H. Mughrabi, Chapter 60 Long-Range internal stresses in deformed single-phase materials: The composite model and its consequences, Dislocations in solids, vol.11, pp.343-411, 2002.
DOI : 10.1016/S1572-4859(02)80011-0

A. J. Wilkinson, G. Meaden, and D. J. Dingley, High-resolution elastic strain measurement from electron backscatter diffraction patterns: New levels of sensitivity, Ultramicroscopy, vol.106, issue.4-5, pp.307-313, 2006.
DOI : 10.1016/j.ultramic.2005.10.001

C. Maurice, J. H. Driver, and R. Fortunier, On solving the orientation gradient dependency of high angular resolution EBSD, Ultramicroscopy, vol.113, pp.171-181, 2012.
DOI : 10.1016/j.ultramic.2011.10.013

URL : https://hal.archives-ouvertes.fr/emse-00830371

J. P. Hirth, Lothe : Theory of dislocations, 1982.

D. Hull and D. J. Bacon, Introduction to dislocations, 1984.

S. Karato, Deformation of earth materials: an introduction to the rheology of solid earth, 2012.
DOI : 10.1017/CBO9780511804892

D. V. Louzguine-luzgin, L. V. Louzguina-luzgina, and A. Y. , Mechanical Properties and Deformation Behavior of Bulk Metallic Glasses, Metals, vol.366, issue.368, pp.1-22, 2012.
DOI : 10.1016/j.actamat.2008.07.033

G. S. Law, Crystal-plasticity fundamentals, 2009.

D. Kuhlmann-wilsdorf and N. Hansen, Geometrically necessary, incidental and subgrain boundaries. Scripta metallurgica et materialia, pp.1557-1562, 1991.
DOI : 10.1016/0956-716x(91)90451-6

URL : http://orbit.dtu.dk/en/publications/geometrically-necessary-incidental-and-subgrain-boundaries(cf9b205b-7eb2-4301-ace0-87c5294de240).html

B. Bay, N. Hansen, D. Hughes, and D. , Kuhlmann-Wilsdorf : Overview no. 96 evolution of fcc deformation structures in polyslip. Acta metallurgica et materialia, pp.205-219, 1992.

U. Kocks, A statistical theory of flow stress and work-hardening, Philosophical Magazine, vol.43, issue.123, pp.541-566, 1966.
DOI : 10.1080/14786435708243823

H. Gao and Y. , Geometrically necessary dislocation and size-dependent plasticity, Scripta Materialia, vol.48, issue.2, pp.113-118, 2003.
DOI : 10.1016/S1359-6462(02)00329-9

W. Pantleon, Disorientations in dislocation structures, Materials Science and Engineering: A, vol.400, issue.401, pp.118-124, 2005.
DOI : 10.1016/j.msea.2005.03.064

X. Huang, Grain Orientation Effect on Microstructure in Tensile Strained Copper, Scripta Materialia, vol.38, issue.11, pp.1697-1703, 1998.
DOI : 10.1016/S1359-6462(98)00051-7

J. A. Wert, X. Huang, G. Winther, W. Pantleon, and H. F. Poulsen, Revealing deformation microstructures, Materials Today, vol.10, issue.9, pp.24-32, 2007.
DOI : 10.1016/S1369-7021(07)70206-7

URL : https://doi.org/10.1016/s1369-7021(07)70206-7

G. Winther, X. Huang, A. Godfrey, and N. Hansen, Critical comparison of dislocation boundary alignment studied by TEM and EBSD: technical issues and theoretical consequences, Acta Materialia, vol.52, issue.15, pp.524437-4446, 2004.
DOI : 10.1016/j.actamat.2004.05.050

G. Winther, Slip systems, lattice rotations and dislocation boundaries, Materials Science and Engineering: A, vol.483, issue.484, pp.40-46, 2008.
DOI : 10.1016/j.msea.2006.08.138

URL : http://orbit.dtu.dk/en/publications/slip-systems-lattice-rotations-and-dislocation-boundaries(3c9bdd1d-5fbd-4cf0-9f47-dd44a8a10724).html

G. Winther, Slip patterns and preferred dislocation boundary planes, Acta Materialia, vol.51, issue.2, pp.417-429, 2003.
DOI : 10.1016/S1359-6454(02)00423-8

G. Winther, L. Margulies, S. Schmidt, and H. Poulsen, Lattice rotations of individual bulk grains Part II: correlation with initial orientation and model comparison, Acta Materialia, vol.52, issue.10, pp.522863-2872, 2004.
DOI : 10.1016/j.actamat.2004.02.045

R. J. Mccabe, A. Misra, and T. E. Mitchell, Experimentally determined content of a geometrically necessary dislocation boundary in copper, Acta Materialia, vol.52, issue.3, pp.705-714, 2004.
DOI : 10.1016/j.actamat.2003.10.006

Q. Liu and N. Hansen, Geometrically necessary boundaries and incidental dislocation boundaries formed during cold deformation. Scripta metallurgica et materialia, pp.1289-1295, 1995.
DOI : 10.1016/0956-716x(94)00019-e

C. Hong, X. Huang, and G. Winther, Dislocation content of geometrically necessary boundaries aligned with slip planes in rolled aluminium, Philosophical Magazine, vol.42, issue.23, pp.3118-3141, 2013.
DOI : 10.1007/s11661-007-9421-1

J. Gubicza, X-ray line profile analysis in materials science, 2014.
DOI : 10.4018/978-1-4666-5852-3

G. Zilahi and T. Ungár, A common theory of line broadening and rocking curves, Journal of Applied Crystallography, vol.41, issue.389, pp.418-430, 2015.
DOI : 10.1016/0956-7151(93)90084-6

M. Wilkens, X-ray line broadening and mean square strains of straight dislocations in elastically anisotropic crystals of cubic symmetry, Physica Status Solidi (a), vol.12, issue.1, pp.1-6, 1987.
DOI : 10.1002/pssa.2211040137

M. Wilkens, Diffraction line broadening of crystals containing small-angle boundaries, Journal of Applied Crystallography, vol.12, issue.1, pp.119-125, 1979.
DOI : 10.1107/S0021889879011900

A. Borbély, X-ray line profiles analysis of plastically deformed metals, Comptes Rendus Physique, vol.13, issue.3, pp.293-306, 2012.
DOI : 10.1016/j.crhy.2011.12.004

H. Mughrabi and B. Obst, Misorientations and geometrically necessary dislocations in deformed copper crystals: A microstructural analysis of X-ray rocking curves, Zeitschrift f??r Metallkunde, vol.96, issue.7, pp.688-697, 2005.
DOI : 10.3139/146.101088

P. Hirsch, R. Horne, and M. , Whelan : LXVIII. Direct observations of the arrangement and motion of dislocations in aluminium, btitle, 1956.

R. I. Barabash and P. , X-ray scattering by crystals with local lattice rotation fields, Journal of Applied Crystallography, vol.32, issue.6, pp.1050-1059, 1999.
DOI : 10.1107/S0021889899010237

URL : http://journals.iucr.org/j/issues/1999/06/00/os0027/os0027.pdf

W. Pantleon, On the distribution function of disorientations in dislocation cell structures, Scripta Materialia, vol.35, issue.4, pp.511-515, 1996.
DOI : 10.1016/1359-6462(96)00164-9

L. Priester, Grain boundaries: from theory to engineering, 2012.
DOI : 10.1007/978-94-007-4969-6

M. Martinez-hernandez, H. Kirchner, A. Korner, A. George, and J. Michel, Dislocations at grain boundaries in deformed silicon, Philosophical Magazine A, vol.75, issue.5, pp.641-658, 1987.
DOI : 10.1007/BF02644170

A. Beaudoin-jr and H. Mecking, Development of localized orientation gradients in fcc polycrystals, Philosophical Magazine A, vol.14, issue.6, pp.1503-1517, 1996.
DOI : 10.1016/0956-7151(95)90164-7

D. Raabe, Z. Zhao, and W. Mao, On the dependence of in-grain subdivision and deformation texture of aluminum on grain interaction, Acta Materialia, vol.50, issue.17, pp.4379-4394, 2002.
DOI : 10.1016/S1359-6454(02)00276-8

D. Hughes, Q. Liu, D. Chrzan, and N. Hansen, Scaling of microstructural parameters: Misorientations of deformation induced boundaries, Acta Materialia, vol.45, issue.1, pp.105-112, 1997.
DOI : 10.1016/S1359-6454(96)00153-X

S. Zaefferer, New developments of computer-aided crystallographic analysis in transmission electron microscopy, Journal of Applied Crystallography, vol.33, issue.1, pp.10-25, 2000.
DOI : 10.1107/S0021889899010894

A. Akef and J. Driver, Orientation splitting of cube-oriented face-centred cubic crystals in plane strain compression, Materials Science and Engineering: A, vol.132, pp.245-255, 1991.
DOI : 10.1016/0921-5093(91)90381-V

F. Basson and J. Driver, Deformation banding mechanisms during plane strain compression of cube-oriented f.c.c. crystals, Acta Materialia, vol.48, issue.9, pp.2101-2115, 2000.
DOI : 10.1016/S1359-6454(00)00042-2

D. Hughes and N. Hansen, High angle boundaries formed by grain subdivision mechanisms, Acta Materialia, vol.45, issue.9, pp.3871-3886, 1997.
DOI : 10.1016/S1359-6454(97)00027-X

URL : http://orbit.dtu.dk/en/publications/high-angle-boundaries-formed-by-grain-subdivision-mechanisms(ffe4bd79-353e-4510-a9b4-e16fc48e920e).html

S. Skjervold and N. Ryum, Characterization of local texture in a moderately deformed polycrystalline alsi-alloy. Acta metallurgica et materialia, pp.3159-3176, 1995.

L. S. Tóth, Y. Estrin, R. Lapovok, and C. Gu, A model of grain fragmentation based on lattice curvature, Acta Materialia, vol.58, issue.5, pp.1782-1794, 2010.
DOI : 10.1016/j.actamat.2009.11.020

N. Gueninchault, H. Proudhon, and W. Ludwig, Nanox: a miniature mechanical stress rig designed for near-field X-ray diffraction imaging techniques, Journal of Synchrotron Radiation, vol.92, issue.389, p.2016
DOI : 10.1107/S1600577516013850/ie5166sup2.avi

URL : https://hal.archives-ouvertes.fr/hal-01392783

G. Sachs, Plasticity problems in metals, Transactions of the Faraday Society, vol.24, pp.84-92, 1928.
DOI : 10.1039/tf9282400084

G. J. Taylor, Analysis of plastic strain in a cubic crystal, Journal of the Institue of Metals, vol.62, p.307, 1938.

J. Oddershede, J. Wright, A. Beaudoin, and G. Winther, Deformationinduced orientation spread in individual bulk grains of an interstitial-free steel

H. Poulsen, L. Margulies, S. Schmidt, and G. Winther, Lattice rotations of individual bulk grains, Acta Materialia, vol.51, issue.13, pp.3821-3830, 2003.
DOI : 10.1016/S1359-6454(03)00206-4

A. Suter and . Borbely, Comparison between diffraction contrast tomography and high-energy diffraction microscopy on a slightly deformed aluminium alloy, IUCrJ, vol.3, issue.1, p.2016
URL : https://hal.archives-ouvertes.fr/emse-01505553

L. Nervo, A. King, J. P. Wright, W. Ludwig, P. Reischig et al., Comparison between a near-field and a far-field indexing approach for characterization of a polycrystalline sample volume containing more than 1500 grains, Journal of Applied Crystallography, vol.61, issue.4, pp.1402-1416, 2014.
DOI : 10.1016/j.scriptamat.2009.07.027

L. Nervo, A. King, J. P. Wright, W. Ludwig, P. Reischig et al., Comparison between a near-field and a farfield indexing approach for characterization of a polycrystalline sample volume containing more than 1500 grains, Journal of Applied Crystallography, 2014.

R. Quey, Suivi de microtextures dans l'aluminium en grande déformation à chaud, Thèse de doctorat, Ecole Nationale Supérieure des Mines de Saint- Etienne, 2009.

G. A. Chahine, M. I. Richard, R. A. Homs-regojo, T. N. Tran-caliste, D. Carbone et al., Schülli : Imaging of strain and lattice orientation by quick scanning X-ray microscopy combined with three-dimensional reciprocal space mapping, Journal of Applied Crystallography, 2014.

E. Filippelli, G. Chahine, and A. Borbély, Evaluation of intragranular strain and average dislocation density in single grains of a polycrystal using K-map scanning, Journal of Applied Crystallography, vol.48, issue.5, pp.1814-1817, 2016.
DOI : 10.1107/S1600576716013224/ks5527sup1.pdf

URL : https://hal.archives-ouvertes.fr/emse-01501508

R. Lebensohn and C. Tomé, A self-consistent viscoplastic model: prediction of rolling textures of anisotropic polycrystals, Materials Science and Engineering: A, vol.175, issue.1-2, pp.71-82, 1994.
DOI : 10.1016/0921-5093(94)91047-2

C. Tomé, R. A. Lebensohn, and U. Kocks, A model for texture development dominated by deformation twinning: application to zirconium alloys. Acta metallurgica et materialia, pp.392667-2680, 1991.

W. R. Busing and H. A. Levy, Angle calculations for 3- and 4-circle X-ray and neutron diffractometers, Acta Crystallographica, vol.22, issue.4, pp.457-464, 1967.
DOI : 10.1107/S0365110X67000970

URL : http://journals.iucr.org/q/issues/1967/04/00/a05492/a05492.pdf

H. Mughrabi and B. Obst, Misorientations and geometrically necessary dislocations in deformed copper crystals: A microstructural analysis of X-ray rocking curves, Zeitschrift f??r Metallkunde, vol.96, issue.7, pp.688-697, 2005.
DOI : 10.3139/146.101088

G. Winther, L. Margulies, S. Schmidt, and H. F. Poulsen, Lattice rotations of individual bulk grains Part II: correlation with initial orientation and model comparison, Acta Materialia, vol.52, issue.10, pp.522863-2872, 2004.
DOI : 10.1016/j.actamat.2004.02.045

H. F. Poulsen, L. Margulies, S. Schmidt, and G. Winther, Lattice rotations of individual bulk grains, Acta Materialia, vol.51, issue.13, pp.513821-3830, 2003.
DOI : 10.1016/S1359-6454(03)00206-4

R. Pokharel, J. Lind, S. F. Li, P. Kenesei, R. A. Lebensohn et al., In-situ observation of bulk 3D grain evolution during plastic deformation in polycrystalline Cu, International Journal of Plasticity, vol.67, pp.217-234, 2015.
DOI : 10.1016/j.ijplas.2014.10.013

M. Kamaya, A. J. Wilkinson, and J. M. Titchmarsh, Quantification of plastic strain of stainless steel and nickel alloy by electron backscatter diffraction, Acta Materialia, vol.54, issue.2
DOI : 10.1016/j.actamat.2005.08.046

M. Kamaya, Measurement of local plastic strain distribution of stainless steel by electron backscatter diffraction, Materials Characterization, vol.60, issue.2, pp.125-132, 2009.
DOI : 10.1016/j.matchar.2008.07.010

R. Suter, D. Hennessy, C. Xiao, and U. Lienert, Forward modeling method for microstructure reconstruction using x-ray diffraction microscopy: Single-crystal verification, Review of Scientific Instruments, vol.77, issue.12, p.123905, 2006.
DOI : 10.1103/PhysRevA.45.8894

G. Daveau, Interaction dislocations-joints de grains en déformation plastique monotone: étude expérimentale et modélisations numériques, Thèse de doctorat, 2012.

J. C. Glez and J. Driver, Orientation distribution analysis in deformed grains, Journal of Applied Crystallography, vol.34, issue.3, pp.280-288, 2001.
DOI : 10.1107/S0021889801003077

URL : http://journals.iucr.org/j/issues/2001/03/00/vi0144/vi0144.pdf

M. Yoo and H. , Interaction of slip with grain boundary and its role in cavity nucleation, Acta Metallurgica, vol.34, issue.12, pp.2381-2390, 1986.
DOI : 10.1016/0001-6160(86)90141-0

A. Borbely, C. Maurice, and J. H. Driver, Rotation axis analysis of deformed crystals by X-rays and electrons, Journal of Applied Crystallography, vol.41, issue.4, pp.747-753, 2008.
DOI : 10.1107/S0021889808015768

URL : https://hal.archives-ouvertes.fr/emse-00475670

T. Ungt-'ar, H. Mughrabi, and M. Wilkt, An X-Ray line-broadening study of dislocations near the surface and in the bulk of deformed copper single crystals, Acta Metallurgica, vol.30, issue.10, pp.1861-1867, 1982.
DOI : 10.1016/0001-6160(82)90026-8

J. Jiang, T. B. Britton, and A. J. Wilkinson, Mapping type III intragranular residual stress distributions in deformed copper polycrystals, Acta Materialia, vol.61, issue.15, pp.615895-5904, 2013.
DOI : 10.1016/j.actamat.2013.06.038

I. Groma, X-ray line broadening due to an inhomogeneous dislocation distribution, Physical Review B, vol.1, issue.13, p.7535, 1998.
DOI : 10.1107/S002188986800498X

A. Borbély and I. Groma, Variance method for the evaluation of particle size and dislocation density from x-ray Bragg peaks, Applied Physics Letters, vol.235, issue.12, pp.1772-1774, 2001.
DOI : 10.1107/S0021889879011900

T. Ungár, I. Groma, and M. Wilkens, Asymmetric X-ray line broadening of plastically deformed crystals. II. Evaluation procedure and application to [001]-Cu crystals, Journal of Applied Crystallography, vol.22, issue.1, pp.26-34, 1989.
DOI : 10.1107/S0021889888009720

I. Groma and G. Monnet, Analysis of asymmetric broadening of X-ray diffraction peak profiles caused by randomly distributed polarized dislocation dipoles and dislocation walls, Journal of Applied Crystallography, vol.35, issue.5, pp.589-593, 2002.
DOI : 10.1107/S0021889802010695

. Vaughan, Burgers vector population, dislocation types and dislocation densities in single grains extracted from a polycrystalline commercial-purity ti specimen by x-ray line-profile analysis, Scripta Materialia, vol.63, issue.1, pp.69-72, 2010.

M. Wilkens, Theoretical aspects of kinematical x-ray diffraction profiles from crystals containing dislocation distributions(fourier transform of x ray diffraction line profiles from crystals with dislocations) NBS Fundamental Aspects of Dislocation Theory, 1970.

M. Miller and P. Dawson, Understanding local deformation in metallic polycrystals using high energy X-rays and finite elements, Current Opinion in Solid State and Materials Science, vol.18, issue.5, pp.286-299, 2014.
DOI : 10.1016/j.cossms.2014.09.001

J. Jiang, T. Britton, and A. Wilkinson, Evolution of dislocation density distributions in copper during tensile deformation, Acta Materialia, vol.61, issue.19, pp.61-7227, 2013.
DOI : 10.1016/j.actamat.2013.08.027