B. Godart, Gestion des ponts en Europe -Projet européen BRIME, Etudes et Recherches des laboratoires des ponts et chaussées, 2005.

M. Pourbaix, Applications of electrochemistry in corrosion science and in practice, Corrosion Science, vol.14, issue.1, pp.25-82, 1974.
DOI : 10.1016/S0010-938X(74)80006-5

Z. Bazant, Physical model for steel corrosion in concrete sea structures theory, Journal of the Structural Division, pp.1137-1166, 1979.

V. Tran, Contribution à la compréhension des mécanismes de dépassivation des armatures d'un béton exposé à l'eau de mer : théorie et modélisation thermochimique, Thèse Ecole Centrale de Nantes, p.130, 2016.

A. Dehoux, Propriétés mécaniques des couches de produits de corrosion à l'interface acier / béton, 2012.

J. Mai-nhu, Corrosion des armatures du béton : couplage carbonatation/chlorures en présence de cycles hydriques, 2013.

C. Alonso, C. Andrade, . Castellote, and P. Castro, Chloride threshold values to depassivate reinforcing bars embedded in a standardized OPC mortar, Cement and Concrete Research, vol.30, issue.7, pp.30-1047, 2000.
DOI : 10.1016/S0008-8846(00)00265-9

S. Caré and A. Raharinaivo, Influence of impressed current on the initiation of damage in reinforced mortar due to corrosion of embedded steel. Cement and Concrete Research, pp.1598-1612, 2007.

U. Angst, B. Elsener, . Larsen, and Ø. Vennesland, Critical chloride content in reinforced concrete ??? A review, Cement and Concrete Research, vol.39, issue.12, pp.39-1122, 2009.
DOI : 10.1016/j.cemconres.2009.08.006

V. Bouteiller, C. Cremona, . Baroghel-bouny, and A. Maloula, Corrosion initiation of reinforced concretes based on Portland or GGBS cements: Chloride contents and electrochemical characterizations versus time, Cement and Concrete Research, vol.42, issue.11, pp.42-1456, 2012.
DOI : 10.1016/j.cemconres.2012.07.004

V. Garcia, Contribution à l'étude du taux de chlorures pour l'amorçage de la corrosion des armatures du béton armé, p.261, 2013.

B. Sanz, Experimental and numerical study of cracking of concrete due to corrosion, p.254, 2014.

T. Bhargava, K. Ghosh, A. Mori, and S. Ramanujam, Swedish Cement and Concrete Research Institute Analytical model for time to cover cracking in RC structures due to rebar corrosion, Nuclear Engineering and Design, issue.1411, pp.236-1123, 1982.

P. François, Influence de la fissuration du béton sur la corrosion des armatures Thèse Université Laval. 16. Bamforth, P, Probabilistic performance based durability design of concrete structures. Management Of Concrete Structures For Long Term Serviceability, pp.33-44, 1997.

M. Otieno, A. Beushausen, and M. , Modelling corrosion propagation in reinforced concrete structures. Cement and Concrete Composites, pp.240-245, 2011.

C. Andrade, . Soler, and X. Novoa, Advances in electrochemiacl impedance measurements in reinforced concrete, Materials Science Forum, pp.192-194, 1995.

K. Suda, . Misra, and K. Motohashi, Corrosion products of reinforcing bars embedded in concrete, Corrosion Science, vol.35, issue.5-8, pp.1543-1549, 1993.
DOI : 10.1016/0010-938X(93)90382-Q

S. Joiret, M. Kedddam, X. R. Novoa, and M. C. Pèrez, Use of EIS, ring-disk electrode, EQCM and Raman spectroscopy to study the film of oxides formed on iron in 1 M NaOH, 1M NaOH. Cement and Concrete Composites, pp.7-15, 2002.
DOI : 10.1016/S0958-9465(01)00022-1

A. Hajjar and H. , Applicabilite et efficacite d'une protection galvanique aux aciers de précontrainte, p.228, 2008.

L. Freire and X. Novoa, Study of passive films formed on mild steel in alkaline media by the application of anodic potentials, Materials Chemistry and Physics, vol.114, issue.2-3, pp.962-972, 2009.
DOI : 10.1016/j.matchemphys.2008.11.012

A. Poursaee and C. Hansson, Reinforcing steel passivation in mortar and pore solution. Cement and Concete Research, pp.1127-1133, 2007.

A. Nasser, La corrosion des aciers dans le béton à l'état passif et par carbonatation : Prise en compte des courants galvaniques et des défauts d'interface acier ? béton, Thèse de l'université de Toulouse III-Paul Sabatier, p.226, 2010.

F. Deby, Rapport de synthèse sur la prédiction de la diffusion ionique, p.15, 2010.

F. Deby, Rapport de synthèse sur les mesures de migration des chlorures, p.21, 2010.

S. Ahmad, Reinforcement corrosion in concrete structures, its monitoring and service life prediction??a review. Cement and Concrete Composites, pp.4-5, 2003.

L. Hostis and V. Benchmark-des-poutres-de-la-rance, Revue européenne de génie civil, Lavoisier, vol.11, 0255.

L. Hostis and C. Emptaz, Durée de vie des ouvrages : Approche Prédictive Performantielle et probabiliste, pp.3-5

T. Liu and R. Weyers, Modeling the Dynamic Corrosion Process in Chloride Contaminated Concrete Structures, Cement and Concrete Research, vol.28, issue.3, pp.365-379, 1998.
DOI : 10.1016/S0008-8846(98)00259-2

Y. Zhao, J. Yu, J. Wu, and W. , Critical thickness of rust layer at inner and out surface cracking of concrete cover in reinforced concrete structures, Corrosion Science, vol.59, issue.59, pp.316-323, 2012.
DOI : 10.1016/j.corsci.2012.03.018

A. Michel, B. Pease, A. Peterová, M. Geiker, and T. Stang, Penetration of corrosion products and corrosion-induced cracking in reinforced cementitious materials: Experimental investigations and numerical simulations, Cement and Concrete Composites, vol.47, pp.47-75, 2014.
DOI : 10.1016/j.cemconcomp.2013.04.011

C. Alonso, . Andrade, and J. Rodriguez, Factors controlling cracking of concrete affected by reinforcement corrosion, Materials and Structures, vol.86, issue.4, pp.31-435, 1998.
DOI : 10.1680/iicep.1989.1628

Y. Choi, S. Yi, M. Kim, . Jung, and E. Yang, Effect of corrosion method of the reinforcing bar on bond characteristics in reinforced concrete specimens, Construction and Building Materials, vol.54, pp.180-189, 2014.
DOI : 10.1016/j.conbuildmat.2013.12.065

V. Bouteiller, . Marie-victoire, and C. Cremona, Mathematical relation of steel thickness loss with time related to reinforced concrete contaminated by chlorides, Construction and Building Materials, vol.124, pp.764-75, 2016.
DOI : 10.1016/j.conbuildmat.2016.07.078
URL : https://hal.archives-ouvertes.fr/hal-01361186

V. Ramachandran, Hydration of cement ? role of triethanolamine. Cement and Concrete Research, pp.623-631, 1976.

R. Francois, . Arliguie, and D. Bardy, Ministère de l'Ecologie, du Développement Durable, des Transports et du Logement Electrode potential measurements of concrete reinforcement for corrosion evaluation, Rapport : Altération du béton en site maritime, pp.70-94, 1994.

U. Mohammed, . Otsuki, and M. Hisada, Corrosion of steel bars respect to orientation in concrete, ACI Materials Journal, vol.96, issue.2, pp.154-159, 1999.

C. Li, Corrosion initiation of reinforcing steel in concrete under natural salt spray and service loading -results and analysis, ACI Materials Journal, vol.97, issue.6, pp.690-697, 2000.

S. Yoon, K. Wang, . Weiss, and S. Shah, Interaction between loading, Corrosion, and Serviceability of reinforced concrete, ACI Materials Journal, issue.6, pp.97-637, 2000.

L. Bescop, P. Adenot, F. Galle, and P. Lovera, Dégradation des matériaux à base de liants hydrauliques en milieu saturé-Application au comportement à long terme des colis, 2000.

T. Vidal, . Castel, and R. François, Corrosion process and structural performance of a 17 year old reinforced concrete beam stored in chloride environment, Cement and Concrete Research, vol.37, issue.11, pp.37-1551, 2007.
DOI : 10.1016/j.cemconres.2007.08.004

C. Li, Initiation of Chloride-Induced Reinforcement Corrosion in Concrete Structural Members - Experimentation, ACI Structural Journal, vol.98, issue.4, pp.502-510, 2001.

A. Castel, T. Vidal, . Francois, and G. Arliguie, Influence of steel???concrete interface quality on reinforcement corrosion induced by chlorides, Magazine of Concrete Research, pp.151-159, 2003.
DOI : 10.1680/macr.2003.55.2.151

E. Maaddawy and K. Soudki, Effectiveness of Impressed Current Technique to Simulate Corrosion of Steel Reinforcement in Concrete, Journal of Materials in Civil Engineering, vol.15, issue.1, pp.41-47, 2003.
DOI : 10.1061/(ASCE)0899-1561(2003)15:1(41)

C. Andrade and C. Alonso, Test methods for on-site corrosion rate measurement of steel reinforcement in concrete by means of the polarization resistance method, Materials and Structures, vol.1, issue.5, pp.623-643, 2004.
DOI : 10.5006/0010-9312-29.10.403

B. Richard, M. Quiertant, V. Bouteiller, L. Adelaide, . Tailhan et al., Influence of accelerated corrosion on the reinforced cover concrete cracking behavior: experimental and numerical study, European Journal of Environmental and Civil Engineering, vol.102, issue.3-4, pp.2012-2028
DOI : 10.1061/(ASCE)0733-9445(2009)135:4(376)
URL : https://hal.archives-ouvertes.fr/hal-00852365

V. Bouteiller, C. Toque, A. Cury, J. Cherrier, . Diday et al., Non-destructive electrochemical characterizations of reinforced concrete corrosion: basic and symbolic data analysis, Corrosion Reviews, vol.30, issue.1-2, pp.1-2, 2012.
DOI : 10.1515/corrrev-2011-0029
URL : https://hal.archives-ouvertes.fr/hal-00857551

V. Bouteiller and L. , Jérôme Durée de vie des ouvrages : Approche Prédictive Performantielle et probabiliste : Faisabilité d'une corrosion accélérée sur des poutrelles en béton armé et Dimensionnement par calculs éléments finis d'un essai de fluage d'une poutre en flexion 4 points, 2010.

. Ferrigno, Coplanar interdigitated band electrodes for electrosynthesis, 1999.

F. Wenger, Etude de la corrosion de l'acier doux dans le béton par des méthodes électrochimiques. Application au contrôle des ouvrages de génie civil, 1986.

B. Elsener and R. Tc, Hall-cell potential measurements???Potential mapping on reinforced concrete structures, Materials and Structures, vol.111, issue.112, pp.461-71, 2003.
DOI : 10.1520/STP25021S

O. Poupard, Corrosion by chlorides in reinforced concrete: Determination of chloride concentration threshold by impedance spectroscopy, Cement and Concrete Research, vol.34, issue.6, pp.991-1000, 2004.
DOI : 10.1016/j.cemconres.2003.11.009

G. John and P. Searson, Use of AC Impedance Technique in Studies on Steel in Concrete in Immersed Conditions, British Corrosion Journal, vol.16, issue.2, pp.102-106, 1981.
DOI : 10.1179/000705976798320070

D. Macdonald, M. Kuber, D. Urquidi-macdonald, and M. , Theoretical assesssment of AC impedance spectroscopy for detecting corrosion of rebar in reinforced concrete. National Association of Corrosion Engineers, 1988.

M. Keddam, X. R. Novoa, L. Soler, . Andrade, and H. Takenouti, An equivalent electrical circuit of macrocell activity in facing electrodes embedded in cement mortar, Corrosion Science, vol.36, issue.7, pp.36-1155, 1994.
DOI : 10.1016/0010-938X(94)90140-6

L. Dhouibi, E. Triki, . Grandet, and A. Raharinaivo, Comparing the steel-concrete interface state and its electrochemical impedance. Cement and Concrete Research, pp.253-266, 1996.

M. Stern and A. Geary, Electrochemical Polarization, Journal of The Electrochemical Society, vol.104, issue.1, pp.56-63, 1957.
DOI : 10.1149/1.2428496

A. Millard, V. Hostis, . Beddiar, S. Care, and R. , Modelling the cracking of a reinforced concrete structure submitted to corrosion of steels-first validation of a damage model based on experimental results, p.12, 2004.

L. Abosrra, . Ashour, and M. Youseffi, Corrosion of steel reinforcement in concrete of different compressive strengths, Construction and Building Materials, vol.25, issue.10, pp.25-3915, 2011.
DOI : 10.1016/j.conbuildmat.2011.04.023

G. Al-sulaimani, M. Kallemullah, . Basunbul, and Z. Rasheeduz, Influence of corrosion and cracking on bond behaviour and strength of reinforced concrete members, ACI Structural Journal, vol.87, issue.2, 1990.

B. Sanz, S. Planas, and M. José, An experimental and numerical study of the pattern of cracking of concrete due to steel reinforcement corrosion, Engineering Fracture Mechanics, vol.114, pp.26-41, 2013.
DOI : 10.1016/j.engfracmech.2013.10.013

E. Moreno, Mathematical models to predict the mechanical behavior of reinforcements depending on their degree of corrosion and the diameter of the rebars, Construction and Building Materials, vol.61, pp.156-163, 2014.
DOI : 10.1016/j.conbuildmat.2014.03.003

H. S. Lee, F. Tomosawa, . Masuda, and T. Kage, Effects of CFRP sheets on flexural strengthening of RC beams damaged by corrosion of tension rebar, Engineering Materials and technology, pp.348-349, 1997.

C. Andrade and C. Alonso, Corrosion rate monitoring in the laboratory and on-site, Construction and Building Materials, pp.315-328, 1996.
DOI : 10.1016/0950-0618(95)00044-5

C. Lu, J. Liu, and R. , Reinforcement corrosion-induced cover cracking and its time prediction for reinforced concrete structures, Corrosion Science, vol.53, issue.4, pp.1337-1347, 2011.
DOI : 10.1016/j.corsci.2010.12.026

C. Andrade, A. Molina, and F. , Cover cracking as a function of bar corrosion: Part I-Experimental test, Materials and Structures, vol.86, issue.8, pp.453-464, 1993.
DOI : 10.1680/iicep.1989.1628

J. Rodriguez, L. M. Ortega, and A. Garcia, M, Assessment of structural elements with corroded reinforcement, in Corrosion and corrosion protection of steel in concrete, pp.171-185, 1994.

S. Caré and . Hdr, Effets mecaniques de la corrosion des armatures dans les structures du béton armée, pp.59-80, 2007.

A. Jamali, U. Angst, . Adey, and B. Elsener, Modeling of corrosion-induced concrete cover cracking: A critical analysis, Construction and Building Materials, vol.42, pp.225-237, 2013.
DOI : 10.1016/j.conbuildmat.2013.01.019

R. Aveldaño and N. Ortega, Characterization of concrete cracking due to corrosion of reinforcements in different environments, Construction and Building Materials, vol.25, issue.2, pp.630-637, 2011.
DOI : 10.1016/j.conbuildmat.2010.07.029

A. Almusallam, A. Gahtani, A. Rauf, A. Dakhill, and Z. Rasheeduz, Effect of Reinforcement Corrosion on Flexural Behavior of Concrete Slabs, Journal of Materials in Civil Engineering, vol.8, issue.3, pp.123-127, 1996.
DOI : 10.1061/(ASCE)0899-1561(1996)8:3(123)

C. Fang and K. Lundgren, Corrosion influence on bond in reinforced concrete. Cement and Concrete Reasearch, pp.2159-2167, 2004.

I. Yoon, . Çopuro?lu, . O?uzhan, and K. Park, Effect of global climatic change on carbonation progress of concrete, Atmospheric Environment, vol.41, issue.34, pp.41-7274, 2007.
DOI : 10.1016/j.atmosenv.2007.05.028

R. Weyers and B. Prowell, Corrosion inhibiting repair and rehabilitation treatment process for reinforced concrete structures. Cement and Concrete Composites, p.459, 1996.

P. K. Mehta and P. Monteiro, Concrete : Microstructures, properties and materials, pp.653-79, 1997.

C. Andrade, A. Molina, and F. J. , Cover cracking as a function of bar corrosion: Part I-Experimental test, Materials and Structures, vol.86, issue.8, pp.453-464, 1993.
DOI : 10.1680/iicep.1989.1628

F. J. Molina, A. Andrade, and C. , Cover cracking as a function of rebar corrosion: Part 2???Numerical model, Materials and Structures, vol.6, issue.9, pp.532-548, 1993.
DOI : 10.1007/BF02472864

J. Walton and B. Sagar, A corrosion model for nuclear waste containers, pp.271-282, 1987.

K. Vu, . Stewart, and J. Mullard, Corrosion-induced cracking: Experimenatl data and predictive models, ACI Structural Journal, vol.102, issue.5, pp.719-726, 2005.

A. Michel, B. Pease, M. Geiker, . Stang, and J. Olsen, Monitoring reinforcement corrosion and corrosion-induced cracking using non-destructive x-ray attenuation measurements, Cement and Concrete Research, vol.41, issue.11, pp.41-1085, 2011.
DOI : 10.1016/j.cemconres.2011.06.006

K. Bhargava, A. K. Ghosh, . Mori, and S. Ramanujam, Model for cover cracking due to rebar corrosion in RC structures. Engineering Structures, pp.28-1093, 2006.

S. Caré, Q. T. Nguyen, V. L-'hostis, and Y. Berthaud, Mechanical properties of the rust layer induced by impressed current method in reinforced mortar, Cement and Concrete Research, vol.38, issue.8-9, pp.38-46, 2008.
DOI : 10.1016/j.cemconres.2008.03.016

Q. Nguyen, S. Caré, . Millard, and Y. Berthaud, Analyse de la fissuration du béton armé en corrosion accélérée. Comptes Rendus Mécanique, pp.99-104, 2007.
DOI : 10.1016/j.crme.2007.01.005

L. Hostis, V. Foct, and P. Dillmann, Corrosion behaviour of reinforced concrete: Laboratory experiments and archaeological analogues for long-term predictive modelling, Journal of Nuclear Materials, vol.379, pp.1-3, 2008.

K. Suda, . Misra, and K. Motohashi, Corrosion products of reinforcing bars embedded in concrete, Corrosion Science, vol.35, issue.5-8, pp.5-8, 2011.
DOI : 10.1016/0010-938X(93)90382-Q

Y. Yoshioka and T. Yonezawa, Fundamental investigation on mechanical properties of reinforcement corrosion products, 37 th Annual Meeting of the JSCE, 1990.

B. Pease, A. Michel, . Thybo, and H. Stang, Estimation of elastic modulus of reinforcement corrosion products using inverse analysis of digital image correlation meausurement for input in corrosion-induced cracking model, 6th International Conference on Bridge Maintenance, 2012.

B. ?avija, M. Lukovic, and S. Pacheco, Cracking of SHCC due to reinforcement corrosion, Proceedings of the 9th International Conference on Fracture Mechanics of Concrete and Concrete Structures
DOI : 10.21012/FC9.118

M. Dekoster, Etude du comportement mécanique des structures en béton armé dégradé par la corrosion, 2003.

J. Cairns and S. Millard, Reinforcement corrosion and its effect on residual strength of concrete structures, th International Conference Structural Faults+Repair-99, 1999.

Y. G. Du, A. H. Chan, and L. A. Clark, Finite element analysis of the effects of radial expansion of corroded reinforcement. Computers and Structures, pp.917-929, 2006.

D. Qiao, H. Nakamura, . Yamamoto, and T. Miura, Crack patterns of concrete with a single rebar subjected to non-uniform and localized corrosion, Construction and Building Materials, vol.116, issue.116, pp.366-377, 2016.
DOI : 10.1016/j.conbuildmat.2016.04.149

T. Tsutsumi, M. Matsushima, . Murakami, and H. Seki, Study on Crack Models Caused by Pressure Due to Corrosion Products., Doboku Gakkai Ronbunshu, issue.532, pp.159-166, 1996.
DOI : 10.2208/jscej.1996.532_159

K. Zhou, . Martin-pérez, and Z. Lounis, Finite element analysis of corrosion-induced cracking, spalling and delamination of RC bridge decks, 1st Canadian Conference on Effective Design of Structures McMaster University, pp.187-96, 2005.

A. Borosnyoi and I. Snobli, Crack width variation within the concrete cover of reinforced concrete members, Epitoanyag - Journal of Silicate Based and Composite Materials, vol.62, issue.3, pp.70-74, 2010.
DOI : 10.14382/epitoanyag-jsbcm.2010.14

S. Caré, Q. Nguyen, . Beddiar, and Y. Berthaud, Times to cracking in reinforced mortar beams subjected to accelerated corrosion tests, Materials and Structures, vol.11, issue.7???8, pp.107-124, 2010.
DOI : 10.1016/j.cemconres.2005.06.007

Y. Zhao, X. Zhang, J. Ding, and W. , Non-uniform distribution of a corrosion layer at a steel/concrete interface described by a Gaussian model, Corrosion Science, vol.112, 2016.
DOI : 10.1016/j.corsci.2016.06.021

Q. Nguyen, . Caré, and Y. Berthaud, Experimental and numerical behaviour of rienforced mortar plates subjected to accelerated corrosion. Numerical and Analytical Methods in Geomechanics, pp.35-1141, 2011.

A. Torre-casanova, A steel-concrete bond model for the simulation of industrial structures, Laboratoire de Mécanique et Technologie 2012
URL : https://hal.archives-ouvertes.fr/tel-00777204

G. Rehm, The fundamental law of bond in RILEM-Symposium on Bond and Crack Formation in Reinforced Concrete, pp.491-498, 1958.

L. A. Lutz and P. Gergely, Mechanics of bond and slip of deformed bars in concrete ACI Structural Journal, pp.711-721, 1967.

A. Tixier, Analyse du comportement de l'interface acier-béton par essai push-in Mesures par fibres optiques et modélisation par éléments finis, p.197, 2006.

R. Dominguez, Etude de la liaison acier-béton: de la modélisation du phénomène à la formulation d'un élément fini enrichi 'béton armé, Thèse ENS Cachan, p.227, 2005.

T. Phan, Numerical modelisation of steel-concrete interface : application to the behaviour of concrete structures reinforced by the ribbed flat steel, Laboratoire de Modélisation et Simulation Multi Echelle (MSME). 2012
URL : https://hal.archives-ouvertes.fr/tel-00788282

R. Fip, Tests and specifications of reinforcements for reinforced and prestressed concrete, pp.169-178, 1970.

B. Banholzer, . Brameshuber, and W. Jung, Analytical evaluation of pull-out tests?the inverse problem. Cement and Concrete Composites, pp.564-571, 2006.

A. Bingöl and R. Gül, Residual bond strength between steel bars and concrete after elevated temperatures, Fire Safety Journal, vol.44, issue.6, pp.854-859, 2009.
DOI : 10.1016/j.firesaf.2009.04.001

Z. Huang, Modelling the bond between concrete and reinforcing steel in a fire. Engineering Structures, pp.32-3660, 2010.

S. Tastani, Experimental evaluation of the direct tension -pullout bond test, Bond in Concrete, 2002.

A. Baltov, Zones de sécurité en cas de détérioration de la liaison acier-béton d'une structure en béton armé, pp.36-42, 2010.

S. Hong and S. Park, Uniaxial Bond Stress-Slip Relationship of Reinforcing Bars in Concrete, Advances in Materials Science and Engineering, vol.132, issue.550, p.12
DOI : 10.3151/jact.6.443

R. Eligehausen, . Popov, and V. Bertero, Local bond stress slip relationships of deformed bars under generalized excitations, 1983.

J. Zuo and D. Darwin, Bond slip of high relative rib area bars under cyclic loading, ACI Structural Journal, issue.297, pp.331-334, 2000.

G. Rehm, The basic principle of bond between steel and concrete. Deutcher Ausschuss fur stahlbetom, p.66, 1961.

P. G. Gambarova and G. Rosati, Bond and splitting in bar pull-out: behavioural laws and concrete cover role, Magazine of Concrete Research, vol.49, issue.179, pp.99-110, 1997.
DOI : 10.1680/macr.1997.49.179.99

G. Belaid, . Arliguie, and R. Franc¸ois, Effect of Bars Properties on Bond Strength of Galvanized Reinforcement, Journal of Materials in Civil Engineering, vol.13, issue.6, pp.454-458, 2001.
DOI : 10.1061/(ASCE)0899-1561(2001)13:6(454)

A. Ouglova, Etude du comportement mécanique des structures en béton armé atteintes part la corrosion, Thèse ENS Cachan, p.147, 2004.

N. Pinoteau, Comportement ds scellements chimiques d'armatures rapportées pour béton en situation d'incendie. 2013, Thèse Mines Douai. p. 178. 126. Viawanthanatepa, S, Bond deterioration of reinforced bars embedded in confined concrete blocks, 1979.

A. Daoud, Etude expérimentale de la liaison entre l'acier et le béton autoplaçant: contibution à la modélisation numérique de l'interface, 2003.

Y. Goto, Cracks formed in concrete around deformed tension bars ACI Journal, pp.244-251, 1971.

J. Clément, Interface acier-béton et comportement des structures en béton armé : caractérisation-modélisation, Thèse ENS Cachan, 1987.

P. S. Mangat and M. S. Elgarf, Bond characteristics of corrding reinforcement in concrete beams, Materials and Structures, vol.57, issue.9, pp.89-97, 1999.
DOI : 10.1007/BF02479434

. Castel, A Couplage mécanique et corrosion dans les éléments de béton armé, 2001.

J. G. Cabrera and P. Ghoddousi, The effect of reinforcement corrosion on the strength of the steel/concrete bond, in Bond in Concrete-from research to practice, pp.10-11, 1992.

D. Val, R. Mark, and E. M. , Effect of reinforcement corrosion on reliability of highway bridges. Engineering Structures, pp.1010-1019, 1998.

B. Richard, Comportement des éléments de structures en béton armé dégradés par corrosion, la problématique de la modélisation de l'interface acier/béton en présence de corrosion, 2010.

J. Cabrera, Deterioration of concrete due to reinforcement steel corrosion. Cement and Concrete Composites, pp.47-59, 1996.

T. Uomoto and S. Mirsa, Behaviour of concrete beams and columns in marine environment when corrosion of reinfocing bars take place, ACI Journal, vol.109, pp.127-145, 1998.

A. Castel, . François, and A. Ginette, Mod??le de comportement m??canique du b??ton arm?? corrod??, Comptes Rendus M??canique, vol.330, issue.1, pp.45-50, 2002.
DOI : 10.1016/S1631-0721(02)01428-6

J. Rodriguez, L. M. Ortega, . Munoz, and A. Garcia, M, Corrosion des armatures et durée de service des construction en béton, in CEFRACOR, 1995.

H. S. Lee, . Tomosawa, and T. Noguchi, Fundamental study on avaluation of structural performance of reinforced concrete beam damaged by corrosion of longitudinal tensile main rebar by finite element method. Structural and Construction Engineering, pp.43-50, 1998.

J. Rodriguez, L. M. Ortega, and J. Casal, Load carrying capacity of concrete structures with corroded reinforcement, Construction and Building Materials, vol.11, issue.4, pp.239-248, 1997.
DOI : 10.1016/S0950-0618(97)00043-3

J. Cairns, . Du, D. Law, and . Law, Influence of corrosion on the friction characteristics of the steel/concrete interface, Construction and Building Materials, vol.21, issue.1, pp.190-197, 2007.
DOI : 10.1016/j.conbuildmat.2005.06.054

C. Laborderie and G. Pijaudier-cabot, Etude expérimentale des matériaux renforcésdétermination des lois de comportement de l'interface fibre/béton, 1987.

T. Soylev and R. Francois, Effects of Bar-Placement Conditions on Steel-Concrete Bond, Materials and Structures, vol.86, issue.2, pp.211-220, 2006.
DOI : 10.1617/s11527-005-9030-7

V. Papadakis, . Vayenas, and M. Fardis, Fundamental modeling and experimental investigation of concrete carbonation, ACI Materials Journal, pp.363-373, 1991.

M. Thiery, Modélisation de la carbonatation atmosphérique des matériaux cimentaires: prise en compte des effets cinétiques et des modifications microstructurales et hydriques, Thèse ENPC, p.331, 2005.

A. Lindvall, Probabilistic performance based durability design of concrete structures, in Civil Engineering, p.10, 1998.

T. Maruya and T. Hsu, H Numerical modelling of steel corrosion in concrete structures due to chloride ion, oxygen and water movement. Advanced Concrete Technology, pp.147-160, 2003.

Y. Yuan, J. , and Y. , Modeling corroded section configuration of steel bar in concrete structure, Construction and Building Materials, vol.23, issue.6, pp.2461-2466, 2009.
DOI : 10.1016/j.conbuildmat.2008.09.026

X. Zhang, X. Wang, . Lu, and F. Xing, Analytic model of non-uniform corrosion induced cracking of reinforced concrete structure, Journal of Central South University of Technology, vol.20, issue.4, pp.940-945, 2011.
DOI : 10.1016/S0167-4730(97)00021-0

Y. Zhao, B. Hu, Y. , J. , and W. , Non-uniform distribution of rust layer around steel bar in concrete, Corrosion Science, vol.53, issue.12, pp.53-4300, 2011.
DOI : 10.1016/j.corsci.2011.08.045

X. Du, J. Zhang, and R. , Modeling the cracking of cover concrete due to non-uniform corrosion of reinforcement, Corrosion Science, vol.89, pp.189-202, 2014.
DOI : 10.1016/j.corsci.2014.08.025

L. Jin, R. Zhang, . Du, and Y. Li, Investigation on the cracking behavior of concrete cover induced by corner located rebar corrosion, Engineering Failure Analysis, vol.52, pp.129-143, 2015.
DOI : 10.1016/j.engfailanal.2015.03.019

Y. Liu and R. Weyers, Modelling the time to corrosion cracking in chloride contaminated reinforced concret structures, ACI Materials Journal, vol.95, issue.6, pp.675-681, 1998.

E. J. Hansen and V. Saouma, Numerical simulation of reinforced concrete deterioration: Part II-Steel corrosion and concrete cracking, ACI Materials Journal, vol.96, pp.331-338, 1999.

K. Vu and M. Stewart, Structural reliability of concrete bridges including improved chlorideinduced corrosion models. Structural Safety, pp.313-333, 2000.

K. K. Tran, H. Nakamura, . Kawamura, and M. Kunieda, Analysis of crack propagation due to rebar corrosion using RBSM. Cement and Concrete Composites, pp.906-917, 2011.

X. Du and L. Jin, Meso-scale numerical investigation on cracking of cover concrete induced by corrosion of reinforcing steel, Engineering Failure Analysis, vol.39, pp.21-33, 2014.
DOI : 10.1016/j.engfailanal.2014.01.011

A. Acosta and A. Sagues, Concrete cover cracking with localized corrosion of reinforcing steel. Durability of Concrete, p.338, 2000.

P. Lazar and . Gerard, Mechanical behaviour of corrosion products formed at the steelconcrete interface, 14th Engineering Mechanics Conference, 2000.

E. Maaddawy, T. E. Soudki, and K. , A model for prediction of time from corrosion initiation to corrosion cracking. Cement and Concrete Composites, 2007.

T. Vidal, . Casal, and R. François, Analyzing crack width to predict corrosion in reinforced concrete. Cement and Concrete Reasearch, pp.165-174, 2004.

I. Khan, . François, and A. Castel, Prediction of reinforcement corrosion using corrosion induced cracks width in corroded reinforced concrete beams, Cement and Concrete Research, vol.56, issue.56, pp.84-96, 2014.
DOI : 10.1016/j.cemconres.2013.11.006

R. Zhang, . Castel, and R. François, Concrete cracking due to chloride-induced reinforcement corrosion ??? influence of steel???concrete interface defects due to the ???top-bar effect???, European Journal of Environmental and Civil Engineering, vol.40, issue.3-4, pp.402-413, 2012.
DOI : 10.1016/j.cemconres.2009.09.026

. Zhu, R. François, S. Poon, C. Dai, and J. , Influences of corrosion degree and corrosion morphology on the ductility of steel reinforcement, Construction and Building Materials, vol.148, issue.148, pp.297-306, 2017.
DOI : 10.1016/j.conbuildmat.2017.05.079

S. C. Ting and A. Nowak, Effect of reinforcing steel area loss on flexural behavior of reinforced concrete beams, ACI Structural Journal, vol.88, pp.309-314, 1991.

R. Capozzucca, Damage to reinforced concrete due to reinforcement corrosion, Construction and Building Materials, pp.295-303, 1995.
DOI : 10.1016/0950-0618(95)00033-C

X. Wang and X. Liu, Bond strength modeling for corroded reinforcements, Construction and Building Materials, pp.177-186, 2006.
DOI : 10.1016/j.conbuildmat.2005.01.015

S. Pantazopoulou and K. Papoulia, Modeling Cover-Cracking due to Reinforcement Corrosion in RC Structures, Journal of Engineering Mechanics, vol.127, issue.4, pp.342-351, 2001.
DOI : 10.1061/(ASCE)0733-9399(2001)127:4(342)

K. Bhargava, A. Ghosh, . Mori, and S. Ramanujam, Analytical model for time to cover cracking in RC structures due to rebar corrosion, Nuclear Engineering and Design, vol.236, issue.11, pp.1123-1139, 2006.
DOI : 10.1016/j.nucengdes.2005.10.011

C. Li, . Melchers, and J. Zheng, Analytical model for corrosion-induced crack width in reinforced concrete structures, ACI Structural Journal, issue.4103, pp.479-487, 2006.

A. Firouzi and R. , A, Prediction of extent and liklihood of corrosion-induced cracking in reinforced concrete bridge decks. Structural Engineering, 2010.

L. Chernin, . Val, and K. Volokh, Analytical modelling of concrete cover cracking caused by corrosion of reinforcement, Materials and Structures, vol.40, issue.5, pp.543-556
DOI : 10.1680/macr.2002.54.3.215

G. Malumbela, A. Moyo, and P. , Model for cover cracking of RC beams due to partial surface steel corrosion, Construction and Building Materials, vol.25, issue.2, pp.987-991, 2011.
DOI : 10.1016/j.conbuildmat.2010.06.081

Y. Zhao, Y. , J. , and W. , Damage analysis and cracking model of reinforced concrete structures with rebar corrosion, Corrosion Science, issue.10, pp.53-3388, 2011.

Y. Zhao, Y. , J. , and W. , Damage analysis and cracking model of reinforced concrete structures with rebar corrosion, Corrosion Science, pp.2011-53

M. Suidan, . Schnobrich, and . Wc, Finite element analysis of reinforced concrete. Structural Division, pp.2109-2122, 1973.

A. Hillerborg, Numerical method to simulate softening and fracture of concrete. Fracture Mechanics of Concrete, 1984.

D. Ngo, . Scordelis, and . Ac, Finite element analysis of reinforced concrete beams, ACI Journal, vol.64, pp.152-163, 1967.

J. Blaauwendraad, H. J. Grootenboer, and R. , Essentials for discrete crack analysis, in Advanced Mechanics of Reinforced Concrete, pp.245-259, 1981.

T. Belytschko and T. Black, Elastic crack growth in finite elements with minimal remeshing, International Journal for Numerical Methods in Engineering, vol.55, issue.5, pp.601-620, 1999.
DOI : 10.1115/1.3173676

K. Lundgren, Bond between corroded reinforcement and concrete, 2001.

M. Nguyen, D. Bary, and T. Larrad, Coupled carbonation-rust formation-damage modeling and simulation of steel corrosion in 3D mesoscale reinforced concrete, Cement and Concrete Research, vol.74, pp.95-107, 2015.
DOI : 10.1016/j.cemconres.2015.04.008
URL : https://hal.archives-ouvertes.fr/hal-01738407

B. ?avija, M. Lukovi?, . Pacheco, and E. Schlangen, Cracking of the concrete cover due to reinforcement corrosion: A two-dimensional lattice model study, Construction and Building Materials, vol.44, issue.44, pp.626-638, 2013.
DOI : 10.1016/j.conbuildmat.2013.03.063

B. S. Jang and B. H. Oh, Effects of non-uniform corrosion on the cracking and service life of reinforced concrete structures, Cement and Concrete Research, vol.40, issue.9, pp.1441-1450, 2010.
DOI : 10.1016/j.cemconres.2010.03.018

Y. Zhao, A. Karimi, H. Wong, B. Hu, J. Buenfeld et al., Comparison of uniform and nonuniform corrosion induced damage in reinforced concrete based on a Gaussian description of the corrosion layer, Corrosion Science, issue.9, pp.53-2803, 2011.

T. Pan and Y. Lu, Stochastic Modeling of Reinforced Concrete Cracking due to Nonuniform Corrosion: FEM-Based Cross-Scale Analysis, Journal of Materials in Civil Engineering, vol.24, issue.6, pp.24-698, 2012.
DOI : 10.1061/(ASCE)MT.1943-5533.0000427

C. Cao and M. Cheung, Non-uniform rust expansion for chloride-induced pitting corrosion in RC structures, Construction and Building Materials, vol.51, pp.75-81, 2014.
DOI : 10.1016/j.conbuildmat.2013.10.042

C. Fischer, Beitrag zu den Auswirkungen der Bewehrungsstahlkorrosion auf den Verbund zwischen Stahl und Beton, 2012.

V. Vliet and V. Mier, Strain softening behaviour of concrete in uniaxial compression, in Size- Scale Effects in the Failure Mechanisms of Materials and Structures, 0190.

J. G. Van-mier and A. Vervuurt, Numerical analysis of interface fracture in concrete using a lattice-type fracture model. Damage Mechanics, pp.408-432, 1997.

B. Richard, M. Quiertant, V. Bouteiller, A. Delaplace, L. Adelaide et al., Experimental and numerical analysis of corrosion-induced cover cracking in reinforced concrete sample. Computers and Concrete, pp.421-439, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01500827

V. Bouteiller, J. Lombart, and F. D. , une corrosion accélérée sur des poutrelles en béton armé et dimensionnement par calculs éléments finis d'un essai de fluage d'une poutre en flexion 4 points, p.61, 2010.

A. Pavoine, . Harbec, and T. Chaussadent, Impact of Alternative Cementitious Material on Mechanical ???and Transfer Properties of Concrete, ACI Materials Journal, vol.111, issue.3, p.12, 2014.
DOI : 10.14359/51686828
URL : https://hal.archives-ouvertes.fr/hal-01004231

F. Dabosi, B. Baroux, C. Corrosion-localisée, K. Lundgren, . Chen et al., Corrosion influence on bond in reinforced concrete, Cement and Concrete Research, issue.11, pp.34-2159, 2004.

L. Chavez, E. Alonso, W. Martínez, M. Graff, and J. Artega, Prediction of the static modulus of elasticity using four non destructive testing, Journal of Construction, vol.13, issue.1, 2014.

P. Banea, Study of electrical resistivity of mature concrete 2015, p.105

I. Côté and R. , Adsorption du phosphate sur desoxyhydroxydes de fer 1996, INRS Eau, p.77

S. Reguer, Phases chlorées sur les objets archéologiques ferreux corrodés dans les sols : caractérisations et mécanismes de formation, p.330, 2005.

L. Cui and P. Yan, An algorithm of galvanostatic pulse method to determine the corrosion status of reinforcement in concrete, Corrosion Science, vol.42, issue.4, pp.675-686, 2000.

K. Habib, Measurement of volume resistivity/conductivity of metallic alloy in inhibited seawater by optical interferometry techniques, Review of Scientific Instruments, vol.82, issue.3, p.82, 2011.
DOI : 10.1002/3527602097.ch1

E. R. Morris and Q. Williams, Electrical resistivity of Fe304 to 48 GPa: Compression-induced changes in electron hopping at mantle pressure, Geophysical Research, vol.102, pp.139-148, 1997.

V. Baroghel-bouny, G. Villain, . Thiery, T. Chaussadent, and L. , Durabilité du béton armé et de ses constituants : maîtrise et approche performantielle, 2006.

C. Andrade, C. Alonso, and R. Tc, 154-EMC:Electrochemical Techniques for Measuring Metallic Corrosion -Recommendations -Test methods for on-site corrosion rate measurement of steel reinforcement in concrete by means of the polarization resistance method, Materials and Structures, pp.623-666, 2004.

Y. Zhao, J. Yu, J. Hu, and W. , Crack shape and rust distribution in corrosion-induced cracking concrete, Corrosion Science, vol.55, pp.385-393, 2012.
DOI : 10.1016/j.corsci.2011.11.002

R. M. Cornell and U. Schwertmann, The iron oxides structure, properties, reactions, occurrence and uses, 1996.

C. Fang, K. Lundgren, . Plos, and K. Gylltoft, Bond behaviour of corroded reinforcing steel bars in concrete. Cement and concete Research, pp.1931-1938, 2006.

A. Almusallam, Effect of degree of corrosion on the properties of reinforcing steel bars, Construction and Building Materials, vol.15, issue.8, pp.361-368, 2001.
DOI : 10.1016/S0950-0618(01)00009-5

R. Tepfers, Cracking of concrete cover along anchored deformed reinforcing bars. Magazine of Concrete Research, pp.3-12, 1979.

D. Borst and H. Muhlhaus, Gradient-dependent plasticity: Formulation and algorithmic aspects, International Journal for Numerical Methods in Engineering, vol.137, issue.3, pp.521-539, 1992.
DOI : 10.1016/0921-5093(91)90326-I

. Pijaudier-cabot and Z. Bazant, Nonlocal Damage Theory, Journal of Engineering Mechanics, vol.113, issue.10, pp.1512-1533, 1987.
DOI : 10.1061/(ASCE)0733-9399(1987)113:10(1512)

J. Mazars, A description of micro- and macroscale damage of concrete structures, Engineering Fracture Mechanics, vol.25, issue.5-6, pp.729-737, 1986.
DOI : 10.1016/0013-7944(86)90036-6

P. A. Cundall and O. Strack, A discrete numerical model for granular assemblies, G??otechnique, vol.29, issue.1, pp.47-65, 1979.
DOI : 10.1680/geot.1979.29.1.47

M. Vassaux, B. Richard, . Ragueneau, and A. Millard, Lattice models applied to cyclic behavior description of quasi-brittle materials: advantages of implicit integration, International Journal for Numerical and Analytical Methods in Geomechanics, vol.98, issue.7, pp.39-775, 2015.
DOI : 10.1016/j.engfracmech.2012.11.013
URL : https://hal.archives-ouvertes.fr/hal-01177051

C. Giry, . Dufour, and J. Mazars, Stress-based nonlocal damage model, International Journal of Solids and Structures, vol.48, issue.25-26, pp.48-3431, 2011.
DOI : 10.1016/j.ijsolstr.2011.08.012
URL : https://hal.archives-ouvertes.fr/hal-01545303

A. Hillerborg and P. Modeer, Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements, Cement and Concrete Research, vol.6, issue.6, pp.773-781, 1976.
DOI : 10.1016/0008-8846(76)90007-7

R. Peerlings, D. Borst, R. Brekelmans, W. , D. Vree et al., GRADIENT ENHANCED DAMAGE FOR QUASI-BRITTLE MATERIALS, International Journal for Numerical Methods in Engineering, vol.23, issue.19, pp.3391-3403, 1996.
DOI : 10.1016/0020-7683(87)90083-7

Z. Bazant and B. Oh, Crack band theory for fracture of concrete, Materials and Construction, pp.155-177, 1983.

M. Matallah, . Laborderie, and O. Maurel, A practical method to estimate crack openings in concrete stuctures, International Journal for Numerical and Analytical Methods in Geomechanics, vol.34, pp.1615-1633, 2010.

T. Feenstra-de and . Delft, Computational aspects of biaxial stress in plain and reinforced concrete, Thèse, 1993.

C. Laborderie, . Maurel, and M. Matallah, Couplage endommagement fissuration : applications aux calculs de structures en béton armé. 19 ème congrès Français de Mécanique, p.6, 2009.

A. Michou, Analyse expérimentale et modélisation du comportement de structures précontraintes, Thèse de l'Univeristé Pierre et Marie Curie, p.210, 2015.

G. Matheron, The intrinsic random functions and their applications, Advances in Applied Probability, vol.1973, issue.5, pp.439-468

X. H. Dang, Identification de la varibilité patiale des champs de contraintes dans les agrégats polycristallins et application à l'approche locale de la rupture, 2012.

Y. Yuan and Y. Ji, Modeling corroded section configuration of steel bar in concrete structure, Construction and Building Materials, vol.23, issue.6, pp.2461-2466, 2009.
DOI : 10.1016/j.conbuildmat.2008.09.026

K. Haidar and G. Pijaudier-cabot, Correlation between the internal length, the fracture process zone and size effect in model materials, Materials and Structures, vol.38, pp.201-210, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00351757

L. Yu, . François, and R. Gagné, Influence of steel?concrete interface defects induced by topcasting on development of chloride-induced corrosion in RC beams under sustained loading, Materials and Structures, issue.49, pp.5169-5181, 2016.

J. Ozbolt, . Or?anic, and . Balabanic, G Modeling pull-out resistance of corroded reinforcement in concrete: Coupled three-dimensional finite element model. Cement and Concrete Composites, pp.41-55, 2014.

V. Tableau, Evolution du faciès de fissuration interne ''le plus dégradé'' pour les densités de courant de 50, 100 et 200 µA/cm² pour les tranches situées hors la contre électrode 50 µA/cm² 100 µA/cm² 200 µA, pp.5-8