L. Pawlowski, The science and engineering of thermal spray coatings, 2008.

V. Champagne and D. Helfritch, Critical Assessment 11: Structural repairs by cold spray, Mater Sci Technol, vol.31, issue.6, pp.627-634, 2015.

A. Moridi, S. H. Gangaraj, S. Vezzu, and M. Guagliano, Number of passes and thickness effect on mechanical characteristics of cold spray coating, Procedia Engineering, vol.74, pp.449-459, 2014.

N. Bala, H. Singh, J. Karthikeyan, and S. Prakash, Cold spray coating process for corrosion protection: a review, Surf Eng, vol.30, issue.6, pp.414-421, 2014.

S. Yin, M. Meyer, W. Li, H. Liao, and R. Lupoi, Gas Flow, Particle Acceleration, and Heat Transfer in Cold Spray: A review, J Therm Spray Technol, vol.25, issue.5, pp.1-23, 2016.

V. K. Champagne, The repair of magnesium rotorcraft components by cold spray, Journal of Failure Analysis and Prevention, vol.8, issue.2, pp.164-175, 2008.

M. Faccoli, G. Cornacchia, D. Maestrini, G. P. Marconi, and R. Roberti, Cold Spray Repair of Martensitic Stainless Steel Components, J Therm Spray Technol, issue.23, pp.1270-1280, 2014.

D. Harvey and T. Marrocco, The Potential of the Cold Spray Process for the Repair and Manufacture of Aluminium Alloy Parts, Proceedings of the 13th International Conference on Aluminum Alloys (Icaa13), pp.257-263, 2012.

Z. Cai, S. Deng, H. Liao, C. Zeng, and G. Montavon, The Effect of Spray Distance and Scanning Step on the Coating Thickness Uniformity in Cold Spray Process, J Therm Spray Technol, vol.23, issue.3, pp.354-362, 2014.

D. Fang, S. Deng, H. Liao, and C. Coddet, The effect of robot kinematics on the coating thickness uniformity, J Therm Spray Technol, vol.19, issue.4, pp.796-804, 2010.

V. K. Champagne and D. J. Helfritch, Mainstreaming cold spray-push for applications, Surf Eng, vol.30, issue.6, 2014.

R. G. Maev and V. Leshchynsky, Introduction to low pressure gas dynamic spray: physics and technology, 2009.

O. Stier, Fundamental Cost Analysis of Cold Spray, J Therm Spray Technol, vol.23, issue.12, pp.131-139, 2014.

J. Pattison, S. Celotto, R. Morgan, M. Bray, and W. O'neill, Cold gas dynamic manufacturing: A non-thermal approach to freeform fabrication, Int J Mach Tool Manu, vol.47, issue.3-4, pp.627-634, 2007.

, Chapter 2: Trajectory generation by offline programming technology

R. L. Williamson, J. R. Fincke, and C. H. Chang, Numerical study of the relative importance of turbulence, particle size and density, and injection parameters on particle behavior during thermal plasma spraying, J Therm Spray Technol, vol.11, issue.1, pp.107-118, 2002.

J. Disam, K. Lubbers, U. Neudert, and A. Sickinger, Effect of Spraying Parameters of the LPPS Method on the Structure of Ceramic Coatings, Thermal Spray Coatings: Research, Design and Applications, pp.487-491, 1993.

A. Arcondeguy, A. Grimaud, A. Denoirjean, G. Gasgnier, C. Huguet et al., Flame-sprayed glaze coatings: effects of operating parameters and feedstock characteristics onto coating structures, J Therm Spray Technol, vol.16, issue.56, pp.978-990, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00203147

A. Kout and H. Müller, Parameter optimization for spray coating, Adv Eng Softw, vol.40, issue.10, pp.1078-1086, 2009.

M. Fasching, F. Prinz, and L. Weiss, Planning robotic trajectories for thermal spray shape deposition, J Therm Spray Technol, vol.2, issue.1, pp.45-57, 1993.

F. Trifa, G. Montavon, and C. Coddet, On the relationships between the geometric processing parameters of APS and the Al 2 O 3-TiO 2 deposit shapes, Surface and Coatings Technology, vol.195, issue.1, pp.54-69, 2005.

S. Guessasma, M. Bounazef, and P. Nardin, Neural computation analysis of aluminatitania wear resistance coating, International Journal of Refractory Metals and Hard, vol.11
DOI : 10.1016/j.ijrmhm.2005.05.012
URL : https://hal.archives-ouvertes.fr/hal-00159354

X. Luo, Y. Li, C. Li, G. Yang, and C. Li, Effect of spray conditions on deposition behavior and microstructure of cold sprayed Ni coatings sprayed with a porous electrolytic Ni powder, Surf Coat Technol, vol.289, pp.85-93, 2016.

W. Wong, A. Rezaeian, E. Irissou, J. G. Legoux, and S. Yue, Cold spray characteristics of commercially pure Ti and Ti-6Al-4V, Advanced Materials Research, pp.639-644, 2010.

S. Deng, Z. Cai, D. Fang, H. Liao, and G. Montavon, Application of robot offline programming in thermal spraying, Surf Coat Technol, vol.206, pp.3875-3882, 2012.
DOI : 10.1016/j.surfcoat.2012.03.038

S. Deng, H. Liao, C. Zeng, P. Charles, and C. Coddet, Robotic trajectory autogeneration in thermal spraying, International Thermal Spray Conference, pp.481-485, 2005.

S. Deng, Robot offline programming and real-time monitoring of trajectories: development of an add-in program of robotstudio? for the thermal spraying

, Graduate School of Physics for Engineers and Microtechnology, 2006.

S. Deng, D. Fang, Z. Cai, H. Liao, and G. Montavon, Application of External Axis in Robot-Assisted Thermal Spraying, J Therm Spray Technol, vol.21, issue.6, pp.1203-1215, 2012.

Z. Cai, H. Liang, S. Quan, S. Deng, C. Zeng et al., Computer-Aided Robot Trajectory Auto-generation Strategy in Thermal Spraying, J Therm Spray Technol, vol.24, issue.7, pp.1235-1245, 2015.

S. Deng, H. Liang, Z. Cai, H. Liao, and G. Montavon, Kinematic Optimization of Robot Trajectories for Thermal Spray Coating Application, J Therm Spray Technol, issue.23, pp.1382-1389, 2014.

D. Fang, S. Deng, H. Liao, and C. Coddet, The effect of robot kinematics on the coating thickness uniformity, J Therm Spray Technol, vol.19, issue.4, pp.796-804, 2010.

S. Deng, H. Li, H. Liao, C. Coddet, and C. Zeng, New Functions of Thermal Spray Toolkit A Software Developed for Off-line and Rapid Robot Programming. International Thermal Spray Conference, pp.1437-1442, 2006.

D. Fang, S. Deng, H. Liao, and C. Coddet, The Improvements of Thermal Spray Toolkit, Extended Software for Robotic Off-Line Programming. International Thermal Spray Conference. 2010 (Singapore), pp.522-526, 2010.

F. J. Abu-dakka, F. Rubio, F. Valero, and V. Mata, Evolutionary indirect approach to solving trajectory planning problem for industrial robots operating in workspaces with obstacles, European Journal of Mechanics-A/Solids, vol.42, pp.210-218, 2013.

R. Saravanan, S. Ramabalan, and C. Balamurugan, Evolutionary multi-criteria trajectory modeling of industrial robots in the presence of obstacles, Eng Appl Artif Intel, vol.22, issue.2, pp.329-342, 2009.

T. Chettibi, H. Lehtihet, M. Haddad, and S. Hanchi, Minimum cost trajectory planning for industrial robots, European Journal of Mechanics-A/Solids, vol.23, issue.4, pp.703-715, 2004.

S. F. Saramago and M. Ceccarelli, Effect of basic numerical parameters on a path planning of robots taking into account actuating energy, Mech Mach Theory, vol.39, issue.3, pp.247-260, 2004.

S. Deng, Z. Cai, D. Fang, H. Liao, and G. Montavon, Application of robot offline programming in thermal spraying, Surf Coat Technol, vol.206, pp.3875-3882, 2012.

T. Vivekanandhan, A. Kashani, and R. Echempati, Computer-aided Torch Trajectory Generation for Automated Coating of Parts with Complex Surfaces, J Therm Spray Technol, vol.3, issue.2, pp.208-215, 1994.

A. Hansbo and P. Nylén, Models for the simulation of spray deposition and robot motion optimization in thermal spraying of rotating objects, Surf Coat Technol, vol.122, issue.2-3, pp.191-201, 1999.

S. Leigh and C. Berndt, Evaluation of off-angle thermal spray, Surf Coat Technol, vol.89, issue.3, pp.213-224, 1997.
DOI : 10.1016/s0257-8972(96)02897-6

A. Kout and H. Müller, Parameter optimization for spray coating, Adv Eng Softw, vol.40, issue.10, pp.1078-1086, 2009.
DOI : 10.1016/j.advengsoft.2009.03.001

O. Stier, Fundamental Cost Analysis of Cold Spray, J Therm Spray Technol, vol.23, issue.12, pp.131-139, 2014.
DOI : 10.1007/s11666-013-9972-1

W. Wong, E. Irissou, A. Ryabinin, J. Legoux, and S. Yue, Influence of Helium and Nitrogen Gases on the Properties of Cold Gas Dynamic Sprayed Pure Titanium Coatings, J Therm Spray Technol, vol.20, issue.1-2, pp.213-226, 2011.

M. Fasching, F. Prinz, and L. Weiss, Planning robotic trajectories for thermal spray shape deposition, J Therm Spray Technol, vol.2, issue.1, pp.45-57, 1993.
DOI : 10.1007/bf02647423

S. Deng, H. Liang, Z. Cai, H. Liao, and G. Montavon, Kinematic Optimization of Robot Trajectories for Thermal Spray Coating Application, J Therm Spray Technol, pp.1-8, 2014.
DOI : 10.1007/s11666-014-0137-7

S. Deng, D. Fang, Z. Cai, H. Liao, and G. Montavon, Application of External Axis in Robot-Assisted Thermal Spraying, J Therm Spray Technol, vol.21, issue.6, pp.1203-1215, 2012.
DOI : 10.1007/s11666-012-9818-2

N. Cinca, A. List, F. Gärtner, J. M. Guilemany, and T. Klassen, Influence of spraying parameters on cold gas spraying of iron aluminide intermetallics, Surf Coat Technol, vol.268, pp.99-107, 2015.
DOI : 10.1016/j.surfcoat.2014.07.070

M. Fukumoto, H. Wada, K. Tanabe, M. Yamada, E. Yamaguchi et al., Effect of substrate temperature on deposition behavior of copper particles on substrate surfaces in the cold spray process, J Therm Spray Technol, vol.16, issue.5-6, pp.643-650, 2007.

J. Legoux, E. Irissou, and C. Moreau, Effect of substrate temperature on the formation mechanism of cold-sprayed aluminum, zinc and tin coatings, J Therm Spray Technol, vol.16, issue.5-6, pp.619-626, 2007.

S. Rech, A. Trentin, S. Vezzù, J. Legoux, E. Irissou et al., Influence of pre-heated Al 6061 substrate temperature on the residual stresses of multipass Al coatings deposited by cold spray, J Therm Spray Technol, vol.20, issue.1-2, pp.243-251, 2011.

D. Fang, S. Deng, H. Liao, and C. Coddet, Automatic generation of robot trajectory for free-form surfaces in thermal spraying, Proceedings of the International Thermal Spray Conference, pp.1110-1114, 2011.

S. Dong, B. Song, H. Liao, and C. Coddet, Deposition of NiCrBSi coatings by atmospheric plasma spraying and dry-ice blasting: Microstructure and wear resistance, Surf Coat Technol, vol.268, pp.36-45, 2015.
DOI : 10.1016/j.surfcoat.2014.09.025

L. Tsai, The mechanics of serial and parallel manipulators, 1999.

A. P. Pashkevich, A. B. Dolgui, and K. I. Semkin, Kinematic aspects of a robot-positioner system in an arc welding application, Control Engineering Practice, vol.11, issue.6, pp.633-647, 2003.
DOI : 10.1016/s0967-0661(02)00177-6
URL : https://hal.archives-ouvertes.fr/emse-00704692

X. F. Zha, Optimal pose trajectory planning for robot manipulators, Mech Mach Theory, vol.37, issue.10, pp.1063-1086, 2002.
DOI : 10.1016/s0094-114x(02)00053-8

S. ?-chaoyue-chen, H. Deng, G. Liao, and . Montavon, Robot Kinematic Analysis for Torch Setup Optimization in Thermal Spraying', Oral presentation in Thermal Spray, Proceedings of the International Thermal Spray Conference, pp.647-53, 2015.

. ?-chaoyue-chen, G. Sébastien, D. Sihao, V. Christophe, and L. Hanlin, A novel approach of trajectory generation for damage components recovery by cold spray'. Oral presentation in Processing of the 7th RIPT, 2015.

. ?-chaoyue-chen, X. Yingchun, C. Verdy, S. Deng, and H. Liao, Modelling of Cold Spray Coating Profile and Its Application in Offline Programming Software', Oral presentation in Thermal Spray, Proceedings of the International Thermal Spray Conference, 2016.

}. , Texture FaceText = new Texture(figure

, Material FaceMat = new Material(FaceText

, PickedFace.SetMaterial(FaceMat