Phase separated borosilicate glasses for dental applications : mixture design in relation with the ion release in acid condition and microstructure - TEL - Thèses en ligne Accéder directement au contenu
Thèse Année : 2018

Phase separated borosilicate glasses for dental applications : mixture design in relation with the ion release in acid condition and microstructure

Verres borosilicatés à séparation de phase pour applications dentaires : formulation de la composition en relation avec la dissolution des ions en milieu acide et la microstructure

Résumé

The research for efficient dental materials has been a constant throughout the history of dentistry. As better materials emerged, the development of ever more innovative materials has been pushed forward. Moreover the combination of different sciences such as chemistry, biology, physics and engineering has provided better knowledge to the demanding requirements of the dental restorations. The BIODENSOL project is a European commission funded mobility research project managed by the University of Lyon and LUCIDEON Ltd, Stoke-on-Trent, UK. The project is designed to help building relations between academic and commercial research to enhance medical innovations and associates solid state chemists and hospital practicioners in direct contact with the patients with dental problems. This project proposes three PhD studies to address the problems of caries and enamel erosion by acidic foods (leading to sensitive teeth) encouraging re-mineralization to help avoid these problems. The researches independently evolved in three different routes investigating three different materials that could provide potential solutions. The main objective of this thesis concerns the study of Borosilicate phase separated glass powders for glass ionomer cements. As silicate bioglasses developed by Hench in 1969, regarding their bioactivity and antimicrobial properties, borosilicates glasses are promising materials and have been widely studied for biomedical applications for scaffolds in soft tissues and for bone repair and could be of interest in dentistry. The glass system studied here is a borosilicate glass (SiO2-K2O-B2O3-CaO-Al2O3) with a strong tendency to phase separate. The objective of this work is to characterize a series of the novel borosilicate formulations and to understand the mechanism and kinetic of dissolution related to their microstructure and composition. The use of thermal treatment to promote phase separation as a means of influencing the rate of ion leaching was especially studied. The dissolution process of borosilicates in neutral body solution (simulating body fluid) or in acid solution (simulating scenarios where bacteria or acid foods are present) provides information regarding the type and concentration of species released by the glass. Different compositions have been investigated in which SiO2 and K2O are fixed while the other elements are varied in order to assess the effect on the phase separation. As the novel borosilicates produced with the meltquenching technique is immersed in an aqueous environment, B-, Si-, Ca-, K- and Al- species are released to different degrees as a function of the time. Ion leaching trends can be related to the glass chemistry and microstructure. It has been shown that the amorphous phase separation (APS) causes an initially homogeneous single phase to separate into two or more phases of different compositions. The degree of interconnectivity of the two glass phases depend on the nature of the phase separation mechanism. This process can occur by a nucleation and growth process which gives isolated spherical particles or by spinodal decomposition where an interconnected structure is obtained. It is significant that before a heat-treatment the glasses are optically clear, but turn opalescent to different degrees following a heat treatment depending on the wt% of the elements in the composition. The pattern of the ion release implies that one of the phases is more reactive and susceptible to acid attack and will be leached out from the glass earlier. The other phase will remain in the cement improving the mechanical properties of the dental restorative material. Moreover, the mixing of the glass powder with a commercial poly(acrylic acid) has shown interesting mechanical and bioactive properties. This work showed how the ions leaching are influenced by the glass composition and the heat-treatment... [etc]
La recherche de matériaux dentaires efficaces est une préoccupation constante de toute l'histoire de la dentisterie. Avec l'émergence de meilleurs produits, le développement de matériaux toujours plus innovants s'est imposé. De plus, la combinaison de différentes sciences comme la chimie, la biologie, la physique et l'ingénierie a permis de mieux connaître les exigences liées à la restauration dentaire. Le projet BIODENSOL est un projet de recherche et de mobilité doctorale entre l'Université de Lyon et LUCIDEON Ltd (Stoke-on- Trent, Royaume-Uni), financé par la Commission européenne. Le projet a été conçu pour favoriser les relations entre la recherche académique et les applications commerciales, pour améliorer les innovations médicales et associer des chimistes de l'état solide avec des praticiens hospitaliers en contact direct avec les patients ayant des problèmes dentaires. Ce projet proposait trois thèses de doctorat permettant de répondre aux conséquences des caries et d'érosion de l'émail par les aliments acides, l'idée de base étant de favoriser la reminéralisation pour éviter ces problèmes. Les recherches ont évolué de manière indépendante selon trois voies distinctes examinant trois matériaux différents qui pourraient amener des solutions potentielles. Le sujet principal de cette thèse concerne l'étude de poudres de verre borosilicaté présentant une séparation de phases et pouvant être incorporées dans des ciments verre ionomères. Les verres borosilicatés sont des matériaux prometteurs qui ont été largement étudiés pour des applications biomédicales, comme par exemple les échafaudages dans les tissus mous où la réparation osseuse. Par analogie avec les verres silicatés développés par Hench en 1969, qui sont reconnus pour leur bioactivité et leurs propriétés antimicrobiennes, les verres borosilicatés pourraient intéresser la dentisterie. Le système de verre étudié ici est un verre basé sur l'association de 5 constituants, SiO2-K2O-B2O3-CaO-Al2O3, qui a une forte tendance à la séparation des phases. L'objectif de ce travail est d'élaborer par fusion/trempe puis caractériser une série de nouvelles formulations de verres borosilicatés, puis de comprendre le mécanisme et la cinétique de dissolution en relation avec leur microstructure et leur composition. La variation des proportions de chaque constituant est déterminée par l'approche des plans d'expérience. L'utilisation d'un traitement thermique pour favoriser la séparation des phases en vue d'influencer le taux de libération cationique a été spécialement étudiée. Le processus de dissolution des borosilicates dans une solution aqueuse neutre (fluide corporel simulé) ou dans une solution acide (simulant des scénarios où des bactéries ou des aliments acides sont présents) fournit des informations sur le type et la concentration des espèces libérées par le verre. Différentes compositions ont été étudiées dans lesquelles SiO2 et K2O sont fixés tandis que les autres éléments varient afin d'évaluer l'effet sur la séparation de phases. Les cinétiques de dissolution des ions B-, Si-, Ca-, K- et Al- peuvent alors être reliées à la chimie du verre et à la microstructure. La séparation de phases amorphes (APS) provoque la séparation d'une phase unique initialement homogène en deux phases ou plus de compositions différentes. Le degré d'interconnectivité des deux phases vitreuses dépend de la nature du mécanisme de séparation de phases. Les verres élaborés sont optiquement transparents, puis deviennent plus ou moins opalescents suite à un traitement thermique. Le degré d'opacité est clairement dépendant de la proportion des éléments entrant dans la composition du verre. Le schéma de la libération d'ions implique que l'une des phases est plus réactive et sensible à l'attaque ; elle sera dissoute plus rapidement du verre... [etc]
Fichier principal
Vignette du fichier
TH2018LIZZIFEDERICO.pdf (27.95 Mo) Télécharger le fichier
Origine : Version validée par le jury (STAR)
Loading...

Dates et versions

tel-01875728 , version 1 (17-09-2018)

Identifiants

  • HAL Id : tel-01875728 , version 1

Citer

Federico Lizzi. Phase separated borosilicate glasses for dental applications : mixture design in relation with the ion release in acid condition and microstructure. Biomaterials. Université de Lyon, 2018. English. ⟨NNT : 2018LYSE1076⟩. ⟨tel-01875728⟩
251 Consultations
122 Téléchargements

Partager

Gmail Facebook X LinkedIn More