R. Philippe, Les premiers moulins à vent, Annales de Normandie, issue.2, pp.99-120, 1982.

S. , Modalisation des differentes technologies d'eoliennes integrees dans un reseau de moyenne tension, 2004.

E. Hau and W. Turbines, , pp.1-792, 2006.

B. Multon, O. Olivier-gergaud, ,. , H. B. Ahmed, ,. X. Roboam et al., Etat de l'art des aérogénérateurs

, Key world energy statistics, 2016.

B. Multon, X. Roboam, B. Dakyo, C. Nichita, O. Geraud et al., Aérogénérateurs électriques, vol.1, pp.1-18, 2004.

H. Polinder, A. Abrahamsen, K. Atallah, B. Bech-jensen, and R. A. Mcmahon, Trends in Wind Turbine Generator Systems, IEEE Journal of Emerging and Selected Topics in Power Electronics, vol.1, issue.3, pp.174-185, 2013.

V. Yaramasu, B. Wu, P. C. Sen, S. Kouro, and M. Narimani, Wind energy installed capacity increased exponentially over the past three decades,and has become a real alternative to increase renewable energy penetrationinto the energy mix, Proceedings of the IEEE, vol.103, issue.3, pp.740-788, 2015.

F. Poitiers, Etude et commande de génératrices asynchrones pour l'utilisation de l'énergie éolienne, 2003.

A. D. Hansen, F. Lov, F. Blaabjerg, and L. H. Hansen, Review of Contemporary Wind Turbine Concepts and their Market Penetration, Wind Engineering, vol.28, issue.3, pp.247-263, 2004.

A. Mirecki, Etude comparative de chaînes de conversion, 2005.

H. Polinder, S. W. De-haan, M. R. Dubois, J. G. Han, and . Slootweg, Basic Operation Principles and Electrical Conversion Systems of Wind Turbines, EPE Journal, vol.15, issue.4, pp.43-49, 2005.

H. Polinder, P. Tavner, F. Van-der-pijl, and P. Tavner, Comparison of direct-drive and geared generator, IEEE Transactions on Energy Conversion, vol.21, issue.3, pp.725-733, 2006.

M. Lopez, Contribution à l'optimisation d'un système de conversion éolien pour une unité de production isolée, 2008.

I. Munteanu, A. Bratcu, N. Cutululis, and E. Ceanga, Optimal Control of Wind Energy Systems, pp.1-298, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00984677

M. , G. Molina, and P. E. Mercado, Modelling and Control Design of PitchControlled Variable Speed Wind Turbines, 2011.

H. Polinder, Overview of and Trends in Wind Turbine Generator Systems, Power and Energy Society General Meeting, pp.24-29, 2011.

F. Blaabjerg, M. Liserre, and K. Ma, Power Electronics Converters for wind turbine systems, IEEE Transactions on industry Applications, vol.48, issue.2, pp.708-719, 2012.

S. M. Muyeen, Wind Energy Conversion Systems, pp.1-521, 2012.

M. H. Quang, Optimisation de la production de l'électricité renouvelable pour site isolé, 2013.

F. Blaabjerg and K. Ma, Future on Power Electronics for Wind Turbine Systems, IEEE Journal of Emerging and Selected topics in Power Electronics, vol.1, issue.3, pp.139-152, 2013.

M. Lalou, Système de conversion simplifié pour éolienne équipée de génératrice synchrone à aimants permanents, Revue des Energies Renouvelables, vol.18, pp.469-477

F. Blaabjerg and K. Ma, Wind Energy Systems, Proceedings of the IEEE, vol.105, issue.11, pp.2116-2131, 2017.

H. Tiegna, Contribution à la modélisation analytique des machines synchrones à flux axial à aimants permanents à attaque directe en vue de leur dimensionnement. Application aux éoliennes, 2013.

F. ,

B. Multon, Historique des machines électromagnétiques et plus particulièrement des machines à réluctance variable, pp.3-8, 1995.

A. Parviainen, Design of axial flux permanent magnet low-speed machines and performance comparaison between radial flux and axial flux machines, 2005.

N. and A. Karim, Optimisation multi-critères et multi-physique d'aérogénérateurs à aimants permanents à flux axial, 2008.

H. Vansompel, Design of an Energy Efficient Axial Flux Permanent Magnet Machine, 2013.

F. Feudale, A. Odorico, M. Sica, F. Caricchi, F. Giulii-capponi et al., Multistage axial flux PM machine for direct-drive railway traction applications, International Conference on Ship Propulsion and Railway Traction Systems Conference, pp.4-6, 2005.

F. Giulii-capponi, G. D. Donato, and F. Caricchi, Recent Advances in Axial-Flux Permanent-Magnet Machine Technology, IEEE Transactions on Industry Applications, vol.48, issue.6, pp.2190-2205, 2012.

R. Qu, M. Aydin, and T. Lipo, Performance comparison of dual-rotor radial-flux and axial-flux permanent-magnet BLDC machines, IEEE conference of Electric Machines and Drives Conference, 2003. IEMDC'03, pp.1-4, 2003.

M. Aydin, S. Huang, and T. Lipo, Axial Flux Permanent Magnet Disc Machines: A Review, p.1415

, Engineering Drive, Madison, WI 53706-1691, 2004.

C. Liu, T. Chiang, J. F. Zamora, and S. Lin, Field-Oriented Control Evaluations of a Single-Sided Permanent Magnet Axial-Flux Motor for an Electric Vehicle, IEEE Transactions on Magnetics, vol.39, issue.5, pp.3280-3282, 2003.

H. Kierstead, R. Wang, and M. J. Kamper, Design optimization of a single-sided axial flux permanent magnet in-wheel motor with double-layer non-overlap concentrated winding, The 18th conference of Southern African, 2009.

M. J. Kamper, R. Wang, and F. G. Rossouw, Analysis and Performance of Axial Flux Permanent-Magnet Machine With Air-Cored Nonoverlapping Concentrated Stator Windings, IEEE Transactions on Industry Applications, vol.44, issue.05, pp.1495-1505, 2008.

G. D. Donato, F. G. Capponi, and F. Caricchi, Fractional-Slot Concentrated-Winding Axial-Flux Permanent-Magnet Machine With Core-Wound Coils, IEEE transactions on industry applications, vol.48, issue.2, pp.630-641, 2012.

M. Aydin, S. Huang, and T. A. Lipo, A new axial flux surface mounted permanent magnet machine capable of field control, IEEE Conference Record of the Industry Applications Conference, pp.13-18, 2002.

J. Azzouzi, Contribution à la modélisation et à l'optimisation des machines synchrones à aimants permanents à flux axial. Application au cas de l'aérogénérateur, 2007.

L. Vido, Y. Amara, and M. Gabsi, Machines synchrones à double excitation MSDE, 2011.

Y. Amara, L. Vido, M. Gabsi, E. Hoang, A. Hamid-ben-ahmed et al., Hybrid Excitation Synchronous Machines: Energy-Efficient Solution for Vehicles Propulsion, IEEE Transactions on Vehicular Technology, vol.58, issue.5, pp.2137-2149, 2009.

S. Hlioui, , 2008.

B. Nedjar, S. Hlioui, Y. Amara, L. Vido, M. Gabsi et al., A New Parallel Double Excitation Synchronous Machine, IEEE Transactions on Magnetics, vol.47, issue.9, pp.2252-2260, 2011.

A. Ammar, Modélisation et Optimisation d'un Générateur Synchrone à Double Excitation de Forte Puissance, 2013.

B. Gaussens, Machines synchrones à commutation de flux : de la modélisation numérique et analytique à l'exploration topologique, 2013.

A. Aden-diriye, S. Ouagued, Y. Amara, and G. Barakat, Performance analysis of a series hybrid excited synchronous machine by a hybrid analytical model, 2015 Tenth International Conference on Ecological Vehicles and Renewable Energies

M. Carlo and . Monaco, , 2015.

M. Aydin, S. Huang, and T. A. Lipo, Performance Evaluation of An Axial Flux Consequent Pole PM Motor Using Finite Element Analysis, 2003.

P. Paplicki, Field controled axial flux permanent magnet machine, 2013.

A. Pelizari and I. Chabu, Finite element analysis of hybrid excitation Axial flux machine for electric cars, Journal of Microwaves, Optoelectronics and Electromagnetic Applications, vol.13, issue.2, pp.223-239, 2014.

V. Naeini and M. Ardebili, New axial flux PM less synchronous machine with concentrated DC field on stator, International Journal of Electrical Power and Energy Systems, vol.67, pp.651-658, 2015.

L. Li, Etude et Mise au Point d'une Nouvelle Famille d'Alterno-Démarreurs pour Véhicules Hybrides et Electriques, 2006.

G. Kalokiris, A. Kladas, I. Hatzilau, S. Cofinas, and I. Gyparis, Advances in magnetic materials and their impact on electric machine design, Journal of Materials Processing Technology, vol.181, issue.1-3, pp.148-152, 2007.

Y. Guo, J. G. Zhu, J. Zhong, H. Lu, and J. Xun-jin, Measurement and Modeling of Rotational Core Losses of Soft Magnetic Materials Used in Electrical Machines: A Review, IEEE Transactions on Magnetics, vol.44, issue.2, pp.279-291, 2008.

Z. Wang, R. Masaki, S. Morinaga, Y. Enomoto, H. Itabashi et al., Development of an Axial Gap Motor With Amorphous Metal Cores, IEEE Transactions on Industry Applications, vol.47, issue.3, pp.1293-1299, 2011.

V. R. Rais, J. Turowski, and M. Turowski, Reluctance network analysis of coupled fields in a reversible electromagnetic motor, Electromagnetic Fields in Electrical Engineering, pp.279-283, 1988.

V. Ostovic, Dynamics of saturated electric machines, 1989.

J. K. Sykulski, Computational Magnetics, 1995.

A. Demenko, L. Nowak, and W. Szelag, Reluctance network formed by means of edge element method, IEEE Transactions On Magnetics, vol.34, issue.5, pp.2485-2488, 1998.

C. Chillet and J. Voyant, Design-oriented analytical study of a linear electromagnetic actuator by means of a reluctance network, IEEE Transactions on Magnetics, vol.37, issue.4, pp.3004-3011, 2001.

J. Hur, H. A. Toliyat, and J. Hong, 3-D time-stepping analysis of induction motor by new equivalent magnetic circuit network method, IEEE Transactions on Magnetics, vol.37, issue.5, pp.3225-3228, 2001.

J. Perho, Reluctance network for analysing induction machines, Acta Solytechnica Scandinavica, Electrical Engineering Series, vol.110, 2002.

H. Ghoizad, M. Mirsalim, M. Mirzayee, and W. Cheng, Coupled magnetic equivalent circuits and the analytical solution in the air-gap of squirrel cage induction machines, International Journal of Applied Electromagnetics and Mechanics, vol.25, issue.1-4, pp.749-754, 2007.

A. Demenko and D. Stachowiak, Electromagnetic torque calculation using magnetic network methods, International journal for computation and mathematics in electrical and electronic engineering (COMPEL), vol.27, issue.1, pp.17-26, 2008.
DOI : 10.1108/03321640810836591

M. Amrhein and P. T. Krein, 3-D Magnetic Equivalent Circuit Framework for Modeling Electromechanical Devices, IEEE Transactions on Energy Conversion, vol.24, issue.2, pp.397-405, 2009.
DOI : 10.1109/tec.2009.2016134

M. Amrhein and P. T. Krein, Force Calculation in 3-D Magnetic Equivalent Circuit Networks With a Maxwell Stress Tensor, IEEE Transactions on Energy Conversion, vol.24, issue.3, pp.587-593, 2009.

T. Raminosoa, J. A. Farooq, A. Djerdir, and A. Miraoui, Reluctance network modelling of surface permanent magnet motor considering iron nonlinearities, Energy Conversion and Management, vol.50, issue.5, pp.1356-1361, 2009.

B. Nedjar, Modélisation basée sur la méthode des réseaux de perméances en vue de l'optimisation de machines synchrones à simple et à double excitation, 2012.

S. Mohammadi and S. Vaez-zadeh, Analytical Modeling and Analysis of Axial-Flux Interior Permanent-Magnet Couplers, IEEE Transactions on Industrial Electronics, vol.50, issue.1, 2014.

B. Ackermann and R. Sottek, Analytical modeling of the cogging torque in permanent magnet motors, Electrical Engineering, vol.78, issue.2, pp.117-125, 1995.

L. Jian, K. T. Chau, Y. Gong, and W. Li, Analytical Calculation of Magnetic Field in Surface-Inset Permanent Magnet Motors, IEEE TRANSACTIONS ON MAGNETICS, vol.45, issue.10, pp.4688-4691, 2009.

Y. Amara and G. Barakat, Analytical Modeling of Magnetic Field in Surface Mounted Permanent-Magnet Tubular Linear Machines, IEEE Transactions on Magnetics, vol.46, issue.11, pp.1494-1497, 2010.

H. Bali, Y. Amara, G. Barakat, R. Ibtiouen, and M. Gabsi, Analytical modeling of open circuit magnetic field in wound field and series double excitation synchronous machines, IEEE Transactions on Magnetics, vol.46, issue.10, pp.3802-3815, 2010.

B. L. Gysen, K. J. Meessen, J. J. Paulides, and E. A. Lomonova, General formulation of the electromagnetic field distribution in machines and devices using fourier analysis, IEEE Transactions on Magnetics, vol.46, issue.1, pp.39-52, 2010.

A. Egea, G. Almandoz, J. Poza, G. Ugalde, and A. J. Escalada, Axial-Flux-Machine Modeling With the Combination of FEM-2-D and Analytical Tools, IEEE Transactions on Industry Applications, vol.48, issue.4, pp.1312-1326, 2012.

K. Boughrara, .. R. Ibtiouen, and .. T. Lubin, Analytical Prediction of Magnetic Field in Parallel Double Excitation and Spoke-Type Permanent-Magnet Machines Accounting for Tooth-Tips and Shape of Polar Pieces, IEEE Transactions on Magnetics, vol.48, issue.7, pp.2121-2137, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00673949

T. Lubin, .. S. Mezani, and .. A. Rezzoug, Two-Dimensionnal Analytical Calculation of Magnetic Field and electromagnetic Torque for Surface-Inset Permanent Magnet Motors, IEEE Transactions on Magnetics, vol.48, issue.6, pp.2080-2091, 2012.

T. Lubin, .. S. Mezani, and .. A. Rezzoug, Simple Analytical Expressions for the Force and Torque of Axial Magnetic Couplings, IEEE Transactions on Energy Conversion, vol.27, issue.2, pp.536-545, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00673920

R. L. Sprangers, J. J. Paulides, B. L. Gysen, and E. A. Lomonova, Towards Magnetic Saturation in Semi-Analytical Harmonic Modeling for Electric Machine Analysis, IEEE Transactions on Magnetics, vol.52, issue.2, 2016.

T. Lubin, S. Mezani, and A. Rezzoug, Archive ouverte HAL, 2012.

A. Parviainen, M. Niemelä, and J. Pyrhönen, Modeling of axial flux permanent-magnet machines, IEEE Trans. Ind. Appl, vol.40, issue.5, pp.1333-1340, 2004.

J. Azzouzi, G. Barakat, and B. Dakyo, Quasi-3-D analytical modeling of magnetic field of an axial flux permanent-magnet synchronous machine, IEEE Trans. Energy Convers, vol.20, issue.4, pp.746-752, 2005.

G. Cvetkovski, L. Petkovska, M. Cundev, and S. Gair, Quasi 3D FEM in function of an optimization analysis of a PM disk motor, Proc. Int. Conf. Electrical Machines, vol.4, pp.1871-1875, 2000.

H. Tiegna, A. Bellara, A. Amara, and G. Barakat, Analytical modeling of the opencircuit magnetic field in axial flux permanent-magnet machines with semi-closed slots, IEEE Trans. Magn, vol.48, issue.3, pp.1212-1226, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01966488

H. Tiegna, Y. Amara, and .. G. Barakat, A New Quasi-3-D Analytical Model of Axial Flux Permanent Magnet Machines, IEEE Transaction on Magnetics, vol.50, issue.2, pp.7020204-7020207, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01966495

H. Tiegna, Y. Amara, and G. Barakat, Validity domain of a quasi-3D multislice analytical model for synchronous axial flux machines with trapezoidal magnets, Eur. Phys. J. Appl. Phys, vol.70, issue.1, 2015.

E. P. Furlani and M. A. Knewtson, A three-dimensional field solution for permanent magnet axial-field motors, IEEE Trans. Magn, vol.33, issue.3, pp.2322-2325, 1997.

Y. N. Zhilichev, Three-dimensional analytic model of permanent magnet axial flux machine, IEEE Trans. Magn, vol.34, issue.6, pp.3897-3901, 1998.

O. De-la-barrière, S. Hlioui, H. B. Ahmed, and M. Gabsi, Three-Dimensional Analytical Modeling of a Permanent-Magnet Linear Actuator With Circular Magnets, IEEE Transactions on Magnetics, vol.46, issue.9, pp.3608-3626, 2010.

P. Jin, S. Fang, H. Lin, Z. Zhu, Y. Huang et al., Analytical Magnetic Field Analysis and Prediction of Cogging Force and Torque of a Linear and Rotary Permanent Magnet Actuator, IEEE Transactions on Magnetics, vol.47, issue.10, pp.3004-3007, 2011.

Y. Huang, B. Ge, J. Dong, H. L. , J. Zhu et al., 3-D Analytical Modeling of NoLoad Magnetic Field of Ironless Axial Flux Permanent Magnet Machine, IEEE Transactions on Magnetics, vol.48, issue.11, pp.2929-2932, 2012.

O. De-la-barrière, S. Hlioui, H. B. Ahmed, M. Gabsi, and M. Lobue, 3-D Formal Resolution of Maxwell Equations for the Computation of the No-Load Flux in an Axial Flux Permanent-Magnet Synchronous Machine, IEEE Transactions on Magnetics, vol.48, issue.1, pp.128-136, 2012.

B. Dolisy, T. Lubin, S. Mezani, and J. Leveque, Three-Dimensional Analytical Model for an Axial-Field Magnetic Coupling, Progress In Electromagnetics Research, vol.35, pp.173-182, 2014.
DOI : 10.2528/pierm14031405
URL : https://hal.archives-ouvertes.fr/hal-01011497

P. Jin, Y. Yuan, J. Minyi, F. Shuhua, L. Heyun et al., 3-D Analytical Magnetic Field Analysis of Axial Flux Permanent-Magnet Machine, IEEE Transactions on Magnetics, vol.50, issue.11, 2014.
DOI : 10.1109/tmag.2014.2323573

T. Lubin and A. Rezzoug, 3-D Analytical Model for Axial-Flux Eddy-Current Couplings and Brakes Under Steady-State Conditions, IEEE transactions on magnetics, vol.51, issue.20, pp.8203712-8203723, 2015.
DOI : 10.1109/tmag.2015.2455955

H. Gholizad, M. Mirsalim, and M. Mirzayee, Dynamic Analysis of Highly Saturated Switched Reluctance Motors Using Coupled Magnetic Equivalent Circuit and the Analytical Solution, Proceedings of CEM 2006, 2006.

A. Aden-diriye, Y. Amara, G. Barakat, S. Hlioui, O. De-la-barrière et al., Performance analysis of a radial flux PM machine using a hybrid analytical model and a MBG reluctance network model, European Journal of Electrical Engineering, vol.18, issue.1-2, pp.9-26, 2016.

A. Aden-diriye, S. Ouagued, S. Amara, and G. Barakat, Performance analysis of permanent magnet linear synchronous machines using a hybrid analytical model, Proceedings of LDIA 2015, International Symposium on Linear Drives for Industry Applications, pp.27-29, 2015.

S. Ouagued, Y. Amara, and G. Barakat, Comparison of hybrid analytical modelling and reluctance network modelling for pre-design purposes, Mathematics and Computers in Simulation, vol.130, pp.3-21, 2016.

F. Fiorillo and A. Novikov, An improved approach to power losses in magnetic laminations under nonsinusoidal induction waveform, IEEE Transactions

. Magnetics, , vol.26, pp.2904-2910, 1990.

M. Amrhein and P. T. Krein, 3-D Magnetic Equivalent Circuit Framework for Modeling Electromechanical Devices, IEEE Transactions on Energy Conversion, vol.24, issue.2, pp.397-405, 2009.

S. Ouagued, A. Aden-diriye, Y. Amara, and G. Barakat, Consideration of Magnetic Saturation in a New Hybrid Semi-Numerical Model, Compumag, 2015.

A. Aden-diriye, S. Ouagued, Y. Amara, and G. Barakat, Performance analysis of a series hybrid excited synchronous machine by a hybrid analytical model, Ecological Vehicles and Renewable Energies (EVER), 2015.

S. Ouagued, A. Aden-diriye, Y. Amara, and G. Barakat, A general framework based on a hybrid analytical model for the analysis and design of permanent magnet machines, IEEE Transactions on Magnetics, vol.51, issue.11, 2015.

A. Aden-diriye, Y. Amara, and G. Barakat, A hybrid modeling approach for the predesign of electrical machines, GDR EMR, 2017.

H. C. Lovatt and P. A. Watterson, Energy stored in permanent magnets, IEEE Transactions on Magnetics, vol.35, issue.1, pp.505-507, 1999.

P. A. Watterson, Energy calculation of a permanent magnet system by surface and flux integrals (the flux-mmf method), IEEE Transactions on Magnetics, vol.36, issue.2, pp.470-475, 2000.

J. R. Melcher, Continuum electromechanics, Massachusetts Institute of Technology (MIT), 1981.

J. Coulomb, A methodology for the determination of global electromechanical quantities from a finite element analysis and its application to the evaluation of magnetic forces, torques and stiffness, IEEE Transactions on Magnetics, vol.19, issue.6, pp.2514-2519, 1983.

O. Barré, Contribution à l'étude des formulations de calcul de la force magnétique en magnétostatique : approche numérique et validation expérimentale, 2003.

H. H. Woodoson and J. R. Melcher, Part : I and II, Electromechanical Dynamics, Massachusetts Institute of Technology, vol.3, 1968.

W. N. Fu and S. L. Ho, Error Estimation for the Computation of Force Using the Virtual Work Method on Finite Element Models, IEEE Transactions on Magnetics, vol.45, issue.3, pp.1388-1391, 2009.

B. Zhang and M. Doppelbauer, Iron Losses Calculation of an Axial Flux Machine based on 3D FEA Results corresponding to one-sixth electrical Period, IEEE Transactions on Energy Conversion, vol.32, issue.3, pp.1023-1030, 2017.

T. D. Nguyen, K. J. Tseng, C. Zhang, and S. Zhang, Loss Study of a Novel Axial Flux Permanent Magnet Machine, Proceedings of International Electric Machines & Drives Conference (IEMDC), pp.15-18, 2011.

Z. Wang, R. Masaki, S. Morinaga, Y. Enomoto, and H. Itabashi, Development of an Axial Gap Motor With Amorphous Metal Cores, IEEE Transactions on Industry Applications, vol.47, issue.3, pp.1293-1299, 2011.

G. S. Liew, W. L. Soong, N. Ertugrul, and J. Gayler, Analysis and performance investigation of an axial-field PM motor utilising cut amorphous magnetic material, Power Engineering Conference (AUPEC), 2010 20th Australasian Universities, pp.5-8, 2010.

H. Vansompel, P. Sergeant, and L. Dupre, Optimized Design Considering the Mass Influence of an Axial Flux Permanent-Magnet Synchronous Generator With Concentrated Pole Windings, IEEE Transactions on Magnetics, vol.46, issue.12, pp.4101-4107, 2010.

P. Sergeant, H. Vansompel, and L. Dupre, Influence of stator slot openings on losses and torque in axial flux permanent magnet machines, Mathematics and Computers in Simulation, vol.130, pp.22-31, 2016.

G. Bertotti, Hysteresis in Magnetism, 1998.

J. Alexandrova, H. Jussila, J. Nerg, and J. Pyrhönen, Comparison Between Models for Eddy-Current Loss Calculations in Rotor Surface-Mounted Permanent Magnets, the Proc. of XIX International Conference on Electrical Machines (ICEM), pp.1-6

. Sept, , 2010.

Y. Amara, J. Wang, and D. Howe, Analytical Prediction of Eddy-Current Loss in Modular Tubular Permanent-Magnet Machines, IEEE Transactions on Energy Conversion, vol.20, issue.4, pp.761-770, 2005.

A. Bellara, H. Bali, Y. Amara, G. Barakat, and P. Reghem, Analytical Prediction of Open-Circuit Eddy-Current Loss in Series Double Excitation Synchronous Machines, IEEE Transactions on Magnetics, vol.47, issue.9, pp.2261-2268, 2011.
URL : https://hal.archives-ouvertes.fr/hal-01966486

G. Bertotti, Physical interpretation of eddy current losses in ferromagnetic materia's. t.Theoretical considerations, Journal of Applied Physics, vol.57, issue.6, pp.2110-2117, 1985.

G. Bertotti, F. Fiorillo, and G. Soardo, The prediction of power losses in soft magnetic materials, Journal de Physique Colloques, vol.49, pp.1915-1919, 1988.
URL : https://hal.archives-ouvertes.fr/jpa-00229131

T. Chevalier, Modélisation et mesure des pertes fer dans les machines électriques,application à la machine asynchrone, 1999.

Y. Chen and P. Pillay, An Improved Formula for Lamination Core Loss Calculations in Machines Operating with High Frequency and High Flux Density Excitation, Proceedings Industry Applications Conference, 2002.

E. Barbisio, F. Fiorillo, and C. Ragusa, Predicting Loss in Magnetic Steels Under Arbitrary Induction Waveform and With Minor Hysteresis Loops, IEEETransactions on Magnetics, vol.40, issue.4, pp.1810-1819, 2004.

L. Chédot, Contribution à l'étude des machines synchrones à aimants permanents internes à large espace de fonctionnement. Application à l'alterno-démarreur, 2004.

M. H. Gracia, E. Lange, and K. Hameyer, Numerical Calculation of Iron Losses in Electrical Machines with a Modified Post-Processing Formula, 2007.

T. Gautreau, Estimation des pertes fer dans les machines électriques. Modèle d'hystérésis Loss Surface et application aux machines synchrones à aimants, 2007.

K. Yamazaki and N. Fukushima, Iron-Loss Modeling for Rotating Machines: Comparison Between Bertotti's Three-Term Expression and 3-D Eddy-Current Analysis, IEEE Transactions on Magnetics, vol.46, issue.8, pp.3121-3124, 2010.

J. Wang, K. Atallah, R. Chin, W. M. Arshad, and H. Lendenmann, Rotor Eddy-Current Loss in Permanent-Magnet Brushless AC Machines, IEEE Transactions on Magnetics, vol.46, issue.7, pp.2701-2707, 2010.

A. Krings and J. Soulard, Overview and Comparison of Iron Loss Models for Electrical Machines, 2010.

O. De-la-barrière, Modèles analytiques électromagnétiques bi et tri dimensionnels en vue de l'optimisation des actionneurs disques. Etude théorique et expérimentale des pertes magnétiques dans les matériaux granulaires, 2010.

P. A. Hargreaves, B. C. Mecrow, and R. Hall, Calculation Of Iron Loss In Electrical Generators Using Finite Element Analysis, IEEE Transactions on Industry Applications, vol.48, issue.5, pp.1368-1373, 2011.

M. Fratila, Contribution à la prise en compte des pertes fer dans la modalisation des machines electriques par elements finis, 2012.

F. Martin, Contribution au dimensionnement optimal de machines synchrones à aimants déposés en surface pour applications à hautes vitesses, 2013.

A. Krings, Iron Losses in Electrical Machines Influence of Material Properties Manufacturing Processes and Inverter Operation, 2014.

C. Steinmetz, On the law of hysteresis, Proceedings of the IEEE, vol.72, issue.2, pp.197-221, 1984.

Y. Laoubi, M. Dhifli, G. Verez, A. Amara, and G. Barakat, Open circuit performance analysis of a permanent magnet linear machine using a new hybrid analytical model, IEEE Trans. Magn, vol.51, issue.3, pp.1-4, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01966500

C. B. Rasmussen and E. Ritchie, A magnetic equivalent circuit approach for predicting PM motor performance, Proceedings of IEEE. Industry Applications Society Annual Meeting, vol.1, pp.10-17, 1997.

J. Bastos and G. Quichaud, 3D modelling of a non-linear anisotropic lamination, IEEE Trans. Magn, vol.21, issue.6, pp.2366-2369, 1985.

H. Tiegna, Y. Amara, and G. Barakat, Study of cogging torque in axial flux permanent magnet machines using an analytical model, IEEE Trans. Magn, vol.50, issue.2, p.7020904, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01966494

G. Barakat and Y. Amara, A simple and effective way to couple analytical formal solution of magnetic potential and reluctance network models, Proceedings of 9th IET International Conference on Computation in Electromagnetics (CEM 2014), 2014.

S. Ouagued, Y. Amara, and G. Barakat, Comparison of hybrid analytical modelling and reluctance network modelling for pre-design purposes, Mathematics and Computers in Simulation, vol.130, pp.3-21, 2016.

K. J. Pluk, J. W. Jansen, and E. A. Lomonova, 3-D Hybrid Analytical Modeling: 3-D Fourier Modeling Combined With Mesh-Based 3-D Magnetic Equivalent Circuits, IEEE Trans. Magn, vol.51, issue.12, p.8208614, 2015.