B. Ahn, J. Kim, L. Ian, K. Rha, K. et al., Mechanical Property Characterization of Prostate Cancer Using a Minimally Motorized Indenter in an Ex Vivo Indentation Experiment, Urology, vol.76, issue.4, pp.1007-1018, 2010.
DOI : 10.1016/j.urology.2010.02.025

B. K. Aktas, S. Bulut, C. S. Gokkaya, C. Ozden, R. Salar et al., Association of Prostate Volume With Voiding Impairment and Deterioration in Quality of Life After Prostate Biopsy, Urology, vol.83, issue.3, pp.83617-83638, 2014.
DOI : 10.1016/j.urology.2013.11.002

M. Aljerf, Propriété Mécaniques des Verres Métalliques, Mise en Forme et Applications, 2011.

G. Antherieu, N. Connesson, D. Favier, P. Mozer, and Y. Payan, Principle and Experimental Validation of a new Apparatus Allowing Large Deformation in Pure Bending: Application to thin Wire, Experimental Mechanics, vol.26, issue.7, 2015.
DOI : 10.1016/j.ijfatigue.2003.10.019
URL : https://hal.archives-ouvertes.fr/hal-01404026

G. Arnold, S. Calloch, D. Dureisseix, and R. Billardon, A pure bending machine to identify the mechanical behaviour of thin sheets, 6th International ESAFORM Conference on Material Forming, pp.1-4, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00321284

S. Baba and Y. Ono, Interventional Management of Urological Diseases, of Recent Advances in Endourology, 2006.
DOI : 10.1007/978-4-431-35642-4

N. Bechle and S. Kyriakides, Localization in NiTi tubes under bending, International Journal of Solids and Structures, vol.51, issue.5, pp.967-980, 2014.
DOI : 10.1016/j.ijsolstr.2013.11.023

Z. Braf, J. Chen, M. Sofer, and H. Matzkin, Intraprostatic Metal Stents (Prostakath?? and Urospiral??): More than 6 Years' Clinical Experience with 110 Patients, Journal of Endourology, vol.10, issue.6, pp.555-558, 1996.
DOI : 10.1089/end.1996.10.555

F. Braz, K. Mahesh, D. Santos, and A. , Thermomechanical Treatments for Ni-Ti Alloys, Shape Memory Alloys -Processing, Characterization and Applications, 2013.
DOI : 10.5772/56087

L. Brinson, Stress-induced transformation behavior of a polycrystalline NiTi shape memory alloy: micro and macromechanical investigations via in situ optical microscopy, Journal of the Mechanics and Physics of Solids, vol.52, issue.7, pp.1549-1571, 2004.
DOI : 10.1016/j.jmps.2004.01.001

W. J. Buehler, J. V. Gilfrich, W. , and R. C. , Effect of Low???Temperature Phase Changes on the Mechanical Properties of Alloys near Composition TiNi, Journal of Applied Physics, vol.221, issue.5, p.1475, 1963.
DOI : 10.1063/1.1729603

N. Connesson, G. Antherieu, D. Favier, and Y. Payan, Dispositif de test mécanique en flexion pure et procédé de mise en oeuvre, 2014.

E. Corona and S. Kyriakides, On the collapse of inelastic tubes under combined bending and pressure, International Journal of Solids and Structures, vol.24, issue.5, pp.505-535, 1988.
DOI : 10.1016/0020-7683(88)90005-4

C. Coulange, Cystoscopie Progrès en urologie : journal de l'Association française d'urologie et de la Société française d'urologie, pp.822-828, 2010.

A. T. Crockett, Y. Aso, D. , and L. , Recommendations of the International Consensus Comittee concerning : 4.Treatment recommendations for benign prostatic hyperplasia (BPH), 3rd International Consultation on Benign Prostatic Hyperplasia, 1995.

J. Crouzet, X. Bertrand, . G. Venier, M. Badoz, C. Husson et al., Control of the duration of urinary catheterization: impact on catheter-associated urinary tract infection, Journal of Hospital Infection, vol.67, issue.3, pp.253-260, 2007.
DOI : 10.1016/j.jhin.2007.08.014
URL : https://hal.archives-ouvertes.fr/hal-00341673

V. Delobelle, G. Chagnon, D. Favier, A. , and T. , Study of electropulse heat treatment of cold worked NiTi wire: From uniform to localised tensile behaviour, Journal of Materials Processing Technology, vol.227, pp.244-250, 2016.
DOI : 10.1016/j.jmatprotec.2015.08.011
URL : https://hal.archives-ouvertes.fr/hal-01480523

R. Delville, B. Malard, J. Pilch, P. Sittner, and D. Schryvers, Microstructure changes during non-conventional heat treatment of thin Ni???Ti wires by pulsed electric current studied by transmission electron microscopy, Acta Materialia, vol.58, issue.13, pp.584503-4515, 2010.
DOI : 10.1016/j.actamat.2010.04.046

R. Drake, W. Vogl, A. Mitchell, and A. , Gray's anatomy for students, 2010.

M. Drexel, G. Selvaduray, and A. Pelton, The Effects of Cold Work and Heat Treatment on the Properties of Nitinol Wire, ASME 2007 2nd Frontiers in Biomedical Devices, pp.447-454, 2006.
DOI : 10.1115/BioMed2007-38012

J. Dryden, Bending of inhomogeneous curved bars, International Journal of Solids and Structures, vol.44, issue.11-12, pp.11-124158, 2007.
DOI : 10.1016/j.ijsolstr.2006.11.021

X. Ducros, Thermodynamique 1e année MPSI-PCSI-PTSI : Fiches, méthodes et exercices corrigés. Ellipses, taupe, 2005.

K. Fabian, The intra-prostatic "partial catheter" (urological spiral), Urologe A, vol.19, issue.4, pp.236-238, 1980.

D. Favier, H. Louche, P. Schlosser, L. Orgéas, P. Vacher et al., Homogeneous and heterogeneous deformation mechanisms in an austenitic polycrystalline Ti???50.8at.% Ni thin tube under tension. Investigation via temperature and strain fields measurements, Acta Materialia, vol.55, issue.16, pp.555310-5322, 2007.
DOI : 10.1016/j.actamat.2007.05.027
URL : https://hal.archives-ouvertes.fr/hal-00336739

R. Fish, L. Geddes, and C. Babbs, Medical and Bioengineering Aspects of Electrical Injuries, 2003.

R. Fourcade, M. Picot, A. Gaudin, N. Texier, and A. Slama, Facteurs déterminant le choix thérapeutique des urologues pour la prise en charge des patients ayant une hypertrophie bénigne de la prostate, pp.755-763, 2007.

B. Foxman, Epidemiology of urinary tract infections : incidence, morbidity, and economic costs. Disease-a-month : DM, pp.53-70, 2003.

C. Des-urologues, Urologie, 2015.

G. Ghazijahani, T. Showkati, and H. , Experiments on cylindrical shells under pure bending and external pressure, Journal of Constructional Steel Research, vol.88, pp.109-122, 2013.
DOI : 10.1016/j.jcsr.2013.04.009

R. Harkaway, What are the Views of Patients and Urologists on Benign Prostatic Hyperplasia and Its Management?, European Urology Supplements, vol.6, issue.6, pp.454-459, 2007.
DOI : 10.1016/j.eursup.2007.01.015

N. W. Harrison, D. Souza, and J. V. , Prostatic Stenting for Outflow Obstruction, British Journal of Urology, vol.63, issue.2, pp.192-196, 1990.
DOI : 10.1111/j.1464-410X.1990.tb14698.x

T. Hoc, C. Rey, P. , and E. C. , Effect of the free surface on strain localization in mild steel, Scripta Materialia, vol.42, issue.11, pp.1053-1058, 2000.
DOI : 10.1016/S1359-6462(00)00337-7

J. Hoefnagels, C. Buizer, and M. Geers, A miniaturized contactless pure-bending device for in-situ SEM failure analysis, Experimental and Applied Mechanics, vol.6, pp.587-596, 2011.
DOI : 10.1007/978-1-4614-0222-0_70

R. Kirby, J. Mcconnell, . Fitzpatrick, . John, C. Roehrborn et al., Textbook of Benign Prostatic Hyperplasia, 2004.

S. Kyriakides and G. Ju, Bifurcation and localization instabilities in cylindrical shells under bending???I. Experiments, International Journal of Solids and Structures, vol.29, issue.9, pp.1117-1142, 1992.
DOI : 10.1016/0020-7683(92)90139-K

G. Lee, S. Marathe, S. Sabbagh, and J. Crisp, Thermo-expandable Intra-prostatic Stent in the Treatment of Acute Urinary Retention in Elderly Patients with Significant Co-morbidities, International Urology and Nephrology, vol.1, issue.3, pp.501-505, 2005.
DOI : 10.1111/j.1464-410X.1993.tb00728.x

S. Lekhnitskii, On the bending of a plane inhomogeneous curved beam, Journal of Applied Mathematics and Mechanics, vol.43, issue.1, pp.182-183, 1979.

M. Li and S. Zinkle, Physical and Mechanical Properties of Copper and Copper Alloys, Comprehensive Nuclear Materials, pp.667-690, 2012.
DOI : 10.1016/B978-0-08-056033-5.00122-1

H. Lin, S. Wu, T. Chou, and H. Kao, The effects of cold rolling on the martensitic transformation of an equiatomic TiNi alloy, Acta Metallurgica et Materialia, vol.39, issue.9, pp.2069-2080, 1991.
DOI : 10.1016/0956-7151(91)90177-3

Y. Liu, Y. Liu, and J. Humbeeck, Lüders-like deformation associated with martensite reorientation in NiTi, Scripta Materialia, issue.8, pp.391047-1055, 1998.

Y. Liu, J. Van-humbeeck, R. Stalmans, and L. Delaey, Some aspects of the properties of NiTi shape memory alloy, Journal of Alloys and Compounds, vol.247, issue.1-2, pp.115-121, 1997.
DOI : 10.1016/S0925-8388(96)02572-8

D. Mcclaflin, Torsional deformation and fatigue of hardened steel including mean stress and stress gradient effects, International Journal of Fatigue, vol.26, issue.7, pp.773-784, 2004.
DOI : 10.1016/j.ijfatigue.2003.10.019

T. Mcnicholas and S. Mitchell, Benign prostatic hyperplasia. The Lancet, pp.1359-1367, 2003.

T. Mcnicholas and D. Swallow, Benign prostatic hyperplasia, Surgery (Oxford), vol.29, issue.6, pp.282-286, 2011.
DOI : 10.1016/j.mpsur.2011.03.005

Q. Meng, Y. Liu, H. Yang, B. S. Shariat, N. et al., Functionally graded NiTi strips prepared by laser surface anneal, Acta Materialia, vol.60, issue.4, pp.1658-1668, 2012.
DOI : 10.1016/j.actamat.2011.11.052

Q. Meng, H. Yang, Y. Liu, N. , and T. , Compositionally graded NiTi plate prepared by diffusion annealing, Scripta Materialia, vol.67, issue.3, pp.305-308, 2012.
DOI : 10.1016/j.scriptamat.2012.05.014

A. Moritz and F. Henriques, Study of thermal injury. II. The relative importance of time and surface temperature in the causation of cutaneus burns, American journal of Pathology, vol.23, issue.5, pp.695-720, 1947.

F. Murnaghan, Finite Deformations of an Elastic Solid, American Journal of Mathematics, vol.59, issue.2, 1951.
DOI : 10.2307/2371405

L. E. Nicolle and H. S. Centre, Epidemiology of urinary tract infections, Clinical Microbiology Newsletter, vol.24, issue.18, pp.135-140, 2002.
DOI : 10.1016/S0196-4399(02)80035-6

J. Nordling, H. Ovesen, and A. L. Poulsen, The Intraprostatic Spiral: Clinical Results In 150 Consecutive Patients, The Journal of Urology, vol.147, issue.3, 1992.
DOI : 10.1016/S0022-5347(17)37333-0

K. Nurveren, A. Akdogan, and W. Huang, Evolution of transformation characteristics with heating/cooling rate in NiTi shape memory alloys, Journal of Materials Processing Technology, vol.196, issue.1-3, pp.1-3129, 2008.
DOI : 10.1016/j.jmatprotec.2007.05.015

J. Olbricht, . Yawny, J. Pelegrina, G. Eggeler, Y. et al., Characteristics of the stress-induced formation of R-phase in ultrafine-grained NiTi shape memory wire, Journal of Alloys and Compounds, vol.579, pp.249-252, 2013.
DOI : 10.1016/j.jallcom.2013.06.056

L. Orgeas and D. Favier, Application of the Beam Theory to Model the Pseudoelastic and Ferroelastic Bending of SMA Beams, Le Journal de Physique IV, vol.05, issue.C2, pp.2-7, 1995.
DOI : 10.1051/jp4:1995280
URL : https://hal.archives-ouvertes.fr/jpa-00253666

L. Orgéas and D. Favier, Stress-induced martensitic transformation of a NiTi alloy in isothermal shear, tension and compression, Acta Materialia, vol.46, issue.15, pp.465579-5591, 1998.
DOI : 10.1016/S1359-6454(98)00167-0

K. Otsuka and X. Ren, Physical metallurgy of Ti???Ni-based shape memory alloys, Progress in Materials Science, pp.511-678, 2005.
DOI : 10.1016/j.pmatsci.2004.10.001

C. Parker, B. Birch, A. Connelly, T. Briggs, K. Anson et al., The Porges Urospiral: a reversible endoprostatic prosthetic stent, World Journal of Urology, vol.9, issue.1, pp.22-25, 1991.
DOI : 10.1007/BF00184708

M. Perry, A. Roodhouse, A. Gidlow, T. Spicer, E. et al., Thermo-expandable intraprostatic stents in bladder outlet obstruction: an 8-year study, BJU International, vol.81, issue.3, pp.90216-223, 2002.
DOI : 10.1046/j.1464-410x.1998.00632.x

R. Plowman, N. Graves, J. Esquivel, and J. Roberts, An economic model to assess the cost and benefits of the routine use of silver alloycoated urinary catheters to reduce the risk of urinary tract infections in catheterized patients, Journal of Hospital Infection, vol.48, issue.1, pp.33-42, 2001.
DOI : 10.1053/jhin.2001.0938

A. L. Poulsen, J. Schou, H. Ovesen, and J. Nordling, : A Second Generation of Intraprostatic Spirals, British Journal of Urology, vol.142, issue.3, pp.331-334, 1993.
DOI : 10.1056/NEJM198904273201705

B. Reedlunn, C. Churchill, E. Nelson, J. Shaw, and S. Daly, Tension, compression, and bending of superelastic shape memory alloy tubes, Journal of the Mechanics and Physics of Solids, vol.63, pp.506-537, 2014.
DOI : 10.1016/j.jmps.2012.12.012

X. Ren, N. Miura, J. Zhang, K. Otsuka, K. Tanaka et al., A comparative study of elastic constants of Ti???Ni-based alloys prior to martensitic transformation, Materials Science and Engineering: A, vol.312, issue.1-2, pp.196-206, 2001.
DOI : 10.1016/S0921-5093(00)01876-1

T. Rey, L. Cam, J. Chagnon, G. Favier, D. Rebouah et al., An original architectured NiTi silicone rubber structure for biomedical applications, Materials Science and Engineering: C, vol.45, pp.184-190, 2014.
DOI : 10.1016/j.msec.2014.08.062
URL : https://hal.archives-ouvertes.fr/hal-01083236

T. Rey, F. Razan, E. Robin, S. Faure, L. Cam et al., Mechanical characterization and comparison of different NiTi/silicone rubber interfaces, International Journal of Adhesion and Adhesives, vol.48, pp.67-74, 2014.
DOI : 10.1016/j.ijadhadh.2013.09.028
URL : https://hal.archives-ouvertes.fr/hal-00963798

M. Rosenberg, Pharmacoeconomics of treating uncomplicated urinary tract infections, International Journal of Antimicrobial Agents, vol.11, issue.3-4, pp.247-51, 1999.
DOI : 10.1016/S0924-8579(99)00024-2

V. D. Rosenthal, A. Dwivedy, M. E. Calderón, S. Esen, H. T. Hernández et al., Time-dependent analysis of length of stay and mortality due to urinary tract infections in ten developing countries: INICC findings, Journal of Infection, vol.62, issue.2, pp.136-177, 2011.
DOI : 10.1016/j.jinf.2010.12.004

R. Sandström, J. Hallgren, and G. Burman, Stress strain flow curves for Cu-OFP, pp.9-14, 2009.

P. Sedmák, P. ?ittner, J. Pilch, C. , and C. , Instability of cyclic superelastic deformation of NiTi investigated by synchrotron X-ray diffraction, Acta Materialia, vol.94, pp.257-270, 2015.
DOI : 10.1016/j.actamat.2015.04.039

J. Shaw and S. Kyriakides, On the nucleation and propagation of phase transformation fronts in a NiTi alloy, Acta Materialia, vol.45, issue.2, pp.683-700, 1997.
DOI : 10.1016/S1359-6454(96)00189-9

J. Shaw, Simulations of localized thermo-mechanical behavior in a NiTi shape memory alloy, International Journal of Plasticity, vol.16, issue.5, pp.541-562, 2000.
DOI : 10.1016/S0749-6419(99)00075-3

J. Siderias, F. Gaudio, and A. Singer, Comparison of topical anesthesics and lubricants prior to urethral catheterization in males : a randomized controlled trial, Academic emergency medicine, vol.6, issue.11, 2014.

P. Sittner, Y. Liu, and V. Novak, On the origin of Lüders-like deformation of NiTi shape memory alloys, Journal of the Mechanics and Physics of Solids, issue.8, pp.531719-1746, 2005.

H. Soul, A. Yawny, X. Wang, V. Humbeeck, and J. , Superelastic Behavior of NiTi: Effects of the Stress Level Applied During the Heat Treatment of Cold Worked Wires, Materials Today : Proceedings, pp.987-990, 2015.
DOI : 10.1016/j.matpr.2015.07.447

G. Tan, Y. Liu, P. Sittner, and M. Saunders, L??ders-like deformation associated with stress-induced martensitic transformation in NiTi, Scripta Materialia, vol.50, issue.2, pp.193-198, 2004.
DOI : 10.1016/j.scriptamat.2003.09.018

P. Tenon, Hypertrophie bénigne de la prostate, 2009.

P. J. Thomas, J. P. Britton, H. , and N. W. , The Prostakath Stent: Four Years' Experience, British Journal of Urology, vol.64, issue.4, pp.430-432, 1993.
DOI : 10.1111/j.1464-410X.1993.tb15987.x

S. Timoshenko and J. Goodier, Theory of Elasticity, 1951.

P. Tracqui, A. Broisat, J. Toczek, N. Mesnier, J. Ohayon et al., Mapping elasticity moduli of atherosclerotic plaque in situ via atomic force microscopy, Journal of Structural Biology, vol.174, issue.1, pp.115-138, 2011.
DOI : 10.1016/j.jsb.2011.01.010
URL : https://hal.archives-ouvertes.fr/hal-00846370

M. Voute, J. Hendriks, J. Van-laanen, P. Pattynama, B. Muhs et al., Radial Force Measurements in Carotid Stents: Influence of Stent Design and Length of the Lesion, Journal of Vascular and Interventional Radiology, vol.22, issue.5, pp.661-666, 2011.
DOI : 10.1016/j.jvir.2011.01.450

B. Wack, The torsion of a tube (or a rod): General cylindrical kinematics and some axial deformation and ratchet measurements, Acta Mechanica, vol.26, issue.1/2, pp.39-59, 1989.
DOI : 10.1007/BF01178179

P. Willette, K. Banks, and L. Shaffer, Visually guided male urinary catheterization : a feasibility study Journal of emergency nursing : JEN : official publication of the Emergency Department Nurses Association, pp.27-32, 2013.

D. Yachia, Stenting the urinary system, Isis Medical Media, 1998.

D. Yachia and I. Aridogan, Comparison between First-Generation (Fixed-Caliber) and Second-Generation (Self-Expanding, Large Caliber) Temporary Prostatic Stents, Urologia Internationalis, vol.57, issue.3, 1996.
DOI : 10.1159/000282903