N. Debbah, M. A. Benhamida, H. Ennassiri, Y. Amara, and G. Barakat, Modélisation d'une Machine Synchronè a Double Excitation Série par un Circuit de Réluctances Maillé, 2016.

M. A. Benhamida, H. Ennassiri, Y. Amara, and G. Barakat, Interpolation coupling for reluctance network models dedicated to the predesign of Switching Flux Permanent Magnet machines, 2016.

S. Ouagued, M. A. Benhamida, Y. Amara, and G. Barakat, Thermal modeling of tubular linear machines using a hybrid analytical method

M. Dhifli, M. A. Benhamida, H. Ennassiri, F. Chabour, Y. Amara et al., Modeling of axial flux switching permanent magnet machine using magnetic equivalent circuit, International Symposium on Electromagnetic Fields (ISEF), 2015.

H. Tiegna, ContributionàContributionà la modélisation analytique des machines synchronesàsynchrones`synchronesà flux axiaì a aimants permanentsàpermanents`permanentsà attaque directe en vue de leur dimensionnement. application auxéoliennesauxéoliennes, 2013.

A. Bellara, Modélisation analytique par le formalisme de maxwell des machines synchronesàsynchrones`synchronesà aimants permanentsàpermanentsà flux axial en vue de leur dimensionnement, 2011.

M. Dhifli, Contribution au développement de structures disco¨?desdisco¨?des de machinesélectriquesà machinesélectriquesmachinesélectriques`machinesélectriquesà aimants permanentsàpermanents`permanentsà commutation de flux pour l'´ eolien, 2016.

N. Abdel-karim, Dimensionnement et optimisation d'un aérogénérateuraérogénérateur`aérogénérateurà aimants permanentsàpermanentsà flux axial de petite puissance, 2008.

J. Azzouzi, ContributionàContribution`Contributionà la modélisation etàet`età l'optimisation des machines synchronesàchrones`chronesà aimants permanentsàpermanentsà flux axial. application au cas de l'aérogénérateur, 2007.

H. Ennassiri, Etude et diagnostic de défauts dans les machines synchronesàsynchrones`synchronesà commutation de flux dédiées au véhiculé electrique hybride, 2018.

W. Tong, Wind power generation and wind turbine design, 2010.

Z. Zhang, A. Matveev, S. Øvrebø, R. Nilssen, and A. Nysveen, State of the art in generator technology for offshore wind energy conversion systems, 2011 IEEE International Electric Machines Drives Conference (IEMDC), pp.1131-1136, 2011.

, Renewables 2017 global status report

N. Goudarzi and W. D. Zhu, A review on the development of wind turbine generators across the world, International Journal of Dynamics and Control, vol.1, issue.2, pp.192-202, 2013.

, Your source for renewable energy information

, Global wind report, 2016.

, 2016 european statistics

, 2016 wind technologies market report

H. Link, W. Lacava, J. Van-dam, B. Mcniff, S. Sheng et al., Gearbox reliability collaborative project report: findings from phase 1 and phase 2 testing, 2011.

, Fast v8 offers new modeling and analysis features

, Latest news middle east and africa

H. A. Khazdozian, Improved design of permanent magnet generators for large scale wind turbines, 2016.

, Global wind market update 2016-demand side analysis

E. De-vries, in Electrical Drives for Direct Drive Renewable Energy Systems, ser, pp.139-157, 2013.

T. Wang, F. Chu, and Q. Han, Fault diagnosis for wind turbine planetary ring gear via a meshing resonance based filtering algorithm, ISA Transactions, vol.67, pp.173-182, 2017.

, Powerful analysis of wind turbine gearboxes

R. Lateb, Modélisation des machines asynchrones et synchrones a aimants avec prise en compte des harmoniques d'espace et de temps: applicationàapplicationà la propulsion marine par pod, 2006.

C. Belalahy, Dimensionnement d'une machine synchro-réluctantè a excitation homopolaire par réseaux de perméances, Vandoeuvre-les-Nancy, INPL, 2008.

G. Bywaters, V. John, J. Lynch, P. Mattila, G. Norton et al., Northern power systems windpact drive train alternative design study report, 2004.

, E-126 wind turbine technical data

, Siemens d3 platform-3.0-mw and 3.2-mw direct drive wind turbines

, Siemens industry presents new gearless direct drive wind generator

L. Soderlund, J. T. Eriksson, J. Salonen, H. Vihriala, and R. Perala, A permanentmagnet generator for wind power applications, IEEE Transactions on Magnetics, vol.32, issue.4, pp.2389-2392, 1996.

E. Muljadi, C. P. Butterfield, and Y. Wan, Axial-flux modular permanentmagnet generator with a toroidal winding for wind-turbine applications, IEEE Transactions on Industry Applications, vol.35, issue.4, pp.831-836, 1999.

M. Dubois, H. Polinder, and J. Ferreira, Comparison of generator topologies for direct-drive wind turbines, Proceedings of NORPIE'00, pp.22-26, 2000.

J. Legranger, ContributionàContribution`Contributionà l'´ etude des machines brushlessàbrushlessà haut rendement dans les applications de moteurs-générateurs embarqués, 2009.

A. Daanoune, ContributionàContributionà l'etude etàet`età l'optimisation d'une machine synchronè a double excitation pour véhicules hybrides, 2012.

P. Monjean, Optimisation de l'architecture et des fluxénergétiquesfluxénergétiques de centralesàénergiescentrales`centralesà centralesàénergies renouvelables offshore et onshoré equipées de liaisons en continu, Ph.D. dissertation, Arts et Métiers ParisTech, 2012.

, Components and services

. Applications, soft-magnetic-composites/applications/ [40] fast curing metal adhesive for elevated temperatures

H. Bali, Etude des alternateursàalternateurs`alternateursà double excitation, Ecole nationale supérieure polytechnique, 2011.

, Share of different turbine capacitys on the cumulative number of turbines, ? db communicate=%27Windenergieeinspeisung.daten%27&p lang=eng&img id=, p.433

, Gode wind 1 and 2 wind farm

, Dudgeon offshore wind farm

, vejamate offshore wind farm

, Bard offshore 1 wind farm

, Global tech 1 wind farm

, Adwen offshore

, Adwen offshore

, Adwen offshore

. Nordseeone and . Farm,

. Thorntonbank and . Farm,

, Seatitan 10mw wind turbine : technical specification

, Haliade* 150-6mw offshore wind turbine

, wind turbine : technical specification

, technical data

A. Boglietti, A. Cavagnino, D. Staton, M. Shanel, M. Mueller et al., Evolution and modern approaches for thermal analysis of electrical machines, IEEE Transactions on industrial electronics, vol.56, issue.3, pp.871-882, 2009.

R. Lateb, N. Takorabet, and F. Meibody-tabar, Effect of magnet segmentation on the cogging torque in surface-mounted permanent-magnet motors, IEEE Transactions on Magnetics, vol.42, issue.3, pp.442-445, 2006.

J. Perho, Reluctance network for analysing induction machines, 2002.

J. Sykulski, Computational magnetics, 2012.

C. J. Carpenter, Magnetic equivalent circuits, Electrical Engineers, Proceedings of the Institution of, vol.115, pp.1503-1511, 1968.

C. Chillet and J. Y. Voyant, Design-oriented analytical study of a linear electromagnetic actuator by means of a reluctance network, IEEE Transactions on Magnetics, vol.37, issue.4, pp.3004-3011, 2001.

S. Ouagued, Y. Amara, and G. Barakat, Cogging force analysis of linear permanent magnet machines using a hybrid analytical model, IEEE Transactions on Magnetics, issue.99, pp.1-1, 2016.

J. De-boeij, E. Lomonova, and A. Vandenput, Modeling ironless permanent-magnet planar actuator structures, IEEE Transactions on Magnetics, vol.42, issue.8, pp.2009-2016, 2006.

K. J. Meessen, B. L. Gysen, J. J. Paulides, and E. A. Lomonova, Halbach permanent magnet shape selection for slotless tubular actuators, IEEE Transactions on Magnetics, vol.44, issue.11, pp.4305-4308, 2008.

S. Williamson and C. I. Mcclay, Optimisation of the geometry of closed rotor slots for cage induction motors, Thirtieth IAS Annual Meeting, IAS '95., Conference Record of the 1995 IEEE, vol.1, pp.507-514, 1995.

C. B. Rasmussen and E. Ritchie, A magnetic equivalent circuit approach for predicting pm motor performance, Industry Applications Conference, 1997. ThirtySecond IAS Annual Meeting, IAS '97., Conference Record of the 1997 IEEE, vol.1, pp.10-17, 1997.

B. L. Gysen, E. Ilhan, K. J. Meessen, J. J. Paulides, and E. A. Lomonova, Modeling of flux switching permanent magnet machines with fourier analysis, IEEE Transactions on Magnetics, vol.46, issue.6, pp.1499-1502, 2010.

S. Bazhar, J. Fontchastagner, N. Takorabet, and N. Labbe, Hybrid analytical model coupling laplace x2019;s equation and reluctance network for electrical machines, IEEE Transactions on Magnetics, vol.53, issue.6, pp.1-4, 2017.

A. Mahyob, Modélisation des machinesélectriquesmachinesélectriques tournantes défectueuses par la méthode des réseaux de perméances : ApplicationàApplication`Applicationà la machine asynchrone, 2009.

B. Nedjar, Modélisation basée sur la méthode des réseaux de perméances en vue de l'optimisation de machines synchronesàsynchronesà simple etàet`età double excitation, 2011.

S. Ouagued, A. Diriyé, Y. Amara, and G. Barakat, Consideration of magnetic saturation in a new hybrid semi-numerical model, Proc. COMPUMAG, pp.1-2, 2015.

M. Chiampi, D. Chiarabaglio, and M. Repetto, An accurate investigation on numerical methods for nonlinear magnetic field problems, Journal of magnetism and magnetic materials, vol.133, issue.1-3, pp.591-595, 1994.

G. Verez, ContributionàContribution`Contributionà l'´ etude desémissionsdesémissions vibro-acoustiques des machinesélectriques machinesélectriques. cas des machines synchronesàsynchrones`synchronesà aimants dans un contexte automobile, 2014.

G. C. Stone, Advancements during the past quarter century in on-line monitoring of motor and generator winding insulation, IEEE Transactions on Dielectrics and Electrical Insulation, vol.9, issue.5, pp.746-751, 2002.

F. Magnussen, On design and analysis of synchronous permanent magnet machines for field-weakening operation in hybrid electric vehicles, 2004.

G. Li, ContributionàContributionà la conception des machines electriquesàelectriques`electriquesà rotor passif pour des applications critiques: Modélisations electromagnétiques et thermiques sur cycle de fonctionnement, etude du fonctionnement en mode dégradé, 2011.

A. Boglietti, A. Cavagnino, and D. Staton, Determination of critical parameters in electrical machine thermal models, IEEE Transactions on Industry Applications, vol.44, issue.4, pp.1150-1159, 2008.
DOI : 10.1109/07ias.2007.60

S. Mezani, N. Takorabet, and B. Laporte, A combined electromagnetic and thermal analysis of induction motors, IEEE Transactions on Magnetics, vol.41, issue.5, pp.1572-1575, 2005.
DOI : 10.1109/tmag.2005.845044

P. Romanazzi and D. A. Howey, Air-gap convection in a switched reluctance machine, Ecological Vehicles and Renewable Energies (EVER), 2015 Tenth International Conference on, pp.1-7, 2015.
DOI : 10.1109/ever.2015.7112962
URL : http://arxiv.org/pdf/1502.05902

C. Gazley, Heat transfer characteristics of the rotational and axial flow between concentric cylinders, Trans. ASME, vol.80, issue.1, pp.79-90, 1958.

K. M. Becker and J. Kaye, Measurement of diabatic flow in an annulus with an inner rotating cylinder, 1960.
DOI : 10.1115/1.3684335

I. Bjorklund and W. Kays, Heat transfer between concentric rotating cylinders, Journal of Heat Transfer, vol.80, pp.79-90, 1959.

M. Bouafia, Y. Bertin, J. Saulnier, and P. Ropert, Analyse expérimentale des transferts de chaleur en espace annulairé etroit et rainuré avec cylindre intérieur tournant, International journal of heat and mass transfer, vol.41, issue.10, pp.1279-1291, 1998.
DOI : 10.1016/s0017-9310(97)00317-7

G. I. Taylor, Stability of a viscous liquid contained between two rotating cylinders, Philosophical Transactions of the Royal Society of London. Series A, Containing Papers of a Mathematical or Physical Character, vol.223, pp.289-343, 1923.
DOI : 10.1098/rspa.1923.0013
URL : http://rspa.royalsocietypublishing.org/content/102/718/541.full.pdf

D. Staton, A. Boglietti, and A. Cavagnino, Solving the more difficult aspects of electric motor thermal analysis in small and medium size industrial induction motors, IEEE Transactions on Energy Conversion, vol.20, issue.3, pp.620-628, 2005.

R. A. Matula, Electrical resistivity of copper, gold, palladium, and silver, Journal of Physical and Chemical Reference Data, vol.8, issue.4, pp.1147-1298, 1979.
DOI : 10.1063/1.555614

H. Dogan, L. Garbuio, H. Nguyen-xuan, B. Delinchant, A. Foggia et al., Multistatic reluctance network modeling for the design of permanent-magnet synchronous machines, IEEE Transactions on, vol.49, issue.5, pp.2347-2350, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00767045

D. M. Araujo, J. Coulomb, O. Chadebec, and L. Rondot, A hybrid boundary element method-reluctance network method for open boundary 3-d nonlinear problems, IEEE Transactions on, vol.50, issue.2, pp.77-80, 2014.
DOI : 10.1109/tmag.2013.2281759

H. Nguyen-xuan, H. Dogan, S. Perez, L. Gerbaud, L. Garbuio et al., Efficient reluctance network formulation for electrical machine design using optimization, IEEE Transactions on, vol.50, issue.2, pp.869-872, 2014.
DOI : 10.1109/tmag.2013.2282407

Q. Yu, X. Wang, and Y. Cheng, Magnetic modeling of saliency effect for saturated electrical machines with a new calculation method

M. Jamil and X. Yang, A literature survey of benchmark functions for global optimisation problems, International Journal of Mathematical Modelling and Numerical Optimisation, vol.4, issue.2, pp.150-194, 2013.

X. Yao and Y. Liu, Fast evolutionary programming, Evolutionary Programming, vol.3, pp.451-460, 1996.

M. J. Powell, An efficient method for finding the minimum of a function of several variables without calculating derivatives, The Computer Journal, vol.7, issue.2, pp.155-162, 1964.

H. Rosenbrock, An automatic method for finding the greatest or least value of a function, The Computer Journal, vol.3, issue.3, pp.175-184, 1960.

M. F. Møller, A scaled conjugate gradient algorithm for fast supervised learning, Neural Networks, vol.6, issue.4, pp.525-533, 1993.

R. Eberhart and J. Kennedy, A new optimizer using particle swarm theory, Micro Machine and Human Science, 1995. MHS'95., Proceedings of the Sixth International Symposium on, pp.39-43, 1995.

D. Wang, D. Tan, and L. Liu, Particle swarm optimization algorithm: an overview, Soft Computing, pp.1-22, 2017.

Y. Shi and R. Eberhart, A modified particle swarm optimizer, Evolutionary Computation Proceedings, 1998. IEEE World Congress on Computational Intelligence, pp.69-73, 1998.

M. Clerc and J. Kennedy, The particle swarm-explosion, stability, and convergence in a multidimensional complex space, IEEE transactions on Evolutionary Computation, vol.6, issue.1, pp.58-73, 2002.

C. Darwin and G. Beer, The origin of species. Dent, 1951.

D. Beasley, D. R. Bull, and R. R. Martin, An overview of genetic algorithms: Part 1, fundamentals, University computing, vol.15, issue.2, pp.56-69, 1993.

L. Davis, Genetic algorithms and simulated annealing, 1987.

J. J. Grefenstette, Optimization of control parameters for genetic algorithms, IEEE Transactions on systems, man, and cybernetics, vol.16, issue.1, pp.122-128, 1986.

L. Daviis, Handbook of genetic algorithms, 1991.

Z. Michalewicz, Genetic algorithms+ data structures= evolution program, 1992.

D. E. Goldberg and K. Deb, A comparative analysis of selection schemes used in genetic algorithms, Foundations of genetic algorithms, vol.1, pp.69-93, 1991.

P. Ngatchou, A. Zarei, and A. El-sharkawi, Pareto multi objective optimization, Proceedings of the 13th International Conference on, Intelligent Systems Application to Power Systems, pp.84-91, 2005.

K. Deb, A. Pratap, S. Agarwal, and T. Meyarivan, A fast and elitist multiobjective genetic algorithm: Nsga-ii, IEEE Transactions on Evolutionary Computation, vol.6, issue.2, pp.182-197, 2002.

N. Srinivas and K. Deb, Muiltiobjective optimization using nondominated sorting in genetic algorithms, Evolutionary Computation, vol.2, issue.3, pp.221-248, 1994.

E. Zitzler, M. Laumanns, and L. Thiele, Spea2: Improving the strength pareto evolutionary algorithm, 2001.

E. Zitzler, Evolutionary algorithms for multiobjective optimization: Methods and applications, 1999.

S. Mostaghim and J. Teich, Strategies for finding good local guides in multiobjective particle swarm optimization (mopso), Swarm Intelligence Symposium, 2003. SIS'03. Proceedings of the, pp.26-33, 2003.

J. Alvarez-benitez, R. Everson, and J. Fieldsend, A mopso algorithm based exclusively on pareto dominance concepts," in Evolutionary Multi-Criterion Optimization, pp.459-473, 2005.

M. J. Powell, Algorithms for nonlinear constraints that use lagrangian functions, Mathematical Programming, vol.14, issue.1, pp.224-248, 1978.

D. P. Bertsekas, Nonlinear programming. Athena scientific Belmont, 1999.

X. Wang, H. Polinder, D. Lahaye, and J. A. Ferreira, Fe based multi-objective optimization of a 3.2mw brushless doubly-fed induction machine, 2017 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD), pp.89-94, 2017.

X. Wang, T. D. Strous, D. Lahaye, H. Polinder, and J. A. Ferreira, Modeling and optimization of brushless doubly-fed induction machines using computationally efficient finite-element analysis, IEEE Transactions on Industry Applications, vol.52, issue.6, pp.4525-4534, 2016.

A. Daghigh, H. Javadi, and H. Torkaman, Design optimization of direct-coupled ironless axial flux permanent magnet synchronous wind generator with low cost and high annual energy yield, IEEE Transactions on Magnetics, vol.52, issue.9, pp.1-11, 2016.

P. Akiki, M. Hage-hassan, P. Dessante, J. C. Vannier, M. Bensetti et al., Multi-physics modeling and optimization of a multi-v-shape ipm with concentrated winding, 2017 IEEE International Electric Machines and Drives Conference (IEMDC), pp.1-7, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01677520

M. Desvaux, B. Multon, H. B. Ahmed, S. Sire, A. Fasquelle et al., Gear ratio optimization of a full magnetic indirect drive chain for wind turbine applications, 2017 Twelfth International Conference on Ecological Vehicles and Renewable Energies (EVER), pp.1-9, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01598095

X. Jannot, J. C. Vannier, C. Marchand, M. Gabsi, J. Saint-michel et al., Multiphysic modeling of a high-speed interior permanent-magnet synchronous machine for a multiobjective optimal design, IEEE Transactions on Energy Conversion, vol.26, issue.2, pp.457-467, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00633645

H. Li, Z. Chen, and H. Polinder, Optimization of multibrid permanent-magnet wind generator systems, IEEE Transactions on Energy Conversion, vol.24, issue.1, pp.82-92, 2009.

A. Grauers, Design of direct-driven permanent-magnet generators for wind turbines, 1996.

, Find pareto front of multiple fitness functions using genetic algorithm

P. Tchakoua, R. Wamkeue, M. Ouhrouche, F. Slaoui-hasnaoui, T. A. Tameghe et al., Wind turbine condition monitoring: State-of-the-art review, new trends, and future challenges, Energies, vol.7, issue.4, pp.2595-2630, 2014.

F. Spinato, P. J. Tavner, G. Van-bussel, and E. Koutoulakos, Reliability of wind turbine subassemblies, IET Renewable Power Generation, vol.3, issue.4, pp.387-401, 2009.

D. Chan and J. Mo, Life cycle reliability and maintenance analyses of wind turbines, 1st International Conference on Energy and Power, ICEP2016, vol.110, pp.14-16, 2017.

M. Sepulveda, J. Shek, P. R. Thies, E. Oterkus, P. Davies et al., Physicsbased gearbox failure model for multi-mw offshore wind turbines, ASME 2017 36th International Conference on Ocean, Offshore and Arctic Engineering, pp.3-5, 2017.

P. Tavner, Offshore wind turbines: Reliability, The Institution of Engineering and Technology, 2012.

W. Musial, S. Butterfield, and B. Mcniff, Improving wind turbine gearbox reliability, European Wind Energy Conference, pp.7-10, 2007.

A. Ragheb and M. Ragheb, Wind turbine gearbox technologies, pp.1-8, 2010.

F. Oyague, Gearbox modeling and load simulation of a baseline 750-kw wind turbine using state-of-the-art simulation codes, National Renewable Energy Laboratory (NREL), 2009.

Y. Feng, Y. Qiu, C. J. Crabtree, H. Long, and P. J. Tavner, Monitoring wind turbine gearboxes, Wind Energy, vol.16, issue.5, pp.728-740, 2013.

B. Lu, Y. Li, X. Wu, and Z. Yang, A review of recent advances in wind turbine condition monitoring and fault diagnosis, 2009 IEEE Power Electronics and Machines in Wind Applications, pp.1-7, 2009.

C. Armstrong, Power-transmitting device, vol.687, 1901.

K. Atallah and D. Howe, A novel high-performance magnetic gear, IEEE Transactions on Magnetics, vol.37, issue.4, pp.2844-2846, 2001.

K. Atallah, S. D. Calverley, and D. Howe, Design, analysis and realisation of a high-performance magnetic gear, IEE Proceedings-Electric Power Applications, vol.151, pp.135-143, 2004.

S. Gerber, Evaluation and design aspects of magnetic gears and magnetically geared electrical machines, 2015.

N. W. Frank and H. A. Toliyat, Analysis of the concentric planetary magnetic gear with strengthened stator and interior permanent magnet (ipm) inner rotor, 2010 IEEE Energy Conversion Congress and Exposition, pp.2977-2984, 2010.

K. K. Uppalapati, W. Bomela, J. Z. Bird, M. Calvin, and J. Wright, Construction of a low speed flux focusing magnetic gear, 2013 IEEE Energy Conversion Congress and Exposition, pp.2178-2184, 2013.

P. O. Rasmussen, T. O. Andersen, F. T. Joergensen, and O. Nielsen, Development of a high performance magnetic gear, 38th IAS Annual Meeting on Conference Record of the Industry Applications Conference, vol.3, pp.1696-1702, 2003.

A. Bensalah, Conception d'aérogénérateurs et hydrogénérateurshydrogénérateursà concentration de flux sans aimants terres rare, 2020.