M. Hillert, Discussion of A Commentary of Nucleation and Growth, Metall. Mater. Trans. A, vol.42, issue.3241, 2011.

M. J. Donachie, Titanium: A Technical Guide, 2000.

F. Prima, Etude métallurgique d'un nouvel alliage de titane ?-métastable, Istitut National des Sciences Appliquées de Rennes, 2000.

W. G. Burgers, On the process of transition of the cubic-body-centered modification into the hexagonal-close-packed modification of zirconium, Physica, pp.561-586, 1934.

K. and L. Biavant-guerrier, Etude de l'amorçage de fissures de fatigue dans le Ti- 6Al-4V, 2010.

Y. Combres, B. Champin, and M. , Traitements thermiques des alliages de titane, 1995.

C. Chunxiang, H. Baomin, Z. Lichen, and L. Shuangjin, Titanium alloy production technology , market prospects and industry development, Mater. Des, vol.32, pp.1684-1691, 2011.

A. Handbook, Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, 1990.

A. Handbook, Alloy Phase Diagrams, 1992.

V. N. Moiseyev, Advances in Metallic Alloys : Titanium alloys: Russian aircraft and aerospace applications, 2006.

F. J. Gil, M. P. Ginebra, J. M. Manero, and J. A. , Formation of ??-Widmanst??tten structure: effects of grain size and cooling rate on the Widmanst??tten morphologies and on the mechanical properties in Ti6Al4V alloy, Journal of Alloys and Compounds, vol.329, issue.1-2, pp.142-152, 2001.
DOI : 10.1016/S0925-8388(01)01571-7

M. Hillert, On the theory of normal and abnormal grain growth, Acta Metallurgica, vol.13, issue.3, pp.227-238, 1965.
DOI : 10.1016/0001-6160(65)90200-2

M. H. Beck, J. Kremer, and L. Demer, Grain growth in high-purity aluminum and in an aluminum-magnesium alloy, Trans. Am. Inst. Min. Met. Eng, pp.175-372, 1948.

P. A. Beck, Effect of Recrystallized Grain Size on Grain Growth, Journal of Applied Physics, vol.73, issue.5, p.19
DOI : 10.1103/PhysRev.73.526

M. Bouabdallah, Migration des joints de grain

T. Ahmed and H. J. Rack, Phase transformations during cooling in ??+?? titanium alloys, Materials Science and Engineering: A, vol.243, issue.1-2, pp.206-21110, 1998.
DOI : 10.1016/S0921-5093(97)00802-2

S. Banerjee and P. Mukhopadhyay, Phase Transformations Exemples from Titanium and Zirconium Alloys, 2007.

S. L. Semiatin, S. L. Knisley, P. N. Fagin, F. Zhang, and D. R. Barker, Microstructure Evolution during Alpha-Beta Heat Treatment of Ti-6Al-4V, Metall, Mater. Trans. A, pp.34-2377, 2003.

R. D?browski, The Kinetics of Phase Transformations During Continuous Cooling of the Ti6Al4V Alloy from the Single-Phase ?? Range, Archives of Metallurgy and Materials, vol.2, issue.4, pp.703-707, 2011.
DOI : 10.1007/978-3-642-56486-4_26

S. Malinov, P. Markovsky, W. Sha, and Z. Guo, Resistivity study and computer modelling of the isothermal transformation kinetics of Ti?, J. Alloys Compd, issue.01, pp.6-10, 2002.

S. Malinov, W. Sha, and Z. Guo, Application of artificial neural network for prediction of time???temperature???transformation diagrams in titanium alloys, Materials Science and Engineering: A, vol.283, issue.1-2, pp.283-284, 2000.
DOI : 10.1016/S0921-5093(00)00746-2

D. P. Koistinen and R. E. Marburger, A general equation prescribing the extent of the austenite-martensite transformation in pure iron-carbon alloys and plain carbon steels, Acta Metallurgica, vol.7, issue.1, pp.59-60, 1959.
DOI : 10.1016/0001-6160(59)90170-1

C. Charles and N. Jarvstrat, Modelling Ti-6Al-4V microstructure by evolution laws implemented as finite element subroutines: Application to TIG metal deposition, Proc. 8th Int, pp.477-485, 2009.

Y. Fan, P. Cheng, Y. L. Yao, Z. Yang, and K. Egland, Effect of phase transformations on laser forming of Ti???6Al???4V alloy, Journal of Applied Physics, vol.26, issue.1, pp.1-10, 2005.
DOI : 10.1016/S1044-5803(02)00286-3

Y. Ohmori, K. Nakai, H. Ohtsubo, and T. Masahiro, Formation of Widmanstätten Alpha Structure in a Ti-6Al-4V Alloy, Mater. Trans, pp.35-238, 1994.

E. S. Kumar-menon and H. I. , Aaronson, Nucleation , Growth , and Overall Transformation Kinetics of Grain Boundary Allotriomorphs of Proeutectoid Alpha in Ti-3.2 At, Metall. Trans, pp.17-1703, 1986.

J. Da and C. Teixeira, Etude expérimentale et modélisation des évolutions microstructurales au cours des traitements thermiques post forgeage dans l'alliage de titane Ti17, 2005.

G. M. Aaronson, H. I. Triplett, and W. B. , Phase transformations in hypoeutectoid Ti-Cr alloys, JOM, vol.4, issue.10, pp.1227-1235, 1957.
DOI : 10.1016/0502-8205(53)90020-3

H. Fujii, Continous Cooling Transformation Characteristics of ? + ? Titanium Alloys, Nippon Steel Tech. Rep, pp.74-79, 1994.

H. I. Aaronson, G. Spanos, R. A. Masamura, R. G. Vardiman, D. W. Moon et al., Sympathetic nucleation: an overview, Materials Science and Engineering: B, vol.32, issue.3, pp.107-123, 1995.
DOI : 10.1016/0921-5107(95)80022-0

I. Aaronson and C. Wells, Sympathetic Nucleation of Ferrite, JOM, vol.93, issue.10, pp.1216-1223, 1956.
DOI : 10.1016/S0031-8914(42)80080-4

S. Malinov, Z. Guo, W. Sha, and A. Wilson, Differential scanning calorimetry study and computer modeling of ?? ??? ?? phase transformation in a Ti-6Al-4V alloy, Metallurgical and Materials Transactions A, vol.25, issue.12, pp.879-887, 2001.
DOI : 10.1007/s11661-001-0345-x

I. Katzarov, S. Malinov, and W. Sha, Finite element modeling of the morphology of ?? to ?? phase transformation in Ti-6Al-4V alloy, Metallurgical and Materials Transactions A, vol.283, issue.3, pp.1027-1040, 2002.
DOI : 10.2355/isijinternational.32.291

H. R. Shercli and O. Grong, Microstructural modelling in metals processing, Prog. Mater. Sci, vol.47, pp.163-282, 2002.

W. P. Bosze and R. Trivedi, On the kinetic expression for the growth of precipitate plates, Metallurgical Transactions, vol.218, issue.2, pp.511-512, 1974.
DOI : 10.1007/BF02644122

G. Mi, Y. Wei, X. Zhan, C. Gu, and F. Yu, A coupled thermal and metallurgical model for welding simulation of Ti???6Al???4V alloy, Journal of Materials Processing Technology, vol.214, issue.11, pp.2434-2443, 2014.
DOI : 10.1016/j.jmatprotec.2014.05.011

J. W. Christian, The Theory of Transformations in Metals and Alloys, 2002.

F. Liu, F. Sommer, C. Bos, and E. J. Mittemeijer, Analysis of solid state phase transformation kinetics: models and recipes, International Materials Reviews, vol.3, issue.4, pp.193-212, 2007.
DOI : 10.1007/BF01914373

F. Liu, F. Sommer, and E. J. Mittemeijer, Parameter determination of an analytical model for phase transformation kinetics: Application to crystallization of amorphous Mg???Ni alloys, Journal of Materials Research, vol.93, issue.09, pp.2586-2596, 2004.
DOI : 10.1016/0001-6160(87)90128-3

F. R. Nabarro, The Strains Produced by Precipitation in Alloys, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol.175, issue.963, pp.519-538, 1940.
DOI : 10.1098/rspa.1940.0072

S. Yamasaki, Modelling Precipitation of Carbides in Martensitic Steels, 2004.

A. N. Kolmogorov, On The Statistical Theory Of Metal Crystallization, Izv. Akad, Nauk SSSR Ser. Mat, vol.3, pp.355-360, 1937.

W. A. Johnson and R. F. , Reaction Kinetics in Processes of Nucleation and Growth, Trans. Am. Inst. Minning Metall. Eng, vol.135, pp.416-458, 1939.

M. Avrami, Kinetics of Phase Change. I General Theory, The Journal of Chemical Physics, vol.22, issue.12, 1939.
DOI : 10.1002/zaac.19332140411

M. Avrami, Kinetics of Phase Change. II Transformation???Time Relations for Random Distribution of Nuclei, The Journal of Chemical Physics, vol.90, issue.2, pp.212-224, 1940.
DOI : 10.1007/BF01341256

R. Badji, M. Bouabdallah, B. Bacroix, C. Kahloun, K. Bettahar et al., Effect of solution treatment temperature on the precipitation kinetic of ??-phase in 2205 duplex stainless steel welds, Materials Science and Engineering: A, vol.496, issue.1-2, pp.447-454, 2008.
DOI : 10.1016/j.msea.2008.06.024

R. Badji, N. Kherrouba, B. Mehdi, B. Cheniti, M. Bouabdallah et al., Precipitation kinetics and mechanical behavior in a solution treated and aged dual phase stainless steel, Materials Chemistry and Physics, vol.148, issue.3, pp.664-672, 2014.
DOI : 10.1016/j.matchemphys.2014.08.032

S. Malinov, P. Markovsky, and W. Sha, Resistivity study and computer modelling of the isothermal transformation kinetics of Ti?, J. Alloys Compd, vol.333, issue.01, pp.8-9, 2002.

A. R. Massih and L. O. Jernkvist, Transformation kinetics of alloys under nonisothermal conditions, Model, Simul. Mater. Sci. Eng, vol.17, pp.1-16, 2009.

A. T. Kempen, F. Sommer, and E. J. Mittemeijer, Determination and interpretation of isothermal and non-isothermal transformation kinetics; The effective activation energies in terms of nucleation and growth, Journal of Materials Science, vol.37, issue.7, pp.1321-1332, 2002.
DOI : 10.1023/A:1014556109351

F. Liu, F. Sommer, and E. J. Mittemeijer, An analytical model for isothermal and isochronal transformation kinetics, Journal of Materials Science, vol.39, issue.5, 2004.
DOI : 10.1023/B:JMSC.0000016161.79365.69

J. W. Cahn, Transformation kinetics during continuous cooling, Acta Metallurgica, vol.4, issue.6, pp.572-575, 1956.
DOI : 10.1016/0001-6160(56)90158-4

D. Martin, Application of Kolmogorov???Johnson???Mehl???Avrami equations to non-isothermal conditions, Computational Materials Science, vol.47, issue.3, pp.796-800, 2010.
DOI : 10.1016/j.commatsci.2009.11.005

J. W. Elmer, T. A. Palmer, W. Zhang, B. Wood, and T. Debroy, Kinetic modeling of phase transformations occurring in the HAZ of C-Mn steel welds based on direct observations, Acta Materialia, vol.51, issue.12, pp.3333-3349, 2003.
DOI : 10.1016/S1359-6454(03)00049-1

S. Malinov, Z. Guo, W. Sha, and A. Wilson, Differential Scanning Calorimetry Study and Computer Modeling of b Þ a Phase Transformation in a Ti-6Al-4V Alloy, Metall. Mater. Trans. A, pp.32-879, 2001.

A. Suárez, M. J. Tobar, A. Yáñez, I. Pérez, J. Sampedro et al., Modeling of phase transformations of Ti6Al4V during laser metal deposition, Physics Procedia, vol.12, pp.666-673, 2011.
DOI : 10.1016/j.phpro.2011.03.083

N. Kherrouba, M. Bouabdallah, R. Badji, and D. Carron, Beta to alpha transformation kinetics and microstructure of Ti-6Al-4V alloy during continuous cooling, Materials Chemistry and Physics, vol.181, 2016.
DOI : 10.1016/j.matchemphys.2016.06.082

S. Tamirisakandala, Effect of boron on the beta transus of Ti???6Al???4V alloy, Scripta Materialia, vol.53, issue.2, pp.217-222, 2005.
DOI : 10.1016/j.scriptamat.2005.03.038

N. Chobaut, D. Carron, and J. M. Drezet, Monitoring Precipitation Kinetics in Heat Treatable Aluminium Alloys Using <i>In Situ</i> Resistivity in Gleeble Thermomechanical Simulator, Materials Science Forum, vol.794, issue.796, pp.921-925, 2014.
DOI : 10.4028/www.scientific.net/MSF.794-796.921

J. Svoboda, F. D. Fischer, P. Fratzl, and E. Kozeschnik, Modelling of kinetics in multicomponent multi-phase systems with spherical precipitates I: Theory

S. Mauriès, Caractérisation et modélisation de la séquence de précipitation de carbures au cours du traitement thermique d'aciers martensitiques alliés, 2008.

J. Sieniawski, W. Ziaja, K. Kubiak, and M. Motyka, Titanium Alloys -Advances in Properties Control
DOI : 10.5772/49999

M. Lusk and H. Jou, On the rule of additivity in phase transformation kinetics, Metallurgical and Materials Transactions A, vol.16, issue.2, pp.28-287, 1997.
DOI : 10.1007/BF02647190

S. Bein and J. Béchet, Phase Transformation Kinetics and Mechanisms in Titanium Alloys Ti-6.2.4.6,??-CEZ and Ti-10.2.3, Le Journal de Physique IV, vol.06, issue.C1, pp.99-108, 1996.
DOI : 10.1051/jp4:1996110
URL : https://hal.archives-ouvertes.fr/jpa-00254142

H. I. Aaronson, W. B. Triplett, and G. M. Andes, Phase transformations in hypoeutectoid Ti-Cr alloys, JOM, vol.4, issue.10, pp.1227-12353, 1957.
DOI : 10.1016/0502-8205(53)90020-3

R. Shi and Y. Wang, Variant selection during alpha precipitation in Ti-6Al-4V under the influence of local stress -A simulation study, Acta Mater, vol.61, 2013.

M. Enomoto and M. Fujita, Analysis of the composition of ?? plates isothermally formed in titanium binary alloys, Metallurgical Transactions A, vol.45, issue.6, pp.1547-1556, 1990.
DOI : 10.1098/rspa.1981.0156

S. L. Semiatin, T. M. Brown, T. A. Goff, P. N. Fagin, R. E. Turner et al., Diffusion coefficients for modeling the heat treatment of Ti-6Al-4V, Metallurgical and Materials Transactions A, vol.25, issue.9, pp.3015-3018, 2004.
DOI : 10.1007/978-1-4899-3051-4

A. K. Shah, G. J. Kulkarni, V. Gopinathan, and R. Krishnan, Determination of activation energy for ?? + ?? ??? ?? transformation in Ti-6Al-4V alloy by dilatometry, Scripta Metallurgica et Materialia, vol.32, issue.9, pp.1353-1356, 1995.
DOI : 10.1016/0956-716X(95)00170-Z

H. E. Kissinger, Reaction Kinetics in Differential Thermal Analysis, Analytical Chemistry, vol.29, issue.11, pp.1702-1706, 1957.
DOI : 10.1021/ac60131a045

S. L. Semiatin, S. L. Knisley, P. N. Fagin, D. R. Barker, and F. Zhang, Microstructure evolution during alpha-beta heat treatment of Ti-6Al-4V, Metallurgical and Materials Transactions A, vol.49, issue.10, pp.2377-2386, 2003.
DOI : 10.1007/978-1-4899-3051-4

M. Perez, M. Dumont, and D. Acevedo-reyes, Implementation of classical nucleation and growth theories for precipitation, Acta Materialia, vol.56, issue.9, pp.2119-2132, 2008.
DOI : 10.1016/j.actamat.2007.12.050
URL : https://hal.archives-ouvertes.fr/hal-01540121

C. Zener, Theory of Growth of Spherical Precipitates from Solid Solution, Journal of Applied Physics, vol.20, issue.10, pp.950-953, 1949.
DOI : 10.1063/1.1698257

E. S. Kumar-menon and H. I. , Aaronson, Morphology, Crystallography and Kinetics of Sympathetic Nucleation, Acta Met, vol.3587, pp.549-56310, 1987.

R. Becker and W. Döring, Kinetische Behandlung der Keimbildung in ??bers??ttigten D??mpfen, Annalen der Physik, vol.163, issue.8, pp.719-752, 1935.
DOI : 10.1002/andp.19354160806

J. B. Zeldovich, On the theory of new phase formation: cavitation, Acta Physicochim, URSS, vol.18, pp.1-22, 1943.

M. Hillert, L. Höglund, and J. Ågren, Diffusion-controlled lengthening of Widmanst??tten plates, Acta Materialia, vol.51, issue.7, pp.2089-2095, 2003.
DOI : 10.1016/S1359-6454(03)00008-9

B. Appolaire, L. Héricher, and E. Aeby-gautier, Modelling of phase transformation kinetics in Ti alloys ??? Isothermal treatments, Acta Materialia, vol.53, issue.10, 2005.
DOI : 10.1016/j.actamat.2005.03.014
URL : https://hal.archives-ouvertes.fr/hal-00163441