A. , Fixations mécaniques : les fondamentaux », Les ouvrages du Cetim, N° 3E48, 2013.

R. Cathiard, ». Assemblages-vissés, and E. Cours, , 2005.

N. F. En-iso, 898-1, « Caractéristiques mécaniques des éléments de fixation en acier au carbone et en acier allié, pp.335-3931, 2009.

F. E. , Fastenal Engineering & Design Support, « Embrittlement, 2016.

F. Nasirpouri, H. Alizadeh, and M. Hosseingholizadeh, « Failure analysis of a carbon steel screw under service in the presence of hydrogen sulphide», Engineering Failure analysis 18, pp.2316-2323, 2011.

N. Joffret and J. Perrier, Techniques de l'ingénieur

I. Robertson, P. Sofronis, A. Nagao, M. L. Martin, S. Wang et al., Hydrogen Embrittlement Understood, vol.46, pp.1085-1103, 2015.

N. Uno, M. Nagata, M. Kubota, T. Tarui, H. Kanisawa et al., Super High Strength Bolt, SHTB ». s.l.: Nippon Steel, pp.95-104, 2008.

A. M. Brass, J. Chêne, and L. Coudreuse, « Fragilisation des aciers par l'hydrogène : mécanismes et étude et prévention », Techniques de l'ingénieur, pp.175-176

A. Barnoush, Hydrogen Embrittlement, 2011.

J. Chêne, hydrogène dans les matériaux métalliques en relation avec les interactions plasticité-environnement», pp.131-145, 2007.

A. Fleurentin and J. Favergeon, « Caractérisation par traction lente de l'hydrogène, du phosphore et du carbone et de leur effet sur l'endommagement, Traitements et Matériaux, N° 0410, 2011.

C. Ly, « Caractérisation d'aciers à très haute limite d'élasticité vis-à-vis de la fragilisation par l'hydrogène, 2009.

A. W. Thompson, I. M. Bernstein, and G. M. , « The role of metallurgical variables in hydrogen assisted environmental fracture, Advances in Corrosion Science and Technology, vol.7, pp.53-175, 1980.

M. R. Louthan and . Hydrogen, Embrittlement of Metals: a primer for the failure analyst», J Fail. Anal. And Preven, vol.8, pp.289-307, 2008.

R. Cathiard, M. Confente, D. Forgeoux, B. Resiak, M. Charpentier et al., « Développement d'une nouvelle nuance d'acier pour visserie à hautes caractéristiques, Congrès CIMATTS, 2009.

P. Sommer, « failure through hydrogen absorpion in heat treatment processes in endothermic furnace atmospheres », The Heat Treatment Market, 22014.

I. Moro, « Fragilisation par l'hydrogène gazeux d'un acier ferrito-perlitique de grade API X80, 2009.

R. J. Wanhill, S. A. Barter, S. P. Lynch, and D. R. Gerrard, « Corrosion Fatigue and Environmentally Assisted Cracking in Aging Military Vehicles, NATO Science and Technology Organization, vol.20, 2011.

K. Fraser and . Hydrogen, Effects on Carbon steel used Fuel Containers», disponible sur www.researchgate, /2683225021_Hydrogen_effect .., Integrity Corrosion Consulting Ltd, 2016.

T. Sourmail, A review of the effect of cold-work on resistance to sulphide stress cracking», disponible sur www.thomas-sourmail.net, Presented at Corrosion, p.24, 2006.

P. D. Escobar, T. Depover, E. Wallaert, L. Duprez, M. Verhaege et al., Thermal desorption spectroscopy study of the interaction between hydrogen and different microstructural constituents in lab cast Fe-C alloys, Corrosion Science, vol.65, pp.199-208, 2012.

S. Frappart, « Des éléments de compréhension sur les mécanisme de transport et de ségrégation de l'hydrogène dans les aciers martensitiques trempés et revenus à haute limite d'élasticité, 2011.

J. Pokorny, .. A. Pokorny, and . Album-de-métallographie, IRSID les cahiers du CESSID, p.148, 1971.

S. L. Chan, Hydrogen trapping ability of steels with different microstructures, vol.22, pp.43-53, 2009.
DOI : 10.1080/02533839.1999.9670440

A. Salimi, H. M. Zadeh, R. Toroghinejad, and M. , « Influence of sample direction on the impact toughness of the API-X42 microalloyed steel with a banded structure, Materials and technology, vol.3, pp.385-389, 2013.

Y. Sakamoto and T. Mantani, Effect of quenching and tempering on diffusion of hydrogen in carbon steel, vol.17, pp.743-748, 1976.

G. W. Hong and J. Y. Lee, « The interaction of hydrogen and the cementite-ferrite interface in carbon steel, Journal of materials science, vol.18, pp.271-277, 1983.

L. Tau, S. L. Chan, and C. S. Shin, « Hydrogen enhanced fatigue crack propagation of bainitic and tempered martensitic steels, Corrosion Science, vol.38, issue.11, pp.2049-2060, 1996.
DOI : 10.1016/s0010-938x(96)89123-2

G. Murry,

H. Asahi, D. Hirakami, and S. Yamasaki, Hydrogen trapping behavior in vanadium-added steel, vol.43, pp.527-533, 2003.

A. Reyes and D. , Evolution de l'état de précipitation au cours de l'austénitisation d'aciers microalliés au vanadium et au niobium, 2007.

T. Tarui and M. Kubota, Approaches for fundamental principles 1: Evaluation method of hydrogen embrittlement and improvement techniques of delayed fracture, Nippon Steel Technical Report, vol.101, 2012.

K. E. Thelning and M. Kubota, Hydrogen reembrittlement susceptibility of ultra high strength steels, pp.14-24, 1984.

J. Gonzalez, F. Gutierrez-solana, and J. M. Varona, The Effects of Microstructure, Strength Level, and Crack Propagation Mode on Stress Corrosion Cracking Behavior of, p.4135

. Steel, Metallurgical and Materials Transactions A, vol.27, pp.281-290, 1996.

J. P. Pottelette, « Calibrage à froid des barres d'acier », Techniques de l'ingénieur, pp.3-100

A. Sabih and J. A. Nemes, « Internal ductile failure mechanisms in steel cold heading process, Journal of Materials Processing technology, vol.209, pp.4292-4311, 2009.

, Particularités métallurgiques des vis obtenues par écrouissage», 2008.

K. O. Findley, M. K. O'brien, and H. Nako, «critical assessment 19: mechanisms of hydrogen induced cracking in pipeline steels, Materials Science and Technology, vol.32, issue.1, pp.1-8, 2016.

J. H. Ryu, Hydrogen Embrittlement in TRP and TWIP Steels, 2012.

B. Hadzipasic, A. Malina, J. Niznik, and S. , The influence of microstructure on hydrogen diffusion in dual phase steel, vol.17, pp.129-137, 2011.

H. Mohrbacher, Fundamentals and applications of Mo and Nb alloying in high performance steels, The use of molybdenum and niobium in ultra-high strength multiphase steels, vol.1, pp.185-208, 2011.

T. Depover, « Evaluation of hydrogen Embrittlement by mechanical testing, 2011.

J. Ma, X. Zhang, S. Cheng, and H. Gao, « influence of partitioning process on the microstructure and mechanical properties of high deformability oil-gas pipeline, Advances in Mechanical Engineering, vol.869481, pp.1-11, 2014.

G. Lovicu, P. Bagliani, E. , D. Sanctis, M. Dimatteo et al., « Hydrogen Embrittlement of a medium carbon Q&P steel », Metallurgia fisica memorie, La Metallurgia Italiana, p.6, 2013.

J. Masol, Etude des assemblages boulonnés à chargement faiblement excentré soumis à des sollicitations de fatigue », 1994.

B. Besset and R. Souvignet, Dimensionnement filetages fortement chargés», 1993.

E. Lunarska, K. Nikiforow, and E. Sitko, « Improving the resistance to stress corrosion cracking and to hydrogen embrittlement of bainite high strength steel, Advanced in Materials Science, vol.4, pp.35-41, 2003.

F. Dabosi, A. Petit, and J. , « Corrosion par piqures, par crevasses et corrosion intergranulaire, pp.112-143, 1982.

H. Saglam and R. Kuz, « Performance of internal thread rolling head and the mechanical properties of rolled thread, th International Advanced Technologies Symposium (IATS'11, 2011.

N. F. En-iso-15330, «Eléments de fixation-Essai de précharge pour la détection de la fragilisation par l'hydrogène-méthode des plaques parallèles, pp.335-3931, 1999.

N. F. En-iso, 15630-3, «Aciers pour l'armature et la précontrainte du béton, méthodes d'essai, pp.335-3931, 2002.

M. Ichiba, Y. Nidome, S. Nakamura, J. Sakai, and S. Wang, Corrosion behavior of prestressing steel in a solution of 20% ammonium thiocyanate, 2013.

A. Oudriss, J. Creus, X. Feaugeas, and P. Sofronis, « Développement d'une approche ingénieur de classification des aciers face à leur degré de résistance à la fragilisation par l'hydrogène», 2015.

A. Fleurentin, « Fragilisation hydrogène, Rapport final de l'étude CETIM, vol.98, p.52279, 2013.

J. R. Keough, W. Laird, A. D. Godding, and . Austempering, ASM Handbook, vol.4, pp.152-163, 1995.

A. Perlade, « Rupture par clivage de microstructures d'aciers bainitiques obtenues en conditions de soudage, 2001.

S. Lubin, Etude des mécanismes de la transformation de phase bainitique dans les aciers bas carbone, 2009.

R. K. Steele, « Steel alloys with lower bainite microstructures for use in railroad cars and track, 2002.

J. C. Hell, Aciers bainitiques sans carbure : caractérisations microstructurales multiéchelles et in situ de la transformation austénitique-bainite et relations entre microstructure et comportement mécanique, 2011.

L. J. Habraken and M. Economopoulos, «Bainitic microstructures in low-carbon alloys steels and their mechanical properties», pp.69-108, 1967.

A. Gourgues, H. M. Flower, T. C. Lindley, and E. , Electron backscattering diffraction study of acicular ferrite, bainite, and martensite steel microstructures, Materials science and technology, vol.16, pp.26-40, 2000.

S. Zajac, J. Komenda, P. Morris, P. Dierickx, S. Matera et al., « Quantitative structure-property relationships for complex bainitic microstructures», European Commission, technical steel research, 2005.

S. Zajac, V. Schwinn, and K. , «Characterisation and quantification of complex bainitic microstructures in high and ultra-high strength linepipe steels», Materials Science Forum, pp.387-394, 2005.
DOI : 10.4028/0-87849-981-4.387

E. Boucard, « Etude de l'influence de l'état métallurgique de l'austénite sur la microstructure de transformation de phase dans les aciers bas carbone, 2014.

L. Germain, Apports des reconstructions des microtextures parentes dans l'étude des aciers et des alliages de titane», 2014.

S. Morito, A. H. Pham, and T. Hayashi, Ohba, «Block boundary analyses to identify martensite and bainite», International conference on martensitic transformations, ICOMAT-2014, pp.913-916

Z. Lawrynowicz, «Affect of decarburization times of bainitic ferrite laths on the microstructure in Fe-Cr-C steel», vol.6, pp.127-136, 2011.

B. Thomas and J. H. Schmitt, «Durcissement des aciers, rôle de ma microstructure»

H. K. Bhadeshia and . Bainite, IOM Communications Ldt, 2001.

F. G. Cabalero, M. J. Santofimia, C. Garcia-mateo, and C. Garcia-de-andrés, Temperature-Transformation Diagram within the bainitic temperature range in a medium carbon steel, Materials Transactions, vol.45, pp.3272-3281, 2004.

A. Constant, G. Henry, and . Charbonnier, Principes de base des traitements thermiques thermomécaniques et thermochimiques des aciers, 1992.

R. Lévêque,

C. Mesplont, «Phase transformations and microstructure-mechanical properties relations in complex phase high strength steels», 2002.

, NF EN ISO 10083-3, «Aciers pour trempe et revenu, pp.335-3931, 2006.

A. M. Llopsis, «Effect of alloying elements in steels on the kinetics of the austenite to bainite transformation», 1977.

V. D. Douglas, « Application of hardenability concepts in heat treatment of steel, J. Heat Treating, vol.1, issue.1, pp.5-30, 1979.

, ASTM A 255-07, «Standart test methods for determining hardenability of steel, 2007.

, IRSID, «Courbes de transformation des aciers de fabrication française», 1974.

V. Voort and G. F. , «Atlas of time-temperature diagrams for irons and steels», 1991.

, Ultra high strength fasteners with bainitic heat treatment for the automotive industry-property classes 14.8 to 16, VDA 235-205 Material Specification, vol.8, 2011.

U. Ultra, IFI (Industrial Fasteners Institute), pp.1416-2014, 2015.

N. F. En-iso, Matériaux métalliques-conversion des valeurs de dureté, pp.335-3931, 2004.

E. R. Parker, «Interelations of compositions, transformation kinetics, morphology, and mechanical properties of alloy steel», AIME meeting, 1977.

F. B. Pickering, Transformation and hardenability in steels, Climax molybdenum, pp.109-132, 1967.

K. Abbaszadeh and H. Saghafian, Kheirandish «Effect of bainite morphology on mechanical properties of the mixed bainite-martensite microstructure in D6AC steel», J. Mater. Sci. Technol, vol.28, issue.4, pp.336-342, 2012.

R. Chennarkesava, «Effets of holding temperature and time for austempering on impact toughness of medium carbon and high alloy steel», International Journal of Computer and security (IJCNS), vol.3, issue.1, pp.1-11, 2014.

J. M. Tartaglia, K. A. Lazzari, G. P. Hui, and K. L. Hayrynen, «A comparison of mechanical properties and hydrogen embrittlement resistance of austempered vs quenched and tempered 4340 steel», Metallurgical and materials transactions A, vol.39, pp.559-576, 2008.

M. Hajjaj, Propagation dynamique et arrêt de fissure de clivage dans un acier bainitique, 2006.

V. Smanio-renaud, Etude des mécanismes de fragilisation par l'hydrogène des aciers non alliés en milieu H2S humide: contribution de l'émission acoustique», 2008.

M. Oka and H. Okamoto, «Variation of transition temperatures from upper to lower bainites in plain carbon steels», Journal de physique IV, issue.C8, pp.8-503, 1995.

J. Thimont, «Développement d'un outil de calcul pour le refroidissement contrôlé de pièces d'acier, 2009.

P. Fisher and T. Diagrammes, ArcelorMittal Maizières Rapport interne, 2016.

A. Handbook, Metals Handbook, vol.4

P. Marier, Consortium de Recherche Forac, 2012.

T. Sourmail and C. Garcia-mateo, «Critical assesment of models for predicting the Ms Temperatures of steels », downloaded from www.thomas-sourmail

G. Murry and . Bainites, ATTT/AWT Journées franco-allemandes des 22 et 23 avril, 1999.

N. F. En-iso, Essai de trempabilité par trempe en bout (essai Jominy), vol.642, pp.335-3931, 1999.

J. Barralis and G. Maeder, Précis de métallurgie" Afnor Nathan, 3° édition, 1986.

G. Murry, «Aciers pour traitements thermiques, Mise en oeuvre», Techniques de l'ingénieur, p.453

J. Creus, C. Berziou, S. Cohendoz, A. Perez, C. Rébéré et al., « Reactivity classification in saline solution of magnetron sputtered or EBPVD pure metallic, nitride and Al-based alloy coatings, Surface and Coatings Technology, vol.47, pp.162-173, 2012.

A. Perez, A. Billard, C. Rébéré, C. Berziou, S. Touzain et al., «Influence of metallurgical states on the corrosion behavior of Al-Zn PVD coatings in saline solution», Corrosion Science, vol.74, p.240, 2013.

. .. 735°c, Evolution de l'allongement à rupture lors d'une traction étagée lente avec et sans hydrogène pour les 34CrNiMo6, 37MnB5, 50CrMo4 et 60Cr3 après un traitement de trempe suivie d'un revenu et après une trempe isotherme bainitique, Température de trempe isotherme bainitique et température de revenu pour les aciers 34CrNiMo6, 37MnB5, 50CrMo4 et 60Cr3, vol.32

.. .. Avec-opticompo, Optimisation de la composition chimique de la classe 14-8, vol.41

.. .. Avec-opticompo, Optimisation de la composition chimique de la classe 16-8, vol.42

. , 145 Tableau 44 : valeurs de potentiel et de courant de corrosion des différents témoins issus des mesures effectuées régulièrement dans le cadre de cette étude, notamment lors des changements d'électrolytes (solution saline aérée 30 g.l-1 NaCl), Composition chimique d'un acier satisfaisant aux classes de fixation 12-9, vol.43, pp.14-22