, 13 : Photo d'une plaque chromatographique luè a lalumì ere blanche Les résultats préliminaires sont très encourageants. Cette technique pourrait permettre l'identification de la présence de l'espèce inconnue supposée par les résultats de la spectroscopie UV, Discussion générale FIGURE 4

. S. Le-futur-des-inhalateursàinhalateursà-poudre-]-j, P. R. Patton, and . Byron, Inhaling medicines : delivering drugs to the body through the lungs, Nature reviews. Drug discovery, vol.6, issue.11, p.67, 2007.

W. C. Hinds, Aerosol technology : properties, behavior, and measurement of airborne particles, 2012.

H. Smyth and A. J. Hickey, Controlled pulmonary drug delivery, 2011.
DOI : 10.1007/978-1-4419-9745-6

J. L. Rau, The inhalation of drugs : advantages and problems, Respiratory Care, vol.50, issue.3, pp.367-382, 2005.

B. A. Brown, J. A. Rasmussen, D. P. Becker, and D. R. Friend, A piezo-electronic inhaler for local & systemic applications, Drug Deliv Technol, vol.4, issue.8, pp.90-93, 2004.

H. Larhrib, G. P. Martin, C. Marriott, and D. Prime, The influence of carrier and drug morphology on drug delivery from dry powder formulations, International Journal of Pharmaceutics, vol.257, issue.1-2, pp.283-296, 2003.
DOI : 10.1016/S0378-5173(03)00156-X

P. M. Young, D. Roberts, H. Chiou, W. Rae, H. K. Chan et al., Composite carriers improve the aerosolisation efficiency of drugs for respiratory delivery, Journal of Aerosol Science, vol.39, issue.1, pp.82-93, 2008.
DOI : 10.1016/j.jaerosci.2007.10.003

P. Begat, D. Morton, J. N. Staniforth, and R. Price, The Cohesive-Adhesive Balances in Dry Powder Inhaler Formulations I: Direct Quantification by Atomic Force Microscopy, Pharmaceutical Research, vol.21, issue.9, pp.1591-1597, 2004.
DOI : 10.1023/B:PHAM.0000041453.24419.8a

C. Dunbar and J. Mitchell, Analysis of Cascade Impactor Mass Distributions, Journal of Aerosol Medicine, vol.18, issue.4, pp.439-451, 2005.
DOI : 10.1089/jam.2005.18.439

S. Stegemann, S. Kopp, G. Borchard, V. P. Shah, S. Senel et al., Developing and advancing dry powder inhalation towards enhanced therapeutics, European Journal of Pharmaceutical Sciences, vol.48, issue.1-2, pp.181-194, 2013.
DOI : 10.1016/j.ejps.2012.10.021

A. Cruz, J. Bousquet, and N. Khaltaev, Global surveillance, prevention and control of chronic respiratory diseases : a comprehensive approach. World Health Organization, 2007.

J. Bousquet, R. Dahl, and N. Khaltaev, Global Alliance against Chronic Respiratory Diseases, Allergy, vol.8, issue.Suppl. 1, pp.216-223, 2007.
DOI : 10.1136/bmj.314.7084.860

URL : https://hal.archives-ouvertes.fr/inserm-01401204

X. M. Zeng, G. P. Martin, S. K. Tee, and C. Marriott, The role of fine particle lactose on the dispersion and deaggregation of salbutamol sulphate in an air stream in vitro, International Journal of Pharmaceutics, vol.176, issue.1, pp.99-110, 1998.
DOI : 10.1016/S0378-5173(98)00300-7

L. W. Wong, N. M. Kassem, and D. Ganderton, The effect of the shape of fine particles on the inhalation properties of powder mixtures, J. Pharm. Pharmacol, vol.41, p.24, 1989.

J. Heyder and M. Svartengren, Basic Principles of Particle Behavior in the Human Respiratory Tract, Lung biology in Health and Disease, vol.162, pp.21-46, 2001.
DOI : 10.1201/b14022-3

H. W. Frijlink and A. H. De-boer, Dry powder inhalers for pulmonary drug delivery, Expert Opinion on Drug Delivery, vol.286, issue.1, pp.67-86, 2004.
DOI : 10.1016/S0140-6736(99)95140-1

T. C. Carvalho, J. I. Peters, and R. O. Williams, Influence of particle size on regional lung deposition ??? What evidence is there?, International Journal of Pharmaceutics, vol.406, issue.1-2, pp.1-10, 2011.
DOI : 10.1016/j.ijpharm.2010.12.040

R. Köbrich, G. Rudolf, and W. Stahlhofen, A mathematical model of mass deposition in man, Annals of Occupational Hygiene, vol.38, pp.15-23, 1994.

G. Rudolf, R. Köbrich, W. Stahlhofen, and A. C. James, Regional aerosol deposition in man ? a statistical and algebraic model, Annals Of Occupational Hygiene, vol.38, pp.1-14, 1994.
DOI : 10.1016/0021-8502(90)90266-z

P. J. Rees, T. J. Clark, and F. Moren, The importance of particle size in response to inhaled bronchodilators, European journal of respiratory diseases. Supplement, vol.119, pp.73-78, 1982.

G. Persson and J. E. Wiren, The bronchodilator response from inhaled terbutaline is influenced by the mass of small particles : a study on a dry powder inhaler (turbuhaler)

, European Respiratory Journal, vol.2, issue.3, pp.253-256, 1989.

M. D. Louey, M. Van-oort, and A. J. Hickey, Aerosol Dispersion of Respirable Particles in Narrow Size Distributions Produced by Jet-Milling and Spray-Drying Techniques, Pharmaceutical Research, vol.21, issue.7, pp.1200-1206, 2004.
DOI : 10.1023/B:PHAM.0000033007.27278.60

X. M. Zeng, G. P. Martin, and C. Marriott, Particulate Interactions in Dry Powder Formulation for Inhalation, 2000.
DOI : 10.4324/9780203209592

J. N. Staniforth, Relationship between particle packing and the physical stability of powder mixes, Journal of Pharmacy and Pharmacology, vol.16, issue.10, pp.692-697, 1985.
DOI : 10.1016/0032-5910(77)85034-1

J. N. Staniforth, Q. Li, V. Rudolph, and W. Peukert, British Pharmaceutical Conference Science Award Lecture 1986: Order out of chaos, Journal of Pharmacy and Pharmacology, vol.16, issue.5, pp.329-334, 1987.
DOI : 10.1016/0032-5910(77)87005-8

J. P. Seville, C. D. Willett, and P. C. Knight, Interparticle forces in fluidisation: a review, Powder Technology, vol.113, issue.3, pp.261-268, 2000.
DOI : 10.1016/S0032-5910(00)00309-0

K. Kendall and C. Stainton, Adhesion and aggregation of fine particles, Powder Technology, vol.121, issue.2-3, pp.223-229, 2001.
DOI : 10.1016/S0032-5910(01)00386-2

K. Kendall, Adhesion: Molecules and Mechanics, Science, vol.263, issue.5154, pp.1720-1726, 1994.
DOI : 10.1126/science.263.5154.1720

E. H. Kim, X. D. Chen, and D. Pearce, Effect of surface composition on the flowability of industrial spray-dried dairy powders, Colloids and Surfaces B: Biointerfaces, vol.46, issue.3, pp.182-187, 2005.
DOI : 10.1016/j.colsurfb.2005.11.005

J. Raula, A. Lähde, and E. I. Kauppinen, A Novel Gas Phase Method for the Combined Synthesis and Coating of Pharmaceutical Particles, Pharmaceutical Research, vol.30, issue.1, pp.242-245, 2008.
DOI : 10.4324/9780203209592

C. C. Sun, Improving Powder Flow Properties of Citric Acid by Crystal Hydration, Journal of Pharmaceutical Sciences, vol.98, issue.5, pp.1744-1749, 2009.
DOI : 10.1002/jps.21554

J. Yang, A. Sliva, A. Banerjee, R. N. Dave, and R. Pfeffer, Dry particle coating for improving the flowability of cohesive powders, Powder Technology, vol.158, issue.1-3, pp.21-33, 2005.
DOI : 10.1016/j.powtec.2005.04.032

C. Weiler, M. Wolkenhauer, M. Trunk, and P. Langguth, New model describing the total dispersion of dry powder agglomerates, Powder Technology, vol.203, issue.2, pp.248-253, 2010.
DOI : 10.1016/j.powtec.2010.05.015

P. Begat, D. Morton, J. N. Staniforth, and R. Price, The Cohesive-Adhesive Balances in Dry Powder Inhaler Formulations II: Influence on Fine Particle Delivery Characteristics, Pharmaceutical Research, vol.21, issue.10, pp.1826-1833, 2004.
DOI : 10.1023/B:PHAM.0000045236.60029.cb

P. R. Byron, Some Future Perspectives for Unit Dose Inhalation Aerosols, Drug Development and Industrial Pharmacy, vol.69, issue.119, pp.993-1015, 1986.
DOI : 10.1016/B978-0-407-00265-4.50007-6

A. J. Hickey, N. M. Concessio, M. M. Van-oort, and R. M. Platz, Factors influencing the dispersion of dry powders as aerosols, pp.58-58, 1994.

H. Rumpf, Mechanische Verfahrenstechnik, 1990.

E. Finot, E. Lesniewska, J. C. Mutin, S. I. Hosain, and J. P. Goudonnet, Contact force dependence on relative humidity : investigations using atomic force microscopy, Scanning microscopy, vol.10, issue.3, pp.697-708, 1996.

E. Finot, E. Lesniewska, J. C. Mutin, and J. P. Goudonnet, Reactivity of gypsum faces according to the relative humidity by scanning force microscopy, Surface Science, vol.384, issue.1-3, pp.1-3201, 1997.
DOI : 10.1016/S0039-6028(97)00220-3

V. Berard, E. Lesniewska, C. Andres, D. Pertuy, C. Laroche et al., Dry powder inhaler: influence of humidity on topology and adhesion studied by AFM, International Journal of Pharmaceutics, vol.232, issue.1-2, pp.213-224, 2002.
DOI : 10.1016/S0378-5173(01)00913-9

M. , Surface and interfacial forces, 2009.

S. C. Yang and S. S. Hsiau, The simulation of powders with liquid bridges in a 2D vibrated bed, Chemical Engineering Science, vol.56, issue.24, pp.6837-6849, 2001.
DOI : 10.1016/S0009-2509(01)00321-9

F. Podczeck, J. M. Newton, and M. B. James, Variations in the adhesion force between a drug and carrier particles as a result of changes in the relative humidity of the air, International Journal of Pharmaceutics, vol.149, issue.2, pp.151-160, 1997.
DOI : 10.1016/S0378-5173(97)04869-2

J. N. Staniforth, The importance of electrostatic measurements in aerosol formulation and reformulation. Respiratory Drug Delivery IV, pp.303-311, 1994.

J. N. Staniforth and J. E. Rees, Electrostatic charge interactions in ordered powder mixes, Journal of Pharmacy and Pharmacology, vol.25, issue.Suppl., pp.69-76, 1982.
DOI : 10.1080/14786440408634188

P. A. Carter, G. Rowley, E. J. Fletcher, and V. Stylianopoulos, Measurement of electrostatic charge decay in pharmaceutical powders and polymer materials used in dry powder inhaler devices. Drug development and industrial pharmacy, pp.1083-1088, 1998.

P. R. Byron, J. Peart, and J. N. Staniforth, Aerosol electrostatics i : properties of fine powders before and after aerosolization by dry powder inhalers, Pharmaceutical Research, vol.14, issue.6, pp.698-705, 1997.
DOI : 10.1023/A:1012181818244

P. C. Kwok and H. K. Chan, Effect of Relative Humidity on the Electrostatic Charge Properties of Dry Powder Inhaler Aerosols, Pharmaceutical Research, vol.92, issue.136, pp.277-288, 2008.
DOI : 10.1007/978-1-4899-6600-1

F. S. Bennett, P. A. Carter, G. Rowley, and Y. Dandiker, Modification of electrostatic charge on inhaled carrier lactose particles by addition of fine particles. Drug development and industrial pharmacy, pp.99-103, 1999.

A. Elajnaf, P. Carter, and G. Rowley, Electrostatic characterisation of inhaled powders: Effect of contact surface and relative humidity, European Journal of Pharmaceutical Sciences, vol.29, issue.5, pp.375-384, 2006.
DOI : 10.1016/j.ejps.2006.07.006

P. M. Young, D. Traini, and S. Edge, Advances in pulmonary therapy, Advanced drug formulation design to optimize therapeutic outcomes, pp.1-51, 2007.

A. J. Hickey and H. M. Mansour, Delivery of Drugs by the Pulmonary Route, Modern Pharmaceutics : Applications and Advances. Informa Healthcare, 2009.
DOI : 10.1201/9780824744694.ch14

D. Ganderton and N. M. Kassem, Dry powder inhalers, Adv Pharm Sci, vol.6, pp.165-191, 1992.

B. Gandevia, Historical review of the use of parasympatholytic agents in the treatment of respiratory disorders. Postgraduate medical journal, pp.13-20, 1974.

P. J. Anderson, Delivery Options and Devices for Aerosolized Therapeutics, Chest, vol.120, issue.3, pp.89-93, 2001.
DOI : 10.1378/chest.120.3_suppl.89S

, BIBLIOGRAPHIE

M. Sanders, Inhalation therapy : an historical review. Primary care respiratory journal : journal of the General Practice Airways Group, pp.71-81, 2007.

L. Pariente, Naissance et evolution de quinze formes pharmaceutiques, 1996.

N. Mutch, Inhalation of chemotherapeutic substances. The Lancet, pp.775-780, 1944.

N. Mutch and R. E. , Penicillin by inhalation. The Lancet, pp.650-652, 1945.

L. R. Krasno and P. S. Rhoads, The inhalation of penicillin dust ; its proper role in the management of respiratory infections. American practitioner and digest of treatment, pp.649-653, 1949.

, Pulmonary drug delivery devices market (product type -dry powder inhalers, metered dose inhalers and nebulizers ; application -asthma, copd, and cystic fibrosis ; distribution channel -retail pharmacies, hospital pharmacies, and e-commerce) -global industry analysis, size, share, growth, trends, and forecast, 2016.

R. Y. Yang, R. P. Zou, A. B. Yu, and S. K. Choi, Characterization of interparticle forces in the packing of cohesive fine particles, Physical Review E, vol.39, issue.3, p.31302, 2008.
DOI : 10.1126/science.1125151

A. J. Forsyth, S. R. Hutton, C. F. Osborne, and M. J. Rhodes, Effects of Interparticle Force on the Packing of Spherical Granular Material, Physical Review Letters, vol.4, issue.24, p.244301, 2001.
DOI : 10.1016/S0031-8914(37)80203-7

S. P. Newman and W. W. Busse, Evolution of dry powder inhaler design, formulation, and performance, Respiratory Medicine, vol.96, issue.5, pp.293-304, 2002.
DOI : 10.1053/rmed.2001.1276

A. Voss and W. H. Finlay, Deagglomeration of dry powder pharmaceutical aerosols, International Journal of Pharmaceutics, vol.248, issue.1-2, pp.39-50, 2002.
DOI : 10.1016/S0378-5173(02)00319-8

C. A. Dunber, A. J. Hickey, and P. Holzner, Dispersion and Characterization of Pharmaceutical Dry Powder Aerosols, KONA Powder and Particle Journal, vol.16, issue.0, pp.7-45, 1998.
DOI : 10.14356/kona.1998007

S. Yuu and Y. Ohtani, Particle motion in fluid. Powder Technology Handbook, p.125, 2006.

G. Calvert, M. Ghadiri, and R. Tweedie, Aerodynamic dispersion of cohesive powders: A review of understanding and technology, Advanced Powder Technology, vol.20, issue.1, pp.4-16, 2009.
DOI : 10.1016/j.apt.2008.09.001

H. M. Mansour, Z. Xu, and A. J. Hickey, Dry Powder Aerosols Generated by Standardized Entrainment Tubes from Alternative Sugar Blends: 3. Trehalose Dihydrate and d-Mannitol Carriers, Journal of Pharmaceutical Sciences, vol.99, issue.8, pp.993430-3441, 2010.
DOI : 10.1002/jps.22101

Z. Xu, H. M. Mansour, T. Mulder, R. Mclean, J. Langridge et al., Dry Powder Aerosols Generated by Standardized Entrainment Tubes From Drug Blends With Lactose Monohydrate: 1. Albuterol Sulfate and Disodium Cromoglycate, Journal of Pharmaceutical Sciences, vol.99, issue.8, pp.993398-3414, 2010.
DOI : 10.1002/jps.22107

]. A. Fathi, Th??or??me KAM faible et th??orie de Mather sur les syst??mes lagrangiens, Comptes Rendus de l'Academie des Sciences-Series I-Mathematics, pp.1043-1046, 1997.
DOI : 10.1016/S0764-4442(97)87883-4

R. Livi and A. Vulpiani, , 2015.

Z. Xu, H. M. Mansour, and A. J. Hickey, Particle Interactions in Dry Powder Inhaler Unit Processes: A Review, Journal of Adhesion Science and Technology, vol.130, issue.4-5, pp.4-5451, 2011.
DOI : 10.1016/0378-5173(95)04211-3

H. Steckel and B. W. Muller, In vitro evaluation of dry powder inhalers I: drug deposition of commonly used devices, International Journal of Pharmaceutics, vol.154, issue.1, pp.19-29, 1997.
DOI : 10.1016/S0378-5173(97)00113-0

M. Y. Yang, J. G. Chan, and H. K. Chan, Pulmonary drug delivery by powder aerosols, Journal of Controlled Release, vol.193, pp.228-240, 2014.
DOI : 10.1016/j.jconrel.2014.04.055

S. P. Newman, Dry powder inhalers for optimal drug delivery, Expert Opinion on Biological Therapy, vol.200, issue.1, pp.23-33, 2004.
DOI : 10.1378/chest.124.1.360

J. D. Brain and J. D. Blanchard, Mechanisms of particle deposition and clearance. Aerosols in Medicine : Principles, Diagnosis and Therapy, pp.351-74, 1993.

M. Steinberg, J. F. Borzelleca, E. K. Enters, F. K. Kinoshita, A. Loper et al., A New Approach to the Safety Assessment of Pharmaceutical Excipients, Regulatory Toxicology and Pharmacology, vol.24, issue.2, pp.149-154, 1996.
DOI : 10.1006/rtph.1996.0120

G. Pifferi and P. Restani, The safety of pharmaceutical excipients, Il Farmaco, vol.58, issue.8, pp.541-550, 2003.
DOI : 10.1016/S0014-827X(03)00079-X

H. Steckel and N. Bolzen, Alternative sugars as potential carriers for dry powder inhalations, International Journal of Pharmaceutics, vol.270, issue.1-2, pp.297-306, 2004.
DOI : 10.1016/j.ijpharm.2003.10.039

G. Saint-lorant, P. Leterme, A. Gayot, and M. P. Flament, Influence of carrier on the performance of dry powder inhalers, International Journal of Pharmaceutics, vol.334, issue.1-2, pp.85-91, 2007.
DOI : 10.1016/j.ijpharm.2006.10.028

Y. Rahimpour, M. Kouhsoltani, and H. Hamishehkar, Alternative carriers in dry powder inhaler formulations, Drug Discovery Today, vol.19, issue.5, pp.618-626, 2014.
DOI : 10.1016/j.drudis.2013.11.013

D. Bilton, E. Daviskas, S. D. Anderson, J. Kolbe, G. King et al., Phase 3 Randomized Study of the Efficacy and Safety of Inhaled Dry Powder Mannitol for the Symptomatic Treatment of Non-Cystic Fibrosis Bronchiectasis, Chest, vol.144, issue.1, pp.215-225, 2013.
DOI : 10.1378/chest.12-1763

A. Jaques, E. Daviskas, J. A. Turton, K. Mckay, P. Cooper et al., Inhaled Mannitol Improves Lung Function in Cystic Fibrosis, Chest, vol.133, issue.6, pp.1388-1396, 2008.
DOI : 10.1378/chest.07-2294

D. Bilton, P. Robinson, P. Cooper, C. G. Gallagher, J. Kolbe et al., Inhaled dry powder mannitol in cystic fibrosis : an efficacy and safety study The composition of milks of various species : a review, Dairy Sci. Abstr, pp.1071-1080, 1970.

J. J. Nijdam and T. A. Langrish, The effect of surface composition on the functional properties of milk powders, Journal of Food Engineering, vol.77, issue.4, pp.919-925, 2006.
DOI : 10.1016/j.jfoodeng.2005.08.020

P. Baldrick and D. G. Bamford, A toxicological review of lactose to support clinical administration by inhalation, Food and Chemical Toxicology, vol.35, issue.7, pp.719-733, 1997.
DOI : 10.1016/S0278-6915(97)00041-0

H. Larhrib, X. M. Zeng, G. P. Martin, C. Marriott, and J. Pritchard, The use of different grades of lactose as a carrier for aerosolised salbutamol sulphate, International Journal of Pharmaceutics, vol.191, issue.1, pp.1-14, 1999.
DOI : 10.1016/S0378-5173(99)00164-7

C. Pitchayajittipong, R. Price, J. Shur, J. S. Kaerger, and S. Edge, Characterisation and functionality of inhalation anhydrous lactose, International Journal of Pharmaceutics, vol.390, issue.2, pp.134-141, 2010.
DOI : 10.1016/j.ijpharm.2010.01.028

S. Edge, S. Mueller, R. Price, and J. Shur, Factors affecting defining the quality and functionality of excipients used in the manufacture of dry powder inhaler products. Drug development and industrial pharmacy, pp.966-973, 2008.

H. Steckel, P. Markefka, and R. Kammelar, Effect of milling and sieving on functionality of dry powder inhalation products, International Journal of Pharmaceutics, vol.309, issue.1-2, pp.51-59, 2006.
DOI : 10.1016/j.ijpharm.2005.10.043

L. H. Cartilier and A. J. Moes, Influence du type de lactose sur l'homogeneite de melanges de poudres e principe actif cohesif et faiblement dose, STP pharma, vol.5, issue.3, pp.152-159, 1989.

G. K. Bolhuis and Z. T. Chowhan, Materials for Direct Compaction, Drugs and the Pharmaceutical Sciences, vol.71, pp.419-500, 1996.
DOI : 10.1201/b14207-15

J. H. Bell, P. S. Hartley, and J. S. Cox, Dry Powder Aerosols I: A New Powder Inhalation Device, Journal of Pharmaceutical Sciences, vol.60, issue.10, pp.601559-1564, 1971.
DOI : 10.1002/jps.2600601028

A. A. Elamin, T. Sebhatu, and C. Ahlneck, The use of amorphous model substances to study mechanically activated materials in the solid state, International Journal of Pharmaceutics, vol.119, issue.1, pp.25-36, 1995.
DOI : 10.1016/0378-5173(94)00364-B

X. M. Zeng, G. P. Martin, C. Marriott, and J. Pritchard, The influence of carrier morphology on drug delivery by dry powder inhalers, International Journal of Pharmaceutics, vol.200, issue.1, pp.93-106, 2000.
DOI : 10.1016/S0378-5173(00)00347-1

H. J. Venables and J. I. Wells, Powder mixing. Drug development and industrial pharmacy, pp.599-612, 2001.

M. Kumon, M. Suzuki, A. Kusai, E. Yonemochi, and K. Terada, Novel Approach to DPI Carrier Lactose with Mechanofusion Process with Additives and Evaluation by IGC, CHEMICAL & PHARMACEUTICAL BULLETIN, vol.54, issue.11, pp.1508-1514, 2006.
DOI : 10.1248/cpb.54.1508

, BIBLIOGRAPHIE

M. Kumon, S. Machida, M. Suzuki, A. Kusai, E. Yonemochi et al., Application and Mechanism of Inhalation Profile Improvement of DPI Formulations by Mechanofusion with Magnesium Stearate, CHEMICAL & PHARMACEUTICAL BULLETIN, vol.56, issue.5, pp.617-625, 2008.
DOI : 10.1248/cpb.56.617

T. A. Nickerson, Lactose chemistry, Journal of Agricultural and Food Chemistry, vol.27, issue.4, pp.672-677, 1979.
DOI : 10.1021/jf60224a038

J. V. Reger, New aspects of an old sugar-lactose, Cereal Sci. Today, vol.3, issue.10, p.270, 1958.

R. C. Rowe, P. J. Sheskey, and P. J. Weller, Handbook of pharmaceutical excipients, 2006.

M. Morisset, D. Moneret-vautrin, A. Schuller, and G. Kanny, Allergy to Cow Milk Proteins Contaminating Lactose, Common Excipient of Dry Powder Inhalers for Asthma, Journal of Allergy and Clinical Immunology, vol.117, issue.2, p.95, 2006.
DOI : 10.1016/j.jaci.2005.12.379

J. S. Kaerger, R. Price, P. M. Young, S. Edge, and M. J. Tobyn, Carriers for dpis : formulation and regulatory challenges, Pharmaceutical Technology Europe, issue.10, p.1825, 2006.

S. R. Marek, M. J. Donovan, and H. Smyth, Effects of mild processing pressures on the performance of dry powder inhaler formulations for inhalation therapy (1): Budesonide and lactose, European Journal of Pharmaceutics and Biopharmaceutics, vol.78, issue.1, pp.97-106, 2011.
DOI : 10.1016/j.ejpb.2010.12.020

M. C. Adeyeye and H. G. Brittain, Preformulation solid dosage form development, 2008.

B. Shah, V. K. Kakumanu, and A. K. Bansal, Analytical techniques for quantification of amorphous/crystalline phases in pharmaceutical solids, Journal of Pharmaceutical Sciences, vol.95, issue.8, pp.951641-1665, 2006.
DOI : 10.1002/jps.20644

J. Vollenbroek, G. A. Hebbink, S. Ziffels, and H. Steckel, Determination of low levels of amorphous content in inhalation grade lactose by moisture sorption isotherms, International Journal of Pharmaceutics, vol.395, issue.1-2, pp.62-70, 2010.
DOI : 10.1016/j.ijpharm.2010.04.035

L. E. Briggner, G. Buckton, K. Bystrom, and P. Darcy, The use of isothermal microcalorimetry in the study of changes in crystallinity induced during the processing of powders, International Journal of Pharmaceutics, vol.105, issue.2, pp.125-135, 1994.
DOI : 10.1016/0378-5173(94)90458-8

J. Bronlund and T. Paterson, Moisture sorption isotherms for crystalline, amorphous and predominantly crystalline lactose powders, International Dairy Journal, vol.14, issue.3, pp.247-254, 2004.
DOI : 10.1016/S0958-6946(03)00176-6

G. H. Ward and R. K. Schultz, Process induced crystallinity changes in albuterol sulfate and its effect on powder physical stability, Pharmaceutical Research, vol.12, issue.5, pp.773-779, 1995.
DOI : 10.1023/A:1016232230638

M. H. Shariare, M. De-matas, P. York, and Q. Shao, The impact of material attributes and process parameters on the micronisation of lactose monohydrate, International Journal of Pharmaceutics, vol.408, issue.1-2, pp.58-66, 2011.
DOI : 10.1016/j.ijpharm.2011.01.047

. Seville, The effects of high shear blending on alpha-lactose monohydrate, International journal of pharmaceutics, vol.339, issue.1, pp.84-90, 2007.

K. Brodka-pfeiffer, P. Langguth, P. Grab, and H. Hausler, Influence of mechanical activation on the physical stability of salbutamol sulphate, European Journal of Pharmaceutics and Biopharmaceutics, vol.56, issue.3, pp.393-400, 2003.
DOI : 10.1016/S0939-6411(03)00134-6

B. C. Hancock and G. Zografi, Characteristics and Significance of the Amorphous State in Pharmaceutical Systems, Journal of Pharmaceutical Sciences, vol.86, issue.1, pp.1-12, 1997.
DOI : 10.1021/js9601896

R. Price and P. M. Young, On the physical transformations of processed pharmaceutical solids, Micron, vol.36, issue.6, pp.519-524, 2005.
DOI : 10.1016/j.micron.2005.04.003

M. D. Louey, P. Mulvaney, and P. J. Stewart, Characterisation of adhesional properties of lactose carriers using atomic force microscopy, Journal of Pharmaceutical and Biomedical Analysis, vol.25, issue.3-4, pp.559-567, 2001.
DOI : 10.1016/S0731-7085(00)00523-9

J. N. Staniforth, Improvement in dry powder inhaler performance : surface passivation effects. Drug Delivery to the Lungs VII, 1996.

C. Weiler, M. Egen, M. Trunk, and P. Langguth, Force control and powder dispersibility of spray dried particles for inhalation, Journal of Pharmaceutical Sciences, vol.99, issue.1, pp.303-316, 2010.
DOI : 10.1002/jps.21849

J. N. Staniforth, The science of formulation of powders for inhalation, International Symposium on Dry Powder Inhalers, pp.23-32, 1996.

M. M. De-villiers, J. G. Van, and . Watt, Interactive mixing between agglomerated drug particles and coarse carrier particles, Drug Development and Industrial Pharmacy, vol.15, issue.12, pp.2055-2061, 1989.
DOI : 10.1111/j.2042-7158.1987.tb03393.x

M. P. Flament, P. Leterme, and A. Gayot, The influence of carrier roughness on adhesion, content uniformity and the in vitro deposition of terbutaline sulphate from dry powder inhalers, International Journal of Pharmaceutics, vol.275, issue.1-2, pp.201-209, 2004.
DOI : 10.1016/j.ijpharm.2004.02.002

B. H. Dickhoff, A. H. De-boer, D. Lambregts, and H. W. Frijlink, The effect of carrier surface and bulk properties on drug particle detachment from crystalline lactose carrier particles during inhalation, as function of carrier payload and mixing time, European Journal of Pharmaceutics and Biopharmaceutics, vol.56, issue.2, pp.291-302, 2003.
DOI : 10.1016/S0939-6411(03)00109-7

N. M. Kassem, THE INFLUENCE OF CARRIER SURFACE ON THE CHARACTERISTICS OF INSPIRABLE POWDER AEROSOLS, Journal of Pharmacy and Pharmacology, vol.41, issue.Suppl., p.42, 1990.
DOI : 10.1111/j.2042-7158.1982.tb04210.x

Y. Kawashima, T. Serigano, T. Hino, H. Yamamoto, and H. Takeuchi, Effect of surface morphology of carrier lactose on dry powder inhalation property of pranlukast hydrate, International Journal of Pharmaceutics, vol.172, issue.1-2, pp.179-188, 1998.
DOI : 10.1016/S0378-5173(98)00202-6

X. M. Zeng, G. P. Martin, S. K. Tee, A. A. Ghoush, and C. Marriott, Effects of particle size and adding sequence of fine lactose on the deposition of salbutamol sulphate from a dry powder formulation, International Journal of Pharmaceutics, vol.182, issue.2, pp.133-144, 1999.
DOI : 10.1016/S0378-5173(99)00021-6

E. Guenette, A. Barrett, D. Kraus, R. Brody, L. Harding et al., Understanding the effect of lactose particle size on the properties of DPI formulations using experimental design, International Journal of Pharmaceutics, vol.380, issue.1-2, pp.80-88, 2009.
DOI : 10.1016/j.ijpharm.2009.07.002

M. D. Jones and R. Price, The Influence of Fine Excipient Particles on the Performance of Carrier-Based Dry Powder Inhalation Formulations, Pharmaceutical Research, vol.55, issue.8, pp.1665-1674, 2006.
DOI : 10.4324/9780203209592

A. Lexmond, P. Hagedoorn, M. Van-den-noort, A. Hickey, H. Frijlink et al., The influence of lactose fines in adhesive mixtures for inhalation, Proceedings from Drug Delivery to the Lungs, 2010.

M. J. Clarke, G. Layzell, M. J. Tobyn, and J. N. Staniforth, The role of fine particle lactose in agglomerated dry powder aerosol formulations, Journal of Pharmacy and Pharmacology, vol.50, issue.S9, pp.186-186, 1998.
DOI : 10.1111/j.2042-7158.1987.tb03142.x

B. H. Dickhoff, Adhesive mixtures for powder inhalation : The effect of carrier (surface and bulk) properties, carrier payload and mixing conditions on the performance of adhesive mixtures for inhalation, 2006.

J. Shur, H. Harris, M. D. Jones, J. S. Kaerger, and R. Price, The Role of Fines in the Modification of the Fluidization and Dispersion Mechanism Within Dry Powder Inhaler Formulations, Pharmaceutical Research, vol.34, issue.7, pp.1631-1640, 2008.
DOI : 10.4324/9780203209592

T. Sebti, F. Vanderbist, and K. Amighi, Evaluation of the content homogeneity and dispersion properties of fluticasone DPI compositions, Journal of Drug Delivery Science and Technology, vol.17, issue.3, pp.223-229, 2007.
DOI : 10.1016/S1773-2247(07)50040-7

M. D. Louey, S. Razia, and P. J. Stewart, Influence of physico-chemical carrier properties on the in vitro aerosol deposition from interactive mixtures, International Journal of Pharmaceutics, vol.252, issue.1-2, pp.87-98, 2003.
DOI : 10.1016/S0378-5173(02)00621-X

H. Adi, I. Larson, and P. J. Stewart, Influence of the polydispersity of the added fine lactose on the dispersion of salmeterol xinafoate from mixtures for inhalation, european journal of pharmaceutical sciences, vol.36, issue.2, pp.265-274, 2009.

R. Guchardi, M. Frei, E. John, and J. S. Kaerger, Influence of fine lactose and magnesium stearate on low dose dry powder inhaler formulations, International Journal of Pharmaceutics, vol.348, issue.1-2, pp.10-17, 2008.
DOI : 10.1016/j.ijpharm.2007.06.041

S. Yang and J. R. Evans, Metering and dispensing of powder; the quest for new solid freeforming techniques, Powder Technology, vol.178, issue.1, pp.56-72, 2007.
DOI : 10.1016/j.powtec.2007.04.004

F. Eskandar, M. Lejeune, S. Edge, J. C. Birchall, B. E. Jones et al., Low powder mass filling of dry powder inhalation formulations Drug development and industrial pharmacy A comparison of the puncturing properties of gelatin and hypromellose capsules for use in dry powder inhalers. Drug development and industrial pharmacy, pp.24-32, 2008.

L. Mortier, A. Braekman, D. Cartuyvels, R. Van-renterghem, J. De et al., Intrinsic indicators for monitoring heat damage of consumption milk, pp.221-225, 2000.

J. Ballongue, C. Schumann, and P. Quignon, Effects of Lactulose and Lactitol on Colonic Microflora and Enzymatic Activity, Scandinavian Journal of Gastroenterology, vol.24, issue.12, pp.41-44, 1997.
DOI : 10.1016/S0168-8278(86)80485-8

Y. Bouhnik, A. Attar, F. A. Joly, M. Riottot, F. Dyard et al., Lactulose ingestion increases faecal bifidobacterial counts: A randomised double-blind study in healthy humans, European Journal of Clinical Nutrition, vol.14, issue.3, p.462, 2004.
DOI : 10.1080/089106002320644357

URL : http://www.nature.com/ejcn/journal/v58/n3/pdf/1601829a.pdf

T. Mizota, T. Mori, T. Yaeshima, T. Yanagida, K. Iwatsuki et al., Effects of low dosages of lactulose on the intestinal function of healthy adults, Milchwissenschaft, vol.57, issue.6, pp.312-315, 2002.

K. M. Tuohy, C. J. Ziemer, A. Klinder, Y. Knobel, B. L. Pool-zobel et al., A Human Volunteer Study to Determine the Prebiotic Effects of Lactulose Powder on Human Colonic Microbiota, Microbial Ecology in Health and Disease, vol.68, issue.3, pp.165-173, 2002.
DOI : 10.1128/AEM.68.6.2982-2990.2002

C. Schumann, Medical, nutritional and technological properties of lactulose. An update, European Journal of Nutrition, vol.41, issue.0, p.41, 2002.
DOI : 10.1007/s00394-002-1103-6

N. Seki, H. Hamano, Y. Iiyama, Y. Asano, S. Kokubo et al., Effect of Lactulose on Calcium and Magnesium Absorption: A Study Using Stable Isotopes in Adult Men, Journal of Nutritional Science and Vitaminology, vol.53, issue.1, pp.5-12, 2007.
DOI : 10.3177/jnsv.53.5

G. S. Avery, E. F. Davies, and R. N. Brogden, Lactulose, Drugs, vol.4, issue.1???2, pp.7-48, 1972.
DOI : 10.2165/00003495-197204010-00003

A. Mendez and A. Olano, Lactulose. a review of some chemical properties and applications in infant nutrition and medicine, Dairy Science Abstracts, 1979.

T. V. Kot and N. A. Pettit-young, Lactulose in the Management of Constipation: A Current Review, Annals of Pharmacotherapy, vol.45, issue.1, pp.1277-1282, 1992.
DOI : 10.1097/00004836-198100031-00005

H. Liehr and W. D. Heine, Treatment of endotoxemia in galactosamine hepatitis by lactulose administered intravenously, Hepato-gastroenterology, vol.28, issue.6, p.296, 1981.

J. W. Greve, D. J. Gouma, P. A. Von-leeuwen, and W. A. Buurman, Lactulose inhibits endotoxin induced tumour necrosis factor production by monocytes. An in vitro study., Gut, vol.31, issue.2
DOI : 10.1136/gut.31.2.198

URL : http://gut.bmj.com/content/gutjnl/31/2/198.full.pdf

, Gut, vol.31, issue.2, pp.198-203, 1990.

A. B. Foraker, C. M. Khantwal, and P. W. Swaan, Current perspectives on the cellular uptake and trafficking of riboflavin. Advanced drug delivery reviews, pp.551467-1483, 2003.

C. M. Burgess, E. J. Smid, and D. Van-sinderen, Bacterial vitamin B2, B11 and B12 overproduction: An overview, International Journal of Food Microbiology, vol.133, issue.1-2, pp.1-7, 2009.
DOI : 10.1016/j.ijfoodmicro.2009.04.012

W. Wong, D. F. Fletcher, D. Traini, H. K. Chan, J. Crapper et al., Particle Aerosolisation and Break-Up in Dry Powder Inhalers: Evaluation and Modelling of Impaction Effects for Agglomerated Systems, Journal of Pharmaceutical Sciences, vol.100, issue.7, pp.2744-2754, 2011.
DOI : 10.1002/jps.22503

P. Begat, R. Price, H. Harris, D. Morton, and J. N. Staniforth, The Influence of Force Control Agents on the Cohesive-Adhesive Balance in Dry Powder Inhaler Formulations, KONA Powder and Particle Journal, vol.23, issue.0, pp.109-121, 2005.
DOI : 10.14356/kona.2005014

D. Traini, P. Rogueda, P. Young, and R. Price, Surface Energy and Interparticle Force Correlation in Model pMDI Formulations, Pharmaceutical Research, vol.92, issue.5, pp.816-825, 2005.
DOI : 10.1007/978-1-4615-8825-2

M. D. Jones, H. Harris, J. C. Hooton, J. Shur, G. S. King et al., An investigation into the relationship between carrier-based dry powder inhalation performance and formulation cohesive???adhesive force balances, European Journal of Pharmaceutics and Biopharmaceutics, vol.69, issue.2, pp.496-507, 2008.
DOI : 10.1016/j.ejpb.2007.11.019

A. H. De-boer, H. K. Chan, and R. Price, A critical view on lactose-based drug formulation and device studies for dry powder inhalation : which are relevant and what interactions to expect ? Advanced drug delivery reviews, pp.257-274, 2012.

J. C. Hooton, M. D. Jones, and R. Price, Predicting the behavior of novel sugar carriers for dry powder inhaler formulations via the use of a cohesive???adhesive force balance approach, Journal of Pharmaceutical Sciences, vol.95, issue.6, pp.1288-1297, 2006.
DOI : 10.1002/jps.20618

P. M. Young, S. Edge, D. Traini, M. D. Jones, R. Price et al., The influence of dose on the performance of dry powder inhalation systems, International Journal of Pharmaceutics, vol.296, issue.1-2, pp.26-33, 2005.
DOI : 10.1016/j.ijpharm.2005.02.004

J. Leyshon, Improving inhaler technique in patients with asthma, Nursing Standard, vol.26, issue.9, pp.49-58, 2011.
DOI : 10.7748/ns.26.9.49.s51

A. H. De-boer, P. Hagedoorn, D. Gjaltema, J. Goede, K. D. Kussendrager et al.,

. Frijlink, Air classifier technology (act) in dry powder inhalation part 2. the effect of lactose carrier surface properties on the drug-to-carrier interaction in adhesive mixtures for inhalation, International journal of pharmaceutics, vol.260, issue.2, pp.201-216, 2003.

N. Islam and E. Gladki, Dry powder inhalers (DPIs)???A review of device reliability and innovation, International Journal of Pharmaceutics, vol.360, issue.1-2, pp.1-11, 2008.
DOI : 10.1016/j.ijpharm.2008.04.044

, BIBLIOGRAPHIE

R. U. Agu, M. I. Ugwoke, M. Armand, R. Kinget, and N. Verbeke, The lung as a route for systemic delivery of therapeutic proteins and peptides, Respiratory research, vol.2, issue.4, p.198, 2001.

P. Muttil, C. Wang, and A. J. Hickey, Inhaled Drug Delivery for Tuberculosis Therapy, Pharmaceutical Research, vol.26, issue.8, pp.2401-2416, 2009.
DOI : 10.1201/9780203912898

I. J. Smith and M. Parry-billings, The inhalers of the future? A review of dry powder devices on the market today, Pulmonary Pharmacology & Therapeutics, vol.16, issue.2, pp.79-95, 2003.
DOI : 10.1016/S1094-5539(02)00147-5

M. P. Timsina, G. P. Martin, C. Marriott, D. Ganderton, and M. Yianneskis, Drug delivery to the respiratory tract using dry powder inhalers, International Journal of Pharmaceutics, vol.101, issue.1-2, pp.1-13, 1994.
DOI : 10.1016/0378-5173(94)90070-1

J. C. Dubus and E. Bosdure, Dernieres avancees concernant les dispositifs d'inhalation. Revue francaise d'allergologie et d'immunologie clinique, pp.38-40, 2006.

B. H. Dickhoff, Adhesive mixtures for powder inhalation : The effect of carrier (surface and bulk) properties, carrier payload and mixing conditions on the performance of adhesive mixtures for inhalation, 2006.

J. N. Staniforth, Performance-Modifying Influences in Dry Powder Inhalation Systems, Aerosol Science and Technology, vol.80, issue.4, pp.346-353, 1995.
DOI : 10.3109/03639048809152038

N. Islam, P. Stewart, I. Larson, and P. Hartley, Effect of carrier size on the dispersion of salmeterol xinafoate from interactive mixtures, Journal of Pharmaceutical Sciences, vol.93, issue.4, pp.1030-1038, 2004.
DOI : 10.1002/jps.10583

N. Stevens, J. Shrimpton, M. Palmer, D. Prime, and B. Johal, Accuracy assessments for laser diffraction measurements of pharmaceutical lactose, Measurement Science and Technology, vol.18, issue.12, p.3697, 2007.
DOI : 10.1088/0957-0233/18/12/004

B. H. Kaye, Permeability techniques for characterizing fine powders, Powder Technology, vol.1, issue.1, pp.11-22, 1967.
DOI : 10.1016/0032-5910(67)80003-2

A. Lecloux, Exploitation des isothermes d'adsorption et de desorption d'azote pour l'etude de la texture des solides poreux, Memoires Societe des Sciences de Liege, pp.169-209, 1971.

D. Cline and R. Dalby, Predicting the quality of powders for inhalation from surface energy and area, Pharmaceutical Research, vol.19, issue.9, pp.1274-1277, 2002.
DOI : 10.1023/A:1020338405947

R. Antila and J. Yliruusi, Measurement of specific surface area of pharmaceutical powders by the bet method : effect of drying time and drying temperature, Acta pharmaceutica nordica, vol.3, issue.1, pp.15-18, 1991.

D. F. Rendle, X-ray diffraction in forensic science, Rigaku J, vol.19, issue.2, pp.11-22, 2003.

G. T. Kokotailo and C. A. Fyfe, Zeolite structure analysis with powder x-ray diffraction and solid-state nmr techniques, Rigaku J, vol.12, issue.3, 1995.

A. J. Edwards, X-ray diffraction procedures for polycrystalline and amorphous materials, 1975.

B. Freudig, S. Hogekamp, and H. Schubert, Dispersion of powders in liquids in a stirred vessel, Chemical Engineering and Processing : Process Intensification, pp.525-532, 1999.
DOI : 10.1016/S0255-2701(99)00049-5

C. Gaiani, J. J. Ehrhardt, J. Scher, J. Hardy, S. Desobry et al., Surface composition of dairy powders observed by X-ray photoelectron spectroscopy and effects on their rehydration properties, Colloids and Surfaces B: Biointerfaces, vol.49, issue.1, pp.71-78, 2006.
DOI : 10.1016/j.colsurfb.2006.02.015

M. J. Calaway and M. D. Fries, Adventitious carbon on primary sample containment metal surfaces, 2015.

S. Kohiki and K. Oki, Problems of adventitious carbon as an energy reference, Journal of Electron Spectroscopy and Related Phenomena, vol.33, issue.4, pp.375-380, 1984.
DOI : 10.1016/0368-2048(84)80032-8

L. S. Johansson, J. M. Campbell, K. Koljonen, and P. Stenius, Evaluation of surface lignin on cellulose fibers with XPS, Applied Surface Science, vol.144, issue.145, pp.92-95, 1999.
DOI : 10.1016/S0169-4332(98)00920-9

T. L. Barr and S. Seal, Nature of the use of adventitious carbon as a binding energy standard, Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, vol.13, issue.3, pp.1239-1246, 1995.
DOI : 10.1116/1.579868

J. E. Castle, The Composition of Metal Surfaces After Atmospheric Exposure: An Historical Perspective, The Journal of Adhesion, vol.35, issue.4, pp.368-388, 2008.
DOI : 10.1016/S0143-7496(98)00068-2

J. E. Devries, L. P. Haack, and P. L. Coduti, Measurement of Carbon on Cold-Rolled Steel: A Comparative Study Using Surface Analytical and Coulometric Methodologies, Industrial & Engineering Chemistry Research, vol.33, issue.11, pp.2618-2630, 1994.
DOI : 10.1021/ie00035a013

L. S. Johansson, Monitoring Fibre Surfaces with XPS in Papermaking Processes, Microchimica Acta, vol.138, issue.3-4, pp.217-223, 2002.
DOI : 10.1007/s006040200025

A. Kurokawa, K. Odaka, Y. Azuma, T. Fujimoto, and I. Kojima, Diagnosis and cleaning of carbon contamination on sio2 thin film, J. Surf. Anal, vol.15, p.337, 2009.

A. Savitzky and M. J. Golay, Smoothing and Differentiation of Data by Simplified Least Squares Procedures., Analytical Chemistry, vol.36, issue.8, pp.1627-1639, 1964.
DOI : 10.1021/ac60214a047

V. Mazet, C. Carteret, D. Brie, I. J. , and B. Humbert, Background removal from spectra by designing and minimising a non-quadratic cost function. Chemometrics and intelligent laboratory systems, pp.121-133, 2005.

J. L. Martin and A. George, Caracerisation experimentale des materiaux, 1998.

X. M. Zeng, G. P. , C. Marriott, and J. Pritchard, The Influence of Crystallization Conditions on the Morphology of Lactose Intended for Use as a Carrier for Dry Powder Aerosols, Journal of Pharmacy and Pharmacology, vol.12, issue.6, pp.633-643, 2000.
DOI : 10.1023/A:1016232230638

, BIBLIOGRAPHIE

J. N. Staniforth, J. E. Rees, F. K. Lai, and J. A. Hersey, Interparticle forces in binary and ternary ordered powder mixes, Journal of Pharmacy and Pharmacology, vol.33, issue.3, pp.141-145, 1982.
DOI : 10.1111/j.2042-7158.1981.tb13845.x

L. Tetard, A. Passian, and T. Thundat, New modes for subsurface atomic force microscopy through nanomechanical coupling, Nature Nanotechnology, vol.67, issue.2, pp.105-109, 2010.
DOI : 10.1143/JJAP.32.L1095

L. Tetard, A. Passian, R. H. Farahi, B. H. Davison, S. Jung et al., Nanometrology of delignified populus using mode synthesizing atomic force microscopy, Nanotechnology, issue.46, p.22465702, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00696022

P. Vitry, E. Bourillot, C. Plassard, Y. Lacroute, L. Tetard et al., Advances in quantitative nanoscale subsurface imaging by mode-synthesizing atomic force microscopy, Applied Physics Letters, vol.105, issue.5
DOI : 10.1121/1.428552

, Applied Physics Letters, vol.105, issue.5, p.53110, 2014.

P. Vitry, E. Bourillot, C. Plassard, Y. Lacroute, E. Calkins et al.,

, Mode-synthesizing atomic force microscopy for 3d reconstruction of embedded low-density dielectric nanostructures, Nano Research, vol.8, issue.7, pp.2199-2205, 2015.

P. Vitry, E. Bourillot, L. Tetard, C. Plassard, Y. Lacroute et al., Mode-synthesizing atomic force microscopy for volume characterization of mixed metal nanoparticles, Journal of Microscopy, vol.77, issue.3, pp.307-311, 2016.
DOI : 10.1103/PhysRevLett.77.5332

P. Vitry, R. Rebois, E. Bourillot, A. Deniset-besseau, M. J. Virolle et al., Combining infrared and mode synthesizing atomic force microscopy: Application to the study of lipid vesicles inside Streptomyces bacteria, Nano Research, vol.8, issue.6, pp.1674-1681, 2016.
DOI : 10.1007/s12274-015-0728-8

D. Sedin and K. L. Rowlen, Influence of tip size on AFM roughness measurements, Applied Surface Science, vol.182, issue.1-2, pp.40-48, 2001.
DOI : 10.1016/S0169-4332(01)00432-9

C. Y. Poon and B. Bhushan, Comparison of surface roughness measurements by stylus profiler, AFM and non-contact optical profiler, Wear, vol.190, issue.1, pp.76-88, 1995.
DOI : 10.1016/0043-1648(95)06697-7

H. Butt, B. Cappella, and M. Kappl, Force measurements with the atomic force microscope : Technique, interpretation and applications. Surface science reports, pp.1-152, 2005.

J. E. Sader, J. W. Chon, and P. Mulvaney, Calibration of rectangular atomic force microscope cantilevers, Review of Scientific Instruments, vol.70, issue.10, pp.3967-3969, 1999.
DOI : 10.1063/1.1144646

C. P. Green, H. Lioe, J. P. Cleveland, R. Proksch, P. Mulvaney et al., Normal and torsional spring constants of atomic force microscope cantilevers, Review of Scientific Instruments, vol.72, issue.6, pp.1988-1996, 2004.
DOI : 10.1063/1.1406934

J. C. Hooton, M. D. Jones, H. Harris, J. Shur, and R. Price, The influence of crystal habit on the prediction of dry powder inhalation formulation performance using the cohesive?adhesive force balance approach. Drug development and industrial pharmacy, pp.974-983, 2008.

R. Price, P. M. Young, S. Edge, and J. N. Staniforth, The influence of relative humidity on particulate interactions in carrier-based dry powder inhaler formulations, International Journal of Pharmaceutics, vol.246, issue.1-2, pp.47-59, 2002.
DOI : 10.1016/S0378-5173(02)00359-9

G. P. Polli, W. M. Grim, F. A. Bacher, and M. H. Yunker, Influence of Formulation on Aerosol Particle Size, Journal of Pharmaceutical Sciences, vol.58, issue.4, pp.484-486, 1969.
DOI : 10.1002/jps.2600580422

J. Mitchell, S. Newman, and H. K. Chan, In vitro and in vivo aspects of cascade impactor tests and inhaler performance: A review, AAPS PharmSciTech, vol.8, issue.4, pp.237-248, 2007.
DOI : 10.1208/pt0804110

A. D. Troise, M. Buonanno, A. Fiore, S. M. Monti, and V. Fogliano, Evolution of protein bound Maillard reaction end-products and free Amadori compounds in low lactose milk in presence of fructosamine oxidase I, Food Chemistry, vol.212, pp.722-729, 2016.
DOI : 10.1016/j.foodchem.2016.06.037

P. M. Young, D. Traini, M. Coates, and H. K. Chan, Recent advances in understanding the influence of composite-formulation properties on the performance of dry powder inhalers, Physica B: Condensed Matter, vol.394, issue.2
DOI : 10.1016/j.physb.2006.12.058

, Physica B : Condensed Matter, vol.394, issue.2, pp.315-319, 2007.

P. M. Young, A. Sung, D. Traini, P. Kwok, H. Chiou et al., Influence of Humidity on the Electrostatic Charge and Aerosol Performance of Dry Powder Inhaler Carrier based Systems, Pharmaceutical Research, vol.7, issue.5, pp.963-970, 2007.
DOI : 10.1007/s11095-006-9218-8

S. K. Tee, C. Marriott, X. M. Zeng, and G. P. Martin, The use of different sugars as fine and coarse carriers for aerosolised salbutamol sulphate, International Journal of Pharmaceutics, vol.208, issue.1-2, pp.111-123, 2000.
DOI : 10.1016/S0378-5173(00)00553-6

V. Naini, P. R. Byron, and E. M. Phillips, Physicochemical stability of crystalline sugars and their spray-dried forms : dependence upon relative humidity and suitability for use in powder inhalers. Drug development and industrial pharmacy, pp.895-909, 1998.