P. Fauchais, Understanding plasma spraying, Journal of Physics D: Applied Physics, vol.37, issue.9, p.86, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00944489

, Advantages of Various Thermal Spray Processes

A. Vardelle, C. Moreau, N. J. Themelis, and C. Chazelas, A perspective on plasma spray technology, Plasma Chemistry and Plasma Processing, vol.35, pp.491-509, 2015.

R. C. Tucker and A. Handbook, Thermal Spray Technology, vol.5, 2013.

P. L. Fauchais, J. V. Heberlein, and M. I. Boulos, Thermal spray fundamentals: from powder to part, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00946557

O. Metco, Atmospheric Plasma Spray Solutions V6, 2017.

J. R. Davis, Handbook of thermal spray technology, vol.2004

E. Muehlberger, Method and apparatus for effecting high-energy dynamic coating of substrates, Google Patents, 1974.

V. Wilms, LPPS depositited coatings for the protection against hot gas corrosion-a first evaluation, Proceedings of the 9th International Thermal Spray Conference, pp.317-324, 1980.

M. Braguier and R. Tueta, Supersonic and vacuum arc plasma spraying apparatus characteristics and application to metallic coatings, Proceedings of the 9th International Thermal Spray Conference, pp.67-72, 1980.

L. Pawlowski, The science and engineering of thermal spray coatings

E. Muehlberger and P. Meyer, LPPS-Thin Film Processes: Overview of Origin and Future Possibilities, Proceedings of International Thermal Spray Conference, pp.737-740, 2009.

E. Muehlberger, Method of forming uniform thin coatings on large substrates, Google Patents, 1998.

M. F. Smith, A. C. Hall, J. D. Fleetwood, and P. Meyer, Very Low Pressure Plasma Spray-A Review of an Emerging Technology in the Thermal Spray Community, Coatings, vol.1, issue.2, pp.117-132, 2011.

A. Vardelle, C. Moreau, J. Akedo, H. Ashrafizadeh, C. C. Berndt et al., The 2016 Thermal Spray Roadmap, vol.25, pp.1376-1440, 2016.
DOI : 10.1007/s11666-016-0473-x
URL : https://link.springer.com/content/pdf/10.1007%2Fs11666-016-0473-x.pdf

M. I. Boulos, P. Fauchais, and E. Pfender, Thermal plasmas: fundamentals and applications

K. Von-niessen and M. Gindrat, Plasma Spray-PVD: A New Thermal Spray Process to Deposit Out of the Vapor Phase, Journal of Thermal Spray Technology, vol.20, issue.4, pp.736-743, 2011.

M. Gindrat, J. Dorier, C. Hollenstein, M. Loch, A. Refke et al., Effect of specific operating conditions on the properties of LPPS plasma jets expanding at low pressure, 2001.

A. Refke, G. Barbezat, J. Dorier, M. Gindrat, and C. Hollenstein, Characterization of LPPS processes under various spray conditions for potential applications, 2003.

W. Mayr and R. Henne, Investigation of a VPS-Burner with Laval Nozzle using an Automated Laser Doppler Measuring System, 1st Plasma Technik symposium, pp.87-97, 1988.

M. Cao, F. Gitzhofer, D. Gravelle, R. Henne, and M. Boulos, A torch nozzle design to improve plasma spraying techniques, vol.6, p.39, 1997.
DOI : 10.1088/0963-0252/6/1/006

R. Henne, W. Mayr, and A. Reusch, Influence of nozzle geometry on particle behaviour and coating quality in high-velocity VPS, Thermal Spraying Conference(Thermische Spritzkonferenz), vol.93, pp.7-11, 1993.

G. Schiller, R. H. Henne, M. Lang, R. Ruckdäschel, and S. Schaper, Development of vacuum plasma sprayed thin-film SOFC for reduced operating temperature, Fuel Cells Bulletin, vol.3, issue.21, pp.7-12, 2000.
DOI : 10.1016/s1464-2859(00)88860-4

G. Mauer, A. Hospach, N. Zotov, and R. Vassen, Process Conditions and Microstructures of Ceramic Coatings by Gas Phase Deposition Based on Plasma Spraying, vol.22, pp.83-89, 2013.
DOI : 10.1007/s11666-012-9838-y

T. Skiba, P. Hau?ild, M. Karlík, K. Vanmeensel, and J. Vleugels, Mechanical properties of spark plasma sintered FeAl intermetallics, Intermetallics, vol.18, issue.7, pp.1410-1414, 2010.
DOI : 10.1016/j.intermet.2010.02.009

Z. Salhi, D. Klein, P. Gougeon, and C. Coddet, Development of coating by thermal plasma spraying under very low-pressure condition < 1 mbar, Vacuum, vol.77, issue.2, pp.145-150, 2005.
DOI : 10.1016/j.vacuum.2004.08.013

D. Sokolov, Contribution au développement de la projection thermique à très faible pression, 2009.

B. Vautherin, M. P. Planche, A. Quet, L. Bianchi, and G. Montavon, Manufacturing of composite titanium-titanium nitride coatings by reactive very low pressure plasma spraying (R-VLPPS), Journal of Physics: Conference Series, vol.550, issue.1, pp.12035-12044, 2014.
DOI : 10.1088/1742-6596/550/1/012035
URL : http://iopscience.iop.org/article/10.1088/1742-6596/550/1/012035/pdf

P. He, Etude du développement de la projection plasma sous très basse pression, 2014.

J. Mao, Z. Deng, M. Liu, C. Deng, J. Song et al., Regional characteristics of YSZ coating prepared by expanded Ar/He/H plasma jet at very low pressure, Surface and Coatings Technology, vol.328, pp.240-247, 2017.
DOI : 10.1016/j.surfcoat.2017.08.065

A. Refke, M. Gindrat, and S. M. Ag, Process Characterization of LPPS Thin Film Processes with Optical Diagnostics, 2007.

N. Zhang, F. Sun, L. Zhu, M. P. Planche, H. Liao et al., Electron Temperature and Density of the Plasma Measured by Optical Emission Spectroscopy in VLPPS Conditions, Journal of Thermal Spray Technology, vol.20, issue.6, pp.1321-1327, 2011.

K. Von-niessen and M. Gindrat, Plasma Spray-PVD: A New Thermal Spray Process to Deposit Out of the Vapor Phase, Journal of Thermal Spray Technology, vol.20, issue.4, pp.736-743, 2011.

, NIST Atomic Spectra Database Lines Form

, ASM handbook, vol.10, 2008.

D. R. Askeland and W. J. Wright, Science and engineering of materials, 2015.

A. K. Zak, W. A. Majid, M. E. Abrishami, and R. Yousefi, X-ray analysis of ZnO nanoparticles by Williamson-Hall and size-strain plot methods, Solid State Sciences, vol.13, issue.1, pp.251-256, 2011.

G. Williamson and W. Hall, X-ray line broadening from filed aluminium and wolfram, Acta metallurgica, vol.1, issue.1, pp.22-31, 1953.
DOI : 10.1016/0001-6160(53)90006-6

V. Mote, Y. Purushotham, and B. Dole, Williamson-Hall analysis in estimation of lattice strain in nanometer-sized ZnO particles, Journal of Theoretical and Applied Physics, vol.6, issue.1, p.6, 2012.

F. H. Chung, Quantitative interpretation of X-ray diffraction patterns of mixtures. II, Journal of Applied Crystallography, vol.7, issue.6, pp.526-531, 1974.

W. C. Oliver and G. M. Pharr, Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology, Journal of materials research, vol.19, issue.1, pp.3-20, 2004.

B. Nait-ali, K. Haberko, H. Vesteghem, J. Absi, and D. Smith, Thermal conductivity of highly porous zirconia, Journal of the European Ceramic society, vol.26, issue.16, pp.3567-3574, 2006.

X. Q. Cao, R. Vassen, and D. Stoever, Ceramic materials for thermal barrier coatings, Journal of the European Ceramic Society, vol.24, issue.1, pp.1-10, 2004.
DOI : 10.1016/s0955-2219(03)00129-8

A. Selçuk and A. Atkinson, Strength and toughness of tape-cast yttria-stabilized zirconia, Journal of the American Ceramic Society, vol.83, issue.8, pp.2029-2035, 2000.

M. Sillassen, P. Eklund, N. Pryds, E. Johnson, U. Helmersson et al., Lowtemperature superionic conductivity in strained yttria-stabilized zirconia, Advanced Functional Materials, vol.20, issue.13, pp.2071-2076, 2010.
DOI : 10.1002/adfm.201000071
URL : http://liu.diva-portal.org/smash/get/diva2:343391/FULLTEXT01

Y. Gu, K. Khor, D. Pan, and P. Cheang, Activity of plasma sprayed yttria stabilized zirconia reinforced hydroxyapatite/Ti-6Al-4V composite coatings in simulated body fluid, Biomaterials, vol.25, issue.16, pp.3177-3185, 2004.

R. Vassen, X. Cao, F. Tietz, D. Basu, and D. Stöver, Zirconates as new materials for thermal barrier coatings, Journal of the American Ceramic Society, vol.83, issue.8, pp.2023-2028, 2000.
DOI : 10.1111/j.1151-2916.2000.tb01506.x

D. R. Clarke and S. R. Phillpot, Thermal barrier coating materials, vol.8, pp.22-29, 2005.
DOI : 10.1016/s1369-7021(05)70934-2
URL : https://doi.org/10.1016/s1369-7021(05)70934-2

D. Zambrano, A. Barrios, L. Tobón, C. Serna, P. Gómez et al., Thermal properties and phase stability of Yttria-Stabilized Zirconia (YSZ) coating deposited by Air Plasma Spray onto a Ni-base superalloy, Ceramics International, vol.44, issue.4, pp.3625-3635, 2018.

J. W. Fergus, Electrolytes for solid oxide fuel cells, Journal of Power Sources, vol.162, issue.1, pp.30-40, 2006.

R. Hui, Z. Wang, O. Kesler, L. Rose, J. Jankovic et al., Thermal plasma spraying for SOFCs: Applications, potential advantages, and challenges, Journal of Power Sources, vol.170, issue.2, pp.308-323, 2007.

R. Vaßen, D. Hathiramani, J. Mertens, V. Haanappel, and I. Vinke, Manufacturing of high performance solid oxide fuel cells (SOFCs) with atmospheric plasma spraying, Surface and Coatings Technology, vol.202, issue.3, pp.499-508, 2007.

C. Tendero, C. Tixier, P. Tristant, J. Desmaison, and P. Leprince, Atmospheric pressure plasmas: A review, Spectrochimica Acta Part B: Atomic Spectroscopy, vol.61, issue.1, pp.2-30, 2006.

X. Chen, S. Kuroda, T. Ohnuki, H. Araki, M. Watanabe et al., Effects of processing parameters on the deposition of yttria partially stabilized zirconia coating during suspension plasma spray, Journal of the American Ceramic Society, vol.99, issue.11, pp.3546-3555, 2016.

L. Zhu, N. Zhang, R. Bolot, M. Planche, H. Liao et al., Very low pressure plasma sprayed yttria-stabilized zirconia coating using a low-energy plasma gun, Applied Physics A, vol.105, issue.4, pp.991-996, 2011.

A. Vardelle, C. Moreau, J. Akedo, H. Ashrafizadeh, C. C. Berndt et al., The 2016 Thermal Spray Roadmap, vol.25, pp.1376-1440, 2016.

F. Shao, H. Zhao, C. Liu, X. Zhong, Y. Zhuang et al., Dense yttriastabilized zirconia coatings fabricated by plasma spray-physical vapor deposition, Ceramics International, vol.43, issue.2, pp.2305-2313, 2017.

G. Mauer, R. Vaßen, and D. Stöver, Thin and Dense Ceramic Coatings by Plasma Spraying at Very Low Pressure, Journal of Thermal Spray Technology, vol.19, issue.1, pp.495-501, 2010.

P. He, S. Yin, C. Song, F. Lapostolle, and H. Liao, Characterization of YttriaStabilized Zirconia Coatings Deposited by Low-Pressure Plasma Spraying, Journal of Thermal Spray Technology, vol.25, issue.3, pp.558-566, 2016.

Q. Chen, C. Li, J. Zhao, G. Yang, and C. Li, Microstructure of YSZ coatings deposited by PS-PVD using 45 kW shrouded plasma torch, Materials and Manufacturing Processes, vol.31, issue.9, pp.1183-1191, 2016.

A. Hospach, G. Mauer, R. Vaßen, and D. Stöver, Columnar-structured thermal barrier coatings (TBCs) by thin film low-pressure plasma spraying (LPPS-TF), Journal of Thermal Spray Technology, vol.20, issue.1-2, pp.116-120, 2011.

M. Gindrat, H. M. Höhle, K. Von-niessen, P. Guittienne, D. Grange et al., Plasma Spray-CVD: A New Thermal Spray Process to Produce Thin Films from Liquid or Gaseous Precursors, Journal of Thermal Spray Technology, vol.20, issue.4, pp.882-887, 2011.

K. Von-niessen and M. Gindrat, Plasma Spray-PVD: A New Thermal Spray Process to Deposit Out of the Vapor Phase, Journal of Thermal Spray Technology, vol.20, issue.4, pp.736-743, 2011.

K. Von-niessen, M. Gindrat, and A. Refke, Vapor Phase Deposition Using Plasma Spray-PVD?, Journal of Thermal Spray Technology, vol.19, issue.1, pp.502-509, 2010.

L. Gao, H. Guo, L. Wei, C. Li, S. Gong et al., Microstructure and mechanical properties of yttria stabilized zirconia coatings prepared by plasma spray physical vapor deposition, Ceramics International, vol.41, issue.7, pp.8305-8311, 2015.

Y. Gao, D. M. Yang, C. Q. Sun, and Z. Y. Chen, Deposition of YSZ Coatings in a Chamber at Pressures below 100 Pa Using Low-Power Plasma Spraying with an Internal Injection Powder Feeding, Journal of Thermal Spray Technology, vol.22, issue.7, pp.1253-1258, 2013.

L. Zhu, N. N. Zhang, F. Sun, R. Bolot, M. P. Planche et al., Thin Yttria-Stabilized Zirconia Coatings Deposited by Low-Energy Plasma Spraying Under Very Low Pressure Condition, Journal of Thermal Spray Technology, vol.20, issue.5, pp.1118-1124, 2011.

W. C. Oliver and G. M. Pharr, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, Journal of materials research, vol.7, issue.06, pp.1564-1583, 1992.
URL : https://hal.archives-ouvertes.fr/hal-01518596

M. F. Smith, A. C. Hall, J. D. Fleetwood, and P. Meyer, Very Low Pressure Plasma Spray-A Review of an Emerging Technology in the Thermal Spray Community, Coatings, vol.1, issue.2, pp.117-132, 2011.

J. Aubreton, M. Elchinger, V. Rat, and P. Fauchais, Two-temperature transport coefficients in argon-helium thermal plasmas, Journal of Physics D: Applied Physics, vol.37, issue.1, p.34, 2003.

G. Mauer, A. Hospach, and R. Vaßen, Process development and coating characteristics of plasma spray-PVD, Surface and Coatings Technology, vol.220, pp.219-224, 2013.

M. I. Boulos, P. Fauchais, and E. Pfender, Thermal plasmas: fundamentals and applications

G. Witz, V. Shklover, W. Steurer, S. Bachegowda, and H. P. Bossmann, Phase Evolution in Yttria-Stabilized Zirconia Thermal Barrier Coatings Studied by Rietveld Refinement of X-Ray Powder Diffraction Patterns, Journal of the American Ceramic Society, vol.90, issue.9, pp.2935-2940, 2007.

C. R. Hubbard and R. L. Snyder, RIR-measurement and use in quantitative XRD, Powder Diffraction, vol.3, issue.2, pp.74-77, 1988.

A. K. Zak, W. A. Majid, M. E. Abrishami, and R. Yousefi, X-ray analysis of ZnO nanoparticles by Williamson-Hall and size-strain plot methods, Solid State Sciences, vol.13, issue.1, pp.251-256, 2011.

X. Q. Cao, R. Vassen, and D. Stoever, Ceramic materials for thermal barrier coatings, Journal of the European Ceramic Society, vol.24, issue.1, pp.1-10, 2004.

J. Nielsen and J. Hjelm, Impedance of SOFC electrodes: A review and a comprehensive case study on the impedance of LSM:YSZ cathodes, Electrochimica Acta, vol.115, pp.31-45, 2014.

A. B. Stambouli and E. Traversa, Solid oxide fuel cells (SOFCs): a review of an environmentally clean and efficient source of energy, Renewable and sustainable energy reviews, vol.6, issue.5, pp.433-455, 2002.

N. P. Padture, M. Gell, and E. H. Jordan, Thermal barrier coatings for gas-turbine engine applications, Science, vol.296, issue.5566, pp.280-284, 2002.

K. Khor, Y. Gu, D. Pan, and P. Cheang, Microstructure and mechanical properties of plasma sprayed HA/YSZ/Ti-6Al-4V composite coatings, Biomaterials, vol.25, issue.18, pp.4009-4017, 2004.

P. Fauchais, Understanding plasma spraying, Journal of Physics D: Applied Physics, vol.37, issue.9, p.86, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00944489

A. Vardelle, C. Moreau, N. J. Themelis, and C. Chazelas, A perspective on plasma spray technology, Plasma Chemistry and Plasma Processing, vol.35, pp.491-509, 2015.

L. Pawlowski, Suspension and solution thermal spray coatings, Surface and Coatings Technology, vol.203, issue.19, pp.2807-2829, 2009.

H. Kassner, R. Siegert, D. Hathiramani, R. Vassen, and D. Stoever, Application of suspension plasma spraying (SPS) for manufacture of ceramic coatings, Journal of Thermal Spray Technology, vol.17, issue.1, pp.115-123, 2008.

P. Fauchais, V. Rat, C. Delbos, J. F. Coudert, T. Chartier et al., Understanding of suspension DC plasma spraying of finely structured coatings for SOFC, IEEE transactions on plasma science, vol.33, issue.2, pp.920-930, 2005.

R. Rampon, F. L. Toma, G. Bertrand, and C. Coddet, Liquid plasma sprayed coatings of yttria-stabilized zirconia for SOFC electrolytes, Journal of Thermal Spray Technology, vol.15, issue.4, pp.682-688, 2006.

P. Xu, J. Mostaghimi, T. Coyle, and L. Pershin, Suspension Plasma Spray of Yttria Stabilized Zirconia Coatings, Advances in High Temperature Ceramic Matrix Composites and Materials for Sustainable Development, vol.263, p.451, 2017.

W. Fan and Y. Bai, Review of suspension and solution precursor plasma sprayed thermal barrier coatings, Ceramics International, 2016.

N. Curry, Z. Tang, N. Markocsan, and P. Nylén, Influence of bond coat surface roughness on the structure of axial suspension plasma spray thermal barrier coatings-Thermal and lifetime performance, Surface and Coatings Technology, vol.268, pp.15-23, 2015.

M. Jadidi, M. Mousavi, S. Moghtadernejad, and A. Dolatabadi, A ThreeDimensional Analysis of the Suspension Plasma Spray Impinging on a Flat Substrate, Journal of Thermal Spray Technology, vol.24, issue.1, pp.11-23, 2015.

A. Vardelle, C. Moreau, J. Akedo, H. Ashrafizadeh, C. C. Berndt et al., The 2016 Thermal Spray Roadmap, vol.25, pp.1376-1440, 2016.

P. L. Fauchais, J. V. Heberlein, and M. I. Boulos, Thermal spray fundamentals: from powder to part, 2014.
URL : https://hal.archives-ouvertes.fr/hal-00946557

D. Zhou, O. Guillon, and R. Vaßen, Development of YSZ Thermal Barrier Coatings Using Axial Suspension Plasma Spraying, vol.7, p.120, 2017.

A. Ganvir, S. Joshi, N. Markocsan, and R. Vassen, Tailoring columnar microstructure of axial suspension plasma sprayed TBCs for superior thermal shock performance, Materials & Design, 2018.

A. Ganvir, V. Vaidhyanathan, N. Markocsan, M. Gupta, Z. Pala et al., Failure analysis of thermally cycled columnar thermal barrier coatings produced by high-velocity-air fuel and axial-suspension-plasma spraying: A design perspective, Ceramics International, vol.44, issue.3, pp.3161-3172, 2018.

D. Waldbillig and O. Kesler, Characterization of metal-supported axial injection plasma sprayed solid oxide fuel cells with aqueous suspension plasma sprayed electrolyte layers, Journal of Power Sources, vol.191, issue.2, pp.320-329, 2009.

Y. X. Zhao, D. C. Li, X. H. Zhong, H. Y. Zhao, L. Wang et al., Thermal shock behaviors of YSZ thick thermal barrier coatings fabricated by suspension and atmospheric plasma spraying, Surface & Coatings Technology, vol.249, pp.48-55, 2014.

Z. Tang, H. Kim, I. Yaroslavski, G. Masindo, Z. Celler et al., Novel thermal barrier coatings produced by axial suspension plasma spray, International Thermal Spray Conference and Exposition, pp.27-29, 2011.

P. Soko?owski, P. Nylen, R. Musalek, L. ?atka, S. Kozerski et al., The microstructural studies of suspension plasma sprayed zirconia coatings with the use of high-energy plasma torches, Surface and Coatings Technology, vol.318, pp.250-261, 2017.

, NIST Atomic Spectra Database Lines Form

G. Mauer, A. Hospach, and R. Vaßen, Process development and coating characteristics of plasma spray-PVD, Surface and Coatings Technology, vol.220, pp.219-224, 2013.

J. Aubreton, M. Elchinger, V. Rat, and P. Fauchais, Two-temperature transport coefficients in argon-helium thermal plasmas, Journal of Physics D: Applied Physics, vol.37, issue.1, p.34, 2003.

K. Vanevery, M. J. Krane, R. W. Trice, H. Wang, W. Porter et al., Column formation in suspension plasma-sprayed coatings and resultant thermal properties, Journal of thermal spray technology, vol.20, issue.4, pp.817-828, 2011.

P. Klemens, Theory of thermal conduction in thin ceramic films, International journal of thermophysics, vol.22, issue.1, pp.265-275, 2001.

N. Shi, S. Yu, S. Chen, L. Ge, H. Chen et al., Dense thin YSZ electrolyte films prepared by a vacuum slurry deposition technique for SOFCs, Ceramics International, vol.43, issue.1, pp.182-186, 2017.

P. Fauchais, R. Etchart-salas, C. Delbos, M. Tognonvi, V. Rat et al., Suspension and solution plasma spraying of finely structured layers: potential application to SOFCs, Journal of Physics D: Applied Physics, vol.40, issue.8, p.2394, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00145742

C. R. Hubbard and R. L. Snyder, RIR-measurement and use in quantitative XRD, Powder Diffraction, vol.3, issue.2, pp.74-77, 1988.
DOI : 10.1017/s0885715600013257
URL : https://www.cambridge.org/core/services/aop-cambridge-core/content/view/FAFA5DB13C809BCB91BE073F223BC3AB/S0885715600013257a.pdf/div-class-title-rir-measurement-and-use-in-quantitative-xrd-div.pdf

A. K. Zak, W. A. Majid, M. E. Abrishami, and R. Yousefi, X-ray analysis of ZnO nanoparticles by Williamson-Hall and size-strain plot methods, Solid State Sciences, vol.13, issue.1, pp.251-256, 2011.

G. Williamson and W. Hall, X-ray line broadening from filed aluminium and wolfram, Acta metallurgica, vol.1, issue.1, pp.22-31, 1953.
DOI : 10.1016/0001-6160(53)90006-6

V. Mote, Y. Purushotham, and B. Dole, Williamson-Hall analysis in estimation of lattice strain in nanometer-sized ZnO particles, Journal of Theoretical and Applied Physics, vol.6, issue.1, p.6, 2012.

P. Carpio, E. Rayón, L. Paw?owski, A. Cattini, R. Benavente et al., Microstructure and indentation mechanical properties of YSZ nanostructured coatings obtained by suspension plasma spraying, Surface and Coatings Technology, vol.220, pp.237-243, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00809221

, Young's modulus of TiN coatings decreased from 16.3±1.9 to 13.4±3.4 and from 234.2±17.8 GPa to 202.9±26.5 GPa, respectively. Nevertheless, they can also improve the mechanical properties of the Ti-6Al-4V substrate, whose average microhardness and Young's modulus are 5

C. Leyens and M. Peters, Titanium and titanium alloys: fundamentals and applications

I. Gurrappa, Characterization of titanium alloy Ti-6Al-4V for chemical, marine and industrial applications, Materials Characterization, vol.51, issue.2, pp.131-139, 2003.
DOI : 10.1016/j.matchar.2003.10.006

C. Elias, J. Lima, R. Valiev, and M. Meyers, Biomedical applications of titanium and its alloys, vol.60, pp.46-49, 2008.
DOI : 10.1007/s11837-008-0031-1

D. M. Brunette, P. Tengvall, M. Textor, and P. Thomsen, Titanium in medicine: material science, surface science, engineering, biological responses and medical applications
DOI : 10.1007/978-3-642-56486-4

M. Peters, J. Kumpfert, C. H. Ward, and C. Leyens, Titanium alloys for aerospace applications, Advanced Engineering Materials, vol.5, issue.6, pp.419-427, 2003.
DOI : 10.1002/adem.200310095

A. Zhecheva, W. Sha, S. Malinov, and A. Long, Enhancing the microstructure and properties of titanium alloys through nitriding and other surface engineering methods, Surface and Coatings Technology, vol.200, issue.7, pp.2192-2207, 2005.

X. Liu, X. Meng, H. Liu, G. Shi, S. Wu et al., Development and characterization of laser clad high temperature selflubricating wear resistant composite coatings on Ti-6Al-4V alloy, Materials & Design, vol.55, pp.404-409, 2014.
DOI : 10.1016/j.matdes.2013.09.038

L. Zhao and E. Lugscheider, Reactive plasma spraying of TiAl6V4 alloy, Wear, vol.253, issue.11, pp.1214-1218, 2002.
DOI : 10.1016/s0043-1648(02)00246-6

H. C. Man, M. Bai, and F. T. Cheng, Laser diffusion nitriding of Ti-6Al-4V for improving hardness and wear resistance, Applied Surface Science, vol.258, issue.1, pp.436-441, 2011.

D. G. Bansal, O. L. Eryilmaz, and P. J. Blau, Surface engineering to improve the durability and lubricity of Ti-6Al-4V alloy, Wear, vol.271, issue.9, 2011.

A. F. Saleh, J. H. Abboud, and K. Y. Benyounis, Surface carburizing of Ti-6Al-4V alloy by laser melting, Optics and Lasers in Engineering, vol.48, issue.3, pp.257-267, 2010.

Y. F. Liu, J. S. Mu, X. Y. Xu, and S. Z. Yang, Microstructure and dry-sliding wear properties of TiC-reinforced composite coating prepared by plasma-transferred arc weld-surfacing process, Materials Science and Engineering: A, vol.458, issue.1-2, pp.366-370, 2007.
DOI : 10.1016/j.msea.2006.12.086

X. Liu, P. K. Chu, and C. Ding, Surface modification of titanium, titanium alloys, and related materials for biomedical applications, Materials Science and Engineering: R: Reports, vol.47, issue.3-4, pp.49-121, 2004.

M. Das, V. K. Balla, D. Basu, S. Bose, and A. Bandyopadhyay, Laser processing of SiC-particle-reinforced coating on titanium, Scripta Materialia, vol.63, issue.4, pp.438-441, 2010.

D. Nolan, S. W. Huang, V. Leskovsek, and S. Braun, Sliding wear of titanium nitride thin films deposited on Ti-6Al-4V alloy by PVD and plasma nitriding processes, Surface and Coatings Technology, vol.200, pp.5698-5705, 2006.
DOI : 10.1016/j.surfcoat.2005.08.110

L. Ceschini, E. Lanzoni, C. Martini, D. Prandstraller, and G. Sambogna, Comparison of dry sliding friction and wear of Ti6Al4V alloy treated by plasma electrolytic oxidation and PVD coating, Wear, vol.264, issue.1, pp.86-95, 2008.

H. E. Rebenne and D. G. Bhat, Review of CVD TiN coatings for wear-resistant applications: deposition processes, properties and performance, Surface and Coatings Technology, vol.63, issue.1, pp.1-13, 1994.
DOI : 10.1016/s0257-8972(05)80002-7

C. Martini and L. Ceschini, A comparative study of the tribological behaviour of PVD coatings on the Ti-6Al-4V alloy, Tribology International, vol.44, issue.3, pp.297-308, 2011.

F. Lang and Z. Yu, The corrosion resistance and wear resistance of thick TiN coatings deposited by arc ion plating, Surface and Coatings Technology, vol.145, issue.13, pp.80-87, 2001.
DOI : 10.1016/s0257-8972(01)01284-1

L. Xiao, D. Yan, J. He, L. Zhu, Y. Dong et al., Nanostructured TiN coating prepared by reactive plasma spraying in atmosphere, Applied Surface Science, vol.253, issue.18, pp.7535-7539, 2007.
DOI : 10.1016/j.apsusc.2007.03.062

A. Kobayashi, Formation of TiN coatings by gas tunnel type plasma reactive spraying, Surface and Coatings Technology, vol.132, issue.2-3, pp.152-157, 2000.
DOI : 10.1016/s0257-8972(00)00725-8

E. Galvanetto, F. P. Galliano, F. Borgioli, U. Bardi, and A. Lavacchi, XRD and XPS study on reactive plasma sprayed titanium-titanium nitride coatings, Thin Solid Films, vol.384, issue.2, pp.223-229, 2001.
DOI : 10.1016/s0040-6090(00)01871-x

T. Bacci, L. Bertamini, F. Ferrari, F. P. Galliano, and E. Galvanetto, Reactive plasma spraying of titanium in nitrogen containing plasma gas, Materials Science and Engineering: A, vol.283, issue.1-2, pp.189-195, 2000.
DOI : 10.1016/s0921-5093(00)00704-8

G. Ingo, S. Kaciulis, A. Mezzi, T. Valente, F. Casadei et al., Characterization of composite titanium nitride coatings prepared by reactive plasma spraying, Electrochimica Acta, vol.50, issue.23, pp.4531-4537, 2005.
DOI : 10.1016/j.electacta.2004.10.089

W. C. Oliver and G. M. Pharr, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, Journal of materials research, vol.7, issue.06, pp.1564-1583, 1992.
DOI : 10.1557/jmr.1992.1564
URL : https://hal.archives-ouvertes.fr/hal-01518596

J. Cui, Z. Xu, J. Zhang, Q. Nie, G. Xu et al., Online diagnosis of electron excitation temperature in CH4+H2 discharge plasma at atmospheric pressure by optical emission spectra, Science in China Series G: Physics, Mechanics and Astronomy, vol.51, issue.12, pp.1892-1896, 2008.

J. Venables, G. Spiller, and M. Hanbucken, Nucleation and growth of thin films, Reports on Progress in Physics, vol.47, issue.4, p.399, 1984.

M. I. Jones, I. R. Mccoll, and D. M. Grant, Effect of substrate preparation and deposition conditions on the preferred orientation of TiN coatings deposited by RF reactive sputtering, Surface and Coatings Technology, vol.132, issue.2, pp.143-151, 2000.

G. Abadias, Stress and preferred orientation in nitride-based PVD coatings, Surface and Coatings Technology, vol.202, issue.11, pp.2223-2235, 2008.
DOI : 10.1016/j.surfcoat.2007.08.029

A. Leyland and A. Matthews, On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour, Wear, vol.246, issue.1-2, pp.1-11, 2000.