. Bp, Statistical Review of World Energy -Natural gas, 2016.

Y. H. Yu, B. G. Kim, and D. G. Lee, Cryogenic reliability of the sandwich insulation board for LNG ship, Composite Structures, vol.95, issue.0, pp.95-547, 2013.
DOI : 10.1016/j.compstruct.2012.07.007

K. Morimoto, T. Suzuki, and R. Yosomiya, Thermal conductivity and thermal expansion behavior of glass fiber-reinforced rigid polyurethane foam, Polymer Engineering and Science, vol.4, issue.12, pp.24-943, 1984.
DOI : 10.6028/jres.037.015

C. Tseng, M. Yamaguchi, and T. Ohmori, Thermal conductivity of polyurethane foams from room temperature to 20 K, Cryogenics, vol.37, issue.6, pp.305-312, 1997.
DOI : 10.1016/S0011-2275(97)00023-4

J. Kuhn, Thermal transport in polystyrene and polyurethane foam insulations, International Journal of Heat and Mass Transfer, vol.35, issue.7, pp.1795-1801, 1992.
DOI : 10.1016/0017-9310(92)90150-Q

L. Glicksman, Heat transfer in foams, in Low density cellular plastics, pp.104-152, 1994.

U. Jarfelt and O. Ramnäs, Thermal conductivity of polyurethane foam Best performance, 10th International Symposium on District Heating and Cooling, 2006.

J. Wu, W. Sung, and H. Chu, Thermal conductivity of polyurethane foams, International Journal of Heat and Mass Transfer, vol.42, issue.12, pp.42-2211, 1999.
DOI : 10.1016/S0017-9310(98)00315-9

Y. Tao, P. Li, and L. Cai, Effect of Fiber Content on Sound Absorption, Thermal Conductivity, and Compression Strength of Straw Fiber-filled Rigid Polyurethane Foams, BioResources, vol.11, issue.2, pp.4159-4167, 2016.
DOI : 10.15376/biores.11.2.4159-4167

Y. Okumoto, Structural Design Loads, in Design of Ship Hull Structures, pp.17-32, 2009.

K. H. Kim, S. H. Yoon, and D. G. Lee, Vibration isolation of LNG containment systems due to sloshing with glass fiber composite, Composite Structures, vol.94, issue.2, pp.469-476, 2012.
DOI : 10.1016/j.compstruct.2011.08.008

M. H. Kim, Cryogenic Fatigue Strength Assessment for MARK-III Insulation System of LNG Carriers, Cryogenic Fatigue Strength Assessment for MARK-III Insulation System of LNG Carriers p. 44. 14. Veritas, Ecole National EPJ Web of Conferences. 2010. EDP Sciences Organic Polymer Chemistry, pp.41401-41411, 1969.
DOI : 10.1016/j.oceaneng.2010.05.004

K. Bagdi, K. Molnár, and B. Pukánszky, Thermal analysis of the structure of segmented polyurethane elastomers, Journal of Thermal Analysis and Calorimetry, vol.31, issue.3, pp.98-825, 2009.
DOI : 10.1007/s10973-009-0528-z

B. S. Lee, Structure and Thermomechanical Properties of Polyurethane Block Copolymers with Shape Memory Effect, Macromolecules, vol.34, issue.18, pp.6431-6437, 2001.
DOI : 10.1021/ma001842l

S. M. Kang, S. J. Lee, and B. K. Kim, Shape memory polyurethane foams. Express Polymer Letters, pp.63-69, 2012.
DOI : 10.3144/expresspolymlett.2012.7

URL : http://doi.org/10.3144/expresspolymlett.2012.7

P. S. Patel, D. E. Shepherd, and D. W. Hukins, Compressive properties of commercially available polyurethane foams as mechanical models for osteoporotic human cancellous bone, BMC Musculoskeletal Disorders, vol.38, issue.1, pp.137-2700, 2006.
DOI : 10.1016/j.jbiomech.2004.09.027

B. Song, The effects of strain rate, density, and temperature on the mechanical properties of polymethylene diisocyanate (PMDI)-based rigid polyurethane foams during compression, Journal of Materials Science, vol.49, issue.2, pp.351-357, 2009.
DOI : 10.1016/j.ijmecsci.2007.04.003

L. Chang, Y. Xue, and F. Hsieh, Comparative study of physical properties of water-blown rigid polyurethane foams extended with commercial soy flours, Journal of Applied Polymer Science, vol.3, issue.1, pp.10-19, 2001.
DOI : 10.1520/STP15367S

J. Gibson, L. , M. F. Ashby, Y. H. , B. G. Kim et al., Cellular Solids: Structure and Properties Cryogenic reliability of composite insulation panels for liquefied natural gas (LNG) ships. Composite Structures, pp.94-462, 1999.

Y. H. Yu, Cryogenic characteristics of chopped glass fiber reinforced polyurethane foam, Composite Structures, vol.107, pp.476-481, 2014.
DOI : 10.1016/j.compstruct.2013.08.017

A. Denay, Compression behavior of glass-fiber-reinforced and pure polyurethane foams at negative temperatures down to cryogenic ones, Journal of Cellular Plastics, vol.49, issue.3, pp.209-222, 2013.
DOI : 10.1177/0021955X11435915

S. J. Kim, Strength evaluation of lng containment system considering fluidstructure interaction under sloshing impact pressure in 26th International Conference on Offshore Mechanics and Arctic Engineering Fatigue strength assessment of MARK-III type LNG cargo containment system. Ocean Engineering, 18TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, vol.37, pp.14-15, 2007.

Y. Zhang, The durability of clear polyurethane coil coatings studied by FTIR peak fitting, Polymer Degradation and Stability, vol.98, issue.2, pp.527-534, 2013.
DOI : 10.1016/j.polymdegradstab.2012.12.003

V. Kova?evi?, Role of the polyurethane component in the adhesive composition on the hydrolytic stability of the adhesive, International Journal of Adhesion and Adhesives, vol.13, issue.2, pp.126-136, 1993.
DOI : 10.1016/0143-7496(93)90024-4

A. Boubakri, Investigations on hygrothermal aging of thermoplastic polyurethane material, Materials & Design, vol.30, issue.10, pp.3958-3965, 2009.
DOI : 10.1016/j.matdes.2009.05.038

T. M. Chapman, Models for polyurethane hydrolysis under moderately acidic conditions: A comparative study of hydrolysis rates of urethanes, ureas, and amides, Journal of Polymer Science Part A: Polymer Chemistry, vol.27, issue.6, p.27, 1989.
DOI : 10.1002/pola.1989.080270620

P. A. Gunatillake, Polyurethane elastomers based on novel polyether macrodiols and MDI: Synthesis, mechanical properties, and resistance to hydrolysis and oxidation, Journal of Applied Polymer Science, vol.46, issue.2, pp.319-328, 1992.
DOI : 10.1002/app.1992.070460213

T. Hatakeyama, Glass transition of rigid polyurethane foams derived from sodium lignosulfonate mixed with diethylene, triethylene and polyethylene glycols, Thermochimica Acta, vol.416, issue.1-2, pp.29-33, 2004.
DOI : 10.1016/j.tca.2002.12.002

L. Jiao, Thermal degradation characteristics of rigid polyurethane foam and the volatile products analysis with TG-FTIR-MS. Polymer Degradation and Stability, pp.98-2687, 2013.

D. ?erban, Evaluation of the mechanical and morphological properties of long fibre reinforced polyurethane rigid foams Polymer Testing Mechanical properties of rigid polyurethane foams at room and cryogenic temperatures, Journal of Cellular Plastics, vol.49, issue.4, pp.121-127, 2011.

V. Yakushin and U. , Cabulis, and I. Sevastyanova, Effect of Filler Type on the Properties of Rigid Polyurethane Foams at a Cryogenic Temperature, Mechanics of Composite Materials, pp.447-454, 2015.

M. Zaslawsky, Multiaxial-stress studies on rigid polyurethane foam, Experimental Mechanics, vol.13, issue.3, pp.70-76, 1973.
DOI : 10.1007/BF02322385

M. Zieleniewska, Development and applicational evaluation of the rigid polyurethane foam composites with egg shell waste Polymer Degradation and Stability, 2015. 47 Structure-property relationships of flexible polyurethane foams, Polymer, issue.11, pp.38-2819, 1997.

J. C. Moreland, G. L. Wilkes, and R. B. Turner, Viscoelastic behavior of flexible slabstock polyurethane foams: Dependence on temperature and relative humidity. I. Tensile and compression stress (load) relaxation, Journal of Applied Polymer Science, vol.52, issue.4, pp.549-568, 1994.
DOI : 10.1002/app.1994.070520411

R. Singh, P. Davies, and A. K. Bajaj, Identification of Nonlinear and Viscoelastic Properties of Flexible Polyurethane Foam, Nonlinear Dynamics, vol.34, issue.3/4, pp.3-4, 2003.
DOI : 10.1023/B:NODY.0000013511.07097.87

S. W. White, Experimental Techniques and Identification of Nonlinear and Viscoelastic Properties of Flexible Polyurethane Foam, Nonlinear Dynamics, vol.22, issue.3, pp.281-313, 2000.
DOI : 10.1023/A:1008302208269

R. A. Neff and T. M. Marsalko, Roles of Conventional Polyol and Isocyanate in Humid Aging and Durability of Molded Seating Foam, Journal of Cellular Plastics, vol.35, issue.6, pp.492-513, 1999.
DOI : 10.1177/0021955X8402000106

S. B. Lin, Segmental orientation studies of polyether polyurethane block copolymers with different hard segment lengths and distributions. Colloid and Polymer Science, pp.128-140, 1985.

J. V. Cauich-rodríguez, Degradation of Polyurethanes for Cardiovascular Applications Advances in Biomaterials Science and Biomedical Applications. 2013. 54. Gorna, K. and S. Gogolewski, Preparation, degradation, and calcification of biodegradable polyurethane foams for bone graft substitutes, Journal of Biomedical Materials Research Part A, issue.3, pp.67-813, 2003.

F. Chen and Z. Lu, Liquefaction of wheat straw and preparation of rigid polyurethane foam from the liquefaction products, Journal of Applied Polymer Science, vol.74, issue.1, pp.508-516, 2009.
DOI : 10.1002/app.29107

Y. H. Yu, Cryogenic characteristics of chopped glass fiber reinforced polyurethane foam, Composite Structures, vol.107, issue.0, pp.476-481, 2014.
DOI : 10.1016/j.compstruct.2013.08.017

K. Aou, Characterization of polyurethane hard segment length distribution using soft hydrolysis/MALDI and Monte Carlo simulation, Polymer, vol.54, issue.18, pp.54-5005, 2013.
DOI : 10.1016/j.polymer.2013.07.014

A. Boubakri, Impact of aging conditions on mechanical properties of thermoplastic polyurethane, Materials & Design, vol.31, issue.9, pp.31-4194, 2010.
DOI : 10.1016/j.matdes.2010.04.023

URL : https://hal.archives-ouvertes.fr/hal-00510028

A. Pegoretti, Hydrolytic resistance of model poly (ether urethane ureas) and poly (ester urethane ureas) Journal of applied polymer science Hydrolytic degradation and functional stability of a segmented shape memory poly(ester urethane) Polymer Degradation and Stability, pp.577-586, 1998.

M. M. Coleman, Hydrogen bonding in polymer blends. 1. FTIR studies of urethane-ether blends, Macromolecules, vol.21, issue.1, pp.59-65, 1988.
DOI : 10.1021/ma00179a014

A. K. Mishra, FT-IR and XPS studies of polyurethane-urea-imide coatings, Progress in Organic Coatings, vol.55, issue.3, pp.231-243, 2006.
DOI : 10.1016/j.porgcoat.2005.11.007

Z. S. Petrovi?, I. Javni, ?. J. Semsarzadeh, and M. A. , The effect of segment length and concentration on dielectric properties of polypropyleneoxide-based polyurethanes The effect of hard segments on the gas separation properties of polyurethane membranes Structural characterization and mass transfer properties of segmented polyurethane: influence of block length of hydrophilic segments, Colloid and Polymer Science Iranian Polymer Journal Polymer International, vol.267, issue.16125, pp.1077-1086, 1989.

W. Luo and Y. , Hydrogen-Bonding Properties of Segmented Polyether Poly(urethane urea) Copolymer, Macromolecules, vol.30, issue.15, pp.4405-4409, 1997.
DOI : 10.1021/ma951386e

C. Wilhelm and J. Gardette, Infrared analysis of the photochemical behaviour of segmented polyurethanes, Polymer, vol.39, issue.5, pp.39-5973, 1998.
DOI : 10.1016/S0032-3861(97)00353-4

D. Apostol and D. Constantinescu, Temperature and speed of testing influence on the densification and recovery of polyurethane foams. Mechanics of Time-Dependent Materials, 2013, pp.111-136

K. Bagdi, Specific interactions, structure and properties in segmented polyurethane elastomers. 70. Candia, F. and R. Russo, Effect of water vapour on the aging of a polyurethane elastomer, Journal of thermal analysis, issue.6, pp.30-1325, 1985.
DOI : 10.3144/expresspolymlett.2011.41

URL : http://doi.org/10.3144/expresspolymlett.2011.41

C. Hou, Mechanical response of hard bio-based PU foams under cyclic quasi-static compressive loading conditions, International Journal of Fatigue, vol.59, issue.0, pp.59-76, 2014.
DOI : 10.1016/j.ijfatigue.2013.09.012

I. Javni, W. Zhang, and Z. S. Petrovi?, Effect of different isocyanates on the properties of soybased polyurethanes, Journal of Applied Polymer Science, issue.13, pp.88-2912, 2003.

J. E. Mcbane, J. P. Santerre, and R. S. Labow, The interaction between hydrolytic and oxidative pathways in macrophage-mediated polyurethane degradation, Journal of Biomedical Materials Research Part A, vol.73, issue.4, pp.984-994, 2007.
DOI : 10.3109/10428190009065825

Y. Chen, The polyurethane membranes with temperature sensitivity for water vapor permeation, Journal of Membrane Science, vol.287, issue.2, pp.192-197, 2007.
DOI : 10.1016/j.memsci.2006.10.028

M. Xu, Structure and morphology of segmented polyurethanes: 4. Domain structures of different scales and the composition heterogeneity of the polymers, Polymer, vol.28, issue.13, pp.28-2183, 1987.
DOI : 10.1016/0032-3861(87)90373-9

G. T. Howard, Polyurethane Biodegradation, International Biodeterioration & Biodegradation Journal of Applied Polymer Science, vol.49, issue.48, pp.245-252, 1999.
DOI : 10.1007/978-3-642-23789-8_14

S. Park, Effect of the blowing agent on the low-temperature mechanical properties of CO2- and HFC-245fa-blown glass-fiber-reinforced polyurethane foams, Composites Part B: Engineering, vol.93, issue.93, pp.317-327, 2016.
DOI : 10.1016/j.compositesb.2016.03.008

E. Yilgör, Comparison of hydrogen bonding in polydimethylsiloxane and polyether based urethane and urea copolymers, Polymer, vol.41, issue.3, pp.849-857, 2000.
DOI : 10.1016/S0032-3861(99)00245-1

K. Chen, Soft-and hard-segment phase segregation of polyester-based polyurethane, 81. Kapps, M. and S. Buschkamp, Production de mousses polyuréthannes (PUR) rigides. Insulation Information Technique, pp.99-109, 2001.
DOI : 10.1002/polb.1993.090310713

B. Jérôme, Fabrication des mousses en polyuréthane. Techniques de l'ingénieur Plasturgie : procédés spécifiques aux composites, 2009.

P. Pichon, Fatigue thermomécanique des élastoméres polyurethane : Caracterisation expérimentale de l'évolution des microstructures et modélisation des échanges thermiques, 2010.

A. Zlatani?, Effect of structure on properties of polyols and polyurethanes based on different vegetable oils, Journal of Polymer Science Part B: Polymer Physics, vol.3, issue.5, pp.809-819, 1983.
DOI : 10.1002/polb.10737

P. Pissis, Water effects in polyurethane block copolymers, Journal of Polymer Science Part B: Polymer Physics, vol.34, issue.9, pp.1529-1539, 1996.
DOI : 10.1002/(SICI)1099-0488(19960715)34:9<1529::AID-POLB1>3.0.CO;2-G

D. J. Martin, The effect of average soft segment length on morphology and properties of a series of polyurethane elastomers. II. SAXS-DSC annealing study, Journal of Applied Polymer Science, vol.64, issue.4, pp.803-817, 1997.
DOI : 10.1002/(SICI)1097-4628(19970425)64:4<803::AID-APP20>3.0.CO;2-T

C. Prisacariu, Morphological features and thermal and mechanical response in segmented polyurethane elastomers based on mixtures of isocyanates, Polymer Journal, vol.22, issue.4, pp.43-613, 2011.
DOI : 10.1016/j.polymer.2005.08.083

T. Wen, The effect of DMPA units on ionic conductivity of PEG???DMPA???IPDI waterborne polyurethane as single-ion electrolytes, Polymer, vol.40, issue.14, pp.40-3979, 1999.
DOI : 10.1016/S0032-3861(98)00625-9

U. ?ebenik and M. Krajnc, Influence of the soft segment length and content on the synthesis and properties of isocyanate-terminated urethane prepolymers, International Journal of Adhesion and Adhesives, vol.27, issue.7, pp.27-527, 2007.
DOI : 10.1016/j.ijadhadh.2006.10.001

L. Y. Wang, Effect of soft segment length on the thermal behaviors of fluorinated polyurethanes, European Polymer Journal, vol.41, issue.2, pp.293-301, 2005.
DOI : 10.1016/j.eurpolymj.2004.09.017

E. Pellizzi and S. Park, Etude du vieillissement des mousses de polyuréthane ester et consolidation par les aminoalkylalkoxysilanes. 2012, Evry-Val d'Essonne. 97 Polymeric foams for cryogenic temperature application: Temperature range for non-recovery and brittle-fracture of microstructure. Composite Structures, pp.258-269, 2016.

J. I. Velasco, Foaming behaviour and cellular structure of LDPE/hectorite nanocomposites, Polymer, vol.48, issue.7, pp.2098-2108, 2007.
DOI : 10.1016/j.polymer.2007.02.008

N. J. Mills and H. X. Zhu, The high strain compression of closed-cell polymer foams, Journal of the Mechanics and Physics of Solids, vol.47, issue.3, pp.47-669, 1999.
DOI : 10.1016/S0022-5096(98)00007-6

E. E. Saenz, L. A. Carlsson, and A. M. Karlsson, In situ analysis of fatigue crack propagation in polymer foams, Engineering Fracture Mechanics, vol.101, issue.0, pp.23-32, 2013.
DOI : 10.1016/j.engfracmech.2012.10.009

L. Gong, S. Kyriakides, and W. Y. Jang, Compressive response of open-cell foams. Part I: Morphology and elastic properties, International Journal of Solids and Structures, vol.42, issue.5-6, pp.42-47, 2005.
DOI : 10.1016/j.ijsolstr.2004.07.023

L. Gong and S. Kyriakides, Compressive response of open cell foams Part II: Initiation and evolution of crushing, International Journal of Solids and Structures, vol.42, issue.5-6, pp.5-6, 2005.
DOI : 10.1016/j.ijsolstr.2004.07.024

K. Kanny, Dynamic mechanical analyses and flexural fatigue of PVC foams, Composite Structures, vol.58, issue.2, pp.175-183, 2002.
DOI : 10.1016/S0263-8223(02)00160-5

E. Linul, Study of factors influencing the mechanical properties of polyurethane foams under dynamic compression, Journal of Physics: Conference Series, vol.451, issue.1, p.12002, 2013.
DOI : 10.1088/1742-6596/451/1/012002

A. Denay, Size effect in glass fiber reinforced and pure polyurethane foams in monotonic and creep compression, Journal of Cellular Plastics, vol.48, issue.3, pp.48-221, 2012.
DOI : 10.1016/j.compscitech.2006.03.009

D. Han, The effects of glass fiber reinforcement on the mechanical behavior of polyurethane foam, Journal of Mechanical Science and Technology, vol.22, issue.1, pp.263-266, 2010.
DOI : 10.1007/s12206-009-1136-3

C. Lee, A temperature- and strain-rate-dependent isotropic elasto-viscoplastic model for glass-fiber-reinforced polyurethane foam, Materials & Design, vol.84, pp.163-172, 2015.
DOI : 10.1016/j.matdes.2015.06.086

I. Gestis, Substance Database -1,1-Dichloro-1-fluoroethane R 141b Available from, 2009.

X. Cao, Polyurethane/clay nanocomposites foams: processing, structure and properties, Polymer, vol.46, issue.3, pp.775-783, 2005.
DOI : 10.1016/j.polymer.2004.11.028

J. Zhou, Thermomechanical analyses of phenolic foam reinforced with glass fiber mat, Materials & Design, vol.51, issue.0, pp.51-131, 2013.
DOI : 10.1016/j.matdes.2013.04.030

C. Lee and J. Lee, Failure analysis of reinforced polyurethane foam-based LNG insulation structure using damage-coupled finite element analysis, Composite Structures, vol.107, issue.0, pp.231-245, 2014.
DOI : 10.1016/j.compstruct.2013.07.044

A. Pegoretti, M. L. Accorsi, and A. T. Dibenedetto, Fracture toughness of the fibre-matrix interface in glass-epoxy composites, Journal of Materials Science, vol.10, issue.5, pp.31-6145, 1996.
DOI : 10.1007/BF00354431

P. Neogi, Diffusion in polymers, 1996.

B. Yang, Effects of moisture on the thermomechanical properties of a polyurethane shape memory polymer, Polymer, vol.47, issue.4, pp.1348-1356, 2006.
DOI : 10.1016/j.polymer.2005.12.051

T. K. Chen, Y. I. Tien, and K. H. Wei, Synthesis and characterization of novel segmented polyurethane/clay nanocomposites, Polymer, vol.41, issue.4, pp.1345-1353, 2000.
DOI : 10.1016/S0032-3861(99)00280-3

I. Yilgör and E. Yilgör, Hydrophilic polyurethaneurea membranes: influence of soft block composition on the water vapor permeation rates, Polymer, vol.40, issue.20, pp.40-5575, 1999.
DOI : 10.1016/S0032-3861(98)00766-6

A. Woli?ska-grabczyk, Effect of the hard segment domains on the permeation and separation ability of the polyurethane-based membranes in benzene/cyclohexane separation by pervaporation, Journal of Membrane Science, vol.282, issue.1-2, pp.225-236, 2006.
DOI : 10.1016/j.memsci.2006.05.026

M. C. Tanzi, Chemical stability of polyether urethanes versus polycarbonate urethanes, Journal of Biomedical Materials Research, vol.26, issue.4, pp.550-559, 1997.
DOI : 10.1002/jbm.820260302

L. Tatai, Thermoplastic biodegradable polyurethanes: The effect of chain extender structure on properties and in-vitro degradation, Biomaterials, vol.28, issue.36, pp.28-5407, 2007.
DOI : 10.1016/j.biomaterials.2007.08.035

V. Jacques and F. Bruno, Vieillissement physique des matériaux polymères. Techniques de l'ingénieur Matériaux: résistance à la corrosion et au vieillissement, 2005.

M. Adamson, Thermal expansion and swelling of cured epoxy resin used in graphite/epoxy composite materials, Journal of Materials Science, vol.98, issue.2, pp.1736-1745, 1980.
DOI : 10.1115/1.3443342

B. E. Sar, Couplage diffusion d'humidité/ états mécaniques internes dans les polymères et composites -une approche thermodynamique, 17èmes Journées Nationales sur les Composites (JNC17), 2011.

J. Crank, The mathematics of diffusion, 1979.

L. Gac, P. Y. , D. Choqueuse, and D. Melot, Description and modeling of polyurethane hydrolysis used as thermal insulation in oil offshore conditions, Polymer Testing, issue.8, pp.32-1588, 2013.

V. Jacques, Action de l'eau sur les plastiques, base documentaire : TIB152DUO(ref. article : am3165), 2000.

L. Gac and P. Y. , Durability of polychloroprene rubber for marine application, 2014.
URL : https://hal.archives-ouvertes.fr/tel-01132912

V. Jacques and R. Emmanuel, Vieillissement chimique des polymères Physicochimie de la stabilisation

V. Jacques and R. Emmanuel, Vieillissement chimique des polymères Cinétique de dégradation, base documentaire : TIB152DUO(ref. article : am3152), 2011.

A. Takahara, Effect of soft segment chemistry on the biostability of segmented polyurethanes. II.In vitro hydrolytic degradation and lipod sorption, Journal of Biomedical Materials Research, vol.10, issue.6, pp.801-818, 1992.
DOI : 10.1021/ba-1982-0199.ch025

M. R. Salazar, Degradation of a poly(ester urethane) elastomer. III. Estane 5703 hydrolysis: Experiments and modeling, Journal of Polymer Science Part A: Polymer Chemistry, vol.89, issue.8, pp.41-1136, 2003.
DOI : 10.1021/ja00982a016

M. Partini and R. Pantani, FTIR analysis of hydrolysis in aliphatic polyesters Polymer Degradation and Stability, pp.92-1491, 2007.

O. Connor and C. , Acidic and basic amide hydrolysis, Quarterly Reviews, Chemical Society, vol.24, issue.4, pp.553-564, 1970.
DOI : 10.1039/qr9702400553

W. W. Müller and T. Pretsch, Hydrolytic aging of crystallizable shape memory poly(ester urethane): Effects on the thermo-mechanical properties and visco-elastic modeling, European Polymer Journal, vol.46, issue.8, pp.46-1745, 2010.
DOI : 10.1016/j.eurpolymj.2010.05.004

R. Smith, D. F. Williams, and C. Oliver, The biodegradation of poly(ether urethanes), Journal of Biomedical Materials Research, vol.18, issue.9, pp.1149-1165, 1987.
DOI : 10.1002/jbm.820210908

V. C. Chang and J. Kennedy, Gas permeability, water absorption, hydrolytic stability and airoven aging of polyisobutylene-based polyurethane networks, Polymer Bulletin, vol.8, pp.2-4, 1982.

A. Gugliuzza and E. Drioli, A review on membrane engineering for innovation in wearable fabrics and protective textiles, Journal of Membrane Science, vol.446, issue.0, pp.446-350, 2013.
DOI : 10.1016/j.memsci.2013.07.014

S. Nakao, Determination of pore size and pore size distribution, Journal of Membrane Science, vol.96, issue.1-2, pp.131-165, 1994.
DOI : 10.1016/0376-7388(94)00128-6

L. Pilon, A. G. Fedorov, and R. Viskanta, Gas Diffusion in Closed-Cell Foams, Journal of Cellular Plastics, vol.16, issue.3, 2000.
DOI : 10.1177/109719639702000406

Q. Ma and Z. Chen, Numerical study on gas diffusion in isotropic and anisotropic fractal porous media (gas diffusion in fractal porous media), International Journal of Heat and Mass Transfer, vol.79, issue.79, pp.925-929, 2014.
DOI : 10.1016/j.ijheatmasstransfer.2014.08.064

A. Sabbahi, J. Bouzon, and J. M. Vergnaud, Modelling of the drying process of polyurethane foam, European Polymer Journal, vol.28, issue.3, pp.305-309, 1992.
DOI : 10.1016/0014-3057(92)90194-7

A. Sabbahi, J. Bouzon, and J. M. Vergnaud, Absorption-desorption history of water at 100?? by polyurethane foam, European Polymer Journal, vol.30, issue.5, pp.657-660, 1994.
DOI : 10.1016/0014-3057(94)90077-9

A. Sabbahi and J. M. Vergnaud, Absorption of water at 100??C by polyurethane foam, European Polymer Journal, vol.27, issue.8, pp.845-850, 1991.
DOI : 10.1016/0014-3057(91)90021-F

A. Sabbahi and J. M. Vergnaud, Absorption of water by polyurethane foam. modelling and experiments, European Polymer Journal, vol.29, issue.9, pp.1243-1246, 1993.
DOI : 10.1016/0014-3057(93)90155-9

M. Saha, Moisture absorption behavior and its effect on flexure properties of polyurethane foams, 2008.

H. Adão, Water absorption by cellular polymers, Journal of Materials Science Letters, vol.9, issue.13, pp.1129-1131, 1996.
DOI : 10.1007/BF00539957

Z. Huo, Experimentation and simulation of moisture diffusion in foam-cored polyurethane sandwich structure, Journal of Sandwich Structures & Materials, vol.31, issue.1, pp.30-49, 2015.
DOI : 10.1109/95.623021

S. Oprea, V. O. Potolinca, and C. D. Varganici, Synthesis and properties of polyurethane urea with pyridine-2,6-dicarboxamide moieties in their structure, RSC Advances, vol.142, issue.1???6, pp.106904-106913, 2016.
DOI : 10.1016/j.jlumin.2013.02.048

L. Cai and Y. Weitsman, Non-Fickian Moisture Diffusion in Polymeric Composites, Journal of Composite Materials, vol.28, issue.2, pp.130-154, 1994.
DOI : 10.1016/B978-0-444-70507-5.50013-5

URL : http://www.dtic.mil/cgi-bin/GetTRDoc?AD=ADA257919&Location=U2&doc=GetTRDoc.pdf

A. Durier, Contribution à l'étude de l'interaction contraintes-diffusion dans les polymères, 2008.

X. Lefebvre, D. Choqueuse, and P. Chauchot, Durability of syntactic foams for deep offshore insulation: modelling of water uptake under representative ageing conditions in order to predict the evolution of buoyancy and thermal conductivity. Oil & Gas Science and Technology-Revue de l'IFP, pp.165-178, 2009.

C. Chen, Composition, thermal and tensile properties of polyurethane-urea-silica hybrids, RSC Advances, vol.96, issue.25, pp.9729-9738, 2013.
DOI : 10.1016/j.polymdegradstab.2011.06.015

G. J. Pearson, Long term water sorption and solubility of composite filling materials, Journal of Dentistry, vol.7, issue.1, pp.64-68, 1979.
DOI : 10.1016/0300-5712(79)90041-1

B. Das, Restricted equilibrium swelling???A true measure of adhesion between short fibers and rubber, Journal of Applied Polymer Science, vol.17, issue.4, pp.1019-1030, 1973.
DOI : 10.1002/app.1973.070170403

S. Varghese, Effect of Adhesion on the Equilibrium Swelling of Short Sisal Fiber Reinforced Natural Rubber Composites, Rubber Chemistry and Technology, vol.68, issue.1, pp.37-49, 1995.
DOI : 10.5254/1.3538730

A. Simar, Simar, Effect of water absorption on the properties of organic matrix/woven fabric composite manufactured by RTM process : Evidence of coupling between water absorption and thermo-oxidation of the matrix

A. Chilali, Effect of geometric dimensions and fibre orientation on 3D moisture diffusion in flax fibre reinforced thermoplastic and thermosetting composites, Composites Part A: Applied Science and Manufacturing, vol.95, pp.95-75, 2017.
DOI : 10.1016/j.compositesa.2016.12.020

C. Shen and G. S. Springer, Moisture Absorption and Desorption of Composite Materials, Journal of Composite Materials, vol.10, issue.1, pp.2-20, 1976.
DOI : 10.1177/002199836700100206

L. Bao and A. F. Yee, Moisture diffusion and hygrothermal aging in bismaleimide matrix carbon fiber composites???part I: uni-weave composites, Composites Science and Technology, vol.62, issue.16, pp.62-2099, 2002.
DOI : 10.1016/S0266-3538(02)00161-6

L. R. Grace and M. C. Altan, Non-fickian three-dimensional hindered moisture absorption in polymeric composites: Model development and validation, Polymer Composites, vol.35, issue.7, pp.34-1144, 2013.
DOI : 10.1016/j.compositesa.2004.03.008

L. R. Grace and M. C. Altan, Characterization of anisotropic moisture absorption in polymeric composites using hindered diffusion model, Composites Part A: Applied Science and Manufacturing, vol.43, issue.8, pp.43-1187, 2012.
DOI : 10.1016/j.compositesa.2012.03.016

S. Neumann and G. Marom, Free-volume dependent moisture diffusion under stress in composite materials, Journal of Materials Science, vol.6, issue.1, pp.26-30, 1986.
DOI : 10.1007/BF01144694

M. Assarar, Influence of water ageing on mechanical properties and damage events of two reinforced composite materials: Flax???fibres and glass???fibres, Materials & Design, vol.32, issue.2, pp.788-795, 2011.
DOI : 10.1016/j.matdes.2010.07.024

C. Chadefaux, Curve-fitting Micro-ATR-FTIR studies of the amide I and II bands of type I collagen in archaeological bone materials. e-PRESERVATION Science, pp.129-137, 2009.
URL : https://hal.archives-ouvertes.fr/hal-01676897

B. J. Aragão and Y. Messaddeq, Peak separation by derivative spectroscopy applied to ftir analysis of hydrolized silica, Journal of the Brazilian Chemical Society, vol.19, issue.8, pp.1582-1594, 2008.
DOI : 10.1590/S0103-50532008000800019

E. Ayres, R. L. Oréfice, and M. I. Yoshida, Phase morphology of hydrolysable polyurethanes derived from aqueous dispersions, European Polymer Journal, vol.43, issue.8, pp.43-3510, 2007.
DOI : 10.1016/j.eurpolymj.2007.05.014