M. J. Cunningham, Measurement errors and instrument inaccuracies, Journal of Physics E-Scientific Instruments, vol.8, issue.8, 1981.
DOI : 10.1088/0022-3735/14/8/001

E. Bénévent, Contribution à l'étude et à la réalisation d'un circulateur hyperfréquence à couche magnétique dans la bande 40-50 GHz, 2006.

O. Zahwe, Conception et réalisation d'un circulateur coplanaire à couche magnétique de YIG en bande X pour des applications en télécommunications, 2009.

T. Boyajian, Etude et réalisation d'un circulateur hyperfréquence à nano particules magnétiques orientées dans la bande 40-60 GHz, 2011.

A. Tchangoulian, Utilisation de matériaux composites magnétiques à nanoparticules pour la réalisation de composants passifs non réciproques micro-ondes, 2014.

S. Yang, Etude des composants passifs non réciproques hyperfréquences sur substrat ferrite LTCC : application aux circulateurs, 2015.

F. Gardiol and . Electromagnétisme, Presses Polytechniques et Universitaires Romandes, Dunod, vol.3, 1987.

R. Badoual, C. Martin, and S. Jacquet, Les micro-ondes 2ème édition. Collection Technologies, 1995.

D. M. Pozar, Microwave Engineering. Wily, 2011.

C. A. Balanis, Antenna Theory, Analysis and Design. Wily, 2005.

F. Gardiol, Hyperfréquences. Presses Polytechniques et Universitaires Romandes, Dunod, 1990.

S. Blin, Guides d'ondes hyperfréquences, GMEE109, 2013.

B. Bayard, Contribution au développement de composants passifs magnétiques pour l'électronique hyperfréquence, 2000.

L. Chusseau, . Hyperfréquence, and S. Paramètres, Conception et réalisation des standards de calibrage pour des dispositifs 3-ports à 120 ?, 2005.

G. Simpson, Vector network analysis and ARFTG : A historical perspective, IEEE 50th ARFTG Conference Digest-Fall, vol.32, 1997.
DOI : 10.1109/arftg.1997.327255

D. Rytting, ARFTG 50 years network analyzer history. IEEE MTT-S International Microwave Symposium Digest, 2008.
DOI : 10.1109/arftg.2008.4633319

D. Electronique, Les analyseurs de réseaux scalaires et vectoriels, p.161, 2005.

J. Achkar, Analyseurs de réseaux en micro-ondes, 2006.

. Agilent, Agilent Network Analyzer Basics. Agilent Technologies, 2004.

G. H. Bryant, Principles of microwave measurements, IEE Electrical Measurement Series, vol.5, 1988.
DOI : 10.1049/pbel005e

. Agilent, Agilent Scalar Network Analyzer-Migrating from scalar to vector network analyzer systems, Agilent Technologies, 2009.

A. Estrada, The vector network analyzer-an essential tool in modern ATE measurements, IEEE Instrumentation & Measurement Magazine, 2012.
DOI : 10.1109/autest.2011.6058735

B. Neumeyer, A low-cost phase measurement extension for scalar network analyzers, 16th European Microwave Conference, 1986.
DOI : 10.1109/euma.1986.334287

J. R. Juroshek and R. B. Marks, Microwave circuits measurements, vol.29, 1992.

. Anritsu, Time domain measurements using vector network analyzers, Application Note. Anritsu, 2009.

D. and A. Litwin, Equivalence de deux analyseurs de réseaux vectoriels pour la tra çabilité des paramètres S, Revue fran çaise de métrologie n ? 12, vol.4, 2007.

M. Bahouche, Etude et tra çabilité du calibrage Line-Attenuator-Reflect pour des mesures sous pointes à l'aide d'un analyseur de réseau vectoriel, Ecole Nationale Supérieure des Télécommunications, 2010.

K. Kouicem, Analyse et correction des erreurs résiduelles sur analyseur de réseau hyperfréquence-Développement de méthodes relatives à la méthode d'autocalibrage TRL, 1996.

G. F. Engen, The six-port reflectometer : an alternative network analyzer, IEEE Transactions on microwave theory and techniques, p.25, 1977.

C. A. Hoer, A network analyzer incorporating two six-port reflectometers, IEEE Transactions on microwave theory and techniques, p.25, 1977.

B. Huyart, E. Bergeault, G. Geneves, and L. Jallet, Conception et résultats de mesure d'un analyseur de réseaux à six accès dans la bande de fréquence, pp.1-18

. Ghz, Annals of Telecomminications, vol.46, pp.443-451, 1991.

R. D. Pollard, Microwave measurements-Chapter 10 : Microwave network analysers. The Institution of Engineering and Technoligy, 2007.

M. Ney, Simulation électromagnétique-Modèles et optimisation. Techniques de l'ingénieur, 2006.

M. Hiebel, Vector network analyzer calibration-The basics, White Paper-75 years of driving innovation, 2008.

R. B. Marks and D. F. Williams, Journal of Research of the National Institute of Standards of Technology, vol.97, 1992.

. Anritsu, Arbitrary impedance, Application note, 2002.

R. S. Schwartz and R. J. Pescatore, Instrument test cables extend measuring ports of HP8510 VNA, IEEE 26th ARFTG Conference Digest-Winter, 1985.

, Axon. Cordons coaxiaux hyperfréquences AXOWAVE, 2008.

D. Herstein, A novel technique for evaluating and integrating of connectorless (drop-in) microwave companents. IEEE MTT-S International Microwave Symposium Digest, 1987.

J. D. King and B. Biron, Direct characterization of non-inserable microwave test fixture for packaged MMICs, IEEE 57th ARFTG Conference Digest-Spring, 2001.

, Cascade Microtech. Layout rules for GHz probing

M. Bauwens, L. Chen, C. Zhang, and A. Arsenovic, A terahertz micro machined onwafer probe for WR-1.2 waveguide, EEE 7th European Microwave Integrated Circuits Conference (EuMIC), 2012.

D. F. Williams and T. H. Miers, A coplanar probe to microstrip transition, IEEE Transactions Microwave Theory and Techniques, vol.36, 1988.

T. Bednorz, Measurement uncertainties for vector network analysis, Application note IEZ29-1E, 1996.

D. Rytting, Network analyzer error models and calibration methods, ARFTG/NIST Short Course on RF Measurements for a Wireless World, 2001.

H. J. Eul and B. Schiek, A generalized theory and new calibration procedures for network analyzer self-calibration, IEEE Transactions Microwave Theory and Techniques, vol.39, pp.724-731, 1991.

R. B. Marks, Formulations of the basic vector network analyzer error model including switch terms, 50th ARFTG Conference Digest, 1997.

S. Vandenberghe, D. Schreurs, G. Carchon, B. Nauwelaers, and W. De-raedt, Identifying error-box parameters from the twelve-term vector network analyzer error model, IEEE 60th ARFTG Conference Digest-Fall, 2002.

J. V. Butler, D. K. Rytting, M. F. Iskander, and R. D. Pollard, 16-term error model and calibration procedure for on-wafer network analysis measurements, IEEE Transactions Microwave Theory and Techniques, vol.39, 1991.

S. Lucyszyn, RFIC and MMIC measurement techniques, Microwave Measurements, 2007.

J. Hurll, Uncertainty and confidence in measurements. The 14th IET Microwave Measurements Training Course, 2005.

S. E. Rosenbaum, O. Pitzalis, and J. M. Marzan, A calibration method for de-embedding a microwave test fixture, IEEE 27th ARFTG Conference Digest-Spring, vol.9, 1986.

. Agilent, Advanced calibration techniques for vector network analyzers. Agilent Technologies, 2006.

. Anritsu, Understanding VNA calibration, 2012.

. Agilent, 8719ET/20ET/22ET, 8719ES/20ES/22ES Network analyzers-User's guide. Agilent Technologies, 2000.

, The Institution of Engineering and Technoligy, vol.12, 2007.

K. Wong, Using precision coaxial air dielectric transmission lines as calibration and verification standards, Microwave Journal, 1988.

W. Kruppa and K. F. Sodomsky, An explicit solution for the scattering parameters of a linear two-port measured with an imperfect test set, IEEE Transactions Microwave Theory and Techniques, vol.19, 1971.

S. Rehnmark, On the calibration process of Automatic Network Analyzer systems, IEEE Transactions on Microwave Theory and Techniques, vol.22, issue.4, 1974.

Y. Chou and H. Lu, Accurate on-wafer measurement of orthogonal four-port networks using the Thru-Reflection-Unequal-Line (TRuL) calibration method, Proceedings of Asia-Pacific Microwave Conference, 2010.

. Agilent, Specifying calibration standards for the HP 8510 network analyzer, Product Note 8510-5a, 1988.

A. W. Scott, RF measurements of Die and Packages. Artech House Microwave Library, 2002.

A. Rumiantsev and N. Ridler, VNA calibration. IEEE Microwave Magazine, 2008.

A. Basu, An introduction to microwave measurements, 2014.

M. Imparato, T. Weller, and L. Dunleavy, On-wafer calibration using space conservative (SOLT) standards. IEEE MTT-S International Microwave Symposium Digest, 1999.

S. Padmanabhan, L. Dunleavy, J. E. Daniel, A. Rodriguez, and P. L. Kirby, Broadband space conservative on-wafer network analyzer calibration with more complex load and thru models, IEEE Transactions Microwave Theory and Techniques, vol.54, 2006.

C. Microtech, A guide to better vector network analyzer calibrations probe-tip measurements, 1994.

. Anritsu, 360B/37XXXA/B Series vector network analyzer, Application note. Anritsu, 1998.

H. J. Eul and B. Schiek, Reducing the number of calibration standards for network analyzer calibration, IEEE Transactions on Instrumentation and Measurement, 1991.

A. Ferrero, Two-port network analyzer calibration using an unknown "thru, IEEE Microwave and Guided Wave Letters, vol.2, pp.505-507, 1992.

S. Basu and L. Hayden, An SOLR calibrations for accurate measurement of orthogonal on-wafer duts, IEEE Microwave Theory and Techniques Symposium Digest, pp.1335-1338, 1997.

D. K. Walker and D. F. Williams, Comparison of SOLR and TRL calibrations, 51st ARFTG Conference Digest, 1998.

. Anritsu, Techniques for VNA measurements for non insertable devices, 2005.

A. Ferrero and U. Pisani, QSOLT : A new fast calibration algorithm for two port S parameter measurements, IEEE Proceeding 38th ARFTG Microwave Measurements Conference-Fall, pp.15-24, 1991.

J. A. Jargon, R. B. Marks, and D. K. Rytting, Robust SOLT and alternative calibrations for four-sampler vector network analyzers, IEEE Transactions Microwave Theory and Techniques, vol.47, pp.2008-2013, 1999.

R. A. Soares, A unifed mathematical approach to two port calibration techniques and some applications, IEEE Transactions Microwave Theory and Techniques, vol.37, pp.1669-1674, 1989.

K. J. Silvonen, A general approach to network analyzer calibration, IEEE Transactions Microwave Theory and Techniques, vol.40, 1992.

H. Heurmann and B. Shiek, Robust algorithms for TXX network analyzer self-calibration procedures, IEEE Transactions Instrument Measurements, vol.43, issue.1, pp.18-23, 1994.

K. J. Silvonen, Calibration of test fixtures using at least two standards, IEEE Transactions Microwave Theory and Techniques, vol.39, 1991.

G. F. Engen and C. A. Hoer, Thru-Reflect-Line : An improved technique for calibrating the dual 6-Port Automatic Network Analyzer, IEEE Transactions Microwave Theory and Techniques, pp.983-987, 1979.

R. A. Speciale, A generalization of the TSD network analyzer procedure, covering nport scattering parameters measurement, affected by leakage errors, IEEE Transactions Microwave Theory and Techniques, pp.1100-1115, 1977.

J. H. Eul and B. Schiek, Thru-Match-Reflect : One result of a rigorous theory for deembedding and network analyzer calibration, Proceeding 18th European Microwave Conference, pp.909-914, 1988.

D. Andrew, S. Eric, and J. Keith, Achieving greater on-wafer s-parameters accuracy with the LRM calibration techniques, 34th ARFTG Conference Digest, pp.61-66, 1989.

R. Doerner and A. Rumiantsev, Verification of the wafer-level LRM+ calibration technique for GaAs applications up to 110 GHz, 65th ARFTG Microwave Measurements Conference-Spring, 2005.

D. Andrew, S. Eric, and J. Keith, LRM and LRRM calibrations with automatic determination of load inductance, Proceedings 36th ARFTG Microwave Measurements Conference-Fall, pp.57-63, 1990.

R. Doerner, Evaluation of wafer-level LRRM and LRM+ calibration techniques, Proceeding 69th ARFTG Microwave Measurements Conference-Spring, pp.86-89, 2007.

M. B. Steer, S. B. Goldberg, G. Rinne, P. D. Franzon, I. Turlik et al., Introducing the Through-Line deembedding procedure, IEEE MTT-S International Microwave Symposium Digest, pp.1455-1458, 1992.

K. Wong, Network analyzer calibrations-Yesterday, today and tomorrow, IEEE MTT-S International Microwave Symposium Digest, pp.19-25, 2008.

O. Ostwald, 3-port measurements with vector network analyzer ZVR. Application note iez26-1e, 1996.

O. Ostwald, 4-port measurements with vector network analyzer ZVR. Application note iez25-1e, 1996.

T. G. Ruttan, B. Grossman, A. Ferrero, V. Teppati, and J. Martens, Multiport VNA measurements. IEE Microwave Magazine, 2008.

A. Ferrero, Multiport VNA measurements and their digital applications, Proceeding of Asia-Pacific Microwave Conference, 2010.

S. B. Goldberg, M. B. Steer, and P. D. Franzon, Accurate experimental characterization of three-ports, IEEE MTT-S International Microwave Symposium Digest, 1991.

H. Lu and T. Chu, Multiport scattering matrix measurement using a reduced-port network analyzer, IEEE Transactions Microwave Theory and Techniques, vol.51, pp.1525-1533, 2003.

F. Lenk and R. Doerner, A new multiport measurement-method using a two-port network analyzer. IEEE MTT-S International Microwave Symposium Digest, 2005.

S. Quintanel, D. Pasquet, E. Bourdel, C. Duperrier, D. Lesénéchal et al., On wafer multi-port circuits characterization technique with a two-port VNA, IEEE 81st ARFTG Microwave Measurement Conference, 2013.

I. Rolfes and B. Schiek, Multiport method for measurement of the scattering parameters of N-ports, IEEE Transactions on Microwave Theory and Techniques, 2005.

S. Kolb and R. Stolle, Multiport VNA self-calibration of a partially leaky error model with a reciprocal standard, VDE German Microwave Conference, 2014.

. Agilent, Specifying calibration standards and kits for Agilent Vector Network AnalyzersApplication note 1287-11. Agilent Technologies, 2011.

R. B. Marks, J. A. Jargon, and D. K. Rytting, Accuracy of lumped-element calibrations for four sampler vector network analyzers, IEEE MTT-S International Microwave Symposium Digest, vol.3, pp.1487-1490, 1998.

E. Danaci, O. N. Ucan, and M. Bayrak, VNA calibration by random neural network, IEEE Conference Digest on Precision Electromagnetic Measurements, pp.82-83, 2002.

S. Papantonis, N. M. Ridler, A. Wilson, and S. Lucyszyn, Reconfigurable waveguide for vector network analyzer verification, IEEE Transactions Microwave Theory and Techniques, vol.62, pp.2415-2422, 2014.

L. Wan, Improved Multimode TRL calibration method for characterization of homogeneous differential discontinuitie, IEEE Transactions Instrument Measurements, vol.64, issue.3, pp.694-703, 2015.

R. Tucker, The history of the Automatic RF Techniques Group, IEEE Microwave Magazine, vol.8, issue.4, pp.69-74, 2007.

R. W. Beatty, Calculated and measured S11, S21 and group delay for simple types of coaxial and rectangular waveguide 2-port standards, NBS, 1974.
DOI : 10.6028/nbs.tn.657
URL : https://doi.org/10.6028/nbs.tn.657

M. A. Maury and G. R. Simpson, Two-port verification standards in 3.5 mm and 7 mm for vector network analyzers, Microwave Journal, vol.29, pp.101-110, 1984.
DOI : 10.1109/arftg.1984.323584

R. B. Marks, A multiline method of network analyzer calibration, IEEE Transactions on Microwave Theory and Techniques, vol.39, issue.7, pp.1205-1215, 1991.
DOI : 10.1109/22.85388
URL : https://zenodo.org/record/1261153/files/article.pdf

J. P. Mondal and T. Chen, Propagation constant determination in microwave fixture de-embedding procedure, IEEE Transactions on Microwave Theory and Techniques, vol.36, issue.4, pp.706-714, 1988.

V. Adamian, Electronic calibration of a vector network analyzer (VNA) for non-insertable devices, IEEE 43rd ARFTG Conference Digest Spring, vol.25, 1994.

R. Ginley, D. Williams, and D. Legolvan, A new electronic verification method for vector network analyzers, IEEE Conference on Precision Electromagnetic Measurements, pp.587-586, 2010.
DOI : 10.1109/cpem.2010.5544758
URL : https://zenodo.org/record/1266714/files/article.pdf

J. Stenarson, C. Eio, and K. Yhland, A calibration procedure for electronic units, IEEE 84th ARFTG Microwave Measurement Conference, 2014.
DOI : 10.1109/arftg.2014.7013414

J. S. Kasten, M. B. Steer, and R. Pomerleau, Enhanced Through-Reflect-Line characterization of two-port measuring systems using free space capacitance calculation, IEEE Transactions Microwave Theory and Techniques, vol.38, pp.215-217, 1990.
DOI : 10.1109/22.46433

Q. Li and K. L. Melde, Broadband on wafer calibration comparison for accuracy and repeatability on coplanar waveguide structures, IEEE Electrical Performance of Electronic Packaging, pp.315-318, 2007.
DOI : 10.1109/epep.2007.4387190

T. L. Smith, Vector network analyzer techniques to measure WR340 waveguide windows. Advanced Photon Source, 2002.
DOI : 10.2172/819451
URL : https://digital.library.unt.edu/ark:/67531/metadc740764/m2/1/high_res_d/819451.pdf

D. Williams, R. Marks, K. Phillips, and T. Miers, Progress toward MMIC on wafer standards, IEEE 36th ARFTG Conference Digest-Fall, vol.18, pp.73-83, 1990.
DOI : 10.1109/arftg.1990.323998

N. I. Dib, W. P. Harokopus, P. B. Katehi, and C. C. Ling, Study of a novel planar transmission line, IEEE MTT-S International Microwave Symposium Digest, vol.2, pp.623-626, 1991.
DOI : 10.1109/mwsym.1991.147080

L. P. Katehi and G. M. Rebeiz, Novel micro machined approaches to MMICs using low parasitic, high performance transmission media and environments, IEEE MTT-S International Microwave Symposium Digest, vol.2, pp.1145-1148, 1996.
DOI : 10.1109/mwsym.1996.511232

R. N. Simons, Coplanar waveguide circuits, components and systems. Microwave and Optical Engineering, Wily Series, 2001.
DOI : 10.1002/0471224758
URL : https://onlinelibrary.wiley.com/doi/pdf/10.1002/0471224758.fmatter_indsub

C. P. Wen, Coplanar waveguide : A strip transmission line suitable for nonreciprocal gyromagnetic device application, MTT International Microwave Symposium, pp.110-115, 1969.
DOI : 10.1109/tmtt.1969.1127105

K. C. Gupta, R. Garg, and I. J. Bahl, Microstrip lines and slotlines, 1996.

. Ansoft, An introduction to HFSS : fundamental principles, concepts and use, 2009.

W. Keith, Lecture 22 : Measurement errors. TRL calibration of VNA, 2008.

H. Ito and K. Masuy, A simple through only de-embedded method for on-wafer S-parameter measurements up to 110 GHz, IEEE MTT-S International Microwave Symposium, 2008.

M. Massénat, Circuits en couches minces-MCM et techniques connexes. Techniques de l'Ingénieur, 2003.

O. Auciello and A. I. Kingon, A critical review of Physical Vapor Deposition techniques for synthesis ferroelectric thin films, Proceedings of the eighth IEEE International Symposium on Applications of ferroelectics, 1992.

D. Dektak, 150 surface profiler user's manual, 2009.

H. Baudrand, Conducteurs en hautes fréquences, 2013.

J. A. Reynoso-hernández, Unified method for determining the complex propagation constant of reflecting and nonreflecting transmission lines, IEEE Microwave and Wireless Components Letters, vol.13, issue.8, pp.351-353, 2003.

J. A. Reynoso-hernández, M. A. Pulido-gaytán, M. C. Maya-sánchez, and J. R. Loo-yau, What can the ABCD parameters tell us about the TRL ?, 79th ARFTG Microwave Measurement Conference, pp.1-4, 2012.

N. I. Dib, M. Gupta, G. E. Ponchak, and L. P. Katehi, Characterization of asymmetric coplanar waveguide discontinuities, IEEE Transactions Microwave Theory and Techniques, vol.41, pp.1549-1558, 1993.

R. N. Simons and G. E. Ponchak, Modeling of discontinuities waveguide discontinuities, IEEE Transactions Microwave Theory and Techniques, vol.36, pp.1796-1803, 1988.

G. E. Ponchak, J. Papapolymerou, and M. M. Tenzeris, Excitation of coupled slotline mode in finite-ground CPW with unequal ground-plane widths, IEEE Transactions Microwave Theory and Techniques, vol.53, pp.713-717, 2005.