B. Belletti, Evaluation of the interaction effects in coupled thin walled prestressed concrete roof elements, European Journal of Environmental and Civil Engineering, vol.13, issue.6, pp.745-764, 2009.
DOI : 10.1061/(ASCE)0733-9445(2001)127:12(1412)

D. Caillerie, Thin elastic and periodic plates, Mathematical Methods in the Applied Sciences, vol.2, issue.18, pp.159-191, 1984.
DOI : 10.1007/BFb0091528

P. G. Ciarlet and P. Destuynder, Justification of the two-dimensional linear plate model, Journal de Mécanique, vol.18, pp.315-344, 1979.

A. Cimetière, G. Geymonat, L. Dret, H. Raoult, A. Tutek et al., Asymptotic theory and analysis for displacements and stress distribution in nonlinear elastic straight slender rods, Journal of Elasticity, vol.18, issue.18, pp.111-161, 1988.
DOI : 10.1007/978-3-642-46015-9

A. Cimetière, A. Hamdouni, and O. Millet, Le modèle linéaire usuel de plaque déduit de l'élasticité non linéaire tridimensionnelle. Comptes Rendus de l'Academie Sciences, pp.159-162, 1998.

P. Destuynder, A classification of thin shell theories, Acta Applicandae Mathematicae, vol.XIV, issue.1, pp.15-63, 1985.
DOI : 10.1007/978-94-009-9541-3

K. Elamri, A. Hamdouni, and O. Millet, Le mod??le de Novozhilov-Donnell lin??aire d??duit de l'??lasticit?? tridimensionnelle non lin??aire, Comptes Rendus de l'Academie Sciences, pp.1285-1290, 1999.
DOI : 10.1016/S1287-4620(99)90003-0

B. Fouré and N. E. Hannachi, Rigidité de torsion des poutres en béton armé fissurées en flexion. Revue Française de Génie Civil, pp.115-154, 1999.

G. Geymonat, Sur la commutativité des passages à la limite en théorie asymptotique des poutres composites. Comptes Rendus de l'Academie Sciences, pp.225-228, 1987.

A. Gjelsvik, The Theory of Thin-Walled Bars, Journal of Applied Mechanics, vol.49, issue.2, 1981.
DOI : 10.1115/1.3162198

A. L. Goldenveizer, Derivation of an approximate theory of shells by means of asymptotic integration of the equations of the theory of elasticity, Prikladnoi Matematiki Mekhanika, pp.593-608, 1963.
DOI : 10.1016/0021-8928(63)90177-1

L. Grillet, A. Hamdouni, and O. Millet, An asymptotic non-linear model for thin-walled rods. Comptes Rendus de l'Academie Sciences, pp.123-128, 2004.

L. Grillet, A. Hamdouni, and O. Millet, Justification of the kinematic assumptions for thin-walled rods with shallow profile, Comptes Rendus de l'Academie Sciences, pp.493-489, 2005.
DOI : 10.1016/j.crme.2004.12.007

URL : https://hal.archives-ouvertes.fr/hal-00312216

A. Hamdouni and O. Millet, Classification of thin shell models deduced from the nonlinear three-dimensional elasticity. Part I: the shallow shells, Archives of Mechanics, vol.55, pp.135-175, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00312225

A. Hamdouni and O. Millet, Classification of thin shell models deduced from the nonlinear three-dimensional elasticity. Part II: the strongly curved shells, Archives of Mechanics, vol.55, pp.177-219, 2003.
URL : https://hal.archives-ouvertes.fr/hal-00312225

A. Hamdouni and O. Millet, An asymptotic non-linear model for thin-walled rods with strongly curved open cross-section, International Journal of Non-Linear Mechanics, vol.41, issue.3, pp.396-416, 2006.
DOI : 10.1016/j.ijnonlinmec.2005.08.005

A. Hamdouni and O. Millet, An asymptotic linear thin-walled rod model coupling twist and bending, International Applied Mechanics, vol.46, issue.8, pp.1072-1092, 2011.
DOI : 10.1016/j.tws.2007.08.011

T. Lewinski, Effective models of composite periodic plates???I. Asymptotic solution, International Journal of Solids and Structures, vol.27, issue.9, pp.1155-1172, 1991.
DOI : 10.1016/0020-7683(91)90116-W

K. Madani, Étude des structures élastiques élancées à rayon de courbure faiblement variable: Une classification de modèles asymptotiques. Comptes Rendus de l'Academie Sciences, pp.605-608, 1998.

J. J. Marigo, H. Ghidouche, and Z. Sedkaoui, Des poutres flexibles aux fils extensibles: Une hierarchie de modèles asymptotiques. Comptes Rendus de l'Academie Sciences, pp.79-84, 1998.
DOI : 10.1016/s1251-8069(99)80067-0

J. J. Marigo and K. Madani, Quelques modèles d'anneaux élastiques suivant les types de chargement. Comptes Rendus de l'Academie Sciences, pp.805-810, 1998.
DOI : 10.1016/s1251-8069(99)80031-3

O. Millet, A. Cimetière, and A. Hamdouni, An asymptotic elastic???plastic plate model for moderate displacements and strong strain hardening, European Journal of Mechanics - A/Solids, vol.22, issue.3, pp.369-384, 2003.
DOI : 10.1016/S0997-7538(03)00044-5

URL : https://hal.archives-ouvertes.fr/hal-00139581

O. Millet, A. Hamdouni, and A. Cimetière, Justification du mod??le bidimensionnel lin??aire de plaque par d??veloppement asymptotique de l'??quation de Navier, Comptes Rendus de l'Academie Sciences, pp.289-292, 1997.
DOI : 10.1016/S1251-8069(99)80036-0

O. Hamdouni, A. Cimetière, and A. , Justification du modèle bidimensionnel non linéaire de plaque par développement asymptotique des équations d'équilibre. Comptes Rendus de l'Academie Sciences, pp.349-354, 1997.

O. Millet, A. Hamdouni, and A. Cimetière, Construction d'un modèle eulérien de plaques en grands déplacements par méthode asymptotique. Comptes Rendus de l'Academie Sciences, pp.257-261, 1997.
DOI : 10.1016/s1251-8069(97)88389-3

O. Millet, A. Hamdouni, and A. Cimetière, Dimensional analysis and asymptotic expansions of the equilibrium equations in nonlinear elasticity. Part I: The membrane model. Archives of Mechanics, pp.853-873, 1998.
URL : https://hal.archives-ouvertes.fr/hal-00312263

O. Millet, A. Hamdouni, and A. Cimetière, Dimensional analysis and asymptotic expansions of the equilibrium equations in nonlinear elasticity. Part II: The ''Von Karman Model, Archives of Mechanics, pp.975-1001, 1998.
URL : https://hal.archives-ouvertes.fr/hal-00312263

O. Millet, A. Hamdouni, and A. Cimetière, A classification of thin plate models by asymptotic expansion of non-linear three-dimensional equilibrium equations, International Journal of Non-Linear Mechanics, vol.36, issue.1, pp.165-186, 2001.
DOI : 10.1016/S0020-7462(00)00005-6

URL : https://hal.archives-ouvertes.fr/hal-00312262

O. Millet, A. Hamdouni, and A. Cimetière, An Eulerian approach of non-linear membrane shell theory, International Journal of Non-Linear Mechanics, vol.38, issue.9, pp.1403-1420, 2003.
DOI : 10.1016/S0020-7462(02)00079-3

A. Rigolot, Déplacements finis et petites déformations des poutres droites: Analyse asymptotique de la solution à grande distance des bases, Journal Mécanique Appliquée, vol.1, pp.175-206, 1977.

J. M. Rodriguez and J. M. Viaño, Asymptotic analysis of Poisson's equation in a thin domain Application to thin-walled elastic beams, Asymptotic methods for elastic structures, pp.181-193, 1995.

J. M. Rodriguez and J. M. Viaño, Asymptotic general bending and torsion models for thin-walled elastic beams, Asymptotic methods for elastic structures, pp.255-274, 1995.

J. M. Rodriguez and J. M. Viaño, Asymptotic derivation of a general linear model for thin-walled elastic rods, Computer Methods in Applied Mechanics and Engineering, vol.147, issue.3-4, pp.287-321, 1997.
DOI : 10.1016/S0045-7825(97)00019-4

E. Sanchez-palencia, Statique et dynamique des coques minces, I ? Cas de flexion pure non inhibée. Comptes Rendus de l'Academie Sciences, pp.411-417, 1989.

E. Sanchez-palencia, Statique et dynamique des coques minces, I ? Cas de flexion pure inhibée ? Approximation membranaire. Comptes Rendus de l'Academie Sciences, pp.531-537, 1989.

E. Sanchez-palencia, Passage à la limite de l'élasticité tridimensionnelle à la théorie asymptotique des coques minces. Comptes Rendus de l'Academie Sciences, pp.909-916, 1990.

J. Sanchez-hubert and E. Sanchez-palencia, Statics of curved rods on account of torsion and flexion, European Journal of Mechanics - A/Solids, vol.18, issue.3, pp.365-390, 1999.
DOI : 10.1016/S0997-7538(99)00132-1

L. Trabucho and J. M. Viaño, Existence and characterization of higher-order terms in an asymptotic expansion method for linearized elastic beams, Asymptotic Analysis, vol.2, pp.223-255, 1989.

L. Trabucho and J. M. Viaño, A new approach of Timoshenko's beam theory by asymptotic expansion method, ESAIM: Mathematical Modelling and Numerical Analysis, vol.24, issue.5, pp.651-680, 1990.
DOI : 10.1007/BFb0060528

L. Trabucho and J. M. Viaño, Mathematical modelling of rods, Handbook of numerical analysis, pp.487-974, 1996.
DOI : 10.1016/S1570-8659(96)80006-8

V. Z. Vlassov, E. N. Bathe, and . Dvorkin, Pièces longues en voiles minces A formulation of general shell elements ? the use of mixed interpolation of tensorial components, Paris: Eyrolles. References Int. J. Numer. Methods Eng, vol.22, issue.1, pp.697-722, 1962.

K. J. Bathe and E. N. Dvorkin, A four-node plate bending element based on Mindlin/Reissner plate theory and a mixed interpolation, International Journal for Numerical Methods in Engineering, vol.1, issue.2, pp.367-383, 1985.
DOI : 10.1680/iicep.1967.8440

K. J. Bathe, A. Iosilevich, and D. Chapelle, An evaluation of the MITC shell elements, Computers & Structures, vol.75, issue.1, pp.1-30, 2000.
DOI : 10.1016/S0045-7949(99)00214-X

URL : https://hal.archives-ouvertes.fr/hal-00839267

P. S. Lee and K. J. Bathe, On the asymptotic behavior of shell structures and the evaluation in finite element solutions, Computers & Structures, vol.80, issue.3-4, pp.235-255, 2002.
DOI : 10.1016/S0045-7949(02)00009-3

D. Briassoulis, Asymptotic deformation modes of benchmark problems suitable for evaluating shell elements, Computer Methods in Applied Mechanics and Engineering, vol.194, issue.21-24, pp.2385-2405, 2005.
DOI : 10.1016/j.cma.2004.07.038

J. L. Batoz, K. J. Bathe, and L. W. Ho, A study of three-node triangular plate bending elements, International Journal for Numerical Methods in Engineering, vol.31, issue.12, pp.15-1771, 1980.
DOI : 10.1002/nme.1620151205

J. L. Batoz and M. B. Tahar, Evaluation of a new quadrilateral thin plate bending element, International Journal for Numerical Methods in Engineering, vol.37, issue.11, pp.1655-1678, 1982.
DOI : 10.1680/iicep.1967.8440

J. L. Batoz and P. Lardeur, A discrete shear triangular nine D.O.F. element for the analysis of thick to very thin plates, International Journal for Numerical Methods in Engineering, vol.19, issue.3, pp.533-560, 1989.
DOI : 10.1115/1.3643934

P. Lardeur, Développmentet Evaluation de Deux Nouveaux Eléments Finis de Plaques et Coques Composites avec Influences du Cisaillement Transverse Thèse de Doctorat, 1990.

P. G. Bergan and M. K. Nygard, Finite elements with increased freedom in choosing shape functions, International Journal for Numerical Methods in Engineering, vol.12, issue.4, pp.643-663, 1984.
DOI : 10.1016/B978-0-12-253250-4.50008-7

J. L. Batoz, I. Katili, and A. On, On a simple triangular reissner/mindlin plate element based on incompatible modes and discrete constraints, International Journal for Numerical Methods in Engineering, vol.14, issue.8, pp.1603-1632, 1992.
DOI : 10.1016/B978-0-12-253250-4.50008-7

I. Katili, A new discrete Kirchhoff-Mindlin element based on Mindlin-Reissner plate theory and assumed shear strain fields???part I: An extended DKT element for thick-plate bending analysis, International Journal for Numerical Methods in Engineering, vol.3, issue.11, pp.1859-1883, 1993.
DOI : 10.1115/1.3643934

I. Katili, A new discrete Kirchhoff-Mindlin element based on Mindlin-Reissner plate theory and assumed shear strain fields???part II: An extended DKQ element for thick-plate bending analysis, International Journal for Numerical Methods in Engineering, vol.22, issue.11, pp.1885-1908, 1993.
DOI : 10.1115/1.3643934

E. Reissner, The effect of transverse shear deformation on the bending of elastic plates, J. Appl. Mech. Eng. ASME, vol.12, pp.69-77, 1943.

R. D. Mindlin, Influence of rotator inertia and shear on flexural motion of isotropic elastic plates, J. Appl. Mech, vol.18, pp.31-38, 1951.

R. Ayad, A. Rigolot, and N. Talbi, An improved three???node hybrid???mixed element for Mindlin/Reissner plates, International Journal for Numerical Methods in Engineering, vol.28, issue.8, pp.919-942, 2001.
DOI : 10.1002/nme.1620280112

R. Ayad and A. Rigolot, An improved four-node hybrid-mixed element based upon Mindlin's plate theory, International Journal for Numerical Methods in Engineering, vol.35, issue.6, pp.705-731, 2002.
DOI : 10.2514/3.60853

R. Ayad, N. Talbi, and T. Ghomari, Modified discrete Mindlin hypothesises for laminated composite structures, Composites Science and Technology, vol.69, issue.1, pp.125-128, 2009.
DOI : 10.1016/j.compscitech.2007.10.038

URL : https://hal.archives-ouvertes.fr/hal-00563492

E. Onate, O. C. Zienkiewicz, B. Suarez, and R. L. Taylor, A general methodology for deriving shear constrained Reissner-Mindlin plate elements, International Journal for Numerical Methods in Engineering, vol.3, issue.2, pp.345-367, 1992.
DOI : 10.1002/nme.1620330208

E. Onate and J. Castro, Derivation of plate based on assumed shear strain fields, New Advances in Computational Structural Mechanics, pp.237-288, 1992.

J. Aalto, From Kirchhoff to Mindlin plate elements, Communications in Applied Numerical Methods, vol.19, issue.2, pp.231-241, 1988.
DOI : 10.1115/1.3157679

P. Khosravi, R. Ganesan, and R. Sedaghati, An efficient facet shell element for corotational nonlinear analysis of thin and moderately thick laminated composite structures, Computers & Structures, vol.86, issue.9, pp.850-858, 2008.
DOI : 10.1016/j.compstruc.2007.04.010

P. M. Naghdi, On the theory of thin elastic shells, Quarterly of Applied Mathematics, vol.14, issue.4, pp.369-380, 1957.
DOI : 10.1090/qam/84284

P. M. Naghdi, Foundations of elastic shells theory, Progress in Solid Mechanics IV, 1963.

P. M. Naghdi, On a Variational Theorem in Elasticity and Its Application to Shell Theory, Journal of Applied Mechanics, vol.31, issue.4, pp.1964647-653
DOI : 10.1115/1.3629726

P. M. Naghdi, The theory of shells and plate, in: Flugge, Handbuch der Physik VI, A2, 1972.

I. Katili, Formulation et évaluation des Nouveaux éléments finis pour l 0 analyse linéaire des plaques et coques de forme quelconque Thèse Doctorat, 1993.

I. Katili, Rancang Bangun Elemen Unggulan dan Pengembangannya pada Analisa Struktur Pelat dan Cangkang dengan Metode Elemen Hingga, Internal Repport, 1995.

K. Washizu, Variational methods in elasticity and plasticity, 1982.

R. H. Mac and . Neal, A simple quadrilateral shell element, Comput. Struct, vol.8, pp.175-183, 1978.

R. H. Mac and . Neal, Derivation of element stiffness matrices by assumed strain distributions, Nuclear Eng. Des, vol.70, pp.3-12, 1982.

R. H. Mac and . Neal, The evolution of lower order plate and shell elements in Msc/ Nastran, FEM for plate and shell structures, pp.85-127, 1986.

R. M. Neal and R. L. Harder, A proposed standard set of problems to test finite element accuracy, Finite Elem. Anal. Des, vol.1, pp.3-20, 1985.

A. C. Scordelis and K. S. Lo, Computer analysis of cylindrical shells, J. Am. Concr. Inst, pp.61-539, 1969.

G. M. Lindberg, M. D. Olson, and G. R. , Cowper New developments in finite element analysis of shells, Quarterly Bulletin of the Division of Mechanical Engineering and the National Aeronautical Establishment National Research Council of Canada, vol.4, 1969.

W. Flügge, Stresses in Shells, 1960.

K. Bhaskar and T. K. Varadan, Analytical Solution for a Pinched Laminated Cylinder, Journal of Applied Mechanics, vol.57, issue.4, pp.1082-1083, 1990.
DOI : 10.1115/1.2897632

C. A. Brebia and J. J. Connor, Fundamentals of Finite Element Techniques for Structural Engineers, 1974.

L. S. Srinivas and A. K. Rao, Flexure of Thick Rectangular Plates, Journal of Applied Mechanics, vol.40, issue.1, pp.298-299, 1973.
DOI : 10.1115/1.3422947

L. S. Morley, Skew Plates and Structures References [1] Katili I. A new discrete Kirchhoff?Mindlin element based on Mindlin?Reissner plate theory and assumed shear strain fields-part I: an extended DKT element for thick-plate bending analysis, Int J Numer Meth Eng, vol.36, pp.1859-83, 1963.

I. Katili, A new discrete Kirchhoff-Mindlin element based on Mindlin-Reissner plate theory and assumed shear strain fields???part II: An extended DKQ element for thick-plate bending analysis, International Journal for Numerical Methods in Engineering, vol.22, issue.11, pp.1885-908, 1993.
DOI : 10.1115/1.3643934

J. Batoz, K. Bathe, and L. Ho, A study of three-node triangular plate bending elements, International Journal for Numerical Methods in Engineering, vol.31, issue.12, pp.1771-812, 1980.
DOI : 10.1002/nme.1620151205

J. Batoz, B. Tahar, and M. , Evaluation of a new quadrilateral thin plate bending element, International Journal for Numerical Methods in Engineering, vol.37, issue.11, pp.1655-78, 1982.
DOI : 10.1680/iicep.1967.8440

E. Reissner, The effect of transverse shear deformation on the bending of elastic plates, J Appl Mech Eng ASME, vol.12, pp.69-77, 1943.

R. Mindlin, Influence of rotator inertia and shear on flexural motion of isotropic elastic plates, J Appl Mech, vol.18, pp.31-39, 1951.

I. Katili, J. Batoz, I. Maknun, A. Hamdouni, and O. Millet, The development of DKMQ plate bending element for thick to thin shell analysis based on the Naghdi/Reissner/Mindlin shell theory, Finite Elements in Analysis and Design, vol.100, pp.12-27, 2015.
DOI : 10.1016/j.finel.2015.02.005

R. Ayad, N. Talbi, and T. Ghomari, Modified discrete Mindlin hypothesises for laminated composite structures, Composites Science and Technology, vol.69, issue.1, pp.125-133, 2009.
DOI : 10.1016/j.compscitech.2007.10.038

URL : https://hal.archives-ouvertes.fr/hal-00563492

P. Khosravi, R. Ganesan, and R. Sedaghati, An efficient facet shell element for corotational nonlinear analysis of thin and moderately thick laminated composite structures, Computers & Structures, vol.86, issue.9, pp.850-858, 2008.
DOI : 10.1016/j.compstruc.2007.04.010

S. Botella, E. Onate, and J. Canet, A layer-wise triangle for analysis of laminated composite plates and shells, Computers & Structures, vol.70, issue.6, pp.635-681, 1999.
DOI : 10.1016/S0045-7949(98)00165-5

N. Pagano, Exact Solutions for Rectangular Bidirectional Composites and Sandwich Plates, Journal of Composite Materials, vol.7, issue.1, pp.20-34, 1970.
DOI : 10.2514/3.5463

N. Pagano and S. Hatfield, Elastic Behavior of Multilayered Bidirectional Composites, AIAA Journal, vol.87, issue.7, pp.931-934, 1972.
DOI : 10.1177/002199837100500410

S. Srinivas, A refined analysis of composite laminates, Journal of Sound and Vibration, vol.30, issue.4, pp.495-507, 1973.
DOI : 10.1016/S0022-460X(73)80170-1

D. Chapelle and K. Bathe, The finite element analysis of shells ? fundamentals, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00839738

J. Hiller and K. Bathe, Measuring convergence of mixed finite element discretizations: an application to shell structures, Computers & Structures, vol.81, issue.8-11, pp.639-54, 2003.
DOI : 10.1016/S0045-7949(03)00010-5

P. Lee and K. Bathe, Development of MITC isotropic triangular shell finite elements, Computers & Structures, vol.82, issue.11-12, pp.945-62, 2004.
DOI : 10.1016/j.compstruc.2004.02.004

P. Lee, H. Noh, and K. Bathe, Insight into 3-node triangular shell finite elements: the effects of element isotropy and mesh patterns, Computers & Structures, vol.85, issue.7-8, pp.404-422, 2007.
DOI : 10.1016/j.compstruc.2006.10.006

D. Kim and K. Bathe, A triangular six-node shell element, Computers & Structures, vol.87, issue.23-24, pp.1451-60, 2009.
DOI : 10.1016/j.compstruc.2009.05.002

K. Bathe, P. Lee, and J. Hiller, Towards improving the MITC9 shell element, Computers & Structures, vol.81, issue.8-11, pp.477-89, 2003.
DOI : 10.1016/S0045-7949(02)00483-2

P. Lee and K. Bathe, The quadratic MITC plate and MITC shell elements in plate bending, Advances in Engineering Software, vol.41, issue.5, pp.712-740, 2010.
DOI : 10.1016/j.advengsoft.2009.12.011

K. Bathe and P. Lee, Measuring the convergence behavior of shell analysis schemes, Computers & Structures, vol.89, issue.3-4, pp.285-301, 2011.
DOI : 10.1016/j.compstruc.2010.09.007

J. Batoz and G. Dhatt, Modélisation des structures par éléments finis, Poutres et Plaques, vol.2, 1990.

E. Oñate, Structural analysis with the finite element method. Beams, plates and shells, 2012.

K. Bathe and E. Dvorkin, A four-node plate bending element based on Mindlin/Reissner plate theory and a mixed interpolation, International Journal for Numerical Methods in Engineering, vol.1, issue.2, pp.367-83, 1985.
DOI : 10.1680/iicep.1967.8440

B. Vlassov, Pièces longues en voiles minces, Paris: Editions Eyrolles, 1962.

C. S. Gurujee and K. R. Shah, A computer program for thin walled frame analysis Advances in Engineering Software, pp.58-70, 1989.

A. Proki?, Computer program for determination of geometrical properties of thin-walled beams with open profile Advances in Engineering Software, pp.109-119, 1999.

E. N. Dvorkin, D. Celentano, A. Cuitino, and G. Gioia, A Vlasov beam element, Computers & Structures, vol.33, issue.1, pp.187-96, 1989.
DOI : 10.1016/0045-7949(89)90140-5

D. Krajcinovic, Matrix force analysis of thin-walled structures, J. Struct. Eng. ASCE, vol.96, issue.1, pp.107-127, 1970.

H. Shakourzadeh, Y. Q. Guo, and J. L. Batoz, A torsion bending element for thin-walled beams with open and closed cross sections, Computers & Structures, vol.55, issue.6, pp.1045-1054, 1995.
DOI : 10.1016/0045-7949(94)00509-2

S. U. Benscoter, A theory of torsion bending for multicell beams, J. appl. Mech, vol.21, pp.25-34, 1954.

R. Dziewolski, Torsion non uniforme des poutres à parois minces et à profils composés d'éléments fermés et ouverts, Construct. metall, vol.1, 1964.

A. Gjelsvik, The Theory of Thin-Walled Bars, Journal of Applied Mechanics, vol.49, issue.2, 1981.
DOI : 10.1115/1.3162198

V. De-ville-de and . Goyet, L'analyse statique non linéaire par la méthode des éléments finis des structures spatiales formées de poutres à section non symétrique, Thèse orientée a l'université de Liège, 1988.

A. Proki? and D. Luki?, Dynamic behavior of braced thin-walled beams, International Applied Mechanics, vol.74, issue.6, pp.129-143, 2007.
DOI : 10.1680/iicep.1978.2808

R. E. Erkmen and M. Mohareb, Torsion analysis of thin-walled beams including shear deformation effects. Thin-Walled Structures, pp.1096-1108, 2006.

R. Pavazza, Torsion of thin-walled beams of open cross-section with influence of shear, International Journal of Mechanical Sciences, vol.47, issue.7, pp.1099-1122, 2005.
DOI : 10.1016/j.ijmecsci.2005.02.007

M. Taktak, F. Dammak, S. Abid, and M. Haddar, A mixed-hybrid finite element for three-dimensional isotropic helical beam analysis, International Journal of Mechanical Sciences, vol.47, issue.2, pp.209-229, 2005.
DOI : 10.1016/j.ijmecsci.2004.12.010

I. Katili, J. L. Batoz, I. J. Maknun, A. Hamdouni, and O. Millet, The development of DKMQ plate bending element for thick to thin shell analysis based on the Naghdi/Reissner/Mindlin shell theory, Finite Elements in Analysis and Design, vol.100, pp.12-27, 2015.
DOI : 10.1016/j.finel.2015.02.005

I. Katili, A new discrete Kirchhoff-Mindlin element based on Mindlin-Reissner plate theory and assumed shear strain fields???part II: An extended DKQ element for thick-plate bending analysis, International Journal for Numerical Methods in Engineering, vol.22, issue.11, pp.1885-1908, 1993.
DOI : 10.1115/1.3643934

R. L. Taylor, FEAP -A Finite Element Analysis Program: User Manual, Theoretical Manual, Dept. of Civil Engineering, University of California at Berkeley, California 94720- 1710, 2012.

F. Béchet, O. Millet, and E. Sanchez-palencia, Limit behavior of Koiter model for long cylindrical shells and Vlassov model, International Journal of Solids and Structures, vol.47, issue.3-4, pp.365-373, 2010.
DOI : 10.1016/j.ijsolstr.2009.09.024

R. D. Mindlin, Influence of rotator inertia and shear on flexural motion of isotropic elastic plates, J.Appl.Mech, vol.18, pp.31-38, 1951.

P. M. Naghdi, On the theory of thin elastic shells, Quarterly of Applied Mathematics, vol.14, issue.4, pp.369-380, 1957.
DOI : 10.1090/qam/84284

P. M. Naghdi, Foundations of elastic shells theory, Progress in Solid Mechanics, 1963.

P. M. Naghdi, On a Variational Theorem in Elasticity and Its Application to Shell Theory, Journal of Applied Mechanics, vol.31, issue.4, pp.31-35, 1964.
DOI : 10.1115/1.3629726

P. M. Naghdi, The theory of shells and plate. Handbuch der Physik, 1972.

E. Reissner, The effect of transverse shear deformation on the bending of elastic plates, Journal of Applied. Mech. in Engineering ASME, vol.12, pp.69-77, 1943.

J. L. Batoz and G. Dhatt, Modélisation des Structures par Eléments Finis, 1992.

A. Hamdouni and O. Millet, An asymptotic linear thin-walled rod model coupling twist and bending, International Applied Mechanics, vol.46, issue.8, pp.1072-1092, 2011.
DOI : 10.1016/j.tws.2007.08.011

A. Hamdouni and O. Millet, An asymptotic non-linear model for thin-walled rods with strongly curved open cross-section, International Journal of Non-Linear Mechanics, vol.41, issue.3, pp.396-416, 2006.
DOI : 10.1016/j.ijnonlinmec.2005.08.005

A. Hamdouni, I. Katili, I. J. Maknun, and O. Millet, Analytical and experimental analysis of an asymptotic thin-walled beam model, European Journal of Environmental and Civil Engineering, vol.5, issue.1, pp.1-18, 2013.
DOI : 10.1051/m2an/1990240506511

L. Grillet, A. Hamdouni, and O. Millet, An asymptotic non-linear model for thin-walled rods, Comptes Rendus M??canique, vol.332, issue.2
DOI : 10.1016/j.crme.2003.10.015

L. Grillet, A. Hamdouni, and O. Millet, Justification of the kinematic assumptions for thin-walled rods with shallow profile. Comptes Rendus de l'Academie Sciences, pp.493-489, 2005.
URL : https://hal.archives-ouvertes.fr/hal-00312216

U. Shrinivasa and K. M. Rao, A set of pathological tests to validate new finite elements, Sadhana, vol.26, issue.6, pp.549-590, 2001.

. Bibliographie1-]-g-alfano, . Auricchio, E. Rosati, and . Sacco, MITC finite elements for laminated composite plates, International Journal for Numerical Methods in Engineering, vol.28, issue.3, pp.707-738, 2001.
DOI : 10.1002/nme.1620280806

K. Bathe, Finite Element Procedures in Engineering Analysis, Journal of Pressure Vessel Technology, vol.106, issue.4, 1996.
DOI : 10.1115/1.3264375

K. Bathe, The inf???sup condition and its evaluation for mixed finite element methods, Computers & Structures, vol.79, issue.2, pp.243-252, 2001.
DOI : 10.1016/S0045-7949(00)00123-1

K. Bathe and E. Dvorkin, A four-node plate bending element based on Mindlin/Reissner plate theory and a mixed interpolation, International Journal for Numerical Methods in Engineering, vol.1, issue.2, pp.367-383, 1985.
DOI : 10.1680/iicep.1967.8440

K. Bathe and E. Dvorkin, A formulation of general shell elements???the use of mixed interpolation of tensorial components, International Journal for Numerical Methods in Engineering, vol.49, issue.3, pp.697-722, 1986.
DOI : 10.1007/978-3-642-88291-3

K. Bathe, D. Iosilevich, and . Chapelle, An evaluation of the MITC shell elements, Computers & Structures, vol.75, issue.1, pp.1-30, 2000.
DOI : 10.1016/S0045-7949(99)00214-X

URL : https://hal.archives-ouvertes.fr/hal-00839267

K. Bathe, D. Iosilevich, and . Chapelle, An inf-sup test for shell finite elements, Computers & Structures, vol.75, issue.5, pp.439-456, 2000.
DOI : 10.1016/S0045-7949(99)00213-8

URL : https://hal.archives-ouvertes.fr/hal-00839276

K. Bathe and P. Lee, Measuring the convergence behavior of shell analysis schemes, Computers & Structures, vol.89, issue.3-4, pp.285-301, 2011.
DOI : 10.1016/j.compstruc.2010.09.007

K. Bathe, J. Lee, and . Hiller, Towards improving the MITC9 shell element, Computers & Structures, vol.81, issue.8-11, pp.477-489, 2003.
DOI : 10.1016/S0045-7949(02)00483-2

J. Batoz and M. Tahar, Evaluation of a new quadrilateral thin plate bending element, International Journal for Numerical Methods in Engineering, vol.37, issue.11, pp.1655-1678, 1982.
DOI : 10.1680/iicep.1967.8440

J. Batoz and G. Dhatt, Modélisation des structures par eléments finis Poutres et plaques, Editions Hermes, vol.2, 1990.
DOI : 10.1002/nme.1620372312

J. Batoz and G. Dhatt, Modélisation des structures par éléments finis, Editions Hermes, vol.3, 1992.

F. Béchet, E. Millet, and . Sanchez-palencia, Limit behavior of Koiter model for long cylindrical shells and Vlassov model, International Journal of Solids and Structures, vol.47, issue.3-4, pp.365-373, 2010.
DOI : 10.1016/j.ijsolstr.2009.09.024

M. Bernadou, Finite eelemnts methods for thin shells, Lectures Notes in Math, 1996.

K. Bhaskar and T. Varadan, Analytical Solution for a Pinched Laminated Cylinder, Journal of Applied Mechanics, vol.57, issue.4, pp.1082-1084, 1990.
DOI : 10.1115/1.2897632

B. Boroomand, O. Ghaffarian, and . Zienkiewicz, On application of two superconvergent recovery procedures to plate problems, International Journal for Numerical Methods in Engineering, vol.69, issue.10, pp.1644-1673, 2004.
DOI : 10.1108/02644409410799399

B. Boroomand and O. Zienkiewicz, An improved REP recovery and the effectivity robustness test, International Journal for Numerical Methods in Engineering, vol.3, issue.17, pp.3247-3277, 1997.
DOI : 10.1002/(SICI)1097-0207(19970915)40:17<3247::AID-NME211>3.0.CO;2-Z

B. Boroomand and O. Zienkiewicz, RECOVERY BY EQUILIBRIUM IN PATCHES (REP), International Journal for Numerical Methods in Engineering, vol.98, issue.1, pp.137-164, 1997.
DOI : 10.1002/(SICI)1097-0207(19970115)40:1<137::AID-NME57>3.0.CO;2-5

C. Brebbia and J. Connor, Fundamentals of finite element techniques for structural engineers, 1974.

J. Breuneval, Schéma d'une théorie générale des coques minces élastiques, Journal de mécanique, vol.10, 1971.

J. Breuneval, Géométrie des déformations des surfaces et équations de la mécanique des coques, Thèse d'état, 1972.

J. Breuneval, Principe des travaux virtuels et équations des coques, Journal de Mécanique, vol.12, pp.137-149, 1973.

F. Brezzi, M. Kj-bathe, and . Fortin, Mixed-interpolated elements for Reissner-Mindlin plates, International Journal for Numerical Methods in Engineering, vol.47, issue.8, pp.1787-1801, 1989.
DOI : 10.1016/B978-0-12-747255-3.50042-3

URL : http://web.mit.edu/kjb/www/Publications_Prior_to_1998/Mixed-Interpolated_Elements_for_Reissner_Mindlin_Plates.pdf

G. Castellazzi and P. Krysl, Displacement-based finite elements with nodal integration for Reissner-Mindlin plates, International Journal for Numerical Methods in Engineering, vol.24, issue.9, pp.135-162, 2009.
DOI : 10.1007/978-3-662-04823-8

G. Castellazzi, I. Krysl, and . Bartoli, A displacement-based finite element formulation for the analysis of laminated composite plates, Composite Structures, vol.95, pp.518-527, 2013.
DOI : 10.1016/j.compstruct.2012.08.029

D. Chapelle and K. Bathe, The inf-sup test, Computers & Structures, vol.47, issue.4-5, pp.537-545, 1993.
DOI : 10.1016/0045-7949(93)90340-J

URL : https://hal.archives-ouvertes.fr/hal-00839728

D. Chapelle and K. Bathe, Fundamental considerations for the finite element analysis of shell structures, Computers & Structures, vol.66, issue.1, pp.19-36, 1998.
DOI : 10.1016/S0045-7949(97)00078-3

URL : https://hal.archives-ouvertes.fr/hal-00839732

D. Chapelle and K. Bathe, The finite element analysis of shells -fundamentals, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00839738

D. Chapelle, M. Oliveira, and . Bucalem, MITC elements for a classical shell model, Computers & Structures, vol.81, issue.8-11, pp.523-533, 2003.
DOI : 10.1016/S0045-7949(02)00408-X

URL : https://hal.archives-ouvertes.fr/hal-00839227

P. Destuynder, Modélisation des coques minces élastiques, 1990.

E. Dvorkin and K. Bathe, A continuum mechanics based four???node shell element for general non???linear analysis, Engineering Computations, vol.1, issue.1, pp.77-88, 1984.
DOI : 10.1115/1.3161951

W. Flugge, Stresses in shells, 1960.

L. Grillet, C. Hamdouni, and . Allery, Modèle asymptotique linéaire de poutres voiles fortement courbés. Comptes Rendus de l'Academie Sciences, pp.123-128, 2000.
DOI : 10.1016/s1620-7742(00)01237-x

A. Hamdouni, . Katili, O. Ij-maknun, and . Millet, Analytical and experimental analysis of an asymptotic thin-walled beam model, European Journal of Environmental and Civil Engineering, vol.5, issue.1, pp.1-18, 2013.
DOI : 10.1051/m2an/1990240506511

A. Hamdouni and O. Millet, An asymptotic non-linear model for thin-walled rods with strongly curved open cross-section, International Journal of Non-Linear Mechanics, vol.41, issue.3, pp.396-416, 2006.
DOI : 10.1016/j.ijnonlinmec.2005.08.005

A. Hamdouni and O. Millet, An asymptotic linear thin-walled rod model coupling twist and bending, International Applied Mechanics, vol.46, issue.8, pp.1072-1092, 2011.
DOI : 10.1016/j.tws.2007.08.011

J. Hiller and K. Bathe, Measuring convergence of mixed finite element discretizations: an application to shell structures, Computers & Structures, vol.81, issue.8-11, pp.639-654, 2003.
DOI : 10.1016/S0045-7949(03)00010-5

T. Hughes, M. Cohen, and . Haroun, Reduced and selective integration techniques in the finite element analysis of plates, Nuclear Engineering and Design, vol.46, issue.1, pp.203-222, 1978.
DOI : 10.1016/0029-5493(78)90184-X

T. Hughes and T. Tezduyar, Finite Elements Based Upon Mindlin Plate Theory With Particular Reference to the Four-Node Bilinear Isoparametric Element, Journal of Applied Mechanics, vol.48, issue.3, pp.587-596, 1981.
DOI : 10.1115/1.3157679

A. Iosilevich, F. Kj-bathe, and . Brezzi, On evaluating the inf-sup condition for plate bending elements, International Journal for Numerical Methods in Engineering, vol.38, issue.2, pp.3639-3663, 1997.
DOI : 10.1007/978-1-4612-3172-1

I. Katili, Formulation et évaluation des nouveaux éléments finis pour l'analyse linéaire des plaques et coques de forme quelconque, Thèse Doctorat, 1993.

I. Katili, A new discrete Kirchhoff-Mindlin element based on Mindlin-Reissner plate theory and assumed shear strain fields???part I: An extended DKT element for thick-plate bending analysis, International Journal for Numerical Methods in Engineering, vol.3, issue.11, pp.1859-1883, 1993.
DOI : 10.1115/1.3643934

I. Katili, A new discrete Kirchhoff-Mindlin element based on Mindlin-Reissner plate theory and assumed shear strain fields???part II: An extended DKQ element for thick-plate bending analysis, International Journal for Numerical Methods in Engineering, vol.22, issue.11, pp.1885-1908, 1993.
DOI : 10.1115/1.3643934

I. Katili, Metode elemen hingga untuk pelat lentur, 2004.

I. Katili, . Ij-maknun, O. Hamdouni, and . Millet, Application of DKMQ element for composite plate bending structures, Composite Structures, vol.132, pp.166-174, 2015.
DOI : 10.1016/j.compstruct.2015.04.051

D. Kim and K. Bathe, A triangular six-node shell element, Computers & Structures, vol.87, issue.23-24, pp.1451-1460, 2009.
DOI : 10.1016/j.compstruc.2009.05.002

G. Kirchhoff, ??ber das Gleichgewicht und die Bewegung einer elastischen Scheibe., Journal f??r die reine und angewandte Mathematik (Crelles Journal), vol.1850, issue.40, pp.51-58, 1950.
DOI : 10.1515/crll.1850.40.51

W. Koiter, A consistent first approximation in the general theory of thin elastic shells, Proc. I.U.T.A.M. Symp. on the Theory of Thin Elastic Shells, pp.12-32, 1960.

W. Koiter, On the nonlinear theory of thin elastic shell, Proc. Kon. Ned.Ak. Wet, pp.1-54, 1966.

P. Lee and K. Bathe, Development of MITC isotropic triangular shell finite elements, Computers & Structures, vol.82, issue.11-12, pp.945-962, 2004.
DOI : 10.1016/j.compstruc.2004.02.004

P. Lee and K. Bathe, The quadratique MITC plate and MITC shell elements in plate bending Advances in Engineering Software, pp.712-728, 2010.

P. Lee, K. Noh, and . Bathe, Insight into 3-node triangular shell finite elements: the effects of element isotropy and mesh patterns, Computers & Structures, vol.85, issue.7-8, pp.404-418, 2007.
DOI : 10.1016/j.compstruc.2006.10.006

G. Lindberg, G. Olson, and . Cowper, New developments in finite element analysis of shells, National Research Council of Canada, 1969.

J. Lions, Perturbations singulières dans les problèmes aux limites et en contrôle optimal, 1973.
DOI : 10.1007/BFb0060528

R. Macneal and R. Harder, A proposed standard set of problems to test finite element accuracy. Finite Element in Analysis and Design, pp.3-20, 1985.

R. Macneal, A simple quadrilateral shell element, Computers & Structures, vol.8, issue.2, pp.175-183, 1978.
DOI : 10.1016/0045-7949(78)90020-2

R. Macneal, Derivation of element stiffness matrices by assumed strain distributions, Nuclear Engineering and Design, vol.70, issue.1, pp.3-12, 1982.
DOI : 10.1016/0029-5493(82)90262-X

R. Macneal, The evolution of lower order plate and shell elements in msc/nastran, in FEM for plate and shell structures, pp.85-127, 1986.

D. Malkus and T. Hughes, Mixed finite element methods ??? Reduced and selective integration techniques: A unification of concepts, Computer Methods in Applied Mechanics and Engineering, vol.15, issue.1, pp.63-81, 1978.
DOI : 10.1016/0045-7825(78)90005-1

R. Mindlin, Influence of Rotatory Inertia and Shear on Flexural Motions of Isotropic, Elastic Plates, Journal of Applied Mech, vol.18, pp.31-38, 1951.
DOI : 10.1007/978-1-4613-8865-4_29

R. Mindlin and H. Deresiewicz, Thimoshenko's shear coefficient for flexural vibrations of beams, Proc.2nd Us National Congress of Appl. Mech, pp.175-178, 1954.

L. Morley, Skew plates and structures. Pergamon press, 1963.

M. Naghdi, The theory of shells and plates. Flugge's Handbuch der Physik, 1972.

P. Naghdi, On the theory of thin elastic shells, Quarterly of Applied Mathematics, vol.14, issue.4, pp.369-380, 1957.
DOI : 10.1090/qam/84284

P. Naghdi, Foundations of elastic shells theory Progress in Solid Mechanics, 1963.

P. Naghdi, On a Variational Theorem in Elasticity and Its Application to Shell Theory, Journal of Applied Mechanics, vol.31, issue.4, pp.31647-653, 1964.
DOI : 10.1115/1.3629726

P. Naghdi, The theory of shells and plate. Handbuch der Physik, 1972.

V. Novozhilov, The theory of thin shells, 1959.
DOI : 10.1007/978-94-017-5352-4

N. Pagano, Exact Solutions for Rectangular Bidirectional Composites and Sandwich Plates, Journal of Composite Materials, vol.7, issue.1, pp.20-34, 1970.
DOI : 10.2514/3.5463

N. Pagano and S. Hatfield, Elastic Behavior of Multilayered Bidirectional Composites, AIAA Journal, vol.87, issue.7, pp.931-933, 1972.
DOI : 10.1177/002199837100500410

S. Pawsey and R. Clough, Improved numerical integration of thick shell finite elements, International Journal for Numerical Methods in Engineering, vol.3, issue.4, pp.575-586, 1971.
DOI : 10.1002/nme.1620030411

D. Payen and K. Bathe, The use of nodal point forces to improve element stresses. Computers and Structures, pp.485-495, 2011.

D. Payen and K. Bathe, A stress improvement procedure. Computers and Structures, pp.311-326, 2012.

A. Razzaque, Program for triangular bending elements with derivative smoothing, International Journal for Numerical Methods in Engineering, vol.6, issue.3, pp.333-345, 1973.
DOI : 10.2514/8.8850

J. Reddy, A generalization of two-dimensional theories of laminated composite plates, Communications in Applied Numerical Methods, vol.44, issue.3, pp.173-180, 1987.
DOI : 10.1115/1.3424154

J. Reddy, On refined theories of composite laminates, Meccanica, vol.30, issue.4, pp.230-238, 1990.
DOI : 10.1007/BF01559685

E. Reissner, The effect of transverse shear deformation on the bending of elastic plates, Journal of Applied Mech. in Engineering ASME, vol.12, pp.69-77, 1945.

E. Reissner, On bending of elastic plates, Quarterly of Applied Mathematics, vol.5, issue.1, pp.55-68, 1947.
DOI : 10.1090/qam/20440

A. Rodriguez and J. Viano, Asymptotic analysis of poisson's equation in a thin domain. application to the thin-walled elastic beams Asymptotic Methods for Elastic Structures, pp.181-193, 1995.

A. Rodriguez and J. Viano, Mathematical modeling of rods, Handbook of Numerical Analysis, pp.487-974, 1996.

A. Rodriguez and J. Viano, Asymptotic of a general linear model for thinwalled elastic rods, Comput. Methods Appl. Mech. Eng, vol.47, pp.287-321, 1997.

P. Salerno and M. Goldberg, Effect of shear deformation on the bending of rectangular plates. Transaction of the ASME, pp.54-58, 1960.

E. Sanchez-palencia, O. Millet, and F. Béchet, Singular problems in shells theory, 2010.
DOI : 10.1007/978-3-642-13815-7

A. Scordelis and K. Lo, Computer analysis of cylindrical shells, Journal of American Concrete Institute, vol.61, pp.539-562, 1969.

P. Seide, An Improved Approximate Theory for the Bending of Laminated Plates, Mechanics Today, vol.5, pp.451-466, 1980.
DOI : 10.1016/B978-0-08-024249-1.50039-X

U. Shrinivasa and K. Rao, A set of pathological tests to validate new finite elements, Sadhana, vol.26, issue.6, pp.549-590, 2001.

L. Srinivas and A. Rao, Flexure of Thick Rectangular Plates, Journal of Applied Mechanics, vol.40, issue.1
DOI : 10.1115/1.3422947

S. Srinivas, A refined analysis of composite laminates, Journal of Sound and Vibration, vol.30, issue.4, pp.495-507, 1973.
DOI : 10.1016/S0022-460X(73)80170-1

F. Ubertini, Patch recovery based on complementary energy, International Journal for Numerical Methods in Engineering, vol.59, issue.11, pp.1501-1538, 2004.
DOI : 10.1002/nme.924

R. Valid, Fondements de la théorie des coques : une présentation surfacique simple, 1995.

J. Whitney and N. Pagano, Shear Deformation in Heterogeneous Anisotropic Plates, Journal of Applied Mechanics, vol.37, issue.4, pp.1031-1036, 1970.
DOI : 10.1115/1.3408654

. Sm-yunus, J. Pawlak, and . Wheeler, Application of the zienkiewicz-zhu error estimator for plate and shell analysis, International Journal for Numerical Methods in Engineering, vol.51, issue.6, pp.1281-1298, 1990.
DOI : 10.1002/nme.1620290612

Z. Zhang and A. Naga, Polynomial preserving gradient recovery and a posteriori estimate for bilinear element on irregular quadrilaterals, International Journal of Numerical Analysis and Modeling, vol.1, issue.1, pp.1-24, 2004.

O. Zienkiewicz, J. Boroomand, and . Zhu, Recovery procedures in error estimation and adaptivity Part I: Adaptivity in linear problems, Computer Methods in Applied Mechanics and Engineering, vol.176, issue.1-4, pp.111-125, 1999.
DOI : 10.1016/S0045-7825(98)00332-6

O. Zienkiewicz, J. Taylor, and . Too, Reduced integration technique in general analysis of plates and shells, International Journal for Numerical Methods in Engineering, vol.4, issue.2, pp.275-290, 1971.
DOI : 10.1002/nme.1620030211

O. Zienkiewicz and J. Zhu, A simple error estimator and adaptive procedure for practical engineerng analysis, International Journal for Numerical Methods in Engineering, vol.7, issue.18, pp.337-357, 1987.
DOI : 10.1016/B978-0-12-747255-3.50049-6

O. Zienkiewicz and J. Zhu, Error estimates and adaptive refinement for plate bending problems, International Journal for Numerical Methods in Engineering, vol.27, issue.12, pp.2839-2853, 1989.
DOI : 10.1002/nme.1620281209

O. Zienkiewicz and J. Zhu, The superconvergent patch recovery anda posteriori error estimates. Part 1: The recovery technique, International Journal for Numerical Methods in Engineering, vol.31, issue.7, pp.1331-1364, 1992.
DOI : 10.1002/nme.1620330702

O. Zienkiewicz and J. Zhu, The superconvergent patch recovery anda posteriori error estimates. Part 2: Error estimates and adaptivity, International Journal for Numerical Methods in Engineering, vol.8, issue.7, pp.1365-1382, 1992.
DOI : 10.1002/nme.1620330703

O. Zienkiewicz and J. Zhu, The superconvergent patch recovery (SPR) and adaptive finite element refinement, Computer Methods in Applied Mechanics and Engineering, vol.101, issue.1-3, pp.207-224, 1992.
DOI : 10.1016/0045-7825(92)90023-D