symp. fur technische Textilien, Vlieddtoffe, 2001.

C. Laneyrie, Valorisation Des Déchets de Chantiers Du BTP : Comportement à Haute Température Des Bétons de Granulats Recyclés, s.l, 2014.

T. Lucas, Les composites s, 2005.

E. Mader, R. , P. Gao, and S. L. , Coatings for Fiber and Interphase Modification in a Cementitious Matrix, pp.121-132, 2003.

P. Matray and P. Hamelin, Etude de l'influence du rapport MgO/Sol sur les propriétés des liants magnésiens, Materials and Structures, RILEM publications, vol.24, pp.106-114, 1991.
DOI : 10.1007/bf02472471

V. Mechtcherine, Novel cement-based composite for the strengthening and repair of concrete structures, Construction and Building Materials, vol.41, pp.365-373, 2013.

A. Menou, Etude du comportement thermomécanique des bétons à haute température: approche luti-échelles de l'endommagement thermique, s.l, 2004.

M. Michel, Accélération de ciment au laitier par du ciment sulfo-alumineux, s.l, 2009.

J. C. Mindeguia, Contribution Expérimentale à la compréhension des risques d'instabilité thermiques des bétons, s.l, 2009.

S. Mindess, J. F. Young, and D. Darwin, Concrete, 2003.

L. Missemer, Etude du comportement sous très hautes températures des bétons fibrés à ultra performances : application au BCV, s.l.: Th8se de doctorat, 2012.

B. Mobasher, A. Peled, and J. Pahilajani, Distributed cracking and stiffness degradation in fabric-cement composites, Materials and Structures, vol.39, issue.3, pp.317-331, 2005.
DOI : 10.1617/14163

B. Mobasher, A. Peled, and J. Pahilajani, Distributed cracking and stiffness degradation in fabric-cement composites, Materials and Structures, vol.39, issue.3, pp.317-331, 2006.

M. Molter, Load-bearing capacity and serviceability of textile reinforced cending beams, Proceedings of First Colloquium on Special Research Areas, vol.528, pp.205-219, 2001.

G. Mosselmans, Thermal hardening and structure of a phosphorus containing cementitious model material phosphoric acid-wollastonite, Journal of Thermal Analysis and Calorimetry, vol.88, issue.3, pp.723-729, 2007.

A. E. Naaman, New fiber technology: Cement, Ceramic and polymeric composites, Concrete International, issue.7, p.20, 1998.

, Hydraulic binders. testing technics. Characterization of cements by fluidity measurement under mortar vibration, NF P15-437, 1987. French standard NF P15-437, 1987.

T. H. Nguyen, Contribution à l'étude du comportement thermomécanique à très haute température des matériaux composites pour la réparation et/ou le renforcement des stures de Génie Civil, s.l.: Thèse de doctorat, 2015.

T. H. Nguyen, X. H. Vu, and A. Si-larbi, Experimental Study of the effect of simultaneous mechanical and high-temperature loadings on the behaviour of textile-reinforced concrete (TRC), Construction and Building Materials, vol.125, pp.253-270, 2016.

V. T. Nguyen, Comportement des bétons ordinaire et à hautes performances soumis à haute température : application à des éprouvettes de grandes dimensions, s.l, 2013.

A. Nobili and C. Signorini, On the effect of curing time and environmental exposure on impregnated, Composite Part B : Engineering, vol.112, pp.300-313, 2017.

. Nodal, Etude stratégique réalisée pour le compte de la DiGITIP/SIM, s.l.: L'industrie française des matériaux composites, 2002.

A. Noumowé, Effet des hauts températures (20-600°C) sur le béton. Cas particulier du béton à hautes performances, s.l.: Thèse de doctorat, 1995.

C. K. Park, G. D. Kim, S. H. Lee, and Y. S. Sohn, The effect of thermal characteristics of organic fibers on the spalling of high-strength concrete, Consec'07, pp.1627-1632, 2007.

A. Peled and A. Bentur, Geometrical characteristics and efficiency of textile fabrics for reinforcing cement composites, Cement and Concrete Research, vol.30, issue.5, pp.781-790, 2000.

A. Peled and A. Bentur, Fabric structure and its reinforcing efficiency in textile reinforced cement composites, Composite Part Application Scientific Manufacturer, vol.34, issue.2, pp.107-118, 2003.

A. Peled, A. Bentur, and D. Yankelevsky, Effects of woven fabric geometry on the bonding performance of cementitious composites : mechanical performance, Advanced Cement Based Materials, vol.7, issue.1, pp.20-27, 1998.

A. Peled, Influences of textile characteristics on the tensile properties of warp knitted cement based composite. Cement and Concrete Combosites, vol.30, pp.174-183, 2008.

J. Piasta, Heat deformation of cement phases and microstructure of cement paste, Materials and Structures, vol.17, issue.102, pp.415-420, 1984.

J. Piasta and W. G. Piasta, Beton zwykly : dobor kruszyw i cementow, projektowanie betonu, trwalosc betonu, odpornosc chemiczna i termiczna, 1994.

P. Pliya, Contribution des fibres de polypropylène et métalliques à l'amélioration du comportement du béton soumis à une température élevée, s.l, 2010.

P. Pliya, A. L. Beaucour, and A. Noumowé, Contribution of cocktail of polypropylene and steel fibers in improving the behaviour of high strength concrete subjected to high temperature, Construction and Building Materials, vol.25, issue.4, pp.1926-1934, 2011.

J. F. Preveraud, JEC Composites Show. Paris, s.n, 2009.

G. Promis, Composites fibres / matrice minérale : du matériau à la structure, 2010.

D. A. Rambo, F. D. Silva, R. D. Filho, and O. Fonseca-martins-gomez, Effect of elevated temperatures on the mechanical behavior of basalt textile reinforced refractory concrete, Materials and Design, vol.65, issue.0, pp.24-33, 2015.

D. A. Rambo, Tensile stregth of a calcium-aluminate cementitious composite reinforced with basalt textile in a high-temperature environment. Cement and Concrete Composites, vol.70, pp.183-193, 2016.

M. Raupach, Epoxy-impregnated textiles in concrete + Load bearing capacity and durability. ICTRC'2006-1st International RILEM Conference on Textile Reinforced Concrete, pp.77-88, 2006.

, Références Bibliographiques

C. Scheffler, Aging of alkali-resistant glass and basalt fibers in alkaline solutions : Evaluation of the failure stress by Weibull distribution function, Journal Non Crystalline Solids, vol.355, issue.52, pp.2588-2595, 2009.

N. Schmitt, Coupling between kinetics of dehydration, physical and mechanical behaviour for high alumina castable. Cement and Concrete esearch, vol.30, pp.1597-1607, 2000.

U. Schneider, Concrete at high temperature : A general review, Fire Safety Journal, vol.13, pp.55-68, 1988.

U. Schneider, U. Diederichs, and C. Ehm, Effect of temperatures on steel and concrete for PCRV's, Nuclear Engineering and Design, vol.67, pp.245-258, 1982.

S. Larbi, A. Agbossou, A. Hamelin, and P. , Experimantal and numerical investigations about textile-reinforced concrete and hybrid solutions for repairing and/or strengthining reinforced concrete beams, Composite Structures, vol.99, pp.152-162, 2013.

F. A. Silva, Effects of elevated temperatures on the interface properties of carbon textile-reinforced Concrete. Cement and Concrete Composites, vol.48, pp.26-34, 2014.

F. Simonn, Comportement thermomécanique de bétons réfractaires alumineux contenent du spinelle de magnésium, s.l.: Thèse de doctorat, 2000.

J. Soro, Elaboration par coulage en bande et caractérisation de composites fibreux à matrice à base de ciments alumineux, s.l, 2005.

J. Soro, A. Smith, and C. Gault, Processing by tape casting and mechanical behaviour of aluminous cement-based matrix alumina fibers composites, Journal of the European Ceramic Society, vol.27, pp.1469-1474, 2007.

E. Tolentino, Effects of high temperature on the residual performance of Portland cement concretes, Materials Research, vol.5, issue.3, pp.301-307, 2002.

U. and F. J. , Couplages thermo-mécaniques dans le béton, s.l.: Un premier bilan, 1999.

K. Van-de-veldde, P. Kiekens, and L. Van-langenhove, Basalt fibres as reinforcement for composites, Proceedings of 10th International Conference on composite/nanoengineering. University of, 2003.

F. T. Wallenberger and S. D. Brown, High-modulus glass fibers for new transportation and infrastructure composites and new infrared uses, Composites Science Technology, vol.51, pp.243-263, 1994.

J. Wastiels, Sandwich panels in construction with HPFRCC-faces : New possibilities and adequate modelling, pp.143-151, 1999.

B. Wulfhorst, Textile technology. Wiley Online Library. Références Bibliographiques, 2006.

Z. Xing, Influence of the nature of aggregates on the behaviour of concrete subjected to elevated temperature, Cement and Concrete Research, vol.41, issue.4, pp.392-402, 2011.

S. Xu, L. Shen, J. Wang, L. Shilang-xu, J. Shen et al., The hightemperature resistance performance of TRC thin-plates with different cementitious materials: Experimental study, Construction and Building Materials, vol.115, pp.506-519, 2016.

A. Younes, Mechanical behavior of carbon and glass filament yarns undeer high temperatures for composite applications, The Journal of the Textile Institute, vol.104, issue.3, pp.251-259, 2013.

L. I. Zongjin, A. C. Liu, and C. K. Leung, Polymer Modified Glass Fiber Reinforced Cementitious Composites, Special Publication, vol.206, pp.401-410, 2002.