H. Laeuffer, J. Arbaoui, C. Bois, F. Lavelle, N. Perry et al., A new device to measure permeability evolution under pressure loading: Application to CFRP pipes, Measurement, vol.98, issue.4, pp.68-76, 2017.
DOI : 10.1016/j.measurement.2016.11.023

D. Caous, C. Bois, J. Wahl, T. Palin-luc, and J. Valette, A method to determine composite material residual tensile strength in the fibre direction as a function of the matrix damage state after fatigue loading, Composites Part B: Engineering, vol.127, pp.15-25, 2017.
DOI : 10.1016/j.compositesb.2017.06.021

P. Van-der-sypt, M. Chérif, and C. Bois, Analysis of the fatigue behaviour of laminated composite holes subjected to pin-bearing loads, International Journal of Fatigue, vol.103, pp.86-98, 2017.
DOI : 10.1016/j.ijfatigue.2017.05.025

C. Bois and C. Hochard, Surveillance des fissures dans les composites stratifi??s. Capteurs int??gr??s ?? la structure, Revue des composites et des mat??riaux avanc??s, vol.17, issue.2, pp.147-56, 2007.
DOI : 10.3166/rcma.17.147-156

M. Chérif, C. Bois, and Y. Landon, Rôle des défauts de perçage sur le comportement en matage des composites stratifiés sous sollicitation de fatigue. Revue des composites et des matériaux avancés, pp.423-457, 2014.

C. Bois and C. Hochard, Measurement and Modelling for the Monitoring of Damaged Laminate Composite Structure, 1st European Workshop on Structural Health Monitoring, 2002.

C. Bois and C. Hochard, Damage monitoring in CFRP laminated composites using dynamic measurements, 4th International Workshop on Structural Health Monitoring, 2003.

C. Bois and C. Hochard, Multi-damages monitoring In CFRP laminated composites, ICCM14 -14th Intenational Conference on Composite Materials, 2003.

C. Bois and C. Hochard, Damages measurements and predictive model of damages for a complete monitoring system, 2nd European Workshop on Structural Health Monitoring, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00096960

C. Bois, C. Hochard, D. Vadder, D. Mazerolle, and F. , Fatigue crack monitoring in glass fiber reinforced polymer laminate with piezoelectric transducers, 5th International Workshop on Structural Health Monitoring, 2006.

C. Bois and C. Hochard, In-situ assessment of the size and the location of a fatigue crack in a GFRP laminate, 3rd European Workshop on Structural Health Monitoring, pp.1199-206, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00106925

C. Bois and C. Hochard, Integrated monitoring system for damage characterisation in composite structures, ECCM12 -12TH European Conference on Composite Materials, 2006.

C. Magnière, L. Lemoine, C. Bois, J. Wahl, C. Goetz et al., Perseus / pegase an outstanding experiment to mix space passion, European Conference for AeroSpace Sciences, 2009.

J. Malenfant, C. Bois, M. Danis, A. Kusiak, D. Lasseux et al., Thermo mechanical damage influence on the composite material permeability: Application to the design of a linerless cryogenic tank, 11th European Conference Spacecraft Structures, Materials and Mechanical Testing, 2009.

C. Bois, L. Goff, E. Quénisset, J. Wahl, J. Wargnier et al., Expanded and bonded bushings for metal composite assembly reinforcement, ECCM14 - 14TH European Conference on Composite Materials, p.2010

A. Pilato, C. Bois, J. Wahl, and N. Perry, Development of a pressurized ring test on thick high performance composite material, ECCM14 -14TH European Conference on Composite Materials, p.2010

C. Bois, H. Wargnier, J. Wahl, L. Goff, and E. , Design of hybrid (bonded/fastener) composite joints: from load transfer toward strength prediction, ECCM15 - 15TH European Conference on Composite Materials, p.2012

L. Goff, E. Bois, C. Wargnier, H. Wahl, and J. , Impact of material degradations on load transfer and assembly behavior. Application to reinforced holes in composite assembly, ECCM15 -15TH European Conference on Composite Materials, p.2012

J. Arbaoui, J. Malenfant, J. Wahl, and C. Bois, Etude expérimentale et modélisation de l'endommagement pour la prévision de la perméabilité des matériaux composites destinés aux applications spatiales. Symposium international sur les matériaux et les technologies de l'aéronautique, p.2012

J. Lecomte, C. Bois, H. Wargnier, and J. Wahl, Effect of geometric errors on the behaviour of multi-bolt composite joints, 19th International Conference on Composite Materials, p.2013

J. Lecomte, C. Bois, H. Wargnier, and J. Wahl, Influence of bearing degradation on the behaviour of multi-bolt composite joints with hole-location error, ECCM16 -16TH European Conference on Composite Materials, 2014.

M. Elmoussaid, J. Wahl, N. Perry, and C. Bois, Development of a micromechanical model in interaction with parameters related to the microstructure of carbon/epoxy composites, ECCM16 -16TH European Conference on Composite Materials, 2014.

J. Wahl, C. Bois, H. Laeuffer, and A. Gillet, Mechanical behavior and gas permeability of composites vessels, 4st International Carbon Composites Conference, p.2014

R. Askri, C. Bois, H. Wargnier, and J. Lecomte, Reduced bolted joint model using multi-connected rigid surfaces and continuum shell elements, The 20th international conference on composite materials, p.2015

D. Caous, J. C. Wahl, C. Bois, T. Palin-luc, and J. Valette, Apports des modèles d'endommagement à l'échelle du pli pour l'optimisation du dimensionnement des pales d'éoliennes en fatigue, 19ème Journées Nationales sur les matériaux Composites, 2017.

D. [. Bois, D. Caous, J. C. Wahl, and T. Palin-luc, Construction et identification d'un méso-modèle pour la prédiction de la durée de vie et la résistance résiduelle des composites stratifiés, 36éme Journée de Printemps SF2M, Fatigue des élastomères, polymères et composites, 2017.

M. Chérif, P. Van-der-sypt, and C. Bois, Endommagement d'un stratifié carbone époxy sous sollicitation cyclique de matage, 19ème Journées Nationales sur les matériaux Composites, 2017.

H. Laeuffer, J. Wahl, N. Perry, and C. Bois, Caractérisation et prédiction du réseau de fissures dans les composites stratifiés -Application aux réservoirs de lanceurs spatiaux sans liner, 19ème Journées Nationales sur les matériaux Composites, 2017.

J. Wahl and C. Bois, Effect of intralaminar damage on composite laminate delamination onset, 1st International Carbon Composites Conference, 2007.

C. Bois, G. Boullier, J. Samenayre, F. Bruel, J. Wahl et al., Expanded and bonded assembly for metal bushings in cfrp composites, 2nd International Carbon Composites Conference, 2009.

J. Wahl, . Malenfant, . Jean-charles, C. Bois, M. Danis et al., Influence of thermomechanical loading on composite Material permeability: application to the design of a Linerless cryogenic tank, 3st International Carbon Composites Conference, p.2011

M. Chérif, C. Bois, and Y. Landon, R??le des d??fauts de per??age sur le comportement en matage des composites stratifi??s sous sollicitation de fatigue, Revue des composites et des mat??riaux avanc??s, vol.24, issue.4, p.2013
DOI : 10.3166/rcma.24.423-434

J. Wahl, C. Bois, H. Laeuffer, and A. Gillet, Mechanical behavior and gas permeability of composites vessels, 4st International Carbon Composites Conference, 2014.

M. Chérif, C. Bois, and Y. Landon, Influence du procédé de perçage sur la qualité des alésages et impact sur la tenue des composites stratifiés en matage sous sollicitation de fatigue, p.2015

C. Bois, R. Askri, H. Wargnier, and J. Lecomte, Joining Composite Structures: Towards a Design which Takes into Account the Geometrical Defects and Variabilities, In: 5st International Carbon Composites Conference, 2016.

F. Alkatan, P. Stephan, A. Daidie, and J. Guillot, Equivalent axial stiffness of various components in bolted joints subjected to axial loading, Finite Elements in Analysis and Design, vol.43, issue.8, pp.589-598, 2007.
DOI : 10.1016/j.finel.2006.12.013

O. Allix, P. Feissel, and P. Thévenet, A delay damage mesomodel of laminates under dynamic loading: basic aspects and identification issues, Computers & Structures, vol.81, issue.12, pp.1177-1191, 2003.
DOI : 10.1016/S0045-7949(03)00035-X

URL : https://hal.archives-ouvertes.fr/hal-01745211

O. Allix, N. Feld, E. Baranger, J. Guimard, and C. Ha-minh, The compressive behaviour of composites including fiber kinking: modelling across the scales, Meccanica, vol.22, issue.11, pp.2571-2586, 2014.
DOI : 10.1177/1056789512468355

URL : https://hal.archives-ouvertes.fr/hal-01081417

J. Andriamampianina, F. Alkatan, P. Stéphan, and J. Guillot, Determining load distribution between the different rows of fasteners of a hybrid load transfer bolted joint assembly, Aerospace Science and Technology, vol.23, issue.1, pp.312-320, 2012.
DOI : 10.1016/j.ast.2011.08.008

R. Askri, Approche fiabiliste pour le tolérancement des assemblages par fixation de structures composite-métal, Thèse de doctorat, 2016.

R. Askri, C. Bois, H. Wargnier, and J. Lecomte, Reduced bolted joint model using multi-connected rigid surfaces and continuum shell elements, The 20th International Conference on Composite Materials, 2015.

R. Askri, C. Bois, H. Wargnier, and J. Lecomte, A reduced fastener model using Multi-Connected Rigid Surfaces for the prediction of both local stress field and load distribution between fasteners, Finite Elements in Analysis and Design, vol.110, pp.32-42, 2016.
DOI : 10.1016/j.finel.2015.11.004

A. Ballu, Recherche des modes technologiques de défauts géométriques sur un lot de pièces : essais sur un ensemble de surfaces simulées, 14ème Colloque Produits, Procédés, Systèmes, Intelligents et Durables AIP Primeca, 2015.

Z. P. Ba?ant, Size effect on structural strength: a review, Archive of Applied Mechanics (Ingenieur Archiv), vol.69, issue.9-10, pp.703-725, 1999.
DOI : 10.1007/s004190050252

Z. P. Ba?ant and B. H. Oh, Crack band theory for fracture of concrete, Mat??riaux et Constructions, vol.41, issue.No. 1, pp.155-177, 1983.
DOI : 10.1115/1.3423233

Z. P. Bazant and G. Pijaudier-cabot, Nonlocal Continuum Damage, Localization Instability and Convergence, Journal of Applied Mechanics, vol.55, issue.2, pp.287-293, 1988.
DOI : 10.1115/1.3173674

M. L. Benzeggagh and M. Kenane, Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus, Composites Science and Technology, vol.56, issue.4, pp.439-449, 1996.
DOI : 10.1016/0266-3538(96)00005-X

K. Bodjona, K. Raju, G. Lim, and L. Lessard, Load sharing in single-lap bonded/bolted composite joints. Part I: Model development and validation, Composite Structures, vol.129, pp.268-275, 2015.
DOI : 10.1016/j.compstruct.2015.04.040

C. Bois, O. Montagnier, and C. Hochard, Caracterisation du comportement en compression de materiaux composites par essais de flexion pure, 15ème Journées Nationales Sur Les Matériaux Composites, 2007.
URL : https://hal.archives-ouvertes.fr/hal-01315486

C. Bois, A. Pilato, J. Wahl, P. , and N. , Proposal for a smart pressurised ring test to study thick composite produced by filament winding, Composites Part B: Engineering, vol.53, pp.382-390, 2013.
DOI : 10.1016/j.compositesb.2013.06.001

URL : https://hal.archives-ouvertes.fr/hal-00941424

C. Bois, H. Wargnier, J. Wahl, L. Goff, and E. , An analytical model for the strength prediction of hybrid (bolted/bonded) composite joints, Composite Structures, vol.97, pp.252-260, 2013.
DOI : 10.1016/j.compstruct.2012.10.022

C. Bois, J. Malenfant, J. Wahl, and M. Danis, A multiscale damage and crack opening model for the prediction of flow path in laminated composite, Composites Science and Technology, vol.97, pp.81-89, 2014.
DOI : 10.1016/j.compscitech.2014.04.002

C. Bouvet, T. Lisle, N. Hongkarnjanakul, M. Pastor, S. Rivallant et al., Evaluation of fracture toughness of fiber failure in compression with infrared thermography, 18ème Journées Nationales Sur Les Matériaux Composites, 2015.

G. Bresson, Collage fiable pour l'espace : influence de la qualité des procédés et dimensionnement des assemblages, Thèse de doctorat, 2011.

P. Breteau, Simulation d'assemblage flexible par la mesure -Application au domaine de l'aéronautique, 2009.

B. Budiansky and N. A. Fleck, Compressive failure of fibre composites, Journal of the Mechanics and Physics of Solids, vol.41, issue.1, pp.183-211, 1993.
DOI : 10.1016/0022-5096(93)90068-Q

V. Caccese, R. Mewer, and S. S. Vel, Detection of bolt load loss in hybrid composite/metal bolted connections, Engineering Structures, vol.26, issue.7, pp.895-906, 2004.
DOI : 10.1016/j.engstruct.2004.02.008

P. P. Camanho and C. G. Dávila, Mixed-Mode Decohesion Finite Elements for the Simulation of Delamination, 2002.

P. P. Camanho and M. Lambert, A design methodology for mechanically fastened joints in laminated composite materials, Composites Science and Technology, vol.66, issue.15, pp.3004-3020, 2006.
DOI : 10.1016/j.compscitech.2006.02.017

D. Caous, Rôle de l'endommagement sur la durée de vie en fatigue des matériaux composites stratifiés, 2017.

D. Caous, C. Bois, J. Wahl, T. Palin-luc, and J. Valette, A method to determine composite material residual tensile strength in the fibre direction as a function of the matrix damage state after fatigue loading, Composites Part B: Engineering, vol.127, pp.15-25, 2017.
DOI : 10.1016/j.compositesb.2017.06.021

X. Cheng, S. Wang, J. Zhang, W. Huang, Y. Cheng et al., Effect of damage on failure mode of multi-bolt composite joints using failure envelope method, Composite Structures, vol.160, pp.8-15, 2017.
DOI : 10.1016/j.compstruct.2016.10.042

R. M. Christensen, Mechanics of Composite Materials, Journal of Applied Mechanics, vol.47, issue.2, 1979.
DOI : 10.1115/1.3153710

D. Borst, R. Sluys, L. J. Muhlhaus, H. And-pamin, and J. , FUNDAMENTAL ISSUES IN FINITE ELEMENT ANALYSES OF LOCALIZATION OF DEFORMATION, Engineering Computations, vol.36, issue.2, pp.99-121, 1993.
DOI : 10.1016/0022-5096(84)90014-0

R. Desmorat, F. Gatuingt, and F. Ragueneau, Nonlocal anisotropic damage model and related computational aspects for quasi-brittle materials, Engineering Fracture Mechanics, vol.74, issue.10, pp.1539-1560, 2007.
DOI : 10.1016/j.engfracmech.2006.09.012

URL : https://hal.archives-ouvertes.fr/hal-00994382

J. Deü, Rupture des composites stratifiés sous chargement dynamique : apport des méso-modèles avec endommagement retardé, 1995.

S. Dols, M. Paredes, and P. Morgue, Évaluation de la qualité des assemblages via le monitoring du serrage, Les Assemblages Mécaniques : Evolutions Récentes et Perspectives, 2015.

J. Ekh, J. Schön, and D. Zenkert, Simple and efficient prediction of bearing failure in single shear, composite lap joints, Composite Structures, vol.105, pp.35-44, 2013.
DOI : 10.1016/j.compstruct.2013.04.038

E. Moussaid and M. , Analyse et intégration des spécificités liées au procédé de fabrication dans les modèles de calcul des structures composites application à la simulation du comportement mécanique des fonds des réservoirs bobinés, Thèse de doctorat, 2016.

E. D. Eneyew and M. Ramulu, Experimental study of surface quality and damage when drilling unidirectional CFRP composites, Journal of Materials Research and Technology, vol.3, issue.4, pp.354-362, 2014.
DOI : 10.1016/j.jmrt.2014.10.003

N. Feld, Vers un pont micro-méso de la rupture en compression des composites stratifiés, 2011.

N. Feld, O. Allix, E. Baranger, and J. Guimard, Micro-mechanical prediction of UD laminates behavior under combined compression up to failure: influence of matrix degradation, Journal of Composite Materials, vol.6, issue.22, pp.2317-2333, 2011.
DOI : 10.1016/j.compscitech.2004.12.023

URL : https://hal.archives-ouvertes.fr/hal-00640691

N. Feld, O. Allix, E. Baranger, and J. Guimard, A micromechanics-based mesomodel for unidirectional laminates in compression up to failure, Journal of Composite Materials, vol.6, issue.23, pp.2893-2909, 2012.
DOI : 10.1002/cnm.649

URL : https://hal.archives-ouvertes.fr/hal-00751319

B. Forouraghi, Worst-Case Tolerance Design and Quality Assurance via Genetic Algorithms, Journal of Optimization Theory and Applications, vol.12, issue.2, pp.251-268, 2002.
DOI : 10.1023/A:1008356321921

N. Gayton, Méthodes probabilistes pour la conception mécanique: Application à la fatigue des structures et à l'analyse des tolérances, 2012.

N. Germain, J. Besson, and F. Feyel, Composite layered materials: Anisotropic nonlocal damage models, Computer Methods in Applied Mechanics and Engineering, vol.196, issue.41-44, pp.4272-4282, 2007.
DOI : 10.1016/j.cma.2007.04.009

URL : https://hal.archives-ouvertes.fr/hal-00170638

J. Godin, F. Scheuch, and R. Baker, Mesure par ultrason et Vis instrumentées de la Tension de Serrage des Assemblages Vissés, Les Assemblages Mécaniques : Evolutions Récentes et Perspectives, 2015.

G. Gohorianu, Interaction entre les défauts d'usinage et la tenue en matage d'assemblages boulonnés en carbone/époxy, Thèse de doctorat, 2008.

H. M. Gomes, A. M. Awruch, and P. A. Lopes, Reliability based optimization of laminated composite structures using genetic algorithms and Artificial Neural Networks, Structural Safety, vol.33, issue.3, pp.186-195, 2011.
DOI : 10.1016/j.strusafe.2011.03.001

P. J. Gray and C. T. Mccarthy, A global bolted joint model for finite element analysis of load distributions in multi-bolt composite joints, Composites Part B: Engineering, vol.41, issue.4, pp.317-325, 2010.
DOI : 10.1016/j.compositesb.2010.03.001

P. J. Gray and C. T. Mccarthy, A highly efficient user-defined finite element for load distribution analysis of large-scale bolted composite structures, Composites Science and Technology, vol.71, pp.1517-1527, 2011.
DOI : 10.1016/j.compscitech.2011.06.011

URL : https://hal.archives-ouvertes.fr/hal-00786585

P. Gudmundson and J. And-alpman, Initiation and growth criteria for transverse matrix cracks in composite laminates, Composites Science and Technology, vol.60, issue.2, pp.185-195, 2000.
DOI : 10.1016/S0266-3538(99)00114-1

L. J. Hart-smith, Bolted joint analysis for composite structures, Joining and Repair of Composites Structures, 2004.

R. B. Helsehurst, Design and analysis of structural joints with composite materials, 2013.

C. T. Hoang-ngoc and E. And-paroissien, Simulation of single-lap bonded and hybrid (bolted/bonded) joints with flexible adhesive, International Journal of Adhesion and Adhesives, vol.30, issue.3, pp.117-129, 2010.
DOI : 10.1016/j.ijadhadh.2009.12.002

URL : https://hal.archives-ouvertes.fr/hal-01514900

C. Hochard, N. Lahellec, and C. Bordreuil, A ply scale non-local fibre rupture criterion for CFRP woven ply laminated structures, Composite Structures, vol.80, issue.3, pp.321-326, 2007.
DOI : 10.1016/j.compstruct.2006.05.021

URL : https://hal.archives-ouvertes.fr/hal-00106920

C. Huchette, Sur la complémentarité des approches expérimentales et numériques pour la modélisation des mécanismes d'endommagement des composites stratifiés, Thèse de doctorat, 2005.

C. Huchette, D. Lévêque, C. , and N. , A multiscale damage model for composite laminate based on numerical and experimental complementary tests (Dolny), 2006.

H. Huth, Influence of Fastener Flexibility on the Prediction of Load Transfer and Fatigue Life for Multiple-Row Joints, ASTM), pp.221-250, 1986.
DOI : 10.1520/STP29062S

F. Irisarri, F. Laurin, N. Carrere, M. , and J. , Progressive damage and failure of mechanically fastened joints in CFRP laminates ??? Part II: Failure prediction of an industrial junction, Composite Structures, vol.94, issue.8, pp.2278-2284, 2012.
DOI : 10.1016/j.compstruct.2011.07.005

F. Irisarri, F. Laurin, N. Carrere, M. , and J. , Progressive damage and failure of mechanically fastened joints in CFRP laminates ??? Part I: Refined Finite Element modelling of single-fastener joints, Composite Structures, vol.94, issue.8, pp.2269-2277, 2012.
DOI : 10.1016/j.compstruct.2011.07.023

H. A. Israr, S. Rivallant, and J. J. Barrau, Experimental investigation on mean crushing stress characterization of carbon???epoxy plies under compressive crushing mode, Composite Structures, vol.96, pp.357-364, 2013.
DOI : 10.1016/j.compstruct.2012.09.022

URL : https://hal.archives-ouvertes.fr/hal-00784973

J. Jallageas, Optimisation du perçage de multi-matériaux sur unité de perçage automatique, Thèse de doctorat, 2013.

P. M. Jelf and N. A. Fleck, The failure of composite tubes due to combined compression and torsion, Journal of Materials Science, vol.30, issue.1?4, pp.3080-3084, 1994.
DOI : 10.1007/BF01117623

Z. Kapid?i?, L. Nilsson, A. , and H. , Finite element modeling of mechanically fastened composite-aluminum joints in aircraft structures, Composite Structures, vol.109, pp.198-210, 2014.
DOI : 10.1016/j.compstruct.2013.10.056

G. Kelly, Load transfer in hybrid (bonded/bolted) composite single-lap joints, Composite Structures, vol.69, issue.1, pp.35-43, 2005.
DOI : 10.1016/j.compstruct.2004.04.016

G. Kelly, Load transfer in hybrid (bonded/bolted) composite single-lap joints, Composite Structures, vol.69, issue.1, pp.35-43, 2005.
DOI : 10.1016/j.compstruct.2004.04.016

E. Kilickap, Optimization of cutting parameters on delamination based on Taguchi method during drilling of GFRP composite, Expert Systems with Applications, vol.37, issue.8, pp.6116-6122, 2010.
DOI : 10.1016/j.eswa.2010.02.023

N. Knight, D. Phillips, and I. Raju, Stress Analysis of Bolted, Segmented Cylindrical Shells Exhibiting Flange Mating-Surface Waviness, 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 2009.
DOI : 10.2514/6.2008-1842

N. Knight, K. Song, K. Elliott, I. Raju, W. et al., Elastic-Plastic Nonlinear Response of a Space Shuttle External Tank Stringer: Stringer-Feet Imperfections and Assembly, 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference<BR>20th AIAA/ASME/AHS Adaptive Structures Conference<BR>14th AIAA, 2012.
DOI : 10.1016/j.apm.2006.03.020

K. M. Kostreva, Torque Limit for Bolted Joint For Composites, Part B; Experimentation (NASA Report), 2003.

D. K. Krajcinovic, Continuum Damage Mechanics: When and How?, International Journal of Damage Mechanics, vol.2, issue.3, pp.1-6, 1984.
DOI : 10.1016/0167-6636(88)90022-1

H. Kumazawa and J. Whitcomb, Numerical Modeling of Gas Leakage Through Damaged Composite Laminates, Journal of Composite Materials, vol.42, issue.16, pp.1619-1638, 2008.
DOI : 10.1016/S1359-8368(03)00099-4

J. Kweon, J. Jung, T. Kim, J. Choi, K. et al., Failure of carbon composite-to-aluminum joints with combined mechanical fastening and adhesive bonding, Composite Structures, vol.75, issue.1-4, pp.192-198, 2006.
DOI : 10.1016/j.compstruct.2006.04.013

F. Lachaud, Contribution à l'analyse multi échelle du comportement mécanique non linéaire matériau des structures composites. Habilitation à Diriger des Recherches, 2011.

F. Lachaud, R. Piquet, F. Collombet, and L. Surcin, Drilling of composite structures, Composite Structures, vol.52, issue.3-4, pp.511-516, 2001.
DOI : 10.1016/S0263-8223(01)00040-X

P. Ladevèze, A damage computational method for composite structures, Computers & Structures, vol.44, issue.1-2, pp.79-87, 1992.
DOI : 10.1016/0045-7949(92)90226-P

P. Ladeveze and E. Ledantec, Damage modelling of the elementary ply for laminated composites, Composites Science and Technology, vol.43, issue.3, pp.257-267, 1992.
DOI : 10.1016/0266-3538(92)90097-M

P. Ladeveze and E. Ledantec, Damage modelling of the elementary ply for laminated composites, Composites Science and Technology, vol.43, issue.3, pp.257-267, 1992.
DOI : 10.1016/0266-3538(92)90097-M

P. Ladevèze and G. Lubineau, Pont entre les ?? micro ?? et ?? m??so ?? m??caniques des composites stratifi??s, Comptes Rendus M??canique, vol.331, issue.8, pp.537-544, 2003.
DOI : 10.1016/S1631-0721(03)00130-X

H. Laeuffer, C. Bois, J. Wahl, N. Perry, L. et al., Damage and permeability of composite laminates, The 20th International Conference on Composite Materials, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01360444

H. Laeuffer, J. Arbaoui, C. Bois, F. Lavelle, N. Perry et al., A new device to measure permeability evolution under pressure loading: Application to CFRP pipes, Measurement, vol.98, pp.68-76, 2017.
DOI : 10.1016/j.measurement.2016.11.023

L. Lagunegrand, T. Lorriot, R. Harry, and H. Wargnier, Design of an improved four point bending test on a sandwich beam for free edge delamination studies, Composites Part B: Engineering, vol.37, issue.2-3, pp.127-136, 2006.
DOI : 10.1016/j.compositesb.2005.07.002

F. Laurin, Approche multiechelle des mécanismes de ruine progressive des matériaux stratifies et analyse de la tenue de structures composites, Thèse de doctorat, 2005.

F. Laurin, N. Carrere, C. Huchette, M. , and J. , A multiscale hybrid approach for damage and final failure predictions of composite structures, Journal of Composite Materials, vol.217, issue.20-21, pp.2713-2747, 2013.
DOI : 10.1243/09544100JAERO858

F. Laurin, N. Carrere, J. Maire, and S. Mahdi, Enhanced strength analysis method for composite open-hole plates ensuring design office requirements, Composites Part B: Engineering, vol.62, pp.5-11, 2014.
DOI : 10.1016/j.compositesb.2014.02.002

URL : https://hal.archives-ouvertes.fr/hal-00978733

J. Lecomte, Etude du comportement d'assemblages hybrides métal-composite, 2016.

J. Lecomte, C. Bois, H. Wargnier, and J. Wahl, An analytical model for the prediction of load distribution in multi-bolt composite joints including hole-location errors, Composite Structures, vol.117, pp.354-361, 2014.
DOI : 10.1016/j.compstruct.2014.06.040

J. Lecomte, C. Dupleix-couderc, C. Marcuzzo, C. Bois, and A. Daidie, A robust numerical model for the pre-design of composite Reinforcement by expanded bonded bushing, 3rd International Conference on Mechanics of Composite, 2017.

L. Goff and E. , Etude des transferts de charges dans les alésages composites, application aux renforcements par bague frettée collée, 2013.

L. Goff, E. Bois, C. Wargnier, and H. , A progressive intra-and inter-laminar damage model to predict the effect of out-of-plane confinement on pin-bearing behaviour of laminated composites, J. Compos. Mater, p.51, 2017.

D. Leguillon, Strength or toughness? A criterion for crack onset at a notch, European Journal of Mechanics - A/Solids, vol.21, issue.1, 2002.
DOI : 10.1016/S0997-7538(01)01184-6

L. Riche, R. Haftka, and R. T. , Improved genetic algorithm for minimum thickness composite laminate design, Composites Engineering, vol.5, issue.2, pp.143-161, 1995.
DOI : 10.1016/0961-9526(95)90710-S

D. Liu, Y. Tang, C. , and W. L. , A review of mechanical drilling for composite laminates, Composite Structures, vol.94, issue.4, pp.1265-1279, 2012.
DOI : 10.1016/j.compstruct.2011.11.024

J. Malenfant, P. Serin, D. Lasseux, and C. Bois, Etanchéification d'un réservoir composite sans liner par l'utilisation d'un gaz neutre, 2014.

A. Matzenmiller, J. Lubliner, T. , and R. L. , A constitutive model for anisotropic damage in fiber-composites, Mechanics of Materials, vol.20, issue.2, pp.125-152, 1995.
DOI : 10.1016/0167-6636(94)00053-0

C. T. Mccarthy and P. J. Gray, An analytical model for the prediction of load distribution in highly torqued multi-bolt composite joints, Composite Structures, vol.93, issue.2, pp.287-298, 2011.
DOI : 10.1016/j.compstruct.2010.09.017

M. A. Mccarthy, C. T. Mccarthy, V. P. Lawlor, and W. F. Stanley, Three-dimensional finite element analysis of single-bolt, single-lap composite bolted joints: part I???model development and validation, Composite Structures, vol.71, issue.2, pp.140-158, 2005.
DOI : 10.1016/j.compstruct.2004.09.024

O. Montagnier and C. Hochard, Compression Characterization of High-modulus Carbon Fibers, Journal of Composite Materials, vol.34, issue.1, pp.35-49, 2005.
DOI : 10.1016/S0020-7683(00)00174-8

URL : https://hal.archives-ouvertes.fr/hal-00088202

N. Naik, G. Gopalakrishnan, S. Ganguli, and R. , Design optimization of composites using genetic algorithms and failure mechanism based failure criterion, Composite Structures, vol.83, issue.4, pp.354-367, 2008.
DOI : 10.1016/j.compstruct.2007.05.005

A. Needleman, Material rate dependence and mesh sensitivity in localization problems, Computer Methods in Applied Mechanics and Engineering, vol.67, issue.1, pp.69-85, 1988.
DOI : 10.1016/0045-7825(88)90069-2

W. D. Nelson, B. L. Bunin, and L. J. Hart-smith, Critical joints in large composite aircraft structure, 1983.

P. Odru and C. Sparks, Thick walled composite tubes calculation and measured behavior, International Offshore Mechanics and Arctic Engineering Symposium, 1991.

K. Palanikumar, Experimental investigation and optimisation in drilling of GFRP composites, Measurement, vol.44, issue.10, pp.2138-2148, 2011.
DOI : 10.1016/j.measurement.2011.07.023

P. N. Parkes and R. Butler, Interaction between metallic micro-fasteners and carbon-fibre composite laminates, The 19th International Conference on Composite Materials, 2013.

P. N. Parkes, R. Butler, J. Meyer, D. Oliveira, and A. , Static strength of metal-composite joints with penetrative reinforcement, Composite Structures, vol.118, pp.250-256, 2014.
DOI : 10.1016/j.compstruct.2014.07.019

E. Paroissien, Contribution aux assemblages hybrides, 2006.
URL : https://hal.archives-ouvertes.fr/tel-00171103

E. Paroissien, M. Sartor, and J. Huet, Joints Applied to Aeronautic Parts: Analytical One-Dimensional Models of a Single-Lap Joint, Trends and Recent Advances in Integrated Design and Manufacturing in Mechanical Engineering II, pp.95-110, 2007.

T. V. Parry and A. S. Wronski, Kinking and compressive failure in uniaxially aligned carbon fibre composite tested under superposed hydrostatic pressure, Journal of Materials Science, vol.12, issue.3, pp.893-900, 1982.
DOI : 10.1007/BF00540389

A. Parvizi, K. W. Garrett, and J. E. Bailey, Constrained cracking in glass fibre-reinforced epoxy cross-ply laminates, Journal of Materials Science, vol.8, issue.1, pp.195-201, 1978.
DOI : 10.1007/BF00739291

J. Payan and C. Hochard, Damage modelling of laminated carbon/epoxy composites under static and fatigue loadings, International Journal of Fatigue, vol.24, issue.2-4, pp.299-306, 2002.
DOI : 10.1016/S0142-1123(01)00085-8

N. Perry, J. C. Wahl, C. Bois, A. Pilato, and A. Bernard, Thick composite design for hydrogen vessels: A contribution to composite design method, CIRP Annals, vol.62, issue.1, 2013.
DOI : 10.1016/j.cirp.2013.03.108

URL : https://hal.archives-ouvertes.fr/hal-00948349

E. Persson, I. Eriksson, and L. Zackrisson, Effects of hole machining defects on strength and fatigue life of composite laminates, Composites Part A: Applied Science and Manufacturing, vol.28, issue.2, pp.141-151, 1997.
DOI : 10.1016/S1359-835X(96)00106-6

A. Pilato, Caractérisation des structures composites bobinées épaisses, application à l'étude du comportement de réservoirs de stockage d'hydrogène, 2011.

S. T. Pinho, L. Iannucci, R. , and P. , Physically-based failure models and criteria for laminated fibre-reinforced composites with emphasis on fibre kinking: Part I: Development, Composites Part A: Applied Science and Manufacturing, vol.37, issue.1, pp.63-73, 2006.
DOI : 10.1016/j.compositesa.2005.04.016

S. T. Pinho, P. Robinson, and L. Iannucci, Fracture toughness of the tensile and compressive fibre failure modes in laminated composites, Composites Science and Technology, vol.66, issue.13, pp.2069-2079, 2006.
DOI : 10.1016/j.compscitech.2005.12.023

S. T. Pinho, P. Robinson, and L. Iannucci, Fracture toughness of the tensile and compressive fibre failure modes in laminated composites, Composites Science and Technology, vol.66, issue.13, pp.2069-2079, 2006.
DOI : 10.1016/j.compscitech.2005.12.023

M. Roudgé, Modélisation expérimentale par les réseaux de neurones du perçage multi-materiaux, Thèse de doctorat, 2011.

C. R. Schultheisz and A. M. Waas, Compressive failure of composites, part I: Testing and micromechanical theories, Progress in Aerospace Sciences, vol.32, issue.1, pp.1-42, 1996.
DOI : 10.1016/0376-0421(94)00002-3

C. R. Schultheisz and A. M. Waas, Compressive failure of composites, part I: Testing and micromechanical theories, Progress in Aerospace Sciences, vol.32, issue.1, pp.1-42, 1996.
DOI : 10.1016/0376-0421(94)00002-3

A. Stricher, Tolérancement flexible d'assemblages de grandes Structures aéronautiques, Thèse de doctorat, 2013.

T. Swift, Development of the Fail-safe Design Features of the DC-10 In Damage Tolerance in Aircraft Structures, pp.164-164, 1971.

F. P. Thomas, Experimental Observations for Determining the Maximum Torque Values to Apply to Composite Components Mechanically Joined With Fasteners, 2006.

A. Turon, C. G. Dávila, P. P. Camanho, C. , and J. , An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models, Engineering Fracture Mechanics, vol.74, issue.10, pp.1665-1682, 2007.
DOI : 10.1016/j.engfracmech.2006.08.025

P. Van-der-sypt, M. Chérif, and C. Bois, Analysis of the fatigue behaviour of laminated composite holes subjected to pin-bearing loads, International Journal of Fatigue, vol.103, pp.86-98, 2017.
DOI : 10.1016/j.ijfatigue.2017.05.025

T. J. Vogler, S. Hsu, and S. Kyriakides, Composite failure under combined compression and shear, International Journal of Solids and Structures, vol.37, issue.12, pp.1765-1791, 2000.
DOI : 10.1016/S0020-7683(98)00323-0

J. Wahl, C. Bois, H. Laeuffer, and A. Gillet, Mechanical behavior and gas permeability of composites vessels, 4st International Carbon Composites Conference, 2014.

H. Wang, C. Hung, C. , and F. , Bearing Failure of Bolted Composite Joints. Part I: Experimental Characterization, Journal of Composite Materials, vol.30, issue.12, pp.1284-1313, 1996.
DOI : 10.1177/002199838702100704

C. W. Weaver, W. , and J. G. , Deformation of a carbon-epoxy composite under hydrostatic pressure, Journal of Materials Science, vol.70, issue.8, pp.1323-1333, 1975.
DOI : 10.1007/BF00540822

J. M. Whitney and R. J. Nuismer, Stress Fracture Criteria for Laminated Composites Containing Stress Concentrations, Journal of Composite Materials, vol.8, issue.3, pp.253-265, 1974.
DOI : 10.1520/STP36479S

D. H. Woolstencroft, A. R. Curtis, and R. I. Haresceugh, A comparison of test techniques used for the evaluation of the unidirectional compressive strength of carbon fibre-reinforced plastic, Composites, vol.12, issue.4, pp.275-280, 1981.
DOI : 10.1016/0010-4361(81)90018-5

Y. Wu, R. Shivpuri, L. , and L. J. , Effect of Macro and Micro Voids on Elastic Properties of Polymer Composites, Journal of Reinforced Plastics and Composites, vol.14, issue.15, pp.1391-1402, 1998.
DOI : 10.1115/1.3424603

M. Xia, H. Takayanagi, and K. Kemmochi, Analysis of multi-layered filament-wound composite pipes under internal pressure, Composite Structures, vol.53, issue.4, pp.483-491, 2001.
DOI : 10.1016/S0263-8223(01)00061-7

Y. Xiao and T. Ishikawa, Bearing strength and failure behavior of bolted composite joints (part I: Experimental investigation), Composites Science and Technology, vol.65, issue.7-8, pp.1022-1031, 2005.
DOI : 10.1016/j.compscitech.2005.02.011

Y. Xiong, An analytical method for failure prediction of multi-fastener composite joints, International Journal of Solids and Structures, vol.33, issue.29, pp.4395-4409, 1996.
DOI : 10.1016/0020-7683(95)00231-6

T. Yokozeki, T. Ogasawara, and T. Ishikawa, Evaluation of gas leakage through composite laminates with multilayer matrix cracks: Cracking angle effects, Composites Science and Technology, vol.66, issue.15, pp.2815-2824, 2006.
DOI : 10.1016/j.compscitech.2006.02.024

Y. Zhao, Torque limit for bolted joint for composites Part A: TTTC properties of, 2002.