, The degradation of poly(ethylene glycol) in an Inconel 718 feedstock in the metal injection moulding process, Powder Technology, vol.284, issue.284, pp.467-474, 2015.
DOI : 10.1016/j.powtec.2015.07.032
, Development and Characterization of a Metal Injection Molding Bio Sourced Inconel 718 Feedstock Based on Polyhydroxyalkanoates, Metals, vol.52, issue.4, 2016.
DOI : 10.1016/j.jeurceramsoc.2013.06.027
URL : https://hal.archives-ouvertes.fr/hal-01446395
, Development and characterization of a bio sourced feedstock of superalloy in metal injection moulding process, Loic. Powder Metallurgy, vol.0, p.82
, Supercritical Debinding of Environmentally Friendly Inconel 718 Feedstock to Metal Injection Moulding Process, Key Engineering Materials, vol.716, issue.716, pp.824-829, 2016.
DOI : 10.1016/j.jallcom.2012.08.069
URL : https://hal.archives-ouvertes.fr/hal-01480059
, Characterization by infrared spectroscopy of binder based on polyethylene glycol and inconel 718 feedstock for powder injection moulding, Computer Methods in Materials Science, vol.15, issue.1, pp.2015232-238
, Injection molding of nickel based 625 superalloy: Sintering, heat treatment, microstructure and mechanical properties, Journal of Alloys and Compounds, vol.546, pp.192-207, 2013.
DOI : 10.1016/j.jallcom.2012.08.069
, Development and Thermo-physical Characterization of Polymers/Metallic Powder Mixtures for MIM Application, Procedia Engineering, vol.81, pp.2530-2536, 2014.
DOI : 10.1016/j.proeng.2014.10.362
, Microstructural and tensile characterization of Inconel 718 laser coatings for aeronautic components, Optics and Lasers in Engineering, vol.51, issue.7, pp.813-821, 2013.
DOI : 10.1016/j.optlaseng.2013.01.011
, Development of binder systems based on CAB for powder injection moulding (PIM) and micro powder injection moulding (µ-PIM) of Zircon and Invar powders, 2013.
URL : https://hal.archives-ouvertes.fr/tel-01272350
, Fabrication du combustible nucléaire par injection : Étude de la formulation et du déliantage d'une pâte contenant des actinides, 2012.
, Expérimentation, modélisation et simulation dans le domaine de l'élaboration de microcomposants injectés à partir de poudres, 2008.
, Microstructural and mechanical characterization of injection molded 718 superalloy powders, Journal of Alloys and Compounds, vol.576, pp.140-153, 2013.
DOI : 10.1016/j.jallcom.2013.04.042
, Material characterisation to identify the rheological behaviour for powder injection moulding, International Journal of Materials Research, vol.106, issue.9, pp.943-947, 2015.
DOI : 10.3139/146.111265
, Powder injection moulding -Design and applications, 2003.
, Elaboration of PIM feedstocks with 316L fine stainless steel powders for the processing of micro-components, Powder Technology, vol.208, issue.2, pp.383-389, 2011.
DOI : 10.1016/j.powtec.2010.08.033
, Water soluble Invar 36 feedstock development for ??PIM, Journal of Materials Processing Technology, vol.214, issue.2, pp.436-444, 2014.
DOI : 10.1016/j.jmatprotec.2013.09.014
, Micro-powder injection molding of cemented tungsten carbide: feedstock preparation and properties, Ceramics International, vol.41, issue.3, pp.3605-3612, 2015.
DOI : 10.1016/j.ceramint.2014.11.022
, Experimental analysis and finite element simulation of the co-sintering of bi-material components, Powder Technology, vol.268, pp.269-278, 2014.
DOI : 10.1016/j.powtec.2014.08.023
, Development and property identification of 316L stainless steel feedstock for PIM and ??PIM, Powder Technology, vol.190, issue.1-2, pp.123-128, 2009.
DOI : 10.1016/j.powtec.2008.04.044
URL : https://hal.archives-ouvertes.fr/hal-00363793
, Mouldability of various zirconia micro gears in micro powder injection moulding, Journal of the European Ceramic Society, vol.35, issue.1, pp.171-177, 2015.
DOI : 10.1016/j.jeurceramsoc.2014.07.027
, Influence of powder morphology on properties of ceramic injection moulding feedstocks, Journal of the European Ceramic Society, vol.31, issue.14, pp.2551-2558, 2011.
DOI : 10.1016/j.jeurceramsoc.2011.01.013
, Two-stage sintering of nano-sized yttria stabilized zirconia process by powder injection moulding, Journal of Materials Processing Technology, vol.192, issue.193, pp.192-193, 2007.
DOI : 10.1016/j.jmatprotec.2007.04.097
, Experimental and numerical analysis of the particle size effect on the densification behaviour of metal injection moulded tungsten parts during sintering, Powder Technology, vol.270, pp.230-243, 2015.
DOI : 10.1016/j.powtec.2014.10.019
, Densification and microstructural development during sintering of powder injection molded Fe micro???nanopowder, Powder Technology, vol.253, pp.596-601, 2014.
DOI : 10.1016/j.powtec.2013.11.048
, Low temperature powder injection molding of iron micro-nano powder mixture, Powder Technology, vol.228, pp.199-205, 2012.
DOI : 10.1016/j.powtec.2012.05.016
, Powder metallurgy and particulate materials processing: the processes, materials, products, properties, and applications. (Metal Powder Industries Fed, 2005.
, Metal injection molding: effects of the vinyl acetate content on binder behavior, Journal of Materials Processing Technology, vol.67, issue.1-3, pp.120-125, 1997.
DOI : 10.1016/S0924-0136(96)02830-0
, Evaluation of the feasibility of the powder injection moulding process for the fabrication of nuclear fuel and comparison of several formulations, Powder Technology, vol.279, pp.49-60, 2015.
DOI : 10.1016/j.powtec.2015.03.038
, Powder injection molding of Stellite 6 powder: Sintering, microstructural and mechanical properties, Materials Science and Engineering: A, vol.651, pp.914-924, 2016.
DOI : 10.1016/j.msea.2015.11.058
, The effects of binder components in wax/oil systems for metal injection molding, Journal of Materials Processing Technology, vol.196, issue.1-3, pp.94-100, 2008.
DOI : 10.1016/j.jmatprotec.2007.05.009
, Effect of a binder system on the low-pressure powder injection moulding of water-soluble zircon feedstocks, Journal of the European Ceramic Society, vol.33, issue.15-16, pp.3185-3194, 2013.
DOI : 10.1016/j.jeurceramsoc.2013.06.027
, Effects of surfactant on properties of MIM feedstock, Transactions of Nonferrous Metals Society of China, vol.17, pp.1-8, 2007.
, Available at: http://eduscol.education.fr/sti/ressources_pedagogiques/itec-tp-sur-moule-standard-babyplastalecop, 2016.
, Analyses of powder segregation in MIM, Metal Powder Report, vol.57, issue.5, pp.30-33, 2002.
DOI : 10.1016/S0026-0657(02)80173-4
, Experimental and numerical investigations on properties and quality of parts produced by MIM, Powder Metallurgy, vol.30, issue.1, pp.228-234, 2001.
DOI : 10.1002/fld.1650200606
, Low-pressure injection molding processing of a 316-L stainless steel feedstock, Materials Letters, vol.52, issue.4-5, pp.360-365, 2002.
DOI : 10.1016/S0167-577X(01)00422-0
, Powder-binder separation in injection moulded green parts, Journal of the European Ceramic Society, vol.30, issue.14, pp.2827-2832, 2010.
DOI : 10.1016/j.jeurceramsoc.2010.02.020
, Direct observation of mould cavity filling in ceramic injection moulding, Journal of the European Ceramic Society, vol.28, issue.10, pp.1923-1929, 2008.
DOI : 10.1016/j.jeurceramsoc.2008.02.001
URL : https://hal.archives-ouvertes.fr/hal-00352275
, Solvent debinding mechanism for alumina injection molded compacts with water-soluble binders, Ceramics International, vol.29, issue.7, pp.745-756, 2003.
DOI : 10.1016/S0272-8842(02)00226-2
, Evaluation of the supercritical CO2 as method of debinding for PIM parts
, Extraction of binders from green ceramic bodies by supercritical fluid: influence of the porosity, Journal of the European Ceramic Society, vol.22, issue.9-10, pp.1403-1409, 2002.
DOI : 10.1016/S0955-2219(01)00474-5
, EPMA Powder metallurgy summer school course notes 8, pp.177-186, 2014.
, in EPMA Powder metallurgy summer school course notes 9, pp.187-204, 2014.
, in EPMA Powder metallurgy summer school course notes 219?242 (European powder metallurgy association, 2014.
, Markets applications, and financial aspects of global metal powder injection moulding (MIM) technologies, Metal Powder Report, vol.67, issue.1, pp.18-26, 2012.
DOI : 10.1016/S0026-0657(12)70051-6
, Determination of critical and optimal powder loadings for 316L fine stainless steel feedstocks for micro-powder injection molding, Journal of Materials Processing Technology, vol.212, issue.11, pp.2173-2182, 2012.
DOI : 10.1016/j.jmatprotec.2012.05.023
, Effect of backbone polymer on properties of 316L stainless steel MIM compact, Journal of Materials Processing Technology, vol.209, issue.15-16, pp.5527-5535, 2009.
DOI : 10.1016/j.jmatprotec.2009.05.011
, Influence of surface quality and porosity on fatigue behaviour of Ti???6Al???4V components processed by MIM, Materials Science and Engineering: A, vol.527, issue.7-8, pp.1800-1805, 2010.
DOI : 10.1016/j.msea.2009.11.007
, Powder injection moulding PIM of feedstock based on hydrosoluble binder and submicronic powder to manufacture parts having micro-details, Powder Technology, vol.208, issue.2, pp.472-479, 2011.
DOI : 10.1016/j.powtec.2010.08.045
, Debinding behaviour of a water soluble PEG/PMMA binder for Ti metal injection??moulding, Materials Chemistry and Physics, vol.139, issue.2-3, pp.557-565, 2013.
DOI : 10.1016/j.matchemphys.2013.01.057
, Mechanical properties and pitting corrosion behaviour of 316L stainless steel parts obtained by a modified metal injection moulding process, Journal of Materials Processing Technology, vol.143, issue.144, pp.143-144, 2003.
DOI : 10.1016/S0924-0136(03)00402-3
, Processing of P/M T15 high speed steels by mould casting using thermosetting binders, Materials Chemistry and Physics, vol.67, issue.1-3, pp.43-48, 2001.
DOI : 10.1016/S0254-0584(00)00418-1
, Using an agar-based binder to produce porous NiTi alloys by metal injection moulding, Intermetallics, vol.37, pp.92-99, 2013.
DOI : 10.1016/j.intermet.2013.02.006
, Interaction between binder and powder in injection moulding of alumina, Journal of Materials Science, vol.26, issue.19, pp.5207-5212, 1994.
DOI : 10.1007/BF01151118
, Surface modification of alumina powder for LPIM, Journal of the European Ceramic Society, vol.17, issue.2-3, pp.217-223, 1997.
DOI : 10.1016/S0955-2219(96)00171-9
, Influence of stearic acid on suspension structure and green microstructure of injection-molded zirconia ceramics, Ceramics International, vol.25, issue.2, pp.191-195, 1999.
DOI : 10.1016/S0272-8842(98)00024-8
, Crystallization and morphology of biodegradable or biostable single and double crystalline block copolymers, Progress in Polymer Science, vol.34, issue.6, pp.516-560, 2009.
DOI : 10.1016/j.progpolymsci.2009.03.002
, Synthesis of linear and cyclic peptide???PEG???lipids for stabilization and targeting of cationic liposome???DNA complexes, Bioorganic & Medicinal Chemistry Letters, vol.26, issue.6, pp.1618-1623, 2016.
DOI : 10.1016/j.bmcl.2016.01.079
, Characterization of Polymer Blends: Miscibility, Morphology and Interfaces, 2014.
DOI : 10.1002/9783527645602
, Rheological and mechanical behaviour of poly (lactic acid)/polyethylene glycol blends, 2011.
, Thermal stability and degradation kinetics of feedstocks for powder injection moulding ? A new way to determine optimal solid loading? Polymer Degradation and Stability 98, pp.1188-1195, 2013.
, Processing technologies for poly(lactic acid), Progress in Polymer Science, vol.33, issue.8, pp.820-852, 2008.
DOI : 10.1016/j.progpolymsci.2008.05.004
, Handbook of Biopolymers and Biodegradable Plastics: Properties, Processing and Applications, 2013.
, Polyhydroxyalkanoates--plastic Materials of the 21st Century, 2004.
, A comparative investigation on MIM418 superalloy fabricated using gas- and water-atomized powders, Powder Technology, vol.286, pp.798-806, 2015.
DOI : 10.1016/j.powtec.2015.09.023
, EPMA Powder metallurgy summer school course notes 75. Superalloys, supercomposites and superceramics, 1989.
, Contribution à l'étude de la précipitation des phases intermétalliques dans l'alliage 718, 2010.
, Metal powder injection molding (MIM): key trends and markets -Handbook of Metal Injection Molding -1. Available at, pp.9780857090669500017-10, 2016.
DOI : 10.1533/9780857096234.1
, Identification of new material model for machining simulation of Inconel 718 alloy and the effect of tool edge geometry on microstructure changes, Simulation Modelling Practice and Theory, vol.66, p.9, 2016.
DOI : 10.1016/j.simpat.2016.05.001
, Finite element simulation of machining Inconel 718 alloy including microstructure changes Available at: http://www.sciencedirect.com/science, p.9, 2016.
, Density and viscosity of the binary polyethylene glycol/CO2 systems, The Journal of Supercritical Fluids, vol.95, pp.641-668, 2014.
DOI : 10.1016/j.supflu.2014.09.045
, Available at: http://planet-terre.ens-lyon.fr/article/fluide-supercritique, xml, p.10, 2016.
, Solvent debinding of injection moulded parts with supercritical carbon dioxide : T, Japan.). Metal Powder Report, vol.52, p.41, 1997.
, Influence of the debinding method on the mechanical properties of plastic formed ceramics, Journal of the European Ceramic Society, vol.15, issue.9, pp.899-903, 1995.
DOI : 10.1016/0955-2219(95)00059-4
, Modelling solutions of hydrocarbons in dense CO2 gas, Journal of the European Ceramic Society, vol.21, issue.9, pp.1219-1227, 2001.
DOI : 10.1016/S0955-2219(00)00337-X
, Laser Diffraction Spectrometry: Fraunhofer Diffraction Versus Mie Scattering, Particle & Particle Systems Characterization, vol.53, issue.1-4, pp.14-19, 1987.
DOI : 10.1117/12.7973344
, A versatile Fraunhofer diffraction and Mie scattering based laser particle sizer, Advanced Powder Technology, vol.3, issue.1, pp.7-14, 1992.
DOI : 10.1016/S0921-8831(08)60683-4
, Adsorption of Gases in Multimolecular Layers, Journal of the American Chemical Society, vol.60, issue.2, pp.309-319, 1938.
DOI : 10.1021/ja01269a023
, Adsorption -Aspects théoriques | Techniques de l'Ingénieur Available at: http://www.techniques-ingenieur.fr/base-documentaire/procedes-chimie-bio-agro- th2/operations-unitaires-extractions-fluide-fluide-et-fluide-solide-42332210/adsorption-j2730
, Colloidal systems and interfaces, 1988.
, Rheological and surface chemical characterization of alkoxysilane treated, fine aluminum powders showing enhanced flowability and fluidization behavior for delivery applications, Powder Technology, vol.283, pp.380-388, 2015.
DOI : 10.1016/j.powtec.2015.05.044
, Characterization of flow properties of cohesive powders: A comparative study of traditional and new testing methods, Powder Technology, vol.253, pp.406-423, 2014.
DOI : 10.1016/j.powtec.2013.11.045
, Types of gas fluidization, Powder Technology, vol.7, issue.5, pp.285-292, 1973.
DOI : 10.1016/0032-5910(73)80037-3
, Evaluating flow properties of solids, Chem.Eng, vol.72, pp.163-168, 1965.
, Friction conditions in a mass of metal powder, Int.J.Powder Metall, vol.3, pp.7-13, 1967.
, Measuring the flow properties of consolidated, conditioned and aerated powders ??? A comparative study using a powder rheometer and a rotational shear cell, Powder Technology, vol.174, issue.1-2, pp.25-33, 2007.
DOI : 10.1016/j.powtec.2006.10.016
, Initiation à la rhéologie (4° Éd.) : Bases théoriques et applications expérimentales, 2014.
, Analyse de la relations structure-proprietes des melanges PVC-PMMA, Annales de Chimie Science des Mat????riaux, vol.26, issue.3, pp.79-90, 2001.
DOI : 10.1016/S0151-9107(01)80063-5
, Experiments and FE simulation for twin screw mixing of nanocomposite of polypropylene/multi-walled carbon nanotubes, Composites Science and Technology, vol.107, pp.169-176, 2015.
DOI : 10.1016/j.compscitech.2014.12.017
, Ueber die rechnerische Darstellung des Strukturgebietes der Viskosit??t, Kolloid-Zeitschrift, vol.47, issue.2, pp.176-187
DOI : 10.1007/BF01496959
, Product design and engineering: formulation of gels and pastes, 2013.
DOI : 10.1002/9783527654741
, Processing of poly(lactic acid): Characterization of chemical structure, thermal stability and mechanical properties, Polymer Degradation and Stability, vol.95, issue.2, pp.116-125, 2010.
DOI : 10.1016/j.polymdegradstab.2009.11.045
, The role of shear and stabilizer on PLA degradation, Polymer Testing, vol.51, pp.109-116, 2016.
DOI : 10.1016/j.polymertesting.2016.03.005
, Effects of fermentation residues on the melt processability and thermomechanical degradation of PHBV produced from cheese whey using mixed microbial cultures, Polymer Degradation and Stability, vol.128, pp.269-277, 2016.
DOI : 10.1016/j.polymdegradstab.2016.03.031
, Influence of processing parameters on the molecular weight and mechanical properties of poly(3-hydroxybutyrate-co-3-hydroxyvalerate), Polymer Degradation and Stability, vol.57, issue.3, pp.331-338, 1997.
DOI : 10.1016/S0141-3910(97)00028-1
, Thermal evolution of PEG-based and BRIJ-based hybrid organo-inorganic materials. FT-IR studies, Vibrational Spectroscopy, vol.71, pp.47-56, 2014.
DOI : 10.1016/j.vibspec.2013.12.010
, Study on ozone treatment of water-soluble polymers. I. Ozone degradation of polyethylene glycol in water, Journal of Applied Polymer Science, vol.20, issue.1, pp.93-103, 1976.
DOI : 10.1002/app.1976.070200109
, Thermal degradation of poly(ethyleneglycol), Polymer Degradation and Stability, vol.47, issue.2, pp.203-208, 1995.
DOI : 10.1016/0141-3910(94)00109-L
, Measurement of additional shear during sludge conditioning and dewatering, Water Research, vol.43, issue.13, pp.3249-3260, 2009.
DOI : 10.1016/j.watres.2009.04.049
, Influence of powder particle size distribution on rheological properties of 316L powder injection moulding feedstocks, Powder Technology, vol.200, issue.1-2, pp.30-36, 2010.
DOI : 10.1016/j.powtec.2010.02.003
, PIM of non-conventional particles, Ceramics International, vol.32, issue.3, pp.297-302, 2006.
DOI : 10.1016/j.ceramint.2005.03.006
, Determining critical ceramic powder volume concentration from viscosity measurements, Ceramics International, vol.26, issue.2, pp.159-164, 2000.
DOI : 10.1016/S0272-8842(99)00035-8
URL : http://ceramic.che.nthu.edu.tw/document/journal/critcial powder volume concentration.pdf
, Thermo-physical characterization of binder and feedstock for single and multiphase flow of PIM 316L feedstock, Journal of Materials Processing Technology, vol.211, issue.12, pp.2114-2122, 2011.
DOI : 10.1016/j.jmatprotec.2011.07.008
, Characterisation and replication of metallic micro-fluidic devices using three different powders processed by hot embossing, Powder Technology, vol.246, pp.284-302, 2013.
DOI : 10.1016/j.powtec.2013.05.026
URL : https://hal.archives-ouvertes.fr/hal-00982815
, Segregation measurement of powder injection molding feedstock using thermogravimetric analysis, pycnometer density and differential scanning calorimetry techniques, Advanced Powder Technology, vol.26, issue.3, pp.997-1004, 2015.
DOI : 10.1016/j.apt.2015.04.005
, Design of water debinding and dissolution stages of metal injection moulded porous Ti foam production, Materials & Design, vol.87, pp.295-302, 2015.
DOI : 10.1016/j.matdes.2015.08.018
, Morphology of y??? and y??? precipitates and thermal stability of inconel 718 type alloys, Metallurgical Transactions, vol.241, issue.1, pp.47-59, 1973.
DOI : 10.1098/rspa.1957.0133
, Étude du comportement structural de l'alliage NC 19 Fe Nb
DOI : 10.1051/jp3:1997148