183 1.1. Evolution de la MED pour l'étude des milieux granulaires ,
196 3.1. Compression en matrice d'une population monodisperse ,
208 5.1. Etude du gonflement de la population monodisperse représentative dans une cellule cylindrique Etude du gonflement d'une population d'agrégats dans une cellule cylindrique, p.218 ,
Hydrogen absorption by Laves phase related BCC solid solution, Intermetallics, vol.6, issue.6, pp.461-470, 1998. ,
DOI : 10.1016/S0966-9795(97)00088-5
A three-dimensional mathematical model for absorption in a metal hydride bed, Metals II Les milieux granulaires : Entre fluide et solide, B. Andreotti, Y. Forterre, O. Pouliquen, pp.1049-105678, 1978. ,
DOI : 10.1016/S0360-3199(02)00010-1
Unsaturated soil mechanics, Engineering Geology, vol.106, issue.1-2, pp.26-39, 2009. ,
DOI : 10.1016/j.enggeo.2009.02.010
Simulation and experimental validation of a hydrogen storage tank with metal hydrides, International Journal of Hydrogen Energy, vol.33, issue.1, pp.98-104, 2008. ,
DOI : 10.1016/j.ijhydene.2007.08.030
URL : https://hal.archives-ouvertes.fr/hal-00266690
Metallic Hydrides I: Hydrogen Storage and Other Gas-Phase Applications, MRS Bulletin, vol.164, issue.09 ,
DOI : 10.1016/S0925-8388(01)01857-6
Dilatation investigation of porous intermetallic samples during reversible hydrogenation, International Journal of Hydrogen Energy, vol.21, issue.11-12, pp.1115-1120 ,
DOI : 10.1016/S0360-3199(96)00080-8
Discrete numerical investigation of the ratcheting phenomenon in granular materials, Engineering Materials and Processes The DEM-PFV model Enhancement of hydrogen sorption in magnesium hydride using expanded natural graphite, pp.604-614, 2008. ,
Enhancement of hydrogen sorption in magnesium hydride using expanded natural graphite, International Journal of Hydrogen Energy, vol.34, issue.20, pp.8589-8596, 2009. ,
DOI : 10.1016/j.ijhydene.2009.07.112
The hydrogen storage characteristics of Ti???Cr???V alloys, Journal of Alloys and Compounds, vol.288, issue.1-2, pp.294-298, 1999. ,
DOI : 10.1016/S0925-8388(99)00096-1
A discrete numerical model for granular assemblies, G??otechnique, vol.29, issue.1, pp.47-65, 1979. ,
DOI : 10.1680/geot.1979.29.1.47
Advances in discrete element method applied to soil, rock and concrete mechanics, in: state of the art of geotechnical engineering, Electronic Journal of Geotechnical Engineering, 2009. ,
Structural and thermodynamic properties of the pseudo-binary TiCr2???xVx compounds with 0.0???x???1.2, Journal of Alloys and Compounds, vol.340, issue.1-2, pp.101-107 ,
DOI : 10.1016/S0925-8388(02)00013-0
Thermo-mechanical analysis of packed beds for lrge-scale storage of high temperature heat Metal hydride wall stress measurements on a four inch short (fish) bed, E.G.Estochen, J.E.Klein, pp.1199-1207, 2004. ,
A figure of merit assessment of the routes to hydrogen, International Journal of Hydrogen Energy, vol.30, issue.8, pp.809-819, 2005. ,
DOI : 10.1016/j.ijhydene.2005.02.003
Flows of Dense Granular Media, Annual Review of Fluid Mechanics, vol.40, issue.1, pp.1-24, 2008. ,
DOI : 10.1146/annurev.fluid.40.111406.102142
URL : https://hal.archives-ouvertes.fr/hal-01432132
Swelling and creep observed in AISI 304 fuel pin cladding from three MOX fuel assemblies irradiated in, Modélisation Du Comportement Viscoplastique Des Poudres Métalliques, pp.1273-127953, 1981. ,
Simulation of granular material behaviour using, Procedia Earth and Planetary Science 1, pp.598-605, 2009. ,
Hydrogen Storage Tank having Metal Hydrides, 2011. ,
DEM and experimental analysis of the water retention curve in polydisperse granular media, Powder Technology, vol.208, issue.2, pp.296-3001013, 1985. ,
DOI : 10.1016/j.powtec.2010.08.019
URL : https://hal.archives-ouvertes.fr/hal-00691852
Conception et fabrication de combustibles à base d'uranium, 2008. ,
Thermal conductivity of metal hydride materials for storage of hydrogen: Experimental investigation, International Journal of Hydrogen Energy, vol.23, issue.2, pp.107-114, 1987. ,
DOI : 10.1016/S0360-3199(97)00020-7
Modeling of high-density compaction of granular materials by the Discrete Element Method, International Journal of Solids and Structures, vol.46, issue.18-19, pp.3357-3364, 2009. ,
DOI : 10.1016/j.ijsolstr.2009.05.008
An overview of hydrogen production technologies, Catalysis Today, vol.139, issue.4, pp.244-260, 2009. ,
DOI : 10.1016/j.cattod.2008.08.039
Expansive clays as two-phase, deformable reacting continua: concepts and modeling options, Proc. of theWorkshop on Chemo-mechanical Coupling in Clays: From Nanoscale to Engineering Applications, pp.105-120, 2001. ,
Hydrogen absorption properties of TiCrA (A ??? V, Mo or other transition metal) B.C.C. solid solution alloys, Journal of Alloys and Compounds, vol.231, issue.1-2, pp.528-532, 1995. ,
DOI : 10.1016/0925-8388(95)01859-X
Measurement of the effective thermal conductivity of a Mg-MgH2 packed bed with oscillating heating A model for fission gas release and gaseous swelling of the uranium dioxide fuel coupled with the FALCON code, Stress induced in metal hydrogen powder by hidriding reaction Proceedings of the Miami Internationa Symposium on Metal-Hydrogen Systems, pp.356-357447, 1981. ,
Near net shape processing of a sintered alumina component: adjustment of pressing parameters through finite element simulation, International Journal of Mechanical Sciences, vol.44, issue.12, pp.2523-2539, 2002. ,
DOI : 10.1016/S0020-7403(02)00189-3
Structures of the Intermediate Phases Ni10Zr7 and, Acts Cryst, vol.15, issue.894, 1962. ,
A new open-source software developed for numerical simulations using discrete modeling methods An analytical solution of different configurations of the linear viscoelastic normal and frictional-elastic tangential contact model, Journal of Alloys and Compounds Comput. Methods Appl. Mech. Engrg, vol.419, issue.197, pp.256-2614429, 2006. ,
An analytical solution of different configurations of the linear viscoelastic normal and frictional-elastic tangential contact model, Chemical Engineering Science, vol.62, issue.23, pp.6914-6926, 2007. ,
DOI : 10.1016/j.ces.2007.08.049
Effects of V content on hydrogen storage properties of VeTieCr alloys with high desorption pressure, International Journal of Hydrogen Energy International Journal of Hydrogen Energy, vol.37, issue.35, pp.3677-3682, 2010. ,
Densification behavior of aluminum alloy powder under cold compaction, International Journal of Mechanical Sciences, vol.44, issue.7, pp.1295-1308, 2002. ,
DOI : 10.1016/S0020-7403(02)00054-1
Techniques de l'ingénieur, N1206 Pharmaceutical powder technology : from art to science: the challenge of the FDA's Process Analytical Technology initiative, Lemaignan, Techniques de l'ingénieur, N1280, 2010 [Leuenberger2005], pp.3-25, 2010. ,
Biohydrogen production: prospects and limitations to practical application, International Journal of Hydrogen Energy, vol.29, issue.2, pp.173-185, 2004. ,
DOI : 10.1016/S0360-3199(03)00094-6
Cyclic hydrogen absorption???desorption characteristics of TiCrV and Ti0.8Cr1.2VTi0.8Cr1.2V alloys, International Journal of Hydrogen Energy, vol.32, issue.18, pp.4966-4972, 2007. ,
DOI : 10.1016/j.ijhydene.2007.07.057
Experimental and numerical analysis of dynamic metal hydride hydrogen storage systems, Journal of Power Sources, vol.174, issue.1, pp.282-293133, 1984. ,
DOI : 10.1016/j.jpowsour.2007.09.021
Hydride formation rates of titanium-based b.c.c. solid solution alloys, Étude du système Fe?Ti?V et de ses applications au stockage de l'hydrogène, pp.361-364, 1984. ,
DOI : 10.1016/0022-5088(84)90420-X
Stress Analysis of Hydride Bed Vessels Used for Tritium Storage, Fusion Technology, vol.21, issue.2P2, pp.1011-1016, 1992. ,
DOI : 10.13182/FST92-A29884
Hydrogen storage in metal hydride tanks equipped with metal foam heat exchanger, International Journal of Hydrogen Energy, vol.34, issue.23, pp.9393-9401709, 1996. ,
DOI : 10.1016/j.ijhydene.2009.09.043
All the Brazil nuts are not on top: Vibration induced granular size segregation of binary, ternary and multi-sized mixtures, Powder Technology 205 Étude des propriétés mécaniques et acoustiques d'un milieu granulaire sous chargements cycliques, pp.42-51, 2008. ,
DOI : 10.1016/j.powtec.2010.08.062
Hydrogen-induced structural transformation in TiV0.8Cr1.2 studied by in situ neutron diffraction, Journal of Alloys and Compounds, vol.442, issue.1-2, pp.49-54, 2007. ,
DOI : 10.1016/j.jallcom.2006.10.168
Hydrogen sorption properties of compounds based on BCC Ti1???xV1???yCr1+x+y alloys, Journal of Alloys and Compounds, vol.536, pp.1-6 ,
DOI : 10.1016/j.jallcom.2012.05.008
Honeycomb hydrogen storage structure, 2004. ,
Lattice expanding behaviour and degradation of LaNi5-based alloys, Journal of Alloys and Compounds, vol.267, issue.1-2, pp.205-210271, 1998. ,
DOI : 10.1016/S0925-8388(97)00503-3
Relaxation of internal stress generated in hydrogen absorbing alloy vessels, Satics and kinematics of granular Materials Journal of Numerical and Analitical Methods Geomechanics 27, pp.921-9291207, 1992. ,
DOI : 10.1016/S0360-3199(97)00158-4
Pulverization mechanism of hydrogen storage alloys on microscale packing structure, International Journal of Hydrogen Energy, vol.37, issue.14, pp.10715-10723 ,
DOI : 10.1016/j.ijhydene.2012.04.061
Investigation of wall stress development and packing ratio distribution in the metal hydride reactor, International Journal of Hydrogen Energy, vol.37, issue.8, pp.6686-6693 ,
DOI : 10.1016/j.ijhydene.2012.01.097
The reaction of hydrogen with alloys of vanadium and titanium, Journal of the Less Common Metals, vol.72, issue.2, pp.159-165, 1980. ,
DOI : 10.1016/0022-5088(80)90135-6
Version 3.1, Itasca Consulting Group, International Journal of Rock Mechanics & Mining Sciences, vol.41, pp.1329-1364, 2004. ,
Contact dynamics as a nonsmooth discrete element method, Mechanics of Materials 41, pp.715-728, 2009. ,
DOI : 10.1016/j.mechmat.2009.01.028
URL : https://hal.archives-ouvertes.fr/hal-00689866
Friction effect on stresses in ensiled granular media Formation and Properties of Iron Titanium, Revolution Powder Analyzer User Manual, pp.1113-1124218, 1974. ,
Géométrie et propriétés élastiques des matériaux granulaires, 2007. ,
Influence of expansion of metal hydride during hydriding???dehydriding cycles, Journal of Alloys and Compounds, vol.253, issue.254, pp.253-254682, 1997. ,
DOI : 10.1016/S0925-8388(96)02893-9
Modelling the evolution of temperature inside LaNi4.78Sn0.22 storage tank during refueling, Materials & Design, vol.30, issue.4, pp.954-957, 2009. ,
DOI : 10.1016/j.matdes.2008.07.007
URL : https://hal.archives-ouvertes.fr/hal-00348177
Wind energy and the hydrogen economy???review of the technology, Solar Energy, vol.78, issue.5, pp.647-660, 2005. ,
DOI : 10.1016/j.solener.2005.01.002
Plasticity theory for porous metals, International Journal of Mechanical Sciences, vol.18, issue.6, pp.285-291, 1976. ,
DOI : 10.1016/0020-7403(76)90030-8
Effects of mechanical milling on hydrogen storage properties of Ti0.32Cr0.43V0.25Ti0.32Cr0.43V0.25 alloy, 32Cr0.43V0.25 alloy, Cohesive Particle Model using the Discrete Element Method on the Yade Platform, pp.4961-4965, 2007. ,
DOI : 10.1016/j.ijhydene.2007.07.010
Polygons vs. clumps of discs: A numerical study of the influence of grain shape on the mechanical behaviour of granular materials, Powder Technology, vol.208, issue.2, pp.279-288, 2011. ,
DOI : 10.1016/j.powtec.2010.08.017
Reversible hydrogen absorption and desorption achieved by irreversible phase transition, Journal of Alloys and Compounds, vol.311, issue.2, pp.1-4, 2000. ,
DOI : 10.1016/S0925-8388(00)01083-5
Fission gas release and swelling in uranium???plutonium mixed nitride fuels, Journal of Nuclear Materials, vol.327, issue.2-3, pp.77-87, 2004. ,
DOI : 10.1016/j.jnucmat.2004.01.002
Desiccation and cracking behaviour of clay layer from slurry state under wetting???drying cycles, Geoderma, vol.166, issue.1, pp.111-118, 2011. ,
DOI : 10.1016/j.geoderma.2011.07.018
URL : https://hal.archives-ouvertes.fr/hal-00629665
Hydrogen-fueled internal combustion engines, Progress in Energy and Combustion Science 35, pp.490-527, 2009. ,
DOI : 10.1016/j.pecs.2009.08.001
Grains3D, a flexible DEM approach for particles of arbitrary convex shape ??? Part I: Numerical model and validations, Powder Technology, vol.224, pp.374-389 ,
DOI : 10.1016/j.powtec.2012.03.023
Enhancing the ABAQUS thermomechanics code to simulate multipellet steady and transient LWR fuel rod behavior, Journal of Nuclear Materials, vol.415, issue.1, pp.74-83, 2008. ,
DOI : 10.1016/j.jnucmat.2011.05.044
Powder Technology 138, pp.216-228, 2003. ,
The Yade Project, 2011. ,
Alloying effects on the hydriding properties of vanadium at low hydrogen pressures, Journal of Alloys and Compounds, vol.337, issue.1-2, pp.264-268, 2002. ,
DOI : 10.1016/S0925-8388(01)01936-3
A non-linear model for internal stress superplasticity, Acta Materialia, vol.45, issue.12, pp.5285-5294, 1997. ,
DOI : 10.1016/S1359-6454(97)00186-9
Internal-stress plasticity in titanium by cyclic alloying/dealloying with hydrogen, Journal of Materials Processing Technology, vol.117, issue.3, pp.409-417, 2001. ,
DOI : 10.1016/S0924-0136(01)00801-9