N. P. Padture, Thermal Barrier Coatings for Gas-Turbine Engine Applications, Science, vol.296, issue.5566, pp.280-284, 2002.
DOI : 10.1126/science.1068609

F. Mauget, D. Marchand, M. Morisset, D. Bertheau, J. Cormier et al., Nouveau moyen de caractérisation des matériaux, Mater. Tech, vol.100, issue.5, 2012.

F. Bourlier, Needs and specifications of thin TBCS, AAAF Coloqium, p.21, 2005.

R. Mévrel, Les systèmesbarrì eres thermiques pour aubes de turbine. PlstOx, pp.255-264, 2007.

R. B. Dinwiddie, C. Stephen, and W. D. Porter, The effect of themal aging on the thermal conductivity of aps and ebpvd tbc, Turbo Expo, vol.96, 1996.

A. Feuerstein, J. Knapp, T. Taylor, A. Ashary, A. Bolcavage et al., Technical and Economical Aspects of Current Thermal Barrier Coating Systems for Gas Turbine Engines by Thermal Spray and EBPVD: A, Review. Journal of Thermal Spray Technology, vol.17, issue.2, pp.199-213, 2008.

P. Fauchais, A. Vardelle, and B. Dussoubs, Quo Vadis Thermal Spray. ASM, vol.10, pp.44-66, 1999.

P. Fauchais, Understanding plasma spraying, Journal of Physics D: Applied Physics, vol.37, issue.9, pp.86-108, 2004.
DOI : 10.1088/0022-3727/37/9/r02

URL : https://hal.archives-ouvertes.fr/hal-00944489

P. Fauchais, M. Vardelle, A. Vardelle, L. Bianchi, and A. C. Leger, Parameters controlling the generation and properties of plasma sprayed zirconia coatings. Plasma chemistry and plasma processing, vol.16, pp.99-125, 1995.

J. M. Leger and F. Remy, Influence des gaz en projection plasma. Revue Surfaces, 1996.

M. Vardelle, A. Vardelle, A. Denoirjean, and P. Fauchais, Heat treatment of zirconia powders with different morphologies under thermal plasma conditions, MRS Proceedings, vol.190, p.175, 1990.

W. Ma and D. E. Mack, Perovskite-type strontium, zirconate as a new material for thermal barrier coatings, Journal of American Ceramic Society, vol.91, issue.8, p.187, 2008.

V. Debout, ContributionàContributionà l'´ etude des propriétés optiques de dépôts plasma de zircone yttriée : influences de leurs caractéristiques microstructurales et physicochimiques, 2007.

M. I. Boulos, P. Fauchais, and E. Pfender, Thermal Plasma Fundamentals and Application, vol.1, 1994.

D. Bathelier and V. Gourtaouen, Projection plasma avec mélange gazeux ternaire

P. Wang, S. C. Yu, and H. W. Ng, Particle velocities, sizes and flux distribution in plasma spray with two powder injection ports, Materials Science and Engineering: A, vol.383, issue.1, pp.122-136, 2004.

E. Pfender, Particle behavior in thermal plasmas. Plasma chemistry and plasma processing, vol.10, pp.167-194, 1989.

V. Renouard, Elaboration par projection plasma d'´ electrolytes de zircones yttriée denses et de faiblé epaisseur pour SOFC, 2004.

R. Bolot, M. Imbert, and C. Coddet, On the use of a low-Reynolds extension to the Chen-Kim model to predict thermal exchanges in the case of an impinging plasma jet, International journal of heat and mass transfer, vol.44, issue.6, pp.1095-1106, 2001.

S. Goutier, M. Vardelle, and P. Fauchais, Comparison between metallic and ceramic splats: Influence of viscosity and kinetic energy on the particle flattening, Surface and Coatings Technology, vol.235, pp.657-668, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00946532

K. Shinoda, J. Colmenares-angulo, A. Valarezo, and S. Sampath, Effect of Deposition Rate on the Stress Evolution of Plasma-Sprayed Yttria-Stabilized Zirconia, Journal of Thermal Spray Technology, vol.21, issue.6, pp.1224-1233, 2012.

X. Zhang, J. Gong, and S. Tu, Effect of spraying condition and material properties on the residual stress in plasma spraying, JOURNAL OF MATERIALS SCIENCE AND TECHNOLOGY-SHENYANG, vol.20, issue.2, pp.149-153, 2004.

C. Moreau, P. Gougeon, and M. Lamontagne, Influence of substrate preparation on the flattening and cooling of plasma-sprayed particles, Journal of Thermal Spray Technology, vol.4, issue.1, pp.25-33, 1995.

J. Cedelle, Etude de la formation de lamelles, 2005.

K. Fataoui, Développement de modèles thermomécaniques de construction de dépôts obtenus par projection thermique. Modèle mécano thermique de l'´ etalement de la gouttelette, 2007.

A. Vencl, Optimization of the deposition parametersof thick atmospheric plasma spray coatings. Balkantrib'11, pp.275-279, 2011.

A. A. Syed, A. Denoirjean, B. Hannoyer, P. Fauchais, P. Denoirjean et al., Influence of substrate surface conditions on the plasma sprayed ceramic and metallic particles flattening, Surface and Coatings Technology, vol.200, issue.7, pp.2317-2331, 2005.

S. Chandra and P. Fauchais, Formation of Solid Splats During Thermal Spray Deposition, Journal of Thermal Spray Technology, vol.18, issue.2, pp.148-180, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00393097

I. St-doltsinis, J. Harding, and M. Marchese, Modelling the production and performance analysis of plasma-sprayed ceramic thermal barrier coatings, Archives of Computational Methods in Engineering, vol.5, issue.2, pp.59-166, 1998.

A. M. Ahmed and R. H. Rangel, Metal droplet deposition on non-flat surfaces: effect of substrate morphology, vol.45, pp.1077-1091, 2002.

R. N. Wenzel, Resistance of Solid Sufaces to Wetting by Water. Industrial & Engineering Chemistry, vol.28, pp.988-994, 1936.

K. Bobzin, N. Bagcivan, D. Parkot, and I. Petkovi´cpetkovi´c, Simulation of PYSZ particle impact and solidification in atmospheric plasma spraying coating process, Surface and Coatings Technology, vol.204, issue.8, pp.1211-1215, 2010.

E. Nogues-delbos, Densification de dépôt de YSZpar plasma d'arc pour semiconducteurs, 2007.

T. Loulou, E. Artyukhin, and J. Bardon, Estimation of thermal contact resistance during the first stages of metal solidification process : Ii-experimental setup and results, International journal of heat and mass transfer, vol.42, issue.21, pp.2129-2142, 1999.

J. Patru, Modélisation du développement des contraintes résiduelles au sein de dépot plasma de Zircone et d'Acier, 2005.

A. Kulkarni, A. Vaidya, A. Goland, S. Sampath, and H. Herman, Processing effects on porosity-property correlations in plasma sprayed yttria-stabilized zirconia coatings, Materials Science and Engineering: A, vol.359, issue.1, pp.100-111, 2003.
DOI : 10.1016/s0921-5093(03)00342-3

F. Sarret, Simulation numérique de dépôts céramiques plasma, 2014.

M. Fukumoto, M. Nagai, and T. Yasui, Influence of surface character change of substrate due to heating on flattening behavior of thermal sprayed particles, Journal of Thermal Spray Technology, vol.15, issue.4, pp.759-764, 2006.

X. Jiang, Y. Wan, H. Herman, and S. Sampath, Role of condensates and adsorbates on substrate surface on fragmentation of impinging molten droplets during thermal spray, Thin Solid Films, vol.385, issue.1, pp.132-141, 2001.

M. Fukumoto, I. Ohgitani, and T. Yasui, Effect of substrate surface change on flattening behaviour of thermal sprayed particles, Materials transactions, vol.45, issue.6, pp.1869-1873, 2004.
DOI : 10.2320/matertrans.45.1869

URL : https://www.jstage.jst.go.jp/article/matertrans/45/6/45_6_1869/_pdf

A. C. Bianchi, M. Leger, P. Vardelle, and . Fauchais, Article-L.Bianchi-Splat formation and cooling of plasma sprayed zirconia.pdf, Thin Solid Films, vol.305, pp.35-47, 1997.

M. Fukumoto, T. Yamaguchi, M. Yamada, and T. Yasui, Splash Splat to Disk Splat Transition Behavior in Plasma-Sprayed Metallic Materials, vol.16, pp.905-912, 2007.
DOI : 10.1007/s11666-007-9083-y

S. Mihm, T. Duda, H. Gruner, G. Thomas, and B. Dzur, Method and Process Development of Advanced Atmospheric Plasma Spraying for Thermal Barrier Coatings, Journal of Thermal Spray Technology, vol.21, issue.3-4, pp.400-408, 2012.

A. Proner, Revêtements par projection thermique. Techniques de l'ingénieur, 1999.

S. Kuroda and T. W. Clyne, Quenching stress in thermally sprayed coatings, Thin Solid Films, vol.1, pp.49-66, 1991.
DOI : 10.1016/0040-6090(91)90029-w

L. Wang, Y. Wang, X. G. Sun, J. Q. He, Z. Y. Pan et al., Microstructure and indentation mechanical properties of plasma sprayed nano-bimodal and conventional ZrO2-8wt%Y2o3 thermal barrier coatings, Vacuum, vol.86, issue.8, pp.1174-1185, 2012.
DOI : 10.1016/j.vacuum.2011.10.029

D. Bouchard, F. G. Hamel, J. Nadeau, D. Simard, S. Bellemare et al., Effects of substrate surface conditions on heat transfer and shell morphology in the solidification of a copper alloy, Metallurgical and Materials Transactions B, vol.32, issue.1, pp.111-118, 2001.

T. W. Clyne and S. C. Gill, Residual stresses in thermal spray coatings and their effect on interfacial adhesion: a review of recent work, Journal of Thermal Spray Technology, vol.5, issue.4, pp.401-418, 1996.

F. Bahbou, P. Nylen, and S. Trollhattan, Relationship between surface topography parameters and adhesion strength for ps, 2005.

M. Wery and . Dégraissage, , 1998.

K. Tosha, J. Lu, B. Guelorget, and E. Nagashima, Shot Peening and Grit Blasting-effects on surface iontegrity, ABC, vol.9, issue.3, 2001.

L. Sluatineanu, M. Potarniche, I. Coteata, L. Grigoras, F. Gherman et al., Surface roughness at aluminium parts sand blasting, Proceedings in Manufacturing Systems, vol.6, 2011.

S. Kunaporn, M. Ramulu, M. Hashish, and J. Hopkins, Ultra High Pressure Waterjet Peening Part I: Surface Texture, Shot Peener, vol.20, issue.1, 2006.
DOI : 10.1115/1.1857934

S. Dong, B. Song, B. Hansz, H. Liao, and C. Coddet, Study on the Mechanism of Adhesion Improvement Using Dry-Ice Blasting for Plasma-Sprayed Al2o3 Coatings, Journal of Thermal Spray Technology, vol.22, issue.2-3, pp.213-220, 2012.

R. S. Paredes, S. C. Amico, and A. S. Oliveira, The effect of roughness and pre-heating of the substrate on the morphology of aluminium coatings deposited by thermal spraying, Surface and Coatings Technology, vol.200, issue.9, pp.3049-3055, 2006.

S. Costil, H. Liao, A. Gammoudi, and C. Coddet, Influence of Surface Laser Cleaning Combined with Substrate Preheating on the Splat Morphology, Journal of Thermal Spray Technology, vol.14, issue.1, pp.31-38, 2005.
DOI : 10.1361/10599630522657

R. Kromer, S. Costil, J. Cormier, D. Courapied, L. Berthe et al., Laser surface patterning to enhance adhesion of plasma sprayed coatings, Surface and Coatings Technology, vol.278, pp.171-182, 2015.
DOI : 10.1016/j.surfcoat.2015.07.022

P. Laurens and C. Dubouchet, Application des lasers aux traitements de surface, 2005.

P. Laurens, C. Dubouchet, and D. Kechemair, Application des lasers aux traitements de surface, p.1643, 1995.

C. W. Draper and P. Mazzodi, Laser Surface Treatment of Metals, Nato ASI Science, vol.115, 1986.

T. E. Itina, W. Marine, and M. Autric, Monte Carlo simulation of pulsed laser ablation into an ambient gas, Computational materials science, vol.10, issue.1, pp.144-147, 1998.
DOI : 10.1016/s0927-0256(97)00127-4

URL : https://hal.archives-ouvertes.fr/ujm-00378625

D. Sands, Pulsed laser heating and melting. Heat Conduction/Book, vol.2, 2011.
DOI : 10.5772/28736

URL : https://cdn.intechopen.com/pdfs/25478.pdf

C. Langlade, B. Vannes, and P. Sallamand, Laser de puissance et traitements superficiels. Techniques de l'ingénieur, M1642, 2002.

J. P. Nielsen, Short-pulse laser ablation of metals: Fundamentals and applications for micro-mechanical interlocking, 2010.

S. I. Anisimov, Vaporization of metal absorbing laser radiation, Soviet Physics JETP, vol.27, issue.1, pp.182-183, 1968.

M. Schneider, . Berthe, M. Fabbro, and . Muller, Measurement of laser absorptivity for operating parameters characteristic of laser drilling regime, Journal of Physics D: Applied Physics, vol.41, issue.15, p.155502, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00794960

C. L. Chan and J. Mazumber, 1d steady state model for damage by vaporization and liquid expulsion due to laser-material interaction, 1987.
DOI : 10.1063/1.339053

L. M. Cabalin and J. J. Laserna, Experimental determinaion of laser induced breakdown thresholds metals under nanosecond Q-switched laser operation, Spectrochimica Acta Part B: Atomic Spectroscopy, vol.53, pp.723-730, 1998.

A. Otto, H. Koch, K. Leitz, and M. Schmidt, Numerical simulations a versatile approach for better understanding dynamics in laser material processing, Physics Procedia, vol.12, issue.3, pp.11-20, 2011.
DOI : 10.1016/j.phpro.2011.03.003

URL : https://doi.org/10.1016/j.phpro.2011.03.003

F. Garrelie and A. Catherinot, Simulation Monte Carlo du transport d'un panache plasma créé par ablation laser, Le Journal de Physique IV, vol.9, issue.PR5, pp.5-135, 1999.
DOI : 10.1051/jp4:1999541

URL : http://jp4.journaldephysique.org/articles/jp4/pdf/1999/05/jp4199909PR541.pdf

V. Semak and A. Matsunawa, The role of recoil pressure in energy balance during laser materials processing, Journal of Physics D: Applied Physics, vol.30, issue.18, p.2541, 1997.

V. V. Semak, J. Hopkins, M. H. Mccay, and T. D. Mccay, A concept for a hydrodynamic model of keyhole formation, SPIE, vol.2500, p.64, 1994.

J. M. Jouvard, A. Soveja, and N. Pierron, Thermal modelling of metal surface texturing by pulsed laser, Proc. Comsol Multiphysics Conference, 2006.

K. Verhoeven, Modelling laser percussion drilling, 2004.

M. Medale, C. Xhaard, and R. Fabbro, A thermo-hydraulic numerical model to study spot laser welding, Comptes Rendus Mécanique, vol.335, issue.5-6, pp.280-286, 2007.
DOI : 10.1016/j.crme.2007.05.013

URL : https://hal.archives-ouvertes.fr/hal-01507584

N. Revuz, Etude de l'endommagement d'un superalliage monocristalinàmonocristalinà base de nickel induit par microperçage laser milliseconde, 2010.

S. Costil, A. Lamraoui, C. Langlade, O. Heintz, and R. Oltra, Surface modification induced by pulsed-laser texturing influence of laser impact on the surface properties, Applied Surface Science, vol.288, pp.542-549, 2014.

R. K. , S. Costil, J. Cormier, L. Berthe, P. Peyre et al., Laser Patterning Pretreatment before Thermal Spraying: A Technique to Adapt and Control the Surface Topography to Thermomechanical Loading and Materials, Journal of Thermal Spray Technology, vol.25, issue.3, pp.401-410, 2016.

V. V. Sobolev, J. M. Guilemany, and A. J. Martin, Influence of surface roughness on the flattening of powder particles during thermal spraying, Journal of Thermal Spray Technology, vol.5, issue.2, pp.207-214, 1996.

Z. Suo and J. W. Hutchinson, Interface crack between two elastic layers. Internation journal of fracture, vol.43, pp.1-18, 1990.
DOI : 10.1007/bf00018123

C. Moreau, P. Cielo, and M. Lamontagne, Flattening and solidification of thermally sprayed particles, Journal of Thermal Spray Technology, vol.1, issue.4, pp.317-323, 1992.
DOI : 10.1007/bf02647159

C. Li, C. Li, G. Yang, and Y. Wang, Examination of Substrate Surface MeltingInduced Splashing During Splat Formation in Plasma Spraying, Journal of Thermal Spray Technology, vol.15, issue.4, pp.717-724, 2006.
DOI : 10.1361/105996306x146947

A. G. Evans, B. J. Dalgleish, M. He, and J. W. Hutchinson, on crack path selection and the interface fracture energy in bimaterial sustems, Acta Materialia, vol.37, issue.12, pp.3249-3254, 1989.
DOI : 10.1016/0001-6160(89)90197-1

J. W. Hutchinson and Z. Suo, Mixed mode cracking in layered materials, Advanced in applied mechanics, vol.29, pp.64-163, 1992.
DOI : 10.1016/s0065-2156(08)70164-9

J. S. Wang, Interfacial fracture toughness of a copper/alumina system and the effect of the loading phase angle, Mechanics of Materials, vol.20, pp.251-259, 1995.

J. Laurencin, Amorçage et propagation d'une fissurè a l'interface d'un bi-matériau, 2002.

C. C. Berndt, Tensile Adhesion Testing Methodology for Thermally Sprayed Coatings, Journal Material Engineeing, vol.12, pp.151-158, 1990.
DOI : 10.1007/bf02834068

U. Soltezc, E. Baudendistel, and R. Schafer, Stress analyses of Pull-off tests for strength measurements of coating. Bioceramics and the Human body, pp.504-509, 1992.

J. R. Vaunois, Modélisation de la durée de vie desbarrì eres thermiques, par le développement et l'exploitation d'essais d'adhérence, 2013.

B. S. Schorr, K. J. Stein, and A. R. Marder, Characterization of thermal spray coatings, Materials characterization, vol.42, issue.2, pp.93-100, 1999.
DOI : 10.1016/s1044-5803(98)00048-5

J. Takadoum and H. H. Bennani, Influence of substrate roughness and coating thickness on adhesion, friction and wear of TiN films, Surface and Coatings Technology, vol.96, issue.2-3, pp.272-282, 1997.
DOI : 10.1016/s0257-8972(97)00182-5

M. Dupeux, Mesure desénergiesdesénergies de rupture interfaciale : problématique et exemples de résultats d'essais de gonflement-décollement, Mécanique et Industrie, vol.5, issue.4, pp.441-450, 2004.
DOI : 10.1051/meca:2004044

D. C. Agrawal and R. Raj, Measurement of the ultimate shear strength of a metalceramic interface, Acta metall, vol.37, issue.4, pp.1265-1270, 1988.

G. Marot, P. H. Demarecaux, J. Lesage, M. Hadad, S. Siegmann et al., The interfacial indentation test to determine adhesion and residual stresses in NiCr VPS coatings, Surface and Coatings Technology, vol.202, issue.18, pp.4411-4416, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00288576

P. H. Demarecaux, D. Chicot, and J. Lesage, Interface indentation test for the determination of adhesive properties of thermal sprayed coatings, Journal of materials science letters, vol.15, issue.16, pp.1377-1380, 1996.

P. F. Zhao, C. A. Sun, X. Y. Zhu, F. L. Shang, and C. J. Li, Fracture toughness measurements of plasma-sprayed thermal barrier coatings using a modified four-point bending method, Surface and Coatings Technology, vol.204, issue.24, pp.4066-4074, 0193.

H. G. Tattersall, The ultrasonic pulse-echo technique as applied to adhesion testing, Journal of Physics D: Applied Physics, vol.6, pp.819-832, 1973.

P. Peyre and R. Fabbro, Laser shock processing: a review of the physics and applications. Optical and quantum electronics, vol.27, pp.1213-1229, 1995.

S. Barradas, M. Jeandin, C. Bolis, L. Berthe, M. Arrigoni et al., Study of adhesion of PROTAL® copper coating of Al 2017 using the laser shock adhesion test (LASAT), Journal of materials science, vol.39, issue.8, pp.2707-2716, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00163090

Y. Ichikawa, S. Barradas, F. Borit, V. Guipont, M. Jeandin et al., Evaluation of adhesive strength of thermal-sprayed Hydroxyapatite coatings using the LAser Shock Adhesion Test (LASAT), Materials Transactions, vol.48, issue.4, pp.793-798, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00165814

L. Berthe, M. Arrigoni, M. Boustie, J. Cuq-lelandais, C. Broussillou et al., State-of-the-art laser adhesion test (LASAT), iFirst, pp.1-15, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00652904

M. Arrigoni, Etude de l'influence des rugosités d'interface de porosités et de l'´ epaisseur d'´ echantillon sur la propagation des chocs laser dans des systèmes revetus, 2004.

C. Bolis, Etude numérique et expérimentale de la séparation par chocs brefs d'interface de revêtements multi-couches : application au test d'adhérence par chocs laser, 2004.

R. David, S. R. Clarke, and . Phillpot, Thermal barrier coating materials. Materials Today, vol.8, pp.22-29, 2005.

R. Vaßen, M. Jarligo, T. Steinke, D. Mack, and D. Stöver, Overview on advanced thermal barrier coatings, Surface and Coatings Technology, vol.205, issue.4, pp.938-942, 2010.

G. , Thermal barrier coatings: characteristics of microstructure and properties, generation and directions of development of bond, Journal of Achievements in Materials and Manufacturing Engineering, vol.37, issue.2, pp.323-331, 2009.

D. Stoever and C. Funke, Directions of the thermal barrier coatings in energy applications. Materials processing technology, pp.195-202, 1999.

J. Kwon, J. Lee, Y. Jung, and U. Paik, Effect of bond coat nature and thickness on mechanical characteristic and contact damage of zirconia-based thermal barrier coatings, Surface and Coatings Technology, vol.201, issue.6, pp.3483-3490, 2006.

P. Théry, Adhérence de barrieres thermiques pour aube de turbine avec couche de liaison beta-(Ni, Pt) Al ou beta-NiAl (Zr), 2007.

J. H. Wood, E. H. Goldman, I. I. Superalloys, C. T. Sims, ;. Lughi et al., High temperature aging of YSZ coatings and subsequent transformation at low temperature, Surface and Coatings Technology, vol.200, issue.56, pp.1287-1291, 1997.

A. H. Heuer, R. Chaim, and V. Lanteri, Review: phase transformations and microstructural characterization of alloys in the system YZO3-ZrO2, Science and Technology III, vol.24, pp.3-20, 1988.

P. G. Klemens and M. Gell, Thermal conductivity of thermal barrier coatings, Materials Science and Engineering: A, vol.245, issue.2, pp.143-149, 1998.

R. Dutton, R. Wheeler, K. S. Ravichandran, and K. An, Effect of heat treatment on the thermal conductivity of plasma-sprayed thermal barrier coatings, Journal of thermal spray technology, vol.9, issue.2, pp.204-209, 2000.

J. A. Haynes, E. D. Rigney, K. Mattison, W. D. Ferber, and . Porter, Oxidation and degradation of a plasma-sprayed thermal barrier coating system, Surface and Coatings Technology, vol.86, pp.102-108, 1996.

A. Peichl, T. Beck, and O. Vohringer, Behaviour of an EBPVD tbc under thermal mechanical fatigue loading, Surface and Coatings Technology, issue.162, pp.113-118, 2003.

A. J. Slifka, B. J. Filla, J. M. Phelps, G. Bancke, and C. C. Berndt, Thermal conductivity of a zirconia thermal barrier coating, Journal of thermal spray technology, vol.7, issue.1, pp.43-46, 1998.

D. D. Hass, Thermal barrier coatings via directed vapor deposition, 2000.

A. Bacciochini, G. Montavon, J. Ilavsky, A. Denoirjean, and P. Fauchais, Porous Architecture of SPS Thick YSZ Coatings Structured at the Nanometer Scale (?50 nm), Journal of Thermal Spray Technology, vol.19, issue.1-2, pp.198-206, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00451160

H. Kassner, R. Siegert, D. Hathiramani, R. Vassen, and D. Stoever, Application of Suspension Plasma Spraying (SPS) for Manufacture of Ceramic Coatings, Journal of Thermal Spray Technology, vol.17, issue.1, pp.115-123, 2008.

M. Goral, S. Kotowski, and A. Nowotnik, PS-PVD deposition of thermal barrier coatings, Maciej Pytel, Marcin Drajewicz, and Jan Sieniawski, vol.237, pp.51-55, 2013.

M. Gupta, K. Skogsberg, and P. Nylén, Influence of Topcoat-Bondcoat Interface Roughness on Stresses and Lifetime in Thermal Barrier Coatings, Journal of Thermal Spray Technology, 2013.

R. L. Kang-yuan, X. Peng, S. Li, Y. Johansson, and . Wang, Some aspects of elemental behaviour in HVOF MCrAlY coatings in high-temperature oxidation, Surface and Coatings Technology, vol.261, pp.86-101, 2015.

S. Dryepondt, Comportement et endommagement en fluagè a haute température de parois minces en superalliage monocristallin MC2 : Effets de l'oxydation et de l'application d'un revêtement MCrAlY, 2004.

J. Angenete, K. Stiller, and V. Langer, Oxidation of simple and Pt-modified aluminide diffusion coatings on Ni-base superalloys-I. Oxide scale microstructure, Oxidation of Metals, vol.60, issue.1-2, pp.47-82, 2003.

R. Daniel and J. , The effect of bond coat oxidation on the microstructure and endurance of two thermal barrier coating systems, 2010.

P. Audigié, S. Selezneff, A. Rouaix-vande-put, C. Estournès, S. Hamadi et al., Cyclic Oxidation Behavior of TBC Systems with a Pt-Rich gamma-Ni+gamma prime-Ni3al Bond-Coating Made by SPS. Oxidation of Metals, vol.81, pp.33-45, 2014.

C. Duhamel, M. Chieux, R. Molins, L. Rémy, D. Monceau et al., Thermal cycling behaviour of thermal barrier coating systems based on first-and fourthgeneration Ni-based superalloys, Materials at High Temperatures, vol.29, issue.2, pp.136-144, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00726001

F. Wu, E. H. Jordan, X. Ma, and M. Gell, Thermally grown oxide growth behavior and spallation lives of solution precursor plasma spray thermal barrier coatings, Surface and Coatings Technology, vol.202, issue.9, pp.1628-1635, 2008.

M. W. Brumm and H. J. Grabke, The oxidation behaviour of NiAl-I. Phase transformations in the alumina scale during oxidation of NiAl and NiAl-Cr alloys, Corrosion science, vol.33, issue.11, pp.1677-1690, 1992.

V. K. Tolpygo and D. R. Clarke, Microstructural Study of the Thet a-Alpha Transformation in Alumina Scales Formed on Nickel-Aluminides. Material at high temperature, vol.17, pp.59-70, 2000.

A. Gil, V. Shemet, R. Vassen, M. Subanovic, J. Toscano et al., Effect of surface condition on the oxidation behaviour of MCrAlY coatings, Surface and Coatings Technology, vol.201, issue.7, pp.3824-3828, 2006.

P. Ptacek, Processes during Thermal Treatment, Strontium Aluminate-Cement Fundamentals, Manufacturing, Hydration, Setting Behaviour and Applications, 2014.

A. Gaubert, Modelisation des effets de l'´ evolution microstructurale sur le comportement mécaniqe du superalliage monocristalin AM1, 2009.

P. Caron, C. Ramusat, and F. Diologent, Influence of the g' fraction on the g/g'topological inversion during high temperature creep of single crystal superalloys, pp.159-167, 2008.

A. Raffaitin, D. Monceau, F. Crabos, and E. Andrieu, The effect of thermal cycling on the high-temperature creep behaviour of a single crystal nickel-based superalloy, Scripta Materialia, vol.56, issue.4, pp.277-280, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00474877

J. Cormier, Comportement en fluage anisothermè a haute et très haute température du superalliage monocristallin MC2, 2006.

L. Dirand, J. Cormier, A. Jacques, J. Chateau-cornu, T. Schenk et al., Measurement of the effective gamma/gamma prime lattice mismatch during high temperature creep of Ni-based single crystal superalloy, Materials Characterization, vol.77, pp.32-46, 2013.

. Vidal-sétif, Rapport de synthèse sur le retour d'expérience en service. rappo rt technique interne ONERA, 2010.

R. Vassen, F. Cernuschi, G. Rizzi, A. Scrivani, N. Markocsan et al., Recent Activities in the Field of Thermal Barrier Coatings Including Burner Rig Testing in the European Union, Advanced Engineering Materials, vol.10, issue.10, pp.907-921, 2008.

C. G. Levi, J. W. Hutchinson, M. Vidal-sétif, and C. A. Johnson, Environmental degradation of thermal-barrier coatings by molten deposits, MRS Bulletin, vol.37, issue.10, pp.932-941, 2012.

X. Chen, . Wang, A. Yao, J. Evans, R. Hutchinson et al., Foreign object damage in a thermal barrier system: mechanisms and simulations, Materials Science and Engineering: A, vol.352, issue.1-2, pp.221-231, 2003.

N. Vidal-sétif, S. Chellah, C. Rio, O. Sanchez, and . Lavigne, Calcium-magnesium-alumino-silicate (CMAS) degradation of EB-PVD thermal barrier coatings: characterization of CMAS damage on ex-service high pressure blade TBCs, Surface and Coatings Technology, vol.208, pp.39-45, 2012.

S. A. Tsipas, I. O. Golosnoy, R. Damani, and T. W. Clyne, The Effect of a High Thermal Gradient on Sintering and Stiffening in the Top Coat of a Thermal Barrier Coating System, Journal of Thermal Spray Technology, vol.13, issue.3, pp.370-376, 2004.

F. Tang and J. M. Schoenung, Evolution of Young's modulus of air plasma sprayed yttria-stabilized zirconia in thermally cycled thermal barrier coatings. Scripta Materialia, vol.54, pp.1587-1592, 2006.

X. L. Fan, W. X. Zhang, T. J. Wang, and Q. Sun, The effect of thermally grown oxide on multiple surface cracking in air plasma sprayed thermal barrier coating system, Surface and Coatings Technology, vol.208, pp.7-13, 0197.

A. Nusair-khan and J. Lu, Behavior of aps subject to inthense thermal cycling, Surface and Coatings Technology, issue.166, pp.37-43, 2003.

A. Moridi, M. Azadi, and G. H. Farrahi, Thermo-mechanical stress analysis of thermal barrier coating system considering thickness and roughness effects, Surface and Coatings Technology, 2012.

H. E. Evans, Oxidation failure of TBC systems: An assessment of mechanisms, Surface and Coatings Technology, vol.206, issue.7, pp.1512-1521, 2011.

D. R. Clarke, M. Oechsner, and N. P. Padture, Thermal barrier coatings for more efficient gas turbine engines, MRS bulletin, vol.37, issue.10, 2012.

A. Murad-bickard, Endommagement sous sollicitations thermiques et mécaniques d'un aluminiure de nickel et d'unebarrì ere thermique déposés sur un superalliage monocristallin, 1998.

C. Giolli, A. Scrivani, G. Rizzi, F. Borgioli, G. Bolelli et al., Failure Mechanism for Thermal Fatigue of Thermal Barrier Coating Systems, Journal of Thermal Spray Technology, vol.18, issue.2, pp.223-230, 2009.

R. Eriksson, High-temperature degradation of plasma sprayed thermal barrier coating systems, 2011.

A. R. Nicoll and G. Wahl, Oxidation and high temperature corrosion behaviour of modified MCrAlY cast materials. Superalloys, pp.805-813, 1984.

O. Trunova, T. Beck, R. Herzog, R. W. Steinbrech, and L. Singheiser, Damage mechanisms and lifetime behavior of plasma sprayed thermal barrier coating systems for gas turbines-Part I: Experiments, Surface and Coatings Technology, vol.202, issue.20, pp.5027-5032, 2008.

A. Rabiei and A. G. Evans, Failure mechanisms associated with the tgo in aps tbc, Acta Materialia, issue.48, pp.3963-3976, 2000.

N. Birks, G. H. Meier, and F. S. Pettit, Introduction to the High-Temperature Oxidation of Metals, 2006.

B. A. Pint, M. Treska, and L. W. Hobbs, The effect of various oxide dispersions on the phase composition and morphology of Al2o3 scales grown on beta-NiAl, Oxidation of Metals, vol.47, issue.1-2, pp.1-20, 1997.

M. Harvey, C. Courcier, V. Maurel, and L. Rémy, Oxide and TBC spallation in betaNiAl coated systems under mechanical loading, Surface and Coatings Technology, vol.203, issue.5-7, pp.432-436, 2008.

M. Beck, L. Schweda, and . Singheizer, Influence of interface roughness, substrate and oxide creep on damage evolution and lifetime aps based tbc, Procedia Engineering, issue.55, pp.191-198, 2013.

J. Rösler, M. Bäker, and M. Volgmann, Stress state and failure mechanisms of thermal barrier coatings: role of creep in thermally grown oxide, Acta materialia, vol.49, issue.18, pp.3659-3670, 2001.

D. Jun, H. Xia, C. Song, and Y. , Numerical Simulation Procedure for Modeling TGO Crack Propagation and TGO Growth in Thermal Barrier Coatings upon Thermal-Mechanical Cycling, Advances in Materials Science and Engineering, pp.1-14, 2014.

Z. Lu, . Sang-won, Y. Myoung, G. Jung, J. Balakrishnan et al., Thermal Fatigue Behavior of Air-Plasma Sprayed Thermal Barrier Coating with Bond Coat Species in Cyclic Thermal Exposure, Materials, vol.6, issue.8, pp.3387-3403, 2013.

D. Liu, M. Seraffon, P. E. Flewitt, N. J. Simms, J. R. Nicholls et al., Effect of substrate curvature on residual stresses and failure modes of an air plasma sprayed thermal barrier coating system, Journal of the European Ceramic Society, vol.33, pp.3345-3357, 2013.

H. Zhao, Z. Yu, and H. N. Wadley, The influence of coating compliance on the delamination of thermal barrier coatings, Surface and Coatings Technology, vol.204, issue.15, pp.2432-2441, 2010.

M. L. Glynn, M. W. Chen, K. T. Ramesh, and K. J. Hemker, The influence of a martensitic phase transformation on stress development in thermal barrier coating systems, Metallurgical and Materials Transactions A, vol.35, issue.8, pp.2279-2286, 2004.

J. Shi, A. M. Karlsson, B. Baufeld, and M. Bartsch, Evolution of surface morphology of thermo-mechanically cycled NiCoCrAlY bond coats, Materials Science and Engineering: A, vol.434, issue.1-2, pp.39-52, 2006.

M. Chen, M. Glynn, R. Ott, T. Hufnagel, and K. Hemker, Characterization and modeling of a martensitic transformation in a platinum modified diffusion aluminide bond coat for thermal barrier coatings, Acta Materialia, vol.51, issue.14, pp.4279-4294, 2003.

D. Balint and . Hutchinson, An analytical model of rumpling in thermal barrier coatings, Journal of the Mechanics and Physics of Solids, vol.53, issue.4, pp.949-973, 2005.

E. Cavaletti, Etude et développement debarrì ere de diffusion pour les sous-couches de systèmebarrì ere thermique, 2009.

O. Lavigne, C. Ramusat, S. Drawin, P. Caron, D. Boivin et al., Relationships between microstructural instabilities and mechanical behavior in new generation nickel-based single crystal superalloys, Superalloys, vol.2, pp.667-675, 2004.

A. G. Evans, D. R. Mumm, J. W. Hutchinson, G. H. Meier, and F. S. Pettit, Mechanisms controlling the durability of thermal barrier coatings. Progress in materials science, vol.46, pp.505-553, 2001.

F. Riaillant, J. Cormier, A. Longuer, X. Milhet, and J. Mendez, High-Temperature creep degradation of the AM1/NiAlPt/EBPVD YSZ system, Metallurgical and Materials Transactions A, vol.45, pp.351-359, 2014.

F. Mauget, F. Hamon, M. Morisset, J. Cormier, F. Riallant et al., Damage mechanisms in an EB-PVD thermal barrier coating system during TMF and TGMF testing conditions under combustion environment, International Journal of Fatigue, 2016.
DOI : 10.1016/j.ijfatigue.2016.08.001

E. Tzimas, H. Müllejans, S. D. Peteves, J. Bressers, and W. Stamm, Failure of thermal barrier coating systems under cyclic thermomechanical loading. Acta materialia, vol.48, pp.4699-4707, 2000.
DOI : 10.1016/s1359-6454(00)00260-3

R. Giraud, Z. Hervier, J. Cormier, G. Saint-martin, F. Hamon et al., Strain Effect on the gamma prime Dissolution at High Temperatures of a Nickel-Based Single Crystal Superalloy, Metallurgical and Materials Transactions A, vol.44, issue.1, pp.131-146, 2013.

S. Steuer, P. Villechaise, T. M. Pollock, and J. Cormier, Benefits of high gradient solidification for creep and low cycle fatigue of AM1 single crystal superalloy, Materials Science and Engineering: A, vol.645, pp.109-115, 2015.

M. Bensch, C. H. Konrad, E. Fleischmann, C. M. Rae, and U. Glatzel, Influence of oxidation on near-surface gamma prime fraction and resulting creep behaviour of single crystal Ni-base superalloy M247lc SX, Materials Science and Engineering: A, vol.577, pp.179-188, 2013.

P. Caron, C. Ramusat, and F. Diologent, Influence of the gamma prime fraction on the gamma/gamma prime topological inversion during high temperature creep of single crystal superalloys, pp.159-167, 2008.

E. Fleury, Endommagement du superalliage monocristallin AM1 en fatigue isotherme et anisotherme, 1991.

B. Zhang, X. Lu, D. Liu, and C. Tao, Influence of recrystallization on high-temperature stress rupture property and fracture behavior of single crystal superalloy, Materials Science and Engineering: A, vol.551, pp.149-153, 2012.

E. S. Gadelmawla, M. M. Koura, T. M. Maksoud, I. M. Elewa, and H. H. Soliman, Roughness parameters. Materials processing technology, vol.123, pp.133-145, 2002.

B. D. Hosterman, Raman spectroscopic study of solid solution spinel oxides, 2011.

W. C. Oliver and G. M. Pharr, Improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, Mater. Res, vol.7, pp.1564-1583, 1992.
DOI : 10.1557/jmr.1992.1564

URL : https://hal.archives-ouvertes.fr/hal-01518596

M. Schneider, M. Muller, R. Fabbro, and L. Berthe, Study of hole properties in percussion regime with a new analysis method. Laser Micro/Nanoeng, vol.2, pp.128-160, 2007.

B. Narendra and . Dahotre, Integrated computational and experimental approach to control physical texture during laser machining of structural ceramics, 2013.

H. Biermann, U. Tetzlaff, H. Mughrabi, B. Grossmann, S. Mechsner et al., Investigations on the orgin and effect of anomalous rafting. Superalloys, pp.525-535, 2000.
DOI : 10.7449/2000/superalloys_2000_525_534

URL : https://doi.org/10.7449/2000/superalloys_2000_525_534

D. Texier, Mesure etévolutiondesetévolutiondes gradients de propriétés mécaniques dans le système superlalliage, 2013.

Y. Wu, R. Yang, S. Li, Y. Ma, S. Gong et al., Surface recrystallization of a Ni3al based single crystal superalloy at different annealing temperature and blasting pressure, Rare Metals, vol.31, issue.3, pp.209-214, 2012.
DOI : 10.1007/s12598-012-0493-8

J. Meng, T. Jin, X. Sun, and Z. Hu, Effect of surface recrystallization on the creep rupture properties of a nickel-base single crystal superalloy, Materials Science and Engineering: A, vol.527, issue.23, pp.6119-6122, 2010.

R. T. Wu, K. Kawagishi, H. Harada, and R. C. Reed, The retention of thermal barrier coating systems on single-crystal superalloys: Effects of substrate composition, Acta Materialia, vol.56, issue.14, pp.3622-3629, 2008.

R. K. Ganesh, A. Faghri, and Y. Hahn, A generalized thermal modeling for laser drilling process-I. Mathematical modeling and numerical methodology. International journal of heat and mass transfer, vol.40, pp.3351-3360, 1997.
DOI : 10.1016/s0017-9310(96)00369-9

J. Girardot, P. Lorong, L. Illoul, N. Ranc, M. Schneider et al., Modeling laser drilling in percussion regime using constraint natural element method, International Journal of Material Forming, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01285198

H. A. Adrian and . Lutey, An improved model for nanosecond pulsed laser ablation of metals, Journal of Applied Physics, vol.114, issue.8, p.83108, 2013.

D. Autrique, Z. Chen, V. Alexiades, A. Bogaerts, B. Rethfeld et al., A multiphase model for pulsed ns-laser ablation of copper in an ambient gas, AIP Conference Proceedings-American Institute of Physics, vol.1464, p.648, 0201.

A. Soveja, J. M. Jouvard, and D. Grevey, Metal surface laser texturing: multiphysics modelling of a single impact effect, Excerpt from the Proceedings of the COMSOL Users Conference, 2007.

R. Kelly and R. W. Dreyfus, On the effect of knudsen layer formation on studies of vaporization, sputtering and desorption, Surface Science, vol.198, pp.263-276, 1988.

A. Miotello, A. Peterlongo, and R. Kelly, Laser-pulse sputtering of aluminium gasdynamic effects with recondensation and reflection conditions at the knudsen layer, 1995.

R. Wester, Laser-induced Vaporization, pp.93-111, 2011.

L. Rougier and ;. Lausanne, Simulation de la Formation des microstructures dans les SuperalliagesàSuperalliagesà Base de Nickel de Type AM1 durant la Solidification et les Traitements Thermiques, 2013.

J. Y. Hwang, S. Nag, A. R. Singh, R. Srinavasan, J. Tiley et al., Compositional Variations between Different Generations of gamma prime Precipitates Forming during Continuous Cooling of a Commercial Nickel-Base Superalloy, Metallurgical and Materials Transactions A, vol.40, pp.3059-3075, 2009.

M. Vardelle, A. Vardelle, A. C. Leger, P. Fauchais, and D. Gobin, Influence of particle parameters at impact on splat formation and solidification in plasma spraying processes, Journal of Thermal Spray Technology, vol.4, issue.1, pp.50-58, 1995.

M. Ivosevic, V. Gupta, R. A. Cairncross, T. E. Twardowski, R. Knight et al., Effect of Substrate Roughness on Splatting Behavior of HVOF

D. Garcia-alonso, N. Serres, C. Demian, S. Costil, C. Langlade et al., Pre/During-/Post-Laser Processes to Enhance the Adhesion and Mechanical Properties of Thermal-Sprayed Coatings with a Reduced Environmental Impact, Journal of Thermal Spray Technology, vol.20, issue.4, pp.719-735, 2011.

M. He and J. W. Hutchinson, Kinking of a crack out of an interface, Journal of Applied Mechanics, vol.56, pp.270-278, 1989.

S. Barradas, R. Molins, M. Jeandin, M. Arrigoni, M. Boustie et al., Application of laser shock adhesion testing to the study of the interlamellar strength and coating-substrate adhesion in cold-sprayed copper coating of aluminum, Surface and Coatings Technology, vol.197, issue.1, pp.18-27, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00153290

T. Antoun, L. Seaman, D. R. Curran, G. I. Kanel, S. Razorenov et al., Spall fracture, vol.1, 2003.

S. Barradas, Etude d'adhérence avec choc laser, 2004.

J. Ang, A. Sato, K. Kawagishi, and H. Harada, The Oxidation Characteristics of the. GAMMA.-. GAMMA.'Tie-Line Alloys of a Nickel-Base Superalloy, Materials transactions, vol.47, issue.2, pp.291-294, 2006.

E. N. Fedorova, D. Monceau, D. Oquab, and S. A. Khudonogov, High-temperature oxidation of nickel-based alloys and estimation of the adhesion strength of resulting oxide layers. Protection of Metals and Physical Chemistry of Surfaces, vol.47, pp.347-353, 2011.

H. Echsler, V. Shemet, M. Schütze, L. Singheiser, and W. J. Quadakkers, Cracking in and around the thermally grown oxide in thermal barrier coatings: A comparison of isothermal and cyclic oxidation, Journal of Materials Science, vol.41, issue.4, pp.1047-1058, 2006.

W. R. Chen, X. Wu, and D. Dudzinski, Influence of Thermal Cycle Frequency on the TGO Growth and Cracking Behaviors of an APS-TBC, Journal of Thermal Spray Technology, vol.21, issue.6, pp.1294-1299, 2012.

E. N. Fedorova, D. Monceau, and D. Oquab, Quantification of growth kinetics and adherence of oxide scales formed on Ni-based superalloys at high temperature, Corrosion Science, vol.52, issue.12, pp.3932-3942, 2010.

D. U. Furrer and H. J. Fecht, gamma prime formation un superalloy U720li, Scripta Materialia, vol.40, issue.11, pp.1215-1220, 1999.
DOI : 10.1016/s1359-6462(99)00094-9

D. Autrique, V. Alexiades, and H. Khanal, Hydrodynamic modeling of ns-laser ablation, In Electronic Journal of Differential equations, vol.20, pp.1-14, 2013.

R. Knight, Theoretical modelling of rapid surface vaporization with back pressure, AIAA J, vol.17, pp.519-523, 1979.

Y. L. Chen, J. W. Lewis, and C. Parigger, Spatial and temporal profiles of pulsed laser-induced air plasma emissions, Journal of quantitative spectroscopy and radiative tranfer, vol.67, pp.91-103, 2000.
DOI : 10.1016/s0022-4073(99)00196-x

M. Ranjbar-far, Simulation numérique du comportement thermomécanique de systemes multicouche-cas tbc, p.203, 2010.

, Annexes