J. Guidez and B. Bonin, Réacteurs nucléaires à caloporteur sodium, 2014.

, Ministère de l'environnement, de l'énergie et de la mer, 2010.

X. Manchon, « Contribution à la prédiction du déroulement de scénarios d'accidents graves dans un RNR-Na, 2017.

J. B. Droin, « Modélisation d'un transitoire de perte de débit primaire non protégé dans un RNR-Na, 2016.

P. Sciora, Low void effect core design applied on 2400 MWth SFR reactor, 2011.

F. Bertrand, « Comparison of the behavior of two core designs for ASTRID in case of severe accidents, Nuclear engineering and Design, 2015.

, « Accidents graves des réacteurs à eau de production d'électricité », Rapport IRSN-2008/98-FR, décembre, 2008.

H. A. Bethe and J. H. Tait, « An estimate of the order of magnitude of the explosion when the core of a fast reactor collapses «, In RHM, 1956.

M. Natta, P. Lauret, and J. Moreau, « Accidents de réactivité pouvant affecter les réacteurs Super-Phenix et EFR, 1993.

S. Kondo, K. Morita, Y. Tobita, K. Kamiyama, D. J. Brear et al., , 1996.

D. Lemasson and F. Bertrand, « Simulation with SAS-SFR of a ULOF transient on ASTRID-like core and analysis of molten clad relocation dynamics in heterogeneous subassemblies with SAS-SFR, 2014.

N. Marie, R&D dans le domaine de la thermohydraulique des écoulements polyphasiques pour la modélisation des transitoires accidentels des réacteurs de Générations II, 2018.

F. Bertrand, « Status of severe accident studies at the end of the conceptual design of ASTRID: Feedback on mitigation features, Nuclear Engineering and Design, vol.326, pp.55-64, 2018.

K. Kawada, I. Sato, Y. Tobita, W. Pfrang, L. Buffe et al., Development of PIRT for SAS-SFR validation, vol.22, 2014.

I. Sato, U. Imke, W. Pfrang, and M. Berne, « Transient fuel pin behaviour and failure conditions in CABRI-2 in-pile tests, International Topical Meeting on Sodium Cooled Fast Reactor Safety, vol.2, p.134, 1994.

J. M. Seiler, Étude de l'ébullition du sodium au cours d'un transitoire rapide de puissance dans un canal chauffant, 1977.

R. E. Henry, M. A. Grolmes, and K. H. Fauske, « Propagation velocity of pressure waves in gas liquid mixture», proceedings of the International Symposium on Research in Cocurrent Gas Liquid Flow, 1968.

F. Agosti and L. Luzzi, Heat transfer correlations for liquid metal cooled fast reactorsshort handbooks, 2007.

M. Lainet and «. Germinalv2, Note de présentation, vol.2, 2015.

A. Latrobe, « A comparison of some implicit finite difference schemes used in flow boiling analysis »-OECD specialists meeting on two phase flows, 1976.

A. Quarteroni, Méthodes numériques pour le calcul scientifique, Programmes en MATLAB », Chapitre 10-Collection IRIS

G. H. Golub and C. Van-loan, « Matrix computation, vol.3, 1996.

«. Le-logiciel, P. , and O. , Description et Validation, CEA, rapport CEA-R-5200, 1983.

, Étudier les situations accidentelles », Monographie de la DEN, 2008.

G. L. Fiorini, « Mécanique de l'élement combustible au cours d'un transitoire de puissance : synthèse des résultats étrangers disponibles et orientation des travaux concernant l'utilisation des critères de rupture dans PHYSURA, Note technique S.I.E.S, vol.78, p.51, 1978.

J. Papin, « Behavior of Fast Reactor Fuel During Transient and Accident Conditions, Comprehensive Nuclear Materials, 2012.

D. D. Imholte and F. Aydogan, « Comparison of nuclear pulse reactor facilities with reactivityinitiated-accident testing capability, Prog. Nucl. Energy, vol.91, pp.310-324, 2016.
DOI : 10.1016/j.pnucene.2016.05.012

R. E. Baars, HEDL Empirical correlation of fuel pin TOP failure thresholds », HEDL Rochland, 1976.

, « Failure threshold correlation for fast reactor transient overpower accident analysis », ANS meeting, 1975.

W. Hoffelner, « Materials for Nuclear Plants: From Safe Design to Residual Life Assessments, 2013.

F. W. , Brust et al, « Severe accident condition modeling in PWR environment: creep rupture modeling, ASME Pressure Vessels and Piping Conference, 2013.

K. J. Miles, « DEFORM III : Steady-state and transient pre-failure pin behavior, Documentation du logiciel SAS-SFR, vol.3, 1985.

A. , A transient fuel performance logiciel Part One: General modelling description, Nuclear Engineering and Design, vol.280, pp.150-171, 2014.

&. Site-internet-de-l and . Afcen,

A. Ravenet and «. Ramses-ii, Présentation de la méthodologie et des règles applicables au dimensionnement des matériaux très fragiles, 1989.

H. Bailly, D. Menessier, and C. Prunier, Le combustible nucléaire des REP et des RNR : conception et comportement », Série synthèse Eyrolles, 1996.

L. Roche, , 2001.

R. Fortunier, Comportement mécanique des matériaux

H. Oudin, « Introduction à la plasticité, 2009.

D. Lamkin, « Analytical stress analysis solution for a simplified model of a reactor fuel element, 1974.

H. Többe and «. Iambus, A computer logiciel for the Design and Performance Prediction of Fast Breeder Fuel Rods, p.90, 1990.

C. Struzik, « Interpretation of the CABRI-2 tests E5-E7-E8 using PHYSURA, 1991.

G. Fallet-fidry, Application à la Source froide d'une unité de production d'énergie. » Thèse de doctorat, Contribution à la modélisation et au traitement de l'incertain dans les analyses de risques multidisciplinaires de systèmes industriels, 2012.

R. L. Winkler, Uncertainty in probabilistic risk assessment », Reliability Engineering and System Safety, vol.54, pp.127-132, 1996.

N. Marie, « Physico-statistical approach to assess the core damage variability due to a total instantaneous blockage of SFR fuel sub-assembly, Nuclear engineering and Design, vol.297, pp.343-353, 2016.

J. , Droin et al, « Physical tool for Unprotected Loss Of Flow transient simulations in a Sodium Fast Reactor, Nuclear engineering and Design, vol.106, pp.195-210, 2017.

S. Aublet, « Calcul SPX-coeur C3A avec le logiciel SAS4A version REF96R0.1 : mise au point d'un jeu de données de référence, 2005.

Y. Philipponneau, Thermal conductivity of (U,Pu)O2-x mixed oxide fuel, vol.188, pp.194-197, 1992.

A. Bassi and J. M. Seiler, Synthèse relative à l'ébullition du sodium, 2010.

M. Lainet, B. Michel, J. Dumas, K. Samuelsson, and M. Pelletier, « Current status and progression of GERMINAL fuel performance code for SFR oxide fuel pins, Fast Reactor 2017 (FR17), 2017.

G. Fiorini, « Traitement de la plasticité de la gaine au cours d'un transitoire rapide de température, Note technique S.I.E.S, vol.76, p.51, 1981.

B. Efron and R. J. Tibshirani, « An introduction to the Bootstrap, 1994.

. Site,

M. De-lozzo and A. Marrel, « New improvements in the use of dependence measures for sensitivity analysis and screening, Soumis à Journal of Statistical Computation and Simulation, 2015.

A. N. Hall, Outline of a new thermodynamic model of energetic fuel-coolant interactions, Nuclear engineering and Design, vol.109, pp.407-415, 1988.

P. Van-uffelen, Modelling of Nuclear Fuel Behaviour », Institute of Transuranium Elements, 2006.

S. Nanty, « Quantification des incertitudes et analyse de sensibilité pour logiciels de calcul à entrées fonctionnelles et dépendantes, 2016.

A. Bachrata, Unprotected Loss Of Flow simulation on ASTRID CFV V3 reactor core, 2014.

P. Marsault, Modélisation CATHARE des coeurs CFV pour les études de transitoires, 2016.

, Site internet, vol.3

X. Manchon, Vaporization and expansion of molten fuel in a SFR: a combined Non-Equilibrium Thermodynamics and Dimansional Analysis Methodology », ICMF2016, 2016.

P. Reuss, Précis de neutronique, 2008.

S. Marguet, La physique des réacteurs nucléaires, 2013.

J. Papin, L. Buffe, and «. , Accident de fusion d'un coeur de réacteur à neutrons rapides refroidi au sodium. États des lieux des logiciels et des connaissances acquises par les programmes expérimentaux, 2008.

«. Le-combustible-des-rnr-na, ». , M. De-la, and D. Moniteur, , 2014.

«. La, Neutronique : les logiciels de calcul de la neutronique et le calcul haute performance », Monographie de la DEN, 2014.