]. Stiker, Assistive products for persons with disability -Classification and terminology [4] Organisation Mondiale de la Santé Rapport mondial sur le handicap [5] Organisation Mondiale de la Santé The Global Burden of Disease: 2004 update Méthodologie de conception de produits adaptée aux marchés de niche : application au marché du handicap moteur Notion de situation de handicap (moteur) Modèle individuel, modèle médical, modèle social : la question du sujet, Déficiences motrices et Situations de Handicaps Bruxelles: ISO, 2011. [3] Organisation Mondiale de la Santé, La Classification Internationale du Fonctionnement, du handicap et de la santé (CIF) Le handicap comme nouvel enjeu de santé publique, pp.38-47, 1999.

]. S. Nagi, R. J. Simeonsson, D. Lollar, J. Hollowell, and M. Adams, A Study in the Evaluation of Disability and Rehabilitation Potential, American Journal of Public Health and the Nations Health, vol.54, issue.9, pp.1568-1579, 1964.
DOI : 10.2105/AJPH.54.9.1568

R. O. Teles, M. Santos, Y. F. Heerkens, T. Bougie, M. W. De et al., Assistive Technology -Trainee Booklet Classification and terminology of assistive products Available: https, International Encyclopedia of Rehabilitation. GMDN Database GMDN Database, pp.1-10, 2010.

A. R. Højen, R. Kuropatwa, S. Ct-starter, and . Guide, Copenhagen: International Health Terminology Standards Development Organisation (IHTSDO), 2014. [18] République Française, -102 du 11 février 2005 pour l'égalité des droits et des chances, la participation et la citoyenneté des personnes handicapées, p.53, 2005.

T. J. Deloitte, L. Stack, C. Zarate, N. Pastor, H. K. Mathiassen et al., Access to Assistive Technology in the European Union Boca Analysing and federating the European assistive technology ICT industry Predictors of assistive technology abandonment, Bruxelles Assist. Technol, vol.5, issue.1, pp.36-45, 1993.

R. Reiss, . Wacker23-]-s, A. Leclercq, A. Sax, L. Vanbiervliet et al., Factors associated with assistive technology discontinuance among individuals with disabilities La préconisation des technologies d'assistance : de la solution palliative à l'action participative Predictors of assistive technology use: the importance of personal and psychosocial factors, Congrés Handicap, pp.44-50, 2000.

H. Day, J. Jutai, W. Woolrich, and G. Strong, The stability of impact of assistive devices, Disabil . Rehabil, vol.23, issue.9, pp.400-404, 2001.

]. J. Lagand, Design et Fauteuils Roulants : quelle influence sur l'acceptation du handicap ?, 2011.

G. Mukherjee and A. Samanta, Wheelchair charity: A useless benevolence in community-based rehabilitation, Disability and Rehabilitation, vol.27, issue.10, pp.591-596, 2005.
DOI : 10.1080/09638280400018387

H. H. Lee and E. Chang, Consumer Attitudes Toward Online Mass Customization: An Application of Extended Technology Acceptance Model, M. Lobato, and S, pp.171-200, 2011.
DOI : 10.1086/208520

R. Simon-harry, M. Barbera, S. Parker, O. Forsberg, M. Plos et al., Assistive technology industry: A field for cooperation and networking HEART Final Report on Service Delivery Universal Design : proposition d'une nouvelle approche appliquée à la conception d'une table adaptative On the impediments to innovation in the European AT industry On the determinants of Innovation in the European Rehabilitation (Assistive) Technology market Understanding motivations of entrepreneurs in the assistive technology market, Coherence between and among Rehabilitation Technology Industrial Sectors ? Overview Forschungsinstitut Technologie-Behindertenhilfe Congrès SELF Vernardakis, C. Stephanidis, and D. Akoumianakis Stephanidis, and D. Akoumianakis FORTH-ICS, pp.115-130, 1993.

J. Dubois, L. Lexis-le-dictionnaire-Érudit-de-la-langue-française.-paris37-]-v, K. Krishnan, ]. S. Ulrich38, K. Brown et al., Product Development Decisions: A Review of the Literature Product Development: past research, present findings and future directions Gestão do Desenvolvimento de Produtos: uma referencia para a melhoria do processo. São Paulo: Saraiva A Methodology for Production Development, IPEMM -Integrated Product Development Process Management Model, Based on Systems Engineering and Systematic Problem Solving International Conference on Engineering Design Product Innovation : Leading change through integrated Product Development, pp.1-21, 1995.

H. Rozenfeld, F. A. Forcellini, J. C. De-toledo, D. C. Amaral, E. P. Mosconi et al., Development of a reference model for integrating product development processrelated knowledge A design chain collaboration framework using reference models Models of designing, " in Design process improvement : a review of current practice Comparisons of design methodologies and process models across domains: a literature review, International Congress of Mechanical Engineering, pp.1-8, 2003.

S. Finger and J. R. Dixon, A review of research in mechanical engineering design. Part I: Descriptive, prescriptive, and computer-based models of design processes, Research in Engineering Design, vol.24, issue.1, pp.51-67, 1989.
DOI : 10.1115/1.3439399

]. B. Eisenbart, K. Gericke, and L. Blessing, A Framework for Comparing Design Modelling Approaches Across Disciplines An analysis of design process models across disciplines, International Conference on Engineering Design (ICED) Proc. 12th Int. Des. Conf. Des. 2012, pp.1-12, 2011.

S. Möhringer, A. Sharafi, T. Wolfenstetter, P. Wolf, H. J. Krcmar56-]-t et al., Comparing product development models to identify process coverage and current gaps: A literature review Describing the creative design process by the integration of engineering design and cognitive psychology literature Design determines 70% of cost? A review of implications for design evaluation Design for production: Concepts and applications, International Conference on Industrial Engineering and Engineering Management Proceedings of the SME East Coast Region 3, pp.415-420, 2001.

M. J. Doukas61-]-s and . Hu, The evolution of manufacturing systems: from crafsmanship to the era of customisation The Global Manufacturing Revolution: Product-Process-Business Integration and Reconfigurable Systems Evolving Paradigms of Manufacturing: From Mass Production to Mass Customization and Personalization, Handbook of Research on Design and Management of Lean Production Systems CIRP, pp.1-29, 2010.

J. P. Womack, D. T. Jones, and D. Roos, The Machine That Changed the World, 1990.

A. Nambiar, K. Radeka, and T. Sutton, Modern manufacturing paradigms ? A comparison What is 'lean' about product development?, Proceedings of the international multiconference of engineers and computer scientists, pp.11-15, 2007.

G. Ballard, Road Map for Lean Implementation at the Project Level Austin Lean ingénierie : Appliquer l'approche lean en conception et développement produit The Toyota Way: 14 Management Principles from the World's Greatest Manufacturer [70] S. Shingo, A study of the Toyota production system from an industrial point of view, Management & Finance, pp.75-77, 1989.

H. León and J. Farris, Lean Product Development Research: Current State and Future Directions, Engineering Management Journal, vol.36, issue.3, pp.29-52, 2011.
DOI : 10.1177/1063293X06072483

M. Gudem, M. Steinert, and T. Welo, FROM LEAN PRODUCT DEVELOPMENT TO LEAN INNOVATION: SEARCHING FOR A MORE VALID APPROACH FOR PROMOTING UTILITARIAN AND EMOTIONAL VALUE, International Journal of Innovation and Technology Management, vol.40, issue.02, pp.1-10, 2014.
DOI : 10.1007/BF02894350

J. Hoppmann, E. Rebentisch, U. Dombrowski, T. Zahn, T. Baines et al., A Framework for Organizing Lean Product Development State-of-the-art in lean design engineering: a literature review on white collar lean, Proc. Inst, pp.3-16, 2006.

C. Karlsson and P. Åhlström, The difficult path to lean product development [79] A. Ward, Lean Product and Process Development Value-based product development: refocusing lean On customer value and improvement in product development processes, Proc. IEEE, pp.283-295, 1996.

B. Haque and M. James-moore, Applying lean thinking to new product introduction, Journal of Engineering Design, vol.76, issue.1, 2004.
DOI : 10.1108/00438020010305392

M. Gudem, M. Steinert, T. Welo, L. Leifer, and D. A. Norman, Redefining customer value in lean product development design projects Design émotionnel : pourquoi aimons-nous (ou détestons-nous) les objets qui nous entourent ?, 1ère Towards user design? On the shift from object to user as the subject of design Design of a lean development framework, J. Eng. Des. Technol. Des. Stud. Ind. Eng. ?, vol.11, issue.27 2, pp.71-89, 2006.

]. L. Keeley, H. Walters, R. Pikkel, B. Quinn, and R. Verganti, Ten Types of Innovation: The Discipline of Building Breakthroughs Design, Meanings, and Radical Innovation: A Metamodel and a Research Agenda, J. Prod. Innov. Manag, vol.87, issue.25 5, pp.436-456, 2008.

S. Martelo-landroguez, C. Barroso-castro, and G. Cepeda, The cycle of customer value: a model integrating customer and firm perspectives, Journal of Business Economics and Management, vol.2003, issue.12, pp.467-481, 1998.
DOI : 10.1108/09604520410528590

]. J. Bernstein, Design Methods in the Aerospace Industry: Looking for Evidence of Set-Based Practices, 1998.

]. D. Ford, D. Sobek, and G. Ballard, Adapting Real Options to New Product Development by Modeling the Second Toyota Paradox, Proceedings of the 8th Annual Conference of the International Group for Lean Construction Thomson, " Determining the Value of Sequential and Concurrent NPD Processes, pp.175-185, 1996.
DOI : 10.1109/TEM.2005.844466

]. D. Sobek, A. Ward, and J. Liker, Toyota's principles of set-based concurrent engineering, Sloan Manage. Rev, vol.40, issue.2, p.17, 1999.

D. Sobek and A. Ward, Principles from toyota's set-based concurrent engineering process, Design Engineering Technical Conferences and Computers in Engineering Conference, pp.1-9, 1996.

A. Ward, J. Liker, J. Cristiano, and D. Sobek, The second Toyota paradox: how delaying decisions can make better cars faster, pp.43-61, 1995.

F. Ballé and M. Ballé, Lean Development, Business Strategy Review, vol.16, issue.3, pp.17-22, 2005.
DOI : 10.1111/j.0955-6419.2005.00369.x

L. Garza, Integrating lean principles in automotive product development: breaking down barriers in culture and process, 2005.

D. K. Sobek, J. K. Liker, and A. C. Ward, Another look at how Toyota integrates product development, Harv. Bus. Rev, vol.76, pp.36-49, 1998.

F. Ballé and M. Ballé, Lean Development, Business Strategy Review, vol.16, issue.3, pp.1-31, 2005.
DOI : 10.1111/j.0955-6419.2005.00369.x

S. Davis, From ???future perfect???: Mass customizing, Planning Review, vol.17, issue.2, pp.16-21, 1989.
DOI : 10.1108/eb054249

R. Duray, P. P. Ward, G. W. Milligan, and W. W. Berry, Approaches to mass customization: configurations and empirical validation, Journal of Operations Management, vol.18, issue.6, pp.1-2, 2000.
DOI : 10.1016/S0272-6963(00)00043-7

S. Kotha, From mass production to mass customization: The case of the National Industrial Bicycle Company of Japan, European Management Journal, vol.14, issue.5, pp.442-450, 1996.
DOI : 10.1016/0263-2373(96)00037-0

A. Joneja and N. Lee, Automated configuration of parametric feeding tools for mass customization, Computers & Industrial Engineering, vol.35, issue.3-4, pp.3-4, 1998.
DOI : 10.1016/S0360-8352(98)00134-X

A. Ross, Selling uniqueness, Manufacturing Engineer, vol.75, issue.6, p.260, 1996.
DOI : 10.1049/me:19960604

M. J. Kay, Making mass customization happen: Lessons for implementation, Planning Review, vol.21, issue.4, pp.14-18, 1993.
DOI : 10.1108/eb054421

S. Khotha, Mass customization: Implementing the emerging paradigm for competitive advantage, Strategic Management Journal, vol.34, issue.S1, pp.21-42, 1995.
DOI : 10.1108/eb054267

G. Da-silveira, D. Borenstein, and F. Fogliatto, Mass customization: Literature review and research directions, International Journal of Production Economics, vol.72, issue.1, pp.1-13, 2001.
DOI : 10.1016/S0925-5273(00)00079-7

F. T. Piller, Mass Customization: Reflections on the State of the Concept, International Journal of Flexible Manufacturing Systems, vol.42, issue.3, pp.313-334, 2005.
DOI : 10.1007/978-3-642-55460-5_5

F. Fogliatto, G. Silveira, and D. Borenstein, The mass customization decade: An updated review of the literature, International Journal of Production Economics, vol.138, issue.1, pp.14-25, 2012.
DOI : 10.1016/j.ijpe.2012.03.002

P. Zipkin, The Limits of Mass Customization, MIT Sloan Manag. Rev, vol.42, issue.3, pp.1-7, 2001.

F. Salvador, P. M. Holan, and F. Piller, Cracking the Code of Mass Customization, MIT Sloan Manag. Rev, vol.50, issue.3, pp.70-78, 2009.

P. Kotler, From mass marketing to mass customization, Planning Review, vol.17, issue.5, pp.10-47, 1989.
DOI : 10.1108/eb054267

J. M. Tien, DATA MINING REQUIREMENTS FOR CUSTOMIZED GOODS AND SERVICES, International Journal of Information Technology & Decision Making, vol.75, issue.04, pp.683-698, 2006.
DOI : 10.1109/34.927459

J. Pine, Mass customizing products and services, Planning Review, vol.21, issue.4, pp.6-55, 1993.
DOI : 10.1108/eb054420

J. S. Spira, Mass customization through training at Lutron Electronics, Planning Review, vol.21, issue.4, pp.23-24, 1993.
DOI : 10.1108/eb054423

J. H. Gilmore, B. J. Pine, and I. , The four faces of customization, Harv. Bus. Rev, pp.91-101, 1997.

J. Lampel and H. Mintzberg, Customizing Customization, Sloan Manage. Rev, vol.38, issue.1, pp.21-30, 1996.

J. D. Frutos and D. Borenstein, A framework to support customer???company interaction in mass customization environments, Computers in Industry, vol.54, issue.2, pp.115-135, 2004.
DOI : 10.1016/j.compind.2003.09.004

M. Carulli, M. Bordegoni, and U. Cugini, An approach for capturing the Voice of the Customer based on Virtual Prototyping, Journal of Intelligent Manufacturing, vol.25, issue.4, pp.887-903, 2013.
DOI : 10.1111/j.1540-4560.1969.tb00619.x

T. Broekhuizen and K. Alsem, Success Factors for Mass Customization: A Conceptual Model, Journal of Market-Focused Management, vol.5, issue.4, pp.309-330, 2004.
DOI : 10.1023/B:JMFM.0000008072.35988.ef

F. Piller, P. Schubert, M. Koch, and K. M. Möslein, Overcoming Mass Confusion: Collaborative Customer Co-Design in Online Communities, Journal of Computer-Mediated Communication, vol.42, issue.2, 2005.
DOI : 10.1002/1520-6653(200124)15:1<13::AID-DIR1001>3.0.CO;2-#

N. Franke and F. Piller, Value Creation by Toolkits for User Innovation and Design: The Case of the Watch Market, Journal of Product Innovation Management, vol.21, issue.6, pp.401-415, 2004.
DOI : 10.1111/j.0737-6782.2004.00094.x

H. Elmaraghy, G. Schuh, W. Elmaraghy, F. Piller, P. Schönsleben et al., Product variety management, CIRP Annals, vol.62, issue.2, pp.629-652, 2013.
DOI : 10.1016/j.cirp.2013.05.007

B. Schwartz, The Paradox of Choice, pp.258-261, 2007.
DOI : 10.1006/obhd.1997.2730

T. Novak, D. Hoffman, and Y. Yung, Measuring the Customer Experience in Online Environments: A Structural Modeling Approach, Marketing Science, vol.19, issue.1, pp.22-44, 2000.
DOI : 10.1287/mksc.19.1.22.15184

M. Holbrook, Consumption experience, customer value, and subjective personal introspection: An illustrative photographic essay, Journal of Business Research, vol.59, issue.6, pp.714-725, 2006.
DOI : 10.1016/j.jbusres.2006.01.008

M. Holbrook, Consumer Value: A framework for analysis and research, 1999.
DOI : 10.4324/9780203010679

R. Sánchez-fernández and M. Á. Iniesta-bonillo, The concept of perceived value: a systematic review of the research, Marketing Theory, vol.12, issue.1, pp.427-451, 2007.
DOI : 10.2307/1251446

H. Chiu, Y. Hsieh, Y. Li, and M. Lee, Relationship marketing and consumer switching behavior, Journal of Business Research, vol.58, issue.12, pp.1681-1689, 2005.
DOI : 10.1016/j.jbusres.2004.11.005

A. Merle, J. L. Chandon, E. Roux, and F. Alizon, Perceived Value of the Mass-Customized Product and Mass Customization Experience for Individual Consumers, Production and Operations Management, vol.42, issue.(3, pp.503-514, 2010.
DOI : 10.1111/j.1937-5956.2009.01011.x

URL : https://hal.archives-ouvertes.fr/hal-00585292

K. Ulrich and S. D. Eppinger, Product design and development, 2011.

F. Salvador, C. Forza, and M. Rungtusanatham, How to mass customize: Product architectures, sourcing configurations, Business Horizons, vol.45, issue.4, pp.61-69, 2002.
DOI : 10.1016/S0007-6813(02)00228-8

S. Xia and L. Wang, Customer requirements mapping method based on association rule mining for mass customization, Journal of Shanghai Jiaotong University (Science), vol.23, issue.1???3, pp.291-296, 2008.
DOI : 10.1007/s12204-008-0291-5

T. U. Pimmler and S. D. Eppinger, Integration analysis of product decompositions, ASME Design Theory and Methodology Conference, pp.1-10, 1994.

K. Ulrich, The role of product architecture in the manufacturing firm, Research Policy, vol.24, issue.3, pp.419-440, 1995.
DOI : 10.1016/0048-7333(94)00775-3

B. Agard and M. Tollenaere, Conception d'assemblages pour la customisation de masseDesign of assembly for mass customization, M??canique & Industries, vol.3, issue.2, pp.113-119, 2002.
DOI : 10.1016/S1296-2139(02)01147-8

E. Feitzinger and H. L. Lee, Mass Customization at Hewlett-Packard: The Power of Postponement, Harv. Bus. Rev, vol.75, pp.116-121, 1997.

F. Salvador, C. Forza, and M. Rungtusanatham, Modularity, product variety, production volume, and component sourcing: theorizing beyond generic prescriptions, Journal of Operations Management, vol.20, issue.5, pp.549-575, 2002.
DOI : 10.1016/S0272-6963(02)00027-X

URL : http://www.alvarestech.com/temp/PDP2011/CDAndrea/MODULARIDADE/SALVADOR 2005 MODULARIZA%C7%C3O.pdf

G. Pahl and W. Beitz, Developing Size Ranges and Modular Products, pp.315-361, 1984.
DOI : 10.1007/978-1-4471-3581-4_8

K. Ulrich and K. Tung, Fundamentals of Product Modularity, ASME Winter Annual Meeting Symposium on Design and Manufacturing Integration, pp.73-79, 1991.
DOI : 10.1007/978-94-011-1390-8_12

M. Hersh, The design and evaluation of Assistive Technology products and sevices Part 1: Design, " International Encyclopedia of Rehabilitation, pp.1-35, 2010.

P. J. Keates and S. Clarkson, Countering Design Exclusion, " in Inclusive Design : Design for the Whole Population, pp.438-453, 2003.

M. Story, J. Mueller, and R. Mace, The Universal Design File: Designing for People of All Ages and Abilities, 1998.

L. , D. Couvreur, and R. Goossens, Design for (every) one : co-creation as a bridge between universal design and rehabilitation engineering, CoDesign, vol.7, issue.2, pp.107-121, 2011.

C. De-l-'europe and R. Resap, 1 sur l'introduction des principes de conception universelle dans les programmes de formation de l'ensemble des professions travaillant dans le domaine de l'environnement bâti, France: Comité des Ministres, p.29, 2001.

J. Woudhuysen, A call for transgenerational design, Applied Ergonomics, vol.24, issue.1, pp.44-46, 1993.
DOI : 10.1016/0003-6870(93)90160-B

S. Keates and P. J. Clarkson, Countering Design Exclusion: An Introduction to inclusive design, 2004.
DOI : 10.1145/960201.957218

M. Winance, Universal design and the challenge of diversity: reflections on the principles of UD, based on empirical research of people???s mobility, Disability and Rehabilitation, vol.94, issue.16, pp.1334-1377, 2014.
DOI : 10.1016/j.destud.2013.11.004

A. Heylighen and G. Nijs, Designing in the absence of sight: Design cognition re-articulated, Design Studies, vol.35, issue.2, pp.113-132, 2014.
DOI : 10.1016/j.destud.2013.11.004

A. Heylighen, Challenging prevailing ways of understanding and designing space, SCAD 2011 Symp. Proc., no, pp.23-40, 2012.

E. Roy, When we design for disability, we all benefit, TEDxMidAtlantic, United States, 2015.

C. For and . Design, DEFINITIONS: Accessible, Adaptable, and Universal Design, 2006.

M. A. Hersh and M. A. Johnson, On modelling assistive technology systems-Part I: Modelling framework, Technol. Disabil, vol.20, pp.193-215, 2008.

D. Mcadams and V. Kostovich, A framework and representation for universal product design, Int. J. Des, vol.5, issue.1, pp.29-42, 2011.

J. Reswick, What is rehabilitation engineering?, Annu. Rev. Rehabil, vol.2, 1982.

J. O. Wobbrock, S. K. Kane, K. Z. Gajos, S. Harada, and J. Froehlich, Ability-Based Design, ACM Transactions on Accessible Computing, vol.3, issue.3, pp.1-36, 2011.
DOI : 10.1145/1952383.1952384

URL : https://dash.harvard.edu/bitstream/handle/1/8667394/ability_based_design.pdf?sequence=1

G. Kondraske, Rehabilitation engineering: towards a systematic process, IEEE Engineering in Medicine and Biology Magazine, vol.7, issue.3, pp.11-16, 1988.
DOI : 10.1109/51.7928

A. Szeto, Rehabilitation engineering and assistive technology, " in Introduction to Biomedical Engineering, pp.211-254, 2005.

A. M. Cook and J. M. Polgar, Principles of Assistive Technology, Assistive Technologies, pp.1-15, 2015.
DOI : 10.1016/B978-0-323-09631-7.00001-6

M. Gois, G. Thomann, and F. Villeneune, Assistive products development: a framework to respond to the value requirements from users and manufacturers points of view, 26th CIRP Design Conference, pp.1-6, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01355139

J. Clarkson, R. Coleman, S. Keates, and C. Lebbon, From margins to mainstream, Inclusive Design : Design for the Whole Population, 2003.

D. Loudon and A. Macdonald, Virtual design verification for inclusive design through software, Proceedings of Cambridge Workshop on Universal Access and Assistive Technology (CWU- AAT'04), pp.191-195, 2004.

H. Dong, S. Keates, and P. Clarkson, Developing and evaluating a booklet for inclusive design, Proceedings of Cambridge Workshop on Universal Access and Assistive Technology (CWU- AAT'04), pp.177-182, 2004.

R. Dawkins, The tyranny of the discontinuous mind, New Statesman, pp.1-7, 2011.

C. Magnier, G. Thomann, F. Villeneuve, and P. Zwolinski, Methods for designing assistive devices extracted from 16 case studies in the literature, International Journal on Interactive Design and Manufacturing (IJIDeM), vol.31, issue.1, pp.93-100, 2012.
DOI : 10.1016/0003-6870(90)90073-7

URL : https://hal.archives-ouvertes.fr/hal-00677757

O. Plos, S. Buisine, A. Aoussat, F. Mantelet, and C. Dumas, A Universalist strategy for the design of Assistive Technology, International Journal of Industrial Ergonomics, vol.42, issue.6, pp.533-541, 2012.
DOI : 10.1016/j.ergon.2012.09.003

J. Veytizou, Caractérisation des spécificités motrices d'utilisateurs en situation de handicap Application à la conception de systèmes personnalisables pour la pratique musicale, 2014.

T. Smith-jackson, M. Nussbaum, and A. Mooney, Accessible cell phone design: development and application of a needs analysis framework, Disability and Rehabilitation, vol.25, issue.10, pp.549-60, 2003.
DOI : 10.1080/0963828031000071732

F. Alvarenga, Uma abordagem metodológica para o projeto de produtos inclusivos, 2006.

J. A. Aguilar-zambrano, M. V. Valencia, M. F. Martínez, C. A. Quiceno, and C. M. Sandoval, Uso de la Teoría de Solución de Problemas Inventivos (TRIZ) en el análisis de productos de apoyo a la movilidad para detectar oportunidades de innovación, Rev. Ing. y Compet, vol.14, issue.1, pp.137-151, 2012.

M. R. Goldberg and J. L. Pearlman, Best Practices for Team-Based Assistive Technology Design Courses, Annals of biomedical engineering, pp.1880-1888, 2013.
DOI : 10.1109/EDUCON.2012.6201151

T. Bougie and Y. F. Heerkens, Building bridges between diseases, disabilities and assistive devices: linking the GBD , ICF and ISO 9999, Geneva, 2010.

H. Bateni and B. E. Maki, Assistive devices for balance and mobility: Benefits, demands, and adverse consequences, Archives of Physical Medicine and Rehabilitation, vol.86, issue.1, pp.134-145, 2005.
DOI : 10.1016/j.apmr.2004.04.023

A. Tukker, Eight types of product???service system: eight ways to sustainability? Experiences from SusProNet, Business Strategy and the Environment, vol.13, issue.4, pp.246-260, 2004.
DOI : 10.1002/bse.414

C. Marchiori, D. Bensmail, D. Gagnon, and D. Pradon, Manual wheelchair satisfaction among long-term users and caregivers: A French study, Journal of Rehabilitation Research and Development, vol.52, issue.2, pp.181-92, 2015.
DOI : 10.1682/JRRD.2014.04.0092

URL : http://doi.org/10.1682/jrrd.2014.04.0092

V. Lemay, Etude des déterminants de la mobilité en fauteuil roulant manuel et leur association avec la participation sociale d'usagers expérimentés ayant une lésion de la moelle épinière, 2011.

R. Vertebral, Constitution de la colonne vertébrale Available: http://spindynamic.fr/colonne-vertebraleconstitution-de-la-colonne-vertebrale/constitutionde-la-colonne-vertebrale, 2016.

S. Center, Understanding Spinal Cord Injury, Atlanta: Shepherd Center, 2011.

N. Vignier, J. F. Ravaud, M. Winance, F. X. Lepoutre, and I. Ville, Demographics of wheelchair users in France: Results of national community-based handicaps-incapacit??s-d??pendance surveys, Journal of Rehabilitation Medicine, vol.40, issue.3, pp.231-239, 2008.
DOI : 10.2340/16501977-0159

. Insee, Les enquêtes Handicaps-Incapacités-Dépendances de, 1998.

V. De-grenoble, Rapport 2014 -2015 de la Commission Communale d'Accessibilité de la Ville de Grenoble

A. Les, . Et, and . Ensembles, Ses normes ont été développées par un comité des cycles et leurs principaux sous-ensembles (ISO/TC 149) de l'Organisation Internationale de Normalisation (ISO)

N. Titre and I. , 2015 Cycles --Axe de pédalier et manivelle à emmanchement carré --Dimensions d'assemblage ISO 6696 : 1989 Cycles --Filetages utilisés dans les ensembles boîtes de pédalier ISO 6697 : 1994 Cycles --Moyeux et roues libres --Dimensions d'assemblage ISO 6698 : 1989 Cycles --Filetages utilisés pour l'assemblage des roues libres sur les moyeux de bicyclettes ISO 6699 : 1990 Cycles --Potence et cintre de guidon --Dimensions d'assemblage ISO 6701 : 1991 Cycles --Dimensions extérieures des écrous de rayons ISO 8488 : 1986 Cycles --Filetages utilisés pour l'assemblage des "accessoires" de direction sur les fourches de bicyclettes ISO 8562, 1981.