. Références,

J. Alexandersen, Topology Optimisation for Coupled Convection Problems, 2013.

J. Alexandersen, N. Aage, C. Schousboe-andreasen, and O. Sigmund, Topology optimisation for natural convection problems, International Journal for Numerical Methods in Fluids, vol.76, issue.10, pp.699-721, 2014.

J. Alexandersen, O. Sigmund, and N. Aage, Topology optimisation of passive coolers for light-emitting diode lamps, 11thWorld Congress on Structural and Multidisciplinary Optimization, pp.3-7, 2015.

J. Alexandersen, O. Sigmund, and N. Aage, Large scale three-dimensional topology optimisation of heat sinks cooled by natural convection, International Journal of Heat and Mass Transfer, vol.100, pp.876-891, 2016.

C. Schousboe-andreasen and O. Sigmund, Saturated poroelastic actuators generated by topology optimization. Structural and Multidisciplinary Optimization, vol.43, pp.693-706, 2011.

C. Schousboe-andreasen, A. R. Gersborg, and O. Sigmund, Topology optimization of microfluidic mixers, International Journal for Numerical Methods in Fluids, vol.61, issue.5, pp.498-513, 2009.

A. Andreozzi, B. Buonomo, and O. Manca, Numerical Investigation on Transient Natural Convection in Vertical Channels With Heated and Cooled Walls, ASME/JSME 2007 Thermal Engineering Heat Transfer Summer Conference collocated with the ASME 2007 InterPACK Conference, pp.545-554, 2007.

P. Angot, C. Bruneau, and P. Fabrie, A penalization method to take into account obstacles in incompressible viscous flows, Numerische Mathematik, vol.81, issue.4, pp.497-520, 1999.
DOI : 10.1007/s002110050401

T. Ward-athan and P. Y. Papalambros, A Note on Weighted Criteria Methods for Compromise Solutions in Multi-Objective Optimization, 1996.

A. Auletta, O. Manca, M. Musto, and S. Nardini, Thermal design of symmetrically and asymmetrically heated channel-chimney systems in natural convection, Applied Thermal Engineering, vol.23, issue.5, pp.605-621, 2003.

E. Bacharoudis, G. Michalis, M. K. Vrachopoulos, D. Koukou, A. E. Margaris et al., Study of the natural convection phenomena inside a wall solar chimney with one wall adiabatic and one wall under a heat flux, Applied Thermal Engineering, vol.27, issue.13, pp.2266-2275, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00498946

B. F. Balunov, A. S. Babykin, R. A. Rybin, V. A. Krylov, V. N. Tanchuk et al., Heat transfer at mixed convection in vertical and inclined flat channels of the vacuum chamber of the ITER international thermonuclear reactor. High Temperature, vol.42, pp.126-133, 2004.

G. Barozzi, M. Corticelli, and E. Nobile, Numerical simulation of time-dependent buoyant flows in an enclosed vertical channel. Heat and mass transfer, vol.35, pp.89-99, 1999.

R. Becker, R. Kapp, and . Rannacher, Adaptive finite element methods for optimal control of partial differential equations : Basic concept, Siam Journal on Control and Optimization, vol.39, issue.1, pp.113-132, 2000.
DOI : 10.1137/s0363012999351097

/. S0363012999351097 and . Url,

P. Martin, O. Bendsøe, and . Sigmund, Topology optimization : theory, methods, and applications, books?hl=en{&}lr={&}id=NGmtmMhVe2sC{&}oi=fnd{&}pg=PA1{&}dq= Topology+optimization:+theory,+methods, 2003.

M. Philip-bendsøe, N. Kikuchi, M. P. Bendsoe, N. Kikuchi, M. P. Bendsøe et al., Generating optimal topologies in structural design using a homogenization method, Computer Methods in Applied Mechanics and Engineering, vol.71, issue.2, pp.197-224, 1988.

M. Bergmann, Optimisation aérodynamique par réduction de modèle POD et contrôle optimal : application au sillage laminaire d'un cylindre circulaire, 2004.
DOI : 10.1051/meca:2007028
URL : https://hal.inria.fr/inria-00338832/file/MI2007.pdf

J. Bodoia and J. Osterle, The Development of Free Convection Between Heated Vertical Plates, Journal of Heat Transfer, vol.84, issue.1, pp.40-43, 1962.

D. Bonchev, H. Armenag, E. Dekmezian, A. Markel, and . Faldi, Topology-rheology regression models for monodisperse linear and branched polyethylenes, Journal of applied polymer science, vol.90, issue.10, pp.2648-2656, 2003.
DOI : 10.1002/app.12906

S. Bories, A. Mojtabi, M. Prat, and M. Quintard, Transferts de chaleur dans les milieux poreux, 1996.

S. Bories, M. Prat, and M. Quintard, Transferts de chaleur dans les milieux poreux-Conduction, convection, rayonnement, vol.33, pp.1-22, 2012.

T. Borrvall and J. Petersson, Topology optimization of fluids in Stokes flow, International Journal for Numerical Methods in Fluids, vol.41, issue.1, pp.77-107, 2003.

B. Brangeon, P. Joubert, and A. Bastide, Influence of the dynamic boundary conditions on natural convection in an asymmetrically heated channel, International Journal of Thermal Sciences, vol.95, pp.64-72, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01152398

T. E. Bruns, A reevaluation of the SIMP method with filtering and an alternative formulation for solid-void topology optimization. Structural and Multidisciplinary Optimization, vol.30, pp.428-436, 2005.

T. E. Bruns, Topology optimization of convection-dominated, steady-state heat transfer problems, International Journal of Heat and Mass Transfer, vol.50, pp.2859-2873, 2007.
DOI : 10.1016/j.ijheatmasstransfer.2007.01.039

S. A. Burek and . Habeb, Air flow and thermal efficiency characteristics in solar chimneys and Trombe Walls, Energy and Buildings, vol.39, issue.2, pp.128-135, 2007.
DOI : 10.1016/j.enbuild.2006.04.015

J. P. Caltagirone, Simulation d'une expérience de thermo-convection, 2006.

A. Campo, B. Manca, and . Morrone, Inflow and Outflow Effects on Natural Convection in Partially Heated Vertical Parallel Plane Channels, ASME-IMECE, pp.325-335, 1997.

J. Carpenter, D. Briggs, and V. Sernas, Combined Radiation and Developing Laminar Free Convection Between Vertical Flat Plates With Asymmetric Heating, Journal of Heat Transfer, vol.98, issue.1, pp.95-100, 1976.
DOI : 10.1115/1.3450476

T. S. Chang and T. F. Lin, On the reversed flow and oscillating wake in an asymmetrically heated channel, International Journal for Numerical Methods in Fluids, vol.10, issue.4, pp.443-459, 1990.
DOI : 10.1002/fld.1650100407

E. Chénier, R. Eymard, and R. Herbin, A collocated finite volume scheme to solve free convection for general non-conforming grids, 2009.

J. Cipriano, G. Houzeaux, D. Chemisana, C. Lodi, and J. Martí-herrero, Numerical analysis of the most appropriate heat transfer correlations for free ventilated double skin photovoltaic façades, Applied Thermal Engineering, vol.57, issue.1-2, pp.57-68, 2013.

P. Coffin and K. Maute, Level set topology optimization of cooling and heating devices using a simplified convection model. Structural and Multidisciplinary Optimization, vol.53, pp.985-1003, 2016.
DOI : 10.1007/s00158-015-1343-8

C. Daverat, Étude expérimentale de la convection naturelle en canal verticale à flux de chaleur imposé, 2012.

C. Daverat, C. Pabiou, H. Ménézo, S. Bouia, and . Xin, Experimental investigation of turbulent natural convection in a vertical water channel with symmetric heating : Flow and heat transfer. Experimental Thermal and Fluid Science, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00868541

T. Dbouk, A review about the engineering design of optimal heat transfer systems using topology optimization, Applied Thermal Engineering, vol.112, pp.841-854, 2016.

E. Dede, Multiphysics topology optimization of heat transfer and fluid flow systems. proceedings of the COMSOL Users Conference, 2009.

Y. Deng, Z. Liu, P. Zhang, Y. Liu, and Y. Wu, Topology optimization of unsteady incompressible Navier-Stokes flows, Journal of Computational Physics, vol.230, issue.17, pp.6688-6708, 2011.
DOI : 10.1016/j.jcp.2011.05.004

G. Desrayaud, E. Chénier, A. Joulin, A. Bastide, B. Brangeon et al., Benchmark solutions for natural convection flows in vertical channels submitted to different open boundary conditions, International Journal of Thermal Sciences, vol.72, pp.18-33, 2009.
DOI : 10.1016/j.ijthermalsci.2013.05.003
URL : https://hal.archives-ouvertes.fr/hal-00841302

J. S. Maria-b-dühring, O. Jensen, and . Sigmund, Acoustic design by topology optimization, Journal of sound and vibration, vol.317, issue.3, pp.557-575, 2008.

F. Dupont, F. Ternat, S. Samot, and R. Blonbou, Twodimension experimental study of the reverse flow in a free convection channel with active walls differentially heated, Experimental Thermal and Fluid Science, vol.47, pp.150-157, 2013.

W. Elenbaas, Heat dissipation of parallel plates by free convection, Physica, vol.9, issue.1, pp.1-28, 1942.
DOI : 10.1016/s0031-8914(42)90053-3

A. Hans, N. Eschenauer, and . Olhoff, Topology Optimization of Continuum Structures : A review*, Applied Mechanics Reviews, vol.54, issue.4, pp.331-390, 2001.

G. Henry-weller, A tensorial approach to computational continuum mechanics using object-oriented techniques, Computers in physics, vol.12, pp.620-631, 1998.

H. Everett and I. , Generalized Lagrange multiplier method for solving problems of optimum allocation of resources, Operations research, vol.11, issue.3, pp.399-417, 1963.

R. Eymard, J. Herbin, and . Latche, Convergence Analysis of a Colocated Finite Volume Scheme for the Incompressible Navier-Stokes Equations on General 2D or 3D Meshes, SIAM Journal on Numerical Analysis, vol.45, issue.1, pp.1-36, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00004841

R. Eymard and R. Herbin, A new colocated finite volume scheme for the incompressible Navier-Stokes equations on general non matching grids, Comptes Rendus Mathematique, vol.344, issue.10, pp.659-662, 2007.

. Wu-shung, S. Fu, C. Hao-huang, and . Li, An investigation of unsteady flow reversal of natural convection in vertical parallel plates by the modified local one-dimensional inviscid relations method, International Journal of Heat and Mass Transfer, vol.86, pp.124-138, 2015.

G. Gan, A parametric study of Trombe walls for passive cooling of buildings, Energy and Buildings, vol.27, issue.1, pp.24-32, 1998.

G. Gan, Simulation of buoyancy-driven natural ventilation of buildings-Impact of computational domain, Energy and Buildings, vol.42, issue.8, pp.1290-1300, 2010.

C. Garnier, Modélisation numérique des écoulements ouverts de convection naturelle au sein d'un canal vertical asymétriquement chauffé, 2014.

A. Gersborg-hansen, M. P. Bendsøe, and O. Sigmund, Topology optimization of heat conduction problems using the finite volume method. Structural and Multidisciplinary Optimization, vol.31, pp.251-259, 2006.

S. Giroux-julien, C. Ménézo, J. Vareilles, H. Pabiou, M. Fossa et al., Natural convection in a nonuniformly heated channel with application to photovoltaic facades, Computational Thermal Sciences, vol.1, issue.3, pp.231-258, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00395916

J. Guest and L. Genut, Reducing dimensionality in topology optimization using adaptive design variable fields, International Journal for Numerical Methods in Engineering, vol.81, issue.8, pp.1019-1045, 2010.

J. K. Guest and J. H. Prévost, Topology optimization of creeping fluid flows using a Darcy-Stokes finite element, International Journal for Numerical Methods in Engineering, vol.66, issue.3, pp.461-484, 2006.

D. Max and . Gunzburger, Perspectives in flow control and optimization. SIAM, vol.089871527, 2002.

B. Hassani and E. Hinton, A review of homogenization and topology opimization II-analytical and numerical solution of homogenization equations, Computers & Structures, vol.69, issue.6, pp.132-133, 1998.

B. Hassani and E. Hinton, A review of homogenization and topology optimization I-homogenization theory for media with periodic structure, Computers & Structures, vol.69, issue.6, pp.707-717, 1998.

B. Hassani and E. Hinton, Review of homogenization and topology optimization III-topology optimization using optimality criteria, Computers and Structures, vol.69, issue.6, pp.133-136, 1998.

C. Hemmer, C. V. Popa, A. Sergent, and G. Polidori, Heat and fluid flow in an uneven heated chimney, International Journal of Thermal Sciences, vol.107, pp.220-229, 2016.

R. Herzog and K. Kunisch, Algorithms for PDE-constrained optimization, GAMM-Mitteilungen, vol.33, issue.2, pp.163-176, 2010.

M. R. Hestenes and E. Stiefel, Methods of conjugate gradients for solving linear systems, 1952.

M. Hinze, R. Pinnau, M. Ulbrich, and S. Ulbrich, Optimization with PDE constraints, vol.23, 2008.

C. Im, H. Jung, and Y. Kim, Hybrid genetic algorithm for electromagnetic topology optimization, IEEE Transactions on Magnetics, vol.39, issue.5, pp.2163-2169, 2003.

F. P. Incropera, Convection Heat Transfer in Electronic Equipment Cooling, Journal of Heat Transfer, vol.110, issue.4b, p.1097, 1988.

P. Frank, D. P. Incropera, and . Dewitt, Introduction To Heat Transfer, Igarss, issue.1, pp.1-5, 2014.

J. Jackson, M. Cotton, and B. Axcell, Studies of mixed convection in vertical tubes, International journal of heat and fluid flow, vol.10, issue.1, pp.2-15, 1989.

Y. Jannot, Transferts thermiques, p.161, 2012.
URL : https://hal.archives-ouvertes.fr/hal-01534098

U. Kangro and R. Nicolaides, Divergence boundary conditions for vector Helmholtz equations with divergence constraints. Mathematical Modelling and Numerical, Analysis, vol.33, issue.3, pp.479-492, 1999.

M. Kaviany, Mechanical engineering series Principles of heat transfer in porous media second edition, 1995.

M. Kaviany, Fluid Mechanics, Principles of Heat Transfer in Porous Media, pp.15-113, 1991.

K. Khadra, . Angot, J. Parneix, and . Caltagirone, Fictitious domain approach for numerical modelling of Navier-Stokes equations, Int. JOURNAL FOR NUMERICAL METHODS IN FLUIDS, vol.34, pp.651-684, 1998.

R. Khanal and C. Lei, Solar chimney-A passive strategy for natural ventilation, 2011.

K. Kihm, J. Kim, and L. Fletcher, Onset of flow reversal and penetration length of natural convective flow between isothermal vertical walls, TRANSACTIONSAMERICAN SOCIETY OF MECHANICAL ENGINEERS JOURNAL OF HEAT TRANSFER, vol.117, pp.22-1481, 1995.

D. Kim, J. K. Sykulski, and D. Lowther, The implications of the use of composite materials in electromagnetic device topology and shape optimization, IEEE Transactions on Magnetics, vol.45, issue.3, pp.1154-1157, 2009.

A. Adriano, E. Koga, C. Comini, . Lopes, F. Helcio et al., Development of heat sink device by using topology optimization, International Journal of Heat and Mass Transfer, vol.64, pp.759-772, 2013.

E. Kontoleontos, E. M. Papoutsis-kiachagias, .. S. Zymaris, D. I. Papadimitriou, and K. C. Giannakoglou, Adjoint-based constrained topology optimization for viscous flows, including heat transfer. Engineering Optimization, pp.1-21, 2012.

S. Kreissl and K. Maute, Levelset based fluid topology optimization using the extended finite element method. Structural and Multidisciplinary Optimization, vol.46, pp.311-326, 2012.

S. Kreissl, G. Pingen, A. Evgrafov, and K. Maute, Topology optimization of flexible micro-fluidic devices. Structural and Multidisciplinary Optimization, vol.42, pp.495-516, 2010.

S. Kreissl, G. Pingen, and K. Maute, Topology optimization for unsteady flow, International Journal for Numerical Methods in Engineering, vol.87, issue.13, pp.1229-1253, 2011.

A. Krishnan, C. Premachandran, S. Balaji, and . Venkateshan, Combined experimental and numerical approaches to multi-mode heat transfer between vertical parallel plates, Experimental Thermal and Fluid Science, vol.29, issue.1, pp.894-1777, 2004.

M. Lawry and K. Maute, Level set topology optimization of problems with sliding contact interfaces. Structural and Multidisciplinary Optimization, vol.52, pp.1107-1119, 2015.

B. S. Lazarov and O. Sigmund, Filters in topology optimization based on Helmholtztype differential equations, International Journal for Numerical Methods in Engineering, vol.86, issue.6, pp.765-781, 2011.

K. Lee, Topology Optimization of Convective Cooling System Designs, 2012.

R. Li, M. Bousetta, E. Chénier, and G. Lauriat, Effect of surface radiation on natural convective flows and onset of flow reversal in asymmetrically heated vertical channels, International journal of thermal sciences, pp.9-27, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00764760

. Oing-quan-liang, Performance-based optimization : A review, Advances in Structural Engineering, vol.10, issue.6, pp.739-753, 2007.

J. Liu and W. Tao, Numerische Ermittlung der natürlichen Konvektion um einen vertikalen Kanal in einer rechteckigen Kammer, 1996.

I. Macdonald, M. El-sayed, . Mow, and . Dullien, Flow through Porous Mediathe Ergun Equation Revisited, Industrial Engineering Chemistry Fundamentals, vol.18, issue.3, pp.199-208, 1979.

O. Manca and V. Naso, Experimental analysis of natural convection and thermal radiation in vertical channels, ASME HTD, vol.145, p.132, 1990.

O. Manca, M. Musto, and V. Naso, Experimental analysis of asymmetrical isoflux channel-chimney systems, International journal of thermal sciences, vol.42, issue.9, pp.837-846, 2003.

G. Marck and Y. Privat, On some shape and topology optimization problems in conductive and convective heat transfers, OPTI 2014-An international conference on engineering and applied sciences optimization, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01054711

G. Marck, M. Nemer, and J. Harion, Topology optimization of heat and mass transfer problems : laminar flow, Numerical Heat Transfer, vol.63, issue.6, pp.508-539, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00880111

G. Marck, Optimisation Topologique des Transferts de Chaleur et de Masse-Application aux {É}changeurs de Chaleur, 2012.

R. , C. Martinelli, and L. Boelter, The Analytical Prediction of Superposed Free and Forced Viscous Convection in a Vertical Pipe, by RC Martinelli and LMK Boelter, 1942.

T. Matsumori, T. Kondoh, A. Kawamoto, and T. Nomura, Topology optimization for fluid-thermal interaction problems under constant input power. Structural and Multidisciplinary Optimization, vol.47, pp.571-581, 2013.

A. Messac, C. Puemi-sukam, and E. Melachrinoudis, Aggregate objective functions and pareto frontiers : Required relationships and practical implications, Optimization and Engineering, vol.1, issue.2, pp.171-188, 2000.

D. Naylor, J. M-floryan, and . Tarasuk, A numerical study of developing free convection between isothermal vertical plates, Journal of Heat Transfer, vol.113, issue.3, pp.22-1481, 1991.

A. Donald, A. Nield, and . Bejan, Convection in porous media, 2013.

J. , P. Nougier, and J. Nougier, Méthodes de calcul numérique, vol.3, 1985.

T. Van-oevelen and M. Baelmans, Application of Topology Optimization in a Conjugate, OPT-i 2014-1st International Conference on Engineering and Applied Sciences Optimization, pp.532-577, 2014.

F. Okkels and H. Bruus, Scaling behavior of optimally structured catalytic microfluidic reactors, Physical Review E-Statistical, Nonlinear, and Soft Matter Physics, vol.75, issue.1, 2007.

F. Laurits-højgaard-olesen, H. Okkels, and . Bruus, A high-level programming-language implementation of topology optimization applied to steady-state Navier-Stokes flow, International Journal for Numerical Methods in Engineering, vol.65, issue.7, pp.975-1001, 2006.

D. Ospir, C. Popa, C. Chereches, G. Polidori, and S. Fohanno, Flow visualization of natural convection in a vertical channel with asymmetric heating. International Communications in Heat and Mass Transfer, 2012.

C. Othmer, A continuous adjoint formulation for the computation of topological and surface sensitivities of ducted flows, International Journal for Numerical Methods in Fluids, vol.58, issue.8, pp.861-877, 2008.

C. Othmer, Adjoint methods for car aerodynamics, Journal of Mathematics in Industry, vol.4, issue.1, 2014.

C. Othmer, T. Kaminski, and R. Giering, Computation of Topological Sensitivities in Fluid Dynamics : Cost Function Versatility, Eccomas Cfd, pp.1-12, 2006.

E. and K. Giannakoglou, Continuous Adjoint Methods for Turbulent Flows, Applied to Shape and Topology Optimization : Industrial Applications, Archives of Computational Methods in Engineering, vol.23, issue.2, pp.255-299, 2016.

V. Suhas, D. Patankar, and . Spalding, A calculation procedure for heat, mass and momentum transfer in three-dimensional parabolic flows, International journal of heat and mass transfer, vol.15, issue.10, pp.1787-1806, 1972.

N. Petra and G. Stadler, Model variational inverse problems governed by partial differential equations, 2011.

G. Polidori, S. Fatnassi, R. Ben-maad, S. Fohanno, and F. Beaumont, Early-stage dynamics in the onset of free-convective reversal flow in an open-ended channel asymmetrically heated, International Journal of Thermal Sciences, vol.88, pp.40-46, 2014.

X. Qian and . Ercan-m-dede, Topology optimization of a coupled thermalfluid system under a tangential thermal gradient constraint. Structural and Multidisciplinary Optimization, vol.54, pp.531-551, 2016.

D. Ramalingom, P. Cocquet, and A. Bastide, A new interpolation technique to deal with fluid-porous media interfaces for topology optimization of heat transfer, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01618684

D. Ramalingom, P. Cocquet, and A. Bastide, Impact of external surroundings on natural convection in a vertical channel asymmetrically heated, European Congress on Computational Methods in Applied Sciences and Engineering
URL : https://hal.archives-ouvertes.fr/hal-01337329

D. Ramalingom, P. Cocquet, and A. Bastide, Numerical study of natural convection in asymmetrically heated channel considering thermal stratification and surface radiation, Numerical Heat Transfer, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01610724

G. I. Rozvany, M. Zhou, and T. Birker, Generalized shape optimization without homogenization, Structural Optimization, vol.4, issue.3-4, pp.250-252, 1992.

E. Sanchez-palencia, Non-Homogeneous Media And Vibration Theory, vol.127, 1980.

J. Shen, S. Lassue, L. Zalewski, and D. Huang, Numerical study on thermal behavior of classical or composite Trombe solar walls, Energy and Buildings, vol.39, issue.8, pp.962-974, 2007.

O. Sigmund and K. Maute, Topology optimization approaches : A comparative review, 2013.

E. Sparrow, G. Chrysler, and L. Azevedo, Observed flow reversals and measured-predicted Nusselt numbers for natural convection in a one-sided heated vertical channel, Journal of Heat Transfer, vol.106, issue.2, pp.22-1481, 1984.

M. Stolpe and K. Svanberg, An alternative interpolation scheme for minimum compliance topology optimization. Structural and Multidisciplinary Optimization, 2001.

C. Suárez, P. Joubert, J. L. Molina, and F. J. Sánchez, Heat transfer and mass flow correlations for ventilated facades, Energy and Buildings, vol.43, issue.12, pp.3696-3703, 2011.

K. Svanberg, The method of moving asymptotes-a new method for structural optimization, International Journal for Numerical Methods in Engineering, vol.24, issue.2, pp.359-373, 1987.

K. Svanberg, A class of globally convergent optimization methods based on conservative convex separable approximations, SIAM Journal on Optimization, vol.12, issue.2, pp.555-573, 2002.

A. Tallet, Contrôle des écoulements par modèles d'ordre réduit, en vue de l'application à la ventilation naturelle des bâtiments, 2013.

N. P. Van-dijk, K. Maute, M. Langelaar, and F. Van-keulen, Level-set methods for structural topology optimization : A review, 2013.

V. C. Jose, A. Vargas, and . Bejan, Thermodynamic optimization of finned crossflow heat exchangers for aircraft environmental control systems, International Journal of Heat and Fluid Flow, vol.22, issue.6, pp.657-665, 2001.

E. Vitale, Analyse et contrôle des écoulements instationnaires décollés, 2005.

E. Wadbro and M. Berggren, Topology optimization of an acoustic horn, Computer methods in applied mechanics and engineering, vol.196, issue.1, pp.420-436, 2006.

Y. Michael, X. Wang, D. Wang, and . Guo, A level set method for structural topology optimization, Computer Methods in Applied Mechanics and Engineering, vol.192, issue.1-2, pp.559-564, 2003.

B. Webb and D. Hill, High Rayleigh Number Laminar Natural Convection in an Asymmetrically Heated Vertical Channel, Journal of Heat Transfer, vol.111, issue.3, pp.649-656, 1989.

G. Henry-g-weller, H. Tabor, C. Jasak, and . Fureby, A tensorial approach to computational continuum mechanics using object-oriented techniques, Computers in physics, vol.12, issue.6, pp.894-1866, 1998.

, , p.862, 2010.

Y. M. Xie and G. P. Steven, A simple evolutionary procedure for structural optimization, Computers and Structures, vol.49, issue.5, pp.885-896, 1993.

Y. Xie and G. Steven, Evolutionary Structural Optimization, 1997.

K. Yaji, T. Yamada, S. Kubo, K. Izui, and S. Nishiwaki, A topology optimization method for a coupled thermal-fluid problem using level set boundary expressions, International Journal of Heat and Mass Transfer, vol.81, pp.878-888, 2015.

R. , B. Yedder, and E. Bilgen, Natural convection and conduction in Trombe wall systems, International Journal of Heat and Mass Transfer, vol.34, issue.4-5, pp.1237-1248, 1991.

H. Gil and . Yoon, Topological design of heat dissipating structure with forced convective heat transfer, Journal of Mechanical Science and Technology, vol.24, issue.6, pp.1225-1233, 2010.

G. Ho-yoon, Topological layout design of electro-fluid-thermal-compliant actuator, Computer Methods in Applied Mechanics and Engineering, pp.28-44, 2012.

G. Ho-yoon and Y. Kim, The element connectivity parameterization formulation for the topology design optimization of multiphysics systems, International Journal for Numerical Methods in Engineering, vol.64, issue.12, pp.1649-1677, 2005.

G. Ho-yoon, J. S. Jensen, and O. Sigmund, Topology optimization of acoustic-structure interaction problems using a mixed finite element formulation, International journal for numerical methods in engineering, vol.70, issue.9, pp.1049-1075, 2007.

M. Zhou and G. I-n-rozvany, The COC algorithm, Part II : Topological, geometrical and generalized shape optimization, Computer Methods in Applied Mechanics and Engineering, vol.89, issue.1-3, pp.90046-90055, 1991.

M. Zhou, J. Alexandersen, O. Sigmund, C. Pedersen, and C. Clauspedersen, Industrial application of topology optimization for combined conductive and convective heat transfer problems. Structural and Multidisciplinary Optimization, vol.54, pp.1045-1060, 2016.

S. Zhou, W. Li, and Q. Li, Level-set based topology optimization for electromagnetic dipole antenna design, Journal of Computational Physics, vol.229, issue.19, pp.6915-6930, 2010.

A. Zoubir, Etude des transferts thermo-convectifs dans un canal semi-ouvert : Application aux façades type double-peau. PhD thesis, L'institut national des sciences appliquées de Lyon, 2014.