. Abrahamians, A Nanorobotic System for In Situ Stiffness Measurements on Membranes, IEEE Transactions on Robotics, vol.30, issue.1, pp.119-124, 2014.
DOI : 10.1109/TRO.2013.2280831

. Acosta, A tuning fork based wide range mechanical characterization tool with nanorobotic manipulators inside a scanning electron microscope, Review of Scientific Instruments, vol.82, issue.3, p.35116, 2011.
DOI : 10.1088/0957-4484/16/3/018

. Akita, Manipulation of Nanomaterial by Carbon Nanotube Nanotweezers in Scanning Probe Microscope, Japanese Journal of Applied Physics, vol.41, issue.Part 1, No. 6B, p.414242, 2002.
DOI : 10.1143/JJAP.41.4242

. Aoki, Coupling of quantum-dot light emission with a three-dimensional photonic-crystal nanocavity, Nature Photonics, vol.2, issue.11, pp.688-692, 2008.
DOI : 10.1364/OE.15.004328

. Aphale, High speed nano-scale positioning using a piezoelectric tube actuator with active shunt control, Micro & Nano Letters, vol.2, issue.1, pp.9-12, 2007.
DOI : 10.1049/mnl:20065075

. Arai, Adhesion forces reduction for micro manipulation based on micro physics, Proceedings of Ninth International Workshop on Micro Electromechanical Systems, pp.354-359, 1996.
DOI : 10.1109/MEMSYS.1996.494007

. Atassi, A separation principle for the stabilization of a class of nonlinear systems, IEEE Transactions on Automatic Control, vol.44, issue.9, pp.441672-1687, 1999.
DOI : 10.1109/9.788534

. Aten, A self-reconfiguring metamorphic nanoinjector for injection into mouse zygotes, Review of Scientific Instruments, vol.63, issue.5, p.55005, 2014.
DOI : 10.1214/ss/1009213285

M. Athans, A tutorial on the LQG/LTR method, 1986.

. Babic, Intrinsic Thermal Vibrations of Suspended Doubly Clamped Single-Wall Carbon Nanotubes, Nano Letters, vol.3, issue.11, pp.1577-1580, 2003.
DOI : 10.1021/nl0344716

. Beyeler, A Six-Axis MEMS Force???Torque Sensor With Micro-Newton and Nano-Newtonmeter Resolution, Journal of Microelectromechanical Systems, vol.18, issue.2, pp.433-441, 2009.
DOI : 10.1109/JMEMS.2009.2013387

. Beyeler, Monolithically Fabricated Microgripper With Integrated Force Sensor for Manipulating Microobjects and Biological Cells Aligned in an Ultrasonic Field, Journal of Microelectromechanical Systems, vol.16, issue.1, pp.7-15, 2007.
DOI : 10.1109/JMEMS.2006.885853

. Bibel, Guidelines for the selection of weighting functions for h-infinity control, 1992.

. Borovic, Open-loop versus closed-loop control of MEMS devices: choices and issues, Journal of Micromechanics and Microengineering, vol.15, issue.10, p.151917, 2005.
DOI : 10.1088/0960-1317/15/10/018

. Boudaoud, Modelling of a MEMS-based microgripper: application to dexterous micromanipulation, 2010 IEEE/RSJ International Conference on Intelligent Robots and Systems, pp.5634-5639, 2010.
DOI : 10.1109/IROS.2010.5650553
URL : https://hal.archives-ouvertes.fr/hal-00544636

. Boudaoud, Modeling and Optimal Force Control of a Nonlinear Electrostatic Microgripper, IEEE/ASME Transactions on Mechatronics, vol.18, issue.3, pp.1130-1139, 2013.
DOI : 10.1109/TMECH.2012.2197216
URL : https://hal.archives-ouvertes.fr/hal-00874563

. Boukhnifer, $H_{\infty }$ Loop Shaping Bilateral Controller for a Two-Fingered Tele-Micromanipulation System, IEEE Transactions on Control Systems Technology, vol.15, issue.5, pp.891-905, 2007.
DOI : 10.1109/TCST.2007.902951

. Bouscaud, Estimation of the electron beam-induced specimen heating and the emitted X-rays spatial resolution by Kossel microdiffraction in a scanning electron microscope, Ultramicroscopy, vol.115, pp.115-119, 2012.
DOI : 10.1016/j.ultramic.2012.01.018
URL : https://hal.archives-ouvertes.fr/hal-00951877

J. Doyle, Structured uncertainty in control system design, 1985 24th IEEE Conference on Decision and Control, pp.260-265, 1985.
DOI : 10.1109/CDC.1985.268842

. Doyle, Review of lfts, lmis, and µ, Decision and Control Proceedings of the 30th IEEE Conference on, pp.1227-1232, 1991.

. Doyle, Statespace solutions to standard h 2 and h? control problems, Automatic Control IEEE Transactions on, issue.8, pp.34831-847, 1989.

. Doyle, Robustness with observers, 1979.

. Driesen, Micro manipulation by adhesion with two collaborating mobile micro robots, Journal of Micromechanics and Microengineering, vol.15, issue.10, pp.15-259, 2005.
DOI : 10.1088/0960-1317/15/10/S02

. Egerton, Radiation damage in the TEM and SEM, Micron, vol.35, issue.6, pp.399-409, 2004.
DOI : 10.1016/j.micron.2004.02.003

. Eisinberg, PI force control of a microgripper for assembling biomedical microdevices, IEE Proceedings-Circuits, Devices and Systems, pp.148348-352, 2001.
DOI : 10.1049/ip-cds:20010172

. Epp, Dynamic measurement of gas damping effects in MEMS, Current Proceedings, SEM International Congress X, 2004.

. Esfandiari, Observer-based control of uncertain linear systems: Recovering state feedback robustness under matching condition, American Control Conference, pp.931-936, 1989.

. Esfandiari, Output feedback stabilization of fully linearizable systems, International Journal of Control, vol.4, issue.5, pp.1007-1037, 1992.
DOI : 10.1109/TAC.1987.1104550

. Fahlbusch, Flexible microrobotic system MINIMAN: design, actuation principle and control, 1999 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (Cat. No.99TH8399), pp.156-161, 1999.
DOI : 10.1109/AIM.1999.803159

. Fahlbusch, Nanomanipulation in a scanning electron microscope, Journal of Materials Processing Technology, vol.167, issue.2-3, pp.371-382, 2005.
DOI : 10.1016/j.jmatprotec.2005.06.022

. Falvo, Bending and buckling of carbon nanotubes under large strain, Nature, issue.6651, pp.389582-584, 1997.

S. Fatikow, Automated nanohandling by microrobots, 2007.
DOI : 10.1007/978-1-84628-978-1

. Fatikow, A flexible microrobot-based microassembly station, 1999 7th IEEE International Conference on Emerging Technologies and Factory Automation. Proceedings ETFA '99 (Cat. No.99TH8467), pp.135-169, 2000.
DOI : 10.1109/ETFA.1999.815384

. Fleming, A New Method for Robust Damping and Tracking Control of Scanning Probe Microscope Positioning Stages, IEEE Transactions on Nanotechnology, vol.9, issue.4, pp.438-448, 2010.
DOI : 10.1109/TNANO.2009.2032418

. Franklin, Sub-10 nm Carbon Nanotube Transistor, Nano Letters, vol.12, issue.2, pp.758-762, 2012.
DOI : 10.1021/nl203701g

. Freidovich, Performance recovery of feedback-linearization-based designs. Automatic Control, IEEE Transactions on, issue.10, pp.532324-2334, 2008.

. Friedt, Introduction to the quartz tuning fork, American Journal of Physics, vol.75, issue.5, pp.415-422, 2007.
DOI : 10.1119/1.2711826
URL : https://hal.archives-ouvertes.fr/hal-00493935

. Fujioka, Function testing of bipolar ics and lsis with the stroboscopic scanning electron microscope. Solid-State Circuits, IEEE Journal, issue.2, pp.15177-183, 1980.

. Fukuda, Fabrication and Property Analysis of MWNT Junctions through Nanorobotic Manipulations, International Journal of Nonlinear Sciences and Numerical Simulation, vol.13, issue.2, pp.3-4753, 2002.
DOI : 10.1126/science.269.5230.1550

. Fukuda, Assembly of nanodevices with carbon nanotubes through nanorobotic manipulations, Proceedings of the IEEE, pp.911803-1818, 2003.
DOI : 10.1109/JPROC.2003.818334

. Fukuda, Micro-nanorobotic manipulation systems and their applications, 2013.
DOI : 10.1007/978-3-642-36391-7

. Gahinet, A linear matrix inequality approach toH??? control, International Journal of Robust and Nonlinear Control, vol.29, issue.4, pp.421-448, 1994.
DOI : 10.1002/rnc.4590040403

. Gao, An alternative paradigm for control system design, Decision and Control Proceedings of the 40th IEEE Conference on, pp.4578-4585, 2001.

. Gauthier, Robotic micro-assembly, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00541932

. Ghafarirad, Robust control with unknown dynamic estimation for multi-axial piezoelectric actuators with coupled dynamics, Comptes Rendus M??canique, vol.340, issue.9, pp.646-660, 2012.
DOI : 10.1016/j.crme.2012.07.003

. Gjerde, Carbon nanotube forests: a non-stick workbench for nanomanipulation, Nanotechnology, vol.17, issue.19, p.174917, 2006.
DOI : 10.1088/0957-4484/17/19/023

. Goldfarb, A flexure-based gripper for smallscale manipulation, Robotica, issue.02, pp.17181-187, 1999.

. Gong, Automated nanoprobing under scanning electron microscopy, 2013 IEEE International Conference on Robotics and Automation, pp.1433-1438, 2013.
DOI : 10.1109/ICRA.2013.6630759

R. Gorman, Control of MEMS Nanopositioners With Nano-Scale Resolution, Microelectromechanical Systems, pp.151-159, 2006.
DOI : 10.1115/IMECE2006-16190

. Gorman, Design of an on-chip microscale nanoassembly system, International Journal of Nanomanufacturing, vol.1, issue.6, pp.710-721, 2007.
DOI : 10.1504/IJNM.2007.017990

. Green, -Spectral Factorization Approach to $\mathcal{H}_\infty $, SIAM Journal on Control and Optimization, vol.28, issue.6, pp.1350-1371, 1990.
DOI : 10.1137/0328071

. Gu, Modeling and Control of Piezo-Actuated Nanopositioning Stages: A Survey, IEEE Transactions on Automation Science and Engineering, vol.13, issue.1, 2014.
DOI : 10.1109/TASE.2014.2352364

. Guo, On the convergence of an extended state observer for nonlinear systems with uncertainty, Systems & Control Letters, vol.60, issue.6, pp.60420-430, 2011.
DOI : 10.1016/j.sysconle.2011.03.008

. Haddab, A microgripper using smart piezoelectric actuators, Proceedings. 2000 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2000) (Cat. No.00CH37113), pp.659-664, 2000.
DOI : 10.1109/IROS.2000.894679

. Hatamura, Direct coupling system between nanometer world and human world, IEEE Proceedings on Micro Electro Mechanical Systems, An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots., pp.203-208, 1990.
DOI : 10.1109/MEMSYS.1990.110277

. Hertel, Manipulation of Individual Carbon Nanotubes and Their Interaction with Surfaces, The Journal of Physical Chemistry B, vol.102, issue.6, pp.910-915, 1998.
DOI : 10.1021/jp9734686

. Ho, MICRO-ELECTRO-MECHANICAL-SYSTEMS (MEMS) AND FLUID FLOWS, Annual Review of Fluid Mechanics, vol.30, issue.1, pp.579-612, 1998.
DOI : 10.1146/annurev.fluid.30.1.579

. Horsley, Design and fabrication of an angular microactuator for magnetic disk drives, Journal of Microelectromechanical Systems, vol.7, issue.2, pp.141-148, 1998.
DOI : 10.1109/84.679333

. Huang, Mechatronics and control of a long-range nanometer positioning servomechanism, Mechatronics, vol.19, issue.1, pp.14-28, 2009.
DOI : 10.1016/j.mechatronics.2008.07.005

. Ishikawa, Investigation of micro mechanical vibration of piezoelectric actuators using a stroboscopic sem, Journal of electron microscopy, vol.42, issue.1, pp.35-40, 1993.

. Ivan, Duobimorph actuator made of pmn-pt [011]: 3d modeling, development and characterization, Advanced Intelligent Mechatronics (AIM) 2013 IEEE/ASME International Conference on, pp.140-145, 2013.
URL : https://hal.archives-ouvertes.fr/hal-00876288

. Iwaya, Design of an effective vibration isolation system for measurements sensitive to low-frequency vibrations, Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, vol.30, issue.6, p.30063201, 2012.
DOI : 10.1116/1.4754700

D. Jasper, SEM-based motion control for automated robotic nanohandling, 2011.

J. B. Johnson, Thermal agitation of electricity in conductors, p.97, 1928.

H. K. Khalil, High-gain observers in nonlinear feedback control, Control , Automation and Systems ICCAS 2008. International Conference on, p.xlvii?lvii, 2008.
URL : https://hal.archives-ouvertes.fr/hal-01248861

. Khalil, High-gain observers in nonlinear feedback control, International Journal of Robust and Nonlinear Control, vol.58, issue.9, pp.993-1015, 2014.
DOI : 10.1137/1.9780898718683
URL : https://hal.archives-ouvertes.fr/hal-01248861

. Kim, In situ manipulation and characterizations using nanomanipulators inside a field emissionscanning electron microscope. Review of scientific instruments, pp.744021-4025, 2003.

. Komati, Prototyping of a highly performant and integrated piezoresistive force sensor for microscale applications, Journal of Micromechanics and Microengineering, vol.24, issue.3, p.35018, 2014.
DOI : 10.1088/0960-1317/24/3/035018
URL : https://hal.archives-ouvertes.fr/hal-00958816

. Korayem, Virtual reality interface for nano-manipulation based on enhanced images, The International Journal of Advanced Manufacturing Technology, vol.7, issue.7, pp.9-121153, 2012.
DOI : 10.1021/nl070773m

. Koyano, Micro object handling system with concentrated visual fields and new handling skills, Proceedings of IEEE International Conference on Robotics and Automation, pp.130-140, 1996.
DOI : 10.1109/ROBOT.1996.506545

. Li, A Totally Decoupled Piezo-Driven XYZ Flexure Parallel Micropositioning Stage for Micro/Nanomanipulation, IEEE Transactions on Automation Science and Engineering, vol.8, issue.2, pp.265-279, 2011.
DOI : 10.1109/TASE.2010.2077675

. Li, Design and robust repetitive control of a new parallelkinematic xy piezostage for micro/nanomanipulation, Mechatronics, IEEE/ASME Transactions on, issue.6, pp.171120-1132, 2012.

R. Lim, Nanomanipulator-assisted fabrication and characterization of carbon nanotubes inside scanning electron microscope, Micron, vol.36, issue.5, pp.36471-476, 2005.
DOI : 10.1016/j.micron.2005.03.005

. Liu, A simple derivation of ARE solutions to the standard control problem based on LMI solution, Systems & Control Letters, vol.55, issue.6, pp.55487-493, 2006.
DOI : 10.1016/j.sysconle.2005.10.002

. Liu, Ultra-Precision Measurement and Control of Angle Motion in Piezo-Based Platforms Using Strain Gauge Sensors and a Robust Composite Controller, Sensors, vol.2, issue.7, pp.139070-9084, 2013.
DOI : 10.3390/act2010001

. Madó-nski, Survey on methods of increasing the efficiency of extended state disturbance observers, ISA Transactions, vol.56, pp.18-27, 2015.
DOI : 10.1016/j.isatra.2014.11.008

. Matteson, Electron backscattering diffraction investigation of focused ion beam surfaces, Journal of Electronic Materials, vol.6, issue.1, pp.3133-3172, 2002.
DOI : 10.1007/978-1-4613-0491-3

. Mazerolle, Nanomanipulation in a scanning electron microscope, Journal of Materials Processing Technology, vol.167, issue.2, pp.371-382, 2005.

. Mertens, Effects of temperature and pressure on microcantilever resonance response, Ultramicroscopy, vol.97, issue.1-4, pp.119-126, 2003.
DOI : 10.1016/S0304-3991(03)00036-6

. Meyer, Micro- and nanomanipulation inside the SEM, Journal of Physics: Conference Series, p.12074, 2008.
DOI : 10.1088/1742-6596/126/1/012074

L. A. Miller, Structural dynamics and resonance in plants with nonlinear stiffness, Journal of Theoretical Biology, vol.234, issue.4, pp.511-524, 2005.
DOI : 10.1016/j.jtbi.2004.12.004

]. Boudaoud and S. R. , An Overview on Gripping Force Measurement at the Micro and Nano-Scales Using Two-Fingered Microrobotic Systems, International Journal of Advanced Robotic Systems, vol.32, issue.8, p.45, 2014.
DOI : 10.1016/j.precisioneng.2007.07.002

. Muller, Room design for high-performance electron microscopy, Ultramicroscopy, vol.106, issue.11-12, pp.1061033-1040, 2006.
DOI : 10.1016/j.ultramic.2006.04.017

. Nakabayashi, Inexpensive two-tip nanomanipulator for a SEM, Applied Surface Science, vol.254, issue.1, pp.405-411, 2007.
DOI : 10.1016/j.apsusc.2007.07.089

. Nakabayashi, Low-Cost Nanomanipulator for In Situ Experiments in a SEM, Microscopy and Microanalysis, vol.12, issue.04, pp.12311-316, 2006.
DOI : 10.1038/384147a0

. Nakazato, Micromanipulation system using scanning electron microscope, Microsystem technologies, pp.15859-864, 2009.
DOI : 10.1007/s00542-009-0815-4

. Newbury, Scanning electron microscopy and X-ray microanalysis, J. I, 2003.
DOI : 10.1007/978-1-4757-9027-6

C. T. Nguyen, Micromechanical resonators for oscillators and filters, 1995 IEEE Ultrasonics Symposium. Proceedings. An International Symposium, 1995.
DOI : 10.1109/ULTSYM.1995.495626

. Otsuka, Pegylated nanoparticles for biological and pharmaceutical applications Advanced drug delivery reviews, pp.246-255, 2012.

. Packard, The complex structured singular value, Automatica, vol.29, issue.1, pp.71-109, 1993.
DOI : 10.1016/0005-1098(93)90175-S

. Pao, Combined Feedforward/Feedback Control of Atomic Force Microscopes, 2007 American Control Conference, pp.3509-3515, 2007.
DOI : 10.1109/ACC.2007.4282338

. Park, A sub-micron metallic electrothermal gripper, Microsystem technologies, pp.367-373, 2010.
DOI : 10.1109/84.925771

. Peralta, Demonstration of electron acceleration in a laser-driven dielectric microstructure, Nature, vol.1507, issue.7474, pp.50391-94, 2013.
DOI : 10.1103/PhysRev.93.406

. Pérez, Modeling, Fabrication, and Validation of a High-Performance 2-DoF Piezoactuator for Micromanipulation, IEEE/ASME Transactions on Mechatronics, vol.10, issue.2, pp.161-171, 2005.
DOI : 10.1109/TMECH.2005.844712

. Pluska, Separation of image-distortion sources and magnetic-field measurement in scanning electron microscope (sem) Micron, pp.46-50, 2009.

. Pluska, Identification and reduction of acoustic-noise influence on focused ion beam (FIB), Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, vol.348, 2015.
DOI : 10.1016/j.nimb.2014.11.020

. Polyakov, Manipulation of nanoparticles of different shapes inside a scanning electron microscope, Beilstein Journal of Nanotechnology, vol.5, issue.1, pp.133-140, 2014.
DOI : 10.3762/bjnano.5.13

. Postma, Manipulation and Imaging of Individual Single-Walled Carbon Nanotubes with an Atomic Force Microscope, Advanced Materials, vol.12, issue.17, pp.121299-1302, 2000.
DOI : 10.1002/1521-4095(200009)12:17<1299::AID-ADMA1299>3.0.CO;2-O

. Radke, A survey of state and disturbance observers for practitioners, 2006 American Control Conference, p.6, 2006.
DOI : 10.1109/ACC.2006.1657545

S. Régnier, La manipulation auxéchellesaux´auxéchelles microscopiques. Habilitationà Habilitation`Habilitationà diriger des recherches, 2006.

. Rong, Mechanical Properties of Nanoparticle Chain Aggregates by Combined AFM and SEM:?? Isolated Aggregates and Networks, Nano Letters, vol.6, issue.12, pp.2646-2655, 2006.
DOI : 10.1021/nl061146k

. Sader, Method for the calibration of atomic force microscope cantilevers, Review of Scientific Instruments, vol.9, issue.7, pp.663789-3798, 1995.
DOI : 10.1063/1.325596

. Saeidpourazar, Towards fused vision and force robust feedback control of nanorobotic-based manipulation and grasping, Mechatronics, vol.18, issue.10, pp.18566-577, 2008.
DOI : 10.1016/j.mechatronics.2008.05.014

. Sandberg, Temperature and pressure dependence of resonance in multi-layer microcantilevers, Journal of Micromechanics and Microengineering, vol.15, issue.8, p.151454, 2005.
DOI : 10.1088/0960-1317/15/8/011

. Sardan, Rapid prototyping of nanotube-based devices using topology-optimized microgrippers, Nanotechnology, vol.19, issue.49, p.19495503, 2008.
DOI : 10.1088/0957-4484/19/49/495503

C. Scherer, $H_\infty $-Optimization without Assumptions on Finite or Infinite Zeros, SIAM Journal on Control and Optimization, vol.30, issue.1, pp.143-166, 1992.
DOI : 10.1137/0330010

. Schmoeckel, Remotely controllable mobile microrobots acting as nano positioners and intelligent tweezers in scanning electron microscopes (SEMs), Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164), pp.3909-3913, 2001.
DOI : 10.1109/ROBOT.2001.933226

. Schrijver, Disturbance Observers for Rigid Mechanical Systems: Equivalence, Stability, and Design, Journal of Dynamic Systems, Measurement, and Control, vol.25, issue.4, pp.539-548, 2002.
DOI : 10.1115/1.1513570

. Semonin, Peak External Photocurrent Quantum Efficiency Exceeding 100% via MEG in a Quantum Dot Solar Cell, Science, vol.16, issue.8, pp.3341530-1533, 2011.
DOI : 10.1002/adfm.200600489

. Sharma, Virtual reality and haptics in nano-and bionanotechnology. Handbook of theoretical and computational nanotechnology, pp.1-33, 2005.

T. Sievers, Global sensor feedback for automatic nanohandling inside a scanning electron microscope, Intelligent Production Machines and Systems-2nd I* PROMS Virtual International Conference, p.289, 2006.
DOI : 10.1016/B978-008045157-2/50054-7

M. Sitti, Survey of nanomanipulation systems, Proceedings of the 2001 1st IEEE Conference on Nanotechnology. IEEE-NANO 2001 (Cat. No.01EX516), pp.75-80, 2001.
DOI : 10.1109/NANO.2001.966397

. Sitti, Development of a scaled teleoperation system for nano scale interaction and manipulation, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164), pp.860-867, 2001.
DOI : 10.1109/ROBOT.2001.932658

. Sitti, Two-dimensional fine particle positioning under an optical microscope using a piezoresistive cantilever as a manipulator, Journal of Micromechatronics, vol.1, issue.1, pp.25-48, 2000.
DOI : 10.1163/156856300744650

. Skogestad, Multivariable feedback control: analysis and design, 2007.

. Stievater, Measurement of thermal-mechanical noise in microelectromechanical systems, Applied Physics Letters, vol.81, issue.10, pp.811779-1781, 2002.
DOI : 10.1109/22.848501

A. A. Stoorvogel, The Singular $H_\infty $ Control Problem with Dynamic Measurement Feedback, SIAM Journal on Control and Optimization, vol.29, issue.1, pp.160-184, 1991.
DOI : 10.1137/0329009

. Suga, Nanomanipulation of Single Nanoparticle Using a Carbon Nanotube Probe in a Scanning Electron Microscope, Applied Physics Express, vol.2, issue.5, p.55004, 2009.
DOI : 10.1143/APEX.2.055004

. Sumali, Air-drag damping on micro-cantilever beams, XXVI International Modal Analysis Conference (IMAC): Conference & Exposition on Structural Dynamics. Society of Experimental Mechanics, 2008.

. Tamadazte, Four dof piezoelectric microgripper equipped with a smart cmos camera, Journal, vol.21, issue.2, pp.256-258, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00768463

. Tang, Development and active disturbance rejection control of a compliant micro-/nanopositioning piezostage with dual mode. Industrial Electronics, IEEE Transactions on, issue.3, pp.611475-1492, 2014.

. Tian, From poncelet's invariance principle to active disturbance rejection, American Control Conference ACC'09, pp.2451-2457, 2009.

. Toda, Evaluation of bimaterial cantilever beam for heat sensing at atmospheric pressure, Review of Scientific Instruments, vol.81, issue.5, p.81, 2010.
DOI : 10.1016/S0304-3991(03)00036-6

R. Tsai, Design and analysis of planar compliant microgripper based on kinematic approach, Journal of Micromechanics and Microengineering, vol.15, issue.1, p.143, 2005.
DOI : 10.1088/0960-1317/15/1/022

. Villanueva, Nonlinearity in nanomechanical cantilevers, Physical Review B, vol.87, issue.2, p.24304, 2013.
DOI : 10.1115/1.3264779

A. Vladar, Scanning electron microscopy in real world environment, 2003.

. Wang, A comparison study of advanced state observer design techniques, Proceedings of the 2003 American Control Conference, 2003., pp.4754-4759, 2003.
DOI : 10.1109/ACC.2003.1242474

. Wei, In situ measurements on individual thin carbon nanotubes using nanomanipulators inside a scanning electron microscope, Ultramicroscopy, vol.110, issue.3, pp.110182-189, 2010.
DOI : 10.1016/j.ultramic.2009.11.007

P. D. Welch, The use of fast Fourier transform for the estimation of power spectra: A method based on time averaging over short, modified periodograms, IEEE Transactions on Audio and Electroacoustics, vol.15, issue.2, pp.70-73, 1967.
DOI : 10.1109/TAU.1967.1161901

. Wong, In-plane motion characterization of MEMS resonators using stroboscopic scanning electron microscopy, Sensors and Actuators A: Physical, vol.138, issue.1, pp.167-178, 2007.
DOI : 10.1016/j.sna.2007.04.046

. Wong, Nanobeam Mechanics: Elasticity, Strength, and Toughness of Nanorods and Nanotubes, Science, vol.277, issue.5334, pp.2771971-1975, 1997.
DOI : 10.1126/science.277.5334.1971

. Wu, Graphene-based in-plane micro-supercapacitors with high power and energy densities, Nature Communications, vol.24, 2013.
DOI : 10.1002/adma.201201948

. Xie, Three-dimensional automated micromanipulation using a nanotip gripper with multi-feedback, Journal of Micromechanics and Microengineering, vol.19, issue.7, p.75009, 2009.
DOI : 10.1088/0960-1317/19/7/075009

Q. Xu, Precision position/force interaction control of a piezoelectric multimorph microgripper for microassembly, Automation Science and Engineering IEEE Transactions on, vol.10, issue.3, pp.503-514, 2013.

Q. Xu, Robust impedance control of a compliant microgripper for highspeed position/force regulation. Industrial Electronics, IEEE Transactions on, vol.62, issue.2, pp.1201-1209, 2015.

. Xu, Micro-/nanopositioning using model predictive output integral discrete sliding mode control. Industrial Electronics, IEEE Transactions on, vol.59, issue.2, pp.1161-1170, 2012.

. Yamamoto, Prototyping ubiquitous micro-manipulation system, Proceedings 2003 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM 2003), pp.709-714, 2003.
DOI : 10.1109/AIM.2003.1225430

. Yi, Disturbance-observer-based hysteresis compensation for piezoelectric actuators, Mechatronics, IEEE/ASME Transactions on, vol.14, issue.4, pp.456-464, 2009.

. Zadegan, Structural DNA Nanotechnology: From Design to Applications, International Journal of Molecular Sciences, vol.40, issue.12, pp.7149-7162, 2012.
DOI : 10.1093/nar/gkr1173

G. Zames, Feedback and optimal sensitivity: Model reference transformations, multiplicative seminorms, and approximate inverses, IEEE Transactions on Automatic Control, vol.26, issue.2, pp.301-320, 1981.
DOI : 10.1109/TAC.1981.1102603

. Zhang, Pressure-dependent damping characteristics of microsilicon beam resonators for different resonant modes, Sensors, 2005 IEEE, 2005.

. Zhang, A load-lockcompatible nanomanipulation system for scanning electron microscope, ASME Transactions on Mechatronics, vol.18, issue.1, 2013.

. Zhang, Nanorobotic Manipulation of 1D Nanomaterials in Scanning Electron Microscopes, Nanorobotics, pp.155-165, 2013.
DOI : 10.1007/978-1-4614-2119-1_9

. Zheng, On Validation of Extended State Observer Through Analysis and Experimentation, Journal of Dynamic Systems, Measurement, and Control, vol.56, issue.2, p.24505, 2012.
DOI : 10.1016/j.conengprac.2009.03.005

. Zhou, Fusing force and vision feedback for micromanipulation, Proceedings. 1998 IEEE International Conference on Robotics and Automation (Cat. No.98CH36146), pp.1220-1225, 1998.
DOI : 10.1109/ROBOT.1998.677265

. Zhu, Plasmonic ???top-hat??? nano-star arrays by electron beam lithography, Microelectronic Engineering, vol.139, pp.13-18, 2015.
DOI : 10.1016/j.mee.2015.04.084

. Ziaie, Introduction to micro/nanofabrication, Springer Handbook of Nanotechnology List of Figures, pp.197-238, 2007.

. Zhu, Structures produced by electron beam lithography. The smaller ones were 500 nm wide and 50 nm tall, 2015.

. Abrahamians, Characterization of a nano-structure in the SEM. (a) Sample before starting the measurements. (b) Membrane damaged by the measuring probe, 2014.

. Newbury, Image of the mineral skeleton of a Radiolarian protozoa, acquired with optical and scanning electron microscopes, p.15, 2003.

. Hertel, Manipulation of a CNT over a surface using a needle-type end-effector, 1998.

. Meyer, Cutting of a ultra thin (50 nm) polystyrene film using a sharp needle, p.20, 2008.

. Rong, AFM tips with different stiffness were used to hold and perform traction test on a nanoparticle chain aggregate, p.20, 2006.

. Dechev, A passive gripper used to assemble 3D structures inside the SEM, 2004.

. Andersen, By heating different parts of each finger, open and close movements could be produced, p.22, 2009.

. Sandberg, M1?M5) of (a) the uncoated and (b) the gold-coated cantilever as functions of temperature, Normalized resonance frequencies of the first five flexural modes, p.44, 2005.

C. Zeiss, S. Auriga, and .. , from the EQUIPEX ROBOTEX project, where the experiments were performed, p.47

P. Vibrometer, considering different reflection levels and analog output gains, p.49

. Khalil, Sketch of the noise effects on the observer error. From, p.93, 2014.

L. Document-generated-with and . At-e-x, the L AT E X style for PhD Thesis created by S. Galland ? http://www.multiagent.fr/ThesisStyle the tex-upmethodology package suite ? http