I. Partie, Étude de l'influence de la taille de la précipitation ??, p.151

I. Partie, Éléments bibliographiques sur l'oxydation des superalliages, p.173

V. Partie and .. Andrieu, 243 -Chapitre V - Fatigue ? Temps de MaintienOxidation Assisted Intergranular Cracking in Alloy 718 : Effects of Strain Rate and Temperature, AerospaceLabDevelopment of Damage Tolerant Microstructures in UDIMET, vol.720, issue.90, pp.1-7, 1988.

. Beardmore, On The TemperatureModeling of the Influence of Oxidation on Thin-Walled Specimens of Single Crystal SuperalloysDevelopment of superalloysEffects of Cooling Rate and ?? Morphology on Creep and Stress-Rupture Properties of a Powder Metallurgy SuperalloyComportement et endommagement en fatigue et fatigue-fluage à haute température de différents états microstructuraux du superalliage base-nickel Udimet 720Introduction to the high-temperature oxidation of metalsStructure refinement by a liquid metal cooling solidification process for single-crystal nickel-base superalloysAtom probe tomography investigation of the microstructure of superalloys N18, Thèse de doctorat -École Nationale Supérieure de Mécanique et d'Aérotechnique Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science2012) [Cadel et al, pp.1537-1545, 1969.

. Cao, Improvement of Creep strength in a nickel-base single-crystal superalloy by heat treatmentCreep deformation anisotropy in single crystal superalloysComportement et endommagement en fluage à haute temperature du superalliage forgé à base de nickel Udimet 720Oxidation-assisted creep damage in a wrought nickel-based superalloy: Experiments and modellingOxidation behavior of several chromia-forming commercial nickel-base superalloys, 718-Alloys -ALLVAC 718Plus Alloy Development Thèse de doctorat -École Nationale Supérieure des Mines deProcédé de traitement thermique des alliages à haute teneur en nickel et en chrome, pp.91-99, 1930.

. Mitchell, Grain growth behaviour during near-?? solvus thermal exposures in a polycrystalline nickel-base superalloy, Acta Materialia, vol.61, issue.9, pp.3378-3391, 2013.

. Cui, Microstructural Evolution and Mechanical Properties of a Ni-Based SuperalloyPhase stability and yield stress of Ni-base superalloys containing high Co and TiOn the shearing mechanism of ?' precipitates by a single a/6 <112> Shockley partial in Nibased superalloysOn the mechanism of shear of ?? precipitates by single (a/2)<110> dissociated matrix dislocations in Ni-based superalloysHigh resolution imaging of shearing configurations of ?' precipitates in Ni-based superalloysBoron and Zirconium from Crucible Refractories in a Complex Heat-Resistant AlloyMechanical properties and development of supersolvus heat treated new nickel base superalloy AD730TM, Scripta Metallurgica et Materiala MATEC Web of Conferences2014) [Devaux et al., 2010] A. Devaux, E. Georges, P. Héritier "Properties of New C&W Superalloys for High Temperature Disk Applications 7th International Symposium on Superalloy 718 and Derivatives, TMS: WarrendaleDevaux et al., 2011] A. Devaux, E. Georges, P. Héritier "Development of New C&W Superalloys for High Temperature Disk Applications, pp.282-291, 1958.

F. Hantcherli, A. Pettinari-sturmel, and . Superalloydevaux, Gamma double prime precipitation kinetic in Alloy 718AD730 TM -A New Nickel-Based Superalloy for High Temperature Engine Rotative PartsObservations of directional gamma prime coarsening during engine operation, 8th International Symposium on Superalloy 718 and DerivativesDrouelle, 2017] E. Drouelle "Relations microstructure, propriétés mécaniques et résistance à l'oxydation de la phase MAX Ti3AlC2, pp.521-535, 1989.

]. S. Dubiez-le and . Goffducrocq, Comportement et Endommagement d'un Superalliage Elaboré par Compression Isostatique à Chaud A New Damage Tolerant PM Superalloy for High Temperature Turbine DiscsSome effects of hafnium additions on the mechanical properties of a columnar-grained nickelbase superalloyThe Microstructure of Superalloys, Thèse de doctorat -Université de Poitiers Thèse de doctorat -École Nationale Supérieure des Mines de, pp.63-72, 1971.

. Dye, Characterization and modeling of quenching-induced residual stresses in the nickel-based superalloy IN718A mechanism for stress-aided grain boundary oxidation ahead of cracksEffet du vieillissement du superalliage base nickel N18 pour disques de turbines sur sa durabilité en fatigue et en fatigue-fluage à 700 °COn the role of ? particles within ?' precipitates on damage accumulation in the P/M nickel-base superalloy N18Mechanical BehaviorAnalysis of shot-peening and residual stress relaxation in the nickel-based superalloy RR1000, Thèse de doctorat -École Nationale Supérieure de Mécanique et d'Aérotechnique Superalloys II, 9Wiley, pp.1703-1713, 1987.

. Furrer, ????? formation in superalloy U720LI, Scripta Materialia, vol.40, issue.11, pp.1215-1220, 1999.
DOI : 10.1016/S1359-6462(99)00094-9

. Furrer, Fatigue resistance of the grain size transition zone in a dual microstructure superalloy diskUse of slow strain rate tensile testing to assess the ability of several superalloys to resist environmentally assisted intergranular crackingOn the prediction of the yield stress of unimodal and multimodal ?? Nickel-base superalloysEffects of B , C , and Zr on the Structure and Properties of a P/M Nickel Base SuperalloyThe effect of dual microstructure heat treatment on an advanced nickel-base disk alloyFatigue crack initiation and propagation in several nickel-base superalloys at 650 C, Microstructure and Mechanical Property Development in Superalloy U720LI 8th International Symposium on Superalloy 718 and Derivatives) [Gayda, 2001] J. Gayda "Dual Microstructure Heat Treatment of a Nickel-Base Disk Alloy, pp.415-424, 1983.

. Giggins, Oxidation of Ni-Cr-Al Alloys Between 1000° and 1200°COxidation of Ni-Cr-AI Alloys Between 1000 C and 1200 C", Transactions of The Metallurgical Society of AIMEPropulseur Par Réaction Sur L'AirYield point phenomena in metals and alloysProcédés de refusion VAR et ESRDeveloping damage tolerance and creep resistance in a high strength nickel alloy for disc applications, Springer Science & Business Media, pp.1782-2495, 1922.

. Hong, The effect of grain boundary serration on creep resistance in a wrought nickel-based superalloyCreep-fatigue behavior of turbine disc of superalloy GH720Li at 650°C and probabilistic creepfatigue modelingExperimental study on creep-fatigue interaction behavior of GH4133B superalloyInteraction of Dislocations with Coherent, Stree-Free Ordered ParticlesFatigue, Creep And Creep/Fatigue Behaviour of a Nickel Base Superalloy at 700°C, Materials Science and Engineering: A, pp.125-131, 1978.

. Jain, The Development of Improved Performance PM Udimet 720 Turbine DisksReview The role of alloying elements in the design of nickel-base superalloys, Journal of Materials Science, vol.19, pp.785-794, 1984.

. Jones, Neural networkMicrostructure and mechanical properties evolutions of alloy 718 during isothermal and thermal cycling over-agingInfluence of secondary precipitates and crystallographic orientation on the strength of single crystals of a Ni-based superalloyPart II. Effects of grain-boundary structure on the path of cracking in polycrystalsThe problem of the temperature coefficient of tensile creep rateAllvac® 718Plus TM , Superalloy for the Next Forty YearsOxidation ahead of a crack tip in an advanced Ni-based superalloy, 2016) [Kakehi, pp.417-424, 1938.

. Klarstrom, On the effect of boron on the mechanical properties of a new polycrystalline superalloyOn the effect of boron on the mechanical properties of a new polycrystalline superalloyDevelopment and Introduction of a Damage Tolerant High Temperature Nickel-Base Disk Alloy, Rene88DTBrittle intergranular fracture of a Ni-base superalloy at high temperatures by dynamic embrittlementMécanismes de déformation et d'amorçage de fissures dans l'Udimet TM 720Li en relation avec les paramètres microstructurauxGrain boundary?slip bands interactions: Impact on the fatigue crack initiation in a polycrystalline forged Ni-based superalloyA time-temperature relationship for rupture and creep stressesMetallurgical Factors Affecting the Crack Growth Resistance of a SuperalloyInfluence of grain size on the mechanical behaviour of some high strength materials, Property Relationships in Solid-Solution Strengthened Superalloys MATEC Web of Conferences Thèse de doctorat -École Nationale Supérieure de Mécanique et d'Aérotechnique Thèse de doctorat -École Nationale Supérieure de Mécanique et d'Aérotechnique, pp.61-553, 1952.

. Laurence, Impact of the Solution Cooling Rate and of Thermal Aging on the Creep Properties of the New Cast & Wrought Ren?? 65 Ni-Based Superalloy, 8th International Symposium on Superalloy 718 and Derivatives, TMS: Warrendale, pp.333-348, 2004.
DOI : 10.1016/j.msea.2014.02.046

. Li, Effects of microstructure on high temperature dwell fatigue crack growth in a coarse grain PM nickel based superalloy, Acta Materialia, vol.90, pp.355-369, 2015.
DOI : 10.1016/j.actamat.2015.02.023

. Liu, Dynamic embrittlement of boron-doped Ni3Al alloys at 600°CEtude du superalliage C&W A&D AD730Etude du superalliage C&W A&D AD730 -Résultats complémentaires avril 2015On the Role of Tertiary ?? Precipitates in the Creep Behaviour at 700 °C of a PM Disk SuperalloyOptimisation of the mechanical Properties of a New PM Superalloy for Disk ApplicationsThe influence of molybdenum on the ?'phase in experimental nickel-base superalloys, Acta Metallurgica Rapport Interne -ONERA Rapport Interne -ONERA Metallurgical Transactions, vol.35, issue.34, pp.643-649, 1972.

. Mao, Cooling precipitation and strengthening study in powder metallurgy superalloy Rene88DT, Materials Science and Engineering: A, vol.332, issue.1-2, pp.318-329, 2002.
DOI : 10.1016/S0921-5093(01)01758-0

. Masoumi, Kinetics and Mechanisms of ????? Reprecipitation in a Ni-based Superalloy, Scientific Reports, vol.16, issue.414, p.28650, 2016.
DOI : 10.1179/030634582790427019

. Maurer, Role of Cobalt in Waspaloy TMS: WarrendaleOn the mechanism of premature in-service failure nickel-base superalloy gas turbine bladesMechanisms of Damage and Fracture in of a Cast Nickel-Based SuperalloyCrystallographic fatigue crack initiation in nickel-based superalloy René 88DT at elevated temperature, Merica, 1926] P.D. Merica "Nickel Alloys and Method of Making the Same, pp.43-52, 1926.

. Monkman, An empirical relationship between rupture life and minimum creep rate in creep-rupture testsNew Phacomp and its Applications to Alloy DesignCreep behaviour of Ni-base single-crystal superalloys with various ?? volume fractionFifty-year study of the Peierls-Nabarro stressThe Physics of CreepMathematical Model of Phase Transformations and Elasto-Plastic Stress in the Water Spray Quenching of Steel Bars INational Aeronautics and Space Association, 2010] National Aeronautics and Space Association "Measurement Uncertainty Analysis Principles and MethodsEnvironmentally-assisted grain boundary attack as a mechanism of embrittlement in a nickelbased superalloyNovel techniques to assess environmentally-assisted cracking in a Nickel-based superalloyStructural-gradient-materials produced by gradient temperature heat treatment for dual-property turbine discThe Creep of Steel at High TemperaturesOxygen-induced intergranular cracking of a Ni-base alloy at elevated temperatures -An example of dynamic embrittlement, Connor "Process Development & Microstructure & Mechanical Property Evaluation of a Dual Microstructure Heat Treated Advanced Nickel Disc AlloyEleventh International Symposium), TMS: Warrendale Materials Science and Engineering: A Pang, P.A.S. Reed "Microstructure effects on high temperature fatigue crack initiation and short crack growth in turbine disc nickel-base superalloy Udimet 720Li", Materials Science and Engineering: A, pp.347-356, 1901.

. Pineau, High temperature fatigue of nickel-base superalloys ? A review with special emphasis on deformation modes and oxidationDirectional coarsening in nickel-base single crystals with high volume fractions of coherent precipitatesNickel-Based Superalloys for Advanced Turbine Engines: Chemistry, Microstructure and PropertiesThe recrystallization of nickel-base superalloys, Poulain, 2011] T. Poulain "Liens entre microstructure, traitements thermiques et caractéristiques mécaniques pour un nouveau superalliage base nickel, pp.2668-2697, 1981.

. Rabbe, Essais de fatigue Partie I, Techniques de l'Ingénieur, pp.1-21, 2000.

. Sabol, Microstructure of Nickel-Based Superalloys, physica status solidi (b), vol.61, issue.1, pp.11-52, 1969.
DOI : 10.1007/978-1-4899-5880-8

. Saint-antonin-de-fluageschafrik, Application of Alloy 718 in GE Aircraft Engines: Past, Present and Next Five YearsDevelopment of Udiemet 720 for High Strength Disk Applications, and Various Derivatives, pp.1-14, 1984.

. Simonetti, A History of Superalloy Metallurgy for Superalloy MetallurgistsHigh-Temperature OxidationIntroduction to grains, phases, and interfaces -an interpretation of microstructureEtude de la déformation intergranulaire au cours du fluage à haute température d'un superalliage à base de nickel polycristallinCreep behavior under isothermal and non-isothermal conditions of AM3 single crystal superalloy for different solutioning cooling ratesTransverse Creep of Nickel-Base Superalloy BicrystalsInfluence of TCP phase and its morphology on creep properties of single crystal nickel-based superalloys, Superalloys II, 11Wiley Thèse de Institut National Polytechnique de, pp.1-12, 1948.

P. Dumont, P. Villechaise, D. Bocher, E. Texier, F. Georges et al., Mechanical Properties of Cast & Wrought Hybrid Disks, pp.539-548, 2016.

. Takahashi, Creep characteristics and internal stress in ?-TiAlCreep Rupture Strength And Grain-Boundary Sliding In Austenitic 21Cr-4Ni-9Mn Steels With Serrated Grain Boundaries, Materials Science and Engineering A Journal of Materials Science, vol.23, pp.329-331, 1988.

. Thibault, Influence of microstructure on local intra- and intergranular deformations during creep of a nickel-based superalloy at 700??C, Materials Science and Engineering: A, vol.588, issue.21, pp.14-21, 1971.
DOI : 10.1016/j.msea.2013.09.015

URL : https://hal.archives-ouvertes.fr/hal-00934984

. Versnyder, The development of columnar grain and single crystal high temperature materials through directional solidificationIntergranular crack tip oxidation in a Ni-base superalloyInfluence de la microstructure sur le comportement en fatigue-fluage du superalliage polycristallin AD730Theoretical analysis of the diffusion processes determining the oxidation rate of alloysBeitrag zur theorie des anlaufvorgangsNickel-Base Superalloy OxidationResidual stress distributions and their influence on fatigue lifetimesThermogravimétrie, Thèse de doctorat -Institut National des Sciences Appliquées de Toulouse -CEMES (France) Zeitschrift fu? r Physikalische Chemie BImprovements relating to the Propulsion of Aircraft and Other Vehicles "Strains, planes, and EBSD in materials science, pp.234-236, 1931.

. Wisniewski, Influence of grain-boundary morphology on creep of a wrought Ni-base superalloyThe Oxidation of Hastelloy Alloy X The Metallurgical Society of AIMEThe Oxidation of René 41 and Udimet 700 The Metallurgical Society of AIMEThe structure of Rene 88DT, Materials Science and Engineering: A Energy Materials, vol.230, issue.11, pp.510-511, 1964.

. Xie, Effect of heat treatment atmosphere on surface recrystallization of a directionally solidified Ni-base superalloy, Scripta Materialia, vol.59, issue.8, pp.59-858, 2008.
DOI : 10.1016/j.scriptamat.2008.06.032

. Xu, Relationship between Ti/Al ratio and stress-rupture properties in nickel-based superalloy, Materials Science and Engineering: A, vol.544, issue.47412, pp.48-53, 2008.
DOI : 10.1016/j.msea.2012.03.006

. Haradazhong, Effect of Solution Temperature on the Microstructure and Mechanical Properties of a Newly Developed Superalloy TMW-4M3Mechanical properties and fracture modes of an advanced Ni?Co-base disk superalloy at elevated temperatures, Metallurgical and Materials Transactions A Materials Characterization, vol.43, issue.67, pp.1017-1025, 2011.

. Zrn??kzrn??k, Influence of hold period on creep ? fatigue deformation behaviour of nickel base superalloy, Materials Science and Engineering A, issue.321, pp.319-637, 2001.

F. Figure, Spectres EDS de 2 oxydes retrouvés et quantifiés dans l'AD730? ? Échantillon GG oxydé à 900°C pendant 100 h (voir Figure F-1.a.) (a) Spectre EDS d'un oxyde d'Aluminium (probablement Al2O3) (b)