A. Amiable, S. Chapuliot, S. Constantinescu, A. Fissolo, and A. , A comparison of lifetime prediction methods for a thermal fatigue experiment, International Journal of Fatigue, vol.28, issue.7, pp.692-706, 2006.
DOI : 10.1016/j.ijfatigue.2005.09.002
URL : https://hal.archives-ouvertes.fr/hal-00111459

M. F. Ashby and D. R. Jones, Engineering materials 2 : an introduction to microstructures, processing and design. Butterworth-Heinemann, fourth édition, 2013.

N. P. Bansal and R. H. Doremus, Handbook of glass properties, 2013.

C. Bathias and A. Pineau, Fatigue of materials and structures, 2013.

B. A. Bilby, A. H. Cottrell, E. Smith, and K. H. Swinden, Plastic Yielding from Sharp Notches, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.279, issue.1376, pp.1-9, 1964.
DOI : 10.1098/rspa.1964.0085

J. R. Brown, Foseco ferrous Foundryman's handbook, 2000.

M. Brochu, Y. Verreman, F. Ajersch, and D. Bouchard, High cycle fatigue strength of permanent mold and rheocast aluminum 357 alloy, International Journal of Fatigue, vol.32, issue.8, pp.1233-1242, 2010.
DOI : 10.1016/j.ijfatigue.2010.01.001

M. Brochu, Y. Verreman, F. Ajersch, and D. Bouchard, Propagation of short fatigue cracks in permanent and semi-solid mold 357 aluminum alloy, International Journal of Fatigue, vol.36, issue.1, pp.120-129, 2012.
DOI : 10.1016/j.ijfatigue.2011.08.009

D. Broek, Elementary engineering fracture mechanics, 2012.
DOI : 10.1007/978-94-011-9055-8

J. Buffière, S. Savelli, P. Jouneau, E. Maire, and R. Fougeres, Experimental study of porosity and its relation to fatigue mechanisms of model Al???Si7???Mg0.3 cast Al alloys, Materials Science and Engineering: A, vol.316, issue.1-2, pp.115-126, 2001.
DOI : 10.1016/S0921-5093(01)01225-4

J. Buffiere, E. Ferrie, H. Proudhon, and W. Ludwig, Three-dimensional visualisation of fatigue cracks in metals using high resolution synchrotron X-ray micro-tomography, Materials Science and Technology, vol.22, issue.9, pp.1019-1024, 2006.
DOI : 10.1007/BF03350961
URL : https://hal.archives-ouvertes.fr/hal-00436195

J. Buffiere, E. Maire, J. Adrien, J. Masse, and E. Boller, In Situ Experiments with X ray Tomography: an Attractive Tool for Experimental Mechanics, Experimental Mechanics, vol.17, issue.2, pp.289-305, 2010.
DOI : 10.1016/j.crme.2008.06.006
URL : https://hal.archives-ouvertes.fr/hal-01538062

C. H. Caceres, I. L. Svensson, and J. A. Taylor, Microstructural factors and the mechanical performance of Al-Si-Mg and Al-Si-Cu- Mg casting alloys, Materials Solutions 2002-2nd International Aluminium Casting Technology Symposium, pp.1-10, 2002.

. Cai, B. Cai, J. Wang, A. Kao, K. Pericleous et al., 4D synchrotron X-ray tomographic quantification of the transition from cellular to dendrite growth during directional solidification, Acta Materialia, vol.117, pp.160-169, 2016.
DOI : 10.1016/j.actamat.2016.07.002

O. Caty, E. Maire, S. Youssef, and R. Bouchet, Modeling the properties of closed-cell cellular materials from tomography images using finite shell elements, Acta Materialia, vol.56, issue.19, pp.5524-5534, 2008.
DOI : 10.1016/j.actamat.2008.07.023
URL : https://hal.archives-ouvertes.fr/hal-01538068

L. Ceschini, A. Morri, and G. Sambogna, The effect of hot isostatic pressing on the fatigue behaviour of sand-cast A356-T6 and A204-T6 aluminum alloys, Journal of Materials Processing Technology, vol.204, issue.1-3, pp.231-238, 2008.
DOI : 10.1016/j.jmatprotec.2007.11.067

L. Ceschini, A. Morri, A. Morri, A. Gamberini, and S. Messieri, Correlation between ultimate tensile strength and solidification microstructure for the sand cast A357 aluminium alloy, Materials & Design, vol.30, issue.10, pp.4525-4531, 2009.
DOI : 10.1016/j.matdes.2009.05.012

E. Insa-lyon-charkaluk, A. Bignonnet, A. Constantinescu, D. Van, and K. , Fatigue design of structures under thermomechanical loadings, these.pdf © [S. Dézécot], pp.12-1199, 2002.

J. L. Chaboche, A review of some plasticity and viscoplasticity constitutive theories, International Journal of Plasticity, vol.24, issue.10, pp.1642-1693, 2008.
DOI : 10.1016/j.ijplas.2008.03.009

E. Charkaluk, A. Constantinescu, F. Szmytka, and S. Tabibian, Probability density functions: From porosities to fatigue lifetime, International Journal of Fatigue, vol.63, issue.0, pp.127-136, 2014.
DOI : 10.1016/j.ijfatigue.2014.01.017
URL : https://hal.archives-ouvertes.fr/hal-00961217

C. Chen, A. Richter, and R. C. Thomson, Investigation of mechanical properties of intermetallic phases in multi-component Al???Si alloys using hot-stage nanoindentation, Intermetallics, vol.18, issue.4, pp.499-508, 2010.
DOI : 10.1016/j.intermet.2009.09.013

B. Closset and D. Fay, Strontium modification of aluminum investment casting alloys, AFS Transactions, vol.90, pp.505-509, 1990.

P. Cloetens, M. Pateyron-salomé, J. Y. Buffiere, G. Peix, J. Baruchel et al., Observation of microstructure and damage in materials by phase sensitive radiography and tomography, Journal of Applied Physics, vol.40, issue.9, pp.5878-5886, 1997.
DOI : 10.1016/0956-7151(92)90396-V
URL : https://hal.archives-ouvertes.fr/hal-01668836

P. Cloetens, W. Ludwig, J. Baruchel, D. Van-dyck, J. Van-landuyt et al., Holotomography: Quantitative phase tomography with micrometer resolution using hard synchrotron radiation x rays, Applied Physics Letters, vol.49, issue.19, pp.2912-2914, 1999.
DOI : 10.1107/S0108767394011803

P. Cloetens, Contribution to phase contrast imaging, reconstruction and tomography with hard synchrotron radiation : principles, implementation and applications, Thèse de doctorat Vakgroep Natuurkunde en Fotonica ), 1999.

S. Dezecot and M. Brochu, Microstructural characterization and high cycle fatigue behavior of investment cast A357 aluminum alloy, International Journal of Fatigue, vol.77, issue.77, pp.154-159, 2015.
DOI : 10.1016/j.ijfatigue.2015.03.004
URL : https://hal.archives-ouvertes.fr/hal-01160555

M. D. Dighe, A. M. Gokhale, and M. F. Horstemeyer, Effect of loading condition and stress state on damage evolution of silicon particles in an Al-Si-Mg-Base cast alloy, Metallurgical and Materials Transactions A, vol.26, issue.3, pp.555-565, 2002.
DOI : 10.1007/BF02672285

T. Dillard, F. N-'guyen, E. Maire, L. Salvo, *. S. Forest et al., 3D quantitative image analysis of open-cell nickel foams under tension and compression loading using X-ray microtomography, Philosophical Magazine, vol.11, issue.19, pp.2147-2175, 2005.
DOI : 10.1103/PhysRevE.53.6181
URL : https://hal.archives-ouvertes.fr/hal-00154842

F. Ellyin and Z. Xia, A General Fatigue Theory and Its Application to Out-of-Phase Cyclic Loading, Journal of Engineering Materials and Technology, vol.115, issue.4, pp.411-416, 1993.
DOI : 10.1115/1.2904239

J. Fan, D. L. Mcdowell, M. F. Horstemeyer, and K. Gall, Cyclic plasticity at pores and inclusions in cast Al???Si alloys, Engineering Fracture Mechanics, vol.70, issue.10, pp.1281-1302, 2003.
DOI : 10.1016/S0013-7944(02)00097-8

C. E. Feltner and J. D. Morrow, Microplastic Strain Hysteresis Energy as a Criterion for Fatigue Fracture, Journal of Basic Engineering, vol.83, issue.1, pp.15-22, 1961.
DOI : 10.1115/1.3658884

E. Ferrie, J. Buffiere, and W. Ludwig, 3D characterisation of the nucleation of a short fatigue crack at a pore in a cast Al alloy using high resolution synchrotron microtomography, International Journal of Fatigue, vol.27, issue.10-12, pp.1215-1220, 2005.
DOI : 10.1016/j.ijfatigue.2005.07.015
URL : https://hal.archives-ouvertes.fr/hal-01668819

C. T. La-fonderie, Atlas métallographique des alliages d'aluminium moulés. Sèvre, editions techniques des industries de la fonderie édition, 1989.

K. Gall, N. Yang, M. Horstemeyer, D. L. Mcdowell, and J. Fan, The debonding and fracture of Si particles during the fatigue of a cast Al-Si alloy, Metallurgical and Materials Transactions A, vol.26, issue.12, pp.12-3079, 1999.
DOI : 10.1520/STP18824S

Y. Gao, J. Yi, P. Lee, and T. Lindley, A micro-cell model of the effect of microstructure and defects on fatigue resistance in cast aluminum alloys, Acta Materialia, vol.52, issue.19, pp.5435-5449, 2004.
DOI : 10.1016/j.actamat.2004.07.035

C. Geuzaine, J. Remacle, and . Gmsh, Gmsh: A 3-D finite element mesh generator with built-in pre- and post-processing facilities, International Journal for Numerical Methods in Engineering, vol.69, issue.4, pp.1309-1331, 2009.
DOI : 10.1007/978-3-642-59223-2

G. C. Gleason and J. Tullis, A flow law for dislocation creep of quartz aggregates determined with the molten salt cell, Tectonophysics, vol.247, issue.1-4, pp.1-23, 1995.
DOI : 10.1016/0040-1951(95)00011-B

A. M. Gokhale, M. D. Dighe, and M. Horstemeyer, Effect of temperature on silicon particle damage in A356 alloy, Metallurgical and Materials Transactions A, vol.239, issue.3, pp.905-907, 1998.
DOI : 10.1007/s11661-998-0281-0

A. S. Helle, K. E. Easterling, and M. F. Ashby, Hot-isostatic pressing diagrams: New developments, Acta Metallurgica, vol.33, issue.12, pp.2163-2174, 1985.
DOI : 10.1016/0001-6160(85)90177-4

J. H. Hubbell and S. M. Seltzer, Tables of X-ray mass attenuation coefficients and mass energy-absorption coefficients 1 keV to 20 MeV for elements Z= 1 to 92 and 48 additional substances of dosimetric interest. rapport Ionizing Radiation Div, National Inst. of Standards and Technology-PL, vol.95, 1995.
DOI : 10.6028/NIST.IR.5632

P. Huter, P. Renhart, S. Oberfrank, M. Schwab, F. Grün et al., High-and low-cycle fatigue influence of silicon, copper, strontium and iron on hypoeutectic Al?Si?Cu and Al?Si?Mg cast alloys used in cylinder heads, International Journal of Fatigue, vol.15, 2015.

M. Javidani and D. Larouche, Application of cast Al???Si alloys in internal combustion engine components, International Materials Reviews, vol.121, issue.2, pp.132-158000335489900002, 2014.
DOI : 10.1016/j.surfcoat.2005.05.042

A. C. Kak and M. Slaney, Principles of computerized tomographic imaging, 1988.

J. G. Kaufman and E. L. Rooy, Aluminum alloy castings : properties, processes, and applications, 2004.

A. M. Korsunsky, D. Dini, F. P. Dunne, and M. J. Walsh, Comparative assessment of dissipated energy and other fatigue criteria???, International Journal of Fatigue, vol.29, issue.9-11, pp.1990-1995, 2007.
DOI : 10.1016/j.ijfatigue.2007.01.007

K. Koster, A. Fleury, E. Vasseur, E. Rémy, and L. , Thermal-mechanical fatigue testing. ASTM special technical publication, pp.563-580, 1231.
DOI : 10.1520/stp13971s
URL : https://hal.archives-ouvertes.fr/hal-00783180

W. Kurz and K. Fisher, Fundamentals of solidification, 1989.

D. A. Lados, D. Apelian, and A. M. De-figueredo, Fatigue performance of high integrity cast aluminum components, Proceedings from the 2nd international aluminum casting technology symposium, pp.185-96, 2002.

. Le and V. D. Le, Etude de l'influence des hétérogénéités microstructurales sur la tenue en fatigue à grand nombre de cycles des alliages d'aluminium de fonderie, Thèse de doctorat, 2016.

. Lee, F. T. Lee, J. F. Major, and F. H. Samuel, Effect of silicon particles on the fatigue crack growth characteristics of Al-12 Wt Pct Si-0.35 Wt Pct Mg-(0 to 0.02) Wt Pct Sr casting alloys, Metallurgical and Materials Transactions A, vol.6, issue.1, pp.1553-1570, 1995.
DOI : 10.1007/BF02672305

. Lee, F. T. Lee, J. F. Major, and F. H. Samuel, Fracture Behaviour of Al12wt

M. H. Lee, J. J. Kim, K. H. Kim, N. J. Kim, S. Lee et al., Effects of HIPping on high-cycle fatigue properties of investment cast A356 aluminum alloys, Materials Science and Engineering: A, vol.340, issue.1-2, pp.123-129, 2003.
DOI : 10.1016/S0921-5093(02)00157-0

S. Lee, R. A. Lebensohn, and A. D. Rollett, Modeling the viscoplastic micromechanical response of two-phase materials using Fast Fourier Transforms, International Journal of Plasticity, vol.27, issue.5, pp.707-727, 2011.
DOI : 10.1016/j.ijplas.2010.09.002

. Li, Y. Li, Z. B. Xu, and J. M. Zeng, Effect of Hydrogen Content on Impact Property of A357 Alloy, Materials Science Forum, vol.704, issue.705, pp.1201-1204, 2012.
DOI : 10.4028/www.scientific.net/MSF.704-705.1201

N. Limodin, A. Bartali, L. Wang, J. Lachambre, J. Buffiere et al., Application of X-ray microtomography to study the influence of the casting microstructure upon the tensile behaviour of an Al-Si alloy. Nuclear Instruments & Methods in Physics Research Section B-Beam Interactions with, Materials and Atoms, vol.14, issue.324, pp.57-62000333791600010, 2014.
URL : https://hal.archives-ouvertes.fr/hal-01736294

J. Linder, M. Axelsson, and H. Nilsson, The influence of porosity on the fatigue life for sand and permanent mould cast aluminium, International Journal of Fatigue, vol.28, issue.12, pp.1752-1758, 2006.
DOI : 10.1016/j.ijfatigue.2006.01.001

W. E. Lorensen and H. E. Cline, Marching cubes : A high resolution 3D surface construction algorithm, SIGGRAPH Comput. Graph, vol.87, issue.21 4, pp.163-169, 1987.

. Lum and R. Lumley, Fundamentals of aluminium metallurgy : Production, processing and applications, 2010.

. Mai, E. Maire, and P. J. Withers, Quantitative X-ray tomography, International materials reviews, vol.59, issue.1, pp.1-43, 2014.

P. L. Manning, L. Margetts, M. R. Johnson, P. J. Withers, W. I. Sellers et al., Biomechanics of Dromaeosaurid Dinosaur Claws: Application of X-Ray Microtomography, Nanoindentation, and Finite Element Analysis, The Anatomical Record: Advances in Integrative Anatomy and Evolutionary Biology, vol.53, issue.9, pp.1397-1405, 2009.
DOI : 10.1111/j.1469-7998.1986.tb03620.x

V. Maurel, L. Rémy, F. Dahmen, and N. Haddar, An engineering model for low cycle fatigue life based on a partition of energy and micro-crack growth, International Journal of Fatigue, vol.31, issue.5, pp.952-961, 2009.
DOI : 10.1016/j.ijfatigue.2008.09.004
URL : https://hal.archives-ouvertes.fr/hal-00367997

D. Mcdowell, K. Gall, M. Horstemeyer, and J. Fan, Microstructure-based fatigue modeling of cast A356-T6 alloy, Engineering Fracture Mechanics, vol.70, issue.1, pp.49-80, 2003.
DOI : 10.1016/S0013-7944(02)00021-8

. Mei, G. Meijer, F. Ellyin, and Z. Xia, Aspects of residual thermal stress/strain in particle reinforced metal matrix composites, Composites Part B : Engineering, vol.31, issue.1, pp.29-37, 2000.

E. Merhy, L. Rémy, H. Maitournam, and L. Augustins, Crack growth characterisation of A356-T7 aluminum alloy under thermo-mechanical fatigue loading, Engineering Fracture Mechanics, vol.110, pp.99-112, 2013.
DOI : 10.1016/j.engfracmech.2013.03.019
URL : https://hal.archives-ouvertes.fr/hal-00904426

A. Mirone, E. Brun, E. Gouillart, P. Tafforeau, and J. Kieffer, The PyHST2 hybrid distributed code for high speed tomographic reconstruction with iterative reconstruction and a priori knowledge capabilities. Nuclear Instruments and Methods in Physics Research Section B : Beam Interactions with, Materials and Atoms, vol.14, issue.324, pp.41-48, 2014.

M. A. Moustafa, F. H. Samuel, and H. W. Doty, Effect of solution heat treatment and additives on the microstructure of Al-Si (A413. 1) automotive alloys, Journal of materials science, vol.38, pp.22-4507, 2003.

M. Mueller, M. Fornabaio, G. ?agar, and A. Mortensen, Microscopic strength of silicon particles in an aluminium???silicon alloy, INSA Lyon, tous droits réservés Références bibliographiques [MUE 16, pp.165-175, 2016.
DOI : 10.1016/j.actamat.2015.12.006

Y. Murakami and T. Endo, Effects of small defects on fatigue strength of metals, International Journal of Fatigue, vol.2, issue.1, pp.23-30, 1980.
DOI : 10.1016/0142-1123(80)90024-9

J. L. Murray and A. J. Mcalister, The Al-Si (aluminum-silicon) system. Bulletin of alloy phase diagrams, pp.74-84, 1984.

C. Nayhumwa, N. R. Green, and J. Campbell, Influence of casting technique and hot isostatic pressing on the fatigue of an Al-7Si-Mg alloy, Metallurgical and Materials Transactions A, vol.38, issue.4, pp.349-358, 2001.
DOI : 10.1179/026708392790170225

T. S. Newman and H. Yi, A survey of the marching cubes algorithm, Computers & Graphics, vol.30, issue.5, pp.854-879, 2006.
DOI : 10.1016/j.cag.2006.07.021

G. Nicoletto, R. Kone?ná, and S. Fintova, Characterization of microshrinkage casting defects of Al???Si alloys by X-ray computed tomography and metallography, International Journal of Fatigue, vol.41, issue.41, pp.39-46, 2012.
DOI : 10.1016/j.ijfatigue.2012.01.006

E. Nizery, J. Y. Buffière, H. Proudhon, A. Daniélou, and S. Forest, Influence of Particles on Short Fatigue Crack Initiation in 2050-T8 and 7050-T74, Materials Science Forum, vol.794, issue.796, pp.296-301, 2014.
DOI : 10.4028/www.scientific.net/MSF.794-796.296
URL : https://hal.archives-ouvertes.fr/hal-01305626

J. Ollion, J. Cochennec, F. Loll, C. Escudé, and T. Boudier, TANGO: a generic tool for high-throughput 3D image analysis for studying nuclear organization, Bioinformatics, vol.27, issue.14, pp.2013-256
DOI : 10.1093/bioinformatics/btr053

W. J. Ostergren, A damage function and associated failure equations for predicting hold time and frequency effects in elevated temperature, low cycle fatigue, Journal of Testing and Evaluation, vol.4, issue.5, pp.327-339, 1976.

D. Paganin, S. C. Mayo, T. E. Gureyev, P. R. Miller, and S. W. Wilkins, Simultaneous phase and amplitude extraction from a single defocused image of a homogeneous object, Journal of Microscopy, vol.206, issue.1, pp.33-40, 2002.
DOI : 10.1046/j.1365-2818.2002.01010.x

I. Papadioti, K. Danas, and N. Aravas, A methodology for the estimation of the effective yield function of isotropic composites, International Journal of Solids and Structures, vol.87, pp.120-138, 2016.
DOI : 10.1016/j.ijsolstr.2016.02.022
URL : https://hal.archives-ouvertes.fr/hal-01395635

S. Pattnaik, D. B. Karunakar, and P. K. Jha, Developments in investment casting process???A review, Journal of Materials Processing Technology, vol.212, issue.11, pp.2332-2348, 2012.
DOI : 10.1016/j.jmatprotec.2012.06.003

C. Petit, E. Maire, S. Meille, J. Adrien, S. Kurosu et al., CoCrMo cellular structures made by Electron Beam Melting studied by local tomography and finite element modelling, Materials Characterization, vol.116, pp.48-54, 2016.
DOI : 10.1016/j.matchar.2016.04.006
URL : https://hal.archives-ouvertes.fr/hal-01538192

A. Pineau, A. A. Benzerga, and T. Pardoen, Failure of metals I: Brittle and ductile fracture, Acta Materialia, vol.107, pp.424-483, 2016.
DOI : 10.1016/j.actamat.2015.12.034
URL : https://hal.archives-ouvertes.fr/hal-01308255

G. Ran, J. Zhou, and Q. G. Wang, The effect of hot isostatic pressing on the microstructure and tensile properties of an unmodified A356-T6 cast aluminum alloy, Journal of Alloys and Compounds, vol.421, issue.1-2, pp.80-86, 2006.
DOI : 10.1016/j.jallcom.2005.11.019

E. P. Rocha, R. B. Anchieta, A. C. Freitas-junior, E. O. De-almeida, P. M. Cattaneo et al., Mechanical behavior of ceramic veneer in zirconia-based restorations: A 3- dimensional finite element analysis using microcomputed tomography data, The Journal of Prosthetic Dentistry, vol.105, issue.1, pp.14-20, 2011.
DOI : 10.1016/S0022-3913(10)60184-9

. Sam, A. M. Samuel, J. Gauthier, and F. H. Samuel, Microstructural aspects of the dissolution and melting of Al2Cu phase in Al-Si alloys during solution heat treatment, Metallurgical and Materials Transactions A, vol.27, issue.7, pp.1785-1798, 1996.

C. A. Schneider, W. S. Rasband, and K. W. Eliceiri, NIH Image to ImageJ: 25 years of image analysis, Nature Methods, vol.42, issue.7, pp.671-675, 2012.
DOI : 10.2144/000112257

. Shi, C. F. Shih, and J. W. Hutchinson, Fully Plastic Solutions and Large Scale Yielding Estimates for Plane Stress Crack Problems, Journal of Engineering Materials and Technology, vol.98, issue.4, pp.289-295, 1976.
DOI : 10.1115/1.3443380

R. P. Skelton, High strain fatigue of 20Cr/25Ni/Nb steel at 1025 K part III: Crack propagation, Materials Science and Engineering, vol.19, issue.2, pp.193-200, 1975.
DOI : 10.1016/0025-5416(75)90106-8

R. P. Skelton, Energy criterion for high temperature low cycle fatigue failure, Materials Science and Technology, vol.1, issue.5, pp.427-440, 1991.
DOI : 10.1115/1.3265565

K. Smith, T. H. Topper, and P. Watson, A stress-strain function for the fatigue of metals, Journal of materials, vol.5, pp.767-778, 1970.

R. E. Spear and G. R. Gardner, Dendrite cell size, AFS Transactions, vol.71, pp.209-215, 1963.

S. R. Stock, Microcomputed tomography : methodology and applications, 2008.
DOI : 10.1201/9781420058772

F. Szmytka, M. H. Maitournam, and L. Rémy, An implicit integration procedure for an elasto-viscoplastic model and its application to thermomechanical fatigue design of automotive parts, Computers & Structures, vol.119, pp.155-165, 2013.
DOI : 10.1016/j.compstruc.2013.01.009
URL : https://hal.archives-ouvertes.fr/hal-00815505

I. Lyon, tous droits réservés Références bibliographiques [SZM 13b] Szmytka F., Oudin A. A reliability analysis method in thermomechanical fatigue design, International Journal of Fatigue, vol.53, pp.82-91, 2013.

S. Tabibian, E. Charkaluk, A. Constantinescu, A. Oudin, and F. Szmytka, Behavior, damage and fatigue life assessment of lost foam casting aluminum alloys under thermo-mechanical fatigue conditions, Procedia Engineering, vol.2, issue.1, pp.1145-1154, 2010.
DOI : 10.1016/j.proeng.2010.03.124

S. Tabibian, E. Charkaluk, A. Constantinescu, G. Guillemot, and F. Szmytka, Influence of process-induced microstructure on hardness of two Al???Si alloys, Materials Science and Engineering: A, vol.646, issue.646, pp.190-200, 2015.
DOI : 10.1016/j.msea.2015.08.051
URL : https://hal.archives-ouvertes.fr/hal-01253000

M. Tash, F. H. Samuel, F. Mucciardi, and H. W. Doty, Effect of metallurgical parameters on the hardness and microstructural characterization of as-cast and heat-treated 356 and 319 aluminum alloys, Materials Science and Engineering: A, vol.443, issue.1-2, pp.185-201, 2007.
DOI : 10.1016/j.msea.2006.08.054

S. Terzi, J. A. Taylor, Y. H. Cho, L. Salvo, M. Suéry et al., In situ study of nucleation and growth of the irregular ?-Al?-Al 5 FeSi eutectic by 3D synchrotron X-ray microtomography, Acta Materialia, vol.10, issue.58, pp.16-5370, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00527810

J. Thomas, L. Verger, A. Bignonnet, and E. Charkaluk, Thermomechanical design in the automotive industry, Fatigue <html_ent glyph="@amp;" ascii="&"/> Fracture of Engineering Materials and Structures, vol.7, issue.10, pp.887-895, 2004.
DOI : 10.1179/026708391790183853
URL : https://hal.archives-ouvertes.fr/hal-00012205

A. Tireira, G. Requena, S. Jao, S. Borbely, A. Klocker et al., Rupture of intermetallic networks and strain localization in cast AlSi12Ni alloy: 2D and 3D characterization, Acta Materialia, vol.112, pp.162-170, 2016.
DOI : 10.1016/j.actamat.2016.04.020
URL : https://hal.archives-ouvertes.fr/emse-01505758

G. Tozzi, Q. Zhang, and J. Tong, 3D real-time micromechanical compressive behaviour of bone???cement interface: Experimental and finite element studies, Journal of Biomechanics, vol.45, issue.2, pp.356-363, 2012.
DOI : 10.1016/j.jbiomech.2011.10.011

N. Vanderesse, E. Maire, A. Chabod, and J. Buffiere, Microtomographic study and finite element analysis of the porosity harmfulness in a cast aluminium alloy, International Journal of Fatigue, vol.33, issue.12, pp.12-1514, 2011.
DOI : 10.1016/j.ijfatigue.2011.06.010
URL : https://hal.archives-ouvertes.fr/hal-01538229

R. Insa-lyon-venkataramani, R. Simpson, and C. Ravindran, Effect of melt superheat on maximum nuclei density in A356 alloy, Materials Characterization, vol.35, issue.1, pp.81-92, 1995.
DOI : 10.1016/1044-5803(95)80096-4

G. F. Voort, H. James, D. J. Mills-m, . Destefani-j, and C. D. Diete-rich, ASM Handbook : Metallography and Microstructures, 2004.

Z. Wang, T. Chen, and D. J. Lloyd, Stress distribution in particulate-reinforced metal-matrix composites subjected to external load, Metallurgical Transactions A, vol.38, issue.2, pp.197-207, 1993.
DOI : 10.1179/cmq.1989.28.2.145

Q. G. Wang, D. Apelian, and D. A. Lados, Fatigue behavior of A356-T6 aluminum cast alloys. Part I. Effect of casting defects, Journal of Light Metals, vol.1, issue.1, pp.73-84, 2001.
DOI : 10.1016/S1471-5317(00)00008-0

Q. G. Wang, D. Apelian, and D. A. Lados, Fatigue behavior of A356/357 aluminum cast alloys. Part II ??? Effect of microstructural constituents, Journal of Light Metals, vol.1, issue.1, pp.85-97, 2001.
DOI : 10.1016/S1471-5317(00)00009-2

Q. G. Wang, P. N. Crepeau, C. J. Davidson, and J. R. Griffiths, Oxide films, pores and the fatigue lives of cast aluminum alloys, Metallurgical and Materials Transactions B, vol.15, issue.337, pp.887-895, 2006.
DOI : 10.1179/026708399101506751

L. Wang, N. Limodin, A. Bartali, J. Witz, R. Seghir et al., Influence of pores on crack initiation in monotonic tensile and cyclic loadings in lost foam casting A319 alloy by using 3D in-situ analysis, Materials Science and Engineering: A, vol.673, issue.673, pp.362-372, 2016.
DOI : 10.1016/j.msea.2016.07.036
URL : https://hal.archives-ouvertes.fr/hal-01433827

R. H. Webb and C. K. Dorey, The Pixilated Image, Handbook of Biological Confocal Microscopy, pp.55-67, 1995.
DOI : 10.1007/978-1-4757-5348-6_4

. Wei, L. W. Weihmuller, and J. Mashl, The Effect of Hot Isostatic Pressing on the Mechanical Properties of Aerospace Aluminum Castings, ANNUAL FORUM PROCEEDINGS-AMERICAN HELICOPTER SOCIETY INC, vol.61, p.2120, 2005.

P. J. Withers and M. Preuss, Fatigue and Damage in Structural Materials Studied by X-Ray Tomography, Annual Review of Materials Research, vol.42, issue.1, pp.81-103, 2012.
DOI : 10.1146/annurev-matsci-070511-155111

Z. Xia, D. Kujawski, and F. Ellyin, Effect of mean stress and ratcheting strain on fatigue life of steel, International Journal of Fatigue, vol.18, issue.5, pp.335-341, 1996.
DOI : 10.1016/0142-1123(96)00088-6

J. Z. Yi, Y. X. Gao, P. D. Lee, and T. C. Lindley, Effect of Fe-content on fatigue crack initiation and propagation in a cast aluminum???silicon alloy (A356???T6), Materials Science and Engineering A, vol.386, issue.1-2, pp.396-407, 2004.
DOI : 10.1016/S0921-5093(04)00964-5

S. Youssef, E. Maire, and R. Gaertner, Finite element modelling of the actual structure of cellular materials determined by X-ray tomography, Acta Materialia, vol.53, issue.3, pp.719-730, 2005.
DOI : 10.1016/j.actamat.2004.10.024
URL : https://hal.archives-ouvertes.fr/hal-00436799

Y. X. Zhao, Q. Gao, and J. N. Wang, Interaction and evolution of short fatigue cracks, Fatigue and Fracture of Engineering Materials and Structures(UK), pp.459-467, 1999.
DOI : 10.1046/j.1460-2695.1999.00196.x

C. Zhongwei and Z. Ruijie, Effect of strontium on primary dendrite and eutectic temperature of A357 aluminum alloy, 2010.

M. Zilske, H. Lamecker, and S. Zachow, Adaptive remeshing of non-manifold surfaces. Konrad-Zuse-Zentrum für Informationstechnik, 2007.

. Prénoms, Sébastien TITRE : Caractérisation et modélisation du rôle des défauts microstructuraux dans la fatigue oligocyclique des alliages d'aluminium de fonderie: application au procédé à modèle perdu NATURE : Doctorat Numéro d'ordre, pp.2016-148