M. Géradin and A. Cardona, Flexible Multibody Dynamics -A Finite Element Approach, 2001.

D. Tran, Component mode synthesis methods using interface modes. Application to structures with cyclic symmetry, Computers & Structures, vol.79, issue.2, pp.17-18, 2001.
DOI : 10.1016/S0045-7949(00)00121-8
URL : https://hal.archives-ouvertes.fr/hal-01537665

A. Sternchüss, Multi-Level Parametric Reduced Models of Rotating Bladed Disk Assemblies, 2009.

D. D. Quinn, Modal analysis of jointed structures, Journal of Sound and Vibration, vol.331, issue.1, pp.81-93, 2012.
DOI : 10.1016/j.jsv.2011.08.017

T. M. Wasfy and A. K. Noor, Computational strategies for flexible multibody systems, Applied Mechanics Reviews, vol.56, issue.6, pp.553-613, 2003.
DOI : 10.1115/1.1590354

T. Belytschko and B. J. Hsieh, Non-linear transient finite element analysis with convected co-ordinates, International Journal for Numerical Methods in Engineering, vol.95, issue.3, pp.255-271, 1973.
DOI : 10.1002/nme.1620070304

A. A. Shabana and R. Schwertassek, Equivalence of the floating frame of reference approach and finite element formulations, International Journal of Non-Linear Mechanics, vol.33, issue.3, pp.417-432, 1998.
DOI : 10.1016/S0020-7462(97)00024-3

D. D. Dekker, Efficient Modeling of Rotational Effects for Wind Turbine Structural Dynamic Analysis, 2010.

G. Dhatt, G. Touzot, and E. Lefrançois, Méthode des éléments finis, Hermes Science, 2007.

B. Simeon, On Lagrange multipliers in flexible multibody dynamics, Computer Methods in Applied Mechanics and Engineering, vol.195, issue.50-51, pp.50-51, 2006.
DOI : 10.1016/j.cma.2005.04.015

C. Hammami, Intégration de modèles de jonctions dissipatives dans la conception vibratoire de structures amorties, Ecole National Supérieure des Arts et Métiers -ENSAM, 2014.

D. Tran, Component mode synthesis methods using partial interface modes: Application to tuned and mistuned structures with cyclic symmetry, Computers & Structures, vol.87, issue.17-18, pp.17-18, 2009.
DOI : 10.1016/j.compstruc.2009.04.009
URL : https://hal.archives-ouvertes.fr/hal-01537665

P. Holzwarth and P. Eberhard, Input-output based model reduction for interconnected systems, 11th World Congress on Computational Mechanics (WCCM XI), pp.20-25, 2014.

B. Besselink, U. Tabak, A. Lutowska, N. Van-de-wouw, H. Nijmeijer et al., A comparison of model reduction techniques from structural dynamics, numerical mathematics and systems and control, Journal of Sound and Vibration, vol.332, issue.19, pp.4403-4422, 2013.
DOI : 10.1016/j.jsv.2013.03.025

U. Hetmaniuk, R. Tezaur, and C. Farhat, Review and assessment of interpolatory model order reduction methods for frequency response structural dynamics and acoustics problems, International Journal for Numerical Methods in Engineering, vol.51, issue.1, pp.1636-1662, 2011.
DOI : 10.1002/nme.212

M. H. Gutknecht, A Brief Introduction to Krylov Space Methods for Solving Linear Systems, Frontiers of Computational Science, pp.53-62, 2007.
DOI : 10.1007/978-3-540-46375-7_5
URL : http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.189.2295

D. J. Rixen, Modal Truncation Augmentation and Moment Matching : two faces of the same coin, 2009.

É. Balmès, Modèles analytiques réduits et modèles expérimentaux complets en dynamique des structures, 1997.

D. Martinez, A. Miller, and T. Carne, Combined experimental/analytical modeling of shell/payload structures, 1985.

A. Batailly and M. Legrand, Technical note: another presentation of Craig-Martinez method, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00554967

R. J. Allemang, The Modal Assurance Criterion -Twenty Years of Use and Abuse, Sound and Vibration, pp.14-20, 2003.

A. Bobillot, Méthodes de réduction pour le recalage Application au cas d'Ariane 5, 2002.

P. Gosselet, C. Rey, and D. J. Rixen, On the initial estimate of interface forces in FETI methods, Computer Methods in Applied Mechanics and Engineering, vol.192, issue.25, pp.2749-2764, 2003.
DOI : 10.1016/S0045-7825(03)00288-3
URL : https://hal.archives-ouvertes.fr/hal-00277622

É. Balmès, Use of Generalized Interface Degrees of Freedom in Component Mode Synthesis, Proceedings of the 14th International Modal Analysis Conference, pp.1-7, 1996.

C. Farhat and M. Géradin, On a component mode synthesis method and its application to incompatible substructures, Computers & Structures, vol.51, issue.5, pp.459-473, 1994.
DOI : 10.1016/0045-7949(94)90053-1

G. Vermot-des-roches, É. Balmès, H. B. Dhia, R. Lemaire, and T. Pasquet, Compatibility measure and penalized contact resolution for incompatible interfaces, Revue europ??enne de m??canique num??rique, vol.19, issue.1-3, pp.317-328, 2010.
DOI : 10.3166/ejcm.19.317-328
URL : https://hal.archives-ouvertes.fr/hal-00987025

G. Dhatt, G. Touzot, and E. Lefrançois, Méthode des éléments finis, Hermes Science, 2007.

G. Vermot-des-roches, Frequency and time simulation of squeal instabilities. Application to the design of industrial automotive brakes, 2011.
URL : https://hal.archives-ouvertes.fr/tel-00589951

J. V. Aguado, A. Huerta, F. Chinesta, and E. Cueto, Real-time monitoring of thermal processes by reduced-order modeling, International Journal for Numerical Methods in Engineering, vol.18, issue.1, pp.991-1017, 2015.
DOI : 10.1016/j.cma.2013.09.003

Y. Aoyama and G. Yagawa, Component mode synthesis for large-scale structural eigenanalysis, Computers & Structures, vol.79, issue.6, pp.605-615, 2001.
DOI : 10.1016/S0045-7949(00)00165-6

R. Shioya and G. Yagawa, Parallel finite elements of ten-million dofs based on domain decomposition method, 2004.

C. Farhat, J. Li, and P. Avery, A FETI-DP method for the parallel iterative solution of indefinite and complex-valued solid and shell vibration problems, International Journal for Numerical Methods in Engineering, vol.47, issue.3, pp.398-427, 2005.
DOI : 10.1007/978-3-642-56118-4

D. De-klerk, D. J. Rixen, and S. N. Voormeeren, General Framework for Dynamic Substructuring: History, Review and Classification of Techniques, AIAA Journal, vol.2002, issue.3, pp.1169-1181, 2008.
DOI : 10.1002/eqe.513

A. L. Hale and L. Meirovitch, A general substructure synthesis method for the dynamic simulation of complex structures, Journal of Sound and Vibration, vol.69, issue.2, pp.309-326, 1980.
DOI : 10.1016/0022-460X(80)90615-X

M. F. Kaplan, Implementation of automated multilevel substructuring for frequency response analysis of structures, 2001.

W. Gao, X. S. Li, C. Yang, and Z. Bai, An Implementation and Evaluation of the AMLS Method for Sparse Eigenvalue Problems, ACM Transactions on Mathematical Software, vol.34, issue.4, p.20, 2008.
DOI : 10.1145/1377596.1377600

D. J. Rixen, A dual Craig???Bampton method for dynamic substructuring, Journal of Computational and Applied Mathematics, vol.168, issue.1-2, pp.383-391, 2004.
DOI : 10.1016/j.cam.2003.12.014
URL : http://doi.org/10.1016/j.cam.2003.12.014

A. Shanmugam and C. Padmanabhan, A fixed???free interface component mode synthesis method for rotordynamic analysis, Journal of Sound and Vibration, vol.297, issue.3-5, pp.664-679, 2006.
DOI : 10.1016/j.jsv.2006.04.011

N. Bouhaddi and J. P. Lombard, Improved free-interface substructures representation method, Computers & Structures, vol.77, issue.3, pp.269-283, 2000.
DOI : 10.1016/S0045-7949(99)00219-9

C. U. Bucher, A modal synthesis method employing physical coordinates, free component modes, and residual flexibilities, Computers & Structures, vol.22, issue.4, pp.559-564, 1986.
DOI : 10.1016/0045-7949(86)90005-2

K. Brahmi, N. Bouhaddi, and R. Fillod, Reduction of Junction Degrees of Freedom in Certain Methods of Dynamic Substructure Synthesis, IMAC-XIII-13th, pp.1763-1769, 1995.

H. Hassis, PROPOSITION OF A NEW APPROACH FOR THE SUBSTRUCTURE METHOD, Journal of Sound and Vibration, vol.232, issue.4, pp.659-668, 2000.
DOI : 10.1006/jsvi.1999.2776

P. Garambois, S. Besset, and L. Jézéquel, Various double component mode synthesis and sub-structuring methods for dynamic mixed FEM, European Journal of Mechanics - A/Solids, vol.53, pp.196-219, 2015.
DOI : 10.1016/j.euromechsol.2015.04.005
URL : https://hal.archives-ouvertes.fr/hal-01266856

F. Kuss, Méthodes duales pour les problèmes de contact avec frottement, 2008.

D. J. Segalman, A Four-Parameter Iwan Model for Lap-Type Joints, Journal of Applied Mechanics, vol.72, issue.5, pp.752-760, 2002.
DOI : 10.1115/1.1989354

F. Renaud, Etude de l'incidence des comportements dissipatifs dans les instabilités vibratoires des systèmes de freinage, 2011.

C. Hammami, Intégration de modèles de jonctions dissipatives dans la conception vibratoire de structures amorties, Ecole National Supérieure des Arts et Métiers -ENSAM, 2014.

C. Duriez, Contact frottant entre objets déformables dans des simulations temps-réel avec retour haptique, 2004.

H. Festjens, G. Chevallier, and J. Dion, Nonlinear model order reduction of jointed structures for dynamic analysis, Journal of Sound and Vibration, vol.333, issue.7, pp.2100-2113, 2014.
DOI : 10.1016/j.jsv.2013.11.039
URL : https://hal.archives-ouvertes.fr/hal-01085371

A. Signorini, Sopra alcune questioni di statica dei sistemi continui Annali della Scuola Normale Superiore di Pisa, pp.231-251, 1933.

T. Belytschko, W. K. Liu, B. Moran, and K. L. Elkhodary, Nonlinear Finite Elements for Continua and Structures, 2014.

C. Coulomb, Théorie des machines simples, en ayant égard au frottement de leurs parties, et à la raideur des cordages, Mémoires de mathématique et de physique de l'Académie Royale, pp.161-342

V. Acary and M. Jean, Numerical simulation of monuments by the contact dynamics method Monument-98,Workshop on seismic perfomance of monuments, pp.69-78, 1998.

J. Haslinger, Least square method for solving contact problems with friction obeying the Coulomb law, Aplikace matematiky, vol.29, issue.3, pp.212-224, 1984.

P. Alart and A. Curnier, A mixed formulation for frictional contact problems prone to Newton like solution methods, Computer Methods in Applied Mechanics and Engineering, vol.92, issue.3, pp.353-375, 1991.
DOI : 10.1016/0045-7825(91)90022-X

G. , D. Saxcé, and Z. Q. Feng, The bipotential method: A constructive approach to design the complete contact law with friction and improved numerical algorithms, Mathematical and Computer Modelling, vol.28, pp.4-8, 1998.

P. Bussetta, D. Marceau, and J. Ponthot, The adapted augmented Lagrangian method: a new method for the resolution of the mechanical frictional contact problem, Computational Mechanics, vol.83, issue.2, pp.259-275, 2012.
DOI : 10.1016/j.compstruc.2005.02.013
URL : https://hal.archives-ouvertes.fr/hal-01310670

J. C. Simo, P. Wriggers, and R. L. Taylor, A perturbed Lagrangian formulation for the finite element solution of contact problems, Computer Methods in Applied Mechanics and Engineering, vol.50, issue.2, pp.163-180, 1985.
DOI : 10.1016/0045-7825(85)90088-X

D. Chamoret, Modélisation du contact : nouvelles approches numériques, 2002.

D. Chamoret, P. Saillard, A. Rassineux, and J. M. Bergheau, New smoothing procedures in contact mechanics, Journal of Computational and Applied Mathematics, vol.168, issue.1-2, pp.107-116, 2004.
DOI : 10.1016/j.cam.2003.06.007
URL : http://doi.org/10.1016/j.cam.2003.06.007

V. Acary, F. Cadoux, C. Lemaréchal, and J. Malick, A formulation of the linear discrete Coulomb friction problem via convex optimization, Zeitschrift für angewandte Mathematik und Mechanik, pp.155-175, 2011.
DOI : 10.1002/(SICI)1099-1484(200005)5:4<305::AID-CFM96>3.0.CO;2-W
URL : https://hal.archives-ouvertes.fr/inria-00495734

N. Talbi, Résolution du contact frottant entre objets déformables en temps réel et avec retour haptique, 2008.

M. Jean, The non-smooth contact dynamics method, Computer Methods in Applied Mechanics and Engineering, vol.177, issue.3-4, pp.235-257, 1999.
DOI : 10.1016/S0045-7825(98)00383-1
URL : https://hal.archives-ouvertes.fr/hal-01390459

V. Acary and B. Brogliato, Numerical methods for nonsmooth dynamical systems: applications in mechanics and electronics, 2008.
URL : https://hal.archives-ouvertes.fr/inria-00423530

M. Géradin and D. J. Rixen, Mechanical Vibrations -Theory and Application to Structural Dynamics, 1997.

G. Vermot-des-roches, Frequency and time simulation of squeal instabilities. Application to the design of industrial automotive brakes, 2011.
URL : https://hal.archives-ouvertes.fr/tel-00589951

P. Krysl, S. Lall, and J. E. Marsden, Dimensional model reduction in non???linear finite element dynamics of solids and structures, International Journal for Numerical Methods in Engineering, vol.31, issue.4, pp.479-504, 2001.
DOI : 10.1002/nme.1620310809

R. Pinnau, Model Reduction via Proper Orthogonal Decomposition Model Order Reduction: Theory, Research Aspects and Applications, vol.13, pp.95-109, 2008.
DOI : 10.1007/978-3-540-78841-6_5

F. E. Haddad, D. Ryckelynck, F. Bay, and L. Fourment, Model order reduction applied to metal forming, 12e Colloque national en calcul des structures (CSMA), 2015.
URL : https://hal.archives-ouvertes.fr/hal-01252787

L. Peng and K. Mohseni, Nonlinear model reduction via a locally weighted POD method, International Journal for Numerical Methods in Engineering, vol.141, issue.845, pp.372-396, 2016.
DOI : 10.1098/rspa.1933.0146

A. Giacoma, D. Dureisseix, A. Gravouil, and M. Rochette, Toward an optimal a priori reduced basis strategy for frictional contact problems with LATIN solver, Computer Methods in Applied Mechanics and Engineering, vol.283, pp.1357-1381, 2015.
DOI : 10.1016/j.cma.2014.09.005
URL : https://hal.archives-ouvertes.fr/hal-01090097

P. Ladevèze and L. Chamoin, No Title, Applied Mechanics and Engineering, pp.2032-2047, 2011.

J. Kim and T. D. Burton, Reduction of nonlinear structural models having nonsmooth nonlinearity, SPIE proceedings series, Society of Photo-Optical Instrumentation Engineers, 2002.
DOI : 10.1115/detc2003/vib-48435

G. Kerschen, M. Peeters, J. C. Golinval, and A. F. Vakakis, Nonlinear normal modes, Part I: A useful framework for the structural dynamicist, Mechanical Systems and Signal Processing, vol.23, issue.1, pp.170-194, 2009.
DOI : 10.1016/j.ymssp.2008.04.002
URL : https://hal.archives-ouvertes.fr/hal-01357931

W. Rhee, Linear and nonlinear model reduction in structural dynamics with application to model updating, 2000.

P. Apiwattanalunggarn, Model reduction of nonlinear structural systems using nonlinear normal modes and component mode synthesis, 2003.

R. Kuether and M. Allen, Substructuring with Nonlinear Reduced Order Models and Interface Reduction with Characteristic Constraint Modes, 55th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, p.1518, 2014.
DOI : 10.1007/978-3-319-04552-8_28

H. Q. Do, Reduced model and uncertainty propagation for frictional contact and friction induced vibration problems, 2015.

D. Martinez, A. Miller, and T. Carne, Combined experimental/analytical modeling of shell/payload structures, 1985.

A. Batailly and M. Legrand, Technical note: another presentation of Craig-Martinez method, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00554967

S. Rubin, Improved Component-Mode Representation for Structural Dynamic Analysis, AIAA Journal, vol.13, issue.8, pp.995-1006, 1975.
DOI : 10.1121/1.1910455

M. Corus, Calcul modal par sous-structuration dynamique classique, 2011.

G. Vermot-des-roches, Frequency and time simulation of squeal instabilities. Application to the design of industrial automotive brakes, 2011.
URL : https://hal.archives-ouvertes.fr/tel-00589951

G. Karypis and V. Kumar, A Fast and High Quality Multilevel Scheme for Partitioning Irregular Graphs, SIAM Journal on Scientific Computing, vol.20, issue.1, pp.359-392, 1998.
DOI : 10.1137/S1064827595287997
URL : http://glaros.dtc.umn.edu/gkhome/fetch/papers/mlSIAMSC99.pdf