D. Montezinos, B. G. Wells, and J. L. , The use of ruthenium in hypochlorite as a stain for polymeric materials, Journal of Polymer Science: Polymer Letters Edition, vol.23, issue.8, p.421, 1985.
DOI : 10.1002/pol.1985.130230805

A. A. Galuska, R. R. Poulter, and K. O. Mcelrath, Force Modulation AFM of Elastomer Blends: Morphology, Fillers and Cross-linking, Surface and Interface Analysis, vol.12, issue.6, p.418, 1997.
DOI : 10.1116/1.589080

M. Bousmina, A. Ait-kadi, and J. B. Faisant, Determination of shear rate and viscosity from batch mixer data, Journal of Rheology, vol.43, issue.2, p.415, 1999.
DOI : 10.1122/1.551044

M. Maric and C. W. Macosko, Improving polymer blend dispersion in mini-mixers, Polymer Engineering & Science, vol.13, issue.1, p.118, 2001.
DOI : 10.1098/rspa.1932.0169

A. P. Harvey, M. R. Mackley, and P. Stonestreet, Operation and Optimization of an Oscillatory Flow Continuous Reactor, Industrial & Engineering Chemistry Research, vol.40, issue.23, p.5371, 2001.
DOI : 10.1021/ie0011223

A. Luciani and L. A. Utracki, The Extensional Flow Mixer, EFM, International Polymer Processing, vol.11, issue.4, p.299, 1996.
DOI : 10.3139/217.960299

M. Tokihisa, K. Yakemoto, T. Sakai, L. A. Utracki, M. Sepehr et al., Extensional flow mixer for polymer nanocomposites, Polymer Engineering & Science, vol.42, issue.8, p.1040, 2006.
DOI : 10.1002/jlac.18510780302

D. Bourry, F. Godbille, R. E. Khayat, A. Luciani, J. Picot et al., Extensional flow of polymeric dispersions, Polymer Engineering & Science, vol.27, issue.6, p.1072, 1999.
DOI : 10.3139/217.960299

M. Meller, A. Luciani, and J. A. Manson, Mixing Homologous High Viscosity Ratio Polymer Blends in Converging Flow, International Polymer Processing, vol.14, issue.3, p.221, 1999.
DOI : 10.3139/217.1549

M. Meller, A. Luciani, and J. A. Manson, Flow through a convergence. Part 2: Mixing of high viscosity ratio polymer blends, Polymer Engineering & Science, vol.2, issue.3, p.634, 2002.
DOI : 10.1002/app.1993.070490510

M. Meller, A. Luciani, A. Sarioglu, and J. A. Manson, Flow through a convergence. Part 1: Critical conditions for unstable flow, Polymer Engineering & Science, vol.91, issue.3, p.611, 2002.
DOI : 10.1016/S0377-0257(99)00107-X

R. F. Westover, Effect of hydrostatic pressure on polyethylene melt rheology, Polymer Engineering and Science, vol.62, issue.1, p.14, 1961.
DOI : 10.1002/pen.760010105

M. R. Mackley, R. T. Marshall, and J. Smeulders, The multipass rheometer, Journal of Rheology, vol.39, issue.6, p.1293, 1995.
DOI : 10.1122/1.550637

Y. Son, Development of a novel microcompounder for polymer blends and nanocomposite, Journal of Applied Polymer Science, vol.35, issue.2, p.609, 2009.
DOI : 10.1002/app.28890

M. Bouquey, C. Loux, R. Muller, and G. Bouchet, Morphological study of two-phase polymer blends during compounding in a novel compounder on the basis of elongational flows, Journal of Applied Polymer Science, vol.27, issue.1, p.482, 2011.
DOI : 10.3139/9783446433717
URL : https://hal.archives-ouvertes.fr/hal-01446983

C. Loux, Modélisation du fonctionnement d'un nouveau type de mélangeur : simulation des écoulements, validation sur des systèmes modèles et optimisation du procédé, Thèse de Doctorat, 2011.

G. Astarita, Objective and generally applicable criteria for flow classification, Journal of Non-Newtonian Fluid Mechanics, vol.6, issue.1, p.69, 1979.
DOI : 10.1016/0377-0257(79)87004-4

N. Dargère, Nouvelle voie de réticulation et de renforcement d'un TPV de type PP/EPDM, Thèse de doctorat, 2012.

C. Tzoganakis, J. Vlachopoulos, and A. E. Hamielec, Production of controlled-rheology polypropylene resins by peroxide promoted degradation during extrusion, Polymer Engineering and Science, vol.19, issue.3, p.170, 1988.
DOI : 10.1002/pen.760280308

H. Azizi and I. Ghasemi, Reactive extrusion of polypropylene: production of controlled-rheology polypropylene (CRPP) by peroxide-promoted degradation, Polymer Testing, vol.23, issue.2, p.137, 2004.
DOI : 10.1016/S0142-9418(03)00072-2

J. F. Agassant, P. Avenas, J. P. Sergent, B. Vergnes, and M. Vincent, Thermique et échanges de chaleur dans les procédés, La mise en forme des matières plastiques, 1996.

N. Dargère, Nouvelle voie de réticulation et de renforcement d'un TPV de type PP/EPDM, Thèse de doctorat, Université Claude Bernard -Lyon 1 (2012) REFERENCES BIBLIOGRAPHIQUES 1. L.A. Utracki, Commercial Polymer Blends, 1998.

S. Wu, Phase structure and adhesion in polymer blends: A criterion for rubber toughening, Polymer, vol.26, issue.12, p.1855, 1985.
DOI : 10.1016/0032-3861(85)90015-1

A. Monticciolo, P. Cassagnau, and A. Michel, Fibrillar morphology development of PE/PBT blends: Rheology and solvent permeability, Polymer Engineering & Science, vol.1, issue.11, p.1882, 1998.
DOI : 10.1002/pen.10358

C. David, M. Trojan, R. Jacobs, and M. Piens, Morphology of polyethylene blends: 1. From spheres to fibrils and extended co-continuous phases in blends of polyethylene with styrene-isoprene-styrene triblock copolymers, Polymer, vol.32, issue.3, p.510, 1991.
DOI : 10.1016/0032-3861(91)90458-U

M. R. Kamal, H. Garmabi, S. Hozhabr, and L. Arghyris, The development of laminar morphology during extrusion of polymer blends, Polymer Engineering and Science, vol.1, issue.30, p.41, 1995.
DOI : 10.1002/apmc.1973.050290103

J. Li, P. L. Ma, and B. D. Favis, The Role of the Blend Interface Type on Morphology in Cocontinuous Polymer Blends, Macromolecules, vol.35, issue.6, p.2005, 2002.
DOI : 10.1021/ma010104+

I. S. Miles and A. Zurek, Preparation, structure, and properties of two-phase co-continuous polymer blends, Polymer Engineering and Science, vol.25, issue.12, p.796, 1988.
DOI : 10.1002/pen.760281205

Z. Bartczak, A. S. Argon, R. E. Cohen, and M. Weinberg, Toughness mechanism in semi-crystalline polymer blends: I. High-density polyethylene toughened with rubbers, Polymer, vol.40, issue.9, p.2331, 1999.
DOI : 10.1016/S0032-3861(98)00445-5

J. Z. Liang and R. K. Li, Rubber toughening in polypropylene: A review, Journal of Applied Polymer Science, vol.33, issue.2, p.409, 2000.
DOI : 10.1023/A:1004686708639

B. D. Favis, Factors influencing the morphology of immiscible polymer blends, Polymer Blends Proc. R. Soc. London, pp.834-875, 1932.

I. Manas-zloczower, Mixing and Compounding of Polymers : Theory and Practice, 2009.
DOI : 10.3139/9783446433717

H. P. Grace, DISPERSION PHENOMENA IN HIGH VISCOSITY IMMISCIBLE FLUID SYSTEMS AND APPLICATION OF STATIC MIXERS AS DISPERSION DEVICES IN SUCH SYSTEMS, Chemical Engineering Communications, vol.10, issue.3-6, p.225, 1982.
DOI : 10.1002/aic.690150512

Y. W. Stegeman, Time dependent behavior of droplets in elongational flows, Proc. R. Soc. London, pp.150-322, 1935.

K. M. Jansen, W. G. Agterof, and J. Mellema, Droplet breakup in concentrated emulsions, Journal of Rheology, vol.45, issue.1, p.227, 2001.
DOI : 10.1122/1.1333001

B. D. Favis, The effect of processing parameters on the morphology of an immiscible binary blend, Journal of Applied Polymer Science, vol.39, issue.2, p.285, 1990.
DOI : 10.1002/app.1990.070390207

B. D. Favis and J. P. Chalifoux, The effect of viscosity ratio on the morphology of polypropylene/polycarbonate blends during processing, Polymer Engineering and Science, vol.23, issue.21, p.1591, 1987.
DOI : 10.1098/rspa.1954.0228

C. E. Scott and C. W. Macosko, Morphology development during the initial stages of polymer-polymer blending, Polymer, vol.36, issue.3, p.461, 1995.
DOI : 10.1016/0032-3861(95)91554-K

H. Van-oene, Modes of dispersion of viscoelastic fluids in flow, Journal of Colloid and Interface Science, vol.40, issue.3, p.448, 1972.
DOI : 10.1016/0021-9797(72)90355-4

T. Cherdhirankorn, W. Lerdwijitjarud, A. Sirivat, and R. G. Larson, Dynamics of vorticity stretching and breakup of isolated viscoelastic droplets in an immiscible viscoelastic matrix, Rheologica Acta, vol.43, issue.3, p.246, 2004.
DOI : 10.1007/s00397-003-0340-9

W. Lerdwijitjarud, A. Sirivat, and R. G. Larson, Influence of dispersed-phase elasticity on steady-state deformation and breakup of droplets in simple shearing flow of immiscible polymer blends, Journal of Rheology, vol.48, issue.4, p.843, 2004.
DOI : 10.1122/1.1753275

I. Delaby, B. Ernst, Y. Germain, and R. Muller, Droplet deformation in polymer blends during uniaxial elongational flow: Influence of viscosity ratio for large capillary numbers, Journal of Rheology, vol.38, issue.6, p.1705, 1994.
DOI : 10.1122/1.550568

I. Delaby, B. Ernst, and R. Muller, Drop deformation during elongational flow in blends of viscoelastic fluids. Small deformation theory and comparison with experimental results, Rheologica Acta, vol.146, issue.6, p.525, 1995.
DOI : 10.1007/BF00712313

W. J. Milliken and L. G. Leal, Deformation and breakup of viscoelastic drops in planar extensional flows, Journal of Non-Newtonian Fluid Mechanics, vol.40, issue.3, p.355, 1991.
DOI : 10.1016/0377-0257(91)87018-S

P. H. Elemans, H. L. Bos, J. M. Janssen, and H. E. Meijer, Transient phenomena in dispersive mixing, Chemical Engineering Science, vol.48, issue.2, p.267, 1993.
DOI : 10.1016/0009-2509(93)80014-H

M. Maric and C. W. Macosko, Improving polymer blend dispersion in mini-mixers, Polymer Engineering & Science, vol.13, issue.1, p.118, 2001.
DOI : 10.1098/rspa.1932.0169

A. Luciani and L. A. Utracki, The Extensional Flow Mixer, EFM, International Polymer Processing, vol.11, issue.4, p.299, 1996.
DOI : 10.3139/217.960299

D. Bourry, F. Godbille, R. E. Khayat, A. Luciani, J. Picot et al., Extensional flow of polymeric dispersions, Polymer Engineering & Science, vol.27, issue.6, p.1072, 1999.
DOI : 10.3139/217.960299

M. Bousmina, A. Ait-kadi, and J. B. Faisant, Determination of shear rate and viscosity from batch mixer data, Journal of Rheology, vol.43, issue.2, p.415, 1999.
DOI : 10.1122/1.551044

W. P. Cox and E. H. Merz, Correlation of dynamic and steady flow viscosities, Journal of Polymer Science, vol.28, issue.118, p.619, 1958.
DOI : 10.1002/pol.1958.1202811812

O. Chung and A. Y. Coran, The Morphology of Rubber/Plastic Blends, Rubber Chemistry and Technology, vol.70, issue.5, p.781, 1997.
DOI : 10.5254/1.3538460

D. Bourry and B. D. Favis, Cocontinuity and phase inversion in HDPE/PS blends: Influence of interfacial modification and elasticity, Journal of Polymer Science Part B: Polymer Physics, vol.36, issue.11, p.1889, 1998.
DOI : 10.1002/(SICI)1099-0488(199808)36:11<1889::AID-POLB10>3.0.CO;2-3

G. Martin, C. Barres, P. Sonntag, N. Garois, and P. Cassagnau, Morphology development in thermoplastic vulcanizates (TPV): Dispersion mechanisms of a pre-crosslinked EPDM phase, European Polymer Journal, vol.45, issue.11, p.3257, 2009.
DOI : 10.1016/j.eurpolymj.2009.07.012
URL : https://hal.archives-ouvertes.fr/hal-00423756

P. A. Bhadane, M. F. Champagne, M. A. Huneault, F. Tofan, and B. D. Favis, Erosion-dependant continuity development in high viscosity ratio blends of very low interfacial tension, Journal of Polymer Science Part B: Polymer Physics, vol.69, issue.49, p.1919, 2006.
DOI : 10.5254/1.3538460

C. Friedrich, W. Gleinser, E. Korat, D. Maier, and J. Weese, Comparison of sphere???size distributions obtained from rheology and transmission electron microscopy in PMMA/PS blends, Journal of Rheology, vol.39, issue.6, p.1411, 1995.
DOI : 10.1122/1.550720

C. Weis, J. Leukel, K. Borkenstein, D. Maier, W. Gronski et al., Morphological and rheological detection of the phase inversion of PMMA/PS polymer blends, Polymer Bulletin, vol.40, issue.2-3, p.235, 1998.
DOI : 10.1007/s002890050247

J. F. Palierne, Linear rheology of viscoelastic emulsions with interfacial tension, Rheologica Acta, vol.27, issue.3, p.204, 1990.
DOI : 10.1007/BF01331356

D. Graebling, R. Muller, and J. F. Palierne, Linear viscoelastic behavior of some incompatible polymer blends in the melt. Interpretation of data with a model of emulsion of viscoelastic liquids, Macromolecules, vol.26, issue.2, p.320, 1993.
DOI : 10.1021/ma00054a011
URL : https://hal.archives-ouvertes.fr/hal-01615988

M. Doi and T. Ohta, Dynamics and rheology of complex interfaces. I, The Journal of Chemical Physics, vol.19, issue.2, p.1242, 1991.
DOI : 10.1017/S0022112078002530

H. M. Lee and O. O. Park, Rheology and dynamics of immiscible polymer blends, Journal of Rheology, vol.38, issue.5, p.1405, 1994.
DOI : 10.1122/1.550551

E. H. Kerner and P. , The Elastic and Thermo-elastic Properties of Composite Media, Proceedings of the Physical Society. Section B, vol.69, issue.8, p.808, 1956.
DOI : 10.1088/0370-1301/69/8/305

S. Mani, M. Malone, and W. Hh, Influence of phase separation on the linear viscoelastic behavior of a miscible polymer blend, Journal of Rheology, vol.36, issue.8, p.1625, 1992.
DOI : 10.1122/1.550277

I. Vinckier and H. M. Laun, Manifestation of phase separation processes in oscillatory shear: droplet-matrix systems versus co-continuous morphologies, Rheologica Acta, vol.38, issue.4, p.274, 1999.
DOI : 10.1007/s003970050179

B. D. Favis, Factors influencing the morphology of immiscible polymer blends, Polymer Blends, vol.1, 2000.

W. P. Gergen, R. G. Lutz, and S. Davidson, Hydrogenated block copolymers in thermoplastic elastomer interpenetrating networks, Thermoplastic elastomers: a comprehensive review, 1987.

J. Lyngaae-jorgensen, K. L. Rasmussen, E. A. Chtcherbakova, and L. A. Utracki, Flow induced deformation of dual-phase continuity in polymer blends and alloys. Part I, Polymer Engineering & Science, vol.37, issue.2, p.1060, 1999.
DOI : 10.1016/0032-3861(93)90209-S

L. A. Utracki, On the viscosity???concentration dependence of immiscible polymer blends, Journal of Rheology, vol.35, issue.8, p.1615, 1991.
DOI : 10.1122/1.550248

G. Martin, C. Barres, P. Sonntag, N. Garois, and P. Cassagnau, Co-continuous morphology and stress relaxation behaviour of unfilled and silica filled PP/EPDM blends, Materials Chemistry and Physics, vol.113, issue.2-3, p.889, 2009.
DOI : 10.1016/j.matchemphys.2008.08.069
URL : https://hal.archives-ouvertes.fr/hal-00374481

P. Sengupta and J. W. Noordermeer, Three-Dimensional Structure of Olefinic Thermoplastic Elastomer Blends Using Electron Tomography, Macromolecular Rapid Communications, vol.39, issue.7, p.542, 2005.
DOI : 10.1007/978-1-4757-2163-8

S. Steinmann, W. Gronski, and C. Friedrich, Quantitative rheological evaluation of phase inversion in two-phase polymer blends with cocontinuous morphology, Rheologica Acta, vol.41, issue.1-2, p.77, 2002.
DOI : 10.1007/s003970200007

J. A. Galloway and C. W. Macosko, Comparison of methods for the detection of cocontinuity in poly(ethylene oxide)/polystyrene blends, Polymer Engineering and Science, vol.60, issue.49, p.714, 2004.
DOI : 10.1002/9783527617968

M. Castro, F. Prochazka, and C. Carrot, Cocontinuity in immiscible polymer blends: A gel approach, Journal of Rheology, vol.49, issue.1, p.149, 2005.
DOI : 10.1122/1.1835341
URL : https://hal.archives-ouvertes.fr/hal-00454997

S. Chaput, C. Carrot, M. Castro, and F. Prochazka, Co-continuity interval in immiscible polymer blends by dynamic mechanical spectroscopy in the molten and solid state, Rheologica Acta, vol.40, issue.5, p.417, 2004.
DOI : 10.1007/s00397-004-0369-4
URL : https://hal.archives-ouvertes.fr/hal-00454926

J. Portal, C. Carrot, J. C. Majeste, S. Cocard, V. Pelissier et al., Coupling of various methods for the investigation of the morphology of blends of natural rubber and polybutadiene, Polymer Engineering & Science, vol.69, issue.6, p.1068, 2008.
DOI : 10.5254/1.3547643

D. Graebling and R. Muller, Rheological behavior of polydimethylsiloxane/polyoxyethylene blends in the melt. Emulsion model of two viscoelastic liquids, Journal of Rheology, vol.34, issue.2, p.193, 1990.
DOI : 10.1122/1.550123
URL : https://hal.archives-ouvertes.fr/hal-01615991

J. F. Palierne, Linear rheology of viscoelastic emulsions with interfacial tension, Rheologica Acta, vol.27, issue.3, p.204, 1990.
DOI : 10.1007/BF01331356

G. N. Avgeropoulos, F. C. Weissert, P. H. Biddison, and G. G. Boehm, Heterogeneous Blends of Polymers. Rheology and Morphology, Rubber Chemistry and Technology, vol.49, issue.1, p.93, 1976.
DOI : 10.5254/1.3534954

D. R. Paul and J. W. Barlow, Polymer Blends, Journal of Macromolecular Science, Part C, vol.35, issue.1, p.109, 1980.
DOI : 10.1007/BF00548168

G. M. Jordhamo, J. A. Manson, and L. H. Sperling, Phase continuity and inversion in polymer blends and simultaneous interpenetrating networks, Polymer Engineering and Science, vol.26, issue.61, p.517, 1986.
DOI : 10.1007/978-94-017-5349-4

I. S. Miles and A. Zurek, Preparation, structure, and properties of two-phase co-continuous polymer blends, Polymer Engineering and Science, vol.25, issue.12, p.796, 1988.
DOI : 10.1002/pen.760281205

R. M. Ho, C. H. Wu, and A. C. Su, Morphology of plastic/rubber blends, Polymer Engineering and Science, vol.8, issue.9, p.511, 1990.
DOI : 10.1080/00222358008081052

I. M. Krieger and T. J. Dougherty, A Mechanism for Non???Newtonian Flow in Suspensions of Rigid Spheres, Transactions of the Society of Rheology, vol.3, issue.1, p.137, 1959.
DOI : 10.1122/1.548848

A. Luciani and J. Jarrin, Morphology development in immiscible polymer blends, Polymer Engineering & Science, vol.35, issue.12, p.1619, 1996.
DOI : 10.1002/pen.10558

H. Van-oene, Modes of dispersion of viscoelastic fluids in flow, Journal of Colloid and Interface Science, vol.40, issue.3, p.448, 1972.
DOI : 10.1016/0021-9797(72)90355-4

D. Quintens, G. Groeninckx, M. Guest, and L. Aerts, Mechanical behavior related to the phase morphology of PC/SAN polymer blends, Polymer Engineering and Science, vol.26, issue.22, p.1474, 1990.
DOI : 10.1007/978-94-017-5349-4

P. Pötschke and D. R. Paul, Detection of co-continuous structures in SAN/PA6 blends by different methods, Macromolecular Symposia, vol.198, issue.1, p.69, 2003.
DOI : 10.1002/masy.200350807

S. Wu, Phase structure and adhesion in polymer blends: A criterion for rubber toughening, Polymer, vol.26, issue.12, p.1855, 1985.
DOI : 10.1016/0032-3861(85)90015-1

A. G. Machiels, K. F. Denys, J. Van-dam, and A. P. De-boer, Formation, stability, and properties ofin-situ composites based on blends of a thermotropic liquid crystalline polymer and a thermoplastic elastomer, Polymer Engineering & Science, vol.37, issue.19, p.2451, 1996.
DOI : 10.1002/pen.10643

P. Van-puyvelde and P. Moldenaers, Rheology-Morphology Relationships in Immiscible Polymer Blends, Micro-and Nanostructured Polymer Blend Systems: Phase Morphology and Interfaces C. Harrats, 2006.
DOI : 10.1201/9781420026542.ch13

J. Reignier, B. D. Favis, and M. Heuzey, Factors influencing encapsulation behavior in composite droplet-type polymer blends, Polymer, vol.44, issue.1, p.49, 2003.
DOI : 10.1016/S0032-3861(02)00684-5

C. Tufano, G. W. Peters, P. Van-puyvelde, and H. E. Meijer, Transient interfacial tension and morphology evolution in partially miscible polymer blends, Journal of Colloid and Interface Science, vol.328, issue.1, p.48, 2008.
DOI : 10.1016/j.jcis.2008.08.055

J. Li, P. L. Ma, and B. D. Favis, The Role of the Blend Interface Type on Morphology in Cocontinuous Polymer Blends, Macromolecules, vol.35, issue.6, p.2005, 2002.
DOI : 10.1021/ma010104+

R. C. Willemse, A. Posthuma-de-boer, J. Van-dam, and A. D. Gotsis, Co-continuous morphologies in polymer blends: the influence of the interfacial tension, Polymer, vol.40, issue.4, p.827, 1999.
DOI : 10.1016/S0032-3861(98)00307-3

J. Ville, Alliages de thermoplastiques immiscibles PE/PA chargés de nanoparticules d'argile : Relations Structure-Morphologie-Rheologie, Thèse de doctorat, pp.43-4723, 2002.

H. J. Radusch, Phase morphology of dynamically vulcanized thermoplastic vulcanizates", in Micro-and Nanostructured Polymer Blend Systems: Phase Morphology and Interfaces C. Harrats, 2006.

P. Sarazin and B. D. Favis, -lactide) Materials, Biomacromolecules, vol.4, issue.6, p.1669, 2003.
DOI : 10.1021/bm030034+

M. Doi and T. Ohta, Dynamics and rheology of complex interfaces. I, The Journal of Chemical Physics, vol.19, issue.2, p.1242, 1991.
DOI : 10.1017/S0022112078002530

H. M. Lee and O. O. Park, Rheology and dynamics of immiscible polymer blends, Journal of Rheology, vol.38, issue.5, p.1405, 1994.
DOI : 10.1122/1.550551

R. A. Bibliographiques-1, R. Coran, and . Patel, Thermoplastic Elastomers Based on Dynamically vulcanised elastomer/thermoplastic blends, 2004.

M. Van-duin, Recent Developments for EPDM-Based Thermoplastic Vulcanisates, Macromolecular Symposia, vol.35, issue.1, p.11, 2006.
DOI : 10.5254/1.3547615

M. Bouchereau, Formulation des Elastomères, 1997.

M. Van-duin and A. V. Machado, EPDM-based thermoplastic vulcanisates: Crosslinking chemistry and dynamic vulcanisation along the extruder axis, Polymer Degradation and Stability, vol.90, issue.2, p.340, 2005.
DOI : 10.1016/j.polymdegradstab.2005.04.050

C. H. Joubert-16 and . Radusch, Phase morphology of dynamically vulcanized thermoplastic vulcanizates", in Micro-and Nanostructured Polymer Blend Systems: Phase Morphology and Interfaces C Nouvelle voie de réticulation et de renforcement d'un TPV de type PP/EPDM, Thèse de doctorat, 1996.

F. Goharpey, A. A. Katbab, and H. Nazockdast, Formation of Rubber Particle Agglomerates During Morphology Development in Dynamically Crosslinked EPDM/PP Thermoplastic Elastomers. Part 1: Effects of Processing and Polymer Structural Parameters, Rubber Chemistry and Technology, vol.76, issue.1, p.239, 2003.
DOI : 10.5254/1.3547737

P. A. Bhadane, N. Virgilio, B. D. Favis, M. F. Champagne, M. A. Huneault et al., Effect of dynamic vulcanization on co-continuous morphology, AIChE Journal, vol.70, issue.10, p.3411, 2006.
DOI : 10.5254/1.3538460

A. Nicolini, T. L. De-campos-rocha, and M. A. Jacobi, Dynamically vulcanized PP/EPDM blends: Influence of curing agents on the morphology evolution, Journal of Applied Polymer Science, vol.102, issue.5, p.3093, 2008.
DOI : 10.5254/1.3547862

C. F. Antunes, A. V. Machado, and M. Van-duin, Morphology development and phase inversion during dynamic vulcanisation of EPDM/PP blends, European Polymer Journal, vol.47, issue.7, p.1447, 2011.
DOI : 10.1016/j.eurpolymj.2011.04.005

F. Goharpey, R. Foudazi, H. Nazockdast, and A. A. Katbab, Determination of twin-screw extruder operational conditions for the preparation of thermoplastic vulcanizates on the basis of batch-mixer results, Journal of Applied Polymer Science, vol.32, issue.6, p.3840, 2008.
DOI : 10.1007/978-1-4684-1464-6

S. Shahbikian, P. J. Carreau, M. C. Heuzey, M. D. Ellul, J. Cheng et al., Morphology development of EPDM/PP uncross-linked/dynamically cross-linked blends, Polymer Engineering & Science, vol.36, issue.12, p.309, 2012.
DOI : 10.1002/pen.10561

A. K. Jain, A. K. Nagpal, R. Singhal, and N. K. Gupta, Effect of dynamic crosslinking on impact strength and other mechanical properties of polypropylene/ethylene-propylene-diene rubber blends, Journal of Applied Polymer Science, vol.53, issue.12, p.2089, 2000.
DOI : 10.5254/1.3535023

A. Y. Coran and R. Patel, Rubber-Thermoplastic Compositions. Part I. EPDM-Polypropylene Thermoplastic Vulcanizates, Rubber Chemistry and Technology, vol.53, issue.1, p.141, 1980.
DOI : 10.5254/1.3535023

Y. Kikuchi, T. Fukui, T. Okada, and T. Inoue, Elastic-plastic analysis of the deformation mechanism of PP-EPDM thermoplastic elastomer: Origin of rubber elasticity, Polymer Engineering and Science, vol.33, issue.14, p.1029, 1991.
DOI : 10.5254/1.3535023

L. A. Goettler, J. R. Richwine, and F. J. Wille, The Rheology and Processing of Olefin-Based Thermoplastic Vulcanizates, Rubber Chemistry and Technology, vol.55, issue.5, p.1448, 1982.
DOI : 10.5254/1.3535941

E. V. Prut, N. A. Erina, J. Karger-kocsis, and T. I. Medintseva, Effects of blend composition and dynamic vulcanization on the morphology and dynamic viscoelastic properties of PP/EPDM blends, Journal of Applied Polymer Science, vol.46, issue.2, pp.1212-84, 2005.
DOI : 10.5254/1.3538769

T. Medintseva, N. Erina, and E. Prut, Effect of oil and cured agent content on the structure and properties of thermoplastic vulcanizates, Macromolecular Symposia, vol.176, issue.1, p.49, 2001.
DOI : 10.1002/1521-3900(200112)176:1<49::AID-MASY49>3.0.CO;2-W

A. Y. Coran and R. Patel, Predicting elastic moduli of heterogeneous polymer compositions, Journal of Applied Polymer Science, vol.20, issue.11, p.3005, 1976.
DOI : 10.1002/app.1976.070201108

G. J. Jarzebski, On the effective viscosity of pseudoplastic suspensions, Rheologica Acta, vol.17, issue.3, p.280, 1981.
DOI : 10.1002/aic.690220303

P. J. Flory, Principles of Polymer Chemistry, 1953.

A. K. Geim and K. S. Novoselov, The rise of graphene, Nature Materials, vol.42, issue.3, p.183, 2007.
DOI : 10.1038/nmat1849

M. Eizenberg and J. M. Blakely, Carbon monolayer phase condensation on Ni(111), Surface Science, vol.82, issue.1, p.228, 1979.
DOI : 10.1016/0039-6028(79)90330-3

A. A. Balandin, S. Ghosh, W. Bao, I. Calizo, D. Teweldebrhan et al., Superior Thermal Conductivity of Single-Layer Graphene, Nano Letters, vol.8, issue.3, p.902, 2008.
DOI : 10.1021/nl0731872

H. Kim, A. A. Abdala, and C. W. Macosko, Graphene/Polymer Nanocomposites, Macromolecules, vol.43, issue.16, p.6515, 2010.
DOI : 10.1021/ma100572e

J. R. Potts, D. R. Dreyer, C. W. Bielawski, and R. S. Ruoff, Graphene-based polymer nanocomposites, Polymer, vol.52, issue.1, p.5, 2011.
DOI : 10.1016/j.polymer.2010.11.042

Y. Wang, X. Chen, Y. Zhong, F. Zhu, and K. P. Loh, Large area, continuous, few-layered graphene as anodes in organic photovoltaic devices, Applied Physics Letters, vol.2007, issue.6, p.63302, 2009.
DOI : 10.1016/j.carbon.2004.08.033

N. Li, Z. Wang, K. Zhao, Z. Shi, Z. Gu et al., Large scale synthesis of N-doped multi-layered graphene sheets by simple arc-discharge method, Carbon, vol.48, issue.1, p.255, 2009.
DOI : 10.1016/j.carbon.2009.09.013

P. W. Sutter, J. Flege, and E. A. Sutter, Epitaxial graphene on ruthenium, Nature Materials, vol.90, issue.5, p.406, 2008.
DOI : 10.1038/nmat2166

C. Berger, Z. M. Song, T. B. Li, X. B. Li, A. Y. Ogbazghi et al., Ultrathin Epitaxial Graphite:?? 2D Electron Gas Properties and a Route toward Graphene-based Nanoelectronics, The Journal of Physical Chemistry B, vol.108, issue.52, p.19912, 2004.
DOI : 10.1021/jp040650f

L. J. Zhi and K. Mullen, A bottom-up approach from molecular nanographenes to unconventional carbon materials, Journal of Materials Chemistry, vol.244, issue.13, p.1472, 2008.
DOI : 10.1002/adma.200702654

L. Jiao, X. Wang, G. Diankov, H. Wang, and H. Dai, Facile synthesis of high-quality graphene nanoribbons, Nature Nanotechnology, vol.9, issue.5, p.321, 2011.
DOI : 10.1038/nnano.2010.54

A. Hirsch, Unzipping Carbon Nanotubes: A Peeling Method for the Formation of Graphene Nanoribbons, Angewandte Chemie International Edition, vol.458, issue.36, p.6594, 2009.
DOI : 10.1002/anie.200902534

W. Zhang, J. Cui, C. Tao, Y. Wu, Z. Li et al., A Strategy for Producing Pure Single-Layer Graphene Sheets Based on a Confined Self-Assembly Approach, Angewandte Chemie, vol.15, issue.32, pp.5978-69, 2004.
DOI : 10.1002/ange.200902365

D. Cho, S. Lee, G. Yang, H. Fukushima, and L. T. , Dynamic Mechanical and Thermal Properties of Phenylethynyl-Terminated Polyimide Composites Reinforced With Expanded Graphite Nanoplatelets, Macromolecular Materials and Engineering, vol.36, issue.3, p.179, 2005.
DOI : 10.1081/MC-100100585

K. E. Carr, Intercalation and oxidation effects on graphite of a mixture of sulphuric and nitric acids, Carbon, vol.8, issue.2, p.155, 1970.
DOI : 10.1016/0008-6223(70)90110-7

K. Kalaitzidou, H. Fukushima, and L. T. , Mechanical properties and morphological characterization of exfoliated graphite???polypropylene nanocomposites, Composites Part A: Applied Science and Manufacturing, vol.38, issue.7, p.1675, 2007.
DOI : 10.1016/j.compositesa.2007.02.003

K. Kalaitzidou, H. Fukushima, H. Miyagawa, and L. T. , Flexural and tensile moduli of polypropylene nanocomposites and comparison of experimental data to Halpin-Tsai and Tandon-Weng models, Polymer Engineering & Science, vol.5, issue.11, p.1796, 2007.
DOI : 10.1021/bk-2002-0804

M. Mermoux, Y. Chabre, and A. Rousseau, FTIR and 13C NMR study of graphite oxide, Carbon, vol.29, issue.3, p.469, 1991.
DOI : 10.1016/0008-6223(91)90216-6

H. Y. He, J. Klinowski, M. Forster, and A. Lerf, A new structural model for graphite oxide, Chemical Physics Letters, vol.287, issue.1-2, p.53, 1998.
DOI : 10.1016/S0009-2614(98)00144-4

T. Szabo, O. Berkesi, P. Forgo, K. Josepovits, Y. Sanakis et al., Evolution of Surface Functional Groups in a Series of Progressively Oxidized Graphite Oxides, Chemistry of Materials, vol.18, issue.11, p.2740, 2006.
DOI : 10.1021/cm060258+

H. Jeong, Y. P. Lee, R. J. Lahaye, M. Park, K. H. An et al., Evidence of Graphitic AB Stacking Order of Graphite Oxides, Journal of the American Chemical Society, vol.130, issue.4, p.1362, 2008.
DOI : 10.1021/ja076473o

W. Gao, L. B. Alemany, L. Ci, and P. M. Ajayan, New insights into the structure and reduction of graphite oxide, Nature Chemistry, vol.20, issue.15, p.403, 2009.
DOI : 10.1071/CH9891007

D. W. Boukhvalov and M. I. Katsnelson, Modeling of Graphite Oxide, Journal of the American Chemical Society, vol.130, issue.32, p.10697, 2008.
DOI : 10.1021/ja8021686

J. T. Paci, T. Belytschko, and G. C. Schatz, Computational Studies of the Structure, Behavior upon Heating, and Mechanical Properties of Graphite Oxide, The Journal of Physical Chemistry C, vol.111, issue.49, p.18099, 2007.
DOI : 10.1021/jp075799g

S. Stankovich, R. D. Piner, X. Chen, N. Wu, S. B. Nguyen et al., Stable aqueous dispersions of graphitic nanoplatelets via the reduction of exfoliated graphite oxide in the presence of poly(sodium 4-styrenesulfonate), J. Mater. Chem., vol.5, issue.2, p.155, 2006.
DOI : 10.1039/b008495f

Y. Han and Y. Lu, Characterization and electrical properties of conductive polymer/colloidal graphite oxide nanocomposites, Composites Science and Technology, vol.69, issue.7-8, p.1231, 2009.
DOI : 10.1016/j.compscitech.2009.02.028

S. Niyogi, E. Bekyarova, M. E. Itkis, J. L. Mcwilliams, M. A. Hamon et al., Solution Properties of Graphite and Graphene, Journal of the American Chemical Society, vol.128, issue.24, p.7720, 2006.
DOI : 10.1021/ja060680r

S. Park, J. An, R. D. Piner, I. Jung, D. Yang et al., Aqueous Suspension and Characterization of Chemically Modified Graphene Sheets, Chemistry of Materials, vol.20, issue.21, p.6592, 2008.
DOI : 10.1021/cm801932u

X. Qi, K. Pu, X. Zhou, H. Li, B. Liu et al., Conjugated-Polyelectrolyte-Functionalized Reduced Graphene Oxide with Excellent Solubility and Stability in Polar Solvents, Small, vol.21, issue.5, p.663, 2010.
DOI : 10.1002/small.200902001

J. Che, L. Shen, and Y. Xiao, A new approach to fabricate graphene nanosheets in organic medium: combination of reduction and dispersion, Journal of Materials Chemistry, vol.45, issue.21, p.1722, 2010.
DOI : 10.1039/b922667b

J. R. Lomeda, C. D. Doyle, D. V. Kosynkin, W. Hwang, and J. M. Tour, Diazonium Functionalization of Surfactant-Wrapped Chemically Converted Graphene Sheets, Journal of the American Chemical Society, vol.130, issue.48, p.16201, 2008.
DOI : 10.1021/ja806499w

V. C. Tung, M. J. Allen, Y. Yang, and R. B. Kaner, High-throughput solution processing of large-scale graphene, Nature Nanotechnology, vol.7, issue.1, p.25, 2009.
DOI : 10.1038/nnano.2008.329

G. Williams, B. Seger, and P. V. Kamat, -Graphene Nanocomposites. UV-Assisted Photocatalytic Reduction of Graphene Oxide, ACS Nano, vol.2, issue.7, p.1487, 2008.
DOI : 10.1021/nn800251f

M. Fang, K. Wang, H. Lu, Y. Yang, and S. Nutt, Covalent polymer functionalization of graphene nanosheets and mechanical properties of composites, Journal of Materials Chemistry, vol.39, issue.38, p.7098, 2009.
DOI : 10.1007/12_063

M. J. Mcallister, J. L. Li, D. H. Adamson, H. C. Schniepp, A. A. Abdala et al., Single Sheet Functionalized Graphene by Oxidation and Thermal Expansion of Graphite, Prud'homme, and I.A. Aksay, p.4396, 2007.
DOI : 10.1021/cm0630800

S. Brunauer, P. H. Emmett, and E. Teller, Adsorption of Gases in Multimolecular Layers, Journal of the American Chemical Society, vol.60, issue.2, p.309, 1938.
DOI : 10.1021/ja01269a023

T. Ramanathan, A. A. Abdala, S. Stankovich, D. A. Dikin, M. Herrera-alonso et al., Functionalized graphene sheets for polymer nanocomposites, Nature Nanotechnology, vol.42, issue.6, p.327, 2008.
DOI : 10.1016/S0032-3861(02)00022-8

M. Alexandre and P. Dubois, Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials, Materials Science and Engineering: R: Reports, vol.28, issue.1-2, p.1, 2000.
DOI : 10.1016/S0927-796X(00)00012-7

Y. Matsuo, K. Tahara, and Y. Sugie, Structure and thermal properties of poly(ethylene oxide)-intercalated graphite oxide, Carbon, vol.35, issue.1, p.113, 1997.
DOI : 10.1016/S0008-6223(96)00123-6

X. Zhao, Q. Zhang, D. Chen, and P. Lu, Enhanced Mechanical Properties of Graphene-Based Poly(vinyl alcohol) Composites, Macromolecules, vol.43, issue.5, p.2357, 2010.
DOI : 10.1021/ma902862u

H. Kim, Y. Miura, and C. W. Macosko, Graphene/Polyurethane Nanocomposites for Improved Gas Barrier and Electrical Conductivity, Chemistry of Materials, vol.22, issue.11, p.3441, 2010.
DOI : 10.1021/cm100477v

A. L. Higginbotham, J. R. Lomeda, A. B. Morgan, and J. M. Tour, Graphite Oxide Flame-Retardant Polymer Nanocomposites, ACS Applied Materials & Interfaces, vol.1, issue.10, p.2256, 2009.
DOI : 10.1021/am900419m

P. Liu, K. Gong, P. Xiao, and M. Xiao, Preparation and characterization of poly(vinyl acetate)-intercalated graphite oxide nanocomposite, Journal of Materials Chemistry, vol.10, issue.4, p.933, 2000.
DOI : 10.1039/a908179h

J. Y. Jang, M. S. Kim, H. M. Jeong, and C. M. Shin, Graphite oxide/poly(methyl methacrylate) nanocomposites prepared by a novel method utilizing macroazoinitiator, Composites Science and Technology, vol.69, issue.2, p.186, 2009.
DOI : 10.1016/j.compscitech.2008.09.039

Y. R. Lee, A. V. Raghu, H. M. Jeong, and B. K. Kim, Properties of Waterborne Polyurethane/Functionalized Graphene Sheet Nanocomposites Prepared by an in situ Method, Macromolecular Chemistry and Physics, vol.111, issue.15, p.1247, 2009.
DOI : 10.1007/BF03219022

R. Verdejo, F. Barroso-bujans, M. A. Rodriguez-perez, J. Antonio-de-saja, and M. A. Lopez-manchado, Functionalized graphene sheet filled silicone foam nanocomposites, Journal of Materials Chemistry, vol.25, issue.19, p.2221, 2008.
DOI : 10.1039/b716109c

H. J. Salavagione, G. Martínez, and G. Ellis, Recent Advances in the Covalent Modification of Graphene With Polymers, Macromolecular Rapid Communications, vol.85, issue.22, p.1771, 2011.
DOI : 10.1063/1.1794370

S. Kim, I. Do, and L. T. , Multifunctional xGnP/LLDPE Nanocomposites Prepared by Solution Compounding Using Various Screw Rotating Systems, Macromolecular Materials and Engineering, vol.39, issue.3, p.196, 2009.
DOI : 10.1002/mame.200800319

X. Jiang and L. T. , Multifunctional high-density polyethylene nanocomposites produced by incorporation of exfoliated graphene nanoplatelets 2: Crystallization, thermal and electrical properties, Polymer Composites, vol.145, issue.4, p.636, 2012.
DOI : 10.1016/j.synthmet.2004.05.007

S. Kim, I. Do, and L. T. , Thermal stability and dynamic mechanical behavior of exfoliated graphite nanoplatelets-LLDPE nanocomposites, Polymer Composites, vol.38, issue.5, p.755, 2010.
DOI : 10.1002/pc.20781

S. Kim and L. T. , High latent heat storage and high thermal conductive phase change materials using exfoliated graphite nanoplatelets, Solar Energy Materials and Solar Cells, vol.93, issue.1, p.136, 2009.
DOI : 10.1016/j.solmat.2008.09.010

S. Kim, J. Seo, and L. T. , Improvement of electric conductivity of LLDPE based nanocomposite by paraffin coating on exfoliated graphite nanoplatelets, Composites Part A: Applied Science and Manufacturing, vol.41, issue.5, p.581, 2010.
DOI : 10.1016/j.compositesa.2009.05.002

K. Kalaitzidou, H. Fukushima, P. Askeland, and L. T. , The nucleating effect of exfoliated graphite nanoplatelets and their influence on the crystal structure and electrical conductivity of polypropylene nanocomposites, Journal of Materials Science, vol.399, issue.8, p.2895, 2008.
DOI : 10.1007/s10853-007-1876-3

W. Kai, Y. Hirota, L. Hua, and Y. Inoue, Thermal and mechanical properties of a poly(??-caprolactone)/graphite oxide composite, Journal of Applied Polymer Science, vol.8, issue.3, p.1395, 2008.
DOI : 10.1081/MC-100101420

X. Fu and S. Qutubuddin, Polymer???clay nanocomposites: exfoliation of organophilic montmorillonite nanolayers in polystyrene, Polymer, vol.42, issue.2, p.807, 2001.
DOI : 10.1016/S0032-3861(00)00385-2

M. J. Solomon, A. S. Almusallam, K. F. Seefeldt, A. Somwangthanaroj, and P. Varadan, Rheology of Polypropylene/Clay Hybrid Materials, Macromolecules, vol.34, issue.6, p.1864, 2001.
DOI : 10.1021/ma001122e

H. Kanai, R. C. Navarrete, C. W. Macosko, and L. E. Scriven, Fragile networks and rheology of concentrated suspensions, Rheologica Acta, vol.21, issue.8, p.333, 1992.
DOI : 10.1007/BF00418330

A. Celzard, E. Mcrae, C. Deleuze, M. Dufort, G. Furdin et al., Critical concentration in percolating systems containing a high-aspect-ratio filler, Physical Review B, vol.35, issue.10, p.6209, 1996.
DOI : 10.1103/PhysRevB.35.3284

V. K. Shante and S. Kirkpatrick, Advances in Physics, p.325, 1971.

C. J. Rueb and C. F. Zukoski, Viscoelastic properties of colloidal gels, Journal of Rheology, vol.41, issue.2, p.197, 1997.
DOI : 10.1122/1.550812

W. Shih, W. Y. Shih, S. Kim, J. Liu, and I. A. Aksay, Scaling behavior of the elastic properties of colloidal gels, Physical Review A, vol.36, issue.8, p.4772, 1990.
DOI : 10.1103/PhysRevA.36.1803

S. B. Kharchenko, J. F. Douglas, J. Obrzut, E. A. Grulke, and K. B. Migler, Flow-induced properties of nanotube-filled polymer materials, Nature Materials, vol.25, issue.8, pp.564-594, 1997.
DOI : 10.1122/1.549645

Y. A. Balogun and R. C. Buchanan, Enhanced percolative properties from partial solubility dispersion of filler phase in conducting polymer composites (CPCs), Composites Science and Technology, vol.70, issue.6, p.892, 2010.
DOI : 10.1016/j.compscitech.2010.01.009

E. J. Garboczi, K. A. Snyder, J. F. Douglas, and M. F. Thorpe, Geometrical percolation threshold of overlapping ellipsoids, Physical Review E, vol.19, issue.1, p.819, 1995.
DOI : 10.1088/0305-4470/19/9/013

S. H. Munson-mcgee, Estimation of the critical concentration in an anisotropic percolation network, Physical Review B, vol.51, issue.4, p.3331, 1991.
DOI : 10.1111/j.1749-6632.1949.tb27296.x

I. Balberg, N. Binenbaum, and N. Wagner, Percolation Thresholds in the Three-Dimensional Sticks System, Physical Review Letters, vol.51, issue.17, p.1465, 1984.
DOI : 10.1111/j.1749-6632.1949.tb27296.x

M. A. Rafiee, J. Rafiee, Z. Wang, H. Song, Z. Yu et al., Enhanced Mechanical Properties of Nanocomposites at Low Graphene Content, ACS Nano, vol.3, issue.12, p.3884, 2009.
DOI : 10.1021/nn9010472

S. Kim and L. T. , Comparison of Exfoliated Graphite Nanoplatelets (xGnP) and CNTs for Reinforcement of EVA Nanocomposites Fabricated by Solution Compounding Method and Three Screw Rotating Systems, Journal of Adhesion Science and Technology, vol.89, issue.12, p.1623, 2009.
DOI : 10.1002/app.12307

J. Liang, Y. Huang, L. Zhang, Y. Wang, Y. Ma et al., Molecular-Level Dispersion of Graphene into Poly(vinyl alcohol) and Effective Reinforcement of their Nanocomposites, Advanced Functional Materials, vol.515, issue.14, p.2297, 2009.
DOI : 10.1002/adfm.200801776

X. Yang, Y. Tu, L. Li, S. Shang, and X. Tao, Well-Dispersed Chitosan/Graphene Oxide Nanocomposites, ACS Applied Materials & Interfaces, vol.2, issue.6, p.1707, 2010.
DOI : 10.1021/am100222m

H. Fukushima, L. Drzal, B. P. Rook, and M. J. Rich, Thermal conductivity of exfoliated graphite nanocomposites, Journal of Thermal Analysis and Calorimetry, vol.28, issue.1, p.235, 2006.
DOI : 10.2109/jcersj.109.S7

W. Lertwimolnun and B. Vergnes, Effect of processing conditions on the formation of polypropylene/organoclay nanocomposites in a twin screw extruder, Polymer Engineering & Science, vol.45, issue.653, p.314, 2006.
DOI : 10.3139/217.1718
URL : https://hal.archives-ouvertes.fr/hal-00514114

L. Wang, J. Hong, and G. Chen, Comparison study of graphite nanosheets and carbon black as fillers for high density polyethylene, Polymer Engineering & Science, vol.42, issue.11, p.2176, 2010.
DOI : 10.1143/JJAP.44.4171

E. H. Kerner and P. , The Elastic and Thermo-elastic Properties of Composite Media, Proceedings of the Physical Society. Section B, vol.69, issue.8, p.808, 1956.
DOI : 10.1088/0370-1301/69/8/305

I. M. Krieger and T. J. Dougherty, A Mechanism for Non???Newtonian Flow in Suspensions of Rigid Spheres, Transactions of the Society of Rheology, vol.3, issue.1, p.137, 1959.
DOI : 10.1122/1.548848