W. Bleck, Cold-rolled, high-strength sheet steels for auto applications, JOM, vol.113, issue.1, pp.48-74, 1996.
DOI : 10.1007/BF03222745

L. Hamm, Stahl-ein zukunftst Rachtiger Werkstoff im Karosseriebau, Proc. IISI 27th Annual Meeting and Conference, 1993.

R. Kuziak, R. Kawalla, and S. Waengler, Advanced high strength steels for automotive industry, Archives of civil and mechanical engineering, pp.103-117, 2008.
DOI : 10.1016/S1644-9665(12)60197-6

H. B. Carry and S. C. Helzer, Modern Welding Technology, 2005.

C. Ma, D. L. Chen, S. D. Bhole, G. Boudreau, A. Lee et al., Microstructure and fracture characteristics of spot-welded DP600 steel, Materials Science and Engineering: A, vol.485, issue.1-2, pp.334-346, 2008.
DOI : 10.1016/j.msea.2007.08.010

F. Rossillon, A. Galtier, J. L. Robert, M. Duchet, A. Lens et al., Effect of Welding Cycle on the Fatigue Behaviour of Resistance Spot Welded Dual Phase Steels, Welding in the World, pp.11-12, 2008.
DOI : 10.1179/095066004225010523

P. K. Ghosh, P. C. Gupta, R. A. Avtar, and B. K. Jha, Resistance spot weldability of comparatively thick C-Mn-Cr-Mo dual phase steel sheet., ISIJ International, vol.30, issue.3, pp.233-240, 1990.
DOI : 10.2355/isijinternational.30.233
URL : https://www.jstage.jst.go.jp/article/isijinternational1989/30/3/30_3_233/_pdf

S. Daneshpour, S. Riekehr, M. Kocak, and C. H. Gerritsen, Mechanical and fatigue behaviour of laser and resistance spot welds in advanced high strength steels, Science and Technology of Welding and Joining, vol.12, issue.1, 2013.
DOI : 10.1179/174329307X164409

R. Koganti, S. Angotti, A. Joaquin, and E. Stiles, Laser Hybrid Welding of Advanced High Strength Steels (AHSS) for Automotive Body Construction, Volume 3: Design and Manufacturing, pp.699-703, 2007.
DOI : 10.1115/IMECE2007-43415

M. P. Miles, J. Pew, T. W. Nelson, and M. Li, Comparison of formability of friction stir welded and laser welded dual phase 590 steel sheets, Science and Technology of Welding and Joining, vol.45, issue.950923, pp.384-388, 2006.
DOI : 10.1016/0924-0136(94)90311-5

J. K. Larsson, Overview of joining technologies in the automotive industry, Welding Research Abroad, vol.49, issue.67, pp.29-45, 2003.

N. B. Dahotre and S. P. Harimkar, Laser Fabrication and Machining of Materials, 2008.

R. Kovacevic, Welding Process, 2012.

J. Karlsson, Two laser welding cases and suitable documentation methods, Lulea tekniska universitet, 2010.

Y. Fan, Mechanical properties of laser beam welded Ti6Al4V, 2010.

N. Sonti, Influence of Process Parameters on Laser Weld Characteristics in Aluminum Alloys, PENNSYLVANIA STATE UNIV UNIVERSITY PARK APPLIED RESEARCH LAB, 1988.

M. S. Weglowski, K. Kwiecinski, K. Krasnowski, and R. Jachym, Characteristics of Nd:YAG Laser Welded Joints of Dual Phase Steel, Archives of Civil and Mechanical Engineering, vol.9, issue.4, pp.85-97, 2009.
DOI : 10.1016/S1644-9665(12)60072-7

N. Farabi, D. L. Chen, J. Li, Y. Zhou, and S. J. Dong, Microstructure and mechanical properties of laser welded DP600 steel joints, Materials Science and Engineering: A, vol.527, issue.4-5, pp.1215-1222, 2010.
DOI : 10.1016/j.msea.2009.09.051

N. Farabi, D. L. Chen, and Y. Zhou, Microstructure and mechanical properties of laser welded dissimilar DP600/DP980 dual-phase steel joints, Journal of Alloys and Compounds, vol.509, issue.3, pp.982-989, 2011.
DOI : 10.1016/j.jallcom.2010.08.158

W. Xu, D. Westerbaan, S. S. Nayak, D. L. Chen, F. Goodwin et al., Microstructure and fatigue performance of single and multiple linear fiber laser welded DP980 dual-phase steel, Materials Science and Engineering: A, vol.553, pp.51-58, 2012.
DOI : 10.1016/j.msea.2012.05.091

R. S. Coelho, M. Corpas, J. A. Moreto, A. Jahn, J. Standfuss et al., Induction-assisted laser beam welding of a thermomechanically rolled HSLA S500MC steel: A microstructure and residual stress assessment, Materials Science and Engineering: A, vol.578, pp.125-133, 2013.
DOI : 10.1016/j.msea.2013.04.039

D. Parkes, W. Xu, D. Westerbaan, S. S. Nayak, Y. Zhou et al., Microstructure and fatigue properties of fiber laser welded dissimilar joints between high strength low alloy and dual-phase steels, Materials and Design, pp.665-675, 2013.
DOI : 10.1016/j.matdes.2013.04.076

D. Dong, Y. Liu, Y. Yang, J. Li, M. Ma et al., Microstructure and dynamic tensile behavior of DP600 dual phase steel joint by laser welding, Materials Science and Engineering: A, vol.594, pp.17-25, 2014.
DOI : 10.1016/j.msea.2013.11.047

E. A. Ahmed and U. Reisgen, Laser welding of advanced high strength steels (No. RWTH-CONV- 125622), Lehrstuhl und Institut fur Schweisstechnik und Fugetechnik, 2011.

J. Ha and H. Huh, Failure characterization of laser welds under combined loading conditions, International Journal of Mechanical Sciences, pp.40-58, 2013.
DOI : 10.1016/j.ijmecsci.2013.01.022

L. S. Mayboudi, A. M. Birk, G. Zak, and P. J. Bates, A three-dimensional thermal finite element model of laser transmission welding for lap-joint, International Journal of Modelling and Simulation, vol.29, issue.2, pp.149-155, 2009.

L. S. Mayboudi, A. M. Birk, G. Zak, and P. J. Bates, Finite volume model for laser-soot interaction for a laser transmission welding process, Journal of Laser Applications, vol.22, issue.1, pp.22-28, 2010.
DOI : 10.2351/1.3367750

N. S. Shanmugam, G. Buvanashekaran, K. Sankaranarayanasamy, and K. Manonmani, Some studies on temperature profiles in AISI 304 stainless steel sheet during laser beam welding using FE simulation, The International Journal of Advanced Manufacturing Technology, vol.198, issue.12, pp.78-94, 2009.
DOI : 10.1016/j.matdes.2005.06.006

G. Buvanashekaran, S. N. Shanmugam, K. Sankaranarayanasamy, and R. Sabarikanth, A study of laser welding modes with varying beam energy levels, Proceedings of the Institution of Mechanical Engineers, pp.1141-1156, 2009.
DOI : 10.1016/S0924-0136(97)00254-9

R. Mahnken, A. Shaban, H. Potente, and L. Wilke, Thermoviscoplastic modelling of asymmetric effects for polymers at large strains, International Journal of Solids and Structures, vol.45, issue.17, pp.45-4615, 2008.
DOI : 10.1016/j.ijsolstr.2008.03.033

H. Potente, L. Wilke, H. Ridder, R. Mahnken, and A. Shaban, Simulation of the residual stresses in the contour laser welding of thermoplastics, Polymer Engineering & Science, vol.3, issue.4, pp.767-773, 2008.
DOI : 10.1108/02644409810236920

P. Lacki and K. Adamus, Numerical simulation of the electron beam welding process, Computers & Structures, vol.89, issue.11-12, pp.977-985, 2011.
DOI : 10.1016/j.compstruc.2011.01.016

M. Turna, B. Taraba, P. Ambroz, and M. Sahul, Contribution to Numerical Simulation of Laser Welding, Physics Procedia, vol.12, pp.638-645, 2011.
DOI : 10.1016/j.phpro.2011.03.080

S. Chen, L. Li, Y. Chen, J. Dai, and J. Huang, Improving interfacial reaction nonhomogeneity during laser welding???brazing aluminum to titanium, Materials & Design, vol.32, issue.8-9, pp.4408-4416, 2011.
DOI : 10.1016/j.matdes.2011.03.074

D. Nelias, J. F. Jullien, F. Boitout, L. Dischert, and X. Noe, Finite element analysis of metallurgical phase transformations in AA 6056-T4 and their effects upon the residual stress and distortion states of a laser welded T-joint, International Journal of Pressure Vessels and Piping, vol.88, issue.1, pp.45-56, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00938373

Q. Han, D. Kim, D. Kim, H. Lee, and N. Kim, Laser pulsed welding in thin sheets of Zircaloy-4, Journal of Materials Processing Technology, vol.212, issue.5, pp.1116-1122, 2012.
DOI : 10.1016/j.jmatprotec.2011.12.022

J. Montalvo-urquizo, Z. Akbay, and A. Schmidt, Adaptive finite element models applied to the laser welding problem, Computational Materials Science, vol.46, issue.1, pp.245-254, 2009.
DOI : 10.1016/j.commatsci.2009.02.037

K. Salonitis, D. Drougas, and G. Chryssolouris, Finite element modeling of penetration laser welding of sandwich materials, Physics Procedia, vol.5, pp.327-335, 2010.
DOI : 10.1016/j.phpro.2010.08.059

S. R. Yu, Y. X. Yan, Z. M. Hao, Y. H. Yin, J. Wang et al., Analysis of Temperature Distribution and its Influencing Factors in Laser Welding of Beryllium Cylindrical Shells, Key Engineering Materials, vol.419, issue.420, pp.449-452, 2010.
DOI : 10.4028/www.scientific.net/KEM.419-420.449

G. Casalino, A. G. Olabi, N. Cipriani, and A. Rotondo, Investigation on the Residual Stress of AISI 4047 Low Alloy Steel Laser Welded, Key Engineering Materials, vol.344, pp.715-722, 2007.
DOI : 10.4028/www.scientific.net/KEM.344.715

K. R. Balasubramanian, T. Suthakar, K. Sankaranarayanasamy, and G. Buvanashekaran, Finite Element analysis of heat distribution in laser beam welding of AISI 304 Stainless Steel sheet, International Journal of Manufacturing Research, vol.7, issue.1, pp.42-58, 2012.
DOI : 10.1504/IJMR.2012.045243

N. Kuppuswamy, R. Schmidt, F. Seeger, and S. Zhang, Finite element modeling of impact strength of laser welds for automotive applications, Safety and Security Engineering II, pp.375-384, 2007.
DOI : 10.2495/SAFE070371

J. Kim and K. J. Bathe, The finite element method enriched by interpolation covers, Computers & Structures, vol.116, pp.35-49, 2013.
DOI : 10.1016/j.compstruc.2012.10.001

H. M. Jeon, P. S. Lee, and K. J. Bathe, The MITC3 shell finite element enriched by interpolation covers, Computers & Structures, vol.134, pp.128-142, 2014.
DOI : 10.1016/j.compstruc.2013.12.003

J. Kim and K. J. Bathe, Towards a procedure to automatically improve finite element solutions by interpolation covers, Computers & Structures, vol.131, pp.81-97, 2014.
DOI : 10.1016/j.compstruc.2013.09.007

R. Kramer, P. Bochev, C. Siefert, and T. Voth, An extended finite element method with algebraic constraints (XFEM-AC) for problems with weak discontinuities, Computer Methods in Applied Mechanics and Engineering, vol.266, pp.70-80, 2013.
DOI : 10.1016/j.cma.2013.07.013

D. J. Benson, Y. Bazilevs, E. De-luycker, M. C. Hsu, M. Scott et al., A generalized finite element formulation for arbitrary basis functions: From isogeometric analysis to XFEM, International Journal for Numerical Methods in Engineering, vol.27, issue.3, pp.765-785, 2010.
DOI : 10.1007/978-3-642-59223-2

S. Natarajan, D. R. Mahapatra, and S. Bordas, Integrating strong and weak discontinuities without integration subcells and example applications in an XFEM/GFEM framework, International Journal for Numerical Methods in Engineering, vol.40, issue.6, pp.269-294, 2010.
DOI : 10.1115/1.3656897
URL : http://arxiv.org/pdf/1107.4732

K. Dreau, N. Chevaugeon, and N. Moes, Studied X-FEM enrichment to handle material interfaces with higher order finite element, Computer Methods in Applied Mechanics and Engineering, vol.199, issue.29-32, pp.199-1922, 2010.
DOI : 10.1016/j.cma.2010.01.021
URL : https://hal.archives-ouvertes.fr/hal-01007338

S. Soghrati and P. H. Geubelle, A 3D interface-enriched generalized finite element method for weakly discontinuous problems with complex internal geometries, Computer Methods in Applied Mechanics and Engineering, vol.217, issue.220, pp.46-57, 2012.
DOI : 10.1016/j.cma.2011.12.010

J. Xu, C. K. Lee, and K. H. Tan, An enriched 6-node MITC plate element for yield line analysis, Computers & Structures, vol.128, pp.64-76, 2013.
DOI : 10.1016/j.compstruc.2013.07.008

N. Leconte, B. Langrand, and E. Markiewicz, Toward a Hybrid-Trefftz element with a hole for elasto-plasticity?, Journal of Computational and Applied Mathematics, vol.218, issue.1, pp.88-95, 2008.
DOI : 10.1016/j.cam.2007.04.034
URL : https://doi.org/10.1016/j.cam.2007.04.034

N. Leconte, B. Langrand, and E. Markiewicz, On some features of a plate hybrid-Trefftz displacement element containing a hole, Finite Elements in Analysis and Design, vol.46, issue.10, pp.819-828, 2010.
DOI : 10.1016/j.finel.2010.05.001

R. Piltner, Some remarks on finite elements with an elliptic hole Finite elements in analysis and design, pp.767-772, 2008.

H. Wang and Q. H. Qin, Fundamental-solution-based hybrid FEM for plane elasticity with special elements, Computational Mechanics, vol.25, issue.5, pp.515-528, 2011.
DOI : 10.1016/S0955-7997(01)00002-9

U. Icardi and F. Sola, Variable Singularity Power Wedge Element for Multilayered Composites, Universal Journal of Engineering Science, vol.2, issue.1, pp.16-29, 2014.

N. K. Mukhopadhyay, S. K. Maiti, and A. Kakodkar, Variable singularity boundary element and its applications in computation of SIFs, Computers & Structures, vol.77, issue.2, pp.141-154, 2000.
DOI : 10.1016/S0045-7949(99)00209-6

C. Cheng, Z. Niu, H. Zhou, and N. Recho, Evaluation of multiple stress singularity orders of a V-notch by the boundary element method.", Engineering analysis with boundary elements, pp.1145-1151, 2009.

S. S. Pageau and S. B. Biggers, Finite element evaluation of free-edge singular stress fields in anisotropic materials, International Journal for Numerical Methods in Engineering, vol.10, issue.13, pp.2225-2239, 1995.
DOI : 10.1016/0013-7944(78)90059-0

J. C. Michel, H. Moulinec, and P. Suquet, Effective properties of composite materials with periodic microstructure: a computational approach, Computer Methods in Applied Mechanics and Engineering, vol.172, issue.1-4, pp.109-143, 1999.
DOI : 10.1016/S0045-7825(98)00227-8

S. Masoud, R. N. Ahmad, R. S. Nancy, and P. H. , A NURBS-based interface-enriched generalized finite element method for problems with complex discontinuous gradient fields, International Journal for Numerical Methods in Engineering, vol.101, pp.950-964, 2015.

D. J. Payen and K. J. Bathe, The use of nodal point forces to improve element stresses, Computers & Structures, vol.89, issue.5-6, pp.485-495, 2011.
DOI : 10.1016/j.compstruc.2010.12.002

D. J. Payen and K. J. Bathe, Improved stresses for the 4-node tetrahedral element, Computers & Structures, vol.89, issue.13-14, pp.1265-1273, 2011.
DOI : 10.1016/j.compstruc.2011.02.009

D. J. Payen, A method to significantly improve finite element stress predictions, Doctoral dissertation, Massachusetts Institute of Technology, 2012.

K. J. Bathe, Finite element procedures, 1996.

D. Chapelle and K. J. Bathe, The finite element analysis of shells ? fundamentals, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00839738

D. J. Payen and K. J. Bathe, A stress improvement procedure, Computers & Structures, vol.112, issue.113, pp.311-326, 2012.
DOI : 10.1016/j.compstruc.2012.07.006

E. Stein and S. Ohnimus, Equilibrium method for postprocessing and error estimation in the finite element method, Computer Assisted Mechanics and Engineering Sciences, vol.4, pp.645-666, 2012.

F. Brezzi and M. Fortin, Mixed and Hybrid Finite Element Methods, 15 in Springer Series in Computational Mathematics, 1991.
DOI : 10.1007/978-1-4612-3172-1

F. Brezzi and K. J. Bathe, A discourse on the stability conditions for mixed finite element formulations, Computer Methods in Applied Mechanics and Engineering, vol.82, issue.1-3, pp.27-57, 1990.
DOI : 10.1016/0045-7825(90)90157-H

H. B. Dhia and G. Rateau, The Arlequin method as a flexible engineering design tool, International Journal for Numerical Methods in Engineering, vol.193, issue.11, pp.1442-1462, 2005.
DOI : 10.1007/BF00364080
URL : https://hal.archives-ouvertes.fr/hal-00018915

A. Ghanem, M. Torkhani, N. Mahjoubi, T. N. Baranger, and A. Combescure, Arlequin framework for multi-model, multi-time scale and heterogeneous time integrators for structural transient dynamics, Computer Methods in Applied Mechanics and Engineering, vol.254, pp.292-308, 2013.
DOI : 10.1016/j.cma.2012.08.019
URL : https://hal.archives-ouvertes.fr/hal-00956408

B. Dhia, H. Zammali, and C. , Level-Sets and Arlequin framework for dynamic contact problems, Revue Europeenne des Elements, vol.13, pp.5-7, 2004.
URL : https://hal.archives-ouvertes.fr/hal-00606777

H. Hu, S. Belouettar, and M. Potier-ferry, Multi-scale modelling of sandwich structures using the Arlequin method Part I: Linear modelling, Finite Elements in Analysis and Design, vol.45, issue.1, pp.37-51, 2008.
DOI : 10.1016/j.finel.2008.07.003

H. Qiao, Q. D. Yang, W. Q. Chen, and C. Z. Zhang, Implementation of the Arlequin method into ABAQUS: Basic formulations and applications, Advances in Engineering Software, pp.197-207, 2011.
DOI : 10.1016/j.advengsoft.2011.02.005

A. L. Gurson, Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I???Yield Criteria and Flow Rules for Porous Ductile Media, Journal of Engineering Materials and Technology, vol.99, issue.1, pp.2-15, 1977.
DOI : 10.1115/1.3443401

A. L. Gurson, POROUS RIGID-PLASTIC MATERIALS CONTAINING RIGID INCLUSIONS - YIELD FUNCTION, PLASTIC POTENTIAL, AND VOID NUCLEATION, Int. Conf. Fracture Waterloo (Canada), 1977.
DOI : 10.1016/B978-0-08-022138-0.50058-7

A. L. Gurson, Plastic flow and fracture behavior of ductile materials incorporating void nucleation, growth and coalescence, 1975.

V. Tvergaard and A. Needleman, Analysis of the cup-cone fracture in a round tensile bar, Acta Metallurgica, vol.32, issue.1, pp.157-169, 1984.
DOI : 10.1016/0001-6160(84)90213-X

A. Needleman and V. Tvergaard, An analysis of ductile rupture in notched bars, Journal of the Mechanics and Physics of Solids, vol.32, issue.6, pp.461-490, 1984.
DOI : 10.1016/0022-5096(84)90031-0

S. Acharyya and S. Dhar, A complete GTN model for prediction of ductile failure of pipe, Journal of Materials Science, vol.33, issue.5, pp.1897-1909, 2008.
DOI : 10.1016/0001-6160(85)90201-9

X. Wang and J. Shi, Validation of Johnson-Cook plasticity and damage model using impact experiment, International Journal of Impact Engineering, vol.60, pp.67-75, 2013.
DOI : 10.1016/j.ijimpeng.2013.04.010

G. R. Johnson and W. H. Cook, A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures, Proceedings of the 7th International Symposium on Ballistics, pp.541-547, 1983.

G. R. Johnson and W. H. Cook, Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures, Engineering Fracture Mechanics, vol.21, issue.1, pp.31-48, 1985.
DOI : 10.1016/0013-7944(85)90052-9

D. A. Macdougall and J. Harding, A constitutive relation and failure criterion for Ti6Al4V alloy at impact rates of strain, Journal of the Mechanics and Physics of Solids, vol.47, issue.5, pp.1157-1185, 1999.
DOI : 10.1016/S0022-5096(98)00086-6

H. W. Meyer and D. S. Kleponis, Modeling the high strain rate behavior of titanium undergoing ballistic impact and penetration, International Journal of Impact Engineering, vol.26, issue.1-10, pp.509-521, 2001.
DOI : 10.1016/S0734-743X(01)00107-5

C. Y. Tham, V. B. Tan, and H. P. Lee, Ballistic impact of a KEVLAR?? helmet: Experiment and simulations, International Journal of Impact Engineering, vol.35, issue.5, pp.304-318, 2008.
DOI : 10.1016/j.ijimpeng.2007.03.008

J. Peirs, P. Verleysen, W. Van-paepegem, and J. Degrieck, Determining the stress???strain behaviour at large strains from high strain rate tensile and shear experiments, International Journal of Impact Engineering, vol.38, issue.5, pp.406-415, 2011.
DOI : 10.1016/j.ijimpeng.2011.01.004
URL : https://hal.archives-ouvertes.fr/hal-00816798

A. Banerjee, S. Dhar, S. Acharyya, D. Datta, and N. Nayak, Determination of Johnson cook material and failure model constants and numerical modelling of Charpy impact test of armour steel, Materials Science and Engineering: A, vol.640, pp.200-209, 2015.
DOI : 10.1016/j.msea.2015.05.073

L. Schwer, Optional Strain-rate forms for the Johnson Cook Constitutive Model and the Role of the parameter Epsilon 0, 2007.

J. W. Hancock and A. C. Mackenzie, On the mechanisms of ductile failure in high-strength steels subjected to multi-axial stress-states, Journal of the Mechanics and Physics of Solids, vol.24, issue.2-3, pp.147-160, 1976.
DOI : 10.1016/0022-5096(76)90024-7

J. Liu, Y. Bai, and C. Xu, Evaluation of Ductile Fracture Models in Finite Element Simulation of Metal Cutting Processes, Journal of Manufacturing Science and Engineering, vol.136, issue.1, p.11010, 2014.
DOI : 10.1115/1.4025625

Y. Bao and T. Wierzbicki, On fracture locus in the equivalent strain and stress triaxiality space, International Journal of Mechanical Sciences, vol.46, issue.1, pp.81-98, 2004.
DOI : 10.1016/j.ijmecsci.2004.02.006

M. L. Wilkins, R. D. Streit, and J. E. Reaugh, Cumulative-strain-damage model of ductile fracture: simulation and prediction of engineering fracture tests (No. UCRL-53058), 1980.
DOI : 10.2172/6628920

F. A. Mcclintock, Plasticity aspects of fracture", Fracture: an advanced treatise 3, pp.47-225, 1971.

H. Yamasaki and R. Nishimura, Development of Material Model for Crack Propagation of Casted Aluminum, LS-DYNA Anwenderforum Frankenthal, 2007.

M. Feucht, D. Z. Sun, T. Erhart, and T. Frank, Recent development and applications of the Gurson model, Proceedings of the 5th LS-DYNA Forum, 2006.

F. Neukamm, M. Feucht, and A. Haufe, Considering damage history in crashworthiness simulations, 2009.

F. Neukamm, M. Feucht, and A. Haufe, Consistent damage modelling in the process chain of forming to crashworthiness simulations, The 7th German LS-DYNA Conference, 2008.

F. Neukamm, M. Feucht, and M. Bischoff, On the Application of Continuum Damage Models to Sheet Metal Forming Simulations, International Conference on Computational Plasticity COMPLAS X, 2009.

M. Basaran, S. D. Wolkerling, M. Feucht, F. Neukamm, D. Weichert et al., An extension of the GISSMO damage model based on lode angle dependence, LS-Dyna forum. Dynamore, 2010.

F. Neukamm, M. Feucht, A. Haufe, and K. Roll, On closing the constitutive gap between forming and crash simulation, 10th Internation LS-DYNA Users Conference, 2008.

H. Ebelsheiser, M. Feucht, and F. Neukamm, On calibrating advanced damage models using sheet metal coupon tests, LS-Dyna forum. Daimler AG, 2008.

J. Effelsberg, A. Haufe, M. Feucht, F. Neukamm, D. Bois et al., On parameter identification for the GISSMO damage model, Proceedings of the 12th international LS-DYNA users conference, 2012.

M. Basaran, Stress state dependent damage modelling with a focus on lode angle influence, 2011.

F. X. Andrade, M. Feucht, A. Haufe, and F. Neukamm, An incremental stress state dependent damage model for ductile failure prediction, International Journal of Fracture, vol.19, issue.1, pp.1-24, 2016.
DOI : 10.1080/13588265.2013.825366

T. Belytschko, An overview of semidiscretization and time integration procedures", Computational methods for transient analysis, pp.1-65, 1983.

. Ansys-academic and . Research, Release 16.2, Help System, Coupled Field Analysis Guide

K. Hibbitt and . Sorensen, ABAQUS/Explicit: User's Manual, Hibbitt, Karlsson and Sorenson Incorporated, vol.1, 2001.

L. D. Manual, An Version 970, 2003.

T. Belytschko, A survey of numerical methods and computer programs for dynamic structural analysis, Nuclear Engineering and Design, vol.37, issue.1, pp.23-34, 1976.
DOI : 10.1016/0029-5493(76)90050-9

S. W. Kirkpatrick, M. Schroeder, and J. W. Simons, Evaluation of passenger rail vehicle crashworthiness, International Journal of Crashworthiness, vol.6, issue.1, pp.95-106, 2001.
DOI : 10.1243/PIME_PROC_1993_207_222_02
URL : https://www.ara.com/Projects/SVO/Papers_white/IC2K_Train.pdf

R. D. Cook, D. S. Malkus, and M. E. Plesha, Concepts and applications of finite element method, 1989.

K. Chung and K. Shah, Finite element simulation of sheet metal forming for planar anisotropic metals, International Journal of Plasticity, vol.8, issue.4, pp.453-476, 1992.
DOI : 10.1016/0749-6419(92)90059-L

K. Chung and O. Richmond, A deformation theory of plasticity based on minimum work paths, International Journal of Plasticity, vol.9, issue.8, pp.907-920, 1993.
DOI : 10.1016/0749-6419(93)90057-W

K. Chung, S. Y. Lee, F. Barlat, Y. T. Keum, and J. M. Park, Finite element simulation of sheet forming based on a planar anisotropic strain-rate potential, International Journal of Plasticity, vol.12, issue.1, pp.93-115, 1996.
DOI : 10.1016/S0749-6419(95)00046-1

J. C. Simo and M. Ortiz, A unified approach to finite deformation elastoplastic analysis based on the use of hyperelastic constitutive equations, Computer Methods in Applied Mechanics and Engineering, vol.49, issue.2, pp.221-245, 1985.
DOI : 10.1016/0045-7825(85)90061-1

F. Armero and J. C. Simo, A priori stability estimates and unconditionally stable product formula algorithms for nonlinear coupled thermoplasticity, International Journal of Plasticity, vol.9, issue.6, pp.749-782, 1993.
DOI : 10.1016/0749-6419(93)90036-P

F. Auricchio and R. L. Taylor, A return-map algorithm for general associative isotropic elasto-plastic materials in large deformation regimes, International Journal of Plasticity, vol.15, issue.12, pp.1359-1378, 1999.
DOI : 10.1016/S0749-6419(99)00044-3

P. Tugcu and K. W. Neale, On the implementation of anisotropic yield functions into finite strain problems of sheet metal forming, International Journal of Plasticity, vol.15, issue.10, pp.1021-1040, 1999.
DOI : 10.1016/S0749-6419(99)00023-6

K. Hashiguchi, Generalized plastic flow rule, International Journal of Plasticity, vol.21, issue.2, pp.321-351, 2005.
DOI : 10.1016/j.ijplas.2003.12.003

J. W. Yoon, D. Y. Yang, K. Chung, and F. Barlat, A general elasto-plastic finite element formulation based on incremental deformation theory for planar anisotropy and its application to sheet metal forming, International Journal of Plasticity, vol.15, issue.1, pp.35-67, 1999.
DOI : 10.1016/S0749-6419(98)00059-X

C. S. Han, K. Chung, R. H. Wagoner, and S. I. Oh, A multiplicative finite elasto-plastic formulation with anisotropic yield functions, International Journal of Plasticity, vol.19, issue.2, pp.197-211, 2003.
DOI : 10.1016/S0749-6419(01)00034-1

M. Ortiz and J. C. Simo, An analysis of a new class of integration algorithms for elastoplastic constitutive relations, International Journal for Numerical Methods in Engineering, vol.51, issue.3, pp.353-366, 1986.
DOI : 10.1007/978-1-4615-9988-3

M. Arcan, Z. A. Hashin, and A. Voloshin, A method to produce uniform plane-stress states with applications to fiber-reinforced materials, Experimental Mechanics, vol.31, issue.5, pp.141-146, 1978.
DOI : 10.1115/1.3629590

A. Voloshin and M. Arcan, Pure shear moduli of unidirectional fibre-reinforced materials (FRM), Fibre Science and Technology, vol.13, issue.2, pp.125-134, 1980.
DOI : 10.1016/0015-0568(80)90041-X

J. R. Almeida and S. N. Monteiro, The Iosipescu test method as a method to evaluate the tensile strength of brittle materials, Polymer Testing, vol.18, issue.6, pp.407-414, 1999.
DOI : 10.1016/S0142-9418(98)00043-9

J. Y. Cognard, L. Sohier, and P. Davies, A modified Arcan test to analyze the behavior of composites and their assemblies under out-of-plane loadings, Composites Part A: Applied Science and Manufacturing, vol.42, issue.1, pp.111-121, 2011.
DOI : 10.1016/j.compositesa.2010.10.012

M. A. Sutton, X. Deng, F. Ma, J. C. Newman-jr, and M. James, Development and application of a crack tip opening displacement-based mixed mode fracture criterion, International Journal of Solids and Structures, vol.37, issue.26, pp.37-3591, 2000.
DOI : 10.1016/S0020-7683(99)00055-4

M. A. Sutton, M. L. Boone, F. Ma, and J. D. Helm, A combined modeling???experimental study of the crack opening displacement fracture criterion for characterization of stable crack growth under mixed mode I/II loading in thin sheet materials, Engineering Fracture Mechanics, vol.66, issue.2, pp.171-185, 2000.
DOI : 10.1016/S0013-7944(00)00011-4

B. Langrand and A. Combescure, Non-linear and failure behaviour of spotwelds: a ???global??? finite element and experiments in pure and mixed modes I/II, International Journal of Solids and Structures, vol.41, issue.24-25, pp.41-6631, 2004.
DOI : 10.1016/j.ijsolstr.2004.06.009
URL : https://hal.archives-ouvertes.fr/hal-00450610

H. A. Kavamura and G. F. Batalha, Mechanical strength evaluation for Nd-YAG laser and electric resistance spot weld (ERSW) joint under multiaxial loading, Journal of Materials Processing Technology, vol.201, issue.1-3, pp.507-514, 2008.
DOI : 10.1016/j.jmatprotec.2007.11.172

S. H. Lin, J. Pan, T. Tyan, and P. Prasad, A general failure criterion for spot welds under combined loading conditions, International Journal of Solids and Structures, vol.40, issue.21, pp.40-5539, 2003.
DOI : 10.1016/S0020-7683(03)00341-X

J. Lemaitre, A Continuous Damage Mechanics Model for Ductile Fracture, Journal of Engineering Materials and Technology, vol.107, issue.1, pp.83-89, 1985.
DOI : 10.1115/1.3225775

F. A. Mcclintock, A Criterion for Ductile Fracture by the Growth of Holes, Journal of Applied Mechanics, vol.35, issue.2, pp.363-371, 1968.
DOI : 10.1115/1.3601204

J. R. Rice and D. M. Tracey, On the ductile enlargement of voids in triaxial stress fields???, Journal of the Mechanics and Physics of Solids, vol.17, issue.3, pp.201-217, 1969.
DOI : 10.1016/0022-5096(69)90033-7

A. C. Mackenzie, J. W. Hancock, and D. K. Brown, On the influence of state of stress on ductile failure initiation in high strength steels, Engineering Fracture Mechanics, vol.9, issue.1, pp.167-168, 1977.
DOI : 10.1016/0013-7944(77)90062-5

Y. Bao and T. Wierzbicki, A Comparative Study on Various Ductile Crack Formation Criteria, Journal of Engineering Materials and Technology, vol.126, issue.3, pp.314-324, 2004.
DOI : 10.1115/1.1755244

N. S. Ottosen and M. Ristinmaa, The mechanics of constitutive modeling, 2005.

T. Wierzbicki and L. Xue, On the effect of the third invariant of the stress deviator on ductile fracture, 2005.

L. M. Kachanov, Rupture time under creep conditions, International Journal of Fracture, vol.97, issue.1/4, pp.11-18, 1999.
DOI : 10.1023/A:1018671022008

Y. N. Rabotnov, On the equations of state for creep, Progress in Applied Mechanics, pp.307-315, 1963.

J. L. Chaboche, Continuum Damage Mechanics: Part II???Damage Growth, Crack Initiation, and Crack Growth, Journal of Applied Mechanics, vol.55, issue.1, pp.65-72, 1988.
DOI : 10.1115/1.3173662

J. Lemaitre, How to use damage mechanics, Nuclear Engineering and Design, vol.80, issue.2, pp.233-245, 1984.
DOI : 10.1016/0029-5493(84)90169-9

N. Bonora, A. Ruggiero, L. Esposito, and D. Gentile, CDM modeling of ductile failure in ferritic steels: Assessment of the geometry transferability of model parameters, International Journal of Plasticity, vol.22, issue.11, pp.2015-2047, 2006.
DOI : 10.1016/j.ijplas.2006.03.013

R. Chaouadi, D. Meester, P. Vandermeulen, and W. , Damage work as ductile fracture criterion, International Journal of Fracture, vol.2, issue.3, pp.155-164, 1994.
DOI : 10.1007/BF00020080

X. Teng, T. Wierzbicki, and M. Huang, Ballistic resistance of double-layered armor plates, International Journal of Impact Engineering, vol.35, issue.8, pp.870-884, 2008.
DOI : 10.1016/j.ijimpeng.2008.01.008

Y. Bai, Y. Bao, and T. Wierzbicki, Fracture of prismatic aluminum tubes under reverse straining, International Journal of Impact Engineering, vol.32, issue.5, pp.671-701, 2006.
DOI : 10.1016/j.ijimpeng.2005.05.002

L. Xue, Ductile fracture modeling-theory, experimental investigation and numerical verification, 2007.

C. C. Tasan, Micro-mechanical characterization of ductile damage in sheet metal, TU Delft, 2010.

A. Weck, D. S. Wilkinson, H. Toda, and M. E. , 2D and 3D Visualization of Ductile Fracture, Advanced Engineering Materials, vol.239, issue.468, pp.469-472, 2006.
DOI : 10.1002/adem.200600034
URL : https://hal.archives-ouvertes.fr/hal-00436182

A. Weck and D. S. Wilkinson, Experimental investigation of void coalescence in metallic sheets containing laser drilled holes, Acta Materialia, vol.56, issue.8, pp.1774-1784, 2008.
DOI : 10.1016/j.actamat.2007.12.035

L. Xue, Damage accumulation and fracture initiation in uncracked ductile solids subject to triaxial loading, International Journal of Solids and Structures, vol.44, issue.16, pp.5163-5181, 2007.
DOI : 10.1016/j.ijsolstr.2006.12.026
URL : https://doi.org/10.1016/j.ijsolstr.2006.12.026