D. Quantin, «Galvanisation à chaud ? procédé,» Techniques de l'Ingénieur, 2004.

G. Béranger, Le livre de l'acie, pp.635-656, 1994.

A. R. Marder, The metallurgy of zinc-coated steel, Progress in Materials Science, pp.191-271, 2000.
DOI : 10.1016/S0079-6425(98)00006-1

D. Cocco, F. Lacoviello, and S. Natali, «Damaging micromechanisms in hot-dip galvanizing Zn based coatings, Theoretical and Applied Fracture Mechanics, pp.91-98, 2014.

A. Alvarez-pampliega, T. Hauffman, M. Petrova, T. Breugelmans, T. Musellea et al., Corrosion study on Al-rich metal-coated steel by odd random phase multisine electrochemical impedance spectroscopy, Electrochimica Acta, vol.124, pp.165-175, 2014.
DOI : 10.1016/j.electacta.2013.09.159

A. C. Lacerda-de-oliveira and P. R. Rios, A novel iron enrichment isothermal kinetic model proposal for galvanneal coatings, Journal of Materials Research and Technology, vol.2, issue.2, pp.117-124, 2013.
DOI : 10.1016/j.jmrt.2013.01.001

I. Hertveldt, «Hot dip galvanizing and galvannealing of Ti and Nb stabilized interstitial free high strength steels, 2000.

J. B. Vogt, O. Boussac, and J. Foct, «Prediction of fatigue resistance of a hot-dip galvanized steel,» Fatigue & Fracture of, Engineering Materials & Structures, vol.23, pp.33-39, 2001.

G. Reumont, J. B. Vogt, A. Iost, and J. Foct, The effects of an Fe???Zn intermetallic-containing coating on the stress corrosion cracking behavior of a hot-dip galvanized steel, Surface and Coatings Technolog, pp.265-271, 2001.
DOI : 10.1016/S0257-8972(01)01017-9

G. M. Song, T. Vystavel, N. Van-der-persa, J. T. De-hosson, and W. G. , Relation between microstructure and adhesion of hot dip galvanized zinc coatings on dual phase steel, Acta Materialia, vol.60, issue.6-7, pp.2973-2981, 2012.
DOI : 10.1016/j.actamat.2012.02.003

R. Ramanauska, Structural factor in Zn alloy electrodeposit corrosion, Applied Surface Science, vol.153, issue.1, pp.53-64, 1999.
DOI : 10.1016/S0169-4332(99)00334-7

R. Ramanauskas, P. Quintana, P. Bartolo-pérez, and L. , Effect of Corrosion Products on the Atmospheric Corrosion of Electrodeposited Zinc and Zinc Alloy Coatings, CORROSION, vol.56, issue.6, pp.588-597, 2000.
DOI : 10.5006/1.3280562

G. D. Wilcox and D. R. Gabe, Electrodeposited zinc alloy coatings, Corrosion Science, vol.35, issue.5-8, pp.1251-1258, 1993.
DOI : 10.1016/0010-938X(93)90345-H

M. Morishita, K. Koyama, M. Murase, and Y. Mori, Improvement in the Corrosion Resistance of Zinc-plated Steel by Electrodeposition of Magnesium from a Molten Salt., ISIJ International, vol.36, issue.6, pp.714-719, 1996.
DOI : 10.2355/isijinternational.36.714

S. Schuerz, M. Fleischanderl, G. H. Luckeneder, K. Preis, T. Haunschmied et al., Corrosion behaviour of Zn???Al???Mg coated steel sheet in sodium chloride-containing environment, Corrosion Science, vol.51, issue.10, pp.2355-2363, 2009.
DOI : 10.1016/j.corsci.2009.06.019

M. Dutta, A. K. Halder, and S. B. Singh, Morphology and properties of hot dip Zn???Mg and Zn???Mg???Al alloy coatings on steel sheet, Surface and Coatings Technology, vol.205, issue.7, pp.2578-2584, 2010.
DOI : 10.1016/j.surfcoat.2010.10.006

M. S. Azevedo, «Mécanismes de corrosion de l'acier revêtu d'alliage à base de ZnMgAl en tests accélérés et en environnement naturel, 2014.

S. Schuerz, M. Fleischanderl, G. H. Luckeneder, K. Preis, T. Haunschmied et al., Kneissl, «Corrosion protection of Zn-Al-Mg coated steel with and without plastic deformation in chloride containing environment, Journal of the institute of corrosion, vol.99, p.9, 2011.

P. Qiu, C. Leygraf, and I. O. , Evolution of corrosion products and metal release from Galvalume coatings on steel during short and long-term atmospheric exposures, Materials Chemistry and Physics, vol.133, issue.1, pp.419-428, 2012.
DOI : 10.1016/j.matchemphys.2012.01.054

A. R. Moreira, Z. Panossian, P. L. Camargo, M. F. Moreira, I. C. Da-silva et al., Zn/55Al coating microstructure and corrosion mechanism, Corrosion Science, vol.48, issue.3, pp.564-576, 2006.
DOI : 10.1016/j.corsci.2005.02.012

H. E. Townsend and A. R. Borzillo, «Thirty year atmospheric corrosion performance of 55% aluminum-zinc alloy-coated sheet steel, » Materials Performance, vol.35, pp.30-36, 1996.

. Galvinfo, «Galvalume coated steel sheet,» n° %112, 2003.

T. Lowe, «Using band microelectrode arrays to investigate the cut edge and bare corrosion behaviour of 55% AL-ZN coated steel, 2010.

L. Huafei, Z. Jiashen, and Y. , Dunyi, «Behavior of hot-dip 55% Al-Zn alloy coating in salt water containing hydrogen sulfide, » Materials Performance, vol.40, pp.32-36, 2001.

R. P. Edavan and R. Kopinski, Corrosion resistance of painted zinc alloy coated steels, Corrosion Science, vol.51, issue.10, pp.2429-2442, 2009.
DOI : 10.1016/j.corsci.2009.06.028

M. S. Azevedo, C. Allély, K. Ogle, and P. , Corrosion mechanisms of Zn(Mg,Al) coated steel: 2. The effect of Mg and Al alloying on the formation and properties of corrosion products in different electrolytes, Corrosion Science, vol.90, pp.482-490, 2015.
DOI : 10.1016/j.corsci.2014.07.042

P. Quintana, L. Veleva, W. Cauich, R. Pomes, and J. L. Pena, Study of the composition and morphology of initial stages of corrosion products formed on Zn plates exposed to the atmosphere of southeast Mexico, Applied Surface Science, vol.99, issue.4, pp.325-334, 1996.
DOI : 10.1016/0169-4332(96)00597-1

Q. Cheng, S. Song, L. Song, and B. , Effect of Relative Humidity on the Initial Atmospheric Corrosion Behavior of Zinc during Drying, Journal of the Electrochemical Society, vol.160, issue.8, pp.380-389, 2013.
DOI : 10.1149/2.078308jes

X. G. Zhang, « Corrosion and electrochemistry of zinc, pp.241-281, 1996.
DOI : 10.1007/978-1-4757-9877-7

K. Miki, K. Shimogori, H. Satoh, K. Ikeda, S. Nomura et al., Terada, «Corrosion behaviour of cold rolled nd zinc alloy plated steel sheets in various kinds of corrosion tests, ISIJ, vol.72, pp.202-209, 1986.

W. Miao, I. S. Cole, A. K. Neufeld, and S. Furman, Pitting Corrosion of Zn and Zn-Al Coated Steels in pH 2 to 12 NaCl Solutions, Journal of The Electrochemical Society, vol.40, issue.1, pp.7-15, 2007.
DOI : 10.1016/S0257-8972(99)00170-X

S. Liu, H. Sun, L. Sun, and H. , Effects of pH and Cl??? concentration on corrosion behavior of the galvanized steel in simulated rust layer solution, Corrosion Science, vol.65, pp.520-527, 2012.
DOI : 10.1016/j.corsci.2012.08.056

Z. Y. Chen, D. Persson, and C. Leygraf, Initial NaCl-particle induced atmospheric corrosion of zinc???Effect of CO2 and SO2, Corrosion Science, vol.50, issue.1, pp.111-123, 2008.
DOI : 10.1016/j.corsci.2007.06.005

J. E. Svensson and L. G. Johansson, A laboratory study of the initial stages of the atmospheric corrosion of zinc in the presence of NaCl; Influence of SO2 and NO2, Corrosion Science, vol.34, issue.5, pp.721-740, 1993.
DOI : 10.1016/0010-938X(93)90096-Y

S. Oesch and M. , Environmental effects on materials: The effect of the air pollutants SO2, NO2, NO and O3 on the corrosion of copper, zinc and aluminium. A short literature survey and results of laboratory exposures, Corrosion Science, vol.39, issue.9, pp.1505-1530, 1997.
DOI : 10.1016/S0010-938X(97)00047-4

T. Falk, J. E. Svensson, and L. G. , The Role of Carbon Dioxide in the Atmospheric Corrosion of Zinc, Journal of The Electrochemical Society, vol.145, issue.1, pp.39-44, 1998.
DOI : 10.1149/1.1838207

P. R. Seré, M. Zapponi, C. I. Elsner, A. R. Di, and . Sarli, Comparative corrosion behaviour of 55Aluminium???zinc alloy and zinc hot-dip coatings deposited on low carbon steel substrates, Corrosion Science, vol.40, issue.10, pp.1711-1723, 1998.
DOI : 10.1016/S0010-938X(98)00073-0

D. De-la-fuente, J. G. Castano, and M. Morcillo, Long-term atmospheric corrosion of zinc, Corrosion Science, vol.49, issue.3, pp.1420-1436, 2007.
DOI : 10.1016/j.corsci.2006.08.003

M. Morcillo, B. Chico, D. De-la-fuente, and J. , Simancas, «Looking back on contributions in the field of atmospheric corrosion offered by the MICAT Ibero-American Testing Network, International Journal of Corrosion, vol.2012, 2012.

E. Palma, B. Fernandez, and M. Morcillo, Long-term atmospheric cathodic protection of 55 % Al-Zn coating on steel and its comparison with galvanized steel, Materials and Corrosion/Werkstoffe und Korrosion, vol.1, issue.11, pp.765-769, 1997.
DOI : 10.1002/maco.19970481107

R. Ramanauskas, L. Muleshkov, L. Maldonado, and P. , Characterization of the corrosion behaviour of Zn and Zn alloy electrodeposits: Atmospheric and accelerated tests, Corrosion Science, vol.40, issue.2-3, pp.401-410, 1998.
DOI : 10.1016/S0010-938X(97)00144-3

C. Leygraf, I. O. Wallinder, J. Tidblad, and T. , Atmospheric Corrosion, p.123, 2016.

N. Lebozec, N. Blandin, and D. Thierry, Accelerated corrosion tests in the automotive industry: A comparison of the performance towards cosmetic corrosion, Materials and Corrosion, vol.53, issue.11, pp.889-894, 2008.
DOI : 10.1002/maco.200804168

T. Prosek, N. Lebozec, and D. Thierry, Application of automated corrosion sensors for monitoring the rate of corrosion during accelerated corrosion tests, Materials and Corrosion, vol.81, issue.5, pp.448-456, 2014.
DOI : 10.6028/jres.081A.011

T. Prosek, D. Thierry, C. Taxen, and J. , Maixner, «Effect of cations on corrosion of zinc and carbon steel covered with chloride deposits under atmospheric conditions, Corrosion Science, vol.48, pp.2676-2693, 2007.

C. K. Angeli and D. Riener, Stifter, «Evolution of the surface chemistry of hot dip galvanized Zn?Mg? Al and Zn coatings on steel during short term exposure to sodium chloride containing environments, Corrosion Science, vol.91, pp.311-320, 2015.

M. S. Azevedo, C. Allély, K. Oglea, and P. , Corrosion mechanisms of Zn(Mg, Al) coated steel in accelerated tests and natural exposure: 1. The role of electrolyte composition in the nature of corrosion products and relative corrosion rate, Corrosion Science, vol.90, pp.472-481, 2015.
DOI : 10.1016/j.corsci.2014.05.014

P. Volovitch, T. N. Vu, C. Allély, A. Aal, and K. , Understanding corrosion via corrosion product characterization: II. Role of alloying elements in improving the corrosion resistance of Zn???Al???Mg coatings on steel, Corrosion Science, vol.53, issue.8, pp.2437-2445, 2011.
DOI : 10.1016/j.corsci.2011.03.016

T. Prosek, J. Hagström, D. Persson, N. Fuertes, F. Lindberg et al., Effect of the microstructure of Zn-Al and Zn-Al-Mg model alloys on corrosion stability, «Effect of the microstructure of Zn-Al and Zn-Al-Mg model alloys on corrosion stability, pp.71-81, 2016.
DOI : 10.1016/j.corsci.2016.04.022

S. Jiang, C. Yue, and Q. Zhang, Coating Structure and Corrosion Resistance Behavior of Hot Dip Zn-Al-Mg-Si Alloy Coating Steel Sheet, Advanced Materials Research, vol.834, issue.836, pp.1-2834, 2013.
DOI : 10.4028/www.scientific.net/AMR.834-836.601

«. %. Galvinfo, Aluminum-zinc alloy-coated steel sheet, p.152, 2011.

X. Zhang, T. N. Vu, P. Volovitch, C. Leygraf, K. Ogle et al., The initial release of zinc and aluminum from non-treated Galvalume and the formation of corrosion products in chloride containing media, Applied Surface Science, vol.258, issue.10, pp.4351-4359, 2012.
DOI : 10.1016/j.apsusc.2011.12.112

C. Leygraf, I. O. Wallinder, J. Tidblad, and T. , Atmospheric Corrosion, p.211, 2016.

X. Zhang, C. Leygraf, and I. O. Wallinder, Atmospheric corrosion of Galfan coatings on steel in chloride-rich environments, Corrosion Science, vol.73, pp.62-71, 2013.
DOI : 10.1016/j.corsci.2013.03.025

Z. Panossian, L. Mariaca, M. Morcillo, S. Flores, J. Rocha et al., Steel cathodic protection afforded by zinc, aluminium and zinc/aluminium alloy coatings in the atmosphere, Surface and Coatings Technology, vol.190, issue.2-3, pp.244-248, 2005.
DOI : 10.1016/j.surfcoat.2004.04.023

T. N. Vu, «Selective dissolution from Zn-Al alloy coatings on steel

P. R. Seré, M. Zapponi, C. I. Elsner, A. R. Di, and . Sarli, Comparative corrosion behaviour of 55Aluminium???zinc alloy and zinc hot-dip coatings deposited on low carbon steel substrates, Corrosion Science, vol.40, issue.10, pp.1711-1723, 1998.
DOI : 10.1016/S0010-938X(98)00073-0

A. Q. Vu, B. Vuillemin, R. Oltra, and C. , Cut-edge corrosion of a Zn???55Al-coated steel: A comparison between sulphate and chloride solutions, Corrosion Science, vol.53, issue.9, pp.3016-3025, 2011.
DOI : 10.1016/j.corsci.2011.05.048

A. P. Yadav, H. Katayama, K. Noda, H. Masuda, A. Nishikata et al., Effect of Al on the galvanic ability of Zn???Al coating under thin layer of electrolyte, Electrochimica Acta, vol.52, issue.7, pp.2411-2422, 2007.
DOI : 10.1016/j.electacta.2006.08.050

X. G. Zhang and E. M. Valeriote, Galvanic protection of steel and galvanic corrosion of zinc under thin layer electrolytes, Corrosion Science, vol.34, issue.12, pp.1957-1972, 1993.
DOI : 10.1016/0010-938X(93)90053-J

A. Tomandl and E. Labrenz, The corrosion behavior of ZnAlMg alloys in maritime environments, Materials and Corrosion, vol.30, issue.12, pp.1286-1293, 2016.
DOI : 10.1179/bcj.1998.33.1.53

S. Takeshi, Y. Fukio, M. Yasushi, and A. , Atsushi, «Corrosion products of hot-dip Zn-6%Al-3%Mg coated steel sheet subjected to atmospheric exposure, Tetsu-to-Hagane, vol.89, pp.166-173, 2003.

N. Lebozec, D. Thierry, A. Peltola, L. Luxem, G. Luckeneder et al., Corrosion performance of Zn-Mg-Al coated steel in accelerated corrosion tests used in the automotive industry and field exposures, Materials and Corrosion, vol.145, issue.11, pp.969-978, 2013.
DOI : 10.1149/1.1838753

P. Volovitch, C. Allely, and K. Ogle, Understanding corrosion via corrosion product characterization: I. Case study of the role of Mg alloying in Zn???Mg coating on steel, Corrosion Science, vol.51, issue.6, pp.1251-1262, 2009.
DOI : 10.1016/j.corsci.2009.03.005

A. Komatsu, H. Izutan, T. Tsujimura, A. Andoh, and T. , Corrosion Resistance and Protection Mechanism of Hot-dip Zn-Al-Mg Alloy Coated Steel Sheetunder Accelerated Corrosion Environment, Tetsu-to-Hagane, vol.86, issue.8, pp.534-541, 2000.
DOI : 10.2355/tetsutohagane1955.86.8_534

D. Persson, D. Thierry, N. Lebozec, and T. , In situ infrared reflection spectroscopy studies of the initial atmospheric corrosion of Zn???Al???Mg coated steel, Corrosion Science, vol.72, pp.54-63, 2013.
DOI : 10.1016/j.corsci.2013.03.005

N. Lebozec, D. Thierry, M. Rohwerder, D. Persson, G. Luckeneder et al., Effect of carbon dioxide on the atmospheric corrosion of Zn???Mg???Al coated steel, Corrosion Science, vol.74, pp.379-386, 2013.
DOI : 10.1016/j.corsci.2013.05.011

B. Li, A. Dong, G. Zhu, S. Chu, H. Qian et al., Investigation of the corrosion behaviors of continuously hot-dip galvanizing Zn???Mg coating, Surface and Coatings Technology, vol.206, issue.19-20, pp.3989-3999, 2012.
DOI : 10.1016/j.surfcoat.2012.03.079

T. Prosek, N. Larche, M. Vlot, F. Goodwin, and D. Thierry, Corrosion performance of Zn-Al-Mg coatings in open and confined zones in conditions simulating automotive applications, Materials and Corrosion, vol.50, pp.412-420, 2010.
DOI : 10.1002/maco.200905425

Y. Hamlaoui, F. Pedraza, and L. Tifouti, Corrosion monitoring of galvanised coatings through electrochemical impedance spectroscopy, Corrosion Science, vol.50, issue.6, pp.1558-1566, 2008.
DOI : 10.1016/j.corsci.2008.02.010

V. Barranco, S. Feliu, and S. Feliu, EIS study of the corrosion behaviour of zinc-based coatings on steel in quiescent 3% NaCl solution. Part 1: directly exposed coatings, Corrosion Science, vol.46, issue.9, pp.2203-2220, 2004.
DOI : 10.1016/j.corsci.2003.09.032

Y. Liu, H. Li, and Z. Li, «EIS Investigation and Structural Characterization of Different Hot-Dipped Zinc-Based Coatings in 3.5% NaCl solution, International Journal of Electrochemical Science, vol.8, pp.7753-7767, 2013.

M. E. Orazem and B. , Tribollet, «Equivalent circuit analogs,Chapter 9,» chez Electrochemical impedance spectroscopy, pp.156-162, 2008.

M. C. Li, M. Royer, D. Stien, A. Lecante, and C. , Inhibitive effect of sodium eperuate on zinc corrosion in alkaline solutions, Corrosion Science, vol.50, issue.7, pp.1975-1981, 2008.
DOI : 10.1016/j.corsci.2008.04.019
URL : https://hal.archives-ouvertes.fr/hal-01082607

V. Barranco, S. Feliu, and S. Feliu, EIS study of the corrosion behaviour of zinc-based coatings on steel in quiescent 3% NaCl solution. Part 2: coatings covered with an inhibitor-containing lacquer, Corrosion Science, vol.46, issue.9, pp.2221-2240, 2004.
DOI : 10.1016/j.corsci.2003.09.033

G. W. Walter, The application of impedance spectroscopy to study the uptake of sodium chloride solution in painted metals, Corrosion Science, vol.32, issue.10, pp.1041-1058, 1991.
DOI : 10.1016/0010-938X(91)90093-5

M. A. Dominguez-crespo, E. Onofre-bustamante, A. M. Torres-huerta, F. J. Rodriguez-gomez, S. E. Rodil et al., Synthesis and Characterization of Chromate Conversion Coatings on GALVALUME and Galvanized Steel Substrates, Metallurgical and Materials Transactions A, vol.29, issue.7, pp.1631-1644, 2009.
DOI : 10.1007/978-1-4757-9877-7

W. Liu, M. C. Li, Q. Luoa, H. Q. Fan, J. Y. Zhang et al., Influence of alloyed magnesium on the microstructure and long-term corrosion behavior of hot-dip Al???Zn???Si coating in NaCl solution, Corrosion Science, vol.104, pp.217-226, 2016.
DOI : 10.1016/j.corsci.2015.12.014

C. I. Elsner, P. R. Seré, A. R. Di, and . Sarli, Al-Zn Steel Sheets: Results of 12 Years of Exposure, International Journal of Corrosion, vol.23, issue.1, pp.1-16, 2012.
DOI : 10.1016/0033-0655(93)80006-V

C. Yao, S. L. Tay, T. Zhu, H. Shang, and W. , Effects of Mg content on microstructure and electrochemical properties of Zn???Al???Mg alloys, Journal of Alloys and Compounds, vol.645, pp.131-136, 2015.
DOI : 10.1016/j.jallcom.2015.05.010

C. Yao, H. Lv, T. Zhu, W. Zheng, X. Yuan et al., Effect of Mg content on microstructure and corrosion behavior of hot dipped Zn???Al???Mg coatings, Journal of Alloys and Compounds, vol.670, pp.239-248, 2016.
DOI : 10.1016/j.jallcom.2016.02.026

R. Shah, J. A. Dilewijns, and R. D. Jones, The structure and deformation behavior of zinc-rich coatings on steel sheet, Journal of Materials Engineering and Performance, vol.25, issue.No. 9, pp.601-608, 1996.
DOI : 10.1007/BF02670143

J. Cai, J. Li, Q. Chao, E. Pavlina, and P. Hodgson, Grain Size and Texture Study of Controlled Skin-Passed Hot-Dip Galvanized Coating, Advanced High Strength Steel and Press Hardening, pp.256-260, 2015.
DOI : 10.1142/9789813140622_0043

R. Parisot, Microstructure, déformation et endommagement d'un revêtement de zinc sur tôle d'acier, l'Ecole Nationale, 2001.

R. Parisot, S. Forest, A. Pineau, F. Nguyen, X. Demonet et al., Deformation and damage mechanisms of zinc coatings on hot-dip galvanized steel sheets: Part I. Deformation modes, Metallurgical and Materials Transactions A, vol.11, issue.3, pp.797-811, 2004.
DOI : 10.1179/095066067790138184
URL : https://hal.archives-ouvertes.fr/hal-00172912

C. Maeda, J. Shimomura, H. Fujisawa, and M. Konishi, The structure and deformation behavior of hot-dip galvanized coatings, Scripta Materialia, vol.35, issue.3, pp.333-338, 1996.
DOI : 10.1016/1359-6462(96)00160-1

E. A. Sacco, N. B. Alvarez, J. D. Culcasi, C. I. Elsner, A. R. Di et al., Effect of the plastic deformation on the electrochemical behavior of metal coated steel sheets, Surface and Coatings Technology, vol.168, issue.2-3, pp.115-122, 2003.
DOI : 10.1016/S0257-8972(03)00263-9

E. S. Gadelmawla, M. M. Koura, T. M. Maksoud, I. M. Elewa, and H. H. Soliman, Roughness parameters, Journal of Materials Processing Technology, vol.123, issue.1, pp.133-145, 2002.
DOI : 10.1016/S0924-0136(02)00060-2

C. Gabrielli, «Méthode électrochimiques -Mesures d'impédances,» Techniques de l'ingénieur, Réf P2210 V1, 1994.

D. D. Macdonald, Reflections on the history of electrochemical impedance spectroscopy, Electrochimica Acta, vol.51, issue.8-9, pp.1376-1388, 2006.
DOI : 10.1016/j.electacta.2005.02.107

A. J. Bard and L. R. Faulkner, Electrochimique : Principes, méthodes et application, pp.7-15, 1983.

Z. L. Long, Y. C. Zhou, and L. Xiao, Characterization of black chromate conversion coating on the electrodeposited zinc???iron alloy, Applied Surface Science, vol.218, issue.1-4, pp.123-136, 2003.
DOI : 10.1016/S0169-4332(03)00572-5

S. H. Zhang, B. Yang, G. Kong, and J. Lu, «Electrochemical analysis of molybdate conversion coating on hot-dip galvanized steel in various growth stages,» Surface and Interface Analysis, 2017.

X. Zhang, C. Van-den-bos, W. G. Sloof, A. Hovestad, H. Terryn et al., Comparison of the morphology and corrosion performance of Cr(VI)- and Cr(III)-based conversion coatings on zinc, Surface and Coatings Technology, vol.199, issue.1, pp.92-104, 2005.
DOI : 10.1016/j.surfcoat.2004.12.002

M. E. Orazem, N. Pébère, and B. Tribollet, Enhanced Graphical Representation of Electrochemical Impedance Data, Journal of The Electrochemical Society, vol.51, issue.4, pp.129-136, 2006.
DOI : 10.1149/1.2054888

G. J. Brug, A. L. Van-den-eeden, M. Sluyters-rehbach, and J. H. , Sluyters, «The analysis of electrode impedance complicated by the complicated by the presence of a constant element, J. Electroanal. Chem, pp.275-295, 1984.

R. De-levie, «Electrochemical response of porous and rough electrodes,» Advances in electrochemistry and electrochemical engineering, pp.329-397, 1967.

R. Y. Chen and D. J. Willis, «The behavior of silicon in the solidification of Zn-55Al-1.6Si coating on steel,» Metallurgical and materials transactions A Références bibliographies 155, pp.117-128, 2005.

R. Y. Chen and D. Yuen, Microstructure and Crystallography of Zn-55Al-1.6Si Coating Spangle on Steel, Metallurgical and materials transactions A, pp.4711-4723, 2012.
DOI : 10.1007/s11661-998-0144-8