S. Chatterjee, FDA Perspective on Continuous Manufacturing, IFPAC Annu. Meet, 2012.

M. Krumme, Control strategies for continuous processes, talk at 10th World Meeting on Pharmaceutics, Biopharmaceutics and Pharmaceutical Technology, 2016.

J. Khinast, Continuous Manufacturing Critical Steps and Possible Solutions, talk at 10th World Meeting on Pharmaceutics, Biopharmaceutics and Pharmaceutical Technology, 2016.

M. Te?yk, B. Milanowski, A. Ernst, and J. Lulek, Recent progress in continuous and semicontinuous processing of solid oral dosage forms: a review., Drug Dev, Ind. Pharm, pp.42-1195, 2016.

F. , G. For-industry, and P. , A Framework for Innovative Pharmaceutical Development, Manufacuring, and Quality Assurance, FDA Off, Doc, vol.16, 2004.

L. Netchacovitch, J. Thiry, C. De-bleye, P. F. Chavez, F. Krier et al., Vibrational spectroscopy and microspectroscopy analyzing qualitatively and quantitatively pharmaceutical hot melt extrudates, Journal of Pharmaceutical and Biomedical Analysis, vol.113, pp.21-33, 2014.
DOI : 10.1016/j.jpba.2015.01.051

D. Douroumis, Hot-melt Extrusion : Pharmaceutical applications, 2012.
DOI : 10.1002/9780470711415

L. Saerens, C. Vervaet, J. P. Remon, T. De, and . Beer, Process monitoring and visualization solutions for hot-melt extrusion: a review, Journal of Pharmacy and Pharmacology, vol.14, issue.2, pp.66-180, 2014.
DOI : 10.1111/jphp.12123

L. Saerens, D. Ghanam, C. Raemdonck, K. Francois, J. Manz et al., In-line solid state prediction during pharmaceutical hot-melt extrusion in a 12mm twin screw extruder using Raman spectroscopy, European Journal of Pharmaceutics and Biopharmaceutics, vol.87, issue.3, pp.606-615, 2014.
DOI : 10.1016/j.ejpb.2014.03.002

L. Saerens, C. Vervaet, J. P. Remon, T. De, and . Beer, Visualization and Process Understanding of Material Behavior in the Extrusion Barrel during a Hot-Melt Extrusion Process Using Raman Spectroscopy, Analytical Chemistry, vol.85, issue.11, pp.85-5420, 2013.
DOI : 10.1021/ac400097t

. Bradley, Implementation of transmission NIR as a PAT tool for monitoring drug transformation during HME processing., Eur, J. Pharm. Biopharm, vol.96, pp.106-122, 2015.

J. Baronsky-probst, C. V. Möltgen, W. Kessler, and R. W. Kessler, Process design and control of a twin screw hot melt extrusion for continuous pharmaceutical tamperresistant tablet production, Eur, J. Pharm. Sci, vol.87, pp.14-21, 2016.

M. T. Islam, M. Maniruzzaman, S. A. Halsey, B. Z. Chowdhry, and D. , Development of sustained-release formulations processed by hot-melt extrusion by using a quality-by-design approach, Drug Delivery and Translational Research, vol.170, issue.5, pp.377-387, 2014.
DOI : 10.1007/s13346-014-0197-8

D. Markl, P. R. Wahl, J. C. Menezes, D. M. Koller, B. Kavsek et al., Supervisory Control System for Monitoring a Pharmaceutical Hot Melt Extrusion Process, AAPS PharmSciTech, vol.14, issue.3, pp.1034-1044, 2013.
DOI : 10.1208/s12249-013-9992-7
URL : http://www.ncbi.nlm.nih.gov/pmc/articles/PMC3755147

A. Melocchi, G. Loreti, M. D. Del-curto, A. Maroni, A. Gazzaniga et al., Evaluation of Hot-Melt Extrusion and Injection Molding for Continuous Manufacturing of Immediate-Release Tablets, Journal of Pharmaceutical Sciences, vol.104, issue.6, pp.1971-1980, 2015.
DOI : 10.1002/jps.24419

L. Martinez-marcos, D. A. Lamprou, R. T. Mcburney, and G. W. Halbert, A novel hot-melt extrusion formulation of albendazole for increasing dissolution properties, International Journal of Pharmaceutics, vol.499, issue.1-2, pp.499-175, 2016.
DOI : 10.1016/j.ijpharm.2016.01.006

M. Maniruzzaman, M. M. Rana, J. S. Boateng, J. C. Mitchell, and D. Douroumis, Dissolution enhancement of poorly water-soluble APIs processed by hot-melt extrusion using hydrophilic polymers, Drug Dev, Ind. Pharm, pp.39-218, 2012.

X. Zheng, R. Yang, X. Tang, and L. , Zheng, Part I: characterization of solid dispersions of nimodipine prepared by hot-melt extrusion., Drug Dev, Ind. Pharm, pp.33-791, 2007.

Q. Ma, C. Wang, X. Li, H. Guo, J. Meng et al., Fabrication of water-soluble polymer-encapsulated As4S4 to increase oral bioavailability and chemotherapeutic efficacy in AML mice, Scientific Reports, vol.21, issue.1, p.29348, 2016.
DOI : 10.1038/cdd.2013.133

M. Maniruzzaman, S. Farias, I. J. Slipper, J. S. Boateng, B. Z. Chowdhry et al., Development and optimization of ketoconazole oral strips by means of continuous hotmelt extrusion processing, J. Pharm. Pharmacol, pp.68-890, 2016.

T. Vigh, G. Drávavölgyi, P. L. Sóti, H. Pataki, T. Igricz et al., Predicting final product properties of melt extruded solid dispersions from process parameters using Raman spectrometry, Journal of Pharmaceutical and Biomedical Analysis, vol.98, pp.98-166, 2014.
DOI : 10.1016/j.jpba.2014.05.025

S. S. Penumetcha, L. N. Gutta, H. Dhanala, S. Yamili, S. Challa et al., Hot melt extruded Aprepitant-Soluplus solid dispersion: preformulation considerations, stability and in vitro study., Drug Dev, Ind. Pharm, pp.42-1609, 2016.

G. Verstraete, J. Van-renterghem, P. J. Van-bockstal, S. Kasmi, B. G. De-geest et al., Hydrophilic thermoplastic polyurethanes for the manufacturing of highly dosed oral sustained release matrices via hot melt extrusion and injection molding, International Journal of Pharmaceutics, vol.506, issue.1-2
DOI : 10.1016/j.ijpharm.2016.04.057

A. Cossé, C. König, A. Lamprecht, and K. G. Wagner, Hot Melt Extrusion for Sustained Protein Release: Matrix Erosion and In Vitro Release of PLGA-Based Implants, AAPS PharmSciTech, vol.18, issue.1, 2016.
DOI : 10.1208/s12249-016-0548-5

T. Kipping and H. Rein, Continuous production of controlled release dosage forms based on hot-melt extruded gum arabic: Formulation development, in vitro characterization and evaluation of potential application fields, International Journal of Pharmaceutics, vol.497, issue.1-2, pp.497-533, 2016.
DOI : 10.1016/j.ijpharm.2015.11.021

C. R. Palem, N. R. Dudhipala, S. K. Battu, M. A. Repka, and M. R. Yamsani, Development, optimization and in vivo characterization of domperidone-controlled release hot-meltextruded films for buccal delivery, Drug Dev Ind Pharm, pp.42-473, 2016.

M. Maniruzzaman, M. T. Islam, S. Halsey, D. Amin, and D. Douroumis, Novel Controlled Release Polymer-Lipid Formulations Processed by Hot Melt Extrusion, AAPS PharmSciTech, vol.17, issue.1, pp.191-199, 2016.
DOI : 10.1208/s12249-015-0470-2
URL : http://www.ncbi.nlm.nih.gov/pmc/articles/PMC4766126

R. V. Tiwari, A. N. Polk, H. Patil, X. Ye, M. B. Pimparade et al., Rat Palatability Study for Taste Assessment of Caffeine Citrate Formulation Prepared via Hot-Melt Extrusion Technology, AAPS PharmSciTech, vol.18, issue.2, pp.1-8, 2015.
DOI : 10.1208/s12249-015-0447-1

M. B. Pimparade, J. T. Morott, J. B. Park, V. I. Kulkarni, S. Majumdar et al., Development of taste masked caffeine citrate formulations utilizing hot melt extrusion technology and in vitro?in vivo evaluations, International Journal of Pharmaceutics, vol.487, issue.1-2, pp.487-167, 2015.
DOI : 10.1016/j.ijpharm.2015.04.030

N. Jedinger, S. Schrank, J. M. Fischer, K. Breinhälter, J. Khinast et al., Development of an Abuse- and Alcohol-Resistant Formulation Based on Hot-Melt Extrusion and Film Coating, AAPS PharmSciTech, vol.17, issue.1, pp.68-77, 2016.
DOI : 10.1208/s12249-015-0373-2

A. K. Vynckier, L. Dierickx, J. Voorspoels, Y. Gonnissen, J. P. Remon et al., Hotmelt co-extrusion: requirements, challenges and opportunities for pharmaceutical applications, J. Pharm. Pharmacol, pp.66-167, 2014.
DOI : 10.1111/jphp.12091

A. K. Vynckier, J. Voorspoels, J. P. Remon, and C. Vervaet, Co-extrusion as a processing technique to manufacture a dual sustained release fixed-dose combination product, Journal of Pharmacy and Pharmacology, vol.439, issue.5
DOI : 10.1111/jphp.12521

A. K. Vynckier, L. Dierickx, L. Saerens, J. Voorspoels, Y. Gonnissen et al., Hot-melt co-extrusion for the production of fixed-dose combination products with a controlled release ethylcellulose matrix core, International Journal of Pharmaceutics, vol.464, issue.1-2, pp.464-65, 2014.
DOI : 10.1016/j.ijpharm.2014.01.028

L. Dierickx, B. Van-snick, T. Monteyne, T. De-beer, J. P. Remon et al., Coextruded solid solutions as immediate release fixed-dose combinations, Eur, J. Pharm. Biopharm, pp.88-502, 2014.
DOI : 10.1016/j.ejpb.2014.06.010

E. J. Laukamp, A. K. Vynckier, J. Voorspoels, M. Thommes, and J. Breitkreutz, Development of sustained and dual drug release co-extrusion formulations for individual dosing, European Journal of Pharmaceutics and Biopharmaceutics, vol.89
DOI : 10.1016/j.ejpb.2014.12.027

A. K. Vynckier, M. De-beer, T. Monteyne, J. Voorspoels, T. De-beer et al., Enteric protection of naproxen in a fixed-dose combination product produced by hotmelt co-extrusion, Int. J. Pharm, pp.491-243, 2015.

S. Li, T. Yu, Y. Tian, C. P. Mccoy, D. S. Jones et al., Mechanochemical Synthesis of Pharmaceutical Cocrystal Suspensions via Hot Melt Extrusion: Feasibility Studies and Physicochemical Characterization, Molecular Pharmaceutics, vol.13, issue.9, 2016.
DOI : 10.1021/acs.molpharmaceut.6b00134

K. Boksa, A. Otte, and R. , Matrix-Assisted Cocrystallization (MAC) Simultaneous Production and Formulation of Pharmaceutical Cocrystals by Hot-Melt Extrusion, Journal of Pharmaceutical Sciences, vol.103, issue.9
DOI : 10.1002/jps.23983

X. Liu, M. Lu, Z. Guo, L. Huang, X. Feng et al., Improving the Chemical Stability of Amorphous Solid Dispersion with Cocrystal Technique by Hot Melt Extrusion, Pharmaceutical Research, vol.85, issue.9
DOI : 10.1007/s11095-011-0605-4

. Snowden, Continuous cocrystallisation of carbamazepine and trans-cinnamic acid via melt extrusion processing, CrystEngComm, vol.16, pp.3573-3583, 2014.

A. Melocchi, F. Parietti, A. Maroni, A. Foppoli, A. Gazzaniga et al., Hot-melt extruded filaments based on pharmaceutical grade polymers for 3D printing by fused deposition modeling, International Journal of Pharmaceutics, vol.509, issue.1-2, pp.509-255, 2016.
DOI : 10.1016/j.ijpharm.2016.05.036

K. Pietrzak, A. Isreb, and M. A. , Alhnan, A flexible-dose dispenser for immediate and extended release 3D printed tablets, Eur, J. Pharm. Biopharm, pp.96-380, 2015.

T. C. Okwuosa, D. Stefaniak, B. Arafat, A. Isreb, K. W. Wan et al., A Lower Temperature FDM 3D Printing for the Manufacture of Patient-Specific Immediate Release Tablets, Pharmaceutical Research, vol.35, issue.33, pp.1-9, 2016.
DOI : 10.1007/s11095-016-1995-0

M. A. Repka, S. K. Battu, S. B. Upadhye, S. Thumma, M. M. Crowley et al., Pharmaceutical applications of hot-melt extrusion: Part II., Drug Dev, Ind. Pharm, pp.33-1043, 2007.

J. Liu, F. Zhang, and J. W. Mcginity, Properties of lipophilic matrix tablets containing phenylpropanolamine hydrochloride prepared by hot-melt extrusion., Eur, J. Pharm

C. W. Yeung and H. Rein, Hot-melt extrusion of sugar-starch-pellets, Int, J. Pharm, vol.493, pp.390-403, 2015.

S. Bialleck and H. Rein, Preparation of starch-based pellets by hot-melt extrusion, European Journal of Pharmaceutics and Biopharmaceutics, vol.79, issue.2, pp.440-448, 2011.
DOI : 10.1016/j.ejpb.2011.04.007

E. Mehuys, J. P. Remon, and C. Vervaet, Production of enteric capsules by means of hot-melt extrusion, Eur, J. Pharm. Sci, vol.24, pp.207-212, 2005.

D. Li, G. Guo, R. Fan, J. Liang, X. Deng et al., PLA/F68/Dexamethasone implants prepared by hot-melt extrusion for controlled release of anti-inflammatory drug to implantable medical devices: I. Preparation, characterization and hydrolytic degradation study, International Journal of Pharmaceutics, vol.441, issue.1-2, pp.441-365, 2013.
DOI : 10.1016/j.ijpharm.2012.11.019

I. Ghosh, J. Snyder, R. Vippagunta, M. Alvine, R. Vakil et al., Comparison of HPMC based polymers performance as carriers for manufacture of solid dispersions using the melt extruder, International Journal of Pharmaceutics, vol.419, issue.1-2, pp.419-431, 2011.
DOI : 10.1016/j.ijpharm.2011.05.073

C. De-brabander, C. Vervaet, and J. P. Remon, Development and evaluation of sustained release mini-matrices prepared via hot melt extrusion, Journal of Controlled Release, vol.89, issue.2, pp.235-282, 2003.
DOI : 10.1016/S0168-3659(03)00075-0

G. Loreti, A. Maroni, M. D. Del-curto, A. Melocchi, A. Gazzaniga et al., Evaluation of hot-melt extrusion technique in the preparation of HPC matrices for prolonged release, European Journal of Pharmaceutical Sciences, vol.52, pp.52-77, 2014.
DOI : 10.1016/j.ejps.2013.10.014

E. Verhoeven, T. R. De-beer, G. Van-den-mooter, J. P. Remon, and C. Vervaet, Influence of formulation and process parameters on the release characteristics of ethylcellulose sustained-release mini-matrices produced by hot-melt extrusion, European Journal of Pharmaceutics and Biopharmaceutics, vol.69, issue.1
DOI : 10.1016/j.ejpb.2007.10.007

M. A. Repka, K. Gutta, S. Prodduturi, M. Munjal, and S. P. Stodghill, Characterization of cellulosic hot-melt extruded films containing lidocaine., Eur, J. Pharm. Biopharm, pp.59-189, 2005.

S. Qi, A. Gryczke, P. Belton, and D. Q. Craig, Characterisation of solid dispersions of paracetamol and EUDRAGIT? E prepared by hot-melt extrusion using thermal, microthermal and spectroscopic analysis, International Journal of Pharmaceutics, vol.354, issue.1-2, pp.354-158, 2008.
DOI : 10.1016/j.ijpharm.2007.11.048

S. U. Schilling, C. D. Bruce, N. H. Shah, A. W. Malick, and J. W. Mcginity, Citric acid monohydrate as a release-modifying agent in melt extruded matrix tablets, International Journal of Pharmaceutics, vol.361, issue.1-2, pp.361-158, 2008.
DOI : 10.1016/j.ijpharm.2008.05.035

A. Q. Vo, X. Feng, J. T. Morott, M. B. Pimparade, R. Tiwari et al., A novel floating controlled release drug delivery system prepared by hot-melt extrusion, European Journal of Pharmaceutics and Biopharmaceutics, vol.98
DOI : 10.1016/j.ejpb.2015.11.015

B. Claeys, R. Vandeputte, B. G. De-geest, J. P. Remon, and C. , Vervaet, pH-independent immediate release polymethacrylate formulations ? an observational study, Drug Dev Ind Pharm, pp.42-578, 2016.
DOI : 10.3109/03639045.2015.1057151

J. Albers, R. Alles, K. Matthée, K. Knop, J. S. Nahrup et al., Mechanism of drug release from polymethacrylate-based extrudates and milled strands prepared by hotmelt extrusion., Eur, J. Pharm. Biopharm, pp.71-387, 2009.

H. Liu, P. Wang, X. Zhang, F. Shen, and C. G. Gogos, Effects of extrusion process parameters on the dissolution behavior of indomethacin in Eudragit? E PO solid dispersions, International Journal of Pharmaceutics, vol.383, issue.1-2
DOI : 10.1016/j.ijpharm.2009.09.003

S. D. Han, S. W. Jung, S. W. Jang, H. J. Jung, M. Son et al., Preparation of Solid Dispersion of Dronedarone Hydrochloride with Soluplus? by Hot Melt Extrusion Technique for Enhanced Drug Release, Chemical and Pharmaceutical Bulletin, vol.63, issue.4, pp.63-295, 2015.
DOI : 10.1248/cpb.c14-00725

J. Djuris, I. Nikolakakis, S. Ibric, Z. Djuric, and K. Kachrimanis, Preparation of carbamazepine?Soluplus? solid dispersions by hot-melt extrusion, and prediction of drug?polymer miscibility by thermodynamic model fitting, European Journal of Pharmaceutics and Biopharmaceutics, vol.84, issue.1, pp.228-265, 2013.
DOI : 10.1016/j.ejpb.2012.12.018

M. Windbergs, C. J. Strachan, and P. Kleinebudde, Influence of structural variations on drug release from lipid/polyethylene glycol matrices., Eur, J. Pharm. Sci, vol.37, pp.555-62, 2009.

U. Quintavalle, D. Voinovich, B. Perissutti, F. Serdoz, G. Grassi et al., Preparation of sustained release co-extrudates by hot-melt extrusion and mathematical modelling of in vitro/in vivo drug release profiles, European Journal of Pharmaceutical Sciences, vol.33, issue.3, pp.33-282, 2008.
DOI : 10.1016/j.ejps.2007.12.008

J. B. Park, C. Y. Kang, W. S. Kang, H. G. Choi, H. K. Han et al., New investigation of distribution imaging and content uniformity of very low dose drugs using hot-melt extrusion method, International Journal of Pharmaceutics, vol.458, issue.2, pp.458-245, 2013.
DOI : 10.1016/j.ijpharm.2013.10.027

A. Almeida, S. Possemiers, M. N. Boone, T. De-beer, T. Quinten et al., Ethylene vinyl acetate as matrix for oral sustained release dosage forms produced via hot-melt extrusion., Eur, J. Pharm. Biopharm, pp.77-297, 2011.

G. P. Andrews, O. A. Abudiak, and D. S. Jones, Physicochemical Characterization of Hot Melt Extruded Bicalutamide?Polyvinylpyrrolidone Solid Dispersions, Journal of Pharmaceutical Sciences, vol.99, issue.3, pp.99-1322, 2010.
DOI : 10.1002/jps.21914

Y. Song, L. Wang, P. Yang, R. M. Wenslow, B. Tan et al., Physicochemical Characterization of Felodipine-Kollidon VA64 Amorphous Solid Dispersions Prepared by Hot-Melt Extrusion, Journal of Pharmaceutical Sciences, vol.102, issue.6, pp.1915-1923, 2013.
DOI : 10.1002/jps.23538

I. Ozgüney, D. Shuwisitkul, and R. Bodmeier, Development and characterization of extended release Kollidon SR mini-matrices prepared by hot-melt extrusion., Eur, J. Pharm

B. B. Alsulays, V. Kulkarni, S. M. Alshehri, B. K. Almutairy, E. A. Ashour et al., Preparation and evaluation of enteric coated tablets of hot melt extruded lansoprazole, Drug Dev, Ind. Pharm, pp.1-29, 2016.

M. Maniruzzaman, J. S. Boateng, M. J. Snowden, and D. , Douroumis, A review of hot-melt extrusion: process technology to pharmaceutical products, 2012.

K. Vithani, Y. Cuppok, S. Mostafa, I. J. Slipper, M. J. Snowden et al., Diclofenac sodium sustained release hot melt extruded lipid matrices, Pharmaceutical Development and Technology, vol.209, issue.5, pp.531-539, 2014.
DOI : 10.1111/j.2042-7158.1977.tb11368.x

K. Vithani, M. Maniruzzaman, I. J. Slipper, S. Mostafa, C. Miolane et al., Sustained release solid lipid matrices processed by hot-melt extrusion (HME), Colloids Surfaces B Biointerfaces, pp.110-403, 2013.
DOI : 10.1016/j.colsurfb.2013.03.060

J. S. Lafountaine, J. W. Mcginity, and R. O. Williams, Challenges and Strategies in Thermal Processing of Amorphous Solid Dispersions: A Review, AAPS PharmSciTech, vol.17, issue.1, pp.43-55, 2016.
DOI : 10.1208/s12249-015-0393-y

S. U. Schilling, H. L. Lirola, N. H. Shah, A. Waseem-malick, and J. W. Mcginity, Influence of plasticizer type and level on the properties of Eudragit? S100 matrix pellets prepared by hot-melt extrusion, Journal of Microencapsulation, vol.241, issue.6, pp.27-521, 2010.
DOI : 10.1080/10409230600767551

E. Snejdrova and M. Dittrich, Pharmaceutical Applications of Plasticized Polymers, of Recent Advances in Plasticizers, InTech, 2012.
DOI : 10.5772/36543

M. A. Repka and J. W. Mcginity, Influence of vitamin E TPGS on the properties of hydrophilic films produced by hot-melt extrusion., Int, J. Pharm, vol.202, pp.63-70, 2000.

H. Karandikar, R. Ambardekar, A. Kelly, T. Gough, and A. Paradkar, Systematic identification of thermal degradation products of HPMCP during hot melt extrusion process, Int, J. Pharm, pp.486-252, 2015.

M. M. Crowley, F. Zhang, J. J. Koleng, and J. W. Mcginity, Stability of polyethylene oxide in matrix tablets prepared by hot-melt extrusion, Biomaterials, vol.23, issue.21, pp.4241-4249, 2002.
DOI : 10.1016/S0142-9612(02)00187-4

S. Thumma, M. A. Elsohly, S. Q. Zhang, W. Gul, and M. A. Repka, Influence of plasticizers on the stability and release of a prodrug of Delta(9)-tetrahydrocannabinol incorporated in poly (ethylene oxide) matrices., Eur, J. Pharm. Biopharm, pp.70-605, 2008.

M. M. Crowley, F. Zhang, M. A. Repka, S. Thumma, S. B. Upadhye et al., Pharmaceutical applications of hot-melt extrusion: part I., Drug Dev, Ind. Pharm, pp.33-909, 2007.

I. Özgüney, D. Shuwisitkul, and R. Bodmeier, Development and characterization of extended release Kollidon® SR mini-matrices prepared by hot-melt extrusion, Eur, J. Pharm

C. Wu and J. W. Mcginity, Non-traditional plasticization of polymeric films, International Journal of Pharmaceutics, vol.177, issue.1, pp.15-27, 1999.
DOI : 10.1016/S0378-5173(98)00312-3

F. Siepmann, V. Le-brun, and J. Siepmann, Drugs acting as plasticizers in polymeric systems: A quantitative treatment, Journal of Controlled Release, vol.115, issue.3, pp.298-306, 2006.
DOI : 10.1016/j.jconrel.2006.08.016

M. M. Crowley, A. Fredersdorf, B. Schroeder, S. Kucera, S. Prodduturi et al., The influence of guaifenesin and ketoprofen on the properties of hot-melt extruded polyethylene oxide films., Eur, J. Pharm. Sci, pp.22-409, 2004.

E. Snejdrova and M. Dittrich, Pharmaceutically Used Plasticizers, Chapter 3 of Recent Advances in Plasticizers, 2012.

M. Stankovi?, H. W. Frijlink, and W. L. Hinrichs, Polymeric formulations for drug release prepared by hot melt extrusion: application and characterization, Drug Discovery Today, vol.20, issue.7, pp.812-823, 2015.
DOI : 10.1016/j.drudis.2015.01.012

R. V. Tiwari, H. Patil, and M. A. Repka, Contribution of hot-melt extrusion technology to advance drug delivery in the 21st century, Expert Opinion on Drug Delivery, vol.39, issue.10, pp.451-464, 2016.
DOI : 10.1007/978-1-4614-8432-5_14

P. Fyhr and K. Downie, Extended release drug delivery technology, Innov. Pharm. Technol, pp.80-86, 2013.

J. R. Robinson and V. H. Lee, Controlled drug delivery : fundamentals and applications, Dekker, 1987.
DOI : 10.1201/b14193

A. Nokhodchi, S. Raja, P. Patel, and K. Asare-addo, The Role of Oral Controlled Release Matrix Tablets in Drug Delivery Systems, pp.175-187, 2012.

A. Amkraut, J. B. Eckenhoff, and K. Nichols, Osmotic delivery of peptides and macromolecules, Advanced Drug Delivery Reviews, vol.4, issue.2, pp.255-276, 1990.
DOI : 10.1016/0169-409X(89)90021-5

J. Siepmann and F. Siepmann, Modeling of diffusion controlled drug delivery, Journal of Controlled Release, vol.161, issue.2, pp.351-62, 2012.
DOI : 10.1016/j.jconrel.2011.10.006

J. B. Clarke, J. W. Hastie, L. H. Kihlborg, R. Metselaar, and M. M. Thackeray, Definitions of terms relating to phase transitions of the solid state, IUPAC Recommendations, 1994.

J. Siepmann and F. Siepmann, Mathematical modeling of drug dissolution, Int, J. Pharm, vol.453, pp.12-24, 2013.

M. L. Bruschi, Strategies to modify the drug release from pharmaceutical systems, 2015.

P. Colombo, R. Bettini, P. Santi, and N. Peppas, Swellable matrices for controlled drug delivery: gel-layer behaviour, mechanisms and optimal performance, Pharm. Sci
DOI : 10.1016/S1461-5347(00)00269-8

F. Siepmann, Mathematical modeling of drug delivery, Int, J. Pharm, vol.364, pp.328-343, 2008.

P. Colombo, P. Catellani, N. A. Peppas, L. Maggi, and U. Conte, Swelling characteristics of hydrophilic matrices for controlled release New dimensionless number to describe the swelling and release behavior, International Journal of Pharmaceutics, vol.88, issue.1-3, pp.88-99, 1992.
DOI : 10.1016/0378-5173(92)90307-N

A. Martinez-ruvalcaba, Swelling characterization and drug delivery kinetics of polyacrylamide-co-itaconic acid/chitosan hydrogels, eXPRESS Polym, Lett, vol.3, pp.25-32, 2008.

A. Akhgari, S. Rezaee, and A. Kuchak, Evaluation of the swelling, erosion and drug release from Polysaccharide matrix tablets based on pectin and inulin, pp.51-58, 2011.

T. Tajiri, S. Morita, R. Sakamoto, M. Suzuki, S. Yamanashi et al., Release mechanisms of acetaminophen from polyethylene oxide/polyethylene glycol matrix tablets utilizing magnetic resonance imaging, International Journal of Pharmaceutics, vol.395, issue.1-2, pp.395-147, 2010.
DOI : 10.1016/j.ijpharm.2010.05.021

H. Li and X. Gu, Correlation between drug dissolution and polymer hydration: A study using texture analysis, International Journal of Pharmaceutics, vol.342, issue.1-2, pp.18-25, 2007.
DOI : 10.1016/j.ijpharm.2007.04.024

R. Bettini, M. C. Bonferoni, P. Colombo, L. Zanelotti, and C. Caramella, Drug release kinetics and front movement in matrix tablets containing diltiazem or metoprolol/?carrageenan complexes, Biomed Res. Int, pp.1-8, 2014.

P. Colombo, R. Bettini, P. L. Catellani, P. Santi, and N. A. Peppas, Drug volume fraction profile in the gel phase and drug release kinetics in hydroxypropylmethyl cellulose matrices containing a soluble drug, European Journal of Pharmaceutical Sciences, vol.9, issue.1, pp.33-40, 1999.
DOI : 10.1016/S0928-0987(99)00039-1

P. Colombo, R. Bettini, and N. A. Peppas, Observation of swelling process and diffusion front position during swelling in hydroxypropyl methyl cellulose (HPMC) matrices containing a soluble drug, Journal of Controlled Release, vol.61, issue.1-2, pp.61-83, 1999.
DOI : 10.1016/S0168-3659(99)00104-2

P. Colombo, R. Bettini, P. Santi, A. De-ascentiis, and N. A. Peppas, Analysis of the swelling and release mechanisms from drug delivery systems with emphasis on drug solubility and water transport, Journal of Controlled Release, vol.39, issue.2-3, pp.39-231, 1996.
DOI : 10.1016/0168-3659(95)00158-1

C. Maderuelo, A. Zarzuelo, and J. M. Lanao, Critical factors in the release of drugs from sustained release hydrophilic matrices, Journal of Controlled Release, vol.154, issue.1, pp.2-19, 2011.
DOI : 10.1016/j.jconrel.2011.04.002

C. J. Kim, Effects of Drug Solubility, Drug Loading, and Polymer Molecular Weight on Drug Release from Polyox? Tablets, Drug Development and Industrial Pharmacy, vol.24, issue.7, pp.645-651, 1998.
DOI : 10.1023/A:1015913207052

N. Follonier, E. Doelker, and E. T. Cole, Various ways of modulating the release of diltiazem hydrochloride from hot-melt extruded sustained release pellets prepared using polymeric materials, Journal of Controlled Release, vol.36, issue.3, pp.36-243, 1995.
DOI : 10.1016/0168-3659(95)00041-6

H. Kojima, K. Yoshihara, T. Sawada, H. Kondo, and K. Sako, Extended release of a large amount of highly water-soluble diltiazem hydrochloride by utilizing counter polymer in polyethylene oxides (PEO)/polyethylene glycol (PEG) matrix tablets, European Journal of Pharmaceutics and Biopharmaceutics, vol.70, issue.2, pp.70-556, 2008.
DOI : 10.1016/j.ejpb.2008.05.032

H. Li, R. J. Hardy, and X. Gu, Effect of Drug Solubility on Polymer Hydration and Drug Dissolution from Polyethylene Oxide (PEO) Matrix Tablets, AAPS PharmSciTech, vol.9, issue.2, pp.437-480, 2008.
DOI : 10.1208/s12249-008-9060-x

M. Dimitrov and N. Lambov, Study of Verapamil hydrochloride release from compressed hydrophilic Polyox-Wsr tablets, International Journal of Pharmaceutics, vol.189, issue.1, pp.105-111, 1999.
DOI : 10.1016/S0378-5173(99)00242-2

A. Apicella, B. Cappello, M. A. Del-nobile, M. I. La-rotonda, G. Mensitieri et al., Nicolais, Poly(ethylene oxide) (PEO) and different molecular weight PEO blends monolithic devices for drug release, pp.14-83, 1993.
DOI : 10.1016/0142-9612(93)90215-n

J. Petrovi?, S. Ibri?, G. Betz, J. Parojci?, and Z. Duri?, Application of dynamic neural networks in the modeling of drug release from polyethylene oxide matrix tablets, European Journal of Pharmaceutical Sciences, vol.38, issue.2
DOI : 10.1016/j.ejps.2009.07.007

V. Kumar, G. C. Soni, and S. K. Prajapati, Sustained Release Hydrophilic Matrix Tablet of Ibuprofen : Influence of Polymers on, In-Vitro Release and Bioavailability, pp.68-83, 2012.

N. Wu, L. S. Wang, D. C. Tan, S. M. Moochhala, and Y. Y. Yang, Mathematical modeling and in vitro study of controlled drug release via a highly swellable and dissoluble polymer matrix: polyethylene oxide with high molecular weights, Journal of Controlled Release, vol.102, issue.3, pp.569-581, 2005.
DOI : 10.1016/j.jconrel.2004.11.002

M. Hubbe, Poly Ehtylene Oxide -Mini-Encyclopedia of Papermaking Wet-End Chemistry Additives and Ingredients, their Composition, Functions, Strategies for Use, 2016.

G. Gallet, S. Carroccio, P. Rizzarelli, S. Karlsson, S. Nmr et al., Thermal degradation of poly(ethylene oxide?propylene oxide?ethylene oxide) triblock copolymer: comparative study by, Polymer, issue.Guildf, pp.43-1081, 2002.

P. Malik, M. Castro, and C. Carrot, Thermal degradation during melt processing of poly(ethylene oxide), poly(vinylidenefluoride-co-hexafluoropropylene) and their blends in the presence of additives, for conducting applications, Polymer Degradation and Stability, vol.91, issue.4, pp.91-634, 2006.
DOI : 10.1016/j.polymdegradstab.2005.01.020
URL : https://hal.archives-ouvertes.fr/hal-00455063

N. S. Vrande?i?, M. Erceg, M. Jaki?, and I. Klari?, Kinetic analysis of thermal degradation of poly(ethylene glycol) and poly(ethylene oxide)s of different molecular weight, Thermochimica Acta, vol.498, issue.1-2, pp.498-71, 2010.
DOI : 10.1016/j.tca.2009.10.005

E. Verhoeven, T. R. De-beer, E. Schacht, G. Van-den-mooter, J. P. Remon et al., Influence of polyethylene glycol/polyethylene oxide on the release characteristics of sustained-release ethylcellulose mini-matrices produced by hot-melt extrusion: in vitro and in vivo evaluations, European Journal of Pharmaceutics and Biopharmaceutics, vol.72, issue.2, pp.72-463, 2009.
DOI : 10.1016/j.ejpb.2009.01.006

L. Ma, L. Deng, and J. Chen, Applications of poly(ethylene oxide) in controlled release tablet systems: a review, Drug Development and Industrial Pharmacy, vol.9, issue.7, pp.40-845, 2013.
DOI : 10.1081/DDC-120037485

M. Yang, P. Wang, H. Suwardie, and C. Gogos, Determination of acetaminophen's solubility in poly(ethylene oxide) by rheological, thermal and microscopic methods, International Journal of Pharmaceutics, vol.403, issue.1-2, pp.403-83, 2011.
DOI : 10.1016/j.ijpharm.2010.10.026

T. D. Company, Product safety assessment POLYOX TM Resins, pp.1-6, 2013.

L. Maggi, R. Bruni, and U. Conte, High molecular weight polyethylene oxides (PEOs) as an alternative to HPMC in controlled release dosage forms., Int, J. Pharm, pp.195-229, 2000.

C. R. Gupta, G. K. Kishore, and J. V. Ratna, Development and evaluation of aceclofenac matrix tablets using polyethylene oxides as sustained release polymers, Journal of Pharmacy Research, vol.6, issue.2, pp.249-254, 2013.
DOI : 10.1016/j.jopr.2013.02.007

S. U. Choi, J. Lee, and Y. W. Choi, Development of a Directly Compressible Poly(Ethylene Oxide) Matrix for the Sustained-Release of Dihydrocodeine Bitartrate, Drug Development and Industrial Pharmacy, vol.51, issue.10
DOI : 10.1007/BF01037958

D. Tan, B. Zhao, S. Moochhala, and Y. Y. Yang, Sustained-release of caffeine from a polymeric tablet matrix: An in vitro and pharmacokinetic study, Materials Science and Engineering: B, vol.132, issue.1-2, pp.143-146, 2006.
DOI : 10.1016/j.mseb.2006.02.031

L. Maggi, L. Segale, M. L. Torre, M. E. Ochoa, and U. Conte, Dissolution behaviour of hydrophilic matrix tablets containing two different polyethylene oxides (PEOs) for the controlled release of a water-soluble drug. Dimensionality study, Biomaterials, vol.23, issue.4, pp.23-1113, 2002.
DOI : 10.1016/S0142-9612(01)00223-X

C. J. Kim, Drug Release from Compressed Hydrophilic POLYOX?WSR Tablets, Journal of Pharmaceutical Sciences, vol.84, issue.3
DOI : 10.1002/jps.2600840308

L. Yang, G. Venkatesh, and R. Fassihi, Characterization of Compressibility and Compactibility of Poly(ethylene oxide) Polymers for Modified Release Application by Compaction Simulator, Journal of Pharmaceutical Sciences, vol.85, issue.10, pp.1085-1090, 1996.
DOI : 10.1021/js960039v

X. Zhang, M. Wang, P. Li, A. Wang, R. Liang et al., Application of hot-melt extrusion technology for designing an elementary osmotic pump system combined with solid dispersion for a novel poorly water-soluble antidepressant, Pharmaceutical Development and Technology, vol.50, issue.8, pp.1-9, 2015.
DOI : 10.1016/j.ijpharm.2012.12.007

S. Missaghi, P. Patel, T. P. Farrell, H. Huatan, and A. R. Rajabi-siahboomi, Investigation of Critical Core Formulation and Process Parameters for Osmotic Pump Oral Drug Delivery, AAPS PharmSciTech, vol.15, issue.1, pp.149-60, 2014.
DOI : 10.1208/s12249-013-0040-4

. Mahajan, Osmotic capsules: A universal oral, controlled-release drug delivery dosage form, J. Control. Release, vol.152, pp.264-269, 2011.

J. L. Stringer and N. A. Peppas, Diffusion of small molecular weight drugs in radiation-crosslinked poly(ethylene oxide) hydrogels, Journal of Controlled Release, vol.42, issue.2, pp.195-202, 1996.
DOI : 10.1016/0168-3659(96)01457-5

S. G. Choi, S. E. Lee, B. S. Kang, C. L. Ng, E. Davaa et al., Thermosensitive and Mucoadhesive Sol-Gel Composites of Paclitaxel/Dimethyl-?-Cyclodextrin for Buccal Delivery, PLoS ONE, vol.1002, issue.10, p.109090, 2014.
DOI : 10.1371/journal.pone.0109090.t003

R. Bukka, M. Dwivedi, L. Nargund, and K. Prakasam, Formulation and Evaluation of Felodipine Buccal Films containing Polyethylene Oxide, Int. J. Res. Pharm. Biomed

G. R. Adelli, T. Hingorani, N. Punyamurthula, S. P. Balguri, and S. Majumdar, Evaluation of topical hesperetin matrix film for back-of-the-eye delivery, Eur, J. Pharm. Biopharm, pp.92-74, 2015.

P. K. Mididoddi and M. A. Repka, Characterization of hot-melt extruded drug delivery systems for onychomycosis, European Journal of Pharmaceutics and Biopharmaceutics, vol.66, issue.1, pp.95-105, 2007.
DOI : 10.1016/j.ejpb.2006.08.013

G. , D. Colo, and Y. Zambito, A study of release mechanisms of different ophthalmic drugs from erodible ocular inserts based on poly(ethylene oxide)., Eur, J. Pharm. Biopharm, vol.54, pp.193-202, 2002.

G. , D. Colo, S. Burgalassi, P. Chetoni, M. P. Fiaschi et al., Gelforming erodible inserts for ocular controlled delivery of ofloxacin, Int. J. Pharm, pp.215-101, 2001.

G. , D. Colo, S. Burgalassi, P. Chetoni, M. P. Fiaschi et al., Relevance of polymer molecular weight to the in vitro/in vivo performances of ocular inserts based on poly(ethylene oxide)., Int, J. Pharm, vol.220, pp.169-77, 2001.

F. Yu, K. Prashantha, J. Soulestin, M. F. Lacrampe, and P. Krawczak, Plasticizedstarch/poly(ethylene oxide) blends prepared by extrusion, Carbohydr. Polym, pp.91-253, 2013.
DOI : 10.1016/j.carbpol.2012.08.008

L. Dierickx, L. Saerens, A. Almeida, T. De-beer, J. P. Remon et al., Co-extrusion as manufacturing technique for fixed-dose combination mini-matrices, Eur, J. Pharm. Biopharm, pp.81-683, 2012.
DOI : 10.1016/j.ejpb.2012.03.018
URL : https://biblio.ugent.be/publication/3062003/file/3062071.pdf

T. Quinten, T. De-beer, A. Almeida, J. Vlassenbroeck, L. Van-hoorebeke et al., Development and evaluation of injection-molded sustained-release tablets containing ethylcellulose and polyethylene oxide., Drug Dev, Ind. Pharm, pp.37-149, 2011.

A. Almeida, L. Brabant, F. Siepmann, T. De-beer, W. Bouquet et al., Sustained release from hot-melt extruded matrices based on ethylene vinyl acetate and polyethylene oxide., Eur, J. Pharm. Biopharm, pp.82-526, 2012.

F. Zhang and J. W. Mcginity, Properties of Sustained-Release Tablets Prepared by Hot-Melt Extrusion, Pharmaceutical Development and Technology, vol.39, issue.8, pp.241-50, 1999.
DOI : 10.1016/0378-5173(87)90196-7

J. G. Lyons, P. Blackie, and C. L. Higginbotham, The significance of variation in extrusion speeds and temperatures on a PEO/PCL blend based matrix for oral drug delivery, International Journal of Pharmaceutics, vol.351, issue.1-2
DOI : 10.1016/j.ijpharm.2007.09.041

M. R. Mucalo, M. J. Rathbone, J. J. Perkasa, B. Jalil, and K. Lumpur, Melt-extruded polyethylene oxide ( PEO ) rods as drug delivery vehicles : Formulation , performance as controlled release devices and the influence of co-extruded excipients on drug release profiles, pp.85-95, 2012.

D. M. Schachter, J. Xiong, and G. C. , Solid state NMR perspective of drug?polymer solid solutions: a model system based on poly(ethylene oxide), International Journal of Pharmaceutics, vol.281, issue.1-2, pp.281-89, 2004.
DOI : 10.1016/j.ijpharm.2004.05.024

C. E. De-castro, J. J. Bonvent, M. C. Da-silva, F. L. Castro, and F. C. Giacomelli, Influence of Structural Features on the Cellular Uptake Behavior of Non-Targeted Polyester-Based Nanocarriers, Macromolecular Bioscience, vol.45, issue.11, 2016.
DOI : 10.1002/mabi.201600138

E. Senses, A. Faraone, and P. Akcora, Microscopic Chain Motion in Polymer Nanocomposites with, Dynamically Asymmetric Interphases., Sci. Rep, vol.6, p.29326, 2016.

J. Zhai, R. Suryadinata, B. Luan, N. Tran, T. M. Hinton et al., Amphiphilic brush polymers produced using the RAFT polymerisation method stabilise and reduce the cell cytotoxicity of lipid lyotropic liquid crystalline nanoparticles, Faraday Discuss., vol.114, 2016.
DOI : 10.1038/ncomms9915

S. K. Simotwo, C. Delre, and V. Kalra, Supercapacitor Electrodes Based on High-Purity Electrospun Polyaniline and Polyaniline?Carbon Nanotube Nanofibers, ACS Applied Materials & Interfaces, vol.8, issue.33
DOI : 10.1021/acsami.6b03463

E. Kaunisto, M. Marucci, P. Borgquist, and A. Axelsson, Mechanistic modelling of drug release from polymer-coated and swelling and dissolving polymer matrix systems, International Journal of Pharmaceutics, vol.418, issue.1
DOI : 10.1016/j.ijpharm.2011.01.021

E. Kaunisto, S. Abrahmsen-alami, P. Borgquist, A. Larsson, B. Nilsson et al., A mechanistic modelling approach to polymer dissolution using magnetic resonance microimaging, Journal of Controlled Release, vol.147, issue.2, pp.147-232, 2010.
DOI : 10.1016/j.jconrel.2010.07.102

A. Körner, A. Larsson, L. Piculell, and B. Wittgren, Tuning the Polymer Release from Hydrophilic Matrix Tablets by Mixing Short and Long Matrix Polymers, Journal of Pharmaceutical Sciences, vol.94, issue.4, pp.94-759, 2005.
DOI : 10.1002/jps.20288

A. Körner, A. Larsson, Å. Andersson, and L. , Swelling and polymer erosion for poly(ethylene oxide) tablets of different molecular weights polydispersities, Journal of Pharmaceutical Sciences, vol.99, issue.3
DOI : 10.1002/jps.21892

P. Borgquist, A. Körner, L. Piculell, A. Larsson, and A. Axelsson, A model for the drug release from a polymer matrix tablet?effects of swelling and dissolution, Journal of Controlled Release, vol.113, issue.3, pp.216-225, 2006.
DOI : 10.1016/j.jconrel.2006.05.004

J. T. Leskinen, M. A. Hakulinen, M. Kuosmanen, J. Ketolainen, S. Abrahmsén-alami et al., Monitoring of swelling of hydrophilic polymer matrix tablets by ultrasound techniques, International Journal of Pharmaceutics, vol.404, issue.1-2, pp.404-142, 2010.
DOI : 10.1016/j.ijpharm.2010.11.026

S. Abrahmsén-alami, A. Körner, I. Nilsson, and A. Larsson, New release cell for NMR microimaging of tablets. Swelling and erosion of poly(ethylene oxide), Int, J. Pharm, pp.342-105, 2007.

D. Kiss, K. Süvegh, T. Marek, L. Dévényi, C. Novák et al., Tracking the physical aging of poly(ethylene oxide): A technical note, AAPS PharmSciTech, vol.7, issue.4, pp.95-98, 2006.
DOI : 10.1208/pt070495

C. Herry, A. Monti, F. Vauzelle-kervroedan, P. Oury, and L. Michel, Reducing abuse of orally administered prescription opioids using formulation technologies, Journal of Drug Delivery Science and Technology, vol.23, issue.2
DOI : 10.1016/S1773-2247(13)50017-7

J. Maincent and F. Zhang, Recent advances in abuse-deterrent technologies for the delivery of opioids, International Journal of Pharmaceutics, vol.510, issue.1, pp.57-72, 2016.
DOI : 10.1016/j.ijpharm.2016.06.012

S. Muppalaneni, D. J. Mastropietro, and H. Omidian, Crush resistance and insufflation potential of poly(ethylene oxide)-based abuse deterrent formulations, Expert Opinion on Drug Delivery, vol.3, issue.10, pp.1-8, 2016.
DOI : 10.1517/17425247.2012.698606

D. Pon, K. Awuah, D. Curi, E. Okyere, and C. S. Stern, Combating an Epidemic of Prescription Opioid Abuse, J. Calif. Dent. Assoc, pp.43-673, 2015.

Z. Rahman, Y. Yang, M. Korang-yeboah, A. Siddiqui, X. Xu et al., Assessing impact of formulation and process variables on in-vitro performance of directly compressed abuse deterrent formulations, International Journal of Pharmaceutics, vol.502, issue.1-2, pp.502-138, 2016.
DOI : 10.1016/j.ijpharm.2016.02.029

S. Nainar, K. Rajiah, S. Angamuthu, D. Prabakaran, and R. Kasibhatta, Biopharmaceutical Classification System in In-vitro/In-vivo Correlation: Concept and Development Strategies in Drug Delivery, Pharm Res Trop, J. Pharm. Res. April Trop J Pharm Res, pp.1111-319, 2012.

C. Álvarez, I. Núñez, J. J. Torrado, J. Gordon, H. Potthast et al., Investigation on the Possibility of Biowaivers for Ibuprofen, Journal of Pharmaceutical Sciences, vol.100, issue.6, pp.2343-2349, 2011.
DOI : 10.1002/jps.22472

Y. A. Ribeiro, J. D. De-oliveira, M. I. Leles, S. A. Juiz, and I. M. , Thermal decomposition of some analgesic agents, Journal of thermal analysis, vol.4, issue.6, pp.46-1645, 1996.
DOI : 10.1007/BF01980770

J. A. Baird, B. Van-eerdenbrugh, and L. S. Taylor, A Classification System to Assess the Crystallization Tendency of Organic Molecules from Undercooled Melts, Journal of Pharmaceutical Sciences, vol.99, issue.9, pp.99-3787, 2010.
DOI : 10.1002/jps.22197

E. Dudognon, F. Danède, M. Descamps, and N. T. Correia, Evidence for a New Crystalline Phase of Racemic Ibuprofen, Pharmaceutical Research, vol.24, issue.12, pp.2853-2858, 2008.
DOI : 10.1007/s11095-008-9655-7

T. Quinten, G. P. Andrews, T. De-beer, L. Saerens, W. Bouquet et al., Preparation and Evaluation of Sustained-Release Matrix Tablets Based on Metoprolol and an Acrylic Carrier Using Injection Moulding, AAPS PharmSciTech, vol.13, issue.4, pp.1197-211, 2012.
DOI : 10.1208/s12249-012-9848-6

M. M. Crowley, B. Schroeder, A. Fredersdorf, S. Obara, M. Talarico et al., Physicochemical properties and mechanism of drug release from ethyl cellulose matrix tablets prepared by direct compression and hot-melt extrusion, International Journal of Pharmaceutics, vol.269, issue.2, pp.269-509, 2004.
DOI : 10.1016/j.ijpharm.2003.09.037

T. Quinten, T. De-beer, C. Vervaet, and J. P. Remon, Evaluation of injection moulding as a pharmaceutical technology to produce matrix tablets., Eur, J. Pharm. Biopharm, pp.71-145, 2009.

B. B. Alsulays, J. B. Park, S. M. Alshehri, J. T. Morott, S. M. Alshahrani et al., Influence of molecular weight of carriers and processing parameters on the extrudability, drug release, and stability of fenofibrate formulations processed by hot-melt extrusion, Journal of Drug Delivery Science and Technology, vol.29, pp.29-189, 2015.
DOI : 10.1016/j.jddst.2015.07.011

J. G. Drobny, Handbook of Thermoplastic Elastomers, 2014.

S. U. Schilling and J. W. Mcginity, Novel application of hot-melt extrusion for the preparation of monolithic matrices containing enteric-coated particles, Int, J. Pharm, pp.400-424, 2010.

S. K. Mallapragada and N. A. Peppas, Crystal dissolution-controlled release systems: I. Physical characteristics and modeling analysis, Journal of Controlled Release, vol.45, issue.1, pp.87-94, 1997.
DOI : 10.1016/S0168-3659(96)01549-0

C. Isha, S. Nimrata, A. C. Rana, and G. Surbhi, Oral sustained release drug delivery system: an overview, Intenational Res, J. Pharm, vol.3, pp.57-62, 2012.

M. Yang, P. Wang, C. Y. Huang, M. S. Ku, H. Liu et al., Solid dispersion of acetaminophen and poly(ethylene oxide) prepared by hot-melt mixing., Int, J. Pharm, pp.395-53, 2010.

K. L. Vora, G. Buckton, and D. Clapham, The use of dynamic vapour sorption and near infrared spectroscopy (DVS-NIR) to study the crystal transitions of theophylline and the report of a new solid-state transition, Eur, J. Pharm. Sci, pp.22-97, 2004.

P. Szterner, B. Legendre, and M. Sghaier, Thermodynamic properties of polymorphic forms of theophylline. Part I: DSC, TG, X-ray study, Journal of Thermal Analysis and Calorimetry, vol.256, issue.1, pp.99-325, 2010.
DOI : 10.1007/s10973-009-0186-1

M. J. Chauhan and S. A. Patel, A Concise Review on Sustained Drug Delivery System and Its Opportunities, Am. J. PharmTech Res, vol.2, pp.227-238, 2012.

S. U. Schilling, N. H. Shah, A. Waseem-malick, and J. W. Mcginity, Properties of melt extruded enteric matrix pellets, Eur, J. Pharm. Biopharm, pp.74-352, 2010.

E. Roblegg, E. Jäger, A. Hodzic, G. Koscher, S. Mohr et al., Development of sustained-release lipophilic calcium stearate pellets via hot melt extrusion, European Journal of Pharmaceutics and Biopharmaceutics, vol.79, issue.3
DOI : 10.1016/j.ejpb.2011.07.004

G. Verstraete, P. Mertens, W. Grymonpré, P. J. Van-bockstal, T. De-beer et al., A comparative study between melt granulation/compression and hot melt extrusion/injection molding for the manufacturing of oral sustained release thermoplastic polyurethane matrices, International Journal of Pharmaceutics, vol.513, issue.1-2, pp.513-602, 2016.
DOI : 10.1016/j.ijpharm.2016.09.072

A. L. Sarode, H. Sandhu, N. Shah, W. Malick, and H. Zia, Hot melt extrusion (HME) for amorphous solid dispersions: Predictive tools for processing and impact of drug???polymer interactions on supersaturation, European Journal of Pharmaceutical Sciences, vol.48, issue.3, pp.48-371, 2012.
DOI : 10.1016/j.ejps.2012.12.012

F. Zhang and J. W. Mcginity, Properties of Hot-Melt Extruded Theophylline Tablets Containing Poly(Vinyl Acetate), Drug Development and Industrial Pharmacy, vol.64, issue.9, pp.931-942, 2000.
DOI : 10.1021/js960221w

N. Follonier, E. Doelker, and E. T. Cole, Various ways of modulating the release of diltiazem hydrochloride from hot-melt extruded sustained release pellets prepared using polymeric materials, Journal of Controlled Release, vol.36, issue.3, pp.36-243, 1995.
DOI : 10.1016/0168-3659(95)00041-6

D. Palmer, M. Levina, T. P. Farrell, and A. , Rajabi-siahboomi, The Influence of Polymer Concentration on Release of Poorly Soluble Drugs from Polyethylene Oxide Extended Release Matrices, Color. Doc, 2010.

H. Leuenberger, J. D. Bonny, and M. Kolb, Percolation effects in matrix-type controlled drug release systems, International Journal of Pharmaceutics, vol.115, issue.2, pp.217-224, 1995.
DOI : 10.1016/0378-5173(94)00266-8

M. Fukuda, N. A. Peppas, and J. W. Mcginity, Properties of sustained release hot-melt extruded tablets containing chitosan and xanthan gum., Int, J. Pharm, pp.310-90, 2006.

M. V. Velasco, J. L. Ford, P. Rowe, and A. R. Rajabi-siahboomi, Influence of drug:hydroxypropylmethylcellulose ratio, drug and polymer particle size and compression force on the release of diclofenac sodium from HPMC tablets, Journal of Controlled Release, vol.57, issue.1, pp.75-85, 1999.
DOI : 10.1016/S0168-3659(98)00110-2

. Concheiro, Mechanical and drug-release properties of atenolol-Carbomer hydrophilic matrix tablets, J. Control. Release, vol.17, pp.267-276, 1991.

N. Sarisuta and P. Mahahpunt, Effects of Compression Force and Type of Fillers on Release of Diclofenac Sodium from Matrix Tablets, Drug Development and Industrial Pharmacy, vol.20, issue.6, pp.1049-1061, 1994.
DOI : 10.1002/jps.2600711216

J. H. De-smidt, J. G. Fokkens, H. Grijseels, and D. J. Crommelin, Dissolution of Theophylline Monohydrate and Anhydrous Theophylline in Buffer Solutions, Journal of Pharmaceutical Sciences, vol.75, issue.5, pp.75-497, 1986.
DOI : 10.1002/jps.2600750515

E. Shefter and T. Higuchi, Dissolution Behavior of Crystalline Solvated and Nonsolvated Forms of Some Pharmaceuticals, Journal of Pharmaceutical Sciences, vol.52, issue.8, pp.781-791, 1963.
DOI : 10.1002/jps.2600520815

. Colorcon, Dissolution Testing for POLYOX TM Extended Release Matrices, Appl. Data, 2009.

. Colorcon, The Influence of In Vitro Dissolution Method on the Release of a Highly Water Soluble Drug from Polyethylene Oxide and Hypromellose Hydrophilic Extended Release Matrices, Appl. Data, 2010.

C. Oriane and . Du, rue du Molinel 59800 LILLE FRANCE cantin_oriane@yahoo.fr CURRICULUM VITAE Education 2013-2016: PhD student at INSERM U1008, 1989.

O. Cantin, F. Siepmann, F. Danede, J. F. Willart, Y. Karrout et al., Saint Priest (France) Trainee at Pharmaceutical applications laboratory, Formulation of matrix systems by direct compression Publications, PEO HotMeltExtrudates for Controlled Drug Delivery: Importance of the Molecular Weight, pp.36-130, 2012.

O. Cantin, F. Siepmann, J. Siepmann, and Y. Karrout, How ibuprofen release is controlled from PEO hot melt extrudates?, 4 th Congress on Innovation in Drug Delivery, Site-Specific Drug Delivery, pp.25-28, 201620-09.

O. Cantin, F. Siepmann, Y. Karrout, and J. Siepmann, How is drug release controlled from PEO hot-melt-extrudates?,10 th World Meeting on Pharmaceutics, Biopharmaceutics and Pharmaceutical Technology, pp.4-07, 201618-04.

O. Cantin, F. Siepmann, J. Siepmann, and Y. Karrout, Robustness of drug release from PEO-based hot-melt-extrudates, 10 th World Meeting on Pharmaceutics, Biopharmaceutics and Pharmaceutical Technology, pp.4-07, 201628-04.

A. Krupa, O. Cantin, J. Siepmann, and R. Jachowicz, HME and supercritical carbon dioxide impregnationas co-processing methods to improve the dissolution of tadalafil, 10 th World Meeting on Pharmaceutics, Biopharmaceutics and Pharmaceutical Technology, pp.4-07, 2016151-04.

O. Cantin, F. Danède, F. Siepmann, Y. Karrout, and J. Siepmann, Drug release from PEO-hot melt extrudates: impact of the drug loading, st European Conference on Pharmaceutics, pp.13-14, 201550-04.

O. Cantin, F. Siepmann, Y. Karrout, and J. Siepmann, Hot Melt Extrusion can Provide More Robust Drug Release from PEO Matrices than Direct Compression, st European Conference on Pharmaceutics, pp.13-14, 201552-04.

O. Cantin, F. Danède, F. Siepmann, Y. Karrout, and J. Siepmann, Drug release from PEO-hot melt extrudates: impact of the drug loading, ème Journée André Verber, p.15, 2015.

A. Krupa, O. Cantin, J. Siepmann, and R. Jachowicz, Hot-melt extruded hydrophilic matrices for improved tadalafil dissolution, th Polish-German Symposium on Pharmaceutical Sciences, pp.29-30, 2015.

O. Cantin, F. Siepmann, Y. Karrout, and J. Siepmann, Development of PEO controlled release matrices: HME vs DC, 6 ème réunion annuelle de l'ITMO-ITS, pp.1-2, 2014.

O. Cantin, F. Siepmann, Y. Karrout, and J. Siepmann, The importance of HME parameters in the development of PEO extrudates with various molecular weights, AMPTEC (Advanced Materials and Pharmaceutical TECHnologies), Villeneuve d'Ascq (France), 9-11 th, Drug release from PEO-hot melt extrudates: impact of the drug loading, 9 th PSSRC Annual Symposium, pp.16-18, 2014.

O. Cantin, F. Siepmann, Y. Karrout, and J. Siepmann, Poly ethylene oxide extrudates for controlled drug delivery, 8 th PSSRC Annual Symposium, p.17, 2014.