, Surface chemical analysis-scanning-probe microscopy-determination of geometric quantities using spm : Calibration of measuring systems ISO 11952:2014 International Organization for Standardization, 2014.

G. Dai, F. Pohlenz, T. Dziomba, M. Xu, A. Diener et al., Accurate and traceable calibration of two-dimensional gratings Measurement Science and Technology 18 415, 2007.

S. Ducourtieux and B. Poyet, Development of a metrological atomic force microscope with minimized abbe error and differential interferometer-based real-time position control, Measurement Science and Technology, vol.22, p.94010, 2011.

B. Poyet, Conception d'un microscope à force atomique métrologique, 2010.

Y. Boukellal, Contribution à la mise en place d'un microscope à force atomique métrologique (mafm) : Conception d'une tête afm métrologique et caractérisation métrologique de l'instrument, 2015.

Y. Boukellal, S. Ducourtieux, and B. Poyet, Improvement of the LNE's metrological atomic force microscope (mAFM) performance : Design of new mAFM head dedicated for nanometrology applications 16th International Congress of Metrology ed, 2013.

, Evaluation of measurement data-Supplement 1 to the "Guide to the expression of uncertainty in measurement"-Propagation of distributions using a Monte Carlo method 1st ed (BIPM), J, 2008.

M. Morris, Factorial sampling plans for preliminary computational experiments, Technometrics, vol.33, pp.161-174, 1991.

I. Sobol, Sensitivity estimates for nonlinear mathematical models Mathematical Modelling and Computational Experiments, vol.1, pp.407-414, 1993.

I. Sobol, Global sensitivity indices for nonlinear mathematical models and their monte carlo estimates, Mathematics and Computers in Simulation, vol.55, pp.271-280, 2001.

, Evaluation of measurement data-Supplement 2 to the "Guide to the expression of uncertainty in measurement, Extension to any number of output quantities 1st ed (BIPM), 2011.

, International vocabulary of metrology-basic and general concepts and associated terms (vim)

G. Dai, L. Koenders, F. Pohlenz, T. Dziomba, and H. Danzebrink, Accurate and traceable calibration of one-dimensional gratings, Measurement Science and Technology, vol.16, pp.1241-1249, 2005.

, Spécification géométrique des produits (gps)-État de surface : Méthode du profil ; Étalons-partie 1 : Mesures matérialisées ISO 5436-1:2000 International Organization for Standardization, vol.5436, 2000.

R. Breil, T. Fries, J. Garnaes, J. Haycocks, D. Hüser et al., Intercomparison of scanning probe microscopes Precision Engineering, vol.26, pp.296-305, 2002.

L. Koenders, R. Bergmans, J. Garnaes, J. Haycocks, N. Korolev et al., Comparison on nanometrology : Nano 2-step height Metrologia, vol.40, pp.4001-04001, 2003.

, DFM 2008 Nano5-2d grating Final report

, BIPM 2006 The international system of units (SI) 8th ed (BIPM) ISBN

R. Young, W. J. Scire, and F. , The topografiner : An instrument for measuring surface microtopography, Review of Scientific Instruments, vol.43, pp.999-1011, 1972.

G. Binnig, H. Rohrer, C. Gerber, and E. Weibel, Surface studies by scanning tunneling microscopy, Physical Review Letters, vol.49, pp.57-61, 1982.

G. Binnig, C. Quate, and C. Gerber, Atomic force microscope, Phys. Rev. Lett, vol.56, issue.9, pp.930-933, 1986.

J. Jones, On the determination of molecular fields. II. from the equation of state of a gas, Proceedings of the Royal Society A : Mathematical, Physical and Engineering Sciences, vol.106, pp.463-477, 1924.

W. Pauli, for the discovery of the exclusion principle, also called the pauli principle, Physics, pp.23-45, 1942.

H. Hamaker, The london-van der waals attraction between spherical particles Physica, vol.4, pp.1058-1072, 1937.

G. Meyer and N. Amer, Novel optical approach to atomic force microscopy, Applied Physics Letters, vol.53, pp.1045-1047, 1988.

S. Alexander, L. Hellemans, O. Marti, J. Schneir, V. Elings et al., An atomic-resolution atomic-force microscope implemented using an optical lever, Journal of Applied Physics, vol.65, pp.164-167, 1989.

M. Araki, Control Systems, Robotics and Automation, vol.2, p.1848265913, 2009.

Y. Martin, C. Williams, and H. Wickramasinghe, Atomic force microscope-force mapping and profiling on a sub 100-Å scale, Journal of Applied Physics, vol.61, pp.4723-4729, 1987.

T. Albrecht, P. Grütter, D. Horne, and D. Rugar, Frequency modulation detection using high-q cantilevers for enhanced force microscope sensitivity, Journal of Applied Physics, vol.69, pp.668-673, 1991.

J. Kramar, Nanometre resolution metrology with the molecular measuring machine, Measurement Science and Technology, vol.16, pp.2121-2128, 2005.

J. Schneir, Design of an atomic force microscope with interferometric position control, Journal of Vacuum Science & Technology B : Microelectronics and Nanometer Structures, vol.12, p.3561, 1994.

H. Danzebrink, L. Koenders, G. Wilkening, Y. A. Kunzmann, and H. , Advances in scanning force microscopy for dimensional metrology, CIRP Annals-Manufacturing Technology, vol.55, pp.841-878, 2006.

S. Gonda, T. Doi, T. Kurosawa, Y. Tanimura, N. Hisata et al., Real-time, interferometrically measuring atomic force microscope for direct calibration of standards, Rev. Sci. Instrum, vol.70, p.3362, 1999.

I. Misumi, S. Gonda, Q. Huang, T. Keem, T. Kurosawa et al., Sub-hundred nanometre pitch measurements using an AFM with differential laser interferometers for designing usable lateral scales, Measurement Science and Technology, vol.16, pp.2080-2090, 2005.

J. Piot, J. Qian, H. Pirée, G. Kotte, J. Pétry et al., Design of a sample approach mechanism for a metrological atomic force microscope Measurement, vol.46, pp.739-746, 2013.

P. Klapetek, M. Valtr, and M. Matula, A long-range scanning probe microscope for automotive reflector optical quality inspection, Measurement Science and Technology, vol.22, p.94011, 2011.

G. Picotto and M. Pisani, A sample scanning system with nanometric accuracy for quantitative SPM measurements, Ultramicroscopy, vol.86, pp.247-254, 2001.

J. Kim, J. Kim, B. Park, and T. Eom, Measurement of microscope calibration standards in nanometrology using a metrological atomic force microscope, Measurement Science and Technology, vol.17, pp.1792-1800, 2006.

F. Meli and R. Thalmann, Long-range AFM profiler used for accurate pitch measurements, Measurement Science and Technology, vol.9, pp.1087-1092, 1998.

B. Eves, Design of a large measurement-volume metrological atomic force microscope (AFM) Measurement Science and Technology, vol.20, p.84003, 2009.

M. Lu, S. Gao, J. Q. Cui, J. Du, H. Gao et al., An atomic force microscope head designed for nanometrology, Measurement Science and Technology, vol.18, pp.1735-1739, 2007.

J. Haycocks and K. Jackson, Traceable calibration of transfer standards for scanning probe microscopy Precision Engineering, vol.29, pp.168-175, 2005.

G. Dai, F. Pohlenz, H. Danzebrink, M. Xu, K. Hasche et al., Metrological large range scanning probe microscope, Rev. Sci. Instrum, vol.75, p.962, 2004.

A. Mazzeo, A. Stein, D. Trumper, and R. Hocken, Atomic force microscope for accurate dimensional metrology Precision Engineering, vol.33, pp.135-149, 2009.

C. Werner, P. Rosielle, and M. Steinbuch, Design of a long stroke translation stage for, AFM International Journal of Machine Tools and Manufacture, vol.50, pp.183-190, 2010.

A. Yacoot, R. Leach, B. Hughes, C. Giusca, C. Jones et al., Dimensional nanometrology at the national physical laboratory, Fifth International Symposium on Instrumentation Science, 2008.

D. Lee, D. Kim, D. Gweon, and J. Park, A calibrated atomic force microscope using an orthogonal scanner and a calibrated laser interferometer, Applied Surface Science, vol.253, pp.3945-3951, 2007.

M. Bienias, S. Gao, K. Hasche, R. Seemann, and K. Thiele, A metrological scanning force microscope used for coating thickness and other topographical measurements, Applied Physics A : Materials Science & Processing, vol.66, pp.837-842, 1998.

C. Chao-jung, Development of a traceable atomic force microscope with interferometer and compensation flexure stage, 2003.

R. Dixson, R. Koening, V. Tsai, J. Fu, and T. Vorburger, Dimensional metrology with the NIST calibrated atomic force microscope Metrology, Inspection, and Process Control for Microlithography XIII ed Singh B (SPIE), 1999.

T. Quinn, Practical realization of the definition of the metre, including recommended radiations of other optical frequency standards, vol.40, pp.103-133, 2001.

Y. Boukellal and S. Ducourtieux, Implementation of a four quadrant optic fibre bundle as a deflection sensor to get rid of heat sources in an AFM head, Measurement Science and Technology, vol.26, p.95403, 2015.

H. Cook and L. Marzetta, An automated fringe counting interferometer for use in the calibration of line scales, J. Res. Natl. Bur. Stand, vol.65, pp.129-140, 1961.

B. Edlén, The refractive index of air Metrologia, vol.2, pp.71-80, 1966.

K. Birch and M. Downs, Correction to the updated edlén equation for the refractive index of air Metrologia, vol.31, pp.315-316, 1994.

P. Giacomo, News from the BIPM Metrologia, vol.20, pp.25-30, 1984.

K. Alder, The Measure of All Things : The Seven-Year Odyssey and Hidden Error That Transformed the World, 2002.

F. Gerbaux, Le mêtre de marbre de la rue de Vaugirard (Typ. Firmin-Didot et cie), 1904.

B. Page, Calibration of meter line standards of length at the national bureau of standards, J. Res. Natl. Bur. Stand, vol.54, pp.1-14, 1955.

B. Guinot, Application of general relativity to metrology Metrologia, vol.34, pp.261-290, 1997.

A. Wallard, News from the BIPM-2003 Metrologia, vol.41, pp.99-108, 2004.

A. Wallard, News from the BIPM-2005 Metrologia, vol.43, pp.175-182, 2006.

L. Hale, Principles and techniques for designing precision machines

R. Vallance, M. C. Slocum, and A. , Precisely positioning pallets in multi-station assembly systems Precision Engineering, vol.28, pp.218-231, 2004.

C. Evans, Precision Engineering (Cranfield Pr) ISBN 1871315018, 1991.

R. Leach, Fundamental Principles of Engineering Nanometrology (Micro and Nano Technologies) (William Andrew), 2009.

, Evaluation of measurement data-Guide to the expression of uncertainty in measurement 1st ed (BIPM), J, 2008.

V. Korpelainen, J. Seppä, and A. Lassila, Design and characterization of MIKES metrological atomic force microscope Precision Engineering, vol.34, pp.735-744, 2010.

A. Küng, F. Meli, A. Nicolet, and R. Thalmann, Application of a virtual coordinate measuring machine for measurement uncertainty estimation of aspherical lens parameters Measurement Science and Technology 25 094011, 2014.

C. Giusca, R. Leach, and A. Forbes, A virtual machine-based uncertainty evaluation for a traceable areal surface texture measuring instrument Measurement, vol.44, pp.988-993, 2011.

M. Xu, T. Dziomba, and L. Koenders, Modelling and simulating scanning force microscopes for estimating measurement uncertainty : a virtual scanning force microscope Measurement Science and Technology 22 094004, p.31, 2011.

K. Koops, G. Van-veghel-m-g-a,-kotte, and M. Moolman, Calibration strategies for scanning probe metrology, Measurement Science and Technology, vol.18, pp.390-394, 2007.

H. Hansen, P. Bariani, and L. Chiffre, Modelling and measurement uncertainty estimation for integrated AFM-CMM instrument, CIRP Annals-Manufacturing Technology, vol.54, pp.531-534, 2005.

C. Weichert, M. Stavridis, M. Walzel, C. Elster, A. Wiegmann et al., A model based approach to reference-free straightness measurement at the nanometer comparator Modeling Aspects in, p.31, 2009.

P. Kreutzer, N. Dorozhovets, E. Manske, R. Füßl, J. G. Grünwald-r-;-ed-postek et al., Monte carlo simulation to determine the measurement uncertainty of a metrological scanning probe microscope measurement Scanning Microscopy, p.31, 2009.

P. Ceria, S. Ducourtieux, Y. Boukellal, A. Allard, N. Fischer et al., Modelling of the x, y, z positioning errors and uncertainty evaluation for the LNE's mAFM using the monte carlo method, Measurement Science and Technology, vol.28, p.34007, 2017.

P. Ceria, S. Ducourtieux, and Y. Boukellal, Estimation of the measurement uncertainty of LNE's metrological atomic force microscope using virtual instrument modeling and monte carlo method 17th International Congress of Metrology ed Larquier B, p.31, 2015.

, Statistics-vocabulary and symbols-part 1 : General statistical terms and terms used in probability ISO 3534-1:2006 International Organization for Standardization, p.39, 2006.

, Statistics-vocabulary and symbols-part 3 : Design of experiments ISO 3534-3:2012 International Organization for Standardization, p.40, 2012.

N. Metropolis and S. Ulam, The monte carlo method, Journal of the American Statistical Association, vol.44, pp.335-341, 1949.

M. Cox and . Siebert-b-r-l, The use of a monte carlo method for evaluating uncertainty and expanded uncertainty Metrologia, vol.43, pp.178-188, 2006.

M. Cox and H. P. Siebert-b-r-l, Evaluation of measurement uncertainty based on the propagation of distributions using monte carlo simulation Measurement Techniques, vol.46, pp.824-833, 2003.

M. Saito and M. Matsumoto, SIMD-oriented fast mersenne twister : a 128-bit pseudorandom number generator Monte Carlo and Quasi-Monte Carlo Methods, pp.607-622, 2006.

G. Box and M. Muller, A note on the generation of random normal deviates, The Annals of Mathematical Statistics, vol.29, pp.610-611, 1958.

C. Daniel, One-at-a-time plans, Journal of the American Statistical Association, vol.68, pp.353-360, 1973.

A. Saltelli, M. Ratto, A. T. Campolongo, F. Cariboni, J. Gatelli et al., Sensitivity analysis : From theory to practice Global Sensitivity Analysis. The Primer, pp.237-275, 2008.

F. Campolongo, J. Cariboni, and A. Saltelli, An effective screening design for sensitivity analysis of large models Environmental Modelling & Software, vol.22, pp.1509-1518, 2007.

J. Sacks, W. Welch, T. Mitchell, and H. Wynn, Design and analysis of computer experiments Statistical Science, vol.4, pp.409-423, 1989.

R. Cukier, H. Levine, and K. Shuler, Nonlinear sensitivity analysis of multiparameter model systems, Journal of Computational Physics, vol.26, pp.1-42, 1978.

A. Saltelli, Making best use of model evaluations to compute sensitivity indices Computer, Physics Communications, vol.145, pp.280-297, 2002.

T. Homma and A. Saltelli, Importance measures in global sensitivity analysis of nonlinear models, Reliability Engineering & System Safety, vol.52, pp.1-17, 1996.

A. Mood, F. Graybill, and D. Boes, Introduction to the Theory of Statistics, p.70854653, 1974.

M. Jansen, Analysis of variance designs for model output Computer Physics Communications, vol.117, pp.35-43, 1999.

A. Saltelli, P. Annoni, I. Azzini, F. Campolongo, M. Ratto et al., Variance based sensitivity analysis of model output. design and estimator for the total sensitivity index, Computer Physics Communications, vol.181, pp.259-270, 2010.

M. J. Polesel- and S. Gauthier, A virtual dynamic atomic force microscope for image calculations, Journal of Applied Physics, vol.97, p.44902, 2005.

P. , Editions universitaires europeennes) ISBN 6131559546, 2011.

F. Castanié, L. Nony, S. Gauthier, and X. Bouju, Image calculations with a numerical frequency-modulation atomic force microscope, The Journal of Physical Chemistry C, vol.117, pp.10492-10501, 2013.

J. Villarrubia, Tip characterization for dimensional nanometrology Applied Scanning Probe Methods, pp.147-168, 2004.

J. Schneir, Increasing the value of atomic force microscopy process metrology using a high-accuracy scanner, tip characterization, and morphological image analysis, Journal of Vacuum Science & Technology B : Microelectronics and Nanometer Structures, vol.14, p.1540, 1996.

A. Yacoot, L. Koenders, and H. Wolff, An atomic force microscope for the study of the effects of tip-sample interactions on dimensional metrology, Measurement Science and Technology, vol.18, pp.350-359, 2007.

R. Dixson, N. Orji, J. Fu, V. Tsai, E. Williams et al., Silicon single atom steps as AFM height standards Metrology, Inspection, and Process Control for, p.73, 2001.

R. Paul, Robot manipulators : mathematics, programming, and control ; the computer control of robot manipulators 9th ed The MIT Press series in artificial intelligence, pp.9780262160827-026216082, 1992.

T. Eom, K. J. Jeong, and K. , The dynamic compensation of nonlinearity in a homodyne laser interferometer, Measurement Science and Technology, vol.12, pp.1734-1738, 2001.

, Rle system performance Data sheet L-9904-2391-03 B Renishaw apply innovation, 2010.

P. Heydemann, Determination and correction of quadrature fringe measurement errors in interferometers, Applied Optics, vol.20, p.3382, 1981.

W. Hou, Optical parts and the nonlinearity in heterodyne interferometers Precision Engineering, vol.30, pp.337-346, 2006.

M. Thomasset, M. Idir, F. Polack, M. Bray, and J. Servant, A new phase-shift microscope designed for high accuracy stitching interferometry Nuclear Instruments and Methods in, Physics Research Section A : Accelerators, Spectrometers, Detectors and Associated Equipment, vol.710, pp.7-12, 2013.

, SIOS 2015 Triple-beam plane-mirror interferometer Data sheet SP-TR Series SIOS Meßtechnik GmbH

R. Köning, J. Flügge, and H. Bosse, A method for the in situ determination of abbe errors and their correction Measurement Science and Technology, vol.18, pp.476-481, 2007.

R. Penrose and J. Todd, A generalized inverse for matrices Mathematical Proceedings of the Cambridge Philosophical Society 51 406, 1955.

K. Bathe, Numerical methods in finite element analysis (Prentice-Hall) ISBN 0136271901, 1976.

G. Golub and C. Reinsch, Singular value decomposition and least squares solutions Linear Algebra, pp.134-151, 1971.
DOI : 10.1007/978-3-662-39778-7_10

R. Hanson and M. Norris, Analysis of measurements based on the singular value decomposition, SIAM Journal on Scientific and Statistical Computing, vol.2, pp.363-373, 1981.

K. Arun, T. Huang, and S. Blostein, Least-squares fitting of two 3-d point sets IEEE Transactions on Pattern Analysis and Machine Intelligence PAMI-9 698-700, 1987.

Y. Cengel, Heat Transfer : A Practical Approach, p.72458933, 2002.

J. Bosch and J. Robert, Coordinate Measuring Machines and Systems (Manufacturing Engineering and Materials Processing, p.824795814, 1995.

A. Allard and N. Fischer, Sensitivity analysis in metrology : study and comparison on different indices for measurement uncertainty, vol.8, pp.1-6

, LGC 2012 Certificate of analysis ERM-FD304

B. Sankur, Survey over image thresholding techniques and quantitative performance evaluation, Journal of Electronic Imaging, vol.13, p.146, 2004.

J. Hocken, Second Edition (Manufacturing Engineering and Materials Processing, p.9781138076891, 2016.

C. Evans, R. Hocken, and W. Estler, Self-calibration : Reversal, redundancy, error separation, and 'absolute testing, CIRP Annals-Manufacturing Technology, vol.45, pp.617-634, 1996.

R. Hocken and B. Borchardt, On characterizing measuring machine geometry Tech. rep, p.191, 1979.

C. Reeve, A method of calibrating two-dimensional reference plates Tech. rep, 1974.

T. Quinn, Traceability of mass standards among thirty-nine member states of the convention du mètre Metrologia, vol.31, pp.337-337, 1994.

J. Terrien, News from the BIPM Metrologia, vol.4, pp.41-45, 1968.

J. Terrien, News from the BIPM Metrologia, vol.8, pp.32-36, 1972.

P. Giacomo, News from the BIPM Metrologia, vol.16, pp.55-61, 1980.

B. Edlén, The dispersion of standard air, Journal of the Optical Society of America, vol.43, p.339, 1953.

K. Birch and M. Downs, The results of a comparison between calculated and measured values of the refractive index of air, Journal of Physics E : Scientific Instruments, vol.21, pp.694-695, 1988.

W. Wagner and A. Pruß, The IAPWS formulation 1995 for the thermodynamic properties of ordinary water substance for general and scientific use, Journal of Physical and Chemical Reference Data, vol.31, pp.387-535, 2002.

F. Jones, Simplified equation for calculating the refractivity of air, Applied Optics, vol.19, p.4129, 1980.

K. Birch, Precise determination of refractometric parameters for atmospheric gases, Hygrométrie relative, vol.8, p.110, 1991.

. Incertitude, , vol.30, p.164

, Incertitude élargie, vol.49, p.189

. Incertitude-type, , vol.39, p.189

, Incertitude-type composée, p.44

, Indice de sensibilité, p.59

, Indice de sensibilité, p.168

, Inter-comparaison, vol.12, p.181

, Interaction, p.59

. Interféromètre, , vol.19, p.122

. Justesse, , vol.36, p.189